Electrochemical DNA biosensor based on silver nanoparticles/poly(3-(3-pyridyl) acrylic acid)/carbon nanotubes modified electrode

In this work, we present an electrochemical DNA sensor based on silver nanoparticles/poly(trans-3-(3-pyridyl) acrylic acid) (PPAA)/multiwalled carbon nanotubes with carboxyl groups (MWCNTs-COOH) modified glassy carbon electrode (GCE). The polymer film was electropolymerized onto MWCNTs-COOH modified electrode by cyclic voltammetry (CV), and then silver nanoparticles were electrodeposited on the surface of PPAA/MWCNTs-COOH composite film. Thiol group end single-stranded DNA (HS-ssDNA) probe was easily covalently linked onto the surface of silver nanoparticles through a 5′ thiol linker. The DNA hybridization events were monitored based on the signal of the intercalated adriamycin by differential pulse voltammetry (DPV). Based on the response of adriamycin, only the complementary oligonucleotides gave an obvious current signal compared with the three-base mismatched and noncomplementary oligonucleotides. Under the optimal conditions, the increase of reduction peak current of adriamycin was linear with the logarithm of the concentration of the complementary oligonucleotides from 9.0 × 10⁻¹² to 9.0 × 10⁻⁹ M with a detection limit of 3.2 × 10⁻¹² M. In addition, this DNA sensor exhibited an excellent reproducibility and stability during DNA hybridization assay.     

Immobilization and hybridization of DNA in a sugar polyacrylate hydrogel

Using a non-contact microarrayer, amine-terminated probe oligonucleotides representing 20-, 50-, and 70-mer fragments of the fliC gene were covalently coupled into three-dimensional regions in a "sugar polyacrylate" hydrogel based on poly(6-acryloyl-beta-O-methyl galactopyranoside-co-aminopropyl methacrylamide). The arrayer deposited the solution containing ssDNA probes in discrete regions on the surface of the gel (i.e. as a droplet with a ca. 450 microm diameter), allowing penetration and attachment of the ss DNA within the three dimensional region of the gel. The attachment was mediated by the homobifunctional crosslinker bis-succinimidyl suberate. Confocal microscopy showed the density of attached probe DNA was greatest in the interior-most regions of the gel volume. Target ssDNA (20- and 70-mer) was able to diffuse through the gel and undergo successful hybridization with the probes. For target ssDNA in the concentration range 0.19 microM to 6.0 microM, there was a linear correlation between DNA concentration and the fluorescence of the gel region where hybridization occurred.     

Enhancement of a hybridization analysis efficiency by the controlled DNA fragmentation

The influence of a DNA amplicon fragmentation on the efficiency of detecting a specific sequence by heterophase hybridization analysis was investigated. The nucleotide sequence was detected colorimetrically after biotinylation of an oligonucleotide probe immobilized on a solid carrier via limited elongation in complex with the sample DNA with the use of Taq polymerase. Two simple and reproducible techniques of amplicon fragmentation were proposed. The techniques are based on the introduction of apurinic/apyrimidinic sites in DNA and their subsequent thermal degradation. DNA was depurinated by a mild acidic treatment. Apyrimidinic sites were generated by treating a DNA fragment containing dUMP in place of some dTMP in various proportions with uracil-DNA glycosylase (UDG). The DNA sample treated by either method proved to be suitable for hybridization analysis with Taq polymerase without additional purification. The efficiency of hybridization analysis was higher with the fragmented than with the native DNA amplicon. DNA fragmentation makes it possible to use bridged oligonucleotides, having a lower hybridization ability, as highly selective hybridization probes.     

Cu@Au alloy nanoparticle as oligonucleotides labels for electrochemical stripping detection of DNA hybridization

Synthesis of the novel Cu@Au alloy nanoparticle and its application in an electrochemical DNA hybridization detection assay is described in this article. We report a low-temperature method for generating core-shell particles consisting of a core of Cu and a thin layer of Au shell that can be readily functionalized with oligonucleotides. Core-shell Cu@Au particles were successfully labeled to a 5'-alkanethiol capped oligonucleotides probe that is related to the colitoxin gene. The DNA genetic sensing assay relies on the electrostatic adsorption of target oligonucleotides onto conducting polypyrrole (PPy) surface at the glassy carbon electrode (GCE), and its hybridization to the alloy particle-oligonucleotides DNA probe. Hybridization events between probe and target were monitored by the release of the copper metal atoms anchored on the hybrids by oxidative metal dissolution and the indirectly determination of the solubilized Cu2+ ions by sensitive anodic stripping voltammetry (ASV). The detection limit is 5.0 pmol l(-1) of target oligonucleotides. The Cu@Au core-shell nanoparticles combining the surface modification properties of Au with the good electrochemical activity of Cu core shows their perspective application in the electrochemical DNA hybridization analysis assay.     

Amperometric glucose biosensor based on layer-by-layer covalent attachment of AMWNTs and IO(4)(-)-oxidized GOx

Multi-wall carbon nanotubes (MWNTs) functionalized with amino groups were prepared via silane treatment using 3-aminopropyltrimethoxysilane (APS) as a silane-coupling agent. The resultant amino terminated MWNTs (AMWNTs) were applied to construct glucose biosensors with IO(4)(-)-oxidized glucose oxidase (IO(4)(-)-oxidized GOx) through the layer-by-layer (LBL) covalent self-assembly method without any cross-linker. Scanning electron microscopy (SEM) indicated that the assembled AMWNTs were almost in a form of small bundles or single nanotubes, and the surface density increased uniformly with the number of GOx/AMWNTs bilayers. From the analysis of voltammetric signals, a linear increment of the coverage of GOx per bilayer was estimated. The resulting biosensor showed excellent catalytic activity towards the electroreduction of dissolved oxygen at low overvoltage, based on which glucose concentration was monitored conveniently. The enzyme electrode exhibited good electrocatalytic response towards the glucose and that response increased with the number of GOx/AMWNTs bilayers, suggesting that the analytical performance such as sensitivity and detection limit of the glucose biosensors could be tuned to the desired level by adjusting the number of deposited GOx/AMWNTs bilayers. The biosensor constructed with four bilayers of GOx/AMWNTs showed high sensitivity of 7.46muAmM(-1)cm(-2) and the detection limit of 8.0muM, with a fast response less than 10s. Because of relative low applied potential, the interference from other electro-oxidizable compounds was minimized, which improved the selectivity of the biosensors. Furthermore, the obtained enzyme electrodes also showed remarkable stability due to the covalent interaction between the GOx and AMWNTs.     

Introduction of hematoxylin as an electroactive label for DNA biosensors and its employment in detection of target DNA sequence and single-base mismatch in human papilloma virus corresponding to oligonucleotide

For the detection of DNA hybridization, a new electrochemical biosensor was developed on the basis of the interaction of hematoxylin with 20-mer deoxyoligonucleotides (from human papilloma virus, HPV). The study was performed based on the interaction of hematoxylin with an alkanethiol DNA probe self-assembled gold electrode (ss-DNA/AuE) and its hybridization form (ds-DNA/AuE). The optimum conditions were found for the immobilization of HPV probe on the gold electrode (AuE) surface and its hybridization with the target DNA. Electrochemical detection of the self-assembled DNA and the hybridization process were performed by cyclic voltammetry (CV) and differential pulse voltammetry (DPV) over the potential range where the accumulated hematoxylin at the modified electrode was electroactive. Observing a remarkable difference between the voltammetric signals of the hematoxylin obtained from different hybridization samples (non-complementary, mismatch and complementary DNAs), we confirmed the potential of the developed biosensor in detecting and discriminating the target complementary DNA from non-complementary and mismatch oligonucleotides. Under optimum conditions, the electrochemical signal had a linear relationship with the concentration of the target DNA ranging from 12.5 nM to 350.0 nM, and the detection limit was 3.8 nM.     

Label-free and homogeneous DNA hybridization detection using gold nanoparticles-based chemiluiminescence system

We find that the catalytic activity of gold nanoparticles (GNPs) on luminol-H₂O₂ chemiluminescence (CL) system is greatly enhanced after it is aggregated by 0.5 M NaCl. We use this observation to design a CL detection of DNA hybridization. It is based on that the single- and double-stranded oligonucleotides have different propensities to adsorb on GNPs in colloidal solution, and the hybridization occurred between the probe DNA and target DNA can result in aggregation of the GNPs, producing strong CL emission. In the assay, no covalent functionalization of the GNPs, the probe, or the target DNA is required. The assay, including hybridization and detection, occurs in homogenous solution. The detection limit of target DNA (3σ) was estimated to be as low as 1.1 fM. The sensitivity was increased more than 6 orders of magnitude over that of GNPs-based colorimetric method. The present CL method for DNA hybridization detection offers the advantages of being simple, cheap, rapid and sensitive.     

A new method of preparing fiber-optic DNA biosensor and its array for gene detection

A new method of preparing fiber-optic DNA biosensor and its array for the simultaneous detection of multiple genes is described. The optical fibers were first treated with poly-l-lysine, and then were made into fiber-optic DNA biosensors by adsorbing and immobilizing the oligonucleotide probe on its end. By assembling the fiber-optic DNA biosensors in a bundle in which each fiber carried a different DNA probe, the fiber-optic DNA biosensor array was well prepared. Hybridization of fluorescent- labeled cDNA of p53 gene, N-ras gene and Rb1 gene to the DNA array was monitored by CCD camera. A good result was achieved.     

DNA生物传感器在环境污染监测中的应用

基于生物催化和免疫原理的生物传感器在环境领域中获得了广泛应用.近年来,随着分子生物学和生物技术的发展,人们开发了以核酸探针为识别元件,基于核酸相互作用原理的DNA生物传感器.该传感器可用于受感染微生物的核酸序列分析、优先控制污染物的检测以及污染物与DNA之间相互作用的研究,在环境污染监测中具有潜在的巨大应用前景.简要介绍了核酸杂交生物传感器的基本原理及其在环境微生物和优先控制污染物（priority pollutant）检测中的应用研究进展.     

DNA fingerprints of farm animals generated by microsatellite and minisatellite DNA probes

A multi-locus DNA probe, R18.1, derived from a bovine genomic library, detected DNA fingerprints of highly polymorphic loci in hybridization to genomic DNA from poultry and sheep, and of moderate polymorphic loci in cattle and human DNA. The average numbers of detected bands in chickens and sheep were 27.8 and 21.4, and the average band sharing levels were 0.25 and 0.33, respectively. In hybridization to cattle and human DNA, the results were less polymorphic; nevertheless, individual identification is feasible using probe R18.1. The results obtained by R18.1 were compared to results obtained by Jeffreys minisatellite probe 33.6 and two microsatellite oligonucleotides, (GT)12 and (GTG)5. The total number of detected loci using probes R18.1 and 33.6 were estimated in chickens through family analysis of broilers and the maximal number of detectable loci was calculated.     

Time-resolved detection probe for homogeneous nucleic acid analyses in one-step format

We report here an extension of homogeneous assays based on fluorescence intensity and lifetime measuring on DNA hybridization. A novel decay probe that allows simple one-step nucleic acid detection with subnanomolar sensitivity, and is suitable for closed-tube applications, is introduced. The decay probe uses fluorescence resonance energy transfer (FRET) between a europium chelate donor and an organic fluorophore acceptor. The substantial change in the acceptor emission decay time on hybridization with the target sequence allows the direct separation of the hybridized and unhybridized probe populations in a time-resolved measurement. No additional sample manipulation or self-hybridization of the probes is required. The wavelength and decay time of a decay probe can be adjusted according to the selection of probe length and acceptor fluorophore, thereby making the probes applicable to multiplexed assays. Here we demonstrate the decay probe principle and decay probe-based, one-step, dual DNA assay using celiac disease-related target oligonucleotides (single-nucleotide polymorphisms [SNPs]) as model analytes. Decay probes showed specific response for their complementary DNA target and allowed good signal deconvolution based on simultaneous optical and temporal filtering. This technique potentially could be used to further increase the number of simultaneously detected DNA targets in a simple one-step homogeneous assay.     

A new method of preparing fiber-optic DNA biosensor and its array for gene detection

A new method of preparing fiber-optic DNA biosensor and its array for the simultaneous detection of multiple genes is described. The optical fibers were first treated with poly-1-lysine, and then were made into fiber-optic DNA biosensors by adsorbing and immobilizing the oligonucleotide probe on its end. By assembling the fiber-optic DNA biosensors in a bundle in which each fiber carried a different DNA probe, the fiber-optic DNA biosensor array was well prepared. Hybridization of fluorescent- labeled cDNA ofp53 gene,N-ras gene andRb1 gene to the DNA array was monitored by CCD camera. A good result was achieved.     

Bienzyme system for the biocatalyzed deposition of polyaniline templated by multiwalled carbon nanotubes: a biosensor design

A novel method based on covalent attachment of two enzymes, glucose oxidase (GOD) and horseradish peroxide (HRP), onto carboxylic-derived multiwalled carbon nanotubes (MWNTs) for the deposition of electroactive polyaniline (PANI) under ambient conditions is described. Ultraviolet-visible spectroscopy, Fourier-transform infrared (FTIR) spectroscopy, and transmission electron microscopy were used to characterize the assembling of bienzyme and the morphology of PANI|MWNTs. Under the bienzyme biocatalytic condition, a head-to-tail structure of PANI templated by MWNTs was formed. The voltammetric characteristics of the resulting biosensor were investigated by cyclic voltammetry in the presence of glucose. The current response of PANI was linearly related to glucose concentration between 0.05 and 12.0mM with a correlation coefficient of 0.994. The synergistic performance of bienzyme, highly efficient polymerization, and templated deposition provide a general platform for the synthesis of nanowires and nanocircuits, the construction of bioelectronic devices, and the design of novel biosensors.     

纳米粒子标记DNA 探针在电化学DNA 生物传感器中的应用

介绍了纳米电化学DNA生物传感器的基本概念和分类,并介绍了用于DNA标记的纳米粒子的六种类型及其三大检测方法,在此基础上对纳米电化学DNA生物传感器在基因检测、疾病诊断、DNA检测等方面的最新进展进行了综述与讨论。     

Optimization of DNA immobilization on gold electrodes for label-free detection by electrochemical impedance spectroscopy

The ability to immobilize DNA probes onto gold substrates at an optimum surface density is key in the development of a wide range of DNA biosensors. We present a method to accurately control probe DNA surface density by the simultaneous co-immobilization of thiol modified probes and mercaptohexanol. Probe surface density is controlled by the thiol molar ratio in solution, with a linear relationship between thiol molar ratio and probe density spanning (1-9) x10(12)/cm2. The probe surface density per microscopic surface area was determined using chronocoulometry, and a detailed analysis of the method presented. Using this sample preparation method, the effect of probe density and hybridization on the charge transfer resistance with the negatively charged ferri/ferrocyanide redox couple was determined. Above a threshold probe surface density of 2.5 x 10(12)/cm2, electrostatic repulsion from the negatively charged DNA modulates the charge transfer resistance, allowing hybridization to be detected. Below the threshold density no change in charge transfer resistance with probe density or with hybridization occurs. The probe surface density was optimized to obtain the maximum percentage change in charge transfer resistance with hybridization.     

Label‐free indicator‐free nucleic acid biosensors using carbon nanotubes

Carbon nanotubes (CNTs) are promising components for electrical biosensors due to their high surface‐to‐volume ratio and improved electron transfer properties. This review surveys CNT‐based label‐free indicator‐free biosensing strategies that have been demonstrated for the sensitive detection of nucleic acids. After an introduction to CNTs, the fabrication of biosensors and techniques for the immobilization of probe nucleic acids are outlined. Subsequently, two major label‐free strategies namely electrochemical transduction and field‐effect detection are presented. The focus is on direct detection methods that avoid labels, indicators, intercalating agents, mediators, and even secondary receptors. The review concludes with a comparison between the various biosensors and presents ways of engineering them so that they can be deployed in realistic diagnostic applications.     

Hybridization of glass-tethered oligonucleotide probes to target strands preannealed with labeled auxiliary oligonucleotides

In this article we introduce a strategy of preanncaling labeled auxiliary oligonucleotides to single-stranded target DNA, prior to hybridization of the DNA target to oligonucleotide arrays (genosensors) formed on glass slides for the purpose of mutation analysis. Human genomic DNA samples from normal individuals and cystic fibrosis (CF) patients (including homozygous δF508 and heterozygous δF508/wild type (wt) in the region examined) were used. A PCR fragment of length 138 bp (wt) or 135 bp (mutant) was produced from exon l0 in the cystic fibrosis transmembrane conductance regulator (CFTR) gene, using a new pair of polymerase chain reaction (PCR) primers. This fragment contains four of the most frequent mutation sites causing the disease (Q493X, δI507, δF508, and V520F). Each of these mutations was tested using a pair of nonamer (9-mer) probes covalently attached to glass slides, representing the normal (wt) and the mutant allcles. Single-stranded target DNA was isolated from the PCR fragment using one PCR primer labeled with biotin and a streptavidin minicolumn to capture the biotin-labeled strand. Prior to hybridization to the 9-mer array on a glass slide, the unlabeled target strand was preannealed with one, three, or four auxiliary oligonucleotides, at least one being labeled with³²P. As observed previously in several laboratories, the discrimination between normal (wt) and mutant alleles at each site using oligonucleotide array hybridization ranged from very good to poor, depending on the number and location of mismatches between probe and target. Terminal mismatches along the probe were difficult to discriminate, internal mismatches were more easily discriminated, and multiple mismatches were very well discriminated. An exceptionally intense hybridization signal was obtained with a 9-mer probe that hybridized contiguously (in tandem) with one auxiliary oligonucleotide preannealed to the target DNA. The increased stability is apparently caused by strong base slacking interactions between the “capture probe” and the auxiliary oligonucleotide. The presence of the δF508 mutation was delected with this system, including discrimination between homozygous and heterozygous conditions. Base mismatch discrimination using the arrayed 9-mcr probes was improved by increasing the temperature of hybridization from 15 to 25‡C. Auxiliary oligonucleotides, preannealed to the single-stranded template, may serve several purposes to enable a more robust genosensor-based DNA sequence analysis:

Application of synthetic oligonucleotides to the diagnosis of human genetic diseases

Under appropriate conditions synthetic oligonucleotide hybridization probes display essentially absolute hybridization specificity. That is, every nucleotide must form a Watson-Crick base pair in order that the probe forms a stable duplex. All of the non-Watson-Crick base pairs, including G-T, have a destabilizing effect. Thus, it is possible to choose stringent conditions of hybridization such that, while a perfectly matched duplex between an oligonucleotide and complementary DNA will form, duplexes mismatched at one or more position will not. Mutations in a single base in the DNA sequence of a gene can and do result in genetic diseases. The hybridization of oligonucleotides to the region of DNA containing these base changes would be affected by the mutations and thus, oligonucleotide hybridization provides a means of detecting single base changes. In an attempt to develop a non-radioactive method for the detection of human genetic diseases, we have prepared biotinylated-oligonucleotides by an enzymatic method. An oligonucleotide probe (23-mer) containing a single biotinylated deoxyuridine residue at the 3'-terminus was prepared by a primer extention reaction using E. coli DNA polymerase I (Klenow fragment). The probe could be specifically and tightly bound with Avidin D in 1 M NaCl. It could be hybridized to a plasmid DNA containing a perfectly matched complementary sequence, but not to a DNA containing 5 non-consecutive non-complementary bases. The hybridized biotinylated probe could be visualized by Avidin D and biotinylated alkaline phosphatase, even when 1.8 ng of the plasmid DNA (0.5 fmol) was used. A general approach to the enzymatic synthesis of oligonucleotides containing a single biotinylated deoxyuridine at the 3' end is described.     

Oligonucleotide derivatives in the hybridization analysis of nucleic acids. I. Covalent immobilization of oligonucleotide probes on nylon

The characteristics of the UV-induced immobilization of oligonucleotides on nylon membranes and the efficiency of the enzymatic labeling of immobilized probes in heterophase identifying specific DNA sequences were studied. Oligonucleotides bound to short terminal oligothymidylates (up to 10 nt) through a flexible linker based on diethylene glycol phosphodiester are proposed as probes for immobilization on nylon. The presence of this fragment allows one to enhance the immobilization efficiency and reduce the UV-dependent degradation of the sequence-specific part of the probe by decreasing the irradiation dose needed for DNA immobilization. The optimal dose of UV irradiation is evaluated to be ∼0.4 J/cm² at 254 nm, which provides a high level of the hybridization signal for immobilized probes of various nucleotide sequences. It was found that nylon amide groups play a key role in the photoinduced fixation of oligonucleotides to the polymer surface, while its primary amino groups were not as responsible for the covalent binding of DNA as previously thought. Various additives in the membrane wetting solution were demonstrated to influence both the efficiency of the UV-induced immobilization and the functional integrity of immobilized probes. Other radical generating systems alternative to UV irradiation are shown to provide the immobilization of oligonucleotides on nylon membranes.     

Fabrication of bienzyme nanobiocomposite electrode using functionalized carbon nanotubes for biosensing applications

Mediated biosensors consisting of an oxidase and peroxidase (POx) have attracted increasing attention because of their wider applicability. This work presents a novel approach to fabricate nanobiocomposite bienzymatic biosensor based on functionalized multiwalled carbon nanotubes (MWNTs) with the aim of evaluating their ability as sensing elements in amperometric transducers. Electrochemical behavior of the bienzymatic nanobiocomposite biosensor is investigated by Faradaic impedance spectroscopy and cyclic voltammetry. The results indicate that glucose oxidase (GOD) and horseradish peroxidase (HRP) are strongly adsorbed on the surface of the thionin (TH) functionalized MWNTs and demonstrate a facile electron transfer between immobilized GOD/HRP and the electrode via the functionalized MWNTs in a Nafion film. The functionalized carbon nanotubes act as molecular wires to allow efficient electron transfer between the underlying electrode and the redox centres of enzymes through TH. Linear ranges for these electrodes are from 10 nM to 10 mM for glucose and 17 nM to 56 mM for hydrogen peroxide with the detection limit of 3 and 6 nM, respectively. A remarkable feature of the bienzyme electrode is the possibility to determine glucose and hydrogen peroxide at a very low applied potential where the noise level and interferences from other electroactive compounds are minimal. Performance of the biosensor is evaluated with respect to response time, detection limit, selectivity, temperature and pH as well as operating and storage stability.