Life cycle thinking in small and medium enterprises: the results of research on the implementation of life cycle tools in Polish SMEs—part 2: LCA related aspects

Purpose

This article is the second part of a series of articles presenting the results of research on the implementation of lifecycle management tools in small- and medium-sized companies in Poland. This work is part of a project financed by the Polish Agency for Enterprise Development (PAED), which began in February 2011. It was carried out by the Wielkopolska Quality Institute, a business environment institution associated with the Polish Centre for life cycle assessment (PCLCA). The main practical objective of the project was to support small and medium enterprises (SMEs) in their business development, e.g. by expanding their horizons beyond the sphere of their operation and identifying new areas for the improvement and promotion of the products and services they offer. The specific objective of the analysis on the environmental impact was an attempt to answer the question of whether environmental LCA is a good management tool for this type of business. Part 2 describes results of the evaluation of the implementation of LCA in SMEs conducted in 46 companies involved in the project.

Methods

In order to assess the effectiveness of the project and the effectiveness of the implementation of LCA and life cycle costing (LCC), a survey was conducted of small and medium businesses where the implementation work had been fully completed. In total, 46 organisations agreed to participate in the LCA survey, which was almost 66 % of all the companies where the LCA and LCC studies had been carried out within the project. The survey was conducted using individual in-depth interviews. Questions to the representatives of the companies referred both to aspects of their functioning in the market (characteristics of a company, its market share, management systems, environmental policy, suppliers and clients) and the operation of their environmental service (assessment of its effectiveness, motivation and difficulties in its implementation), as well as opinions on the potential applications of LCA in their current operations.

Results and discussion

The experience and observations of LCA experts resulting from their cooperation with the organisations analysed are largely supported by the results of the survey. The overall impression gained from the project is that the small- and medium-sized enterprises analysed have a problem with accepting and understanding the life cycle perspective and show limited interest in taking liability for environmental aspects beyond the mandatory legal standards and boundaries of their business operations. The survey shows that the companies rarely analyse environmental aspects appearing on many different stages of the life cycle of their products. Most of them focus on their current operations while trying to meet the mandatory legal requirements relating to environmental protection. It should be noted, however, that SMEs taking part in the studies appreciate the opportunities offered by LCA, their usefulness in business practice, recognise the potential for using life cycle techniques in the future and their impact on the management process, procedure or thinking about the products they manufacture. The result of the study is the identification of four key areas relevant to SMEs which may affect their willingness to adopt the life cycle perspective and undertake environmental measures.

Conclusions

It seems that implementing LCT in small- and medium-sized enterprises requires a special approach. These are often companies with limited human resources (often just a few people) and financial resources (often operating on the verge of survival), with a weak position in a supply chain and, therefore, having various priorities in their daily operation. The researchers also encountered awareness barriers as a result of which the idea of going beyond an organisation and making an entire LCA of a product was often simply misunderstood. The studies conducted among SMEs have shown that managers' own intuition and research on customer preferences were largely conducive to improve existing or introducing new products or services, while changes were mostly introduced due to the requirements of the market, or the desire to reduce costs. It can be assumed that their non-obligatory nature also contributed to the relatively low interest in LCA initiatives and not recognising their usefulness. It seems that it would be useful to carry out relatively simple, but integrated, LCA/LCC analyses in SMEs so that the companies would clearly see the economic effect of the proposed environmental improvements. The analyses conducted lead to the conclusion that the incentive for SMEs to take measures should come from outside, e.g. as requirements for green public procurements, or as part of assessment made by suppliers in a supply chain.     

Life cycle thinking in small and medium enterprises: the results of research on the implementation of life cycle tools in Polish SMEs—part 1: background and framework

Purpose

This article is the first of a series of articles presenting the results of research on the implementation of life cycle management tools in small- and medium-sized companies in Poland. This work is part of a project financed by the Polish Agency for Enterprise Development (PAED) which began in February 2011. It was carried out by the Wielkopolska Quality Institute—a business environment institution associated with the Polish Centre for Life Cycle Assessment (PCLCA). The main practical objective of the project was to support small and medium enterprises (SMEs) in their business development, e.g. by expanding their horizons beyond the sphere of their operation and identifying new areas for improvement and promotion of the products and services on offer. These publications are a voice in the discussion on the opportunities and pertinence of implementing life cycle thinking (LCT) in small- and medium-sized enterprises and an attempt to identify potential barriers arising from specific characteristics of SMEs which could hinder or even prevent the effective implementation of life cycle techniques. Part 1 presents the situation of SMEs in Poland, general objectives of the project and organisation of the survey process.

Methods

It was decided to carry out research on the effectiveness of the implementation of LCA and life cycle costing (LCC) in organisations that had received financial support for the implementation of life cycle techniques. Financial constraints, which might potentially be a reason for limited interest in LC techniques among SMEs in Poland, were taken into account. Thus, financial support provided an opportunity for the project to obtain information from a wide range of companies, not only from those companies that were particularly aware of the benefits of LC techniques or had a very good financial situation. Research based on the method of individual in-depth interviews was preceded by an analysis of literature showing the status of SMEs in Poland. Given the results, the project objectives were formulated and the ways of conducting the research were defined.

Results and discussion

The comparison of Polish SMEs with the same category of companies in the EU shows some similarities, such as the percentage of companies engaged in various businesses. The differences are expressed primarily in the financial potential, which in the case of Polish SMEs, is significantly smaller than the average in the EU. In the SME sector, there are less than half as many small businesses in Poland than in the EU. There are, however, many more microbusinesses in Poland. An evaluation of the prevalence of LCA and LCC techniques indicates that they are used by just 3 % of Polish SMEs, which is a very small proportion compared to the more than 50 % of SMEs taking any environmental measures. Information collected on specific details of Polish SMEs was used to identify the target group and develop a survey questionnaire which aimed to audit, among other things, the approach to environmental and economic analyses in the past and the approach to the LCA and/or LCC analyses that were implemented from the point of view of difficulties in their implementation and potential use of the results.

Conclusions

Part 1 of the series of articles demonstrates a marginal-scale dissemination of life cycle management techniques among Polish SMEs. Companies definitely prefer to introduce relatively simple solutions that do not require specialised knowledge or unnecessary costs, e.g. they introduce energy-saving bulbs and waste segregation. Only a small percentage of companies implement more complex activities, and most commonly, these are medium-sized companies with greater financial and human capital. So what should be done to make SMEs use life cycle techniques more frequently? Is it appropriate to make changes in the methodology and life cycle techniques as such, or should, rather, the incentive for SMEs to use LCT come from outside as a requirement of public institutions or suppliers in a supply chain? Answers to these questions are provided in the research conclusions presented in parts 2 and 3 of the series of articles.     

The Polish Centre for Life Cycle Assessment—the centre for life cycle assessment in Poland

The Polish Centre for life cycle assessment (LCA) is a non-profit organization founded in 2009 following the initiative of people involved in Polish scientific and R&D centers dealing with LCA. The role, mission as well structure and organization of PCLCA have been presented. Moreover, the current state of LCA implementation in Poland has been mentioned. However, LCA has been mainly used for scientific research less by industry and business.     

What affects the innovation performance of small and medium-sized enterprises (SMEs) in the biotechnology industry? An empirical study on Korean biotech SMEs

Research-intensive small and medium-sized enterprises (SMEs) play a crucial role in the advancement of the biotechnology industry. This paper explored the impacts of internal and contextual variables on innovative activity in Korea and compared the results of this analysis with previous studies of other countries. Our analysis of 149 Korean biotech SMEs showed that the ratio of R&D expenditure to sales, the ratio of R&D employees to total employees, CEO characteristics, governmental support and international networking are positively correlated with a firm's innovation performance. The results may help decision makers to better foster SMEs in the Korean biotechnology industry.     

Life cycle inventories of electricity generation and power supply in version 3 of the ecoinvent database—part I: electricity generation

Purpose

Life cycle inventories (LCI) of electricity generation and supply are among the main determining factors regarding life cycle assessment (LCA) results. Therefore, consistency and representativeness of these data are crucial. The electricity sector has been updated and substantially extended for ecoinvent version 3 (v3). This article provides an overview of the electricity production datasets and insights into key aspects of these v3 inventories, highlights changes and describes new features.

Methods

Methods involved extraction of data and analysis from several publically accessible databases and statistics, as well as from the LCA literature. Depending on the power generation technology, either plant-specific or region-specific average data have been used for creating the new power generation inventories representing specific geographies. Whenever possible, the parent–child relationship was used between global and local activities. All datasets include a specific technology level in order to support marginal mixes used in the consequential version of ecoinvent. The use of parameters, variables and mathematical relations enhances transparency. The article focuses on documentation of LCI data on the unlinked unit process level and presents direct emission data of the electricity-generating activities.

Results and discussion

Datasets for electricity production in 71 geographic regions (geographies) covering 50 countries are available in ecoinvent v3. The number of geographies exceeds the number of countries due to partitioning of power generation in the USA and Canada into several regions. All important technologies representing fossil, renewable and nuclear power are modelled for all geographies. The new inventory data show significant geography-specific variations: thermal power plant efficiencies, direct air pollutant emissions as well as annual yields of photovoltaic and wind power plants will have significant impacts on cumulative inventories. In general, the power plants operating in the 18 newly implemented countries (compared to ecoinvent v2) are on a lower technology level with lower efficiencies and higher emissions. The importance of local datasets is once more highlighted.

Conclusions

Inventories for average technology-specific electricity production in all globally important economies are now available with geography-specific technology datasets. This improved coverage of power generation representing 83 % of global electricity production in 2008 will increase the quality of and reduce uncertainties in LCA studies worldwide and contribute to a more accurate estimation of environmental burdens from global production chains. Future work on LCI of electricity production should focus on updates of the fuel chain and infrastructure datasets, on including new technologies as well as on refining of the local data.

     

Life cycle inventories of electricity generation and power supply in version 3 of the ecoinvent database—part II: electricity markets

Purpose

Representative, consistent and up-to-date life cycle inventories (LCI) of electricity supply are key elements of ecoinvent as an LCI background database since these are often among the determining factors with regard to life cycle assessment (LCA) results. ecoinvent version 3 (ev3) offers new LCI data of power supply (electricity markets) in 71 geographies. This article gives an overview of these electricity markets and discusses new ecoinvent features in the context of power supply.

Methods

The annual geography- and technology-specific electricity production for the year 2008 specifies the technology shares on the high-, medium- and low-voltage level electricity markets. Data are based on IEA statistics. Different voltage levels are linked by transformation activities. Region-specific electricity losses due to power transmission and voltage transformation are considered in the market and transformation activities. The majority of the 71 power markets are defined by national boundaries. The attributional ecoinvent system model in ev3 with linking to average current suppliers results in electricity markets supplied by all geography-specific power generation technologies and electricity imports, while the consequential system model generates markets only linked to unconstrained suppliers.

Results and discussion

The availability of LCI data for 71 electricity markets in ev3 covering 50 countries reduces the “Rest-of-the-World” electricity supply not covered by country- or region-specific inventories to 17 % for the year 2008. Specific power supply activities for all countries contributing more than 1 % to global electricity production are available. The electricity markets show large variations concerning contributions from specific technologies and energy carriers. Imports can substantially change the national/regional power mix, especially in small markets. Large differences can also be observed between the electricity markets in the attributional and the consequential database calculation. Region-specific total power losses between production on the high voltage level and consumer on the low voltage level are on the order of 2.5–23 %.

Conclusions

Electricity supply mixes (electricity markets) in the ecoinvent database have been updated and substantially extended for v3. Inventories for electricity supply in all globally important economies are available with geography-specific technology and market datasets which will contribute to increasing quality and reducing uncertainties in LCA studies worldwide and to allow more accurate estimation of environmental burdens from global production chains. Future work should focus on improving the details of country-specific data, implementation of more countries into the database, splitting of large countries into smaller regions and on developing a more sophisticated approach specifying country-specific electricity mixes in consequential system models.

     

A scalable life cycle inventory of an electrical automotive traction machine—Part I: design and composition

Purpose

A scalable life cycle inventory (LCI) model of a permanent magnet electrical machine, containing both design and production data, has been established. The purpose is to contribute with new and easy-to-use data for LCA of electric vehicles by providing a scalable mass estimation and manufacturing inventory for a typical electrical automotive traction machine. The aim of this article (part I of two publications) is to present the machine design, the model structure, and an evaluation of the models’ mass estimations.

Methods

Data for design and production of electrical machines has been compiled from books, scientific papers, benchmarking literature, expert interviews, various specifications, factory records, and a factory site visit. For the design part, one small and one large reference machine were constructed in a software tool, which linked the machines’ maximum ability to deliver torque to the mass of its electromagnetically active parts. Additional data for remaining parts was then gathered separately to make the design complete. The two datasets were combined into one model, which calculates the mass of all motor subparts from an input of maximum power and torque. The range of the model is 20–200 kW and 48–477 Nm. The validity of the model was evaluated through comparison with seven permanent magnet electrical traction machines from established brands.

Results and discussion

The LCI model was successfully implemented to calculate the mass content of 20 different materials in the motor. The models’ mass estimations deviate up to 21% from the examples of real motors, which still falls within expectations for a good result, considering a noticeable variability in design, even for the same machine type and similar requirements. The model results form a rough and reasonable median in comparison to the pattern created by all data points. Also, the reference motors were assessed for performance, showing that the electromagnetic efficiency reaches 96–97%.

Conclusions

The LCI model relies on thorough design data collection and fundamental electromagnetic theory. The selected design has a high efficiency, and the motor is suitable for electric propulsion of vehicles. Furthermore, the LCI model generates representative mass estimations when compared with recently published data for electrical traction machines. Hence, for permanent magnet-type machines, the LCI model may be used as a generic component estimation for LCA of electric vehicles, when specific data is lacking.

     

Carbon and water footprint of coffee consumed in Finland—life cycle assessment

The International Journal of Life Cycle Assessment - Coffee is one of the most widely grown cash crops globally, but there are few scientific articles on its carbon footprint and water scarcity...     

An environmental assessment of small hydropower in India: the real costs of dams’ construction under a life cycle perspective

The International Journal of Life Cycle Assessment - In the last years, India has taken a number of initiatives to boost small hydropower development based on the assumption of being a green energy...     

Accounting for biodiversity in life cycle impact assessments of forestry and agricultural systems—the BioImpact metric

The International Journal of Life Cycle Assessment - Life cycle assessment (LCA) is a useful method for assessing environmental impacts at large scales. Biodiversity and ecosystem diversity are...     

A graphical representation for consequential life cycle assessment of future technologies—Part 2: two case studies on choice of technologies and evaluation of technology improvements

Purpose  

To construct future visions of how innovative technologies should be used in the envisioned sustainable society while being aware of system-wide environmental impacts, consequential life cycle assessment (c-LCA) is useful. To systematically evaluate the technologies being aware of uncertainties in the choice of technologies made in the future, in this article, we propose a novel graphical representation for theoretical range of impacts that contain results from c-LCA studies. This approach allows analyses of the consequences of technology introduction without conducting a detailed modeling of consequences.     

The balancing of virtues—Muslim perspectives on palliative and end of life care: Empirical research analysing the perspectives of service users and providers

In this paper, I will share findings from a qualitative study that offers a thematic analysis of 76 interviews with Muslim patients and families as well as doctors, nurses, allied health professionals, chaplains and community faith leaders across the United Kingdom. The data show that for many Muslims, Islam—its texts and lived practice—is of central importance when they are deliberating about death and dying . Central to these deliberations are virtues rooted within Islamic theology and ethics, the traditions of adab (virtue) and aqhlaq (proper conduct). Themes analysed include theological and moral understandings around the virtues of hope and acceptance. The study provides an analysis of these themes in relation to the experiences of Muslim patients and families arriving at meaning making around death and dying and how this interfaces with their interaction with biomedicine and healthcare. The study shows that the juxtaposition of different values and moral frameworks require careful negotiation when Muslim patients and families encounter the healthcare system. The study also describes how healthcare professionals and staff of other faiths and no faith encounter Muslim beliefs and practices, and the challenges they face in interpreting virtues and values rooted in faith, especially when these are perceived to be mutually opposed or inconsistent.     

Life cycle assessment and cost analysis of residential buildings in south east of Turkey: part 1—review and methodology

Purpose

Buildings are responsible for more than 40 % of global energy used, and as much as 30 % of global greenhouse gas emissions. In order to quantify the energy and material inputs and environmental releases associated with each stage of construction sector, life cycle energy, greenhouse gas emissions, and cost analysis of contemporary residential buildings have been conducted within two parts.

Methods

This paper is the first part of the study which includes the literature review and methodology used for such a comprehensive analysis. It was determined that there are three basic methods used in life cycle analysis: process analysis, input–output (I–O) analysis, and hybrid analysis. In this study, Inventory of Carbon and Energy (ICE) is used for the calculation of primary energy requirements and greenhouse gas emissions. The second part of this study is about the application of the methodology which considers two actual buildings constructed in Gaziantep, Turkey.

Results and discussion

The proposed research focused on building construction, operating, and demolition phases. Energy efficiency, emission parameters, and costs are defined for the building per square meter basis. It is seen that the primary energy use and emissions of residential buildings around the world falls in the range of about 10 to 40 GJ/m² and 1–10 t CO₂/m² respectively.

Conclusions

The literature survey demonstrates that there are limited number of studies about life cycle cost assessment (LCCA) of residential buildings in the world. It was decided to use the ICE database as it is one of the most comprehensive databases for building materials, globally. The results of the study show that minimizing energy, material, and land use by considering potential impacts to the environment on a life cycle basis are the basic steps in designing an energy-efficient and environmental-friendly building.

     

Hotspot identification in the clothing industry using social life cycle assessment—opportunities and challenges of input-output modelling

Purpose

A cradle-to-gate, input/output-based social life cycle assessment (SLCA) was conducted using the Swedish clothing consumption as a case study. The aim was to investigate the influence of the cut-off rule and the definition of “hotspots” in social hotspot assessment. A second aim was to identify social hotspots of Swedish clothing on a national level.

Methods

The case study was based on the SLCA methodology provided in the Guidelines for Social Life Cycle Assessment of Products (Benoît and Mazijn 2009). An input/output model was used to define the product system from cradle to gate. The negative social hotspots were evaluated for a set of social indicators that were selected by consumers. The impact assessment was conducted on a sector and country level by using the Social Hotspots Database. The identified sectors of the economy with high and very high levels of risk were listed for each social indicator.

Results and discussion

The results pinpointed some hotspots throughout the supply chain for Swedish clothing consumption. Some unexpected sectors such as commerce and business services in Bangladesh were identified as important hotspots as well as main sectors in the production phase such as plant fibres, textiles and garments that would be expected also on the bases of a traditional process analysis. A sensitivity analysis on different cut-off values showed the extent to which the choice of cut-off rule can directly affect the results via influence over the number of country-specific sectors (CSSs) in the product system. The influence of the hotspot definition was investigated by evaluating the working hour intensity for low- and medium-risk levels for three different indicators. The results show that for child labour, 92 % of the share of working hours was associated with low- and medium-risk levels. Therefore, the evaluation of risk levels other than high and very high can provide a more complete picture of the hotspots.

Conclusions

The application of input/output-based SLCA on the clothing production supply chain provided a more complete picture of the social hotspots than with traditional process-based SLCA. Some unexpected sectors related to commerce and business appeared as social hotspots in the clothing industry. The study explored some important parameters in applying an input/output-based SLCA. The results show that the cut-off values and definition of hotspots in relation to risk levels can directly influence the results.

     

Life cycle assessment of electricity transmission and distribution—part 2: transformers and substation equipment

Purpose  

The purpose of this paper is to characterize the environmental impacts of equipment used in power transmission and distribution. This study is divided in two parts, each addressing different main components of the electrical grid system. This part is concerned with the impacts of transformers and substation equipment while in part 1 a similar analysis is presented for power lines and cables.     

Reporting the implementation of the Three Rs in European primate and mouse research papers: are we making progress?

It is now more than 20 years since both Council of Europe Convention ETS123 and EU Directive 86/609/EEC were introduced, to promote the implementation of the Three Rs in animal experimentation and to provide guidance on animal housing and care. It might therefore be expected that reports of the implementation of the Three Rs in animal research papers would have increased during this period. In order to test this hypothesis, a literature survey of animal-based research was conducted. A randomly-selected sample from 16 high-profile medical journals, of original research papers arising from European institutions that featured experiments which involved either mice or primates, were identified for the years 1986 and 2006 (Total sample = 250 papers). Each paper was scored out of 10 for the incidence of reporting on the implementation of Three Rs-related factors corresponding to Replacement (justification of non-use of non-animal methods), Reduction (statistical analysis of the number of animals needed) and Refinement (housing aspects, i.e. increased cage size, social housing, enrichment of cage environment and food; and procedural aspects, i.e. the use of anaesthesia, analgesia, humane endpoints, and training for procedures with positive reinforcement). There was no significant increase in overall reporting score over time, for either mouse or primate research. By 2006, mouse research papers scored an average of 0 out of a possible 10, and primate research papers scored an average of 1.5. This review provides systematic evidence that animal research is still not properly reported, and supports the call within the scientific community for action to be taken by journals to update their policies.