The interaction of hemin with skeletal muscle actin

The ability of actin to interact with hemin was studied. It was found that the Soret absorption band of hemin changes in the presence of actin and that hemin is capable of quenching the fluorescence intensity of actin. These findings were indicative of hemin binding to actin. The binding constant for the high affinity site was calculated to be 5.3 X 10(6) M-1. The amounts of native G- and F-actin were estimated by their DNAase I inhibition activity. It was observed that the binding of hemin to G-actin is followed by a slow decrease in the ability of actin to inhibit DNAase I activity and to polymerize upon addition of salts. Binding of hemin to F-actin resulted in a gradual depolymerization of the filaments, to an inactivated form, as expressed by a reduction in the ability of hemin-bound F-actin to inhibit DNAase I activity in the absence as well as in the presence of guanidine-HCl. Electron microscopy studies further corroborated these findings by demonstrating that: (1) hemin-bound G-actin failed to show formation of polymers when salts were added; (2) a marked reduction in the amount of actin polymers was observed in the specimens examined 24 h after mixing with hemin. It is suggested that the elevated amounts of free hemin formed under pathological conditions, might be toxic to cells by interfering with actin polymerization cycles.     

The interaction of actin monomers with myosin heads and other muscle proteins.

The simplest interacting unit of actomyosin, viz., single myosin heads (subfragment 1) with actin monomers, has been studied at physiological ionic strength, by isolating the actin molecules from each other on a solid support. The interaction is characterized by a binding constant of 10(5) to 10(6) M-1 in the temperature range 4-30degrees C. It is endothermic with a standard enthalpy of 24 +/- 10 kcal mol-1, and a standard entropy of 110 +/- 40 eu. It is thus, like many protein-protein association processes, entropy-driven. Despite the high affinity of the association, which is comparable in its binding constant to that of subfragment 1 with F-actin, there is only very small activation of myosin ATPase. The ionic-strength dependence of the interaction shows unusual features. Binding of the proteins of the relaxing system to the monomeric actin was also examined: troponin binds both in the presence and absence of calcium ions, but neither tropomyosin nor the tropomyosin-troponin complex was found to bind significantly. Monomeric actin has also been examined as a function of ionic strength by spectroscopic methods; it appears that conformational differences between the G and the F state are the consequence of polymerization, and not of the change in ionic strength required to being the conversion about.     

Cross-linking study on skeletal muscle actin: interaction of suberimidate-treated actin with deoxyribonuclease I

We have recently reported that actin modified with dimethyl suberimidate takes a filamentous form even under depolymerizing conditions, and this phenomenon is accounted for by the conformational fixation caused by the introduction of an intramolecular cross-link (Ohara, O., Takahashi, S., Ooi, T., & Fujiyoshi, Y. (1982) J. Biochem. 91, 1999-2012). The suberimidate-treated actin (SA) is not immediately depolymerized by deoxyribonuclease I (DNase I) but is depolymerized after incubation for one day, i.e., depolymerization is much slower than that for intact F-actin. The results on circular dichroic spectra of a mixture of SA and DNase I suggest that DNase I flips the conformation of SA into a G-actin-like state from the F-actin-like one when a tight SA-DNase I complex is formed. The suberimidate cross-link introduced in an SA molecule does not completely prevent the conformational change from the F-state to the G-state but stabilizes the actin conformation very greatly in the F-state.     

On the interaction of bovine seminal RNase with actin in vitro

Ribonuclease from bovine seminal plasma (RNase BS) interacts with skeletal muscle actin in the following way: it binds to actin with an apparent binding constant of 9.2 X 10(4) M-1 in 0.1 M KCl, induces the polymerization of actin below the critical concentration in depolymerization buffer, accelerates the salt-induced polymerization of actin even at a molar ratio of RNase to actin lower than 1/100, and bundles F-actin filaments. In the bundles the molar ratio of RNase to actin is about 0.66. Actin inhibits the enzymatic activity of RNase BS. RNase A from bovine pancreas, which is structurally almost identical to the subunits of RNase BS as well as a monomeric form of RNase BS, do not cross-link actin filaments and have a much smaller effect on the polymerization of actin. We conclude that the dimeric structure of the RNase BS, which consists of two identical subunits cross-linked by interchain disulfide bridges, is probably responsible for the bundling activity and the accelerating effect on the polymerization of actin.     

Differences in the ionic interaction of actin with the motor domains of nonmuscle and muscle myosin II.

Changes in the actin-myosin interface are thought to play an important role in microfilament-linked cellular movements. In this study, we compared the actin binding properties of the motor domain of Dictyostelium discoideum (M765) and rabbit skeletal muscle myosin subfragment-1 (S1). The Dictyostelium motor domain resembles S1(A2) (S1 carrying the A2 light chain) in its interaction with G-actin. Similar to S1(A2), none of the Dictyostelium motor domain constructs induced G-actin polymerization. The affinity of monomeric actin (G-actin) was 20-fold lower for M765 than for S1(A2) but increasing the number of positive charges in the loop 2 region of the D. discoideum motor domain (residues 613-623) resulted in equivalent affinities of G-actin for M765 and for S1. Proteolytic cleavage and cross-linking approaches were used to show that M765, like S1, interacts via the loop 2 region with filamentous actin (F-actin). For both types of myosin, F-actin prevents trypsin cleavage in the loop 2 region and F-actin segment 1-28 can be cross-linked to loop 2 residues by a carbodiimide-induced reaction. In contrast with the S1, loop residues 559-565 of D. discoideum myosin was not cross-linked to F-actin, probably due to the lower number of positive charges. These results confirm the importance of the loop 2 region of myosin for the interaction with both G-actin and F-actin, regardless of the source of myosin. The differences observed in the way in which M765 and S1 interact with actin may be linked to more general differences in the structure of the actomyosin interface of muscle and nonmuscle myosins.     

Equilibrium muscle crossbridge behavior: The interaction of myosin crossbridges with actin

The interaction of myosin crossbridges with actin under equilibrium conditions is reviewed. Similarities and differences between the weakly- and strongly-binding interactions of myosin crossbridges with actin filaments are discussed. A precise, narrow definition of weakly- binding crossbridges is given. It is postulated that the fundamental interaction of crossbridges with actin is that the crossbridge heads are mobile after attachment in the first case but not in the second. It is argued that because the weakly-binding crossbridge heads are mobile after attachment, the heads appear to function independently of each other. The lack of head mobility in attached strongly-binding crossbridges makes the strongly-binding crossbridge heads appear to act cooperatively. This model of the strongly-binding crossbridge gives an explanation for two important and otherwise unexplained observations. It explains why the rate constant of force decay after a small stretch is a sigmoidal function of nucleotide analogue concentration, and why, in the presence of analogues or in rigor, the rate constant of force decay after a small stretch is often significantly slower than the rate constant for myosin subfragment-1 detachment from actin in solution. The model of the weakly-binding crossbridge accurately describes the behavior of the myosin·ATP crossbridge.     

Specific interaction of cytochalasins with muscle and platelet actin filaments in vitro

The cytochalasins (CE, CD, CB and H₂CB) inhibit numerous cellular processes which require the interaction of actin with other structural and contractile proteins. In this report we describe the effects of the cytochalasins on the viscosity and morphology of muscle and platelet actin. The cytochalasins decreased the viscosity of F-actin solutions. The effect of H₂CB, CB and CD on F-actin viscosity was maximal at concentrations of 20–50μM and did not increase with time. In contrast, CE caused a progressive decrease in the viscosity of F-actin solutions which was dependent upon the concentration of CE and the duration of incubation of the CE-actin mixture. After two hours of incubation of drug-actin mixtures, the relative effectiveness of the cytochalasins in reducing the viscosity of F-actin was CE > CD > CB = H₂CB. The effects of CD and CE were paralleled by morphologic changes in negatively stained actin filaments. The effects of the cytochalasins on the viscosity and morphology of muscle and platelet actin were the same whether the drugs were added before or after the polymerization of the protein. These studies show that the interaction of the cytochalasins with actin is highly specific. Because the relative potencies of these drugs for affecting motile processes and the relative affinities of the drugs for binding sites within a variety of cells are CE > CD > CB = H₂CB, the effects of cytochalasins on actin described here may contribute to some of the biological effects of the drugs on motile processes.     

On the interaction between xanthine oxidase and actin

Xanthine oxidase increases the rate of actin polymerization. This occurs at oxidase concentrations as low as 40 nM provided the concentration of the polymerizing agent is low (0.5 mM MgCl2). In the presence of 0.1 M KCl plus 1 mM MgCl2 as the polymerizing agents, xanthine oxidase does not affect the rate of the polymerization but increases significantly the rate of the conversion of F(ATP)actin into F(ADP.Pi)actin and probably also the rate of the orthophosphate release.     

Polyphosphoinositides inhibit the interaction of vinculin with actin filaments.

Binding of vinculin to adhesion plaque proteins is restricted by an intramolecular association of vinculin's head and tail regions. Results of previous work suggest that polyphosphoinositides disrupt this interaction and thereby promote binding of vinculin to both talin and actin. However, data presented here show that phosphatidylinositol 4,5-bisphosphate (PI4,5P2) inhibits the interaction of purified tail domain with F-actin. Upon re-examining the effect of PI4,5P2 on the actin and talin-binding activities of intact vinculin, we find that when the experimental design controls for the effect of magnesium on aggregation of PI4,5P2 micelles, polyphosphoinositides promote interactions with the talin-binding domain, but block interactions of the actin-binding domain. In contrast, if vinculin is trapped in an open confirmation by a peptide specific for the talin-binding domain of vinculin, actin binding is allowed. These results demonstrate that activation of the actin-binding activity of vinculin requires steps other than or in addition to the binding of PI4,5P2.     

Polymerization of Acanthamoeba actin. Kinetics, thermodynamics, and co-polymerization with muscle actin.

The kinetics and thermodynamics for the polymerization of purified Acanthamoeba actin were studied and compared to muscle actin. Polymerization was qualitatively similar for the two actins with a rate-limiting nucleation step followed by rapid polymer extension. Polymerization occurred only above a threshold critical concentration which varied with polymerization conditions for each actin. In the presence of 2 mM MgCl2, nucleation of both actins was rapid and their critical concentrations were similarly low and not detectably dependent on temperature. In 0.1 M KCl, the rates of nucleation of both actins were much slower than when Mg2+ was present and were significantly different from each other. Also, under these conditions, the critical concentrations of Acanthamoeba and muscle actin were significantly different and both varied markedly with temperature. These quantitative differences between the two actins could be attributed to differences in both their enthalpies and entropies of polymerization, Acanthamoeba actin having the more positive deltaH and delta S. Co-polymerization of the two actins was also demonstrated. Overall, however, there were no qualitative differences between Acanthamoeba and muscle actin that would suggest a unique role for the monomer-polymer equilibrium of cytoplasmic actin in cell motility.     

Myosin and actin from ascidian smooth muscle and their interaction

Myosin and actin were purified from ascidian smooth muscle. Ascidian myosin contained two classes of light chains and the pH dependence of Ca2+-activated ATPase and the KCl dependence of actin-activated ATPase of ascidian myosin differed from those of vertebrate skeletal myosin. Troponin-tropomyosin complex from ascidian increased the ATPase activity of ascidian reconstituted actomyosin in a Ca2+-dependent manner. Ascidian myosin provided the reconstituted actomyosin with the responsiveness to calcium ions. Two actin isoforms were present in ascidian, which were distinguished by isoelectric points.     

The interaction of actin with dystrophin

Proton NMR spectroscopy of synthetic peptides corresponding to defined regions of human dystrophin has been employed to study the interaction with F-actin. No evidence of interaction with a C-terminal region corresponding to amino acid residues 3429-3440 was obtained. F-actin restricted the mobility of residues 19-27 in a synthetic peptide corresponding to residues 10-32. This suggests that this is a site of F-actin interaction in the intact dystrophin molecule. Identical sequences to that of residues 19-22 in dystrophin, namely Lys-Thr-Phe-Thr are also present in the N-terminal regions of the alpha-actinins implying this is also a site of F-actin interaction with alpha-actinin.     

Molecular interaction of fenvalarate with actin

The structure of α-Cyano-3-phenoxybenzyl-2-(4-chlorophenyl)-3-methylbutyrate (Fenvalarate) has been established by X-ray crystallography to understand the structure-activity relationship, which is of paramount importance in the toxicological studies of the compound. Fenvalarate is stabilized by intermolecular C-H…O, C-H…Cl, C-H…π and C-H…N interactions which are responsible for the stability of the compound and its interaction with the Actin. The crystallographic coordinates of the compound was extrapolated to docking studies to elucidate the action of fenvalarate against neural cytoskeletal protein of insect and mammalian β-actin. A strong affinity was observed in binding of fenvalarate with insect β-actin (-7.71kcal/mol, Ki = 2.23μM) indicating it as a potent insecticide and moderate toxicity towards mammalian β-actin (-7.07kcal/mol, Ki=6.54μM).     

Tetrahymena actin: copolymerization with skeletal muscle actin and interactions with muscle actin-binding proteins

We have previously shown that actin from Tetrahymena pyriformis has a very divergent primary structure (Hirono, M., Endoh, H., Okada, N., Numata, O., & Watanabe, Y. (1987) J. Mol. Biol. 194, 181-192) and that though it shares essential properties with skeletal muscle actin, it does not interact at all with phalloidin or DNase I (Hirono, M., Kumagai, Y., Numata, O., & Watanabe, Y. (1989) Proc. Natl. Acad. Sci. U.S. 86, 75-79). In this study, we investigated the copolymerization of this actin with skeletal muscle actin by direct observation of the heteropolymers formed from the two actins by means of electron microscopy. We also examined the binding of actin-binding proteins from skeletal muscle or smooth muscle to Tetrahymena actin by means of a cosedimentation assay. The results show that (i) Tetrahymena actin copolymerizes with skeletal muscle actin and that (ii) muscle myosin subfragment 1 binds to it in the absence of ATP, like skeletal muscle actin. However, it was also shown that (iii) muscle alpha-actinin hardly binds to Tetrahymena actin and that (iv) muscle tropomyosin does not bind to it at all. The results show that Tetrahymena actin has both properties similar and dissimilar to those of skeletal muscle actin.     

The interaction of bovine pancreatic deoxyribonuclease I and skeletal muscle actin

The rate of exchange of actin-bound nucleotide is decreased by a factor of about 20 when actin is complexed with DNAase I without affecting the binding constant of calcium for actin. Binding constants of DNAase I to monomeric and filamentous actin were determined to be 5 X 10(8) M-1 and 1.2 X 10(4) M-1 respectively. The depolymerisation of F-actin by DNAase I appears to be due to a shift in the G-F equilibrium of actin by DNAase I. Inhibition of the DNA-degrading activity of DNAase I by G-actin is of the partially competitive type.     

The interaction of cofilin with the actin filament

Cofilin is a key actin-binding protein that is critical for controlling the assembly of actin within the cell. Here, we present the results of molecular docking and dynamics studies using a muscle actin filament and human cofilin I. Guided by extensive mutagenesis results and other biophysical and structural studies, we arrive at a model for cofilin bound to the actin filament. This predicted structure agrees very well with electron microscopy results for cofilin-decorated filaments, provides molecular insight into how the known F- and G-actin sites on cofilin interact with the filament, and also suggests new interaction sites that may play a role in cofilin binding. The resulting atomic-scale model also helps us understand the molecular function and regulation of cofilin and provides testable data for future experimental and simulation work.     

Stimulation of the interaction between actin and myosin by Physarum caldesmon-like protein and smooth muscle caldesmon.

We have purified an actin-binding protein from the plasmodia of a lower eukaryote, Physarum polycephalum, with an apparent molecular mass of 210,000 daltons on sodium dodecyl sulfate-polyacrylamide gel electrophoresis. This protein bound to actin filaments with a stoichiometry of 1:7-8 in a Ca(2+)-calmodulin-dependent manner. Antibody raised against caldesmon from smooth muscle cross-reacted with the 210-kDa protein. In vitro motility assay revealed that the 210-kDa protein increased the sliding velocity of actin filaments on Physarum myosin. The 210-kDa protein more than doubled the actin-activated ATPase activity of Physarum myosin under comparative conditions of in vitro motility assay. Further increases in the concentration of the 210-kDa protein decreased its stimulatory effects. Ca(2+)-calmodulin prevented the stimulatory effects of the 210-kDa protein. Unexpectedly, smooth muscle caldesmon also increased the sliding velocity of actin filaments on smooth muscle myosin at lower concentrations. The well-known inhibitory effect of smooth muscle caldesmon on the actin-myosin interaction was observed with this motility assay when the concentration of the caldesmon was increased further. The stimulatory and inhibitory effects were confirmed by measurements of actin-activated ATPase activity of smooth muscle myosin. From estimations of the intracellular concentrations of the 210-kDa protein and smooth muscle caldesmon in vivo, it appears that effects of the former and the latter on actin-myosin interactions in vivo are stimulatory and inhibitory, respectively.