High-throughput screening of chromatographic separations: II. Hydrophobic interaction

A high-throughput screen (HTS) was developed to evaluate the selectivity of various hydrophobic interaction chromatography (HIC) resins for separating a mAb from aggregate species. Prior to the resin screen, the solubility of the protein was assessed to determine the allowable HIC operating region by examining 384 combinations of pH, salt, and protein concentration. The resin screen then incorporated 480 batch-binding and elution conditions with eight HIC resins in combination with six salts. The results from the screen were reproducible, and demonstrated quantitative recovery of the mAb and aggregate. The translation of the HTS batch-binding data to lab-scale chromatography columns was tested for four conditions spanning the range of product binding and selectivity. After accounting for the higher number of theoretical plates in the columns, the purity and recovery of the lab-scale column runs agreed with the HTS results demonstrating the predictive power of the filterplate system. The HTS data were further analyzed by the calculation of pertinent thermodynamic parameters such as the partition coefficient, K(P), and the separation factor, alpha. The separation factor was used to rank the purification capabilities of the resin and salt conditions explored.     

High-throughput screening of chromatographic separations: IV. Ion-exchange

Ion-exchange (IEX) chromatography steps are widely applied in protein purification processes because of their high capacity, selectivity, robust operation, and well-understood principles. Optimization of IEX steps typically involves resin screening and selection of the pH and counterion concentrations of the load, wash, and elution steps. Time and material constraints associated with operating laboratory columns often preclude evaluating more than 20-50 conditions during early stages of process development. To overcome this limitation, a high-throughput screening (HTS) system employing a robotic liquid handling system and 96-well filterplates was used to evaluate various operating conditions for IEX steps for monoclonal antibody (mAb) purification. A screening study for an adsorptive cation-exchange step evaluated eight different resins. Sodium chloride concentrations defining the operating boundaries of product binding and elution were established at four different pH levels for each resin. Adsorption isotherms were measured for 24 different pH and salt combinations for a single resin. An anion-exchange flowthrough step was then examined, generating data on mAb adsorption for 48 different combinations of pH and counterion concentration for three different resins. The mAb partition coefficients were calculated and used to estimate the characteristic charge of the resin-protein interaction. Host cell protein and residual Protein A impurity levels were also measured, providing information on selectivity within this operating window. The HTS system shows promise for accelerating process development of IEX steps, enabling rapid acquisition of large datasets addressing the performance of the chromatography step under many different operating conditions.     

Demonstration of membrane association and surface location of Mycoplasma pneumoniae antigens using monoclonal antibodies

We examined 10 monoclonal antibodies (mAbs) directed against Mycoplasma pneumoniae proteins of 200, 170, 67, 46 and 42 kDa, and one mAb directed against a glycolipid component. The membrane association of the antigens reacting with our mAbs was investigated, in particular by phase-fractionation involving use of the detergent Triton X-114. The 170 kDa protein was shown to be membrane-associated, and surface exposure of this antigen was demonstrated by its disappearance from SDS-PAGE patterns after treatment of intact mycoplasmas with proteolytic enzymes. Cross-reactions with protein antigens of Mycoplasma genitalium were also shown. A mAb directed against a component of a lipid extract, prepared by the method used for preparation of the antigen used in the complement fixation (CF) test for serological diagnosis of M. pneumoniae infection, reacted with one major and a few minor bands in thin-layer chromatography (TLC) of the crude extract. The glycolipid character of this major antigen was demonstrated by treatment of the extract with sodium periodate, and by development of the TLC with orcinol/ferric chloride. These reactive bands were the same as those detected by the use of polyclonal mouse antiserum and a human convalescent serum, a result showing that the CF antigen contains a glycolipid moiety reacting with our mAb. The surface exposure of this antigen was demonstrated by binding of mAbs to intact cells.     

金属螯合亲和层析法纯化抗乙肝核心抗原单克隆抗体

采用金属螯合亲和层析法,纯化了小鼠腹水来源的抗乙肝核心抗原单克隆抗体,对上样缓冲液的pH和离子强度、洗脱液种类和洗脱方式进行优化。结果表明,采用降低pH分步洗脱时,最佳上样缓冲液为pH8.0,20mmol/LPB+0.5mol/LNaCl,抗体在pH5.0被洗脱下来,抗体回收率80%,纯度85%。采用咪唑浓度梯度洗脱时,最佳的上样缓冲液为pH8.0,20mmol/LPB+5mmol/L咪唑,抗体纯度大于95%,回收率65%;在上样缓冲液中不添加NaCl而添加少量的咪唑,更有利于抗体分离。以上洗脱方式都能较好地保持mAb的生物学活性,为该抗体的应用提供了必要的实验基础。     

Using high throughput screening to define virus clearance by chromatography resins

High throughput screening (HTS) of chromatography resins can accelerate downstream process development by rapidly providing information on product and impurity partitioning over a wide range of experimental conditions. In addition to the removal of typical product and process‐related impurities, chromatography steps are also used to remove potential adventitious viral contaminants and non‐infectious retrovirus‐like particles expressed by rodent cell lines used for production. This article evaluates the feasibility of using HTS in a 96‐well batch‐binding format to study removal of the model retrovirus xenotropic murine leukemia virus (xMuLV) from product streams. Two resins were examined: the anion exchange resin Q Sepharose Fast Flow? (QSFF) and Capto adhere?, a mixed mode resin. QSFF batch‐binding HTS data was generated using two mAbs at various pHs, NaCl concentrations, and levels of impurities. Comparison of HTS data to that generated using the column format showed good agreement with respect to virus retentation at different pHs, NaCl concentrations and impurity levels. Results indicate that NaCl concentration and impurity level, but not pH, are key parameters that can impact xMuLV binding to both resins. Binding of xMuLV to Capto adhere appeared to tolerate higher levels of NaCl and impurity than QSFF, and showed some product‐specific impact on binding that was not observed with QSFF. Overall, the results demonstrate that the 96‐well batch‐binding HTS technique can be an effective tool for rapidly defining conditions for robust virus clearance on chromatographic resins. Biotechnol. Bioeng. 2013; 110: 1984–1994. © 2013 Wiley Periodicals, Inc.     

Site-specific inhibitors of NADPH oxidase activity and structural probes of flavocytochrome b: characterization of six monoclonal antibodies to the p22phox subunit

The integral membrane protein flavocytochrome b (Cyt b) is the catalytic core of the human phagocyte NADPH oxidase, an enzyme complex that initiates a cascade of reactive oxygen species important in the elimination of infectious agents. This study reports the generation and characterization of six mAbs (NS1, NS2, NS5, CS6, CS8, and CS9) that recognize the p22(phox) subunit of the Cyt b heterodimer. Each of the mAbs specifically detected p22(phox) by Western blot analysis but did not react with intact neutrophils in FACS studies. Phage display mapping identified core epitope regions recognized by mAbs NS2, NS5, CS6, CS8, and CS9. Fluorescence resonance energy transfer experiments indicated that mAbs CS6 and CS8 efficiently compete with Cascade Blue-labeled mAb 44.1 (a previously characterized, p22(phox)-specific mAb) for binding to Cyt b, supporting phage display results suggesting that all three Abs recognize a common region of p22(phox). Energy transfer experiments also suggested the spatial proximity of the mAb CS9 and mAb NS1 binding sites to the mAb 44.1 epitope, while indicating a more distant proximity between the mAb NS5 and mAb 44.1 epitopes. Cell-free oxidase assays demonstrated the ability of mAb CS9 to markedly inhibit superoxide production in a concentration-dependent manner, with more moderate levels of inhibition observed for mAbs NS1, NS5, CS6, and CS8. A combination of computational predictions, available experimental data, and results obtained with the mAbs reported in this study was used to generate a novel topology model of p22(phox).     

Inhibitory antibodies to human angiotensin-converting enzyme: fine epitope mapping and mechanism of action

Angiotensin I-converting enzyme (ACE), a key enzyme in cardiovascular pathophysiology, consists of two homologous domains (N and C), each bearing a Zn-dependent active site. We modeled the 3D-structure of the ACE N-domain using known structures of the C-domain of human ACE and the ACE homologue, ACE2, as templates. Two monoclonal antibodies (mAb), 3A5 and i2H5, developed against the human N-domain of ACE, demonstrated anticatalytic activity. N-domain modeling and mutagenesis of 21 amino acid residues allowed us to define the epitopes for these mAbs. Their epitopes partially overlap: amino acid residues K407, E403, Y521, E522, G523, P524, D529 are present in both epitopes. Mutation of 4 amino acid residues within the 3A5 epitope, N203E, R550A, D558L, and K557Q, increased the apparent binding of mAb 3A5 with the mutated N-domain 3-fold in plate precipitation assay, but abolished the inhibitory potency of this mAb. Moreover, mutation D558L dramatically decreased 3A5-induced ACE shedding from the surface of CHO cells expressing human somatic ACE. The inhibition of N-domain activity by mAbs 3A5 and i2H5 obeys similar kinetics. Both mAbs can bind to the free enzyme and enzyme-substrate complex, forming E.mAb and E.S.mAb complexes, respectively; however, only complex E.S can form a product. Kinetic analysis indicates that both mAbs bind better with the ACE N-domain in the presence of a substrate, which, in turn, implies that binding of a substrate causes conformational adjustments in the N-domain structure. Independent experiments with ELISA demonstrated better binding of mAbs 3A5 and i2H5 in the presence of the inhibitor lisinopril as well. This effect can be attributed to better binding of both mAbs with the "closed" conformation of ACE, therefore, disturbing the hinge-bending movement of the enzyme, which is necessary for catalysis.     

Biochemical study of a recombinant soluble interleukin-2 receptor. Evidence for a homodimeric structure

A truncated soluble form of the human interleukin-2 receptor p55 chain (T-S-IL-2R) was expressed to high levels in RODENT (mammalian) cells and affinity-purified. Its biochemical behavior was analyzed by polyacrylamide gel electrophoresis (PAGE), gel filtration, and sucrose gradient centrifugation. It migrated as a single 40-kDa band on sodium dodecyl sulfate-PAGE (reducing or nonreducing conditions), whereas it ran as a 80-kDa component on native PAGE or as a 86-kDa component on gel filtration. The combination of gel filtration and density gradient sedimentation gave a Stokes radius of 4.0 nm and a sedimentation coefficient of 3.72 S. The deduced molecular mass was 67 kDa, and the fractional ratio was 1.516. These data therefore indicated that the T-S-IL-2R was secreted as an homodimer of two noncovalently associated 40-kDa subunits. Cross-linking experiments using bifunctional reagents enabled the materialization of the dimeric structure on sodium dodecyl sulfate-PAGE. Stoichiometric binding studies using two monoclonal antibodies (mAbs 33B3.1 and 11H2) reacting with separate epitopes on the p55 chain also strongly supported the dimeric structure. Indeed, there was one binding site for the 33B3.1 mAb (and Fab fragment) per T-S-IL-2R 40-kDa subunit, whereas the 11H2 mAb (or Fab fragment) could bind only half a site per subunit, a result which could only be explained when assuming more than one subunit for the native T-S-IL-2R. Soluble interleukin-2 receptor species were also purified from culture supernatants of either L cells transfected with the full-length p55 cDNA or a normal alloreactive T cell clone. Similar biochemical behavior and reactivities with the two mAbs were found. Finally, cell-surface p55 chains expressed either by pgL21 or 4AS cells bound the 33B3.1 and 11H2 mAbs in a 2:1 ratio, suggesting that the p55 chains are also associated as homodimers when imbedded in the membrane.     

The prevention of an anomalous chromatographic behavior and the resulting successful removal of viruses from monoclonal antibody with an asymmetric charge distribution by using a membrane adsorber in highly efficient,anion-exchange chromatography in flow-through mode

Anion exchange (AEX) chromatography in the flow-through mode is a widely employed purification process for removal of process/product-related impurities and exogenous/endogenous viruses from monoclonal antibodies (mAbs). The pH of the mobile phase for AEX chromatography is typically set at half a unit below the isoelectric point (pI) of each mAb (i.e., pI − 0.5) or lower and, in combination with a low ionic strength, these conditions are usually satisfactory for both the recovery of the mAb and removal of impurities. However, we have recently encountered a tight binding of mAb1 to AEX resins under these standard chromatographic conditions. This anomalous adsorption behavior appears to be an effect of the asymmetric charge distribution on the surface of the mAb1. We found that mAb1 did not bind to the AEX resins if the mobile phase has a much lower pH and higher ionic strength, but those conditions would not allow adequate virus removal. We predicted that the use of membrane adsorbers might provide effective mAb1 purification, since the supporting matrix has a network structure that would be less susceptible to interactions with the asymmetric charge distribution on the protein surface. We tested the Natriflo HD-Q AEX membrane adsorber under standard chromatographic conditions and found that mAb1 flowed through the membrane adsorber, resulting in successful separation from murine leukemia virus. This AEX membrane adsorber is expected to be useful for process development because mAbs can be purified under similar standard chromatographic conditions regardless of their charge distributions.     

Monoclonal antibodies to meningococcal factor H binding protein with overlapping epitopes and discordant functional activity

Background

Meningococcal factor H binding protein (fHbp) is a promising vaccine candidate. Anti-fHbp antibodies can bind to meningococci and elicit complement-mediated bactericidal activity directly. The antibodies also can block binding of the human complement down-regulator, factor H (fH). Without bound fH, the organism would be expected to have increased susceptibility to bacteriolysis. Here we describe bactericidal activity of two anti-fHbp mAbs with overlapping epitopes in relation to their different effects on fH binding and bactericidal activity.

Methods and Principal Findings

Both mAbs recognized prevalent fHbp sequence variants in variant group 1. Using yeast display and site-specific mutagenesis, binding of one of the mAbs (JAR 1, IgG3) to fHbp was eliminated by a single amino acid substitution, R204A, and was decreased by K143A but not by R204H or D142A. The JAR 1 epitope overlapped that of previously described mAb (mAb502, IgG2a) whose binding to fHbp was eliminated by R204A or R204H substitutions, and was decreased by D142A but not by K143A. Although JAR 1 and mAb502 appeared to have overlapping epitopes, only JAR 1 inhibited binding of fH to fHbp and had human complement-mediated bactericidal activity. mAb502 enhanced fH binding and lacked human complement-mediated bactericidal activity. To control for confounding effects of different mouse IgG subclasses on complement activation, we created chimeric mAbs in which the mouse mAb502 or JAR 1 paratopes were paired with human IgG1 constant regions. While both chimeric mAbs showed similar binding to fHbp, only JAR 1, which inhibited fH binding, had human complement-mediated bactericidal activity.

Conclusions

The lack of human complement-mediated bactericidal activity by anti-fHbp mAb502 appeared to result from an inability to inhibit binding of fH. These results underscore the importance of inhibition of fH binding for anti-fHbp mAb bactericidal activity.     

High‐efficiency affinity precipitation of multiple industrial mAbs and Fc‐fusion proteins from cell culture harvests using Z‐ELP‐E2 nanocages

Affinity precipitation using Z‐elastin‐like polypeptide‐functionalized E2 protein nanocages has been shown to be a promising alternative to Protein A chromatography for monoclonal antibody (mAb) purification. We have previously described a high‐yielding, affinity precipitation process capable of rapidly capturing mAbs from cell culture through spontaneous, multivalent crosslinking into large aggregates. To challenge the capabilities of this technology, nanocage affinity precipitation was investigated using four industrial mAbs (mAbs A–D) and one Fc fusion protein (Fc A) with diverse molecular properties. A molar binding ratio of 3:1 Z:mAb was sufficient to precipitate >95% mAb in solution for all molecules evaluated at ambient temperature without added salt. The effect of solution pH on aggregation kinetics was studied using a simplified two‐step model to investigate the protein interactions that occur during mAb–nanocage crosslinking and to determine the optimal solution pH for precipitation. After centrifugation, the pelleted mAb–nanocage complex remained insoluble and was capable of being washed at pH ≥ 5 and eluted with at pH < 4 with >90% mAb recovery for all molecules. The four mAbs and one Fc fusion were purified from cell culture using optimal process conditions, and >94% yield and >97% monomer content were obtained. mAb A–D purification resulted in a 99.9% reduction in host cell protein and >99.99% reduction in DNA from the cell culture fluids. Nanocage affinity precipitation was equivalent to or exceeded expected Protein A chromatography performance. This study highlights the benefits of nanoparticle crosslinking for enhanced affinity capture and presents a robust platform that can be applied to any target mAb or Fc‐containing proteins with minimal optimization of process parameters.     

Bivalency of plasminogen monoclonal antibodies is required for plasminogen bridging to fibrin and enhanced plasmin formation

Binding of plasminogen to fibrin and cell surfaces is essential for fibrinolysis and pericellular proteolysis. We used surface plasmon resonance and enzyme kinetic analyses to study the effect of two mAbs (A10.2, CPL15) on plasminogen binding and activation at fibrin surfaces. A10.2 is directed against the lysine-binding site (LBS) of kringle 4, whereas CPL15 recognises a region in kringle 1 outside the LBS. In the presence of CPL15 and A10.2 mAbs, binding of plasminogen (K(d)=1.16+/-0.22 micromol/l) to fibrin was characterised by a mAb concentration-dependent bell-shaped isotherm. A progressive increase in the concentration of mAbs at the surface was also detected, and reached a plateau corresponding to the maximum of plasminogen bound. These data indicated that at low mAb concentration, bivalent plasminogen-mAb-plasminogen ternary complexes are formed, whereas at high mAb concentration, a progressive shift to monovalent plasminogen-mAb binary complexes is observed. Plasmin formation in the presence of mAbs followed a similar bell-shaped profile. Monovalent Fab fragments of mAb A10.2 showed no effect on the binding of plasminogen, confirming the notion that a bivalent mAb interaction is essential to increase plasminogen binding and activation at the surface of fibrin.     

Systematic workflow for studying domain contributions of bispecific antibodies to selectivity in multimodal chromatography

In this article, a systematic workflow was formulated and implemented to understand selectivity differences and preferred binding patches for bispecific monoclonal antibodies (mAbs) and their parental mAbs on three multimodal cation exchange resin systems. This workflow incorporates chromatographic screening of the parent mAbs and their fragments at various pH followed by surface property mapping and protein footprinting using covalent labeling followed by liquid chromatography–mass spectrometry analysis. The chromatography screens on multimodal resins with the intact mAbs indicated enhanced selectivity as compared to single-mode interaction systems. While the bispecific antibody (bsAb) eluted between the two parental mAbs on most of the resins, the retention of the bispecific transitioned from co-eluting with one parental mAb to the other parental mAb on Capto MMC. To investigate the contribution of different domains, mAb fragments were evaluated and the results indicated that the interactions were likely dominated by the Fab domain at higher pH. Protein surface property maps were then employed to hypothesize the potential preferred binding patches in the solvent-exposed regions of the parental Fabs. Finally, protein footprinting was carried out with the parental mAbs and the bsAb in the bound and unbound states at pH 7.5 to identify the preferred binding patches. Results with the intact mAb analysis supported the hypothesis that interactions with the resins were primarily driven by the residues in the Fab fragments and not the Fc. Furthermore, peptide mapping data indicated that the light chain may be playing a more important role in the higher binding of Parent A as compared with Parent B in these resin systems. Finally, results with the bsAb indicated that both halves of the molecule contributed to binding with the resins, albeit with subtle differences as compared to the parental mAbs. The workflow presented in this paper lays the foundation to systematically study the chromatographic selectivity of large multidomain molecules which can provide insights into improved biomanufacturability and expedited downstream bioprocess development.     

Characterizing and enhancing virus removal by protein A chromatography

Protein A chromatography is an effective capture step to separate Fc-containing biopharmaceuticals from cell culture impurities but is generally not effective for virus removal, which tends to vary among different products. Previous findings have pointed to the differences in feedstocks to protein A, composed of the products and other cell culture-related impurities. To separate the effect of the feedstock components on virus removal, and understand why certain monoclonal antibody (mAb) products have low virus log reduction values (LRVs) across protein A chromatography, we investigated the partitioning of three types of viruses on Eshmuno® A columns. Using pure mAbs, we found that low LRVs were correlated with the presence of the particular mAb product itself, causing altered partitioning patterns. Three virus types were tested, and the trend in partitioning was the same for retrovirus-like particles (RVLPs) expressed in the cell substrate, and its model virus xenotropic murine leukemia virus (XMuLV), whereas slightly different for murine minute virus. These results were extended from previous observation described by Bach and Connell-Crowley (2015) studying XMuLV partitioning on MabSelect SuRe columns, providing further evidence using additional types of viruses and resin. Other product-specific cell culture impurities in harvested cell culture fluid played a lesser role in causing low LRVs. In addition, using high throughput screening (HTS) methods and Eshmuno® A resin plates, we identified excipients with ionic and hydrophobic properties that could potentially alleviate the mAb-induced LRV reduction, indicating that both ionic and hydrophobic interactions were involved. More excipients of such nature or combinations, once optimized, can potentially be used as load and/or wash additives to improve virus removal by protein A. We have demonstrated that HTS is a valuable tool for this type of screening, whether to gain deeper understanding of a mechanism, or to provide guidance during the optimization of protein A process with improved virus removal.     

Monoclonal antibodies as probes of the alpha-bungarotoxin and cholinergic binding regions of the acetylcholine receptor

We have probed the acetylcholine receptor (AcChR) molecule with six anti-AcChR monoclonal antibodies (mAbs) whose binding to the AcChR is inhibited or blocked by alpha-bungarotoxin (alpha BgTx). mAbs bound with a maximum stoichiometry of either one mAb (387D, 247G) or two mAbs (383C, 572C, 370C, 249E) per AcChR monomer, and the extent to which they inhibited alpha BgTx binding directly correlated with their stoichiometry of binding. The effect of mAbs on the alpha BgTx and cholinergic ligand binding properties of the AcChR molecule defined three major categories of mAbs: those that block alpha BgTx and carbamylcholine (agonist) binding, but do not block d-tubocurarine (antagonist) binding (383C, 572C, 370C and 249E); mAb 387D, which blocks agonist binding and partially blocks alpha BgTx and d-tubocurarine binding; and mAb 247G, which does not affect agonist binding, blocks at most 50% of the alpha BgTx binding sites, and decreases the affinity of the high affinity component of d-tubocurarine binding (Mihovilovic, M., and Richman, D. P. (1984) J. Biol. Chem. 259, 15051-15059). Except for mAb 247G, these mAbs strongly competed with each other for binding to the AcChR. In contrast, mAb 247G blocks about 50% of the binding of all the other mAbs. The results demonstrate the ability of mAbs to stabilize different conformational states of the AcChR and to probe cholinergic epitopes of functional importance. They also indicate the nonequivalence of the two alpha-toxin binding regions of the AcChR molecule and suggest that it is possible to identify epitopes within the alpha BgTx binding region that when bound produce differential effects on the binding of the agonist (carbamylcholine) and the antagonist (d-tubocurarine).     

The role of antibody polyspecificity and lipid reactivity in binding of broadly neutralizing anti-HIV-1 envelope human monoclonal antibodies 2F5 and 4E10 to glycoprotein 41 membrane proximal envelope epitopes

Two neutralizing human mAbs, 2F5 and 4E10, that react with the HIV-1 envelope gp41 membrane proximal region are also polyspecific autoantibodies that bind to anionic phospholipids. To determine the autoantibody nature of these Abs, we have compared their reactivities with human anti-cardiolipin mAbs derived from a primary antiphospholipid syndrome patient. To define the role of lipid polyreactivity in binding of 2F5 and 4E10 mAbs to HIV-1 envelope membrane proximal epitopes, we determined the kinetics of binding of mAbs 2F5 and 4E10 to their nominal gp41 epitopes vs liposome-gp41 peptide conjugates. Both anti-HIV-1 mAbs 2F5 and 4E10 bound to cardiolipin with K(d) values similar to those of autoimmune anti-cardiolipin Abs, IS4 and IS6. Binding kinetics studies revealed that mAb 2F5 and 4E10 binding to their respective gp41 peptide-lipid conjugates could best be defined by a two-step (encounter-docking) conformational change model. In contrast, binding of 2F5 and 4E10 mAbs to linear peptide epitopes followed a simple Langmuir model. A mouse mAb, 13H11, that cross-blocks mAb 2F5 binding to the gp41 epitope did not cross-react with lipids nor did it neutralize HIV-1 viruses. Taken together, these data demonstrate the similarity of 2F5 and 4E10 mAbs to known anti-cardiolipin Abs and support the model that mAb 2F5 and 4E10 binding to HIV-1 involves both viral lipid membrane and gp41 membrane proximal epitopes.     

Capture and display of antibodies secreted by hybridoma cells enables fluorescent on-cell screening

Hybridoma methods for monoclonal antibody (mAb) cloning are a mainstay of biomedical research, but they are hindered by the need to maintain hybridomas in oligoclonal pools during antibody screening. Here, we describe a system in which hybridomas specifically capture and display the mAbs they secrete: On-Cell mAb Screening (OCMS?). In OCMS?, mAbs displayed on the cell surface can be rapidly assayed for expression level and binding specificity using fluorescent antigens with high-content (image-based) methods or flow cytometry. OCMS? demonstrated specific mAb binding to poliovirus and rabies virus by forming a cell surface IgG “cap”, as a universal assay for anti-viral mAbs. We produced and characterized OCMS?-enabled hybridomas secreting mAbs that neutralize poliovirus and used fluorescence microscopy to identify and clone a human mAb specific for the human N-methyl-D-aspartate receptor. Lastly, we used OCMS? to assess expression and antigen binding of a recombinant mAb produced in 293T cells. As a novel method to physically associate mAbs with the hybridomas that secrete them, OCMS? overcomes a central challenge to hybridoma mAb screening and offers new paradigms for mAb discovery and production.     

Structural analysis of human and macaque mAbs 2909 and 2.5B: implications for the configuration of the quaternary neutralizing epitope of HIV-1 gp120

The quaternary neutralizing epitope (QNE) of HIV-1 gp120 is preferentially expressed on the trimeric envelope spikes of intact HIV virions, and QNE-specific monoclonal antibodies (mAbs) potently neutralize HIV-1. Here, we present the crystal structures of the Fabs of human mAb 2909 and macaque mAb 2.5B. Both mAbs have long beta hairpin CDR H3 regions >20 ? in length that are each situated at the center of their respective antigen-binding sites. Computational analysis showed that the paratopes include the whole CDR H3, while additional CDR residues form shallow binding pockets. Structural modeling suggests a way to understand the configuration of QNEs and the antigen-antibody interaction for QNE mAbs. Our data will be useful in designing immunogens that may elicit potent neutralizing QNE Abs.