Treponema denticola cystalysin catalyzes beta-desulfination of L-cysteine sulfinic acid and beta-decarboxylation of L-aspartate and oxalacetate

Pyridoxal 5'-phosphate-dependent cystalysin from Treponema denticola catalyzes the beta-displacement of the beta-substituent from both L-aspartate and L-cysteine sulfinic acid. The steady-state kinetic parameters for beta-desulfination of L-cysteine sulfinic acid, k(cat) and K(m), are 89+/-7 s(-1) and 49+/-9 mM, respectively, whereas those for beta-decarboxylation of L-aspartate are 0.8+/-0.1 s(-1) and 280+/-70 mM. Moreover, cystalysin in the pyridoxamine 5'-phosphate form has also been found to catalyze beta-decarboxylation of oxalacetate as shown by consumption of oxalacetate and a concomitant production of pyruvate. The k(cat) and K(m) of this reaction are 0.15+/-0.01 s(-1) and 13+/-2 mM, respectively. Possible mechanistic and physiological implications are discussed.     

Assay for glucose oxidase from Aspergillus niger and Penicillium amagasakiense by Fourier transform infrared spectroscopy

A simple and direct assay method for glucose oxidase (EC 1.1.3.4) from Aspergillus niger and Penicillium amagasakiense was investigated by Fourier transform infrared spectroscopy. This enzyme catalyzed the oxidation of d-glucose at carbon 1 into d-glucono-1,5-lactone and hydrogen peroxide in phosphate buffer in deuterium oxide ((2)H(2)O). The intensity of the d-glucono-1,5-lactone band maximum at 1212 cm(-1) due to CO stretching vibration was measured as a function of time to study the kinetics of d-glucose oxidation. The extinction coefficient epsilon of d-glucono-1,5-lactone was determined to be 1.28 mM(-1)cm(-1). The initial velocity is proportional to the enzyme concentration by using glucose oxidase from both A. niger and P. amagasakiense either as cell-free extracts or as purified enzyme preparations. The kinetic constants (V(max), K(m), k(cat), and k(cat)/K(m)) determined by Lineweaver-Burk plot were 433.78+/-59.87U mg(-1) protein, 10.07+/-1.75 mM, 1095.07+/-151.19s(-1), and 108.74 s(-1)mM(-1), respectively. These data are in agreement with the results obtained by a spectrophotometric method using a linked assay based on horseradish peroxidase in aqueous media: 470.36+/-42.83U mg(-1) protein, 6.47+/-0.85 mM, 1187.77+/-108.16s(-1), and 183.58 s(-1)mM(-1) for V(max), K(m), k(cat), and k(cat)/K(m), respectively. Therefore, this spectroscopic method is highly suited to assay for glucose oxidase activity and its kinetic parameters by using either cell-free extracts or purified enzyme preparations with an additional advantage of performing a real-time measurement of glucose oxidase activity.     

Catalytic reaction pathway for the mitogen-activated protein kinase ERK2

The structural, functional, and regulatory properties of the mitogen-activated protein kinases (MAP kinases) have long attracted considerable attention owing to the critical role that these enzymes play in signal transduction. While several MAP kinase X-ray crystal structures currently exist, there is by comparison little mechanistic information available to correlate the structural data with the known biochemical properties of these molecules. We have employed steady-state kinetic and solvent viscosometric techniques to characterize the catalytic reaction pathway of the MAP kinase ERK2 with respect to the phosphorylation of a protein substrate, myelin basic protein (MBP), and a synthetic peptide substrate, ERKtide. A minor viscosity effect on k(cat) with respect to the phosphorylation of MBP was observed (k(cat) = 10 +/- 2 s(-1), k(cat)(eta) = 0.18 +/- 0.05), indicating that substrate processing occurs via slow phosphoryl group transfer (12 +/- 4 s(-1)) followed by the faster release of products (56 +/- 4 s(-1)). At an MBP concentration extrapolated to infinity, no significant viscosity effect on k(cat)/K(m(ATP)) was observed (k(cat)/K(m(ATP)) = 0.2 +/- 0.1 microM(-1) s(-1), k(cat)/K(m(ATP))(eta) = -0.08 +/- 0.04), consistent with rapid-equilibrium binding of the nucleotide. In contrast, at saturating ATP, a full viscosity effect on k(cat)/K(m) for MBP was apparent (k(cat)/K(m(MBP)) = 2.4 +/- 1 microM(-1) s(-1), k(cat)/K(m(MBP))(eta) = 1.0 +/- 0.1), while no viscosity effect was observed on k(cat)/K(m) for the phosphorylation of ERKtide (k(cat)/K(m(ERKtide)) = (4 +/- 2) x 10(-3) microM(-1) s(-1), k(cat)/K(m(ERKtide))(eta) = -0.02 +/- 0.02). This is consistent with the diffusion-limited binding of MBP, in contrast to the rapid-equilibrium binding of ERKtide, to form the ternary Michaelis complex. Calculated values for binding constants show that the estimated value for K(d(MBP)) (/= 1.5 mM). The dramatically higher catalytic efficiency of MBP in comparison to that of ERKtide ( approximately 600-fold difference) is largely attributable to the slow dissociation rate of MBP (/=56 s(-1)), from the ERK2 active site.     

Characterization of an arginine:pyruvate transaminase in arginine catabolism of Pseudomonas aeruginosa PAO1

The arginine transaminase (ATA) pathway represents one of the multiple pathways for L-arginine catabolism in Pseudomonas aeruginosa. The AruH protein was proposed to catalyze the first step in the ATA pathway, converting the substrates L-arginine and pyruvate into 2-ketoarginine and L-alanine. Here we report the initial biochemical characterization of this enzyme. The aruH gene was overexpressed in Escherichia coli, and its product was purified to homogeneity. High-performance liquid chromatography and mass spectrometry (MS) analyses were employed to detect the presence of the transamination products 2-ketoarginine and L-alanine, thus demonstrating the proposed biochemical reaction catalyzed by AruH. The enzymatic properties and kinetic parameters of dimeric recombinant AruH were determined by a coupled reaction with NAD(+) and L-alanine dehydrogenase. The optimal activity of AruH was found at pH 9.0, and it has a novel substrate specificity with an order of preference of Arg > Lys > Met > Leu > Orn > Gln. With L-arginine and pyruvate as the substrates, Lineweaver-Burk plots of the data revealed a series of parallel lines characteristic of a ping-pong kinetic mechanism with calculated V(max) and k(cat) values of 54.6 +/- 2.5 micrromol/min/mg and 38.6 +/- 1.8 s(-1). The apparent K(m) and catalytic efficiency (k(cat)/K(m)) were 1.6 +/- 0.1 mM and 24.1 mM(-1) s(-1) for pyruvate and 13.9 +/- 0.8 mM and 2.8 mM(-1) s(-1) for l-arginine. When L-lysine was used as the substrate, MS analysis suggested Delta(1)-piperideine-2-carboxylate as its transamination product. These results implied that AruH may have a broader physiological function in amino acid catabolism.     

Rescue of the orphan enzyme isoguanine deaminase

Cytosine deaminase (CDA) from Escherichia coli was shown to catalyze the deamination of isoguanine (2-oxoadenine) to xanthine. Isoguanine is an oxidation product of adenine in DNA that is mutagenic to the cell. The isoguanine deaminase activity in E. coli was partially purified by ammonium sulfate fractionation, gel filtration, and anion exchange chromatography. The active protein was identified by peptide mass fingerprint analysis as cytosine deaminase. The kinetic constants for the deamination of isoguanine at pH 7.7 are as follows: k(cat) = 49 s(-1), K(m) = 72 μM, and k(cat)/K(m) = 6.7 × 10(5) M(-1) s(-1). The kinetic constants for the deamination of cytosine are as follows: k(cat) = 45 s(-1), K(m) = 302 μM, and k(cat)/K(m) = 1.5 × 10(5) M(-1) s(-1). Under these reaction conditions, isoguanine is the better substrate for cytosine deaminase. The three-dimensional structure of CDA was determined with isoguanine in the active site.     

Constitutive expression, purification and characterization of a phosphoglucomutase from Fusarium oxysporum

The phosphoglucomutase gene from a wild type Fusarium oxysporum strain (F3), was homologously expressed, under the control of the constitutive promoter of gpdA of Aspergillus nidulans. The transformant produced elevated levels of phosphoglucomutase activity compared to the wild type, a fact that facilitated the subsequent purification procedure. The enzyme (FoPGM) was purified to homogeneity applying three anion exchange and one gel filtration chromatography steps. The native enzyme revealed a monomeric structure with a molecular mass of 60 kDa, while the isoelectric point was 3.5. FoPGM was active in pH ranged from 6.0 to 8.0, with an optimum using 3-(N-morpholino)propanesulfonic acid buffer at 7.0, while loss of activity was observed when phosphate buffer was used in the above mentioned pH range. The optimal temperature for activity was 45°C but the enzyme became unstable at temperatures above 40°C. FoPGM requires the presence of a divalent cation for its function with maximum activity being obtained with Co(2+). The apparent K(m) for Co(2+) was found to be 10 μM. The enzyme was also active with other divalent metal ions such as Mn(2+), Mg(2+), Ni(2+) and Ca(2+) but to a lesser extent. The following kinetic constants were determined: v(max), 0.74 μmol mg(protein)(-1)min(-1); k(cat), 44.2 min(-1); K(m)(G1P), 0.10mM; K(m)(G1,6 diP), 1.03 μM; k(cat)/K(m)(G1P), 443 mM(-1)min(-1) and k(cat)/K(m)(G1,6 diP), 42,860 mM(-1)min(-1). The enzyme was considered to follow a Ping Pong substituted enzyme or enzyme isomerization mechanism.     

Redefining the minimal substrate tolerance of mandelate racemase. Racemization of trifluorolactate

Mandelate racemase (EC 5.1.2.2) from Pseudomonas putida catalyzes the interconversion of the enantiomers of mandelic acid and a variety of aryl- and heteroaryl-substituted mandelate derivatives, suggesting that β,γ-unsaturation is a requisite feature of substrates for the enzyme. We show that β,γ-unsaturation is not an absolute requirement for catalysis and that mandelate racemase can bind and catalyze the racemization of (S)-trifluorolactate (k(cat) = 2.5 ± 0.3 s(-1), K(m) = 1.74 ± 0.08 mM) and (R)-trifluorolactate (k(cat) = 2.0 ± 0.2 s(-1), K(m) = 1.2 ± 0.2 mM). The enzyme was shown to catalyze hydrogen-deuterium exchange at the α-postion of trifluorolactate using (1)H NMR spectrocsopy. β-Elimination of fluoride was not detected using (19)F NMR spectroscopy. Although mandelate racemase bound trifluorolactate with an affinity similar to that exhibited for mandelate, the turnover numbers (k(cat)) were markedly reduced by ～318-fold, resulting in catalytic efficiencies (k(cat)/K(m)) that were ~400-fold lower than those observed for mandelate. These observations suggested that chemical steps on the enzyme were likely rate-determining, which was confirmed by demonstrating that the rates of mandelate racemase-catalyzed racemization of (S)-trifluorolactate were not dependent upon the solvent microviscosity. Circular dichroism spectroscopy was used to measure the rates of nonenzymatic racemization of (S)-trifluorolactate at elevated temperatures. The values of ΔH(?) and ΔS(?) for the nonenzymatic racemization reaction were determined to be 28.0 (±0.7) kcal/mol and -15.7 (±1.7) cal K(-1) mol(-1), respectively, corresponding to a free energy of activation equal to 33 (±4) kcal/mol at 25 °C. Hence, mandelate racemase stabilizes the altered trifluorolactate in the transition state (ΔG(tx)) by at least 20 kcal/mol.     

Staphylococcus aureus sortase transpeptidase SrtA: insight into the kinetic mechanism and evidence for a reverse protonation catalytic mechanism

The Staphylococcus aureus transpeptidase SrtA catalyzes the covalent attachment of LPXTG-containing virulence and colonization-associated proteins to cell-wall peptidoglycan in Gram-positive bacteria. Recent structural characterizations of staphylococcal SrtA, and related transpeptidases SrtB from S. aureus and Bacillus anthracis, provide many details regarding the active site environment, yet raise questions with regard to the nature of catalysis and active site cysteine thiol activation. Here we re-evaluate the kinetic mechanism of SrtA and shed light on aspects of its catalytic mechanism. Using steady-state, pre-steady-state, bisubstrate kinetic studies, and high-resolution electrospray mass spectrometry, revised steady-state kinetic parameters and a ping-pong hydrolytic shunt kinetic mechanism were determined for recombinant SrtA. The pH dependencies of kinetic parameters k(cat)/K(m) and k(cat) for the substrate Abz-LPETG-Dap(Dnp)-NH(2) were bell-shaped with pK(a) values of 6.3 +/- 0.2 and 9.4 +/- 0.2 for k(cat) and 6.2 +/- 0.2 and 9.4 +/- 0.2 for k(cat)/K(m). Solvent isotope effect (SIE) measurements revealed inverse behavior, with a (D)2(O)k(cat) of 0.89 +/- 0.01 and a (D)2(O)(k(cat)/K(m)) of 0.57 +/- 0.03 reflecting an equilibrium SIE. In addition, SIE measurements strongly implicated Cys184 participation in the isotope-sensitive rate-determining chemical step when considered in conjunction with an inverse linear proton inventory for k(cat). Last, the pH dependence of SrtA inactivation by iodoacetamide revealed a single ionization for inactivation. These studies collectively provide compelling evidence for a reverse protonation mechanism where a small fraction (ca. 0.06%) of SrtA is competent for catalysis at physiological pH, yet is highly active with an estimated k(cat)/K(m) of >10(5) M(-)(1) s(-)(1).     

Enzyme-coupled assay for beta-xylosidase hydrolysis of natural substrates

We describe here a new enzyme-coupled assay for the quantitation of d-xylose using readily available enzymes that allows kinetic evaluation of hemicellulolytic enzymes using natural xylooligosaccharide substrates. Hydrogen peroxide is generated as an intermediary analyte, which allows flexibility in the choice of the chromophore or fluorophore used as the final reporter. Thus, we present d-xylose quantitation results for solution-phase assays performed with both the fluorescent reporter resorufin, generated from N-acetyl-3,7-dihydroxyphenoxazine (Amplex Red), and 2,2'-azino-bis(3-ethylbenzothiazoline-6-sulfonate) (ABTS), whose corresponding radical cation has an absorbance maximum at approximately 400 nm. We also describe a useful solid-phase variation of the assay performed with the peroxidase substrate 3,3'-diaminobenzidine tetrahydrochloride, which produces an insoluble brown precipitate. In addition, kinetic parameters for hydrolysis of the natural substrates xylobiose and xylotriose were obtained using this assay for a glycosyl hydrolase family 39 beta-xylosidase from Thermoanaerobacterium sp. strain JW/SL YS485 (Swiss-Prot accession no. O30360). At higher xylobiose substrate concentrations the enzyme showed an increase in the rate indicative of transglycosylation, while for xylotriose marked substrate inhibition was observed. At lower xylobiose concentrations k(cat) was 2.7 +/- 0.4 s(-1), K(m) was 3.3 +/- 0.7 mM, and k(cat)/K(m) was 0.82 +/- 0.21 mM(-1) . s(-1). Nonlinear curve fitting to a substrate inhibition model showed that for xylotriose K(i) was 1.7 +/- 0.1 mM, k(cat) was 2.0 +/- 0.1 s(-1), K(m) was 0.144 +/- 0.011 mM, and k(cat)/K(m) was 14 +/- 1.3 mM(-1) . s(-1).     

Biochemical analysis of the substrate specificity of the beta-ketoacyl-acyl carrier protein synthase domain of module 2 of the erythromycin polyketide synthase

The beta-ketoacyl-acyl carrier protein synthase (KS) domain of the modular 6-deoxyerythronolide B synthase (DEBS) catalyzes the fundamental chain building reaction of polyketide biosynthesis. The KS-catalyzed reaction involves two discrete steps consisting of formation of an acyl-enzyme intermediate generated from the incoming acylthioester substrate and an active site cysteine residue, and the conversion of this intermediate to the beta-ketoacyl-acyl carrier protein product by a decarboxylative condensation with a paired methylmalonyl-SACP. We have determined the rate constants for the individual biochemical steps by a combination of protein acylation and transthioesterification experiments. The first-order rate constant (k(2)) for formation of the acyl-enzyme intermediate from [1-(14)C]-(2S,3R)-2-methyl-3-hydroxypentanoyl-SNAC (2) and recombinant DEBS module 2 is 5.8 +/- 2.6 min(-)(1), with a dissociation constant (K(S)) of 3.5 +/- 2.8 mM. The acyl-enzyme adduct was formed at a near-stoichiometric ratio of approximately 0.8:1. Transthioesterification between unlabeled diketide-SNAC 2 and N-[1-(14)C-acetyl]cysteamine gave a k(exch) of 0.15 +/- 0.06 min(-)(1), with a K(m) for HSNAC of 5.7 +/- 4.9 mM and a K(m) for 2 of 5.3 +/- 0.9 mM. Under the conditions that were used, k(exch) was equal to k(-)(2), the first-order rate constant for reversal of the acyl-enzyme-forming reaction. Since the rate of the decarboxylative condensation is much greater that the rate of reversion to the starting material (k(3) > k(-)(2)), formation of the acyl-enzyme adduct is effectively irreversible, thereby establishing that the observed value of the specificity constant (k(cat)/K(m)) is solely a reflection of the intrinsic substrate specificity of the KS-catalyzed acyl-enzyme-forming reaction. These findings were also extended to a panel of diketide- and triketide-SNAC analogues, revealing that some substrate analogues that are not converted to product by DEBS module 2 form dead-end acyl-enzyme intermediates.     

Purification and characterization of a novel erythrose reductase from Candida magnoliae

Erythritol biosynthesis is catalyzed by erythrose reductase, which converts erythrose to erythritol. Erythrose reductase, however, has never been characterized in terms of amino acid sequence and kinetics. In this study, NAD(P)H-dependent erythrose reductase was purified to homogeneity from Candida magnoliae KFCC 11023 by ion exchange, gel filtration, affinity chromatography, and preparative electrophoresis. The molecular weights of erythrose reductase determined by sodium dodecyl sulfate-polyacrylamide gel electrophoresis and gel filtration chromatography were 38,800 and 79,000, respectively, suggesting that the enzyme is homodimeric. Partial amino acid sequence analysis indicates that the enzyme is closely related to other yeast aldose reductases. C. magnoliae erythrose reductase catalyzes the reduction of various aldehydes. Among aldoses, erythrose was the preferred substrate (K(m) = 7.9 mM; k(cat)/K(m) = 0.73 mM(-1) s(-1)). This enzyme had a dual coenzyme specificity with greater catalytic efficiency with NADH (k(cat)/K(m) = 450 mM(-1) s(-1)) than with NADPH (k(cat)/K(m) = 5.5 mM(-1) s(-1)), unlike previously characterized aldose reductases, and is specific for transferring the 4-pro-R hydrogen of NADH, which is typical of members of the aldo/keto reductase superfamily. Initial velocity and product inhibition studies are consistent with the hypothesis that the reduction proceeds via a sequential ordered mechanism. The enzyme required sulfhydryl compounds for optimal activity and was strongly inhibited by Cu(2+) and quercetin, a strong aldose reductase inhibitor, but was not inhibited by aldehyde reductase inhibitors and did not catalyze the reduction of the substrates for carbonyl reductase. These data indicate that the C. magnoliae erythrose reductase is an NAD(P)H-dependent homodimeric aldose reductase with an unusual dual coenzyme specificity.     

Analyzing the catalytic mechanism of the Fe-type nitrile hydratase from Comamonas testosteroni Ni1

In order to gain insight into the catalytic mechanism of Fe-type nitrile hydratases (NHase), the pH and temperature dependence of the kinetic parameters k cat, K m, and k cat/ K m along with the solvent isotope effect were examined for the Fe-type NHase from Comamonas testosteroni Ni1 ( CtNHase). CtNHase was found to exhibit a bell-shaped curve for plots of relative activity vs pH over pH values 4-10 for the hydration of acrylonitrile and was found to display maximal activity at pH approximately 7.2. Fits of these data provided a p K ES1 value of 6.1 +/- 0.1, a p K ES2 value of 9.1 +/- 0.2 ( k' cat = 10.1 +/- 0.3 s (-1)), a p K E1 value of 6.2 +/- 0.1, and a p K E2 value of 9.2 +/- 0.1 ( k' cat/ K' m of 2.0 +/- 0.2 s (-1) mM (-1)). Proton inventory studies indicate that two protons are transferred in the rate-limiting step of the reaction at pH 7.2. Since CtNHase is stable to 25 degrees C, an Arrhenius plot was constructed by plotting ln( k cat) vs 1/ T, providing an E a of 33.3 +/- 1.5 kJ/mol. Delta H degrees of ionization values were also determined, thus helping to identify the ionizing groups exhibiting the p K ES1 and p K ES2 values. Based on Delta H degrees ion data, p K ES1 is assigned to betaTyr68 while p K ES2 is assigned to betaArg52, betaArg157, or alphaSer116 (NHases are alpha 2beta 2 heterotetramers). Given the strong similarities in the kinetic data obtained for both Co- and Fe-type NHase enzymes, both types of NHase enzymes likely hydrate nitriles in a similar fashion.     

Characterization of a novel D-lyxose isomerase from Cohnella laevoribosii RI-39 sp. nov

A newly isolated bacterium, Cohnella laevoribosii RI-39, could grow in a defined medium with L-ribose as the sole carbon source. A 21-kDa protein isomerizing L-ribose to L-ribulose, as well as D-lyxose to D-xylulose, was purified to homogeneity from this bacterium. Based on the N-terminal and internal amino acid sequences of the purified enzyme obtained by N-terminal sequencing and quantitative time of flight mass spectrometry-mass spectrometry analyses, a 549-bp gene (lyxA) encoding D-lyxose (L-ribose) isomerase was cloned and expressed in Escherichia coli. The purified endogenous enzyme and the recombinant enzyme formed homodimers that were activated by Mn(2+). C. laevoribosii D-lyxose (L-ribose) isomerase (CLLI) exhibits maximal activity at pH 6.5 and 70 degrees C in the presence of Mn(2+) for D-lyxose and L-ribose, and its isoelectric point (pI) is 4.2 (calculated pI, 4.9). The enzyme is specific for D-lyxose, L-ribose, and D-mannose, with apparent K(m) values of 22.4 +/- 1.5 mM, 121.7 +/- 10.8 mM, and 34.0 +/- 1.1 mM, respectively. The catalytic efficiencies (k(cat)/K(m)) of CLLI were 84.9 +/- 5.8 mM(-1) s(-1) for D-lyxose (V(max), 5,434.8 U mg(-1)), 0.2 mM(-1) s(-1) for L-ribose (V(max), 75.5 +/- 6.0 U mg(-1)), and 1.4 +/- 0.1 mM(-1) s(-1) for D-mannose (V(max), 131.8 +/- 7.4 U mg(-1)). The ability of lyxA to permit E. coli cells to grow on D-lyxose and L-ribose and homology searches of other sugar-related enzymes, as well as previously described sugar isomerases, suggest that CLLI is a novel type of rare sugar isomerase.     

A comparative biochemical and structural analysis of the intracellular chorismate mutase (Rv0948c) from Mycobacterium tuberculosis H(37)R(v) and the secreted chorismate mutase (y2828) from Yersinia pestis

The Rv0948c gene from Mycobacterium tuberculosis H(37)R(v) encodes a 90 amino acid protein as the natural gene product with chorismate mutase (CM) activity. The protein, 90-MtCM, exhibits Michaelis-Menten kinetics with a k(cat) of 5.5+/-0.2s(-1) and a K(m) of 1500+/-100microm at 37 degrees C and pH7.5. The 2.0A X-ray structure shows that 90-MtCM is an all alpha-helical homodimer (Protein Data Bank ID: 2QBV) with the topology of Escherichia coli CM (EcCM), and that both protomers contribute to each catalytic site. Superimposition onto the structure of EcCM and the sequence alignment shows that the C-terminus helix3 is shortened. The absence of two residues in the active site of 90-MtCM corresponding to Ser84 and Gln88 of EcCM appears to be one reason for the low k(cat). Hence, 90-MtCM belongs to a subfamily of alpha-helical AroQ CMs termed AroQ(delta.) The CM gene (y2828) from Yersinia pestis encodes a 186 amino acid protein with an N-terminal signal peptide that directs the protein to the periplasm. The mature protein, *YpCM, exhibits Michaelis-Menten kinetics with a k(cat) of 70+/-5s(-1) and K(m) of 500+/-50microm at 37 degrees C and pH7.5. The 2.1A X-ray structure shows that *YpCM is an all alpha-helical protein, and functions as a homodimer, and that each protomer has an independent catalytic unit (Protein Data Bank ID: 2GBB). *YpCM belongs to the AroQ(gamma) class of CMs, and is similar to the secreted CM (Rv1885c, *MtCM) from M.tuberculosis.     

Cloning and characterization of histamine dehydrogenase from Nocardioides simplex

Histamine dehydrogenase (NSHADH) can be isolated from cultures of Nocardioides simplex grown with histamine as the sole nitrogen source. A previous report suggested that NSHADH might contain the quinone cofactor tryptophan tryptophyl quinone (TTQ). Here, the hdh gene encoding NSHADH is cloned from the genomic DNA of N. simplex, and the isolated enzyme is subjected to a full spectroscopic characterization. Protein sequence alignment shows NSHADH to be related to trimethylamine dehydrogenase (TMADH: EC 1.5.99.7), where the latter contains a bacterial ferredoxin-type [4Fe-4S] cluster and 6-S-cysteinyl FMN cofactor. NSHADH has no sequence similarity to any TTQ containing amine dehydrogenases. NSHADH contains 3.6+/-0.3 mol Fe and 3.7+/-0.2 mol acid labile S per subunit. A comparison of the UV/vis spectra of NSHADH and TMADH shows significant similarity. The EPR spectrum of histamine reduced NSHADH also supports the presence of the flavin and [4Fe-4S] cofactors. Importantly, we show that NSHADH has a narrow substrate specificity, oxidizing only histamine (K(m)=31+/-11 microM, k(cat)/K(m)=2.1 (+/-0.4)x10(5)M(-1)s(-1)), agmatine (K(m)=37+/-6 microM, k(cat)/K(m)=6.0 (+/-0.6)x10(4)M(-1)s(-1)), and putrescine (K(m)=1280+/-240 microM, k(cat)/K(m)=1500+/-200 M(-1)s(-1)). A kinetic characterization of the oxidative deamination of histamine by NSHADH is presented that includes the pH dependence of k(cat)/K(m) (histamine) and the measurement of a substrate deuterium isotope effect, (D)(k(cat)/K(m) (histamine))=7.0+/-1.8 at pH 8.5. k(cat) is also pH dependent and has a reduced substrate deuterium isotope of (D)(k(cat))=1.3+/-0.2.     

Biochemical characterization of recombinant L-asparaginase (AnsA) from Rhizobium etli, a member of an increasing rhizobial-type family of L-asparaginases

We report the expression, purification, and characterization of L-asparaginase (AnsA) from Rhizobium etli. The enzyme was purified to homogeneity in a single-step procedure involving affinity chromatography, and the kinetic parameters K(m), V(max), and k(cat) for L-asparagine were determined. The enzymatic activity in the presence of a number of substrates and metal ions was investigated. The molecular mass of the enzyme was 47 kDa by SDS-PAGE. The enzyme showed a maximal activity at 50 degrees C, but the optimal temperature of activity was 37 degrees C. It also showed maximal and optimal activities at pH 9.0. The values of K(m), V(max), k(cat), and k(cat)/K(m) were 8.9 +/- 0.967 × 10?3 M, 128 +/- 2.8 U/mg protein, 106 +/- 2 s?1, and 1.2 +/- 0.105 × 10? M?1s?1, respectively. The L-asparaginase activity was reduced in the presence of Mn2?, Zn2?, Ca2?, and Mg2? metal ions for about 52% to 31%. In addition, we found that NH??, L-Asp, D-Asn, and beta-aspartyl-hydroxamate in the reaction buffer reduced the activity of the enzyme, whereas L-Gln did not modify its enzymatic activity. This is the first report on the expression and characterization of the L-asparaginase (AnsA) from R. etli. Phylogenetic analysis of asparaginases reveals an increasing group of known sequences of the Rhizobialtype asparaginase II family.     

Human glutathione transferase A3-3, a highly efficient catalyst of double-bond isomerization in the biosynthetic pathway of steroid hormones.

The cDNA of a novel human glutathione transferase (GST) of the Alpha class was cloned, and the corresponding protein, denoted GST A3-3, was heterologously expressed and characterized. GST A3-3 was found to efficiently catalyze obligatory double-bond isomerizations of Delta(5)-androstene-3,17-dione and Delta(5)-pregnene-3,20-dione, precursors to testosterone and progesterone, respectively, in steroid hormone biosynthesis. The catalytic efficiency (k(cat)/K(m)) with Delta(5)-androstene-3,17-dione was determined as 5 x 10(6) m(-1) s(-1), which is considerably higher than with any other GST substrate tested. The rate of acceleration afforded by GST A3-3 is 6 x 10(8) based on the ratio between k(cat) and the rate constant for the nonenzymatic isomerization of Delta(5)-androstene-3,17-dione. Besides being high in absolute numbers, the k(cat)/K(m) value of GST A3-3 exceeds by a factor of approximately 230 that of 3beta-hydroxysteroid dehydrogenase/isomerase, the enzyme generally considered to catalyze the Delta(5)-Delta(4) double-bond isomerization. Furthermore, GSTA3-specific polymerase chain reaction analysis of cDNA libraries from various tissues showed a message only in those characterized by active steroid hormone biosynthesis, indicating a selective expression of GST A3-3 in these tissues. Based on this finding and the high activity with steroid substrates, we propose that GST A3-3 has evolved to catalyze isomerization reactions that contribute to the biosynthesis of steroid hormones.     

Identification of the zinc binding ligands and the catalytic residue in human aspartoacylase, an enzyme involved in Canavan disease

Canavan disease is an autosomal-recessive neurodegenerative disorder caused by a lack of aspartoacylase, the enzyme that degrades N-acetylaspartate (NAA) into acetate and aspartate. With a view to studying the mechanisms underlying the action of human aspartoacylase (hASP), this enzyme was expressed in a heterologous Escherichia coli system and characterized. The recombinant protein was found to have a molecular weight of 36 kDa and kinetic constants K(m) and k(cat) of 0.20 +/- 0.03 mM and 14.22 +/- 0.48 s(-1), respectively. Sequence alignment showed that this enzyme belongs to the carboxypeptidase metalloprotein family having the conserved motif H(21)xxE(24)(91aa)H(116). We further investigated the active site of hASP by performing modelling studies and site-directed mutagenesis. His21, Glu24 and His116 were identified here for the first time as the residues involved in the zinc-binding process. In addition, mutations involving the Glu178Gln and Glu178Asp residues resulted in the loss of enzyme activity. The finding that wild-type and Glu178Asp have the same K(m) but different k(cat) values confirms the idea that the carboxylate group contributes importantly to the enzymatic activity of aspartoacylase.     

Characterization of a phenylacetate-CoA ligase from Penicillium chrysogenum

Enzymatic activation of PAA (phenylacetic acid) to phenylacetyl-CoA is an important step in the biosynthesis of the beta-lactam antibiotic penicillin G by the fungus Penicillium chrysogenum. CoA esters of PAA and POA (phenoxyacetic acid) act as acyl donors in the exchange of the aminoadipyl side chain of isopenicillin N to produce penicillin G or penicillin V. The phl gene, encoding a PCL (phenylacetate-CoA ligase), was cloned in Escherichia coli as a maltose-binding protein fusion and the biochemical properties of the enzyme were characterized. The recombinant fusion protein converted PAA into phenylacetyl-CoA in an ATP- and magnesium-dependent reaction. PCL could also activate POA, but the catalytic efficiency of the enzyme was rather low with k(cat)/K(m) values of 0.23+/-0.06 and 7.8+/-1.2 mM(-1).s(-1) for PAA and POA respectively. Surprisingly, PCL was very efficient in catalysing the conversion of trans-cinnamic acids to the corresponding CoA thioesters [k(cat)/K(m)=(3.1+/-0.4)x10(2) mM(-1).s(-1) for trans-cinnamic acid]. Of all the substrates screened, medium-chain fatty acids, which also occur as the side chains of the natural penicillins F, DF, H and K, were the best substrates for PCL. The high preference for fatty acids could be explained by a homology model of PCL that was constructed on the basis of sequence similarity with the Japanese firefly luciferase. The results suggest that PCL has evolved from a fatty-acid-activating ancestral enzyme that may have been involved in the beta-oxidation of fatty acids.     

Rhodobacter capsulatus 1-deoxy-D-xylulose 5-phosphate synthase: steady-state kinetics and substrate binding

1-Deoxy-d-xylulose 5-phosphate synthase (DXP synthase) catalyzes the thiamine diphosphate (TPP)-dependent condensation of pyruvate and d-glyceraldehyde 3-phosphate (GAP) to yield DXP in the first step of the methylerythritol phosphate pathway for isoprenoid biosynthesis. Steady-state kinetic constants for DXP synthase calculated from the initial velocities measured at varying concentrations of substrates were as follows: k(cat) = 1.9 +/- 0.1 s(-1), K(m)(GAP) = 0.068 +/- 0.001 mM, and K(m)(pyruvate) = 0.44 +/- 0.05 mM for pyruvate and GAP; k(cat) = 1.7 +/- 0.1 s(-1), K(m)(d-glyceraldehyde) = 33 +/- 3 mM, and K(m)(pyruvate) = 1.9 +/- 0.5 mM for d-glyceraldehyde and pyruvate. beta-Fluoropyruvate was investigated as a dead-end inhibitor for pyruvate. Double-reciprocal plots showed a competitive inhibition pattern with respect to pyruvate and noncompetitive inhibition with respect to GAP/d-glyceraldehyde. (14)CO(2) trapping experiments demonstrated that the binding of both substrates (pyruvate and GAP/d-glyceraldehyde) is required for the formation of a catalytically competent enzyme-substrate complex. These results are consistent with an ordered mechanism for DXP synthase where pyruvate binds before GAP/d-glyceraldehyde.