Purification and properties of a thermostable pullulanase from Clostridium thermosulfurogenes EM1 which hydrolyses both α-1,6 and α-1,4-glycosidic linkages

Summary A novel thermostable pullulanase, secreted by the thermophilic anaerobic bacterium Clostridium thermosulfurogenes EM1, was purified and characterized. Applying anion exchange chromatography and gel filtration the enzyme was purified 47-fold and had a specific activity of 200 units/mg. The molecular mass of this thermostable enzyme was determined to be 102 000 daltons and consisted of a single subunit. The enzyme was able to attack specifically the -1,6-glycosidic linkages in pullulan and caused its complete hydrolysis to maltotriose. Surprisingly and unlike the enzyme from Klebsiella pneumoniae, the purified enzyme from this anaerobic thermophile exhibited, in addition to its debranching and pullulanase activity, an -1,4 hydrolysing activity as well. By the action of this single polypeptide chain various branched and linear polysaccharides were completely converted to two major products, namely maltose and maltotriose. The K _m values of this enzyme for pullulan and amylose were determined to be 1.33 mg/ml and 0.38 mg/ml, respectively. This debranching enzyme displays a temperature optimum at 60°–65° C and a pH optimum at 5.5–6.0. The application of this new class of pullulanase (pullulanase type II) in industry will significantly enhance the starch saccharification process. Offprint requests to: G. Antranikian     

Physiological and enzymatic characterization of a novel pullulan-degrading thermophilic Bacillus strain 3183

Summary A new thermophilic Bacillus strain 3183 (ATCC 49341) was isolated from hot-spring sediments. The organism grew on pullulan as a carbon source and showed optimum pH and temperature at pH 5.5 and 62° C, respectively, for growth. The strain reduced nitrate to nitrite both aerobically and anaerobically. It produced extracellular thermostable pullulanase and saccharidase activities which degraded pullulan and starch into maltotriose, maltose, and glucose. Medium growth conditions for pullulanase production were optimized. The optimum pH and temperature for pullulanase activity were at pH 6.0 and 75° C, respectively. The enzyme was stable at pH 5.5-7.0 and temperature up to 70° C in the absence of substrate. The K _m for pullulan at pH 6.0 and 75° C was 0.4 mg/ml. The pullulanase activity was stimulated and stabilized by Ca²⁺. It was inhibited by ethylenediaminetetraacetate (EDTA), beta and gamma-cyclodextrins but not by alpha-cyclodextrin and reagents that inhibit essential enzyme SH-groups. Offprint requests to: B. C. Saha     

Purification and properties of a thermoactive and thermostable pullulanase from Thermococcushydrothermalis, a hyperthermophilic archaeon isolated from a deep-sea hydrothermal vent

The extremely thermophilic archaeon Thermococcus hydrothermalis, isolated from a deep-sea hydrothermal vent in the East Pacific Rise at 21°N, produced an extracellular pullulanase. This enzyme was purified 97-fold to homogeneity from cell-free culture supernatant. The purified pullulanase was composed of a single polypeptide chain having an estimated molecular mass of 110 kDa (gel filtration) or 128 kDa (sodium dodecyl sulfate/polyacryl amide gel electrophoresis). The enzyme showed optimum activity at pH 5.5 and 95 °C. The thermostability and the thermoactivity were considerably increased in the presence of Ca²⁺. The enzyme was activated by 2-mercaptoethanol and dithiothreitol, whereas N-bromosuccinimide and α-cyclodextrin were inhibitors. This enzyme was able to hydrolyze, in addition to the α-1,6-glucosidic linkages in pullulan, α-1,4-glucosidic linkages in amylose and soluble starch, and can therefore be classified as a type II pullulanase or an amylopullulanase. The purified enzyme displayed Michaelis constant (K _m) values of 0.95 mg/ml for pullulan and 3.55 mg/ml for soluble starch without calcium and, in the presence of Ca²⁺, 0.25 mg/ml for pullulan and 1.45 mg/ml for soluble starch. Received: 19 November 1997 / Received revision: 9 March 1998 / Accepted: 14 March 1998     

Purifications and Enzymatic Properties of β-Amylase and Pullulanase from Bacillus cereus var. mycoides

A β-amylase and a pullulanase produced by Bacillus cereus var. mycoides were purified by means of ammonium sulfate fractionation, adsorption on starch and celite and Sephadex G–100 column chromatography. The purified enzymes were homogeneous in disc electrophoresis.

The β-amylase released only maltose from amylose, amylopectin, starch and glycogen, and the released maltose was in β-form. The pullulanase released maltose, maltotriose and maltotetraose from β-limit dextrin and maltotriose from pullulan, but not amylose-like substance from amylopectin.

The optimum pHs of β-amylase and pullulanase were about 7 and 6~6.5, respectively. The optimum temperatures of the enzymes were about 50°C. The enzymes were inhibited by the sulfhydryl reagents such as mercuric chloride and p-chloromercuribenzoate, and the inhibitions with p-chloromercuribenzoate were restored by the addition of cysteine. The molecular weights of β-amylase and pullulanase were estimated to be 35,000±5,000 and 110,000±20,000, respectively.     

Expression and biochemical characterization of a novel type I pullulanase from <Emphasis Type="Italic">Bacillus megaterium</Emphasis>

Objectives

To identify novel pullulanases from microorganisms and to investigate their biochemical characterizations.

Results

A novel pullulanase gene (BmPul) from Bacillus megaterium WW1210 was cloned and heterologously expressed in Escherichia coli. The gene has an ORF of 2814 bp encoding 937 amino acids. The recombinant pullulanase (BmPul) was purified to homogeneity and biochemically characterized. BmPul has an MW of approx. 112 kDa as indicated by SDS-PAGE. Optimum conditions were at 55 °C and pH 6.5. The enzyme was stable below 40 °C and from pH 6.5?8.5. The Km values of BmPul towards pullulan and amylopectin were 3.3 and 3.6 mg/ml, respectively. BmPul hydrolyzed pullulan to yield mainly maltotriose, indicating that it should be a type I pullulanase.

Conclusions

A novel type I pullulanase from Bacillus megaterium was identified, heterologously expressed and biochemically characterized. Its properties makes this enzyme as a good candidate for the food industry.

     

Pullulanase is a characteristic of manyKlebsiella species and functions in the degradation of starch

Summary The type strainsKlebsiella pneumoniae NCTC 9633,K.ozaenae NCTC 5050 andK.rhinoscleromatis NCTC 5046, representative for all members of the genusKlebsiella, were found to produce pullulanase (pullulan 6-glucanohydrolase, EC 3.2.1.41). In addition, 58 fresh isolates ofKlebsiella sp. of human origin were screened for growth on a defined solid medium with either maltose, maltodextrin mixture, soluble starch, glycogen, or pullulan as the sole carbon source. All of the strains showed luxurious growth on maltose and maltodextrins, seven strains grew poorly or not at all on the polymeric substrates, soluble starch, pullulan or glycogen. Three fresh isolates out of the 51 strains which did grow on each carbon source tested were examined in more detail with respect to a possible involvement of pullulanase in the utilization of -glucans. The production of pullulanase was inducible by growth of the cells on -glucans, whereas cultivation on glycerol, D-glucose or lactose did not lead to enzyme formation. The level of pullulanase activity in the three strains varied under otherwise comparable culture conditions, as did the level of a co-inducible -amylase. Comparative growth experiments on linear or branched -glucans allow the conclusion that the cooperation of hydrolases specific for 1,4--glucosidic linkages (-amylase) and for 1,6--linkages (pullulanase) is an obligatory requirement for the effective utilization of starch and glycogen.     

Purification and characterization of thermostable β-amylase and pullulanase from high-yielding Clostridium thermosulfurogenes SV2

Thermostable -amylase and pullulanase, secreted by the thermophilic anaerobic bacterium Clostridium thermosulfurogenes strain SV2, were purified by salting out with ammonium sulphate, DEAE-cellulose column chromatography, and gel filtration using Sephadex G-200. Maltose was identified as a major hydrolysis product of starch by -amylase, and maltotriose was identified as a major hydrolysis product of pullulan by pullulanase. The molecular masses of native -amylase and pullulanase were determined to be 180 and 100 kDa by gel filtration, and 210 and 80 kDa by SDS–PAGE, respectively. The temperature optima of purified -amylase and pullulanase were 70 and 75°C, respectively, and both enzymes were completely stable at 70°C for 2h. The presence of starch further increased the stability of both the enzymes to 80°C and both displayed a pH activity optimum of 6.0. The starch hydrolysis products formed by -amylase action had -anomeric form.     

Screening for and Identification of Starch-, Amylopectin-, and Pullulan-Degrading Activities in Bifidobacterial Strains

Forty-two bifidobacterial strains were screened for α-amylase and/or pullulanase activity by investigating their capacities to utilize starch, amylopectin, or pullulan. Of the 42 bifidobacterial strains tested, 19 were capable of degrading potato starch. Of these 19 strains, 11 were able to degrade starch and amylopectin, as well as pullulan. These 11 strains, which were shown to produce extracellular starch-degrading activities, included 5 strains of Bifidobacterium breve, 1 B. dentium strain, 1 B. infantis strain, 3 strains of B. pseudolongum, and 1 strain of B. thermophilum. Quantitative and qualitative enzyme activities were determined by measuring the concentrations of released reducing sugars and by high-performance thin-layer chromatography, respectively. These analyses confirmed both the inducible nature and the extracellular nature of the starch- and pullulan-degrading enzyme activities and showed that the five B. breve strains produced an activity that is consistent with type II pullulanase (amylopullulanase) activity, while the remaining six strains produced an activity with properties that resemble those of type III pullulan hydrolase.     

Purification and characterization of a thermostable pullulanase fromThermoactinomyces thalpophilus

Summary Thermoactinomyces thalpophilus No. 15 produced an extracellular pullulanase in an aerobic fermentation with soluble starch, salts, and complex nitrogen sources. Acetone fractionation, ion-exchange chromatography, and gel filtration purified the enzyme from cell-free broth 16-fold to an electrophoretically homogeneous state (specific activity, 1352 U/mg protein; yield, 4%). The purified enzyme (estimated MW 79 000) was optimally active at pH 7.0 and 70°C and retained 90% relative activity at 80°C (30 min) in the absence of substrate. The enzyme was activated by Co²⁺, inhibited by Hg²⁺, and exhibited enhanced stability in the presence of Ca²⁺. The enzyme hydrolyzed pullulan (K _m 0.32%, w/v) forming maltotriose, and hydrolyzed amylopectin (K _m 0.36%, w/v), amylopectin beta-limit dextrin (K _m 0.45%, w/v) and glycogen beta-limit dextrin (K _m 1.11%, w/v) forming maltotriose and maltose.     

Cloning, sequencing, characterization, and expression of a new α-amylase isozyme gene (amy3) from Pseudomonas sp.

A new gene encoding an -amylase has been cloned, sequenced and expressed in E. coli from an alkaliphilic Pseudomonas sp. KFCC10818. The structural gene is 1356 base pairs long and encodes a protein of 452 amino acids. The recombinant -amylase has been purified and biochemically characterized. Molecular mass of the protein deduced from SDS-PAGE was 50 kDa. The enzyme showed an activity optimum at pH 8 and at 40 °C with complete stability at pH 13 for 3 h. The enzyme released maltose and maltotriose on hydrolysis of soluble starch. Amylose was hydrolysed over 5 times faster than amylopectin by the enzyme while the hydrolysis of cyclodextrin or pullulan was negligible.     

Synthesis of Pullulan by Acetone-dried Cells and Cell-free Enzyme from Pullularia pullulans,and the Participation of Lipid Intermediate

It was demonstrated that the polysaccharide, pullulan, was synthesized from sucrose by acetone-dried cells of Pullularia pullulans or from UDPG by cell-free enzyme preparations prepared from the organism. The pullulan formed was estimated by precipitation with ethanol, and determining maltotriose produced after treating the precipitate with Aerobacter isoamylase (pullulanase). Acetone cells (5 g) shaken with 200 ml of 10% sucrose produced over 250 mg of pullulan per 100 ml after 90 hr at 30°C and pH 6.0. Cell-free enzyme produced pullulan from UDPG in the presence of ATP. ATP was essential for the biosynthesis, and ADPG could not replace for UDPG.

In addition, it was observed that a lipid containing glucose residue was formed during, the reaction. The nature of this glucolipid was examined, and possible participation of a lipid intermediate was assumed in the pullulan biosynthesis.     

Pullulanase synthesis in Klebsiella (Aerobacter) aerogenes strains growing in continuous culture

1. Pullulanase synthesis was studied in 16 classified (N.C.I.B.) strains and in an industrial strain (R) of Klebsiella aerogenes grown in chemostats containing maltose as inducer and sole carbon source. 2. Maximum synthesis was associated with carbon-limited growth at a low dilution rate (about 0.2h(-1)). The enzyme remained firmly cell-bound and seemed to be located on the cell surface. 3. Three strains had high activity (R, N.C.I.B. 5938, 8017), twelve were intermediate, and two (N.C.I.B. 8153, 9146) had negligible activity but were inducible with pullulan. 4. Pullulan similarly induced low, but adequate, activity in the other strains in conditions (nutrient limitation other than carbon-limitation) in which pullulanase was otherwise very seriously repressed. Nevertheless, in carbon limitation pullulan induced no more enzyme than did maltose, maltotriose or oligosaccharide mixtures, and ;hyperactivity' never developed on protracted culture. 5. Cyclic AMP relieved the transient repression produced by adding glucose to maltose-limited cultures and a further change to glucose-limited conditions led to constitutive pullulanase synthesis. 6. Amylomaltase and alpha-glucosidase activities were also examined but in less detail. 7. The presence of pullulanase in maltose-limited growth is discussed, but no clear function can be assigned to it at present. The molar growth yields for all the strains were very similar, and no correlation was found between the overgrowth of one strain by another and pullulanase activity. Further, any function as a general branching enzyme in polysaccharide synthesis seems unlikely.     

The high maltose-producing α-amylase of Penicillium expansum

Summary An -amylase capable of producing exceptionally high levels of maltose (74%) from starch has been identified from a strain of Penicillium expansum. The enzyme is produced extracellularly and was purified to homogeneity by starch adsorption and Sephadex gel filtration chromatography. P. expansum -amylase has a pH optimum of 4.5 and is stable in the pH range of 3.6–6.0. Other properties include a temperature optimum of 60° C, a molecular weight of 69 000 and an isoelectric point of 3.9. The most outstanding feature of the P. expansum enzyme is its ability to yield 14% more maltose and 17.1% less maltotriose than a currently used commercial enzyme. This may be partly explained by the greater affinity of this new enzyme for maltotriose (K _m=0.76 mM) relative to the commerical enzyme, Fungamyl (K _m=2.9 mM). The enzyme reported here is unique among fungal -amylases in being able to produce such high levels of maltose and its physicochemical properties suggest that it has potential for commercial development.     

Production of maltose and maltotriose from starch and pullulan by a immobilized multienzyme of pullulanase and β-amylase

Pullulanase was immobilized on tannic acid and TEAE-cellulose, and β-amylase was covalently immobilized on p-aminobenzylcellulose. Both the immobilized enzymes showed similar properties in pH and temperature optima and heat stability. On passing the pullulan solution at high temperature (50°C) through a column packed with immobilized pullulanase, only maltotriose was obtained for ten days and the half-life was about 15 days. In a continuous reaction using immobilized multienzyme, starch was completely converted into maltose at 50°C and at a space velocity of 1.2, a comparative longer half-life (20 days) was obtained. It was concluded that starch was smoothly converted into maltose with the aid of α-amylase contaminated in the immobilized pullulanase and the operational stability of the column increased with 2-5mM Ca²⁺.     

Purification of pullulanase from <Emphasis Type="Italic">Aureobasidium pullulan</Emphasis>s

Purification and characterization of pullulanase from Aureobasidium pullulans. Pullulanase was purified by using gel—filtration column then on ion exchange using Q-sepharose column yielding a single peak. Purification was further carried out on SP-sepharose column. Molecular weight of pullulanase from A. pullulans was found to be about 73 KDa on the SDS-PAGE 10%. Native-PAGE 10% showed the activity of pullulanase, using polyacrylamide gel containing pullulan. Hydrolysis products from pullulanase activity with soluble starch, glycogen and pullulan on thin layer chromatography appeared as one band which is maltotriose, while α-amylase with soluble starch and glycogen showed two bands which are maltose and maltotriose but α-amylase gave negative result with pullulan on TLC chromatography only. Pullulanase could degrade α-1,6 glycosidic linkage of the previous substrates, while amylase could degrade α-1,4 glycosidic linkage of glycogen, soluble starch and pullulan. MALDI-Ms was employed to deduce protein sequence of pullulanase.     

Characterization of recombinant amylopullulanase (gt-apu) and truncated amylopullulanase (gt-apuT) of the extreme thermophile Geobacillus thermoleovorans NP33 and their action in starch saccharification

A gene encoding amylopullulanase (gt-apu) of the extremely thermophilic Geobacillus thermoleovorans NP33 was cloned and expressed in Escherichia coli. The gene has an open reading frame of 4,965 bp that encodes a protein of 1,655 amino acids with molecular mass of 182 kDa. The six conserved regions, characteristic of GH13 family, have been detected in gt-apu. The recombinant enzyme has only one active site for α-amylase and pullulanase activities based on the enzyme kinetic analyses in a system that contains starch as well as pullulan as competing substrates and response to inhibitors. The end-product analysis confirmed that this is an endoacting enzyme. The specific enzyme activities for α-amylase and pullulanase of the truncated amylopullulanase (gt-apuT) are higher than gt-apu. Both enzymes exhibited similar temperature (60 °C) and pH (7.0) optima, although gt-apuT possessed a higher thermostability than gt-apu. The overall catalytic efficiency (K _cat/K _m) of gt-apuT is greater than that of gt-apu, with almost similar substrate specificities. The C-terminal region of gt-apu appeared to be non-essential, and furthermore, it negatively affects the substrate binding and stability of the enzyme.     

Purification and preliminary characterization of an extracellular pullulanase from Thermoanaerobium Tok6-B1

Summary Extracellular pullulanase (pullulan 6-glucanohydrolase, EC 3.2.1.41) was purified from cell free culture supernatants of Thermoanaerobium Tok6-B1 by ammonium sulphate precipitation, affinity precipitation, gel exclusion and ion exchange chromatography. A final purification factor of over 1600 was achieved. A molecular weight of 120 kD was determined by steric exclusion HPLC. Enzyme activity was specifically directed towards the 1–6 glucosidic linkages of pullulan resulting in 100% conversion to maltotriose and also possessed activity towards 1–4 linkages of starch, amylopectin and amylose producing maltooligosaccharides (DP2-DP4) as products. Maltotetraose was slowly hydrolysed to maltose. Values of K _m (% w/v) were 7.3×10^-3 for pullulan, 2.7×10^-3 for amylopectin and 4.7×10^-3 for Lintner's starch. Pullulanase activity was resistant to 6 M urea and was thermostable at temperatures up to 80°C (t _1/2 in the order of hours). Above 80°C thermal denaturation was significant (t _1/2=17 min at 85°C; 5 min at 90°C) but became less so in the presence of substrate (pullulan or starch). Thermostability was greatest at the pH activity optimum (pH 5.5) and was promoted by Ca²⁺ ions.Abbreviations BSA bovine serum albumin - EDTA ethylenediamine tetracetic acid - HPLC high performance liquid chromatography - MES 2-[N-Morpholino] ethanesulphonic acid - MOPS 3-[N-Morpholino] propanesulphonic acid - Tris tris-(hydroxymethyl)methylamine     

Characteristics and applications of recombinant thermostable amylopullulanase of Geobacillus thermoleovorans secreted by Pichia pastoris

The 3′-deleted amylopullulanase gene from the extreme thermophile Geobacillus thermoleovorans (Gt-apuΔC) was expressed extracellularly in Pichia pastoris under both methanol-inducible AOX1 and constitutive GAP promoters. The expression of the gene (Gt-apuΔC) was higher under GAP promoter (36.2 U ml⁻¹, α-amylase; 33.5 U ml⁻¹, pullulanase) than that under AOX1 promoter (32.5 and 28.6 U ml⁻¹). The heavily glycosylated Gt-apuΔC from the recombinant P. pastoris displays higher substrate specificity, thermal stability and starch saccharification efficiency than that expressed in Escherichia coli. The enzyme hydrolyses maltotriose and maltotetraose unlike that expressed in E. coli. The enzyme action on wheat bran liberates maltose and glucose without detectable amount(s) of maltooligosaccharides. The sugars released from wheat bran (glucose and maltose) could be fractionated by ultrafiltration, as confirmed by TLC and HPLC analysis. This is the first report on the production of recombinant amylopullulanase extracellularly in P. pastoris.

     

Estimation of pullulan by hydrolysis with pullulanase

A novel method for the estimation of pullulan was developed in which pullulan was hydrolysed by pullulanase. The hydrolysed product was mainly maltotriose and was determined colorimetrically using 3,5-dimethylsalicylic acid. This gave good linearity with respect to the concentration of pullulan in the fermentation broth. The content of pullulan determined in this way was less than that determined by a coupled enzyme assay and was comparable to that determined by an HPLC method. The new method was specific for estimation of pullulan, demonstrated high accuracy, and could assay pullulan from up to 3.2 mg/ml.     

Extracellular α-amylase from Streptomyces rimosus

Summary A purification procedure for an extracellular -amylase from Streptomyces rimosus, oxytetracycline-producing strain, is described. The enzyme obtained was shown to be an acidic (pI 4.75) monomer with a relative molecular mass (M_r) of 43 000, containing three cysteines involved in the catalytic activity of the enzyme. Its amino-terminal part has 57–67% homology with amylases from other Streptomyces species. S. rimosus -amylase is sensitive to higher temperatures, and partially stabilized by Ca²⁺ ions. It hydrolyses starch (optimum at pH 5.0–6.0) in an endohydrolase manner giving rise to maltotriose, maltotetraose and higher oligosaccharides. Starch granules, except those from rice, were not significantly affected by the isolated -amylase.