Preparation of molecularly imprinted polymers using nitroxide-mediated living radical polymerization

The use of molecularly imprinted polymers (MIPs) in chemical and bioanalytical applications has been gaining in interest in recent years. Compared to their biological receptor counterparts, MIPs are easy to prepare, have long shelf stability and can be used under a variety of harsh conditions. The majority of MIPs currently used are produced by traditional free radical polymerization. One drawback with the use of standard free radical initiators is that little control can be exerted over the chemical processes that form the final imprinted cavities. In this study we set out to investigate the application of controlled (living) free radical polymerization to the preparation of MIPs. This was exemplified by the synthesis of cholesterol-imprinted bulk polymers by nitroxide-mediated polymerization (NMP). A sacrificial covalent bond was employed to maintain imprinting fidelity at elevated temperature. Selective uptake of cholesterol from solutions in hexane was studied with imprinted polymers prepared under different conditions. The imprinted hydrolyzed MIP prepared by NMP displayed higher selective cholesterol binding than that prepared by a traditional radical polymerization.     

Binding site characteristics of 17beta-estradiol imprinted polymers

The variety of applications utilizing molecularly imprinted polymers (MIPs) requires synthetic strategies yielding different MIP formats including films, irregular particles, or spheres, along with precise knowledge on the specific material characteristics, such as binding capacity and binding efficiency of these materials. In response to this demand, MIPs are prepared in different formats by variation of the polymerization methodology. It is commonly agreed that micro- and sub-microspheres are particularly advantageous MIP formats, due to their monodispersity and facile synthesis procedures in contrast to conventional imprinted polymers prepared by bulk polymerization. However, the differences in actual rebinding characteristics of different MIP formats based on molecular interactions under a variety of binding/rebinding conditions have not been studied in detail to date. Consequently, the present work details an analytical strategy generically applicable to MIP systems for rebinding studies including equilibrium binding, non-equilibrium binding, and release experiments enabling more profound understanding on the molecular interactions between the imprinted materials and the template molecules. In this study, three MIP formats were considered for the same template molecule, 17beta-estradiol: irregularly shaped particulate polymers prepared by bulk polymerization and grinding, microspheres, and sub-microspheres. The latter two formats were synthesized via precipitation polymerization using different processing strategies. The morphologies and porosities of the resulting imprinted materials were characterized by scanning electron microscopy (SEM) and Brunauer-Emmett-Teller (BET) analysis, respectively. The obtained results indicate that microspheres prepared by precipitation polymerization provide superior rebinding properties during equilibrium binding in contrast to bulk polymers and sub-microspheres, and that the rebinding properties are different during equilibrium binding versus non-equilibrium binding. The median binding affinity constant determined during non-equilibrium rebinding is higher than the values obtained from equilibrium rebinding. Furthermore, the binding site distribution appears more homogeneous thief derived from non-equilibrium rebinding, as reflected in a heterogeneity index of m=0.725. Moreover, it is hypothesized that the specific interactions between template and monomers are related to the porosity of the imprinted polymers, which implies that the amount of binding sites and the pore sized distribution of the imprinted materials are a critical factor in achieving the desired MIP performance in various analytical applications. The BET results indicate that particles prepared with lower cross-linker-to-template ratio have a reduced surface area. Furthermore, it can be expected that there are less specific binding sites available at particles with reduced surface area and pore volume given similar distribution of the binding sites, as confirmed by the equilibrium binding isotherm studies. The pore size distribution results reveal that control of the pore size in the range of 100-180 A is essential to obtain the desired retention properties and Gaussian peak shape during HPLC analysis of small molecules.     

Comparison of monofunctional and multifunctional monomers in phosphate binding molecularly imprinted polymers

In this study, molecularly imprinted polymers (MIPs) prepared using a multifunctional and a monofunctional monomer were compared with respect to their affinities, selectivities, and imprinting efficiencies for organophosphates. This is of interest because multifunctional monomers have higher affinities than traditional monofunctional monomers for their target analytes and thus should yield MIPs with higher affinities and selectivities. However, polymers containing multifunctional monomer may also have a higher number of unselective, non-templated binding sites. This increase in background binding sites could lead to a decrease in the magnitude of the imprinting effect and in the selectivity of the MIP. Therefore, phosphate selective imprinted and non-imprinted polymers (NIPs) were prepared using a novel multifunctional triurea monomer. The binding properties of these polymers were compared with polymers prepared using a monofunctional monourea monomer. The binding affinities and selectivities of the monomers, imprinted polymers, and NIPs were characterized by NMR titration, binding uptake studies, and binding isotherms. MIPs prepared with the triurea monomer showed higher binding affinity and selectivity for the diphenylphosphate anion in organic solvents than the MIPs prepared with the monofunctional monomer. Surprisingly, the binding properties of the NIPs revealed that the polymers prepared using the multifunctional and monofunctional monomers were very similar in affinity and selectivity. Thus, the multifunctional monomers increase not only the affinity of the MIP but also enhance the imprinting effect.     

The role of living/controlled radical polymerization in the formation of improved imprinted polymers

In this work, living/controlled radical polymerization (LRP) is compared with conventional free radical polymerization in the creation of highly and weakly cross-linked imprinted poly(methacrylic acid-co-ethylene glycol dimethacrylate) networks. It elucidates, for the first time, the effect of LRP on the chain level and begins to explain why the efficiency of the imprinting process is improved using LRP. Imprinted polymers produced via LRP exhibited significantly higher template affinity and capacity compared with polymers prepared using conventional methods. The use of LRP in the creation of highly cross-linked imprinted polymers resulted in a fourfold increase in binding capacity without a decrease in affinity; whereas weakly cross-linked gels demonstrated a nearly threefold increase in binding capacity at equivalent affinity when LRP was used. In addition, by adjusting the double bond conversion, we can choose to increase either the capacity or the affinity in highly cross-linked imprinted polymers, thus allowing the creation of imprinted polymers with tailorable binding parameters. Using free radical polymerization in the creation of polymer chains, as the template-monomer ratio increased, the average molecular weight of the polymer chains decreased despite a slight increase in the double bond conversion. Thus, the polymer chains formed were shorter but greater in number. Using LRP neutralized the effect of the template. The addition of chain transfer agent resulted in slow, uniform, simultaneous chain growth, resulting in the formation of longer more monodisperse chains. Reaction analysis revealed that propagation time was extended threefold in the formation of highly cross-linked polymers when LRP techniques were used. This delayed the transition to the diffusion-controlled stage of the reaction, which in turn led to the observed enhanced binding properties, decreased polydispersity in the chains, and a more homogeneous macromolecular architecture.     

Water‐compatible silica sol–gel molecularly imprinted polymer as a potential delivery system for the controlled release of salicylic acid

Molecularly imprinted polymers (MIPs) for salicylic acid were synthesized and evaluated in aqueous environments in the aim to apply them as drug delivery carriers. One organic MIP and one inorganic MIP based on the sol–gel process were synthesized. The organic MIP was prepared by radical polymerization using the stoichiometric functional monomer, 1‐(4‐vinylphenyl)‐3‐(3,5‐bis(trifluoromethyl)phenyl)urea, which can establish strong electrostatic interactions with the –COOH of salicylic acid. The sol–gel MIP was prepared with 3‐(aminopropyl)triethoxysilane and trimethoxyphenylsilane, as functional monomers and tetraethyl orthosilicate as the crosslinker. While the organic MIPs bound the target specifically in acetonitrile, they exhibited lower binding in the presence of water, although the imprinting factor increased under these conditions, due to reduced non‐specific binding. The sol–gel MIP has a high specificity and capacity for the drug in ethanol, a solvent compatible with drug formulation and biomedical applications. In vitro release profiles of the polymers in water were evaluated, and the results were modelled by Fick's law of diffusion and the power law. Analysis shows that the release mechanism was predominantly diffusion‐controlled. Copyright © 2014 John Wiley & Sons, Ltd.     

Understanding the relationships between molecule structure and imprinting effect of two acetyl‐nitrogen heterocyclic compounds

The molecularly imprinted polymers (MIPs) for two structural analogs, 1,3,5‐triacetyl‐1,3,5‐triazacyclohexane (TRAT) and 1,3,5,7‐tetraacetyl‐1,3,5,7‐tetraazacyclooctane (TAT), have been synthesized respectively under the same conditions. The TAT‐MIP showed excellent imprinting effect, whereas the TRAT‐MIP did not. To understand the different imprinting effects of the MIPs prepared from these two templates, the geometric structures and energetic properties of complexes formed around TAT and TRAT were studied computationally. The results indicate that in liquid phase, for the complexes formed with TAT and its nearest neighbor molecules, the magnitude of the binding energy increases with the number of surrounding TAT, methacrylic acid, and acetonitrile (ACT), whereas for the cases of TRAT, the magnitude of the binding energy increases with the number of surrounding TRAT and trimethylolpropane trimethacrylate. The studied systems form stronger and thus more stable networks encapsulating TAT than with TRAT. ACT may also play an important role in the polymerization phase in stabilizing the shapes of the cavities that TATs reside in. We propose these as the major factors that affect the different imprinting effects of the two MIPs. Copyright © 2016 John Wiley & Sons, Ltd.     

Characterization of molecularly imprinted polymers using a new polar solvent titration method

A new method of characterizing molecularly imprinted polymers (MIPs) was developed and tested, which provides a more accurate means of identifying and measuring the molecular imprinting effect. In the new polar solvent titration method, a series of imprinted and non‐imprinted polymers were prepared in solutions containing increasing concentrations of a polar solvent. The polar solvent additives systematically disrupted the templation and monomer aggregation processes in the prepolymerization solutions, and the extent of disruption was captured by the polymerization process. The changes in binding capacity within each series of polymers were measured, providing a quantitative assessment of the templation and monomer aggregation processes in the imprinted and non‐imprinted polymers. The new method was tested using three different diphenyl phosphate imprinted polymers made using three different urea functional monomers. Each monomer had varying efficiencies of templation and monomer aggregation. The new MIP characterization method was found to have several advantages. To independently verify the new characterization method, the MIPs were also characterized using traditional binding isotherm analyses. The two methods appeared to give consistent conclusions. First, the polar solvent titration method is less susceptible to false positives in identifying the imprinting effect. Second, the method is able to differentiate and quantify changes in binding capacity, as measured at a fixed guest and polymer concentration, arising from templation or monomer aggregation processes in the prepolymerization solution. Third, the method was also easy to carry out, taking advantage of the ease of preparing MIPs. Copyright © 2014 John Wiley & Sons, Ltd.     

Multi‐cycle recovery of lactoferrin and lactoperoxidase from crude whey using fimbriated high‐capacity magnetic cation exchangers and a novel “rotor–stator” high‐gradient magnetic separator

Cerium (IV) initiated “graft‐from” polymerization reactions were employed to convert M‐PVA magnetic particles into polyacrylic acid‐fimbriated magnetic cation exchange supports displaying ultra‐high binding capacity for basic target proteins. The modifications, which were performed at 25 mg and 2.5 g scales, delivered maximum binding capacities (Q_max) for hen egg white lysozyme in excess of 320 mg g^?1, combined with sub‐micromolar dissociation constants (0.45–0.69 µm) and “tightness of binding” values greater than 49 L g^?1. Two batches of polyacrylic acid‐fimbriated magnetic cation exchangers were combined to form a 5 g pooled batch exhibiting Q_max values for lysozyme, lactoferrin, and lactoperoxidase of 404, 585, and 685 mg g^?1, respectively. These magnetic cation exchangers were subsequently employed together with a newly designed “rotor–stator” type HGMF rig, in five sequential cycles of recovery of lactoferrin and lactoperoxidase from 2 L batches of a crude sweet bovine whey feedstock. Lactoferrin purification performance was observed to remain relatively constant from one HGMF cycle to the next over the five operating cycles, with yields between 40% and 49% combined with purification and concentration factors of 37‐ to 46‐fold and 1.3‐ to 1.6‐fold, respectively. The far superior multi‐cycle HGMF performance seen here compared to that observed in our earlier studies can be directly attributed to the combined use of improved high capacity adsorbents and superior particle resuspension afforded by the new “rotor–stator” HGMS design. Biotechnol. Bioeng. 2013; 110: 1714–1725. © 2013 Wiley Periodicals, Inc.     

Proximate Composition and Nutrient Elements in the “Unusual” Algal “Jellies” of Lake Oguta in Southern Nigeria

The proximate composition, nutrient and trace elements of the planktonic algal “jellies” of Lake Oguta in Southern Nigeria, are provided as guides to their utilization and control, using flood (rainy) and dry season samples. These “jellies” are an unusual, macroscopic planktonic algal community in the lake, made up mostly of blue-green algae (Microcystis, Anabaena, Chroococcus) with some green algae (e. g. Spirogyra) and pennate diatoms (e.g. Navicula) rather epiphytic on the mucous jellies of the blue-green algae. Water content was high (98.2% mean, range 97.5-99.5%). Ash, protein and fat had values of 41.7 (39.0-46.2%), 16.9 (15.6-19.4%), and 2.0 (1.7-2.1%) respectively. Crude fibre and carbohydrates were high (25.8% and 12.4%). The levels of phosphorus and nitrogen were rather high, so were the major cations whose order of dominance (Ca > K > Mg > Na) differed from that of the lake water. Macronutrients increased in their concentrations during the rainy flood season while the reverse was the case with the micronutrients. Diagenesis of the endogenic minerals rather than anthropogenic factors are thought to be the reason for the seasonal changes in the ionic concentrations. Possible uses of the algal jellies are discussed as well as their control options.     

Preliminary Observations on the Nature,Taxonomic Composition,Distribution, Behaviour and Nutrient Requirements of the “Unusual” Algal “Jellies” of Oguta Lake in Southeastern Nigeria

Preliminary observations were made between October 1982 and May 1983 on the nature, taxonomic composition, spatial distribution, buoyancy behaviour and nutrient requirements of some unusual planktonic algal “jellies” in Oguta Lake in Southeastern Nigeria. These “jellies” are macroscopic, blue-green algal masses whose excessive mucilage of high consistency acts as substrata for other epiphytic components viz. diatoms and green algae. They are more abundant in the lentic areas of the lake, undergo diurnal vertical movements and have their growth enhanced by spikes of nitrogen and phosphorus salts into their aquatic medium. The effects of these “jellies” on the ecology and general water use of the lake are discussed. Speculations on the reasons for their occurrence are given and possible control measures outlined.     

Insight into molecular imprinting in precipitation polymerization systems using solution NMR and dynamic light scattering

Molecular imprinting is a powerful synthetic technique for generating template-defined binding sites in cross-linked polymers. One scientific challenge in molecular imprinting research is to understand the intermolecular interactions leading to molecular complexation and the process of binding site formation during polymerization. In this work, we present a novel method for studying the molecular imprinting process in precipitation polymerization systems. This method employs solution (1) H NMR and dynamic light scattering (DLS) to investigate the association of template molecules with colloidal particles and the dynamic process of particle growth. Under precipitation polymerization conditions, the colloidal particles formed did not interfere with NMR signals from the soluble components, allowing unreacted monomers and free template to be easily quantified. To examine the process of particle nucleation and growth, DLS was used to measure the hydrodynamic particle size at different reaction times. To corroborate the interpretation of the NMR and DLS results, imprinted nanoparticles were collected at different reaction times and their binding characteristics were evaluated using radioligand-binding analysis. Our experimental results provide new insights into the molecular imprinting process that will be useful in the development of new imprinted nanoparticles.     

Molecularly imprinted micro and nanospheres for the selective recognition of 17beta-estradiol

A one-step precipitation polymerization procedure for the synthesis of molecularly imprinted polymers selective for 17beta-estradiol yielding imprinted micro and nanospheres was developed in this study and compared to templated materials obtained by conventional bulk polymerization. The polymer particles prepared by precipitation polymerization exhibited a regular spherical shape at the micro and nanoscale with a high degree of monodispersity. Moreover, the influence of the polymerization temperature, and the ratio of functional monomer to cross-linker on the size of the obtained particles was investigated. The selectivity of the imprinted micro and nanospheres was evaluated by HPLC analysis and via radioligand binding assays. HPLC separation experiments revealed that the imprinted microspheres provide higher or similar affinity to the template in contrast to imprinted polymers prepared by conventional bulk polymerization or synthesized by multi-step swelling/polymerization methods. The dimensions of the imprinted nanospheres facilitate suspension in solution rendering them ideal for binding assay applications. Results from saturation and displacement assays prove that the imprinted nanospheres exhibit superior specific affinity to the target molecule in contrast to control materials. The binding properties of the nanospheres including binding isotherms and affinity distribution were studied via Freundlich isotherm affinity distribution (FIAD) analysis. Moreover, release experiments show that 70% of rebound 17beta-estradiol was released from the imprinted nanospheres within the first 2 h, while more intimately bound 17beta-estradiol molecules (approx. 16%) were released in the following 42 h. Fitting Brunnauer-Emmet-Teller (BET) multi-point adsorption isotherms to the obtained results indicated that the micro and nanospheres are characterized by a comparatively homogenous and narrow distribution of mesopores in contrast to the corresponding bulk polymers.     

THE EVOLUTION OF COSTLY MATE PREFERENCES II. THE “HANDICAP” PRINCIPLE

We use a general additive quantitative genetic model to study the evolution of costly female mate choice by the “handicap” principle. Two necessary conditions must be satisfied for costly preference to evolve. The conditions are (i) biased mutation pressure on viability and (ii) a direct relationship between the degree of expression of the male mating character and viability. These two conditions explain the success and failure of previous models of the “handicap” principle. Our model also applies to other sources of fitness variation like migration and host-parasite coevolution, which cause effects equivalent to biased mutation.     

Rapid detection of “Candidatus Phytoplasma mali” by recombinase polymerase amplification assays

Isothermal recombinase polymerase amplification (RPA) assays for the specific detection of “Candidatus Phytoplasma mali (Ca. P. mali),” the causal agent of apple proliferation, were developed. The assays amplify a fragment of the imp gene and amplimers were detected either by fluorescence in real‐time mode (TwistAmp^®exo assay) using a fluorophore‐labelled probe or by direct visualization employing a lateral flow device (TwistAmp^®nfo assay/Milenia^®HybriDetect). The RPA assays specifically amplified DNA from “Ca. P. mali” strains, and cross‐reactivity with other phytoplasmas or plant DNA was not observed. The limit of detection was determined with a cloned imp standard, and positive results were obtained down to 10 copies with both RPA assay formats. In comparison with a TaqMan real‐time PCR assay based on the same target gene, the RPA assays were equally sensitive, but results were obtained faster. Simplified nucleic acid extraction procedures from plant tissue with Tris‐ and CTAB‐based buffers revealed that crude Tris–DNA extracts were a suitable source for RPA tests while larger concentrations of CTAB were inhibitory. This is the first report of RPA‐based assays for the detection of “Ca. P. mali”. The assays are suitable for high‐throughput screening of plant material and point‐of‐care diagnostic and can be potentially combined with a simplified DNA extraction procedure.     

Room temperature synthesis and binding studies of solution‐processable histamine‐imprinted microspheres

Accurate quantification of histamine levels in food and in biological samples is important for monitoring the quality of food products and for the detection of pathophysiological conditions. In this study, solution processable histamine‐imprinted microspheres were synthesized at 30°C via dilute free radical phototochemical polymerization technique using ethylene glycol dimethacrylate (EGDMA) as the crosslinker and methacrylic acid (MAA) as the monomer. The processability of the resulting polymer is dictated by the monomer feed concentration (eg, 4 wt% 80:20 EGDMA:MAA formulation) and solvent (acetonitrile). Whereas, the particle size is influenced by the monomer feed concentration, the presence of template molecule, and independent of the crosslinker content. Evaluation of the binding performance of the photochemically imprinted polymers (PCP) with different crosslinker content (80 and 90 wt%) indicated that the selective binding capacity was notably higher in PCP‐80 (N= 16.0 μmol/g) compared to PCP‐90 (N= 10.1 μmol/g) when analyzed via frontal analysis capillary electrophoresis (FACE) using Freundlich isotherm. In addition, PCP‐80 microspheres are more selective toward histamine than conventional thermal polymers (CTP‐80) prepared at 60°C in the presence of structural analogs such as histidine, imidazole, and tryptamine under cross‐rebinding and competitive conditions. These results demonstrated that histamine‐selective imprinted polymers can be obtained readily using room temperature photochemical polymerization where these materials can be subsequently used as recognition element for optical‐based histamine sensing.     

Characterization of the heterogeneous binding site affinity distributions in molecularly imprinted polymers

Molecularly imprinted polymers (MIPs) are polymers that can be tailored with affinity and selectivity for a molecule of interest. Offsetting the low cost and ease of preparation of MIPs is the presence of binding sites that vary widely in affinity and selectivity. Presented is a review of methods that take into account binding site heterogeneity when calculating the binding properties of MIPs. These include the bi-Langmuir, Freundlich, and Langmuir-Freundlich binding models. These methods yield a measure of heterogeneity in the form of binding site affinity distributions and the heterogeneity index. Recent developments have made these methods surprisingly easy to use while also yielding more accurate measures of the binding properties of MIPs. These have allowed for easier comparison and optimization of MIPs. Heterogeneous binding models have also led to a better understanding of the imprinting process and of the advantages and limitations of MIPs in chromatographic and sensor applications.     

Fluorescence anisotropy studies of molecularly imprinted polymers.

A molecularly imprinted polymer (MIP) is a biomimetic material that can be used as a biochemical sensing element. We studied the steady-state and time-resolved fluorescence and fluorescence anisotropy of anthracene-imprinted polyurethane. We compared MIPs with imprinted analytes present, MIPs with the imprinted analytes extracted, MIPs with rebound analytes, non-imprinted control polymers (non-MIPs) and non-MIPs bound with analytes to understand MIP's binding behaviour. MIPs and non-MIPs had similar steady-state fluorescence anisotropy in the range 0.11-0.24. Anthracene rebound in MIPs and non-MIPs had a fluorescence lifetime of tau = 0.64 ns and a rotational correlation time of phi(F) = 1.2-1.5 ns, both of which were shorter than that of MIPs with imprinted analytes present (tau = 2.03 ns and phi(F) = 2.7 ns). The steady-state anisotropy of polymer solutions increased exponentially with polymerization time and might be used to characterize the polymerization extent in situ.     

Isolation and detection of steroids from human urine by molecularly imprinted solid-phase extraction and liquid chromatography

Naturally occurring steroids such as progesterone, testosterone and 17β-estradiol were analyzed in this study. These bio-identical molecules paradoxically can be either beneficial or harmful. Unfortunately as growth promoters can be toxic and cancerogenic at elevated levels. Due to difficulty in monitoring at trace quantities of these hormones in biological matrices specific adsorption materials molecularly imprinted polymers (MIPs) were used for preconcentration and clean up in sample preparation step. A non-covalent imprinting approach was used for bulk polymerization of progesterone, testosterone and 17β-estradiol imprinted polymers. Synthesis of MIPs was achieved by thermal, UV and γ irradiation initiated polymerization whereby were used methacrylic acid (MAA), 4-vinylpyridine (4-VP) as functional monomers, ethylene glycol dimethacrylate (EDMA), trimethylolpropane trimethacrylate (TRIM) as cross-linking agents and acetonitrile, isooctane–toluene (1:99, v/v) and chloroform as porogen solvents. It was also used as initiator 2,2′-azobis(2-methylpropionitrile) (AIBN) or benzyl methyl ether (BME). The MIPs were applied as selective sorbents in solid-phase extraction (SPE). Molecularly imprinted solid-phase extraction (MISPE) considered as hyphenated technique were applied in extraction step before HPLC-DAD analysis of steroids from human urine.     

Biophysical Examinations of the Bending Stability of Various Stele Types and the Upright Axes of Early “Vascular” Land Plants

Biophysical methods allow quantitative deductions as to the “bending effectivity” of various stele types and the contribution of different tissues to the stability of upright plant axes. Considering the first occurrence of the different stele types in geological history, a strong tendency towards a higher “bending effectivity” can be observed. It can be shown that Rhynia gwynne-vaughanii, Aglaophyton major (Rhynia major) and Asteroxylon mackiei as well as probably the vast majority of early “vascular” land plants were turgor systems, i.e. that the parenchyma (when fully turgescent) is by far the most important contributory factor towards the bending stability of the upright axes.