Proteomic analysis reveals differential protein expression by Bacillus cereus during biofilm formation

Bacillus cereus, a dairy-associated toxigenic bacterium, readily forms biofilms on various surfaces and was used to gain a better understanding of biofilm development by gram-positive aerobic rods. B. cereus DL5 was shown to readily adapt to an attached mode of growth, with dense biofilm structures developing within 18 h after inoculation when glass wool was used as a surface. Two-dimensional gel electrophoresis (2DE) revealed distinct and reproducible phenotypic differences between 2- and 18-h-old biofilm and planktonic cells (grown both in the presence and in the absence of glass wool). Whereas the 2-h-old biofilm proteome indicated expression of 15 unique proteins, the 18-h-old biofilm proteome contained 7 uniquely expressed proteins. Differences between the microcolony (2-h) proteome and the more developed biofilm (18-h) proteome were largely due to up- and down-regulation of the expression of a multitude of proteins. Selected protein spots excised from 2DE gels were subjected to N-terminal sequencing and identified with high confidence. Among the proteins were catabolic ornithine carbamoyltransferase and L-lactate dehydrogenase. Interestingly, increased levels of YhbH, a member of the sigma 54 modulation protein family which is strongly induced in response to environmental stresses and energy depletion via both sigma(B) and sigma(H), could be observed within 2 h in both attached cells and planktonic cultures growing in the presence of glass wool, indicating that this protein plays an important role in regulation of the biofilm phenotype. Distinct band differences were also found between the extracellular proteins of 18-h-old cultures grown in the presence and in the absence of glass wool.     

Impact of rpoS deletion on the proteome of Escherichia coli grown planktonically and as biofilm

To investigate the role of rpoS in gene expression of Escherichia coli cells grown as biofilms, we compared the proteomes of a rpoS mutant and the wild-type strain. Experiments were performed on planktonic cells (in exponential or stationary growth phase) and biofilms developed on glass wool. Spot-by-spot comparison of gels obtained from biofilm and planktonic wild-type organisms showed that the intensity of between 22 and 30% of detected spots was affected by the growth mode, depending of the control used. Principal component analysis, used to interpret the variations in protein spot densities, discriminated exponential-phase cells (wild-type and mutant) from the other incubation conditions and secondarily 72-old cultures. The statistical analysis demonstrated that the rpoS mutation did not significantly modify the proteome of exponential-growth phase cells, the differences involving only 3% of the proteome. However, increasing the incubation time from 8 to 72 h noticeably increased the number of changed proteins. A cluster analysis showed that RpoS plays a role in the special nature of the gene expression of biofilm cells but lower than in stationary-phase bacteria. We identified 35 rpoS-regulated proteins that were already or not described as controlled by this sigma factor. For some of them, the mode of regulation by RpoS was obviously dependent on the culture condition (planktonic vs biofilm).     

Using a multi-faceted approach to determine the changes in bacterial cell surface properties influenced by a biofilm lifestyle

Biofilm formation is a developmental process in which initial reversible adhesion is governed by physico-chemical forces, whilst irreversible adhesion is mediated by biological changes within a cell, such as the production of extracellular polymeric substances. Using two bacteria, E. coli MG1655 and B. cereus ATCC 10987, this study establishes that the surface of the bacterial cell also undergoes specific modifications, which result in biofilm formation and maintenance. Using various surface characterisation techniques and proteomics, an increase in the surface exposed proteins on E. coli cells during biofilm formation was demonstrated, along with an increase in hydrophobicity and a decrease in surface charge. For B. cereus, an increase in the surface polysaccharides during biofilm formation was found as well as a decrease in hydrophobicity and surface charge. This work therefore shows that surface modifications during biofilm formation occur and understanding these specific changes may lead to the formulation of effective biofilm control strategies in the future.     

The effects of glutaraldehyde on the control of single and dual biofilms of Bacillus cereus and Pseudomonas fluorescens

Glutaraldehyde (GLUT) was evaluated for control of single and dual species biofilms of Bacillus cereus and Pseudomonas fluorescens on stainless steel surfaces using a chemostat system. The biofilms were characterized in terms of mass, cell density, total and matrix proteins and polysaccharides. The control action of GLUT was assessed in terms of inactivation and removal of biofilm. Post-biocide action was characterized 3, 7, 12, 24, 48 and 72 h after treatment. Tests with planktonic cells were also performed for comparison. The results demonstrated that in dual species biofilms the metabolic activity, cell density and the content of matrix proteins were higher than those of either single species. Planktonic B. cereus was more susceptible to GLUT than P. fluorescens. The biocide susceptibility of dual species planktonic cultures was an average of each single species. Planktonic cells were more susceptible to GLUT than their biofilm counterparts. Biofilm inactivation was similar for both of the single biofilms while dual biofilms were more resistant than single species biofilms. GLUT at 200 mg l(-1) caused low biofilm removal (<10%). Analysis of the post-biocide treatment data revealed the ability of biofilms to recover their activity over time. However, 12 h after biocide application, sloughing events were detected for both single and dual species biofilms, but were more marked for those formed by P. fluorescens (removal >40% of the total biofilm). The overall results suggest that GLUT exerts significant antimicrobial activity against planktonic bacteria and a partial and reversible activity against B. cereus and P. fluorescens single and dual species biofilms. The biocide had low antifouling effects when analysed immediately after treatment. However, GLUT had significant long-term effects on biofilm removal, inducing significant sloughing events (recovery in terms of mass 72 h after treatment for single biofilms and 42 h later for dual biofilms). In general, dual species biofilms demonstrated higher resistance and resilience to GLUT exposure than either of the single species biofilms. P. fluorescens biofilms were more susceptible to the biocide than B. cereus biofilms.     

Sequential secretion of collagenolytic, elastolytic, and keratinolytic proteases in peptide-limited cultures of two Bacillus cereus strains isolated from wool

Aims:  To characterize the secretion of proteolytic activities against keratin, collagen and elastin in liquid cultures of Bacillus cereus IZ-06b and IZ-06r isolated from wool.
Methods and Results:  Growth of B. cereus IZ-06b and IZ-06r were characterized in batch culture. Both strains needed an organic nitrogen source, were able to grow on wool or peptone as sole carbon and nitrogen sources, and metabolized glucose, maltose and other simple sugars. Proteolytic activities were investigated in batch cultures grown in peptide-restricted, carbon-sufficient medium. Secretion of proteases was induced by peptide limitation while different proteolytic activities appeared sequentially in the growth medium. When the most available components of the peptone were depleted, collagenolytic and elastolytic proteases were produced. These were later replaced by the production of keratinolytic protease.
Conclusions:  B. cereus can adjust its proteolytic affinity profile in response to the supply of organic nitrogen and sequentially secrete proteases with activities targeted against increasingly inaccessible proteinous substrates as the nutritional availability in the environment deteriorates.
Significance and Impact of the Study:  Peptide-limited, carbon-sufficient growth media containing no proteinous substrates are well suited for protease production in B. cereus while growth conditions can be adjusted to optimize the proteolytic affinity profiles.     

Air-liquid interface biofilms of Bacillus cereus: formation, sporulation, and dispersion

Biofilm formation by Bacillus cereus was assessed using 56 strains of B. cereus, including the two sequenced strains, ATCC 14579 and ATCC 10987. Biofilm production in microtiter plates was found to be strongly dependent on incubation time, temperature, and medium, as well as the strain used, with some strains showing biofilm formation within 24 h and subsequent dispersion within the next 24 h. A selection of strains was used for quantitative analysis of biofilm formation on stainless steel coupons. Thick biofilms of B. cereus developed at the air-liquid interface, while the amount of biofilm formed was much lower in submerged systems. This suggests that B. cereus biofilms may develop particularly in industrial storage and piping systems that are partly filled during operation or where residual liquid has remained after a production cycle. Moreover, depending on the strain and culture conditions, spores constituted up to 90% of the total biofilm counts. This indicates that B. cereus biofilms can act as a nidus for spore formation and subsequently can release their spores into food production environments.     

Developing the wool proteome

The wool proteome has been largely uncharted due to a lack of database coverage, poor protein extractability and dynamic range issues. Yet, investigating correlations between wool physical properties and protein content, or characterising UV-, heat- or processing-induced protein damage requires the availability of an identifiable and identified proteome.In this study we have achieved unprecedented wool proteome identification through a strategy of comprehensive data acquisition, iterative protein identification/validation and concurrent augmentation of the sequence database. Data acquisition comprised a range of different hyphenated MS techniques including LC–MS/MS, LC–MALDI, 2D-LC–MS/MS and SDS-PAGE LC–MS. Using iterative searching of databases and search result combination using ProteinScape, a systematic expansion of identifiable proteins in the sequence database was achieved. This was followed by extensive validation and rationalisation of the protein identifications. In total, 72 complete and 30 partial ovine-specific protein sequences were added to the database, and 113 wool proteins were identified.Enhanced access to ovine-specific protein identification and characterisation will facilitate all wool fibre protein chemistry and proteomics research.     

Antagonism between Bacillus cereus and Pseudomonas fluorescens in planktonic systems and in biofilms

In the environment, many microorganisms coexist in communities competing for resources, and they are often associated as biofilms. The investigation of bacterial ecology and interactions may help to improve understanding of the ability of biofilms to persist. In this study, the behaviour of Bacillus cereus and Pseudomonas fluorescens in the planktonic and sessile states was compared. Planktonic tests were performed with single and dual species cultures in growth medium with and without supplemental FeCl3. B. cereus and P. fluorescens single cultures had equivalent growth behaviours. Also, when in co-culture under Fe-supplemented conditions, the bacteria coexisted and showed similar growth profiles. Under Fe limitation, 8 h after co-culture and over time, the number of viable B. cereus cells decreased compared with P. fluorescens. Spores were detected during the course of the experiment, but were not correlated with the decrease in the number of viable cells. This growth inhibitory effect was correlated with the release of metabolite molecules by P. fluorescens through Fe-dependent mechanisms. Biofilm studies were carried out with single and dual species using a continuous flow bioreactor rotating system with stainless steel (SS) substrata. Steady-state biofilms were exposed to a series of increasing shear stress forces. Analysis of the removal of dual species biofilms revealed that the outer layer was colonised mainly by B. cereus. This bacterium was able to grow in the outermost layers of the biofilm due to the inhibitory effect of P. fluorescens being decreased by the exposure of the cells to fresh culture medium. B. cereus also constituted the surface primary coloniser due to its favourable adhesion to SS. P. fluorescens was the main coloniser of the middle layers of the biofilm. Single and dual species biofilm removal data also revealed that B. cereus biofilms had the highest physical stability, followed by P. fluorescens biofilms. This study highlights the inadequacy of planktonic systems to mimic the behaviour of bacteria in biofilms and shows how the culturing system affects the action of antagonist metabolite molecules because dilution and consequent loss of activity occurred in continuously operating systems. Furthermore, the data demonstrate the biocontrol potential of P. fluorescens on the planktonic growth of B. cereus and the ability of the two species to coexist in a stratified biofilm structure.     

Gene expression in<Emphasis Type="Italic"> Escherichia coli</Emphasis> biofilms

DNA microarrays were used to study the gene expression profile of Escherichia coli JM109 and K12 biofilms. Both glass wool in shake flasks and mild steel 1010 plates in continuous reactors were used to create the biofilms. For the biofilms grown on glass wool, 22 genes were induced significantly (p0.05) compared to suspension cells, including several genes for the stress response (hslS, hslT, hha, and soxS), type I fimbriae (fimG), metabolism (metK), and 11 genes of unknown function (ybaJ, ychM, yefM, ygfA, b1060, b1112, b2377, b3022, b1373, b1601, and b0836). The DNA microarray results were corroborated with RNA dot blotting. For the biofilm grown on mild steel plates, the DNA microarray data showed that, at a specific growth rate of 0.05/h, the mature biofilm after 5 days in the continuous reactors did not exhibit differential gene expression compared to suspension cells although genes were induced at 0.03/h. The present study suggests that biofilm gene expression is strongly associated with environmental conditions and that stress genes are involved in E. coli JM109 biofilm formation.     

Integration and decontamination of Bacillus cereus in Pseudomonas fluorescens biofilms

Aims:  The hypothesis that surrogate planktonic pathogens ( Bacillus cereus and polystyrene microspheres) could be integrated in biofilms and protected from decontamination was tested.
Methods and Results:  Pseudomonas fluorescens biofilms were grown on polyvinyl chloride coupons in annular reactors under low nutrient conditions. After biofilm growth, B. cereus spores and polystyrene microspheres (an abiotic control) were introduced separately. Shear stress at the biofilm surface was varied between 0·15 and 1·5 N m⁻². The amount of surrogate pathogens introduced ranged from approximately 10⁵ CFU ml⁻¹ to 10¹⁰ spheres ml⁻¹. The quantity of surrogate pathogens integrated in the biofilm was proportional to the amount introduced. In 14 of the 16 cases, 0·4–3·0% of the spores or spheres introduced were measured in the biofilms. The other two cases had 10% and 21% of the spores detected. Data suggested that the spores germinated in the system. The amount of surrogate pathogens detected in the biofilms was higher in the mid-shear range. Chlorine treatment reduced the quantity of both surrogate pathogens and biofilm organisms. In one experiment, the biofilms and B. cereus recovered when the chlorine treatment was terminated.
Conclusions:  Planktonic surrogate pathogens can be integrated in biofilms and protected from chlorination decontamination.
Significance and Impact of the Study:  This knowledge assists in understanding the impact of biofilms on harbouring potential pathogens in drinking-water systems and protecting the pathogens from decontamination.     

Adhesion of Bacillus spores and Escherichia coli cells to inert surfaces: role of surface hydrophobicity

The ability of bacterial spores and vegetative cells to adhere to inert surfaces was investigated by means of the number of adherent spores (Bacillus cereus and Bacillus subtilis spores) and Escherichia coli cells and their resistance to cleaning or rinsing procedures (adhesion strength). Six materials (glass, stainless steel, polyethylene high density (PEHD), polyamide-6, polyvinyl chloride, and Teflon) were tested. Slight differences in the number of adherent spores (less than 1 log unit) were observed between materials, but a higher number of adherent E. coli cells was found on the hydrophobic materials PEHD and Teflon. Conversely, the resistance of both B. cereus and B. subtilis spores to a cleaning procedure was significantly affected by the material. Hydrophobic materials were harder to clean. The topography parameter derived from the Abbott-Firestone curve, RVK, and, to a lesser extent, the widely used roughness parameters RA (average roughness) and Rz (maximal roughness), were related to the number of adherent cells. Lastly, the soiling level as well as the adhesion strength were shown to depend largely on the microorganism. The number of adhering B. cereus hydrophobic spores and their resistance to a cleaning procedure were found to be 10 times greater than those of the B. subtilis hydrophilic spores. Escherichia coli was loosely bound to all the materials tested, even after 24 h biofilm formation.     

Proteome profile of a pandemic Vibrio parahaemolyticus SC192 strain in the planktonic and biofilm condition

Vibrio parahaemolyticus is one of the leading causative agents of foodborne diseases in humans. In this study, the proteome profiles of the pandemic strain V. parahaemolyticus SC192 belonging to the O3:K6 serovar during the planktonic and biofilm stages were analyzed by two-dimensional liquid chromatography coupled to tandem mass spectrometry. This non-gel-based multidimensional protein identification technology approach identified 45.5% of the proteome in the reference genome V. parahaemolyticus RIMD 2210633. This is the largest proteome coverage obtained so far in V. parahaemolyticus and provides evidence for expression of 27% of the hypothetical proteins. Comparison of the planktonic and biofilm proteomes based on their cluster of orthologous groups, gene ontologies and KEGG pathways provides basic information on biofilm specific functions and pathways. To the authors’ knowledge, this is the first study to generate a global proteome profile of the pandemic strain of V. parahaemolyticus and the method reported here could be used to rapidly obtain a snapshot of the proteome of any microorganism at a given condition.     

Alcaligenes faecalis kw-a biofilm for denitrification of nitrate-rich effluent

Alcaligenes faecalis kw-A selected for possessing good denitrification efficiency was used for biofilm development. The biofilm could be developed on a glass surface within 12 hr when 5%, Ix 10(8) cells/ml was used as inoculum. The microcolonies were seen in 6 hr and glycocalyx in 9 hr stage. At 24 hr the biofilm was developed fully and hence was visualised as dense mass. The biofilm protein content showed 48.5% increase in shake flask than in static condition. The exopoplymer is produced in larger amounts in biofilm as compared to the suspended cells. Also, its amount was more by 43% in the biofilm produced in shake flask condition than in static condition. The biofilm could remove 95% nitrate from nitrate-rich effluent in a bench-scale process in 36 hr. The attached growth technique demonstrated here can be utilised to study the effect of favourable as well as adverse conditions on the denitrification efficiency of a culture. The ultimate application of a denitrifying biofilm would be in attached growth or biofilm reactor.     

Proteomic database of wool components

The separation, classification and identification of wool fibre proteins has been of interest for many years. The purposes of this review are to summarise past work in this area and to evaluate the application of modern proteomic techniques to the identification and characterisation of wool proteins. The current state of knowledge of the wool proteome will also be presented.     

Autoinducer 2 affects biofilm formation by Bacillus cereus

Cell-free supernatants from growing Bacillus cereus strain ATCC 10987 induced luminescence in a Photorhabdus luminescens DeltaluxS mutant, indicating the production of functional autoinducer 2 (AI-2). The exogenous addition of in vitro synthesized AI-2 had an inhibitory effect on biofilm formation by B. cereus and promoted release of the cells from a preformed biofilm.     

Proteomic analysis of larvae during development, attachment, and metamorphosis in the fouling barnacle, Balanus amphitrite

The barnacle, Balanus amphitrite, is one of the primary model organisms for rocky-shore ecology studies and biofouling research. This barnacle species has a complex life cycle during which the swimming nauplius molts six times and transforms into a cyprid stage. Cyprids must attach to a surface to metamorphose into a juvenile barnacle. To clarify the overall profile of protein expression during larval development and metamorphosis, 2-DE was used to compare the proteome of the nauplius, the swimming cyprid, the attached cyprid, and the metamorphosed cyprid. The proteome of the swimming cyprid was distinctly different from that of other life stages and had about 400 spots. The proteomes of the attached and metamorphosed cyprids were similar with respect to major proteins but had significantly lower numbers of spots compared to that of swimming larval stages. Obviously, synthesis of most proteins from swimming cyprids was switched off after attachment and metamorphosis. Our advanced MS analysis (MALDI-TOF/TOF MS/MS) allowed us to identify the proteins that were differentially and abundantly expressed in the swimming cyprid. These proteins included signal transduction proteins (adenylate cyclase and calmodulin) and juvenile hormone binding proteins. In summary, for the first time, we have analyzed the global protein expression pattern of fouling marine invertebrate larvae during metamorphosis. Our study provides new insights into the mechanisms of barnacle larval metamorphosis and also provides a foundation for exploring novel targets for antifouling treatments.     

Non-glucan Attached Proteins of Candida albicans Biofilm Formed on Various Surfaces

Non-glucan attached proteins of the cell surface and extracellular matrix of Candida albicans biofilms formed on two catheter surfaces and denture acrylic were examined. The SDS-PAGE protein profiles of these proteins compared with that obtained from planktonic yeast cells and germ tubes were generally similar. This observation suggested that this class of biofilm surface proteins is not composed of a unique set of extracellular proteins or that one or a few proteins dominate the non-glucan attached proteins of biofilm. However, differences were observed in the proteins obtained from biofilm formed on one catheter surface and two proteins, Grp2p and ORF19.822p, identified by mass spectrometry following two-dimensional separation. These proteins have previously been associated with drug resistance and their presence or abundance appeared to be influenced by the surface on which the biofilm was formed.     

The use of glass wool as an attachment surface for studying phenotypic changes in Pseudomonas aeruginosa biofilms by two-dimensional gel electrophoresis

Two-dimensional polyacrylamide gel electrophoresis was used to demonstrate phenotypic differences between Pseudomonas aeruginosa biofilm cells and the planktonic counterpart cells under defined culture conditions. Glass wool was used as a substratum for cell attachment as it affords a large surface-to-volume ratio (1 g with a mean diameter of 15 microns = 1300 cm2), supports the growth of biofilms, allows for free movement of cells between the inter-strand spaces, and it facilitates the exchange of nutrients and oxygen. It also allows for the separation of the biofilm biomass from the surrounding surface influenced planktonic (SIP) cells for further characterization. Comparative analysis of the respective proteomes indicated striking differences in the protein patterns of planktonic, biofilm and SIP cells. We selected 41 proteins, the levels of which varied in a significant and reproducible way in the respective protein profiles. In the biofilm cells, a general up-regulation of the spots was seen, but in SIP cells expression of these spots were generally down-regulated. Altogether six unique proteins were seen in the planktonic cells, while the biofilm and SIP cells contained five and two unique proteins, respectively. Glass wool, therefore, appears to be an ideal attachment surface for the study of biofilm development.