Soil salinisation: a local life cycle assessment impact category

Salinity is an increasing environmental problem in agricultural ecosystems and is not adequately represented in conventional life cycle assessment (LCA) impact categories. It is often not the total quantity of salts emitted or the proportion of salt accumulated in the soil profile that is the primary mechanism for deteriorating soil conditions for irrigated salinity, rather the ratio of major cations in the soil matrix and the potential for colloid dispersion and reduced permeability. A soil salinisation potential (SP) is proposed as an indicator for irrigated salinity and potential soil degradation from poor irrigation practices. The indicator uses the threshold electrolyte concentration concept that predicts the adjusted sodium adsorption ratio (SAR)/ Electrical conductivity (EC) ratio that soil will no longer flocculate, but potentially disperse. The SAR is converted to a threshold EC and compared to the measured EC in order to develop a site-specific irrigation equivalence factor (EF). This site/region/process specific EF is then used to weight the sodium load to soil and repeated for each stage throughout the entire life cycle to determine the overall Salinisation Potential (SP). The data required for calculating the SP is generally readily available either on site or from the water chemistry of the local watercourses. Preliminary calculations simply require the volume, pH, electrical conductivity (EC), alkalinity and the concentrations of Na, Ca, and Mg of the irrigation water. The site/process/region specific nature of the indicator ensures a quantitative measure to enable comparisons between different systems and is useful for identifying stages in the life cycle of a product (particularly food products), where the potential for soil salinisation and soil degradation is most severe.     

Considering human toxicity as an impact category in life cycle assessment

Characterization of toxic chemicals with relevance to human exposure does normally not belong to Life Cycle Assessments (LCA) and is still a topic of research. The concept of hazard potential classes proposed in this paper is primarily based on threshold limit values that are considered to be a measure of the severity of potential effects. In the absence of threshold limit values the R-phrases of the ordinance of dangerous substances are used. Substances are assigned to five hazard potential classes (A to E). Potentially dangerous chemicals are identified and substances of low toxicological relevance are excluded from further evaluation. The location where a probable exposure might occur (indoor versus outdoor) and inter-media transport of substances is considered. The product comparison is based both on the results of the proposed “semi-quantitative screening method” and on toxicological expert knowledge.     

Positive impacts in social life cycle assessment: state of the art and the way forward

Purpose

Social life cycle assessment (SLCA) is a methodology under continuous development, which may be applied at different scales: from products to economic sectors up to systems at region (meso) and country (macro) scales. Traditionally, SLCA has been focusing on the assessment of negative social externalities, whereas also positive social impacts could be associated to human interventions. The purpose of the present study is to understand how positive impacts are defined in published literature and how they could be assessed through indicators. The aim is to clarify the concept among scholars and to support decision making in business and policy context.

Methods

The study uses a systematic review approach in order to analyse the types of indicators adopted. In the field of SLCA and according to Paragahawewa et al. (2009), “[I]ndicators are ‘pointers’ to the state of the impact categories (and/or subcategories) being evaluated by the SLCA”. Indicators can be quantitative, semi-quantitative or qualitative (UNEP/SETAC 2009). This review was carried out in order to identify and analyse positive impacts and indicators. After careful scrutiny, 47 papers containing theoretical frameworks were considered, as well as 46 papers presenting case studies.

Results and discussion

Compared to environmental life cycle assessment (E-LCA), where the presence of positive impacts is lower, evaluating benefits or positive impacts can still play a major role in SLCA (Benoît et al. 2010). A quarter of the analysed papers on theoretical frameworks take into account the topic of positive impacts and indicators. Results from case study analysis highlight as “workers”, was the most considered stakeholder (in 100 % of the analysed papers), and as the majority of positive indicators used in the case study analysed are recorded in relation to “other value chain actors”. Within the concept of “positive impacts”, no reference should be made merely to the utility of a product or service. In a broader sense, we could refer to solutions improving the conditions of one or various stakeholders involved. In other words, these are solutions that carry a positive contribution to one or more stakeholders without harming others.

Conclusions

So far, positive impacts are barely covered in literature. There is a clear need of streamlining definition and indicators, especially if they should be applied in a policy context complementing traditional—and often monetary-based, cost-benefit analysis (CBA).

     

Bioinformatics in Colombia: state of the art and perspectives

Bioinformatics emerged about 50 years ago, but it was developed greatly during the early 1980s by robust databases such as GenBank, EMBL, and DNA Database of Japan (DDBJ). Bioinformatic routines were rapidly adapted once the main algorithms for sequence analysis became available worldwide. As in other science fields, bioinformatics had minimal impact in low-income countries of Latin America until the last decade. We revised the bioinformatics state of art in Colombia and found a few bioinformatics groups carrying out basic computational biology research. Nowadays, bioinformatics in Colombia has a hopeful scenario thanks to recent science policies adopted by the Colombian Government. Such policies have been adopted in order to establish a new model of sustainable scientific research. In this brief report we revise the bioinformatics state of the art in Colombia. Finally, we conclude with some considerations for the proposed science model and we describe different perspectives of interest for the Colombian scientific community.     

Addressing water needs of freshwater ecosystems in life cycle impact assessment of water consumption: state of the art and applicability of ecohydrological approaches to ecosystem quality characterization

Purpose

In recent history, human development overbalanced towards economic growth has often been accompanied by the degradation and reduction of freshwater resources at the expense of freshwater dependent ecosystems. For their subsistence and correct functioning, understanding environmental water requirements (EWR) represents an area of great interest for life cycle impact assessment (LCIA) and it has been only marginally explored. The aim of this paper is to investigate how this concept has evolved in ecological and hydrological literature and how it can be better integrated in LCIA, to identify potential options for improvement of LCIA indicators in the short, mid and long term.

Methods

To address the limitations of existing LCIA approaches in modelling EWR, four families of EWR methods have been reviewed, namely hydrological, hydraulic, habitat simulation and holistic methods. Based on existing scientific literature and their broad application, 24 methods have been selected and their suitability to be adopted in LCIA has been evaluated against nine criteria, with regard to data management issues, accuracy, scientific robustness, and potential for future development. A semi-quantitative performance score has been subsequently assigned for each criterion, showing the main strengths and weaknesses of selected methods.

Results and discussion

The underlying rationale of the chosen approaches is markedly different, likewise the input information needed and results applicability. Hydrological methods are well suited for the development of global models and they are the only ones currently considered in LCIA, although their applicability remains limited to water stress indicators. Habitat modelling is identified as an essential step for the development of mechanistic LCIA models and endpoint indicators. In this respect, hydraulic, habitat simulation and holistic methods are fit for the purpose. However, habitat simulation methods represent the best compromise between scientific robustness and applicability in LCIA. For this reason, a conceptual framework for the development of habitat-based characterization factors has been proposed. Among the evaluated habitat simulation methods, ESTIMHAB showed the best performance and was the method retained for the development of an LCIA model that will assess the consequences of water consumption on stream ecosystems.

Conclusions

This study identifies the advantages of specific modelling approaches for the assessment of water requirements for ecosystems. Selected methods could support the development of LCIA models at different levels. In the short-term for improving environmental relevance of water stress indicators, and in the mid/long-term to build up midpoint habitat indicators relating water needs of ecosystems with new endpoint metrics.

     

Towards social life cycle assessment: a quantitative product social impact assessment

Purpose

The main goal of this paper is to present the feasibility of the quantitative method presented in the Product Social Impact Assessment (PSIA) handbook throughout a case study. The case study was developed to assess the social impacts of a tire throughout its entire life cycle. We carried out this case study in the context of the Roundtable for the Product Social Metrics project in which 13 companies develop two methodologies, a qualitative and a quantitative one, for assessing the social impact of product life cycle.

Methods

The quantitative methodology implemented for assessing the social impact of a Run On Flat tire mounted in a BMW 3 series consists of 26 indicators split in three groups. Each group represents a stakeholder group. Primary data of the quantitative indicators were collected along the product life cycle of the Run On Flat by involving the companies, which owned the main steps of the product life cycle. Throughout this case study, an ideal/worst-case scenario was defined for the distance-to-target approach to compare the social performances of more products when they are available.

Results and discussion

The implementation of the PSIA quantitative method to a Run On Flat illustrated the necessity to have a referencing step in order to interpret the results. This is particularly important when the results are used to support decision-making process in which no experts are involved. It frequently happens in a big company where the management level has to take often decisions on different topics. Reference values were defined using ideal or worst-case-target scenarios (Fontes et al. 2014). For those topics where it was possible, an ideal/ethical scenario was defined, e.g., 0 h of child labor per product. In other cases, we defined a worst-case scenario, e.g., 0 training hours per product. It was then possible to interpret the results using a distance-to-target approach. A matrix was developed in the case study for identifying in which step of the product life cycle data is not available; that means we need more transparency in the supply chain.

Conclusions

Each value of the matrix can be compared to the ideal/worst scenario to compare the step to each other and to identify along the product life cycle which step and the relative supplier that needs further measures to improve the product performance. Furthermore, a quantitative value for each indicator related to the product life cycle is calculated and compared with the ideal/worst scenario. The case study on Run On Flat represents the first implementation of the quantitative method of PSIA.

     

The environmental impact of activities after life: life cycle assessment of funerals

Purpose

Although the funeral market is propagating new ‘green’ alternatives and exploring innovative techniques like resomation, very little is known about the environmental impact of funerals. This research aimed to develop a benchmark of funerals, by quantifying the environmental impacts of the most common funeral techniques, i.e. burial and cremation, by identifying where the main impacts originate from and by comparing these impacts to impacts of other activities during a person’s life.

Methods

The environmental impacts of funerals were analysed by means of a life cycle assessment (LCA), based on Dutch company information, literature and expert judgements. The results were analysed per impact category but also on an aggregated level by means of shadow prices. Two sensitivity analyses were performed: one examined the high impact of cotton in funeral coffins; the other checked the results by means of another weighting method.

Results and discussion

The results showed no significant difference between the two funeral techniques in five impact categories. Burial has the lowest impact in more than half of the categories, but its impact is many times higher in the two most differing categories than for cremation. The total shadow price of burial is about 30 % higher than the shadow price of cremation, but the main cause for this difference is a highly debated category, namely land use. If the results would be considered without the shadow prices of land impact categories, burial would score 25 % lower than cremation. These results are representing average practise and may deviate on certain aspects for other countries, but as a starting point for further studies, this benchmark is well applicable.

Conclusions and recommendations

This study delivered an environmental benchmark of funerals and insights in the impacts of the individual processes, which can be used in further assessment of ’green’ funeral options. The benchmark results show that the environmental impact of funerals is largely determined by secondary processes and that the total impact can be quite small in comparison to other human activities. Besides these environmental insights, it is important to take into account social, cultural, climatic, local, economical and ethical arguments before changing policies or giving recommendations.

     

Assessing potential desertification environmental impact in life cycle assessment

Background, aim and scope  

Life cycle assessment (LCA) enables the objective assessment of global environmental burdens associated with the life cycle of a product or a production system. One of the main weaknesses of LCA is that, as yet, there is no scientific agreement on the assessment methods for land-use related impacts, which results in either the exclusion or the lack of assessment of local environmental impacts related to land use. The inclusion of the desertification impact in LCA studies of any human activity can be important in high-desertification risk regions.     

Overview and recommendations for regionalized life cycle impact assessment

The International Journal of Life Cycle Assessment - Regionalized life cycle impact assessment (LCIA) has rapidly developed in the past decade, though its widespread application, robustness, and...     

Lead industry life cycle studies: environmental impact and life cycle assessment of lead battery and architectural sheet production

Purpose

This paper will give an overview of LCA studies on lead metal production and use recently conducted by the International Lead Association.

Methods

The lead industry, through the International Lead Association (ILA), has recently completed three life cycle studies to assess the environmental impact of lead metal production and two of the products that make up approximately 90 % of the end uses of lead, namely lead-based batteries and architectural lead sheet.

Results and discussion

Lead is one of the most recycled materials in widespread use and has the highest end-of-life recycling rate of all commonly used metals. This is a result of the physical chemical properties of the metal and product design, which makes lead-based products easily identifiable and economic to collect and recycle. For example, the end-of-life collection and recycling rates of lead automotive and industrial batteries and lead sheet in Europe are 99 and 95 %, respectively, making them one of the few products that operate in a true closed loop. These high recycling rates, coupled with the fact that both lead-based batteries and architectural lead sheet are manufactured from recycled material, have a beneficial impact on the results of LCA studies, significantly lowering the overall environmental impact of these products. This means that environmental impacts associated with mining and smelting of lead ores are minimised and in some cases avoided completely. The lead battery LCA assesses not only the production and end of life but also the use phase of these products in vehicles. The study demonstrates that the technological capabilities of innovative advanced lead batteries used in start-stop vehicles significantly offset the environmental impact of their production. A considerable offset is realised through the savings achieved in global warming potential when lead-based batteries are installed in passenger vehicles with start-stop and micro-hybrid engine systems which have significantly lower fuel consumption than regular engines.

Conclusions

ILA has undertaken LCAs which investigate the environmental impact associated with the European production of lead metal and the most significant manufactured lead products (lead-based batteries used in vehicles and architectural lead sheet for construction) to ensure up-to-date and robust data is publically and widely available.

     

Choice of land reference situation in life cycle impact assessment

Purpose

Land use life cycle impact assessment is calculated as a distance to target value—the target being a desirable situation defined as a reference situation in Milà i Canals et al.’s (Int J Life Cycle Assess 12(1):2–4, 2007) widely accepted framework. There are several reference situations. This work aims to demonstrate the effect of the choice of reference situation on land impact indicators.

Methods

Various reference situations are reported from the perspective of the object of assessment in land in life cycle assessment (LCA) studies and the modeling choices used in life cycle land impact indicators. They are analyzed and classified according to additional LCA modeling requirements: the type of LCA approach (attributional or consequential), cultural perspectives (egalitarian, hierarchist or individualist), and temporal preference. Sets of characterization factors (CF) by impact pathway, land cover, and region are calculated for different reference situations. These sets of CFs by reference situation are all compared with a baseline set. A case study on different crop types is used to calculate impact scores from different sets of CFs and compare them.

Results and discussion

Comparing the rankings of the CFs from two different sets present inversions from 5% to 35% worldwide. Impact scores of the case study present inversions of 10% worldwide. These inversions demonstrate that the choice of a reference situation may reverse the LCA conclusions for the land use impact category. Moreover, these reference situations must be consistent with the different modeling requirements of an LCA study (approach, cultural perspective, and time preference), as defined in the goal and scope.

Conclusions

A decision tree is proposed to guide the selection of a consistent and suitable choice of reference situation when setting other LCA modeling requirements.

     

IMPACT 2002+: A new life cycle impact assessment methodology

The new IMPACT 2002+ life cycle impact assessment methodology proposes a feasible implementation of a combined midpoint/damage approach, linking all types of life cycle inventory results (elementary flows and other interventions) via 14 midpoint categories to four damage categories. For IMPACT 2002+, new concepts and methods have been developed, especially for the comparative assessment of human toxicity and ecotoxicity. Human Damage Factors are calculated for carcinogens and non-carcinogens, employing intake fractions, best estimates of dose-response slope factors, as well as severities. The transfer of contaminants into the human food is no more based on consumption surveys, but accounts for agricultural and livestock production levels. Indoor and outdoor air emissions can be compared and the intermittent character of rainfall is considered. Both human toxicity and ecotoxicity effect factors are based on mean responses rather than on conservative assumptions. Other midpoint categories are adapted from existing characterizing methods (Eco-indicator 99 and CML 2002). All midpoint scores are expressed in units of a reference substance and related to the four damage categories human health, ecosystem quality, climate change, and resources. Normalization can be performed either at midpoint or at damage level. The IMPACT 2002+ method presently provides characterization factors for almost 1500 different LCI-results, which can be downloaded at http://www.epfl.ch/impact     

Comparing priority setting in integrated hazardous substance assessment and in life cycle impact assessment

Purpose  

The purpose of the study was to compare three recent Life Cycle Impact Assessment (LCIA) models in prioritizing substances and products from national emission inventories. The focus was on ecotoxic and human toxic impacts. The aim was to test model output against expert judgment on chemical risk assessment.