Thiol compounds inhibit the formation of amyloid fibrils by beta 2-microglobulin at neutral pH

Dialysis-related amyloidosis frequently develops in patients undergoing long-term hemodialysis, in which the major component of fibrils is β₂-microglobulin (β2-m). To prevent the disease, it is important to stop the formation of fibrils. β2-m has one disulfide bond, which stabilizes the native structure, and amyloid fibrils. Here, the effects of reductants (i.e., dithiothreitol and cysteine) on the formation of β2-m amyloid fibrils were examined at neutral pH. Fibrils were generated by three methods: seed-dependent, ultrasonication-induced, and salt-and-heat-induced fibrillation. Thioflavin T fluorescence, electron microscopy, and far-UV circular dichroism revealed that the addition of reductants significantly inhibits seed-dependent and ultrasonication-induced fibrillation. For salt-and-heat-induced fibrillation, where the solution of β2-m was strongly agitated, formation of amyloid fibrils was markedly reduced in the presence of reductants, although a small number of fibrils formed even after the reduction of the disulfide bond. The results suggest that reductants such as cysteine and dithiothreitol would be useful for preventing the formation of β2-m amyloid fibrils under physiological conditions.     

Kinetically controlled thermal response of beta2-microglobulin amyloid fibrils

Calorimetric measurements were carried out using a differential scanning calorimeter in the temperature range from 10 to 120 degrees C for characterizing the thermal response of beta2-microglobulin amyloid fibrils. The thermograms of amyloid fibril solution showed a remarkably large decrease in heat capacity that was essentially released upon the thermal unfolding of the fibrils, in which the magnitude of negative heat capacity change was not explicable in terms of the current accessible surface area model of protein structural thermodynamics. The heat capacity-temperature curve of amyloid fibrils prior to the fibril unfolding exhibited an unusual dependence on the fibril concentration and the heating rate. Particularly, the heat needed to induce the thermal response was found to be linearly dependent on the heating rate, indicating that its thermal response is under a kinetic control and precluding the interpretation in terms of equilibrium thermodynamics. Furthermore, amyloid fibrils of amyloid beta peptides also exhibited a heating rate-dependent exothermic process before the fibril unfolding, indicating that the kinetically controlled thermal response may be a common phenomenon to amyloid fibrils. We suggest that the heating rate-dependent negative change in heat capacity is coupled to the association of amyloid fibrils with characteristic hydration pattern.     

Seeding-dependent propagation and maturation of beta2-microglobulin amyloid fibrils under high pressure

High hydrostatic pressure reversibly transforms the amyloid fibrils of beta2-microglobulin (beta2-m) into a more tightly packed, reorganized structure, which has provided insight into the polymorphic properties of amyloid fibrils. Here, to further investigate the molecular mechanism that controls fibril structure, seed-dependent fibril growth from an acid-unfolded monomeric form under high pressure was studied. At all pressures up to 400 MPa, the fibril growth could be approximated by a single-exponential kinetics, although pressure above 300 MPa decreased the growth rate significantly. The fibrils formed at high pressure were similar to the reorganized fibrils formed initially at ambient pressure and then pressurized, suggesting that the reorganized fibrils were formed directly at high pressure. A systematic investigation of the extension rate under various pressures indicated that the activation free energies for the original and reorganized fibrils are significantly different, suggesting that different amino acid contacts are involved in these two types of fibrils. On the other hand, for the seed-dependent extension reactions of both types of fibrils, the activation volume was much smaller than the change in reaction volume, implying that only small numbers of side-chain interactions are achieved in the transition state. Importantly, we observed a marked acceleration of fibril growth, i.e., maturation, on repeated self-seeding above 300 MPa, revealing the coexistence of another type of fibril with a similar structure but with an increased growth-rate under high pressure.     

Topological investigation of amyloid fibrils obtained from beta2-microglobulin

Amyloid fibrils of patients treated with regular hemodialysis essentially consists of beta2-microglobulin (beta2-m) and its truncated species DeltaN6beta2-m lacking six residues at the amino terminus. The truncated fragment has a more flexible three-dimensional structure and constitutes an excellent candidate for the analysis of a protein in the amyloidogenic conformation. The surface topology of synthetic fibrils obtained from intact beta2-m and truncated DeltaN6beta2-m was investigated by the limited proteolysis/mass spectrometry approach that appeared particularly suited to gain insights into the structure of beta2-m within the fibrillar polymer. The distribution of prefential proteolytic sites observed in both fibrils revealed that the central region of the protein, which had been easily cleaved in the full-length globular beta2-m, was fully protected in the fibrillar form. In addition, the amino- and carboxy-terminal regions of beta2-m became exposed to the solvent in the fibrils, whereas they were masked completely in the native protein. These data indicate that beta2-m molecules in the fibrils consist of an unaccessible core comprising residues 20-87 with the strands I and VIII being not constrained in the fibrillar polymer and exposed to the proteases. Moreover, proteolytic cleavages observed in vitro at Lys 6 and Lys 19 reproduce specific cleavages that have to occur in vivo to generate the truncated forms of beta2-m occurring in natural fibrils. On the basis of these data, a possible mechanism for fibril formation from native beta2-m is discussed and an explanation for the occurrence of truncated protein species in natural fibrils is given.     

Core and heterogeneity of beta2-microglobulin amyloid fibrils as revealed by H/D exchange

Dialysis-related amyloidosis, which occurs in the patients receiving a long-term hemodialysis with high frequency, accompanies the deposition of amyloid fibrils composed of beta(2)-microglobulin (beta2-m). In vitro, beta2-m forms two kinds of fibrous structures at acidic pH. One is a rigid "mature fibril", and the other is a flexible thin filament often called an "immature fibril". In addition, a 22-residue peptide (K3 peptide) corresponding to Ser20 to Lys41 of intact beta2-m forms rigid amyloid-like fibrils similar to mature fibrils. We compared the core of these three fibrils at single-residue resolution using a recently developed hydrogen/deuterium (H/D) exchange method with the dissolution of fibrils by dimethylsulfoxide (DMSO). The exchange time-course of these fibrils showed large deviations from a single exponential curve showing that, because of the supramolecular structures, the same residue exists in different environments from molecule to molecule, even in a single fibril. The exchange profiles revealed that the core of the immature fibril is restricted to a narrow region compared to that of the mature fibril. In contrast, all residues were protected from exchange in the K3 fibril, indicating that a whole region of the peptide is engaged in the beta-sheet network. These results suggest the mechanism of amyloid fibril formation, in which the core beta-sheet formed by a minimal sequence propagates to form a rigid and extensive beta-sheet network.     

Seeding-dependent maturation of beta2-microglobulin amyloid fibrils at neutral pH

Beta2-microglobulin (beta2-m) is a major component of amyloid fibrils deposited in patients with dialysis-related amyloidosis. Recent studies have focused on the mechanism by which amyloid fibrils are formed under physiological conditions, which had been difficult to reproduce quantitatively. Yamamoto et al. (Yamamoto, S., Hasegawa, K., Yamaguchi, I., Tsutsumi, S., Kardos, J., Goto, Y., Gejyo, F. & Naiki, H. (2004) Biochemistry 43, 11075-11082) showed that a combination of seed fibrils prepared under acidic conditions and a low concentration of sodium dodecyl sulfate below its critical micelle concentration enabled extensive fibril formation at pH 7.0. Here, we found that repeated self-seeding at pH 7.0 with fibrils formed at the same pH causes a marked acceleration of growth, indicating the maturation of fibrils. The observed maturation can be simulated by assuming the existence of two types of fibrils with different growth rates. Importantly, some mutations of beta2-m or the addition of a low concentration of urea, both destabilizing the native conformation, were not enough to extend the fibrils at pH 7.0, and a low concentration of sodium dodecyl sulfate (i.e. 0.5 mM) was essential. Thus, even though the first stage fibrils in patients are unstable and require stabilizing factors to remain at neutral pH, they can adapt to a neutral pH with repeated self-seeding, implying a mechanism of development of amyloid deposition after a long latent period in patients.     

A systematic investigation into the effect of protein destabilisation on beta 2-microglobulin amyloid formation

Beta-2-microglobulin (beta(2)m) has been shown to form amyloid fibrils with distinct morphologies under acidic conditions in vitro. Short, curved fibrils (<600 nm in length), form rapidly without a lag phase, with a maximum rate at pH 3.5. By contrast, fibrils with a long (approximately 1 microm), straight morphology are produced by incubation of the protein at pH< or =3.0. Both fibril types display Congo red birefringence, bind Thioflavin-T and have X-ray fibre diffraction patterns consistent with a cross-beta structure. In order to investigate the role of different partially folded states in generating fibrils of each type, and to probe the effect of protein stability on amyloid formation, we have undertaken a detailed mutagenesis study of beta(2)m. Thirteen variants containing point mutations in different regions of the native protein were created and their structure, stability and fibril forming propensities were investigated as a function of pH. By altering the stability of the native protein in this manner, we show that whilst destabilisation of the native state is important in the generation of amyloid fibrils, population of specific denatured states is a pre-requisite for amyloid formation from this protein. Moreover, we demonstrate that the formation of fibrils with different morphologies in vitro correlates with the relative population of different precursor states.     

Role of the C-terminal 28 residues of beta2-microglobulin in amyloid fibril formation

Beta2microglobulin (beta2m) is the major protein component of the fibrillar amyloid deposits isolated from patients diagnosed with dialysis-related amyloidosis (DRA). While investigating the molecular mechanism of amyloid fibril formation by beta2m, we found that the beta2m C-terminal peptide of 28 residues (cbeta2m) itself forms amyloid fibrils. When viewed by electron microscopy, cbeta2m aggregates appear as elongated unbranched fibers, the morphology typical for amyloids. Cbeta2m fibers stain with Congo red and show apple-green birefringence in polarized light, characteristic of amyloids. The observation that the beta2m C-terminal fragment readily forms amyloid fibrils implies that beta2m amyloid fibril formation proceeds via interactions of amyloid forming segments, which become exposed when the beta2m subunit is partially unfolded.     

Structure of interacting segments in the growing amyloid fibril of beta2-microglobulin probed with IR spectroscopy

Inter-segmental interaction at the growing tip of the amyloid fibril of beta2-microglobulin (beta2m) was investigated using IR microscopy. Cross-seeded fibril formation was implemented, in which the amyloid fibril of the #21-31 fragment of beta2m (fA[#21-31]) was generated on the beta2m amyloid fibril (fA[beta2m]) as a seed. Differences between the IR spectra of the cross-seeded fibril and those of the seed were attributed to the contribution from the tip, whose structure is discussed. The results indicated that 6.5 +/- 1.0 out of 11 residues of the fA[#21-31] tip on fA[beta2m] are contained in a beta-sheet at pH 2.5, which was smaller than the corresponding value (7.5 +/- 1.1 residues) of the spontaneous fA[#21-31] at pH 2.5. The tip was suggested to have a planar structure, indicating the planarity of the interacting segment. The N-terminal region of fA[#21-31] in the fibril is more exposed to the solvent than that in the tip, and vice versa for the C-terminal region. This is consistent with the different protonation levels of these regions, and the direction of peptide in the fibrils is determined from these results.     

Competing pathways determine fibril morphology in the self-assembly of beta2-microglobulin into amyloid

Despite its importance in biological phenomena, a comprehensive understanding of the mechanism of amyloid formation remains elusive. Here, we use atomic force microscopy to map the formation of beta2-microglobulin amyloid fibrils with distinct morphologies and persistence lengths, when protein concentration, pH and ionic strength are varied. Using the resulting state-diagrams, we demonstrate the existence of two distinct competitive pathways of assembly, which define an energy landscape that rationalises the sensitivity of fibril morphology on the solution conditions. Importantly, we show that semi-flexible (worm-like) fibrils, which form rapidly during assembly, are kinetically trapped species, formed via a non-nucleated pathway that is explicitly distinct from that leading to the formation of the relatively rigid long-straight fibrils classically associated with amyloid. These semi-flexible fibrils also share an antibody epitope common to other protein oligomers that are known to be toxic species linked to human disease. The results demonstrate the heterogeneity of amyloid assembly, and have important implications for our understanding of the importance of oligomeric states in amyloid disease, the origins of prion strains, and the development of therapeutic strategies.     

Hierarchical assembly of beta2-microglobulin amyloid in vitro revealed by atomic force microscopy

The kinetics of spontaneous assembly of amyloid fibrils of wild-type beta(2)-microglobulin (beta(2)M) in vitro, under acid conditions (pH 2.5) and low ionic strength, has been followed using thioflavin-T (ThT) binding. In parallel experiments, the morphology of the different fibrillar species present at different time-points during the growth process were characterised using tapping-mode atomic force microscopy (TM-AFM) in air and negative stain electron microscopy (EM). The thioflavin-T assay shows a characteristic lag phase during which the nucleation of fibrils occurs before a rapid growth in fibril density. The volume of fibrils deposited on mica measured from TM-AFM images at each time-point correlates well with the fluorescence data. TM-AFM and negative-stain EM revealed the presence of various kinds of protein aggregates in the lag phase that disappear concomitantly with a rise in the density of amyloid fibrils, suggesting that these aggregates precede fibril growth and may act as nucleation sites. Three distinct morphologies of mature amyloid fibrils were observed within a single growth experiment, as observed previously for the wild-type protein and the variant N17D. Additional supercoiled morphologies of the lower-order fibrils were observed. Comparative height analysis from the TM-AFM data allows each of the mature fibril types and single protofilaments to be identified unambiguously, and reveals that the assembly occurs via a hierarchy of morphological states.     

The solution structure of human beta2-microglobulin reveals the prodromes of its amyloid transition

The solution structure of human beta2-microglobulin (beta2-m), the nonpolymorphic component of class I major histocompatibility complex (MHC-I), was determined by (1)H NMR spectroscopy and restrained modeling calculations. Compared to previous structural data obtained from the NMR secondary structure of the isolated protein and the crystal structure of MHC-I, in which the protein is associated to the heavy-chain component, several differences are observed. The most important rearrangements were observed for (1) strands V and VI (loss of the C-terminal and N-terminal end, respectively), (2) interstrand loop V-VI, and (3) strand I, including the N-terminal segment (displacement outward of the molecular core). These modifications can be considered as the prodromes of the amyloid transition. Solvation of the protected regions in MHC-I decreases the tertiary packing by breaking the contiguity of the surface hydrophobic patches at the interface with heavy chain and the nearby region at the surface charge cluster of the C-terminal segment. As a result, the molecule is placed in a state in which even minor charge and solvation changes in response to pH or ionic-strength variations can easily compromise the hydrophobic/hydrophilic balance and trigger the transition into a partially unfolded intermediate that starts with unpairing of strand I and leads to polymerization and precipitation into fibrils or amorphous aggregates. The same mechanism accounts for the partial unfolding and fiber formation subsequent to Cu(2+) binding, which is shown to occur primarily at His 31 and involve partially also His 13, the next available His residue along the partial unfolding pathway.     

A systematic study of the effect of physiological factors on beta2-microglobulin amyloid formation at neutral pH

Beta(2)-microglobulin (beta(2)m) forms amyloid fibrils that deposit in the musculo-skeletal system in patients undergoing long-term hemodialysis. How beta(2)m self-assembles in vivo is not understood, since the monomeric wild-type protein is incapable of forming fibrils in isolation in vitro at neutral pH, while elongation of fibril-seeds made from recombinant protein has only been achieved at low pH or at neutral pH in the presence of detergents or cosolvents. Here we describe a systematic study of the effect of 11 physiologically relevant factors on beta(2)m fibrillogenesis at pH 7.0 without denaturants. By comparing the results obtained for the wild-type protein with those of two variants (DeltaN6 and V37A), the role of protein stability in fibrillogenesis is explored. We show that DeltaN6 forms low yields of amyloid-like fibrils at pH 7.0 in the absence of seeds, suggesting that this species could initiate fibrillogenesis in vivo. By contrast, high yields of amyloid-like fibrils are observed for all proteins when assembly is seeded with fibril-seeds formed from recombinant protein at pH 2.5 stabilized by the addition of heparin, serum amyloid P component (SAP), apolipoprotein E (apoE), uremic serum, or synovial fluid. The results suggest that the conditions within the synovium facilitate fibrillogenesis of beta(2)m and show that different physiological factors may act synergistically to promote fibril formation. By comparing the behavior of wild-type beta(2)m with that of DeltaN6 and V37A, we show that the physiologically relevant factors enhance fibrillogenesis by stabilizing fibril-seeds, thereby allowing fibril extension by rare assembly competent species formed by local unfolding of native monomers.     

Molecular dynamics simulations and free energy analyses on the dimer formation of an amyloidogenic heptapeptide from human beta2-microglobulin: implication for the protofibril structure

Amyloid formation is associated with many neurodegenerative diseases. Recent findings suggest that early oligomeric aggregates could be major sources of toxicity. We present a computational investigation of the first step of amyloid initiation-dimer formation of a seven residue peptide (NHVTLSQ) from human beta2-microglobulin at pH 2.0, which renders +2.0 units charges to each peptide. A total of over 1.2 micros of simulations with explicit solvent and 1.0 micros of simulations with implicit solvent were conducted. Main-chain conformational restraint was applied to facilitate the formation of ordered dimers. An antiparallel beta-sheet with six main-chain hydrogen bonds was dominant in the implicit solvent simulations. In contrast, no stable dimers were observed in the two negative controls, the mouse heptapeptide (KHDSMAE, +3.0 units charges) and the scrambled human heptapeptide (QVLHTSN). Explicit solvent simulations presented a more complex scenario. The wild-type human heptapeptide formed predominantly antiparallel beta-sheets ( approximately 38%) although parallel ones ( approximately 12%) were also observed. Hydrophobic contacts preceded hydrogen bond saturation in the majority of the association events in the explicit solvent simulations, highlighting the important role of hydrophobic interaction in amyloid initiation. The fact that the mouse dimer dissociated immediately after the removal of conformational restraint suggests that the higher conformational entropy barrier, along with the stronger charge repulsion and weaker hydrophobic interaction, contributed to its inability to form amyloid fibril. The closeness of positive charge pairs in the dimers of the scrambled human heptapeptide may prohibit further beta-sheet extension and fibril growth. Combining the results from simulations and free energy analyses, we propose that the building block for this amyloid fibril is an antiparallel dimer with a two-residue register shift and six main-chain hydrogen bonds. A double-layer protofibril structure is also proposed in which two antiparallel beta-sheets face each other and are held together by hydrophobic staples and hydrogen bonds of the polar side-chains.     

beta2-microglobulin H31Y variant 3D structure highlights the protein natural propensity towards intermolecular aggregation

beta2-Microglobulin (beta2m) is the non-covalently bound light chain of the human class I major histocompatibility complex (MHC-I). The natural turnover of MHC-I gives rise to the release of beta2m into plasmatic fluids and to its catabolism in the kidney. beta2m dissociation from the heavy chain of the complex is a severe complication in patients receiving prolonged hemodialysis. As a consequence of renal failure, the increasing beta2m concentrations can lead to deposition of the protein as amyloid fibrils. Here we characterize the His31-->Tyr human beta2m mutant, a non-natural form of beta2m that is more stable than the wild-type protein, displaying a ten-fold acceleration of the slow phase of folding. We report the 2.9A resolution crystal structure and the NMR characterization of the mutant beta2m, focussing on selected structural features and on the molecular packing observed in the crystals. Juxtaposition of the four mutant beta2m molecules contained in the crystal asymmetric unit, and specific hydrogen bonds, stabilize a compact protein assembly. Conformational heterogeneity of the four independent molecules, some of their mutual interactions and partial unpairing of the N-terminal beta-strand in one protomer are in keeping with the amyloidogenic properties displayed by the mutant beta2m.     

Pathways and intermediates of amyloid fibril formation

The lack of understanding of amyloid fibril formation at the molecular level is a major obstacle in devising strategies to interfere with the pathologies linked to peptide or protein aggregation. In particular, little is known on the role of intermediates and fibril elongation pathways as well as their dependence on the intrinsic tendency of a polypeptide chain to self-assembly by β-sheet formation (β-aggregation propensity). Here, coarse-grained simulations of an amphipathic polypeptide show that a decrease in the β-aggregation propensity results in a larger heterogeneity of elongation pathways, despite the essentially identical structure of the final fibril. Protofibrillar intermediates that are thinner, shorter and less structured than the final fibril accumulate along some of these pathways. Moreover, the templated formation of an additional protofilament on the lateral surface of a protofibril is sometimes observed as a collective transition. Conversely, for a polypeptide model with a high β-aggregation propensity, elongation proceeds without protofibrillar intermediates. Therefore, changes in intrinsic β-aggregation propensity modulate the relative accessibility of parallel routes of aggregation.     

Cu(II) organizes beta-2-microglobulin oligomers but is released upon amyloid formation

beta-2-Microglobulin (beta2m) is deposited as amyloid fibrils in the bones and joints of patients undergoing long-term dialysis treatment as a result of kidney failure. Previous work has shown that biologically relevant amounts of Cu(II) can cause beta2m to be converted to amyloid fibrils under physiological conditions in vitro. In this work, dynamic light scattering, mass spectrometry, and size-exclusion chromatography are used to characterize the role that Cu plays in the formation of oligomeric intermediates that precede fibril formation. Cu(II) is found to be necessary for the stability of the dimer and an initial form of the tetramer. The initially formed tetramer then undergoes a structural change to a state that no longer binds Cu(II) before progressing to a hexameric state. Based on these results, we propose that the lag phase associated with beta2m fibril formation is partially accounted for by the structural transition of the tetramer that results in Cu(II) loss. Consistent with this observation is the determination that the mature beta2m amyloid fibrils do not contain Cu. Thus, Cu(II) appears to play a catalytic role by enabling the organization of the necessary oligomeric intermediates that precede beta2m amyloid formation.     

Lysine 58-cleaved beta2-microglobulin is not detectable by 2D electrophoresis in ex vivo amyloid fibrils of two patients affected by dialysis-related amyloidosis

The lysine 58 cleaved and truncated variant of beta(2)-microglobulin (DeltaK58-beta2m) is conformationally unstable and present in the circulation of a large percentage of patients on chronic hemodialysis, suggesting that it could play a role in the beta2-microglobulin (beta2m) amyloid fibrillogenesis associated with dialysis-related amyloidosis (DRA). However, it has yet to be detected in the amyloid deposits of such patients. Here, we extracted amyloid fibrils, without denaturation or additional purification, from different amyloidotic tissues of two unrelated individuals suffering from DRA, and characterized them by high-sensitivity bidimensional gel electrophoresis (2D-PAGE), immunoblotting, MALDI time-of-flight mass spectrometry, and protein sequencing. To confirm whether or not this species could be identified by our proteomic approaches, we mapped its location in 2D-PAGE, in mixtures of pure DeltaK58-beta2m, and extracts of amyloid fibrils from patients, to a discrete region of the gel distinct from other isoforms of beta2m. Using this approach, the two known principal isoforms found in beta2m amyloid were identified, namely, the full-length protein and the truncated species lacking six N-terminal amino acid residues (DeltaN6-beta2m). In contrast, we found no evidence for the presence of DeltaK58-beta2m.     

Strong acids induce amyloid fibril formation of β2-microglobulin via an anion-binding mechanism

Amyloid fibrils, crystal-like fibrillar aggregates of proteins associated with various amyloidoses, have the potential to propagate via a prion-like mechanism. Among known methodologies to dissolve preformed amyloid fibrils, acid treatment has been used with the expectation that the acids will degrade amyloid fibrils similar to acid inactivation of protein functions. Contrary to our expectation, treatment with strong acids, such as HCl or H₂SO₄, of β₂-microglobulin (β2m) or insulin actually promoted amyloid fibril formation, proportionally to the concentration of acid used. A similar promotion was observed at pH 2.0 upon the addition of salts, such as NaCl or Na₂SO₄. Although trichloroacetic acid, another strong acid, promoted amyloid fibril formation of β2m, formic acid, a weak acid, did not, suggesting the dominant role of anions in promoting fibril formation of this protein. Comparison of the effects of acids and salts confirmed the critical role of anions, indicating that strong acids likely induce amyloid fibril formation via an anion-binding mechanism. The results suggest that although the addition of strong acids decreases pH, it is not useful for degrading amyloid fibrils, but rather induces or stabilizes amyloid fibrils via an anion-binding mechanism.     

Sodium louroyl sarcosinate (sarkosyl) modulate amyloid fibril formation in hen egg white lysozyme (HEWL) at alkaline pH: a molecular insight study

Amyloid fibril formation is responsible for several neurodegenerative diseases and are formed when native proteins misfold and stick together with different interactive forces. In the present study, we have determined the mode of interaction of the anionic surfactant sarkosyl with hen egg white lysozyme (HEWL) [EC No. 3.2.1.17] at two pHs (9.0 and 13.0) and investigated its impact on fibrillogenesis. Our data suggested that sarkosyl is promoting amyloid fibril formation in HEWL at the concentration range between 0.9 and 3.0 mM and no amyloid fibril formation was observed in the concentration range of 3.0–20.0 mM at pH 9.0. The results were confirmed by several biophysical and computational techniques, such as turbidity measurement, dynamic light scattering, Raleigh scattering, ThT fluorescence, intrinsic fluorescence, far-UV CD and atomic force microscopy. Sarkosyl was unable to induce aggregation in HEWL at pH 13.0 as confirmed by turbidity and RLS measurements. HEWL forms larger amyloid fibrils in the presence of 1.6 mM of sarkosyl. The spectroscopic, microscopic and molecular docking data suggest that the negatively charged carboxylate group and 12-carbon hydrophobic tail of sarkosyl stimulate amyloid fibril formation in HEWL via electrostatic and hydrophobic interaction. This study leads to new insight into the process of suppression of fibrillogenesis in HEWL which can be prevented by designing ligands that can retard the electrostatic and hydrophobic interaction between sarkosyl and HEWL.