DNA recognition sites activate MuA transposase to perform transposition of non-Mu DNA.

Mu transposition occurs within a large protein-DNA complex called a transpososome. This stable complex includes four subunits of MuA transposase, each contacting a 22-base pair recognition site located near an end of the transposon DNA. These MuA recognition sites are critical for assembling the transpososome. Here we report that when concentrations of Mu DNA are limited, the MuA recognition sites permit assembly of transpososomes in which non-Mu DNA substitutes for some of the Mu sequences. These "hybrid" transpososomes are stable to competitor DNA, actively transpose the non-Mu DNA, and produce transposition products that had been previously observed but not explained. The strongest activator of non-Mu transposition is a DNA fragment containing two MuA recognition sites and no cleavage site, but a shorter fragment with just one recognition site is sufficient. Based on our results, we propose that MuA recognition sites drive assembly of functional transpososomes in two complementary ways. Multiple recognition sites help physically position MuA subunits in the transpososome plus each individual site allosterically activates transposase.     

DNA glycosylase recognition and catalysis

DNA glycosylases are the enzymes responsible for recognizing base lesions in the genome and initiating base excision DNA repair. Recent structural and biochemical results have provided novel insights into DNA damage recognition and repair. The basis of the recognition of the oxidative lesion 8-oxoguanine by two structurally unrelated DNA glycosylases is now understood and has been revealed to involve surprisingly similar strategies. Work on MutM (Fpg) has produced structures representing three discrete reaction steps. The NMR structure of 3-methyladenine glycosylase I revealed its place among the structural families of DNA glycosylases and the X-ray structure of SMUG1 likewise confirmed that this protein is a member of the uracil DNA glycosylase superfamily. A novel disulfide cross-linking strategy was used to obtain the long-anticipated structure of MutY bound to DNA containing an A*oxoG mispair.     

Flexibility in MuA transposase family protein structures: functional mapping with scanning mutagenesis and sequence alignment of protein homologues

MuA transposase protein is a member of the retroviral integrase superfamily (RISF). It catalyzes DNA cleavage and joining reactions via an initial assembly and subsequent structural transitions of a protein-DNA complex, known as the Mu transpososome, ultimately attaching transposon DNA to non-specific target DNA. The transpososome functions as a molecular DNA-modifying machine and has been used in a wide variety of molecular biology and genetics/genomics applications. To analyze structure-function relationships in MuA action, a comprehensive pentapeptide insertion mutagenesis was carried out for the protein. A total of 233 unique insertion variants were generated, and their activity was analyzed using a quantitative in vivo DNA transposition assay. The results were then correlated with the known MuA structures, and the data were evaluated with regard to the protein domain function and transpososome development. To complement the analysis with an evolutionary component, a protein sequence alignment was produced for 44 members of MuA family transposases. Altogether, the results pinpointed those regions, in which insertions can be tolerated, and those where insertions are harmful. Most insertions within the subdomains Iγ, IIα, IIβ, and IIIα completely destroyed the transposase function, yet insertions into certain loop/linker regions of these subdomains increased the protein activity. Subdomains Iα and IIIβ were largely insertion-tolerant. The comprehensive structure-function data set will be useful for designing MuA transposase variants with improved properties for biotechnology/genomics applications, and is informative with regard to the function of RISF proteins in general.     

DNA sequence of IS91 and identification of the transposase gene.

IS91 is a 1,830-bp insertion sequence that inserts specifically at the sequence CAAG or GAAC of the target and does not duplicate any sequence upon insertion (23). By transposon mutagenesis, we have identified open reading frame 426 (ORF426; bp 454 to 1731) as the putative ORF for the transposase. It displays a cysteine-rich, potential metal-binding domain in its N-terminal region. Adjacent to ORF426, there is an ORF (ORF121) which precedes and terminally overlaps ORF426 by one amino acid. Tn1732 insertions in ORF121 do not affect the transposition frequency. IS91 has sequence similarities to IS801 from Pseudomonas syringae. Their putative transposases are 36% identical, including conservation of the cysteine-rich cluster. The information concerning IS801 insertion specificity and target duplication has been reevaluated in the light of our results.     

A new method for determining the stereochemistry of DNA cleavage reactions: application to the SfiI and HpaII restriction endonucleases and to the MuA transposase

A new method was developed for tracking the stereochemical path of enzymatic cleavage of DNA. DNA with a phosphorothioate of known chirality at the scissile bond is cleaved by the enzyme in H218O. The cleavage produces a DNA molecule with the 5'-[16O,18O, S]-thiophosphoryl group, whose chirality depends on whether the cleavage reaction proceeds by a single-step hydrolysis mechanism or by a two-step mechanism involving a protein-DNA covalent intermediate. To determine this chirality, the cleaved DNA is joined to an oligonucleotide by DNA ligase. Given the strict stereochemistry of the DNA ligase reaction, determined here, the original chirality of the phosphorothioate dictates whether the 18O is retained or lost in the ligation product, which can be determined by mass spectrometry. This method has advantages over previous methods in that it is not restricted to particular DNA sequences, requires substantially less material, and avoids purification of the products at intermediate stages in the procedure. The method was validated by confirming that DNA cleavage by the EcoRI restriction endonuclease causes inversion of configuration at the scissile phosphate. It was then applied to the reactions of the SfiI and HpaII endonucleases and the MuA transposase. In all three cases, DNA cleavage proceeded with inversion of configuration, indicating direct hydrolysis of the phosphodiester bond by water as opposed to a reaction involving a covalent enzyme-DNA intermediate.     

DNA sequence recognition by bispyrazinonaphthalimides antitumor agents

Bifunctional DNA intercalating agents have long attracted considerable attention as anticancer agents. One of the lead compounds in this category is the dimeric antitumor drug elinafide, composed of two tricyclic naphthalimide chromophores separated by an aminoalkyl linker chain optimally designed to permit bisintercalation of the drug into DNA. In an effort to optimize the DNA recognition capacity, different series of elinafide analogues have been prepared by extending the surface of the planar drug chromophore which is important for DNA sequence recognition. We report here a detailed investigation of the DNA sequence preference of three tetracyclic monomeric or dimeric pyrazinonaphthalimide derivatives. Melting temperature measurements and surface plasmon resonance (SPR) studies indicate that the dimerization of the tetracyclic planar chromophore considerably augments the affinity of the drug for DNA, polynucleotides, or hairpin oligonucleotides and promotes selective interaction with G.C sites. The (CH(2))(2)NH(CH(2))(3)NH(CH(2))(2) connector stabilizes the drug-DNA complexes. The methylation of the two nitrogen atoms of this linker chain reduces the binding affinity and increases the dissociation rates of the drug-DNA complexes by a factor of 10. DNase I footprinting experiments were used to investigate the sequence selectivity of the drugs, demonstrating highly preferential binding to G.C-rich sequences. It also served to select a high-affinity site encompassing the sequence 5'-GACGGCCAG which was then introduced into a biotin-labeled hairpin oligonucleotide to accurately measure the binding parameters by SPR. The affinity constant of the unmethylated dimer for this sequence is 500 times higher than that of the monomer compound and approximately 10 times higher than that of the methylated dimer. The DNA groove accessibility was also probed with three related oligonucleotides carrying G --> c(7)G, G --> I, and C --> M substitutions. The level of drug binding to the two hairpin oligonucleotides containing 7-deazaguanine (c(7)G) or 5-methylcytosine (M) residues is unchanged or only slightly reduced compared to that of the unmodified target. In contrast, incorporation of inosine (I) residues considerably decreases the extent of drug binding or even abolishes the interaction as is the case with the monomer. The pyrazinonaphthalimide derivatives are thus much more sensitive to the deletion of the exocyclic guanine 2-amino group exposed in the minor groove of the duplex than to the modification of the major groove elements. The complementary SPR footprinting methodology combining site selection and quantitative DNA affinity analysis constitutes a reliable method for dissecting the DNA sequence selectivity profile of reversible DNA binding small molecules.     

DNA base repair – recognition and initiation of catalysis

Endogenous DNA damage induced by hydrolysis, reactive oxygen species and alkylation modifies DNA bases and the structure of the DNA duplex. Numerous mechanisms have evolved to protect cells from these deleterious effects. Base excision repair is the major pathway for removing base lesions. However, several mechanisms of direct base damage reversal, involving enzymes such as transferases, photolyases and oxidative demethylases, are specialized to remove certain types of photoproducts and alkylated bases. Mismatch excision repair corrects for misincorporation of bases by replicative DNA polymerases. The determination of the 3D structure and visualization of DNA repair proteins and their interactions with damaged DNA have considerably aided our understanding of the molecular basis for DNA base lesion repair and genome stability. Here, we review the structural biochemistry of base lesion recognition and initiation of one-step direct reversal (DR) of damage as well as the multistep pathways of base excision repair (BER), nucleotide incision repair (NIR) and mismatch repair (MMR).     

Amino-terminal sequence of the Tn3 transposase protein

The amino-terminal sequence of the Tn3 transposase protein was determined to be Pro-Val-Asp-Phe-Leu-Thr-Thr-Glu-Gln-Val-Glu-Ser.... This was determined both from an active transposase protein purified from a transposase overproducing mutant strain and from a hybrid transposase-beta-galactosidase fusion protein. The amino acid sequence corresponded to the DNA sequence of the transposase gene beginning at an ATG initiation codon, as previously predicted from the analysis of transposase-beta-galactosidase gene fusions.     

DNA sequence recognition by the antitumor drug ditercalinium

The antitumor drug ditercalinium is a rare example of a noncovalent DNA-binding ligand that forms bisintercalation complexes via the major groove of the double helix. Previous structural studies have revealed that the two connected pyridocarbazolium chromophores intercalate into DNA with the positively charged bis(ethylpiperidinium) linking chain oriented to the wide groove side of the helix. Although the interaction of ditercalinium with short oligonucleotides containing 4-6 contiguous GC base pairs has been examined in detail by biophysical and theoretical approaches, the sequence preference for ditercalinium binding to long DNA fragments that offer a wide variety of binding sites has been investigated only superficially. Here we have investigated both sequence preferences and possible molecular determinants of selectivity in the binding of ditercalinium to DNA, primarily using methods based upon DNase I footprinting. A range of multisite DNA substrates, including several natural restriction fragments and different PCR-generated fragments containing unconventional bases (2,6-diaminopurine, inosine, uridine, 5-fluoro- and 5-methylcytosine, 7-deazaguanine, 7-deazaadenine, and N(7)-cyanoboranoguanine), have been employed to show that ditercalinium selectively recognizes certain GC-rich sequences in DNA and to identify some of the factors which affect its DNA-binding sequence selectivity. Specifically, the footprinting data have revealed that the 2-amino group on the purines or the 5-methyl group on the pyrimidines is not essential for the formation of ditercalinium-DNA complexes whereas the major groove-oriented N(7) of guanine does appear as a key element in the molecular recognition process. The loss of N(7) at guanines but not adenines is sufficient to practically abolish sequence-selective binding of ditercalinium to DNA. Thus, as expected for a major groove binding drug, the N(7) of guanine is normally required for effective complex formation with GC base pairs, but interestingly the substitution of the N(7) with a relatively bulky cyanoborane group does not markedly affect the sequence recognition process. Therefore, the hydrogen bond accepting capability at N(7) of guanines is not sufficient to explain the GC-selective drug-DNA association, and the implications of these findings are considered.     

EcoRV restriction endonuclease: communication between DNA recognition and catalysis.

A genetic system was constructed for the mutagenesis of the EcoRV restriction endonuclease and for the overproduction of mutant proteins. The system was used to make two mutants of EcoRV, with Ala in place of either Asn185 or Asn188. In the crystal structure of the EcoRV-DNA complex, both Asn185 and Asn188 contact the DNA within the EcoRV recognition sequence. But neither mutation affected the ability of the protein to bind to DNA. In the absence of metal ion cofactors, the mutants bound DNA with almost the same affinity as that of the wild-type enzyme. In the presence of Mg2+, both mutants retained the ability to cleave DNA specifically at the EcoRV recognition sequence, but their activities were severely depressed relative to that of the wild-type. In contrast, with Mn2+ as the cofactor, the mutant enzymes cleaved the EcoRV recognition site with activities that were close to that of the wild-type. When bound to DNA at the EcoRV recognition site, the mutant proteins bound Mn2+ ions readily, but they had much lower affinities for Mg2+ ions than the wild-type enzyme. This was the reason for their low activities with Mg2+ as the cofactor. The arrangement of the DNA recognition functions, at one location in the EcoRV restriction enzyme, are therefore responsible for organizing the catalytic functions at a separate location in the protein.     

Substrate recognition and induced DNA deformation by transposase at the target-capture stage of Tn10 transposition

The bacterial transposon Tn10 inserts preferentially into sites that conform to a 9 bp consensus sequence: 5' NGCTNAGCN 3'. However, this sequence is not on its own sufficient to confer target specificity as the base-pairs flanking this sequence also contribute significantly to target-site selection. We have performed a series of "contact-probing experiments" to define directly the protein-DNA interactions that govern target-site selection in the Tn10 system. The HisG1 hotspot for Tn10 insertion was the main focus here. We infer that there is a rather broad zone ( approximately 24 bp) of contact between transposase and target DNA in the target-capture complex. This includes base-specific contacts at all of the purine residues in the consensus positions of the target core and primarily backbone contacts out to 7-8 bp in the two flanking regions immediately adjacent to the core. Also, highly localized sites of chemical hypersensitivity are identified that reveal symmetrically disposed deformations in DNA structure in the target-capture complex. Furthermore, the level of strand transfer is shown to be reduced by phosphorothioate substitution of phosphate groups at or close to the sites of target DNA deformation. Interestingly, for one particular target DNA, a mutant form of HisG1 called MutF, the above phosphorothioate inhibition of strand transfer is suppressed by replacing Mg(2+) with Mn(2+). Based on these results a model for sequence-specific target capture is proposed which attempts to define possible relationships between transposase interactions with the target core and flanking sequences, transposase-induced DNA deformation of the target site and divalent metal ion binding to the target-capture complex.     

Instability of transposase activity: Evidence from bacteriophage Mu DNA replication

Transposition of genetic elements involves coupled replication and integration events catalyzed in part by a class of proteins called transposases. We have asked whether the transposase activity of bacteriophage Mu (the Mu A protein) is stable and capable of catalyzing multiple rounds of coupled replication/integration, or whether its continued synthesis is required to maintain Mu DNA replication. Inhibition of protein synthesis during the lytic cycle with chloramphenicol inhibited Mu DNA synthesis with a half-life of approximately 3 min, demonstrating a need for continued protein synthesis to maintain Mu DNA replication. Synthesis of specific Mu-encoded proteins was inhibited by infecting a host carrying a temperature-sensitive suppressor, at permissive temperature, with Mu amber phages, then shifting to nonpermissive temperature. When Aam phages were used, Mu DNA replication was inhibited with kinetics essentially identical to those with chloramphenicol addition; hence, it is likely that continued synthesis of the Mu A protein is required to maintain Mu DNA replication. The data suggest that the activity of the Mu A protein is unstable, and raise the possibility that the Mu A protein and other transposases may be used stoichiometrically rather than catalytically.     

Monovalent cations regulate DNA sequence recognition by 434 repressor

The bacteriophage 434 repressor distinguishes between its six naturally occurring binding sites using indirect readout. In indirect readout, sequence-dependent differences in the structure and flexibility of non-contacted bases in a protein's DNA-binding site modulate the affinity of DNA for protein. The conformation and flexibility of a DNA sequence can be influenced by the interaction of the DNA bases or backbone with solution components. We examined the effect of changing the cation-type present in solution on the stability and structure of 434 repressor complexes with wild-type and mutant OR1 and OR3, binding sites that differ in their contacted and non-contacted base sequences. We find that the affinity of repressor for OR1, but not for OR3, depends remarkably on the type and concentration of monovalent cation. Moreover, the formation of a stable, specific repressor-OR1 complex requires the presence of monovalent cations; however, repressor-OR3 complex formation has no such requirement. Changing monovalent cation type alters the ability of repressor to protect OR1, but not OR3, from *OH radical cleavage. Altering the relative length of the poly(dA) x poly(dT) tract in the non-contacted regions of the OR1 and OR3 can reverse the cation sensitivity of repressor's affinities for these two sites. Taken together these findings show that cation-dependent alterations in DNA structure underlies indirect readout of DNA sequence by 434 repressor and perhaps other proteins.     

DNA sequence recognition by an isopropyl substituted thiazole polyamide

We have used DNA footprinting and fluorescence melting experiments to study the sequence-specific binding of a novel minor groove binding ligand (thiazotropsin A), containing an isopropyl substituted thiazole polyamide, to DNA. In one fragment, which contains every tetranucleotide sequence, sub-micromolar concentrations of the ligand generate a single footprint at the sequence ACTAGT. This sequence preference is confirmed in melting experiments with fluorescently labelled oligonucleotides. Experiments with DNA fragments that contain variants of this sequence suggest that the ligand also binds, with slightly lower affinity, to sequences of the type XCYRGZ, where X is any base except C, and Z is any base except G.     

Raman spectroscopy of uracil DNA glycosylase-DNA complexes: insights into DNA damage recognition and catalysis

Using off-resonance Raman spectroscopy, we have examined each complex along the catalytic pathway of the DNA repair enzyme uracil DNA glycosylase (UDG). The binding of undamaged DNA to UDG results in decreased intensity of the DNA Raman bands, which can be attributed to an increased level of base stacking, with little perturbation in the vibrational modes of the DNA backbone. A specific complex between UDG and duplex DNA containing 2'-beta-fluorodeoxyuridine shows similar increases in the level of DNA base stacking, but also a substrate-directed conformational change in UDG that is not observed with undamaged DNA, consistent with an induced-fit mechanism for damage site recognition. The similar increases in the level of DNA base stacking for the nonspecific and specific complexes suggest a common enzyme-induced distortion in the DNA, potentially DNA bending. The difference spectrum of the extrahelical uracil base in the substrate-analogue complexes reveals only a small electron density reorganization in the uracil ring for the ground state complex, but large 34 cm(-)(1) downshifts in the carbonyl normal modes. Thus, UDG activates the uracil ring in the ground state mainly through H bonds to its C=O groups, without destroying its quasi-aromaticity. This result is at variance with the conclusion from a recent crystal structure, in which the UDG active site significantly distorts the flipped-out pseudouridine analogue such that a change in hybridization at C1 occurs [Parikh, S. S., et al. (2000) Proc. Natl. Acad. Sci. USA 97, 5083]. The Raman vibrational signature of the bound uracil product differs significantly from that of free uracil at neutral pH, and indicates that the uracil is anionic. This is consistent with recent NMR results, which established that the enzyme stabilizes the uracil anion leaving group by 3.4 pK(a) units compared to aqueous solution, contributing significantly to catalysis. These observations are generally not apparent from the high-resolution crystal structures of UDG and its complexes with DNA; thus, Raman spectroscopy can provide unique and valuable insights into the nature of enzyme-DNA interactions.     

Mechanisms of coupling between DNA recognition specificity and catalysis in EcoRI endonuclease

Proteins that bind to specific sites on DNA often do so in order to carry out catalysis or specific protein-protein interaction while bound to the recognition site. Functional specificity is enhanced if this second function is coupled to correct DNA site recognition. To analyze the structural and energetic basis of coupling between recognition and catalysis in EcoRI endonuclease, we have studied stereospecific phosphorothioate (PS) or methylphosphonate (PMe) substitutions at the scissile phosphate GpAATTC or at the adjacent phosphate GApATTC in combination with molecular-dynamics simulations of the catalytic center with bound Mg2+. The results show the roles in catalysis of individual phosphoryl oxygens and of DNA distortion and suggest that a "crosstalk ring" in the complex couples recognition to catalysis and couples the two catalytic sites to each other.     

Movement of DNA sequence recognition domains between non-orthologous proteins

Comparisons of proteins show that they evolve through the movement of domains. However, in many cases, the underlying mechanisms remain unclear. Here, we observed the movements of DNA recognition domains between non-orthologous proteins within a prokaryote genome. Restriction–modification (RM) systems, consisting of a sequence-specific DNA methyltransferase and a restriction enzyme, contribute to maintenance/evolution of genomes/epigenomes. RM systems limit horizontal gene transfer but are themselves mobile. We compared Type III RM systems in Helicobacter pylori genomes and found that target recognition domain (TRD) sequences are mobile, moving between different orthologous groups that occupy unique chromosomal locations. Sequence comparisons suggested that a likely underlying mechanism is movement through homologous recombination of similar DNA sequences that encode amino acid sequence motifs that are conserved among Type III DNA methyltransferases. Consistent with this movement, incongruence was observed between the phylogenetic trees of TRD regions and other regions in proteins. Horizontal acquisition of diverse TRD sequences was suggested by detection of homologs in other Helicobacter species and distantly related bacterial species. One of these RM systems in H. pylori was inactivated by insertion of another RM system that likely transferred from an oral bacterium. TRD movement represents a novel route for diversification of DNA-interacting proteins.