Solution structures and characterization of human immunodeficiency virus Rev responsive element IIB RNA targeting zinc finger proteins

The Rev responsive element (RRE), a part of unspliced human immunodeficiency virus (HIV) RNA, serves a crucial role in the production of infectious HIV virions. The viral protein Rev binds to RRE and facilitates transport of mRNA to the cytoplasm. Inhibition of the Rev-RRE interaction disrupts the viral life cycle. Using a phage display protocol, dual zinc finger proteins (ZNFs) were generated that bind specifically to RREIIB at the high affinity Rev binding site. These proteins were further shortened and simplified, and they still retained their RNA binding affinity. The solution structures of ZNF29 and a mutant, ZNF29G29R, have been determined by nuclear magnetic resonance (NMR) spectroscopy. Both proteins form C(2)H(2)-type zinc fingers with essentially identical structures. RNA protein interactions were evaluated quantitatively by isothermal titration calorimetry, which revealed dissociation constants (K(d)'s) in the nanomolar range. The interaction with the RNA is dependent upon the zinc finger structure; in the presence of EDTA, RNA binding is abolished. For both proteins, RNA binding is mediated by the alpha-helical portion of the zinc fingers and target the bulge region of RREIIB-TR. However, ZNF29G29R exhibits significantly stronger binding to the RNA target than ZNF29; this illustrates that the binding of the zinc finger scaffold is amenable to further improvements.     

Peptide-triggered conformational switch in HIV-1 RRE RNA complexes

We have used NMR spectroscopy to determine the solution structure of a complex between an oligonucleotide derived from stem IIB of the Rev responsive element (RRE-IIB) of HIV-1 mRNA and an in vivo selected, high affinity binding Arg-rich peptide. The peptide binds in a partially alpha-helical conformation into a pocket within the RNA deep groove. Comparison with the structure of a complex between an alpha-helical Rev peptide and RRE-IIB reveals that the sequence of the bound peptide determines the local conformation of the RRE peptide binding site. A conformational switch of an unpaired uridine base was revealed; this points out into the solvent in the Rev peptide complex, but it is stabilized inside the RNA deep groove by stacking with an Arg side chain in the selected peptide complex. The conformational switch has been visualized by NMR chemical shift mapping of the uridine H5/H6 atoms during a competition experiment in which Rev peptide was displaced from RRE-IIB by the higher affinity binding selected peptide.     

Construction of HIV Rev peptides containing peptide nucleic acid that bind HIV RRE IIB RNA

Peptides containing peptide nucleic acid (PNA) have been designed and synthesized to construct molecules recognizing a bulge or a loop structure of RNA. Such peptides were here designed from the HIV Rev protein that can bind the stem-loop IIB of the Rev responsive element (RRE) RNA. Variations of PNA modulated the binding affinities of the peptides to RRE IIB RNA.     

Stereospecificity of short Rev-derived peptide interactions with RRE IIB RNA

The essential HIV-1 regulatory protein Rev binds to the Rev responsive element (RRE) of the HIV-1 mRNA. A short alpha-helical peptide derived from Rev (Rev 34-50) and a truncated form of the RRE sequence (RRE IIB) provide a useful in vitro system to study the interactions between Rev and RRE. The current studies focus on evaluating the specificity of the binding interactions between Rev 34-50 and RRE IIB. The binding of L- and D-Rev peptides to natural and enantiomeric RRE IIB RNA was studied by fluorescence spectroscopy. D-Rev and L-Rev peptides bind to RRE IIB with similar affinities. CD measurements are consistent with a nonhelical, probably beta-hairpin, conformation for D-Rev in the complex. The binding affinities of D/L Rev peptides to L-RRE IIB RNA are also similar to those with natural D-RRE IIB. Furthermore, the conformations of L- and D-peptides when bound to L-RRE are reciprocal to the conformations of these peptides in complex with D-RRE. RNA footprinting studies show that L- and D-Rev peptides bind to the same site on RRE IIB. Our results demonstrate lack of stereospecificity in RRE RNA-Rev peptide interactions. However, it is quite possible that the interactions between full-length Rev protein and RRE are highly specific.     

Evaluation of mismatch-binding ligands as inhibitors for Rev-RRE interaction

Drugs targeting the stem-loop IIB of Rev responsible element (RRE) of HIV-1 mRNA are potential therapeutic agents for HIV-1 infection. The stem loop is characterized by an internal loop consist of consecutive G-G and G-A mismatches, which is the single binding site for Rev protein for nuclear export of viral mRNA. We report here that ligands binding to G-G and G-A mismatches in duplex DNA also bind to the internal loop in competition with Rev peptide and lead to the dissociation of pre-formed Rev-RRE complex in a model system.     

Proflavine acts as a Rev inhibitor by targeting the high-affinity Rev binding site of the Rev responsive element of HIV-1

Rev is an essential regulatory HIV-1 protein that binds the Rev responsive element (RRE) within the env gene of the HIV-1 RNA genome, activating the switch between viral latency and active viral replication. Previously, we have shown that selective incorporation of the fluorescent probe 2-aminopurine (2-AP) into a truncated form of the RRE sequence (RRE-IIB) allowed the binding of an arginine-rich peptide derived from Rev and aminoglycosides to be characterized directly by fluorescence methods. Using these fluorescence and nuclear magnetic resonance (NMR) methods, proflavine has been identified, through a limited screen of selected small heterocyclic compounds, as a specific and high-affinity RRE-IIB binder which inhibits the interaction of the Rev peptide with RRE-IIB. Direct and competitive 2-AP fluorescence binding assays reveal that there are at least two classes of proflavine binding sites on RRE-IIB: a high-affinity site that competes with the Rev peptide for binding to RRE-IIB (K(D) approximately 0.1 +/- 0.05 microM) and a weaker binding site(s) (K(D) approximately 1.1 +/- 0.05 microM). Titrations of RRE-IIB with proflavine, monitored using (1)H NMR, demonstrate that the high-affinity proflavine binding interaction occurs with a 2:1 (proflavine:RRE-IIB) stoichiometry, and NOEs observed in the NOESY spectrum of the 2:1 proflavine.RRE-IIB complex indicate that the two proflavine molecules bind specifically and close to each other within a single binding site. NOESY data further indicate that formation of the 2:1 proflavine.RRE-IIB complex stabilizes base pairing and stacking within the internal purine-rich bulge of RRE-IIB in a manner analogous to what has been observed in the Rev peptide.RRE-IIB complex. The observation that proflavine competes with Rev for binding to RRE-IIB by binding as a dimer to a single high-affinity site opens the possibility for rational drug design based on linking and modifying it and related compounds.     

Water, Shape Recognition, Salt Bridges, and Cation-Pi Interactions Differentiate Peptide Recognition of the HIV Rev-Responsive Element

Recognition of the human immunodeficiency virus Rev-responsive element (RRE) RNA by the Rev protein is an essential step in the viral life cycle. Formation of the Rev-RRE complex signals nucleocytoplasmic export of unspliced and partially spliced viral RNA. Essential components of the complex have been localized to a minimal arginine-rich Rev peptide and stem IIB of RRE. In vitro selection studies have identified a synthetic peptide known as RSG 1.2 that binds with better specificity and affinity to RRE than the Rev peptide. NMR structures of both peptide-RNA complexes of Rev and RSG 1.2 bound to RRE stem IIB have been solved and reveal gross structural differences between the two bound complexes. Molecular dynamics simulations of the Rev and RSG 1.2 peptides in complex with RRE stem IIB have been simulated to better understand on an atomic level how two arginine-rich peptides of similar length recognize the same sequence of RNA with such different structural motifs. While the Rev peptide employs some base-specific hydrogen bonding for recognition of RRE, shape recognition, through contact with the sugar-phosphate backbone, and cation-pi interactions are also important. Molecular dynamics simulations suggest that RSG 1.2 binds more tightly to the RRE sequence than Rev by forming more base-specific contacts, using water to mediate peptide-RNA contacts, and is held in place by a strong salt bridge network spanning the major groove of the RNA.     

Molecular recognition of a branched peptide with HIV-1 Rev Response Element (RRE) RNA

Interaction of HIV-1 rev response element (RRE) RNA with its cognate protein, Rev, is critical for HIV-1 replication. Understanding the mode of interaction between RRE RNA and ligands at the binding site can facilitate RNA molecular recognition as well as provide a strategy for developing anti-HIV therapeutics. Our approach utilizes branched peptides as a scaffold for multivalent binding to RRE IIB (high affinity rev binding site) with incorporation of unnatural amino acids to increase affinity via non-canonical interactions with the RNA. Previous high throughput screening of a 46,656-member library revealed several hits that bound RRE IIB RNA in the sub-micromolar range. In particular, the lead compound, 4B3, displayed a K_d value of 410?nM and demonstrated selectivity towards RRE. A ribonuclease protection assay revealed that 4B3 binds to the stem-loop structure of RRE IIB RNA, which was confirmed by SHAPE analysis with 234 nt long NL4-3 RRE RNA. Our studies further indicated interaction of 4B3 with both primary and secondary Rev binding sites.     

Diverse mutants of HIV RRE IIB recognize wild‐type Rev ARM or Rev ARM R35G‐N40V

The binding of human immunodeficiency virus Rev protein via its arginine‐rich motif (ARM) to an internal loop in the Rev‐response element region IIB (RRE IIB) is necessary for viral replication. Many variant RNAs and ARMs that bind Rev and RRE IIB have been found. Despite the essential role of Rev asparagine 40 in recognition, the Rev ARM double‐mutant R35G‐N40V functions well in a Rev–RRE IIB reporter assay, indicating R35G‐N40V uses a distinct recognition strategy. To examine how RRE IIB may evolve specificity to wild‐type Rev ARM and R35G‐N40V, 10 RRE IIB libraries, each completely randomized in overlapping regions, were screened with wild‐type Rev ARM and R35G‐N40V using a reporter system based on bacteriophage λ N antitermination. Consistent with previous studies, a core element of RRE IIB did not vary, and substitutions occurred at conserved residues only in the presence of other substitutions. Notably, the groove‐widening, non‐canonical base‐pair G48:G71 was mutable to U48:G71 without strong loss of binding to wild‐type Rev ARM, suggesting U48:G71 performs the same role by adopting the nearly isosteric, reverse wobble base pair. Originating from RRE IIB, as few as one or two substitutions are sufficient to confer specificity to wild‐type Rev or Rev R35G‐N40. The diversity of RRE IIB mutants that maintain binding to wild‐type Rev ARM and R35G‐N40V supports neutral theories of evolution and illustrates paths by which viral RNA–protein interactions can evolve new specificities. Rev–RRE offers an excellent model with which to study the fine structure of how specificity evolves. Copyright © 2015 John Wiley & Sons, Ltd.     

Characterization and in vitro activity of a branched peptide boronic acid that interacts with HIV-1 RRE RNA

A branched peptide containing multiple boronic acids was found to bind RRE IIB selectively and inhibit HIV-1 p24 capsid production in a dose-dependent manner. Structure–activity relationship studies revealed that branching in the peptide is crucial for the low micromolar binding towards RRE IIB, and the peptide demonstrates selectivity towards RRE IIB in the presence of tRNA. Footprinting studies suggest a binding site on the upper stem and internal loop regions of the RNA, which induces enzymatic cleavage of the internal loops of RRE IIB upon binding.     

Cooperative dimerization of a stably folded protein directed by a flexible RNA in the assembly of the HIV Rev dimer–RRE stem II complex

The binding of the HIV‐1 Rev protein as an oligomer to a viral RNA element, the Rev‐response element (RRE), mediates nuclear export of genomic RNA. Assembly of the Rev–RRE ribonucleoprotein (RNP) complex is nucleated by the binding of the first Rev molecule to stem IIB of the RRE. This is followed by stepwise addition of a total of ~six Rev molecules along the RRE through a combination of RNA–protein and protein–protein interactions. RRE stem II, which forms a three‐way junction consisting of stems IIA, IIB and IIC, has been shown to bind to two Rev molecules in a cooperative manner, with the second Rev molecule binding to the junction region of stem II. The results of base substitutions at the stem II junction, and characterization of stem II junction variants selected from a randomized library showed that an “open” flexible structure is preferred for binding of the second Rev molecule, and that binding of the second Rev molecule to the junction region is not sequence‐specific. Alanine substitutions of a number of Rev amino acid residues implicated to be important for Rev folding in previous structural studies were found to result in a dramatic decrease in the binding of the second Rev molecule. These results support the model that proper folding of Rev is critical in ensuring that the flexible RRE is able to correctly position Rev molecules for specific RNP assembly, and suggests that targeting Rev folding may be effective in the inhibition of Rev function. Copyright © 2015 John Wiley & Sons, Ltd.     

Assignment and modeling of the Rev Response Element RNA bound to a Rev peptide using 13C-heteronuclear NMR

Summary The Rev Response Element (RRE) RNA-Rev protein interaction is important for regulation of gene expression in the human immunodeficiency virus. A model system for this interaction, which includes stem IIB of the RRE RNA and an arginine-rich peptide from the RNA-binding domain of Rev, was studied using multidimensional heteronuclear NMR. Assignment of the RNA when bound to the peptide was obtained from NMR experiments utilizing uniformly and specifically ¹³C-labeled RNA. Isotopic filtering experiments on the specifically labeled RNA enabled unambiguous assignment of unusual nonsequential NOE patterns present in the internal loop of the RRE. A three-dimensional model of the RNA in the complex was obtained using restrained molecular dynamics calculations. The internal loop contains two purine-purine base pairs, which are stacked to form one continuous helix flanked by two A-form regions. The formation of a G-G base pair in the internal loop requires an unusual structure of the phosphate backbone. This structural feature is consistent with mutational data as being important for the binding of Rev to the RRE. The G-G base pair may play an important role in opening the normally narrow major groove of A-form RNA to permit binding of the Rev basic domain.     

Specificity of RSG-1.2 peptide binding to RRE-IIB RNA element of HIV-1 over Rev peptide is mainly enthalpic in origin

Rev is an essential HIV-1 regulatory protein which binds to the Rev responsive element (RRE) present within the env gene of HIV-1 RNA genome. This binding facilitates the transport of the RNA to the cytoplasm, which in turn triggers the switch between viral latency and active viral replication. Essential components of this complex have been localized to a minimal arginine rich Rev peptide and stem IIB region of RRE. A synthetic peptide known as RSG-1.2 binds with high binding affinity and specificity to the RRE-IIB than the Rev peptide, however the thermodynamic basis of this specificity has not yet been addressed. The present study aims to probe the thermodynamic origin of this specificity of RSG-1.2 over Rev Peptide for RRE-IIB. The temperature dependent melting studies show that RSG-1.2 binding stabilizes the RRE structure significantly (ΔT _m = 4.3°C), in contrast to Rev binding. Interestingly the thermodynamic signatures of the binding have also been found to be different for both the peptides. At pH 7.5, RSG-1.2 binds RRE-IIB with a K_a = 16.2±0.6×10⁷ M⁻¹ where enthalpic change ΔH = −13.9±0.1 kcal/mol is the main driving force with limited unfavorable contribution from entropic change TΔS = −2.8±0.1 kcal/mol. A large part of ΔH may be due to specific stacking between U72 and Arg15. In contrast binding of Rev (K_a = 3.1±0.4×10⁷ M⁻¹) is driven mainly by entropy (ΔH = 0 kcal/mol and TΔS = 10.2±0.2 kcal/mol) which arises from major conformational changes in the RNA upon binding.     

Specific binding of a basic peptide from HIV-1 Rev.

Human immunodeficiency virus type I (HIV-1) encodes a regulatory protein, Rev, which is required for cytoplasmic expression of incompletely spliced viral mRNA. Rev activity is mediated through specific binding to a cis-acting Rev responsive element (RRE) located within the env region of HIV-1. A monomer Rev binding site corresponding to 37 nucleotides of the RRE (IIB RNA) was studied by RNA footprinting, modification interference experiments and mutational analysis. Surprisingly, a 17 amino acid peptide, corresponding to the basic domain of Rev, binds specifically to this site at essentially identical nucleotides and probably induces additional base pairing. The Rev protein and related peptide interact primarily with two sets of nucleotides located at the junction of single and double stranded regions, and at an additional site located within a helix. This suggests that the domains of proteins responsible for specific RNA binding can be remarkably small and that the interaction between RNA and protein can probably induce structure in both constituents.     

Real-time kinetics of HIV-1 Rev-Rev response element interactions. Definition of minimal binding sites on RNA and protein and stoichiometric analysis.

The kinetics of interaction between the human immunodeficiency virus-1 Rev protein and its RNA target, Rev response element (RRE) RNA was determined in vitro using a biosensor technique. Our results showed that the primary Rev binding site is a core stem-loop RNA molecule of 30 nucleotides that bound Rev at a 1:1 ratio, whereas the 244-nucleotide full-length RRE bound four Rev monomers. At high Rev concentrations, additional binding of Rev to RRE was observed with ratios of more than 10:1. Because RRE mutants that lacked the core binding site and were inactive in vivo bound Rev nonspecifically at these concentrations, the real stoichiometric ratio of Rev-RRE is probably closer to 4:1. Binding affinity of Rev for RRE was approximately 10(-10) M, whereas the affinity for the core RNA was about 10(-11) M, the difference being due to the contribution of low affinity binding sites on the RRE. Mathematical analysis suggested cooperativity of Rev binding, probably mediated by the Rev oligomerization domains. C-terminal deletions of Rev had no effect on RRE binding, but truncation of the N terminus by as few as 11 residues significantly reduced binding specificity. This method was also useful to rapidly evaluate the potential of aminoglycoside antibiotics, to inhibit the Rev-RRE interaction.     

Analysis of the EIAV Rev-responsive element (RRE) reveals a conserved RNA motif required for high affinity Rev binding in both HIV-1 and EIAV

A cis-acting RNA regulatory element, the Rev-responsive element (RRE), has essential roles in replication of lentiviruses, including human immunodeficiency virus (HIV-1) and equine infection anemia virus (EIAV). The RRE binds the viral trans-acting regulatory protein, Rev, to mediate nucleocytoplasmic transport of incompletely spliced mRNAs encoding viral structural genes and genomic RNA. Because of its potential as a clinical target, RRE-Rev interactions have been well studied in HIV-1; however, detailed molecular structures of Rev-RRE complexes in other lentiviruses are still lacking. In this study, we investigate the secondary structure of the EIAV RRE and interrogate regulatory protein-RNA interactions in EIAV Rev-RRE complexes. Computational prediction and detailed chemical probing and footprinting experiments were used to determine the RNA secondary structure of EIAV RRE-1, a 555 nt region that provides RRE function in vivo. Chemical probing experiments confirmed the presence of several predicted loop and stem-loop structures, which are conserved among 140 EIAV sequence variants. Footprinting experiments revealed that Rev binding induces significant structural rearrangement in two conserved domains characterized by stable stem-loop structures. Rev binding region-1 (RBR-1) corresponds to a genetically-defined Rev binding region that overlaps exon 1 of the EIAV rev gene and contains an exonic splicing enhancer (ESE). RBR-2, characterized for the first time in this study, is required for high affinity binding of EIAV Rev to the RRE. RBR-2 contains an RNA structural motif that is also found within the high affinity Rev binding site in HIV-1 (stem-loop IIB), and within or near mapped RRE regions of four additional lentiviruses. The powerful integration of computational and experimental approaches in this study has generated a validated RNA secondary structure for the EIAV RRE and provided provocative evidence that high affinity Rev binding sites of HIV-1 and EIAV share a conserved RNA structural motif. The presence of this motif in phylogenetically divergent lentiviruses suggests that it may play a role in highly conserved interactions that could be targeted in novel anti-lentiviral therapies.     

Human immunodeficiency virus rev protein recognizes a target sequence in rev-responsive element RNA within the context of RNA secondary structure.

Human immunodeficiency virus type 1 Rev protein modulates the distribution of viral mRNAs from the nucleus to the cytoplasm by interaction with a highly structured viral RNA sequence, the Rev-responsive element (RRE). To identify the minimal functional elements of RRE, we evaluated mutant RREs for Rev binding in vitro and Rev response in vivo in the context of a Gag expression plasmid. The critical functional elements fold into a structure composed of a stem-loop A, formed by the ends of the RRE, joined to a branched stem-loop B/B1/B2, between bases 49 and 113. The 5' 132 nucleotides of RRE, RREDDE, which possessed a similar structure, bound Rev efficiently but were nonfunctional in vivo, implying separate binding and functional domains within the RRE. Excision of stem-loop A reduced Rev binding significantly and abolished the in vivo Rev response. The B2 branch could be removed without severe impairment of binding, but deletions in the B1 branch significantly reduced binding and function. However, deletion of 12 nucleotides, including the 5' strand of stem B, abolished both binding and function, while excision of the 3' strand of stem B only reduced them. Maintenance of the native RRE secondary structure alone was not sufficient for Rev recognition. Many mutations that altered the primary structure of the critical region while preserving the original RNA conformation were Rev responsive. However, mutations that changed a 5'..CACUAUGGG..3' sequence in the B stem, without affecting the overall structure abolished both in vitro Rev binding and the in vivo Rev response.