Synthesis and Study of Copper-Containing Polymers of Microcrystalline Cellulose Sulfates from Larch Wood

For the first time, the synthesis of water-soluble copper-containing microcrystalline cellulose sulfates (Сu-MCS) has been performed by the ion exchange method. The composition of the products has been studied by chemical methods and X-ray spectral microanalysis. The copper content in the Сu-MCS samples was 12.6–14.1%. The absence of sodium in the resulting polymer indicates the complete substitution of the sodium cations by the copper cations in the sodium salt of MCC sulfate. The structure of the copper-containing sulfates of microcrystalline cellulose has been confirmed by X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), and electron paramagnetic resonance (EPR). According to the XRD method, Сu-MCS and Na-MCS have an amorphous structure in contrast to the original MCC samples, which have a high degree of crystallinity. The EPR data have demonstrated the formation of a pseudocrystalline structure of the copper-containing salt system in the Сu-MCS samples. As shown by atomic-force microscopy, the surface of the Сu-MCS films consists of homogeneous crystallites, which have a spherical or slightly extended form with the size of about 70 nm. The film surface is quite homogeneous in its phase composition and contains no impurities.

     

The Raman Spectroscopy,XRD, SEM,and AFM Study of Arabinogalactan Sulfates Obtained Using Sulfamic Acid

The structure of sodium salts of arabinogalactan (AG) sulfates obtained by sulfating AG of larch wood with a sulfamic acid–urea mixture in 1,4-dioxane was studied by the methods of Raman spectroscopy, X-ray diffraction (XRD) phase analysis, scanning electron microscopy (SEM), and atomic force microscopy (AFM). The introduction of sulfate groups into the structure of arabinogalactan was confirmed by the appearance in the Raman spectra of new absorption bands related to the deformation vibrations δ (SO₃) at 420 cm^–1 and δ (О=S=O) at 588 cm^–1, stretching vibrations ν (C–O–S) at 822 cm^–1, symmetrical stretching vibrations ν_s (O=S=O) at 1076 cm^–1, and asymmetric stretching vibrations of ν_as (O=S=O) at 1269 cm^–1. According to the XRD data, the amorphization of arabinogalactan structure occurs during the sulfation process. The SEM method revealed a significant difference in the morphology of the sulfated and starting arabinogalactan. The starting AG consists of particles of predominantly globular shape with a size of 10 to 90 μm; arabinogalactan sulfates, of particles of various shapes with sizes of 1–8 μm. According to the AFM, the surface of sulfated arabinogalactan film consists of rather homogeneous spherical particles about 70 nm in size. The root-mean-square value of the surface roughness is 33 nm. The surface of sulfated AG film does not contain impurities.     

A spectrophotometric method for the determination of zinc, copper, and cobalt ions in metalloproteins using Zincon

Zincon (2-carboxy-2′-hydroxy-5′-sulfoformazylbenzene) has long been known as an excellent colorimetric reagent for the detection of zinc and copper ions in aqueous solution. To extend the chelator’s versatility to the quantification of metal ions in metalloproteins, the spectral properties of Zincon and its complexes with Zn²⁺, Cu²⁺, and Co²⁺ were investigated in the presence of guanidine hydrochloride and urea, two common denaturants used to labilize metal ions in proteins. These studies revealed the detection of metals to be generally more sensitive with urea. In addition, pH profiles recorded for these metals indicated the optimal pH for complex formation and stability to be 9.0. As a consequence, an optimized method that allows the facile determination of Zn²⁺, Cu²⁺, and Co²⁺ with detection limits in the high nanomolar range is presented. Furthermore, a simple two-step procedure for the quantification of both Zn²⁺ and Cu²⁺ within the same sample is described. Using the prototypical Cu²⁺/Zn²⁺-protein superoxide dismutase as an example, the effectiveness of this method of dual metal quantification in metalloproteins is demonstrated. Thus, the spectrophotometric determination of metal ions with Zincon can be exploited as a rapid and inexpensive means of assessing the metal contents of zinc-, copper-, cobalt-, and zinc/copper-containing proteins.     

Building reactive copper centers in human carbonic anhydrase II

Reengineering metalloproteins to generate new biologically relevant metal centers is an effective a way to test our understanding of the structural and mechanistic features that steer chemical transformations in biological systems. Here, we report thermodynamic data characterizing the formation of two type-2 copper sites in carbonic anhydrase and experimental evidence showing one of these new, copper centers has characteristics similar to a variety of well-characterized copper centers in synthetic models and enzymatic systems. Human carbonic anhydrase II is known to bind two Cu²⁺ ions; these binding events were explored using modern isothermal titration calorimetry techniques that have become a proven method to accurately measure metal-binding thermodynamic parameters. The two Cu²⁺-binding events have different affinities (K _a approximately 5 × 10¹² and 1 × 10¹⁰), and both are enthalpically driven processes. Reconstituting these Cu²⁺ sites under a range of conditions has allowed us to assign the Cu²⁺-binding event to the three-histidine, native, metal-binding site. Our initial efforts to characterize these Cu²⁺ sites have yielded data that show distinctive (and noncoupled) EPR signals associated with each copper-binding site and that this reconstituted enzyme can activate hydrogen peroxide to catalyze the oxidation of 2-aminophenol.     

Copper blocks V‐ATPase activity and SNARE complex formation to inhibit yeast vacuole fusion

The accumulation of copper in organisms can lead to altered functions of various pathways and become cytotoxic through the generation of reactive oxygen species. In yeast, cytotoxic metals such as Hg⁺, Cd²⁺ and Cu²⁺ are transported into the lumen of the vacuole through various pumps. Copper ions are initially transported into the cell by the copper transporter Ctr1 at the plasma membrane and sequestered by chaperones and other factors to prevent cellular damage by free cations. Excess copper ions can subsequently be transported into the vacuole lumen by an unknown mechanism. Transport across membranes requires the reduction of Cu²⁺ to Cu⁺. Labile copper ions can interact with membranes to alter fluidity, lateral phase separation and fusion. Here we found that CuCl₂ potently inhibited vacuole fusion by blocking SNARE pairing. This was accompanied by the inhibition of V‐ATPase H⁺ pumping. Deletion of the vacuolar reductase Fre6 had no effect on the inhibition of fusion by copper. This suggests that Cu²⁺ is responsible for the inhibition of vacuole fusion and V‐ATPase function. This notion is supported by the differential effects of chelators. The Cu²⁺‐specific chelator triethylenetetramine rescued fusion, whereas the Cu⁺‐specific chelator bathocuproine disulfonate had no effect on the inhibited fusion.     

Potential use of Cu2+, K+ and Na+ for the destruction of Caulerpa taxifolia: differential effects on photosynthetic parameters

Chemical techniques were investigated in order to eradicate Caulerpa taxifolia, a green alga spreading at a remarkable rate in the Mediterranean Sea. The action of copper, potassium and sodium ions on survival rates and photosynthetic parameters was compared, in order to optimise the conditions of further in situ treatments. The lethal doses were determined and the impact of the studied cations on photosynthesis and respiration rates and PSII photochemistry was analysed from measurements of net oxygen exchanges and chlorophyll fluorescence. The Cu²⁺ concentrations required to obtain 100% mortality were 15 × 10² to 10⁴ times lower than those of K⁺ and Na⁺. Respiration was slightly affected whatever the salt concentration,while photosynthesis could be totally inhibited depending on the applied treatment. Changes in the structure of the Ribulose-1,5-biphosphate carboxylase/oxygenase (RubisCO, EC: 4.1.1.39) were also detected when C. taxifolia under went cation treatments (10 mg L^-1 Cu²⁺, 1h; 20 gL^-1 K⁺, 3 h; 20 g L^-1 Na⁺, 1 h). Given the high concentration and long incubation periods required with K⁺ and Na⁺ ions, these cations are not suitable to be used in situ. Our results make possible the utilisation of copper cations following technical approaches such asion-exchange textile covers, which allows a controlled release of cupric ions without dissemination in the marine environment. This revised version was published online in August 2006 with corrections to the Cover Date.     

Biosorption of copper(II) from aqueous solutions by green alga <Emphasis Type="Italic">Cladophora fascicularis</Emphasis>

Biosorption is an effective means of removal of heavy metals from wastewater. In this work the biosorption behavior of Cladophora fascicularis was investigated as a function of pH, amount of biosorbent, initial Cu²⁺ concentration, temperature, and co-existing ions. Adsorption equilibria were well described by Langmuir isotherm models. The enthalpy change for the biosorption process was found to be 6.86 kJ mol⁻¹ by use of the Langmuir constant b. The biosorption process was found to be rapid in the first 30 min. The presence of co-existing cations such as Na⁺, K⁺, Mg²⁺, and Ca²⁺ and anions such as chloride, nitrate, sulfate, and acetate did not significantly affect uptake of Cu²⁺ whereas EDTA substantially affected adsorption of the metal. When experiments were performed with different desorbents the results indicated that EDTA was an efficient desorbent for the recovery of Cu²⁺ from biomass. IR spectral analysis suggested amido or hydroxy, C=O, and C–O could combine strongly with Cu²⁺.     

Characterisation of cation binding and gelation of polyuronates by circular dichroism

The cation-induced gelation of alginates and pectins with various metal ions has been monitored by circular dichroism (c.d.), using a controlled diffusion technique to prepare homogeneous gels in situ. Spectral changes observed with Ca²⁺ are closely similar to those previously reported for Ca²⁺-induced dimerisation of alginate poly-l-guluronate and pectin poly-d-galacturonate chain-sequences in solution, and the magnitude of the c.d. change on gel formation is directly related to the proportion of these structural types present. It therefore appears that gel formation does not introduce optical artefacts such as have been reported for particulate systems or biological membranes. Similar spectral changes are observed on gelation of pectin with Sr²⁺, Ba²⁺, Cd²⁺, Ni²⁺, or Pb²⁺, but with minor alterations in the wavelength of maximum c.d. change. These subtle differences are interpreted as reflecting variation in binding-site geometry to accommodate ions of different size. Differences in c.d. behaviour with Mg²⁺, Ca²⁺, and Sr²⁺ are far greater for alginate than for pectin, consistent with the greater selectivity of ion-binding. Gelation of both alginate and pectin with Cu²⁺ is accompanied by spectral changes that are opposite in sign to those observed with other divalent cations, and span a much wider range of wavelengths. This suggests a different and less-specific binding mechanism, consistent with the known lack of selectivity of Cu²⁺ for different polyuronates. However, for alginate, there is also evidence of some specific interchain chelation. A minor enhancement of alginate c.d. in the presence of K⁺ ions is attributed to a decrease in charge density of the polymer chain by bound cations, with consequent increase in segment-segment association in solution. The sign and magnitude of this effect confirm the selectivity of polyuronates for divalent cation.     

The type 2 copper of ascorbate oxidase

Ascorbate oxidase, dissolved in Hepes or sodium phosphate buffers, was analyzed by EPR and activity measurements before and after storage at −30°C and 77 K. The specific activity was somewhat higher in the phosphate buffer, about 3500–3700 Dawson units compared to about 3100 units of the enzyme dissolved in Hepes buffer. After storage at −30°C the activity fell to 1400–2000 units in the phosphate buffer but only to 2600–2800 units in the Hepes buffer. Large changes occurred in the EPR spectrum of enzyme dissolved in the phosphate buffer after storing at −30°C suggesting an alteration of the type 2 copper site. These changes were, however, reverted when the samples were thawed and rapidly frozen at 77 K. Copper analysis showed that about 50% of the total copper was EPR detected. The type 2 Cu²⁺ EPR intensity was in most samples close to 25% of the total EPR intensity. This low contribution of type 2 Cu²⁺ could not be changed if the enzyme was completely reduced and reoxidized, treated with Fe(CN)₆³⁻, large excess of NaF, addition of 50% (v/v) ethylene glycol or dialyzed against 0.1 M Mes buffer (pH 5.5). Since the crystal structure shows that there are one each of types 1 and 2 copper in the monomers there must be another species with an EPR signal rather different from these two copper species. This signal is proposed to originate from some trinuclear centers. The EPR simulations show that it is possible to house a broad unresolved signal under the resolved type 1 and 2 signals so that the total integral becomes 50% of the total copper in the molecule.     

The identity of a new copper(II) electron paramagnetic resonance signal in cytochrome c oxidase

In reoxidation experiments with cytochrome c oxidase (EC 1.9.3.1) in the presence of both reducing substrate and molecular oxygen, a new EPR signal from Cu²⁺ has been observed. The new signal corresponds to 0.45 Cu per functional unit. It is concluded that the new EPR signal originates from Cu²⁺_B, the copper which is EPR-nondetectable in the resting enzyme.Optical absorption changes in the 500–700 nm region accompanies the decay of the new Cu²⁺ EPR signal.Based on the results in this investigation a catalytic cycle for cytochrome oxidase is proposed.     

A rhodamine-based "turn-on" fluorescent chemodosimeter for Cu2+ and its application in living cell imaging

A new fluorescent probe 1, N-(Rhodamine-6G)lactam-hydrazinecarbothioamide, was synthesized as a fluorescent and colorimetric chemodosimeter in aqueous solution for Cu²⁺. Following Cu²⁺-promoted ring opening, redox and hydrolysis reactions, comparable amplifications of absorption and fluorescence signals were observed upon addition of Cu²⁺; this suggests that chemodosimeter 1 effectively avoided the fluorescence quenching caused by the paramagnetic nature of Cu²⁺. Importantly, 1 can selectively recognize Cu²⁺ in aqueous media in the presence of other trace metal ions in organisms, abundant cellular cations and the prevalent toxic metal ions in the environment with high sensitivity (detection limit < 3 ppb) and a rapid response time (< 2 min). In addition, the biological imaging study has demonstrated that 1 can detect Cu²⁺ in the living cells.     

Possible mechanisms underlying copper-induced damage in biological membranes leading to cellular toxicity

It is generally accepted that copper toxicity is a consequence of the generation of reactive oxygen species (ROS) by copper ions via Fenton or Haber-Weiss reactions. Copper ions display high affinity for thiol and amino groups occurring in proteins. Thus, specialized proteins containing clusters of these groups transport and store copper ions, hampering their potential toxicity. This mechanism, however, may be overwhelmed under copper overloading conditions, in which copper ions may bind to thiol groups occurring in proteins non-related to copper metabolism. In this study, we propose that indiscriminate copper binding may lead to damaging consequences to protein structure, modifying their biological functions. Therefore, we treated liver subcellular membrane fractions, including microsomes, with Cu²⁺ ions either alone or in the presence of ascorbate (Cu²⁺/ascorbate); we then assayed both copper-binding to membranes, and microsomal cytochrome P450 oxidative system and GSH-transferase activities. All assayed sub-cellular membrane fractions treated with Cu²⁺ alone displayed Cu²⁺-binding, which was significantly increased in the presence of Zn²⁺, Hg²⁺, Cd²⁺, Ag⁺¹ and As³⁺. Treatment of microsomes with Cu²⁺ in the μM range decreased the microsomal thiol content; in the presence of ascorbate, Cu²⁺ added in the nM concentrations range induced a significant microsomal lipoperoxidation; noteworthy, increasing Cu²⁺ concentration to ≥50 μM led to non-detectable lipoperoxidation levels. On the other hand, μM Cu²⁺ led to the inhibition of the enzymatic activities tested to the same extent in either presence or absence of ascorbate. We discuss the possible significance of indiscriminate copper binding to thiol proteins as a possible mechanism underlying copper-induced toxicity.     

Binding of water to "types I and II" Cu2+ in proteins

Water proton spin-lattice relaxation times have been measured at 30MHz between 280 – 333 K in aqueous solutions of proteins containing Type I Cu²⁺ ions (azurin and umecyanin) and Type II Cu²⁺ ions (benzylamine oxidase and superoxide dismutase). These measurements show that Type II Cu²⁺ is accessible to exchangeable water molecules but Type I is not. This behaviour is consistent with the EPR and optical properties of these ions and their likely biochemical functions.     

Fixed-bed biosorption of Cu2+ by polyacrylonitrile-immobilized dead cells of Saccharomyces cerevisiae

Dead cells of Saccharomyces cerevisiae 54 were immobilized by entrappment in polyacrylonitrile. The beads obtained were used to adsorb copper in an up-flow fixed-bed column. The effect of polymer content and cell loading were studied to optimize the porosity and the efficiency in copper removal of the biosorbent beads in a batch system. The optimal concentration of the polyacrylonitrile was assumed to be 12%(w/v) and a concentration of 0.5 g cell dry weight in 1 g polymer was most effective in adsorption of Cu²⁺. The adsorption capacity of this biosorbent was 27 mg Cu²⁺/g dry biomass at 200 mg/l initial concentration of copper ions. Adsorption of Cu²⁺ in a batch system was studied using different initial concentrations of the solute. The optimal conditions in the up-flow column of the following parameters were determined: flow rate, bed height, and initial concentration of Cu²⁺ of the solutions. Results of fixed-bed biosorption showed that breakthrough and saturation time appeared to increase with the bed height, but decrease with the flow rate and the initial concentration. The linearized form of the Thomas equation was used to describe dynamic adsorption of metal ions. As a result, the adsorption capacity of the batch system and the column system was compared. Desorption of copper ions was achieved by washing the column biomass with 0.1 M HCl at an eluent flow rate of 1 ml/min. The reusability of the immobilized biomass was tested in five consecutive adsorption-desorption cycles. The regenerated beads retained over 45% of their original adsorption capacity after five A/D cycles. This revised version was published online in August 2006 with corrections to the Cover Date.     

Dinuclear Ni(II) and Cu(II) complexes with indolecarboxamide ligand: Synthesis, structure and properties

A potential tetradentate indolecarboxamide ligand, H₄L³ is synthesized and investigated for its coordination abilities towards Ni(II) and Cu(II) ions. Two H₄L³ ligands in their tetra-deprotonated form [L³]⁴⁻, were found to coordinate two metal centers resulting in the formation of [Ni₂(L³)₂]⁴⁻ (5) and [Cu₂(L³)₂]⁴⁻ (6) complexes. The crystal structure of 6 displays the formation of a dinuclear structure where two fully deprotonated ligands, [L³]⁴⁻ hold two copper(II) ions together. Even more interesting is the fact that both deprotonated ligands, [L³]⁴⁻ coordinate the copper ions in an identical and symmetrical fashion. The Na⁺ cations present in the complex 6 stitch together the dinuclear units resulting in the formation of a coordination chain polymer. Four sodium ions connect two dinuclear units via interacting with the O_amide groups. Further, Na⁺ cations were found to coordinate several DMF molecules; some of them are terminal and a few are bridging in nature. The solution state structure (determined by the NMR spectral analysis) of the diamagnetic complex 5 also supported the fact that two deprotonated ligands, coordinate two nickel ions in an identical and symmetrical fashion. Absorption spectral studies reveal that the solid-state square-planar geometry is retained in solution and both complexes do not show any tendency to coordinate potential axial ligands. The variable-temperature magnetic measurements and EPR spectra indicate spin-spin exchange between two copper centers in complex 6. The electrochemical results for both complexes show three irreversible oxidative responses that correspond to the oxidation of first and second metal ion followed by the ligand oxidation, respectively.     

Effects of divalent cations on bovine testicular hyaluronidase catalyzed transglycosylation of chondroitin sulfates

Glycosaminoglycans were prepared as salts of different divalent cations and tested as donors in bovine testicular hyaluronidase catalyzed transglycosylation reactions. All of the metal cations examined had similar binding efficiency of divalent cations to hyaluronan. However, cations bound with different efficiencies to chondroitin sulfate species and the differences were marked in the case of chondroitin 6-sulfate; the numbers of cations bound per disaccharide unit were estimated to be 0.075 for Mn, 1.231 for Ba, 0.144 for Zn, and 0.395 for Cu. While barium salt of chondroitin sulfates enhanced transglycosylation, the zinc salt of chondroitin sulfates inhibited transglycosylation. Therefore, by selecting the proper divalent cation salt of chondroitin sulfates as a donor in the transglycosylation reaction it is possible to improve the yields of the products.     

The influence of radiotherapy on ceruloplasmin and transferrin in whole blood of breast cancer patients

Ceruloplasmin and transferrin are proteins which play a potential role in the process of breast cancer development. These molecules contain Cu²⁺ (ceruloplasmin) or Fe³⁺ ions (transferrin) and thus constitute paramagnetic centers, which can be studied using electron paramagnetic resonance method. The aim of the study was to determine how paramagnetic centers in whole blood of breast cancer patients change under the influence of radiation therapy. Samples of whole blood were taken from 17 women with breast cancer treated with radiotherapy. The measurements were carried out at 170 K using X-band electron paramagnetic resonance (EPR) spectrometer Bruker EMX-10. Two distinct EPR lines, derived from high-spin Fe³⁺ in transferrin and Cu²⁺ from ceruloplasmin, were revealed in all frozen samples. The amplitude and integrated intensity of the EPR signal from Cu²⁺ in ceruloplasmin significantly decreased in all patients after the delivery of the radiation fraction. When comparing the integral intensity of the signal from Fe³⁺ in transferrin, three different situations were identified which are patient specific: a significant increase, an insignificant change, or a significant decrease after the irradiation. A decreased level of Cu²⁺ from ceruloplasmin in patients after radiotherapy means a low level of ceruloplasmin in the plasma or an increased content of reduced Cu⁺ ions. Differences in the integrated intensity of the EPR signal from transferrin translate directly into the amount of bound iron. The observed changes could indicate how well the organism fights against cancer and how easily it adapts to the situation of biochemical stress.     

SDS-capped 1-pyrenecarboxaldehyde nanoprobe for selective detection of Cu2+ ion from water samples: Spectroscopic approach

Sodium dodecyl sulfate (SDS)-capped 1-pyrenecarboxaldehyde nanoparticles (PyalNPs) were prepared using a reprecipitation method in an aqueous medium and exhibited red-shifted aggregation-induced enhanced emission (AIEE). The dynamic light scattering (DLS) examination showed narrower particle size distribution with an average particle size of 41 nm, whereas −34.5 mV zeta potential value indicate the negative surface charge and good stability of nanoparticles (NPs) in an aqueous medium. The AIEE was seen at λ_max = 473 nm in a fluorescence spectrum of a PyalNP suspension. In the presence of Cu²⁺ ions, the fluorescence of PyalNPs quenches very significantly, even in the presence of other metal ions like Ba²⁺, Ca²⁺, Cd²⁺, Co²⁺, Al³⁺, Fe²⁺, Hg²⁺, Ni²⁺ and Mg²⁺. The changes in the fluorescence lifetime of PyalNPs in the presence of Cu²⁺ ions suggested that the type of quenching was dynamic. The fluorescence quenching data for the NPs suspension fitted well into a typical Stern–Volmer relationship in the concentration range 1.0–25 μg/ml of Cu²⁺ ions. The estimated value of the correlation coefficient R² = 0.9877 was close to 1 and showed the linear relationship between quenching data and Cu²⁺ ion concentration. The limit of detection (LOD) was found to be 0.94 ng/ml and is far below the tolerable intake limit value of 1.3 μg/ml accepted by the World Health Organization for Cu²⁺ ions in drinking water. The fluorescence quenching approach for a SDS-capped Pyal nanosuspension for copper ion quantification is of high specificity and coexisting ions were found to interfere very negligibly. The developed method was successfully applied for the estimation of copper ions in river water samples.     

Copper Reduction and Contact Killing of Bacteria by Iron Surfaces

The well-established killing of bacteria by copper surfaces, also called contact killing, is currently believed to be a combined effect of bacterial contact with the copper surface and the dissolution of copper, resulting in lethal bacterial damage. Iron can similarly be released in ionic form from iron surfaces and would thus be expected to also exhibit contact killing, although essentially no contact killing is observed by iron surfaces. However, we show here that the exposure of bacteria to iron surfaces in the presence of copper ions results in efficient contact killing. The process involves reduction of Cu²⁺ to Cu⁺ by iron; Cu⁺ has been shown to be considerably more toxic to cells than Cu²⁺. The specific Cu⁺ chelator, bicinchoninic acid, suppresses contact killing by chelating the Cu⁺ ions. These findings underline the importance of Cu⁺ ions in the contact killing process and infer that iron-based alloys containing copper could provide novel antimicrobial materials.     

Interaction of Aplysia brasiliana Myoglobin with Mn2+ and Cu2+ ions

Myoglobin of Aplysia brasiliana (MbApB) has been recently purified and characterized and it was shown that the amino acid content is quite different from other myoglobins. A large number of aromatic residues was observed together with the existence of a unique histidine at the proximal heme position. Because of the numerous differences in the amino acid sequence between MbApB and whale myoglobin, it was interesting to investigate the interaction of metal ions like Cu²⁺ and Mn²⁺ with MbApB. In the present work Cu²⁺ complexes with Met-MbApB were studied and show a pH transition between different forms of coordination as revealed by EPR measurements. At high pH the EPR spectrum shows the coordination of the metal to at least four nitrogens from ϵ-NH₃ lysine residues. At lower pH in the range 6.0–9.0 the copper binding site shows a pK change of some of the residues involved in metal coordination. Addition of one equivalent Cu²⁺ per protein does not alter the iron EPR signal. The manganese ion has one binding site in MbApB and a binding constant K_a = ( 11.5 ± 0.8) 10³M⁻¹. The binding of Cu²⁺ to MbApB is stronger than Mn²⁺, K_a^Cu2+ >K_a^Mn2+.