Effects of alkaline hydrogen peroxide treatment on in vitro degradation of cellulosic substrates by mixed ruminal microorganisms and Bacteroides succinogenes S85.

The effects of sodium hydroxide (NaOH) and alkaline hydrogen peroxide (AHP) treatments on wheat straw (WS) and various cellulosic substrates were determined by measuring susceptibility to degradation by mixed ruminal organisms or Bacteroides succinogenes S85. In vitro incubations were used to measure differences in fermentation resulting from each successive step in the AHP treatment process. In vitro incubations through 48 or 108 h were conducted to measure these differences. The AHP treatment of WS increased (P less than 0.05) dry matter, neutral detergent fiber, and acid detergent fiber degradation over control WS when these substrates were incubated with mixed ruminal microorganisms or B. succinogenes S85. Fermentations containing AHP-treated WS had greater (P less than 0.05) microbial purine (RNA) and volatile fatty acid concentrations by 12 h compared with those containing untreated or NaOH-treated WS. Xylose in AHP-treated WS was utilized more extensively (P less than 0.05) by 12 h compared with the xylose of untreated or NaOH-treated WS. Treatment with AHP removed 23% of the alkali-labile phenolic compounds from WS. When substrates with high levels of crystalline cellulose (raw cotton fiber, Solka floc, and Sigmacell-50) were treated with NaOH or AHP and incubated for 108 h with B. succinogenes S85, extent of acid detergent fiber degradation of cotton fiber and Sigmacell-50 was similar to that of their respective controls. Sodium hydroxide and AHP treatments were effective in increasing acid detergent fiber degradation of the Solka floc which contained, on average, 3.3 and 4.8 percentage units more acid detergent lignin and hemicellulose, respectively, than cotton fiber and Sigmacell-50.(ABSTRACT TRUNCATED AT 250 WORDS)     

Effects of alkaline hydrogen peroxide treatment on in vitro degradation of cellulosic substrates by mixed ruminal microorganisms and Bacteroides succinogenes S85

The effects of sodium hydroxide (NaOH) and alkaline hydrogen peroxide (AHP) treatments on wheat straw (WS) and various cellulosic substrates were determined by measuring susceptibility to degradation by mixed ruminal organisms or Bacteroides succinogenes S85. In vitro incubations were used to measure differences in fermentation resulting from each successive step in the AHP treatment process. In vitro incubations through 48 or 108 h were conducted to measure these differences. The AHP treatment of WS increased (P less than 0.05) dry matter, neutral detergent fiber, and acid detergent fiber degradation over control WS when these substrates were incubated with mixed ruminal microorganisms or B. succinogenes S85. Fermentations containing AHP-treated WS had greater (P less than 0.05) microbial purine (RNA) and volatile fatty acid concentrations by 12 h compared with those containing untreated or NaOH-treated WS. Xylose in AHP-treated WS was utilized more extensively (P less than 0.05) by 12 h compared with the xylose of untreated or NaOH-treated WS. Treatment with AHP removed 23% of the alkali-labile phenolic compounds from WS. When substrates with high levels of crystalline cellulose (raw cotton fiber, Solka floc, and Sigmacell-50) were treated with NaOH or AHP and incubated for 108 h with B. succinogenes S85, extent of acid detergent fiber degradation of cotton fiber and Sigmacell-50 was similar to that of their respective controls. Sodium hydroxide and AHP treatments were effective in increasing acid detergent fiber degradation of the Solka floc which contained, on average, 3.3 and 4.8 percentage units more acid detergent lignin and hemicellulose, respectively, than cotton fiber and Sigmacell-50.(ABSTRACT TRUNCATED AT 250 WORDS)     

Enhancing anaerobic biogasification of corn stover through wet state NaOH pretreatment

A new method of wet state (WS) sodium hydroxide (NaOH) was advanced to pretreat corn stover for enhancing biogas production. The results showed that 88% moisture content, 3-day treatment time and ambient temperature (20 °C) was appropriate for WS NaOH pretreatment. The NaOH dose of 2% and the loading rate of 65 g/L were found to be optimal in terms of 72.9% more total biogas production, 73.4% more methane yield, and 34.6% shorter technical digestion time, as compared to the untreated one. WS pretreatment used 86% shorter treatment time and 66.7% less NaOH dose than solid state one. The analyses of chemical compositions and chemical structures showed that 9.3–19.1% reduction of the contents of total Lignin, cellulose, and hemicellulose (LCH), and 27.1–77.1% increase of hot-water extractives contributed to the enhancement of biogas production. WS NaOH pretreatment could be one of cost-effective methods for high efficient biological conversion of corn stover into bioenergy.     

Evaluation of chemical pretreatment for enzymatic solubilization of rice straw

Summary Rice straw was treated with NaOH, peracetic acid (PA), and sodium chlorite (NaClO₂). Quantitative changes in the composition of the treated straw, crystallinity of the treated straw and extracted cellulose, and susceptibility of the treated straw to Trichoderma reesei cellulase were studied. The alkali treatment resulted in a remarkable decrease in hemicellulose as well as lignin. Consequently, the recovery of residual straw after NaOH treatment was lowest among the three chemical reagents evaluated. The treatment with PA or NaCIO₂ resulted in a slight loss in hemicellulose and cellulose in the straw. The three chemical treatments caused little or no breakdown of the crystalline structure of cellulose in the straw. The treated straw was solubilized with the culture filtrate of T. reesei. The degree of enzymatic solubilization relative to the amount of residual straw was 69% after treatment with 0.25 N NaOH, 42% after treatment with 20% PA, and 50% after treatments with NaClO₂ (twice). The degree of enzymatic solubilization relative to the amount of the untreated straw, however, was 30% after treatment with 0.25 N NaOH, 32% after treatment with 20% PA, and 37% after treatments with NaClO₂ (twice).     

A comparison of chemical pretreatment methods for improving saccharification of cotton stalks

The effectiveness of sulfuric acid (H(2)SO(4)), sodium hydroxide (NaOH), hydrogen peroxide (H(2)O(2)), and ozone pretreatments for conversion of cotton stalks to ethanol was investigated. Ground cotton stalks at a solid loading of 10% (w/v) were pretreated with H(2)SO(4), NaOH, and H(2)O(2) at concentrations of 0.5%, 1%, and 2% (w/v). Treatment temperatures of 90 degrees C and 121 degrees C at 15 psi were investigated for residence times of 30, 60, and 90 min. Ozone pretreatment was performed at 4 degrees C with constant sparging of stalks in water. Solids from H(2)SO(4), NaOH, and H(2)O(2) pretreatments (at 2%, 60 min, 121 degrees C/15 psi) showed significant lignin degradation and/or high sugar availability and hence were hydrolyzed by Celluclast 1.5L and Novozym 188 at 50 degrees C. Sulfuric acid pretreatment resulted in the highest xylan reduction (95.23% for 2% acid, 90 min, 121 degrees C/15 psi) but the lowest cellulose to glucose conversion during hydrolysis (23.85%). Sodium hydroxide pretreatment resulted in the highest level of delignification (65.63% for 2% NaOH, 90 min, 121 degrees C/15 psi) and cellulose conversion (60.8%). Hydrogen peroxide pretreatment resulted in significantly lower (p相似文献   

Mild alkaline/oxidative pretreatment of wheat straw

A new mild alkaline/oxidative pretreatment of wheat straw prior to enzymic hydrolysis was carried out. It consists of a first alkaline (1% NaOH for 24 h) step, which mainly solubilises hemicellullose and renders the material more accessible to further chemical attack, and a second alkaline/oxidative step (1% NaOH and 0·3% H₂O₂ for 24 h), which solubilises and oxidises lignin to minor polluting compounds. The entire process was carried out at low temperature (25–40°C) using a low concentration of chemicals, resulting in a relatively low cost and waste liquors containing only trace amounts of dangerous pollutants derived from lignin. Recovery of cellulose after the double pretreatment reached 90% of that contained in the starting material, with a concomitant 81% degradation of lignin. The action of a commercial cellulase on the cellulose obtained produced a syrup with a high concentration of reducing sugars (220 mg/ml), of which a large percentage was glucose.     

Pretreatment of lignocellulosic material with fungi capable of higher lignin degradation and lower carbohydrate degradation improves substrate acid hydrolysis and the eventual conversion to ethanol

Phanerochaete chrysosporium, Pycnoporus cinnabarinus,and fungal isolates RCK-1 and RCK-3 were tested for their lignin degradation abilities when grown on wheat straw (WS) and Prosopis juliflora (PJ) under solid-state cultivation conditions. Fungal isolate RCK-1 degraded more lignin in WS (12.26% and 22.64%) and PJ (19.30% and 21.97%) and less holocellulose in WS (6.27% and 9.39%) and PJ (3.01% and 4.58%) after 10 and 20 days, respectively, than other fungi tested. Phanerochaete chrysosporium caused higher substrate mass loss and degraded more of holocellulosic content (WS: 55.67%; PJ: 48.89%) than lignin (WS: 18.89%; PJ: 20.20%) after 20 days. The fungal pretreatment of WS and PJ with a high-lignin-degrading and low-holocellulose-degrading fungus (fungal isolate RCK-1) for 10 days resulted in (i) reduction in acid load for hydrolysis of structural polysaccharides (from 3.5% to 2.5% in WS and from 4.5% to 2.5% in PJ), (ii) an increase in the release of fermentable sugars (from 30.27 to 40.82 g L(-1) in WS and from 18.18 to 26.00 g L(-1) in PJ), and (iii) a reduction in fermentation inhibitors (total phenolics) in acid hydrolysate of WS (from 1.31 to 0.63 g L(-1)) and PJ (from 2.05 to 0.80 g L(-1)). Ethanol yield and volumetric productivity from RCK-1-treated WS (0.48 g g(-1) and 0.54 g L(-1) h(-1), respectively) and PJ (0.46 g g(-1) and 0.33 g L(-1) h(-1), respectively) were higher than untreated WS (0.36 g g(-1) and 0.30 g L(-1) h(-1), respectively) and untreated PJ (0.42 g g(-1) and 0.21 g L(-1) h(-1), respectively).     

Enhanced enzymatic hydrolysis of spruce by alkaline pretreatment at low temperature

Alkaline pretreatment of spruce at low temperature in both presence and absence of urea was studied. It was found that the enzymatic hydrolysis rate and efficiency can be significantly improved by the pretreatment. At low temperature, the pretreatment chemicals, either NaOH alone or NaOH-urea mixture solution, can slightly remove lignin, hemicelluloses, and cellulose in the lignocellulosic materials, disrupt the connections between hemicelluloses, cellulose, and lignin, and alter the structure of treated biomass to make cellulose more accessible to hydrolysis enzymes. Moreover, the wood fiber bundles could be broken down to small and loose lignocellulosic particles by the chemical treatment. Therefore, the enzymatic hydrolysis efficiency of untreated mechanical fibers can also be remarkably enhanced by NaOH or NaOH/urea solution treatment. The results indicated that, for spruce, up to 70% glucose yield could be obtained for the cold temperature pretreatment (-15 degrees C) using 7% NaOH/12% urea solution, but only 20% and 24% glucose yields were obtained at temperatures of 23 degrees C and 60 degrees C, respectively, when other conditions remained the same. The best condition for the chemical pretreatment regarding this study was 3% NaOH/12% urea, and -15 degrees C. Over 60% glucose conversion was achieved upon this condition.     

Hemicelluloses negatively affect lignocellulose crystallinity for high biomass digestibility under NaOH and H2SO4 pretreatments in Miscanthus

ABSTRACT: BACKGROUND: Lignocellulose is the most abundant biomass on earth. However, biomass recalcitrance has become a major factor affecting biofuel production. Although cellulose crystallinity significantly influences biomass saccharification, little is known about the impact of three major wall polymers on cellulose crystallization. In this study, we selected six typical pairs of Miscanthus samples that presented different cell wall compositions, and then compared their cellulose crystallinity and biomass digestibility after various chemical pretreatments. RESULTS: A Miscanthus sample with a high hemicelluloses level was determined to have a relatively low cellulose crystallinity index (CrI) and enhanced biomass digestibility at similar rates after pretreatments of NaOH and H2SO4 with three concentrations. By contrast, a Miscanthus sample with a high cellulose or lignin level showed increased CrI and low biomass saccharification, particularly after H2SO4 pretreatment. Correlation analysis revealed that the cellulose CrI negatively affected biomass digestion. Increased hemicelluloses level by 25% or decreased cellulose and lignin contents by 31% and 37% were also found to result in increased hexose yields by 1.3-times to 2.2-times released from enzymatic hydrolysis after NaOH or H2SO4 pretreatments. The findings indicated that hemicelluloses were the dominant and positive factor, whereas cellulose and lignin had synergistic and negative effects on biomass digestibility. CONCLUSIONS: Using six pairs of Miscanthus samples with different cell wall compositions, hemicelluloses were revealed to be the dominant factor that positively determined biomass digestibility after pretreatments with NaOH or H2SO4 by negatively affecting cellulose crystallinity. The results suggested potential approaches to the genetic modifications of bioenergy crops.     

Bioconversion of wheat straw to ethanol: Chemical modification,enzymatic hydrolysis,and fermentation

Native wheat straw (WS) was pretreated with various concentrations of H₂SO₄ and NaOH followed by secondary treatments with ethylene diamine (EDA) and NH₄OH prior to enzymatic saccharification. Conversion of the cellulosic component to sugar varied with the chemical modification steps. Treatment solely with alkali yield 51–75% conversion, depending on temperature. Acid treatment at elevated tempeatures showed a substantial decrease in the hemicellulose component, whereas EDA-treated WS (acid pretreated) showed a 69–75% decrease in the lignin component. Acid-pretreated EDA-treated straw yielded a 98% conversion rate, followed by 83% for alkali–NH₄OH treated straws. In other experiments, WS was pretreated with varying concentration of H₂SO₄ or NaOh followed by NH₄OH treatment prior to enzymatic hydrolysis. Pretreatment of straw with 2% NaOH for 4 h coupled to enzymatic hydrolysis yield a 76% conversion of the cellulosic component. Acid–base combination pretreatment yielded only 43% conversions. A reactor column was subsequently used to measure modification–saccharification–fermentation for wheat straw conversion on a larger scale. Thirty percent conversions of wheat straw cellulosics to sugar were observed with subsequent fermentation to alcohol. The crude cellulase preparation yielded considerable quantities of xylose in addition to the glucose. Saccharified materials were fermented directly with actively proliferating proliferating yeast cells without concentration of the sugars.     

Alkali process for enhancing susceptibility of autohydrolysed beech sawdust to enzymatic hydrolysis

Autohydrolysed beech sawdust has been treated with aqueous NaOH solution in a three-stage process to increase the susceptibility of cellulose to cellulolytic enzymes. This process consisted of neutralization of autohydrolysed wood, extraction of lignin and alkali treatment of residual solids with 1.5% aqueous NaOH solution at 135°C for 1 h. The cellulose in the residues was then hydrolysed with Novo (SP 122) and Fusarium sp. 27 cellulases [see 1,4-(1,3;1,4)-β-d-glucan 4-glucanohydrolase, EC 3.2.1.4]. The susceptibility of cellulose to cellulases was increased 2.3 to 2.7-fold.     

Tassel Removal Positively Affects Biomass Production Coupled with Significantly Increasing Stem Digestibility in Switchgrass

In this study, tassels of Cave-in-Rock (upland) and Alamo (lowland) were removed at or near tassel emergence to explore its effects on biomass production and quality. Tassel-removed (TR) Cave-in-Rock and Alamo both exhibited a significant (P<0.05) increase in plant heights (not including tassel length), tiller number, and aboveground biomass dry weight (10% and 12%, 30% and 13%, 13% and 18%, respectively by variety) compared to a control (CK) treatment. Notably, total sugar yields of TR Cave-in-Rock and Alamo stems increased significantly (P<0.05 or 0.01) by 19% and 19%, 21% and 14%, 52% and 18%, respectively by variety, compared to those of control switchgrass under 3 treatments by direct enzymatic hydrolysis (DEH), enzymatic hydrolysis after 1% NaOH pretreatment (EHAL) and enzymatic hydrolysis after 1% H₂SO₄ pretreatment (EHAC). These differences were mainly due to significantly (P<0.05 or 0.01) higher cellulose content, lower cellulose crystallinity indexes (CrI) caused by higher arabinose (Ara) substitution in xylans, and lower S/G ratio in lignin. However, the increases of nitrogen (N) and sulphur (S) concentration negatively affects the combustion quality of switchgrass aboveground biomass. This work provides information for increasing biomass production and quality in switchgrass and also facilitates the inhibition of gene dispersal of switchgrass in China.     

Fractionation and characterization of polysaccharides from abaca fibre

Abaca fibre polysaccharides were fractionated into water soluble, pectic, 1% NaOH soluble, hemicellulosic and cellulose fractions by extraction with hot water, dilute hydrochloric acid (pH 1.6), aqueous 1% NaOH and 17.5% NaOH, respectively. Cellulose (60.4–63.6%) and hemicelluloses (20.8%) were the major polysaccharides in abaca fibres. The hot water soluble polysaccharides contained noticeable amounts of pectic substances and a large proportion of neutral polysaccharides. The pectic polysaccharide preparation was enriched in both galacturonic acid and neutral sugars, including xylose, glucose, galactose, arabinose, and rhamnose. Extraction of the fibre with aqueous 1% NaOH produced the hemicellulose–lignin complex, which was enriched in xylose and, to a lesser extent, glucose-, arabinose- and galactose-containing polysaccharides, together with 7.6% associated lignin. Further extraction of the delignified fibre residue with aqueous 17.5%. NaOH removed the hemicellulose fractions, which were strongly enriched in xylose-containing polysaccharides. Besides ferulic and p-coumaric acids, six other phenolic monomers were also detected in the mixtures of alkaline nitrobenzene oxidation of associated lignin in all the polysaccharide fractions. The content of bound lignin in water soluble, pectic, and 1% NaOH soluble polysaccharides (Fractions 1, 2, and 3), isolated directly from the lignified fibres, was 12 times that of the hemicellulosic preparations (Fractions 4 and 5) isolated from the delignified fibre residues.     

Mild alkaline pretreatment can achieve high hydrolytic and fermentation efficiencies for rice straw conversion to bioethanol

Abstract

Mild alkaline pretreatment was evaluated as a strategy for effective lignin removal and hydrolysis of rice straw. The pretreatment efficiency of different NaOH concentrations (0.5, 1.0, 1.5 or 2.0% w/w) was assessed. Rice straw (RS) pretreated with 1.5% NaOH achieved better sugar yield compared to other concentrations used. A cellulose conversion efficiency of 91% (45.84?mg/ml glucose release) was attained from 1.5% NaOH pretreated rice straw (PRS), whereas 1% NaOH pretreated rice straw yielded 35.10?mg/ml of glucose corresponding to a cellulose conversion efficiency of 73.81%. The ethanol production from 1% and 1.5% NaOH pretreated RS hydrolysates was similar at ～3.3% (w/v), corresponding to a fermentation efficiency of 86%. The non-detoxified hydrolysate was fermented using the novel yeast strain Saccharomyces cerevisiae RPP-03O without any additional supplementation of nutrients.     

大贵寺国家森林公园野生青檀檀皮纤维成分分析

分析了湖北大贵寺国家森林公园野生青檀种群64份2～3年生青檀枝条檀皮的纤维成分.结果表明,该野生青檀枝条檀皮纤维的水分、灰分、冷水抽出物、热水抽出物等指标的平均值分别为8.267％、6.273％、24.025％、26.594％;1％NaOH抽出物、苯-醇抽出物、综纤维素、酸不溶木素等指标的平均值分别为60.904％、11.011％、56.759％、9.698％;纤维素吸光值为0.373.酸不溶木素、灰分、纤维素吸光值以及1％ NaOH抽出物4个指标呈现近正态分布,其它指标的分布偏斜度较大;水分与1％ NaOH抽出物、灰分与酸不溶木素、综纤维素与酸不溶木素之间具有显著的相关性(p＜0.05);水分与灰分、水分与热水抽出物、水分与综纤维素、苯-醇抽出物与综纤维素、苯-醇抽出物与酸不溶木素之间具有极显著的相关性(p＜0.01).平均连锁值取5.627时,可以把64个样品分为23类,说明大贵寺国家森林公园野生青檀群体檀皮纤维成分存在着较高的表型多样性,具有广阔的遗传改良前景.     

Multiple response optimization of alkaline pretreatment of sisal fiber (Agave sisalana) assisted by ultrasound

A procedure for the alkaline pretreatment of sisal fiber assisted by ultrasound was optimized to obtain a higher solubilization of hemicellulose and the removal of lignin with cellulose fraction maintenance. A full factorial design 2³ was used for the evaluation of the effects of the variables (sonication time, NaOH concentration, and sonication amplitude) on the pretreatment. The optimal values for the variables using the Doehlert matrix for the sonication time, NaOH concentration, and sonication amplitude were 27 min, 4.1% (m/v), and 50%, respectively. The X-ray diffractometry and scanning electron microscopy analyses, after pretreatment, showed changes in chemical structure and morphology due to the removal of 82% of hemicellulose and 86% of lignin from sisal fiber. The soft reaction conditions and relatively short times demonstrated the effectiveness of the combined action of ultrasound with alkaline pretreatment to improve the accessibility to cellulose in this important step of the ethanol production process from biomass.     

Comparative study on the mycelial growth and yield of Ganoderma lucidum (Curt.: Fr.) Karst. on different lignocellulosic wastes

The aim of this study was to examine the possibility of using wheat straw (WS), cottonseed meal (CSM), sunflower meal (SFM), soybean straw (SBS) and bean straw (BS) as basal substrates in Ganoderma lucidum cultivation instead of oak (OS) and poplar (PS) sawdusts. In the study, effects of different growing substrates on spawn running period, yield and biological efficiency (BE) of G. lucidum were determined. Moreover, possible correlations among productivity and lignocellulosic content of substrates were assessed. Average spawn run period varied between 14.2 and 18.2 d. Total yields of G. lucidum grown on different substrates ranged from 28.6 g/kg to 86.1 g/kg, while the corresponding values for BE varied between 8.9%–24.7%. The highest yield and BE was exhibited by the OS followed by PS substrate. CSM gave the lowest yield and BE. Spawn running time was found to be positively correlated to nitrogen content of the substrates (r² = 0.918) and negatively correlated to cellulose and hemicellulose content of substrate (r² = −0.927 and r² = −0.838, respectively). The total mushroom yield was correlated negatively to nitrogen content of the substrates (r² = −0.850) and positively correlated to C:N ratio (r²=0.915). Moreover, there is a strong positive correlation between mushroom yield and cellulose and lignin content of the substrates (r² = 0.794 and r²= 0.879). According to results, G. lucidum had a preference for substrates containing a high amount of cellulose and and lignin, and having a low amount of N and high cellulose:lignin ratio. Furthermore, SBS, WS and BS may be suggested as alternative basal substrates for cultivation of G. lucidum.     

Partial flow of compressed-hot water through corn stover to enhance hemicellulose sugar recovery and enzymatic digestibility of cellulose

Flowthrough pretreatment with compressed-hot water can significantly increase the removal of xylan and lignin and enhance xylose sugar yields and cellulose digestibility, especially at high flow rates. However, continuous flowthrough operations that realize these benefits suffer from a large amount of water consumption that leads to high energy requirements for pretreatment and downstream processing. Because high flow rates are particularly effective early in hemicellulose hydrolysis and less effective later, flow with compressed-hot water was applied at selected intervals, and performance was compared with that of batch and flowthrough operations for corn stover pretreated with compressed-hot water at 200 degrees C. Partial flow reduced water consumption by 60% compared with continuous flowthrough operation but still achieved higher xylose sugar yields (84-89%) compared to batch pretreatment (46.6%). In addition, corn stover cellulose pretreated by partial flow had higher enzymatic digestibility (88-90%) than batch operations (approximately 85%) at otherwise identical conditions, apparently due to much higher lignin removal for the former (40-45% vs 10-12%). Partial flow also reduced degradation, with recovery of xylose and glucose in the solids and hydrolyzate increased to 90-92% vs only about 76% for batch operation. The partial flow approach could be further improved by optimizing the operating strategy and reaction conditions, suggesting that this novel pretreatment could lead to advanced biomass pretreatment technology.     

Biomass Enzymatic Saccharification Is Determined by the Non-KOH-Extractable Wall Polymer Features That Predominately Affect Cellulose Crystallinity in Corn

Corn is a major food crop with enormous biomass residues for biofuel production. Due to cell wall recalcitrance, it becomes essential to identify the key factors of lignocellulose on biomass saccharification. In this study, we examined total 40 corn accessions that displayed a diverse cell wall composition. Correlation analysis showed that cellulose and lignin levels negatively affected biomass digestibility after NaOH pretreatments at p<0.05 & 0.01, but hemicelluloses did not show any significant impact on hexoses yields. Comparative analysis of five standard pairs of corn samples indicated that cellulose and lignin should not be the major factors on biomass saccharification after pretreatments with NaOH and H₂SO₄ at three concentrations. Notably, despite that the non-KOH-extractable residues covered 12%–23% hemicelluloses and lignin of total biomass, their wall polymer features exhibited the predominant effects on biomass enzymatic hydrolysis including Ara substitution degree of xylan (reverse Xyl/Ara) and S/G ratio of lignin. Furthermore, the non-KOH-extractable polymer features could significantly affect lignocellulose crystallinity at p<0.05, leading to a high biomass digestibility. Hence, this study could suggest an optimal approach for genetic modification of plant cell walls in bioenergy corn.     

Effect of pretreatments and fermentation on pore size in cellulosic materials

Surface area has been proposed as a major factor determining the extent of enzymatic hydrolysis of cellulose. We used cornstalk residue (CR) and Solka Floc BW-300 (SF) as substrates and NaOH (a cellulose swelling agent) and iron sodium tartrate (FeTNa, intercolates between cellulose microfibrils) as pretreatments to study the effect of surface area on extent of fermentation. Micropore sizes (8-130 A) were determined by a solute exclusion technique using glucose, cellobiose, and polyethylene glycols as molecular probes. The pore size distributions follow the logistic model function: I = a/[1+exp(b - cX)] where I is pore volume; X = log D; D is the molecular probe diameter; and a, b, and c are constants. The pore volumes of CR (1.9 mL/g) and SF (1.6 mL/g) are increased to 2.1 mL/g by pretreatment with NaOH. Pretreatment of SF with NaOH and cornstalk residue with FeTNa caused an upward shift in the pore size distribution. Fermentation of untreated CR by rumen microbes resulted in a 46% loss of dry matter while increasing the internal pore size and decreasing the pore volume to 0.9 mL/g. Fermentation of NaOH pretreated CR resulted in a 73% loss of dry matter with little change in pore size, total pore volume, or fiber composition. Fiber analysis indicated that selective utilization of hemicellulose over cellulose in both fermentations was small. The data show that: (1) removal of hemicellulose and lignin increases dry matter disappearance upon fermentation of the remaining material; (2) relative to the size of bacterial cellulases (40-160 A), the pretreatments have little effect on increasing accessibility of surface internal to the cellulose particles; and (3) the micropore changes caused by NaOH or FeTNa treatment do not explain the enchanced fermentation obtained for treated cornstalk residue. These observations infer that external or macropore surface properties may be a significant factor in determining the extent of utilization of the solid substrates by cellulolytic microorganisms.