Effects of mechanical stress on Anammox granules in a sequencing batch reactor (SBR)

The effect of shear stress on Anammox process was studied in a sequencing batch reactor (SBR). The reactor was operated during 218 days under different stirring speeds (60-250 rpm) in order to expose the system to different shear conditions and to study the stability of the Anammox granules referred to their biological activity and size. The nitrogen loading rate (NLR) fed to the SBR was kept around 0.3g N(L day)(-1). The nitrite (limiting substrate) removal percentage was 98% during most of the operational period. The specific Anammox activity of the biomass was practically constant and around 0.4 g N(g VSSday)(-1) and the average feret diameter of the formed granules was 0.64 mm. Obtained results indicated that stirring speeds up to 180 rpm have no negative effect on the performance of the Anammox process, whereas Anammox activity decreased to 40% when a rotating speed of 250 rpm was tested and the average diameter decreased in 45%, the concentration of solids in the effluent increased to 0.2g TSSL(-1) and nitrite was accumulated in the reactor up to 60 mg NL(-1).     

Start-up of the Anammox process in a membrane bioreactor

The start-up of an Anammox process was studied in a membrane sequencing batch reactor (MSBR) in which a submerged hollow fibre membrane module was used to retain the biomass. The reactor was seed with Anammox biomass and fed using the Van de Graaf medium. During a first operating stage, salt precipitation was observed and interfered with microbial activity and caused a decrease of the nitrogen removal rate of the reactor from 100 to only 10 mgl(-1) per day. Salt precipitation was avoided by diminishing adequately the Ca and P concentrations of the Van de Graaf medium during the last operating stage. This action increased quickly the activity of the system, and nitrogen removal rate reached up to 710 mgl(-1) per day with almost full nitrite removal. Sporadic flotation of the sludge was observed in the MSBR. The use of the membrane avoided biomass wash-out from the system. Moreover, a surprising fact was that Anammox biomass did not grow in flocs in the MSBR, but in granules. This fact showed that this kind of microorganisms have a trend to grow in aggregates. Results indicated that the use of the MSBR could be a suitable system for nitrogen removal by using the Anammox reaction.     

Stoichiometric and kinetic characterisation of Nitrosomonas sp. in mixed culture by decoupling the growth and energy generation processes

A novel method that relies on the decoupling of the energy production and biosynthesis processes was used to characterise the maintenance, cell lysis and growth processes of Nitrosomonas sp. A Nitrosomonas culture was enriched in a sequencing batch reactor (SBR) with ammonium as the sole energy source. Fluorescent in situ hybridization (FISH) showed that Nitrosomonas bound to the NEU probe constituted 82% of the bacterial population, while no other known ammonium or nitrite oxidizing bacteria were detected. Batch tests were carried out under conditions that both ammonium and CO2 were in excess, and in the absence of one of these two substrates. The oxygen uptake rate and nitrite production rate were measured during these batch tests. The results obtained from these batch tests, along with the SBR performance data, allowed the determination of the maintenance coefficient and the in situ cell lysis rate, as well as the maximum specific growth rate of the Nitrosomonas culture. It is shown that, during normal growth, the Nitrosomonas culture spends approximately 65% of the energy generated for maintenance. The maintenance coefficient was determined to be 0.14-0.16 mgN mgCOD(biomass)(-1)h(-1), and was shown to be independent of the specific growth rate. The in situ lysis rate and the maximum specific growth rate of the Nitrosomonas culture were determined to be 0.26 and 1.0 day(-1) (0.043 h(-1)), respectively, under aerobic conditions at 30 degrees C and pH 7.     

Settleability and kinetics of a nitrifying sludge in a sequencing batch reactor

A physiological study of a nitrifying sludge was carried out in a sequencing batch reactor (SBR). Pseudo steady-state nitrification conditions were obtained with an ammonium removal efficiency of 99% +/- 1% and 98% +/- 2% conversion of NH4+-N to NO3 - -N. The rate of biomass production was negligible (1.3 +/- 0.1 mg microbial protein-N.L(-1).d(-1)). The sludge presented good settling properties with sludge volume index values lower than 20 mL.g(-1) and an exopolymeric protein/carbohydrate ratio of 0.53 +/- 0.34. Kinetic results indicated that the nitrifying behavior of the sludge changed with the number of cycles. After 22 cycles, a decrease in the specific rate of NO3- -N production coupled with an increase in the NO2- -N accumulation were observed. These results showed that the activity of the nitrite oxidizing bacteria decreased at a longer operation time. Ammonia oxidizing bacteria were found to exhibit the best stability. After 4 months of operation, the specific rates of NH4+-N consumption and NO3- -N production were 1.72 NH4+-N per microbial protein-N per hour (g.g(-1).h(-1)) and 0.54 NO3- -N per microbial protein-N per hour (g.g(-1).h(-1)), respectively.     

Sensitivity analysis of a biofilm model describing a one-stage completely autotrophic nitrogen removal (CANON) process.

A mathematical model for nitrification and anaerobic ammonium oxidation (ANAMMOX) processes in a single biofilm reactor (CANON) was developed. This model describes completely autotrophic conversion of ammonium to dinitrogen gas. Aerobic ammonium and nitrite oxidation were modeled together with ANAMMOX. The sensitivity of kinetic constants and biofilm and process parameters to the process performance was evaluated, and the total effluent concentrations were, in general, found to be insensitive to affinity constants. Increasing the amount of biomass by either increasing biofilm thickness and density or decreasing porosity had no significant influence on the total effluent concentrations, provided that a minimum total biomass was present in the reactor. The ANAMMOX process always occurred in the depth of the biofilm provided that the oxygen concentration was limiting. The optimal dissolved oxygen concentration level at which the maximum nitrogen removal occurred is related to a certain ammonium surface load on the biofilm. An ammonium surface load of 2 g N/m2. d, associated with a dissolved oxygen concentration level of 1.3 g O2/m3 in the bulk liquid and with a minimum biofilm depth of 1 mm seems a proper design condition for the one-stage ammonium removal process. Under this condition, the ammonium removal efficiency is 94% (82% for the total nitrogen removal efficiency) (30 degrees C). Better ammonium removal could be achieved with an increase in the dissolved oxygen concentration level, but this would strongly limit the ANAMMOX process and decrease total nitrogen removal. It can be concluded that a one-stage process is probably not optimal if a good nitrogen effluent is required. A two-stage process like the combined SHARON and ANAMMOX process would be advised for complete nitrogen removal.     

CANON and Anammox in a gas-lift reactor

Anoxic ammonium oxidation (Anammox) and Completely Autotrophic Nitrogen removal Over Nitrite (CANON) are new and promising microbial processes to remove ammonia from wastewaters characterized by a low content of organic materials. These two processes were investigated on their feasibility and performance in a gas-lift reactor. The Anammox as well as the CANON process could be maintained easily in a gas-lift reactor, and very high N-conversion rates were achieved. An N-removal rate of 8.9 kg N (m(3) reactor)(-1) day(-1) was achieved for the Anammox process in a gas-lift reactor. N-removal rates of up to 1.5 kg N (m(3) reactor)(-1) day(-1) were achieved when the CANON process was operated. This removal rate was 20 times higher compared to the removal rates achieved in the laboratory previously. Fluorescence in situ hybridization showed that the biomass consisted of bacteria reacting to NEU, a 16S rRNA targeted probe specific for halotolerant and halophilic Nitrosomonads, and of bacteria reacting to Amx820, specific for planctomycetes capable of Anammox.     

Biological treatment of ammonium-rich wastewater by partial nitritation and subsequent anaerobic ammonium oxidation (anammox) in a pilot plant

In wastewater treatment plants with anaerobic sludge digestion, 15-20% of the nitrogen load is recirculated to the main stream with the return liquors from dewatering. Separate treatment of this ammonium-rich digester supernatant would significantly reduce the nitrogen load of the activated sludge system. Some years ago, a novel biological process was discovered in which ammonium is converted to nitrogen gas under anoxic conditions with nitrite as the electron acceptor (anaerobic ammonium oxidation, anammox). Compared to conventional nitrification and denitrification, the aeration and carbon-source demand is reduced by over 50 and 100%, respectively. The combination of partial nitritation to produce nitrite in a first step and subsequent anaerobic ammonium oxidation in a second reactor was successfully tested on a pilot scale (3.6 m(3)) for over half a year. This report focuses on the feasibility of nitrogen removal from digester effluents from two different wastewater treatment plants (WWTPs) with the combined partial nitritation/anammox process. Nitritation was performed in a continuously stirred tank reactor (V=2.0 m(3)) without sludge retention. Some 58% of the ammonium in the supernatant was converted to nitrite. At 30 degrees C the maximum dilution rate D(x) was 0.85 d(-1), resulting in nitrite production of 0.35 kg NO(2)-N m(-3)(reactor) d(-1). The nitrate production was marginal. The anaerobic ammonium oxidation was carried out in a sequencing batch reactor (SBR, V=1.6 m(3)) with a nitrogen elimination rate of 2.4 kg N m(-3)(reactor) d(-1) during the nitrite-containing periods of the SBR cycle. Over 90% of the inlet nitrogen load to the anammox reactor was removed and the sludge production was negligible. The nitritation efficiency of the first reactor limited the overall maximum rate of nitrogen elimination.     

Modeling a granule‐based anaerobic ammonium oxidizing (ANAMMOX) process

A mathematical model was developed to describe the anaerobic ammonium oxidation (ANAMMOX) process in a granular upflow anaerobic sludge blanket (UASB) reactor. ANAMMOX granules were cultivated in the UASB reactor by seeding aerobic granules. The granule‐based reactor had a great N‐loading resistant capacity. The model simulation results on the 1‐year reactor performance matched the experimental data well. The yield coefficient for the growth and the decay rate coefficient of the ANAMMOX granules were estimated to be 0.164 g COD g^?1 N and 0.00016 h^?1, respectively. With this model, the effects of process parameters on the reactor performance were evaluated. Results showed that the optimum granule diameter for the maximum N‐removal should be between 1.0 and 1.3 mm and that the optimum N loading rate should be 0.8 kg N m^?3 d^?1. In addition, the substrate micro‐profiles in the ANAMMOX granules were measured with a microelectrode to explore the diffusion dynamics within the granules, and the measured profiles matched the predicted results well. Biotechnol. Bioeng. 2009;103: 490–499. © 2009 Wiley Periodicals, Inc.     

Nitrogen removal from aquaculture pond water by heterotrophic nitrogen assimilation in lab-scale sequencing batch reactors

The potential use of sequencing batch reactors (SBRs) as an alternative bio-flocs technology (BFT) approach in aquaculture was explored. One SBR was dosed with glycerol and one with acetate for the decrease of the nitrogen concentration in simulated aquaculture water by microbial assimilation. At an optimal C/N ratio between 10 and 15, the nitrogen removal efficiency reached up to 98% (=110 mg N L(-1) reactor day(-1)) for both SBRs. The estimated biomass productivity reached 0.62-0.94 g C L(-1)r eactor day(-1) for the glycerol SBR and 0.54-0.82 g C L(-1) reactor day(-1) for the acetate SBR. The floc protein content, indicating biomass quality, reached up to 57% if grown on glycerol. With acetate, it attained a value of 61%. The highest average poly-beta-hydroxybutyrate (PHB) content was 16% on a dry weight basis for the acetate biomass.     

Variable aeration in sequencing batch reactor with aerobic granular sludge

This study investigated the effects of reduced aeration in famine period on the performance of sequencing batch reactor (SBR) with aerobic granular sludge. Aerobic granules were first cultivated in two SBRs (R1 and R2) with acetate as sole carbon source. From operation day 27, aeration rate in R1 was reduced from 1.66 to 0.55 cm s(-1) from 110 min to the end of each cycle and further reduced from 30 min to the end of each cycle from day 63. R2 as a control was operated with a constant aeration rate of 1.66 cm s(-1) in the whole cycle during the entire experimental period. Results showed that changing trends of SVI, concentration, average size and VSS/SS of biomass with time in R1 and R2 were similar although different aeration modes were adopted. At steady state, SVI of aerobic granules and biomass concentration maintained at about 40 ml g(-1) and 6 g l(-1), respectively. Average size of granules was about 750 microm in R1 while 550 microm in R2. This is the first study to demonstrate that aerobic granular sludge could be stable at reduced aeration rate in famine period during more than 3-month operation. Such an operation strategy with reduced aeration rate will lead to a significant reduction of energy consumption, which makes the aerobic granular sludge technology more competitive over conventional activated sludge process. Furthermore, the stability of aerobic granular system with variable aeration further indicates that the difference of physiology and kinetics of aerobic granule in feast and famine periods results in the different requirements of oxygen and shear stress for the stability of granules, which will deepen the understanding of mechanism of aerobic granulation in sequencing batch reactor.     

Free nitrous acid selectively inhibits and eliminates nitrite oxidizers from nitrifying sequencing batch reactor

In a complete nitrification sequencing batch reactor (CNSBR), where ammonium containing wastewater (200–1,000 mg N/L) is completely oxidized to nitrate up to 2.4 kg NH₄ ⁺–N/m³ d, both ammonia oxidizers and nitrite oxidizers were enriched in the sludge granules. Quantitative fluorescence in situ hybridization analyses of the sludge granules of the CNSBR showed that ammonia oxidizers and nitrite oxidizers occupied 31 and 4.2% of total bacteria, respectively. Most of the nitrite oxidizers were Nitrobacter species (95% of the nitrite oxidizers) and the remainder was Nitrospira species. The population of nitrite oxidizers was significantly higher than that of partial nitrification SBR (PNSBR) where most of the ammonium was oxidized to nitrite. The PNSBR had 37% (ammonia oxidizers) and 0.4% (nitrite oxidizers) of total bacteria. Comparative study with CNSBR and PNSBR revealed that free nitrous acid, rather than free ammonia, played a critical inhibition role to wash out nitrite oxidizers from the reactor. The concentrations of free ammonia and nitrite as well as free nitrous acid in the CNSBR selected Nitrobacter as the dominant nitrite oxidizers rather than Nitrospira.     

Modeling the partial nitrification in sequencing batch reactor for biomass adapted to high ammonia concentrations

Partial nitrification has proven to be an economic way for treatment of industrial N-rich effluent, reducing oxygen and external COD requirements during nitrification/denitrification process. One of the key issues of this system is the intermediate nitrite accumulation stability. This work presents a control strategy and a modeling tool for maintaining nitrite build-up. Partial nitrification process has been carried out in a sequencing batch reactor at 30 degrees C, maintaining strong changing ammonia concentration in the reactor (sequencing feed). Stable nitrite accumulation has been obtained with the help of an on-line oxygen uptake rate (OUR)-based control system, with removal rate of 2 kg NH4 (+)-N x m(-3)/day and 90%-95% of conversion of ammonium into nitrite. A mathematical model, identified through the occurring biological reactions, is proposed to optimize the process (preventing nitrate production). Most of the kinetic parameters have been estimated from specific respirometric tests on biomass and validated on pilot-scale experiments of one-cycle duration. Comparison of dynamic data at different pH confirms that NH3 and NO2- should be considered as the true substrate of nitritation and nitratation, respectively. The proposed model represents major features: the inhibition of ammonia-oxidizing bacteria by its substrate (NH3) and product (HNO2), the inhibition of nitrite-oxidizing bacteria by free ammonia (NH3), the INFluence of pH. It appears that the model correctly describes the short-term dynamics of nitrogenous compounds in SBR, when both ammonia oxidizers and nitrite oxidizers are present and active in the reactor. The model proposed represents a useful tool for process design and optimization.     

Microbial adaptation to biodegradation of tert-butyl alcohol in a sequencing batch reactor

This study demonstrates the utility of the sequencing batch reactor (SBR) to adapt microorganisms towards biological removal of tert-butyl alcohol (TBA). The reactor was inoculated with activated sludge and fed with TBA as the sole carbon source. Start-of-cycle TBA concentrations were initially set at 100 mgL(-1) with a cycle time of 24 h and a volumetric exchange ratio of 50% to maintain a TBA loading rate of not more than 100 mgL(-1)d(-1). Step increases in TBA loading rates up to 600 mgL(-1)d(-1) were achieved by first raising the start-of-cycle TBA concentration to 150 mgL(-1) on day 90 and subsequently by reducing the cycle time from 24 to 12, 8 and 6h on days 100, 121 and 199, respectively. This acclimation strategy favored the retention of increasingly higher densities of well-adapted microbial populations in the reactor. The increases in TBA loading produced better settling biomass and higher biomass concentrations with higher specific TBA biodegradation rates. Effluent TBA concentrations were consistently below the detection limit of 25 microgL(-1). The use of progressively shorter cycle times created selection pressures that fostered the self-immobilization of the reactor microorganisms into aerobic granules which first appeared on day 125. Specific TBA biodegradation rates in the granules followed the Haldane model for substrate inhibition, and peaked at 13.8 mgTBAgVSS(-1)h(-1) at a TBA concentration of 300 mgL(-1). Denaturing gradient gel electrophoresis (DGGE) analysis of PCR-amplified 16S rRNA genes from granules sampled between days 220 and 247 confirmed the existence of a highly stable microbial community with members belonging to the alpha, beta and delta subdivisions of Proteobacteria and the Cytophaga-Flavobacteria-Bacteroides (CFB) group.     

Inulin enrichment by fermentation in a flocculating yeast reactor

Summary Simultaneous production of ethanol and fructose enriched syrups was obtained from Jerusalem artichoke extract using a Saccharomyces diastaticus flocculating yeast in a continuous gas-lift reactor with internal biomass recycle. This allowed the production of 42 g/L of ethanol and 70 g/L of inulin containing up to 92% fructose (fructose/glucose ratio of 11). These results can be compared to the batch and chemostat fermentations which gave a higher ethanol concentration but a lower fructose enrichment. Mass transfert limitations can explain both the productivity decrease and the selectivity improvement in the gas-lift reactor.     

厌氧氨氧化工艺的应用现状和问题

厌氧氨氧化(Anaerobic ammonium oxidation,ANAMMOX)工艺因其高效低耗的优势,在废水生物脱氮领域具有广阔的应用前景。在过去的20年中,许多基于ANAMMOX反应的工艺得以不断研究和应用。预计到2014年末,全球范围内的ANAMMOX工程将会超过100座。综述了各种形式的ANAMMOX工艺,包括短程硝化-厌氧氨氧化、全程自养脱氮、限氧自养硝化反硝化、反硝化氨氧化、好氧反氨化、同步短程硝化-厌氧氨氧化-反硝化耦合、单级厌氧氨氧化短程硝化脱氮工艺。对一体式和分体式工艺运行条件进行了比较,结合ANAMMOX工艺工程(主要包括移动床生物膜,颗粒污泥和序批式反应器系统)应用现状,总结了工程化应用过程中遇到的问题及其解决对策,在此基础上对今后的研究和应用方向进行了展望。今后的研究重点应集中于运行条件的优化和水质障碍因子的解决,尤其是工艺自动化控制系统的开发和特殊废水对工艺性能影响的研究。     

Inactivation of ANAMMOX communities under concurrent operation of anaerobic ammonium oxidation (ANAMMOX) and denitrification

A concurrent operation of anaerobic ammonium oxidation (ANAMMOX) and denitrification was investigated in a well known UASB reactor seeding with both ANAMMOX and anaerobic granular sludges. ANAMMOX activity was confirmed by hydroxylamine test and the hybridization of biomass using the gene probes of Amx 820 and EUB 338 mixed. Denitrification was observed through the reductions of both COD and nitrate-nitrite concentrations under anaerobic/anoxic conditions. By providing a stoichiometric ratio of nitrite to ammonium nitrogen with addition nitrate nitrogen, a gradual reduction of ANAMMOX activity was found with an increase of COD concentration in a range of 100-400 mg l(-1). This is equivalent to the COD to N ratio of 0.9-2.0. The COD concentration was found to be a control variable for process selection between ANAMMOX reaction and denitrification. A reduction of COD and nitrite-nitrate concentrations in all reactors confirmed the undergone concurrent denitrification which thrives when sufficient organic matter is available. COD concentration over 300 mg l(-1) was found to inactivate or eradicate ANAMMOX communities.     

Key Physiology of Anaerobic Ammonium Oxidation

The physiology of anaerobic ammonium oxidizing (anammox) aggregates grown in a sequencing batch reactor was investigated quantitatively. The physiological pH and temperature ranges were 6.7 to 8.3 and 20 to 43°C, respectively. The affinity constants for the substrates ammonium and nitrite were each less than 0.1 mg of nitrogen per liter. The anammox process was completely inhibited by nitrite concentrations higher than 0.1 g of nitrogen per liter. Addition of trace amounts of either of the anammox intermediates (1.4 mg of nitrogen per liter of hydrazine or 0.7 mg of nitrogen per liter of hydroxylamine) restored activity completely.     

Key physiology of anaerobic ammonium oxidation.

The physiology of anaerobic ammonium oxidizing (anammox) aggregates grown in a sequencing batch reactor was investigated quantitatively. The physiological pH and temperature ranges were 6.7 to 8.3 and 20 to 43 degrees C, respectively. The affinity constants for the substrates ammonium and nitrite were each less than 0.1 mg of nitrogen per liter. The anammox process was completely inhibited by nitrite concentrations higher than 0.1 g of nitrogen per liter. Addition of trace amounts of either of the anammox intermediates (1. 4 mg of nitrogen per liter of hydrazine or 0.7 mg of nitrogen per liter of hydroxylamine) restored activity completely.     

Simulation of wastewater treatment by aerobic granules in a sequencing batch reactor based on cellular automata

In the present paper, aerobic granules were developed in a sequencing batch reactor (SBR) using synthetic wastewater, and 81 % of granular rate was obtained after 15-day cultivation. Aerobic granules have a 96 % BOD removal to the wastewater, and the reactor harbors a mount of biomass including bacteria, fungi and protozoa. In view of the complexity of kinetic behaviors of sludge and biological mechanisms of the granular SBR, a cellular automata model was established to simulate the process of wastewater treatment. The results indicate that the model not only visualized the complex adsorption and degradation process of aerobic granules, but also well described the BOD removal of wastewater and microbial growth in the reactor. Thus, CA model is suitable for simulation of synthetic wastewater treatment. This is the first report about dynamical and visual simulation of treatment process of synthetic wastewater in a granular SBR.