Fermentation of corn fiber hydrolysate to lactic acid by the moderate thermophile <Emphasis Type="Italic">Bacillus coagulans</Emphasis>

A strain of Bacillus coagulans that converted mixed sugars of glucose, xylose, and arabinose to l-lactic acid with 85% yield at 50°C was isolated from composted dairy manure. The strain was tolerant to aldehyde growth inhibitors at 2.5 g furfural/l, 2.5 g 5-hydroxymethylfurfural/l, 2.5 g vanillin/l, and 1.2 g p-hydroxybenzaldehyde/l. In a simultaneous saccharification and fermentation process, the strain converted a dilute-acid hydrolysate of 100 g corn fiber/l to 39 g lactic acid/l in 72 h at 50°C. Because of its inhibitor tolerance and ability to fully utilize pentose sugars, this strain has potential to be developed as a biocatalyst for the conversion of agricultural residues into valuable chemicals.     

Inhibitory action of toxic compounds present in lignocellulosic hydrolysates on xylose to xylitol bioconversion by <Emphasis Type="Italic">Candida guilliermondii</Emphasis>

The inhibitory action of acetic acid, ferulic acid, and syringaldehyde on metabolism of Candida guilliermondii yeast during xylose to xylitol bioconversion was evaluated. Assays were performed in buffered and nonbuffered semidefined medium containing xylose as main sugar (80.0 g/l), supplemented or not with acetic acid (0.8–2.6 g/l), ferulic acid (0.2–0.6 g/l), and/or syringaldehyde (0.3–0.8 g/l), according to a 2³ full factorial design. Since only individual effects of the variables were observed, assays were performed in a next step in semidefined medium containing different concentrations of each toxic compound individually, for better understanding of their maximum concentration that can be present in the fermentation medium without affecting yeast metabolism. It was concluded that acetic acid, ferulic acid, and syringaldehyde are compounds that may affect Candida guilliermondii metabolism (mainly cell growth) during bioconversion of xylose to xylitol. Such results are of interest and reveal that complete removal of toxic compounds from the fermentation medium is not necessary to obtain efficient conversion of xylose to xylitol by Candida guilliermondii. Fermentation in buffered medium was also considered as an alternative to overcome the inhibition caused by these toxic compounds, mainly by acetic acid.     

Production of <Emphasis Type="SmallCaps">l</Emphasis>-lactic acid from a mixture of xylose and glucose by co-cultivation of lactic acid bacteria

The production of optically pure lactic acid in a high yield from xylose or a mixture of xylose and glucose, which is a model hydrolysate of lignocellulose, is described. In a single cultivation, Enterococcus casseliflavus produced 38 g/l of lactic acid with an optical purity of 96% enantiomeric excess (ee) and 6.4 g/l of acetic acid from 50 g/l of xylose when MRS medium was used. When a mixture of 50 g/l of xylose and 100 g/l of glucose was used as the carbon source in a cultivation of E. casseliflavus alone, glucose was converted to lactic acid in the early phase of the cultivation but xylose was hardly consumed. In a co-cultivation where E. casseliflavus and Lactobacillus casei specific for glucose were simultaneously inoculated, little or no lactic acid was produced after the glucose was almost consumed. A co-cultivation with two-stage inoculation (in which E. casseliflavus was added at a cultivation time of 40 h after L. casei cells were inoculated) resulted in complete consumption of 50 g/l of xylose and 100 g/l of glucose. In the co-cultivation, 95 g/l of lactic acid with a high optical purity of 96% ee was obtained at 192 h. Such a co-cultivation using two microorganisms specific for each sugar is considered to be one promising cultivation technique for the efficient production of lactic acid from a sugar mixture derived from lignocellulose.     

Development of succinic acid production from corncob hydrolysate by <Emphasis Type="Italic">Actinobacillus succinogenes</Emphasis>

Succinic acid is one of the most important platform chemicals since it has great potential in industrial applications. In this study, corncob hydrolysate was used for succinic acid production. After diluted acid treatment, xylose was released from hemicellulose as the predominant monosaccharide in the hydrolysate, whereas glucose was released very little and most was retained as cellulose in the raw material. Without any detoxification, corncob hydrolysate was used directly as the carbon source in the fermentation. Actinobacillus succinogenes could utilize the sugars in the hydrolysate to produce succinic acid efficiently. Through medium optimization, yeast extract was selected as the nitrogen source and MgCO₃ was used to control pH. A total of 23.64 g/l of succinic acid was produced with a yield of 0.58 g/g based on consumed sugar, indicating that the waste corncob residue can be used to produce value-added chemicals practically.     

Carbon and nitrogen mineralization in soil amended with phenanthrene,anthracene and irradiated sewage sludge

Lactic acid production by Lactobacillus brevis and Lactobacillus pentosus on a hemicellulose hydrolysate (HH) of wet-oxidized wheat straw was evaluated. The potential of 11-12 g/l fermentable sugars was released from the HH through either enzymatic or acidic pretreatment. Fermentation of added xylose in untreated HH after wet-oxidation, showed no inhibition on the lactic acid production by either Lb. pentosus or Lb. brevis. Lb. pentosus produced lactate corresponding to 88% of the theoretical maximum yield regardless of the hydrolysis method, whereas Lb. brevis produced 51% and 61% of the theoretical maximum yield after enzymatic, or acid treatment of HH, respectively. Individually, neither of the two strains were able to fully utilize the relatively broad spectra of sugars released by the acid and enzyme treatments; however, lactic acid production increased to 95% of the theoretical maximum yield by co-inoculation of both strains. Xylulose was the main sugar released after enzymatic treatment of HH with Celluclast. Lb. brevis was able to degrade xylobiose, but was unable to assimilate xylulose, whereas Lb. pentosus was able to assimilate xylulose but unable to degrade xylobiose.     

Conversion of acid hydrolysate of oil palm empty fruit bunch to L-lactic acid by newly isolated Bacillus coagulans JI12

Cost-effective conversion of lignocellulose hydrolysate to optically pure lactic acid is commercially attractive but very challenging. Bacillus coagulans JI12 was isolated from natural environment and used to produce L-lactic acid (optical purity?>?99.5 %) from lignocellulose sugars and acid hydrolysate of oil palm empty fruit bunch (EFB) at 50 °C and pH 6.0 without sterilization of the medium. In fed-batch fermentation with 85 g/L initial xylose and 55 g/L xylose added after 7.5 h, 137.5 g/L lactic acid was produced with a yield of 98 % and a productivity of 4.4 g/L?h. In batch fermentation of a sugar mixture containing 8.5 % xylose, 1 % glucose, and 1 % L-arabinose, the lactic acid yield and productivity reached 98 % and 4.8 g/L?h, respectively. When EFB hydrolysate was used, 59.2 g/L of lactic acid was produced within 9.5 h at a yield of 97 % and a productivity of 6.2 g/L?h, which are the highest among those ever reported from lignocellulose hydrolysates. These results indicate that B. coagulans JI12 is a promising strain for industrial production of L-lactic acid from lignocellulose hydrolysate.     

<Emphasis Type="SmallCaps">l</Emphasis>(+)-Lactic acid production from non-food carbohydrates by thermotolerant <Emphasis Type="Italic">Bacillus coagulans</Emphasis>

Lactic acid is used as an additive in foods, pharmaceuticals, and cosmetics, and is also an industrial chemical. Optically pure lactic acid is increasingly used as a renewable bio-based product to replace petroleum-based plastics. However, current production of lactic acid depends on carbohydrate feedstocks that have alternate uses as foods. The use of non-food feedstocks by current commercial biocatalysts is limited by inefficient pathways for pentose utilization. B. coagulans strain 36D1 is a thermotolerant bacterium that can grow and efficiently ferment pentoses using the pentose-phosphate pathway and all other sugar constituents of lignocellulosic biomass at 50°C and pH 5.0, conditions that also favor simultaneous enzymatic saccharification and fermentation (SSF) of cellulose. Using this bacterial biocatalyst, high levels (150–180 g l⁻¹) of lactic acid were produced from xylose and glucose with minimal by-products in mineral salts medium. In a fed-batch SSF of crystalline cellulose with fungal enzymes and B. coagulans, lactic acid titer was 80 g l⁻¹ and the yield was close to 80%. These results demonstrate that B. coagulans can effectively ferment non-food carbohydrates from lignocellulose to l(+)-lactic acid at sufficient concentrations for commercial application. The high temperature fermentation of pentoses and hexoses to lactic acid by B. coagulans has these additional advantages: reduction in cellulase loading in SSF of cellulose with a decrease in enzyme cost in the process and a reduction in contamination of large-scale fermentations.     

Production of ethanol from corn stover hemicellulose hydrolyzate using <Emphasis Type="Italic">Pichia stipitis</Emphasis>

Hemicellulose liquid hydrolyzate from dilute acid pretreated corn stover was fermented to ethanol using Pichia stipitis CBS 6054. The fermentation rate increased with aeration but the pH also increased due to consumption of acetic acid by Pichia stipitis. Hemicellulose hydrolyzate containing 34 g/L xylose, 8 g/L glucose, 8 g/L Acetic acid, 0.73 g/L furfural, and 1 g/L hydroxymethyl furfural was fermented to 15 g/L ethanol in 72 h. The yield in all the hemicellulose hydrolyzates was 0.37–0.44 g ethanol/g (glucose + xylose). Nondetoxified hemicellulose hydrolyzate from dilute acid pretreated corn stover was fermented to ethanol with high yields, and this has the potential to improve the economics of the biomass to ethanol process.     

Identification and characterization of fermentation inhibitors formed during hydrothermal treatment and following SSF of wheat straw

A pilot plant for hydrothermal treatment of wheat straw was compared in reactor systems of two steps (first, 80°C; second, 190–205°C) and of three steps (first, 80°C; second, 170–180°C; third, 195°C). Fermentation (SSF) with Sacharomyces cerevisiae of the pretreated fibers and hydrolysate from the two-step system gave higher ethanol yield (64–75%) than that obtained from the three-step system (61–65%), due to higher enzymatic cellulose convertibility. At the optimal conditions (two steps, 195°C for 6 min), 69% of available C6-sugar could be fermented into ethanol with a high hemicellulose recovery (65%). The concentration of furfural obtained during the pretreatment process increased versus temperature from 50 mg/l at 190°C to 1,200 mg/l at 205°C as a result of xylose degradation. S. cerevisiae detoxified the hydrolysates by degradation of several toxic compounds such as 90–99% furfural and 80–100% phenolic aldehydes, which extended the lag phase to 5 h. Acetic acid concentration increased by 0.2–1 g/l during enzymatic hydrolysis and 0–3.4 g/l during fermentation due to hydrolysis of acetyl groups and minor xylose degradation. Formic acid concentration increased by 0.5–1.5 g/l probably due to degradation of furfural. Phenolic aldehydes were oxidized to the corresponding acids during fermentation reducing the inhibition level.     

Improved homo <Emphasis Type="SmallCaps">l</Emphasis>-lactic acid fermentation from xylose by abolishment of the phosphoketolase pathway and enhancement of the pentose phosphate pathway in genetically modified xylose-assimilating <Emphasis Type="Italic">Lactococcus lactis</Emphasis>

In order to achieve efficient homo L-lactic acid fermentation from xylose, we first carried out addition of xylose assimilation ability to Lactococcus lactis IL 1403 by introducing a plasmid carrying the xylRAB genes from L. lactis IO-1 (pXylRAB). Then modification of xylose assimilation pathway was carried out. L. lactis has two pathways for xylose assimilation called the phosphoketolase pathway (PK pathway) that produces both lactic acid and acetic acid and the pentose phosphate pathway (PP pathway) that produces only lactic acid as a final product. Thus a mutant strain that disrupted its phosphokeolase gene (ptk) was constructed. The Δptk mutant harboring pXylRAB lacked the PK pathway and produced predominantly lactic acid from xylose via the PP pathway, although its fermentation rate slightly decreased. Further introduction of the transketolase gene (tkt) to disrupted ptk locus led restoration of fermentation rate and this was attributed to enhancement of the PP pathway. As a result, ptk::tkt strain harboring pXylRAB produced 50.1 g/l of L-lactic acid from xylose with a high optical purity of 99.6% and a high yield of 1.58 (moles per mole xylose consumed) that is close to theoretical value of 1.67 from xylose.     

Fermentation of lignocellulosic sugars to acetic acid by <Emphasis Type="Italic">Moorella thermoacetica</Emphasis>

A systematic study of bioconversion of lignocellulosic sugars to acetic acid by Moorella thermoacetica (strain ATCC 39073) was conducted. Four different water-soluble fractions (hydrolysates) obtained after steam pretreatment of lignocellulosic biomass were selected and fermented to acetic acid in batch fermentations. M. thermoacetica can effectively ferment xylose and glucose in hydrolysates from wheat straw, forest residues, switchgrass, and sugarcane straw to acetic acid. Xylose and glucose were completely utilized, with xylose being consumed first. M. thermoacetica consumed up to 62 % of arabinose, 49 % galactose and 66 % of mannose within 72 h of fermentation in the mixture of lignocellulosic sugars. The highest acetic acid yield was obtained from sugarcane straw hydrolysate, with 71 % of theoretical yield based on total sugars (17 g/L acetic acid from 24 g/L total sugars). The lowest acetic acid yield was observed in forest residues hydrolysate, with 39 % of theoretical yield based on total sugars (18 g/L acetic acid from 49 g/L total sugars). Process derived compounds from steam explosion pretreatment, including 5-hydroxymethylfurfural (0.4 g/L), furfural (0.1 g/L) and total phenolics (3 g/L), did not inhibit microbial growth and acetic acid production yield. This research identified two major factors that adversely affected acetic acid yield in all hydrolysates, especially in forest residues: (i) glucose to xylose ratio and (ii) incomplete consumption of arabinose, galactose and mannose. For efficient bioconversion of lignocellulosic sugars to acetic acid, it is imperative to have an appropriate balance of sugars in a hydrolysate. Hence, the choice of lignocellulosic biomass and steam pretreatment design are fundamental steps for the industrial application of this process.     

Conversion of glucose‐xylose mixtures to pyruvate using a consortium of metabolically engineered Escherichia coli

Two strains of Escherichia coli were engineered to accumulate pyruvic acid from two sugars found in lignocellulosic hydrolysates by knockouts in the aceE, ppsA, poxB, and ldhA genes. Additionally, since glucose and xylose are typically consumed sequentially due to carbon catabolite repression in E. coli, one strain (MEC590) was engineered to grow only on glucose while a second strain (MEC589) grew only on xylose. On a single substrate, each strain generated pyruvate at a yield of about 0.60 g/g in both continuous culture and batch culture. In a glucose‐xylose mixture under continuous culture, a consortium of both strains maintained a pyruvate yield greater than 0.60 g/g when three different concentrations of glucose and xylose were sequentially fed into the system. In a fed‐batch process, both sugars in a glucose‐xylose mixture were consumed simultaneously to accumulate 39 g/L pyruvate in less than 24 h at a yield of 0.59 g/g.     

Optimization of acid hydrolysis from the hemicellulosic fraction of Eucalyptus grandis residue using response surface methodology

Biotechnological conversion of biomass into fuels and chemicals requires hydrolysis of the polysaccharide fraction into monomeric sugars. Hydrolysis can be performed enzymatically and with dilute or concentrate mineral acids. The present study used dilute sulfuric acid as a catalyst for hydrolysis of Eucalyptus grandis residue. The purpose of this paper was to optimize the hydrolysis process in a 1.4 l pilot-scale reactor and investigate the effects of the acid concentration, temperature and residue/acid solution ratio on the hemicellulose removal and consequently on the production of sugars (xylose, glucose and arabinose) as well as on the formation of by-products (furfural, 5-hydroxymethylfurfural and acetic acid). This study was based on a model composition corresponding to a 2(3) orthogonal factorial design and employed the response surface methodology (RSM) to optimize the hydrolysis conditions, aiming to attain maximum xylose extraction from hemicellulose of residue. The considered optimum conditions were: H(2)SO(4) concentration of 0.65%, temperature of 157 degrees C and residue/acid solution ratio of 1/8.6 with a reaction time of 20 min. Under these conditions, 79.6% of the total xylose was removed and the hydrolysate contained 1.65 g/l glucose, 13.65 g/l xylose, 1.55 g/l arabinose, 3.10 g/l acetic acid, 1.23 g/l furfural and 0.20 g/l 5-hydroxymethylfurfural.     

Bioconversion of waste office paper to L(+)-lactic acid by the filamentous fungus Rhizopus oryzae

L(+)-lactic acid production was investigated using an enzymatic hydrolysate of waste office automation (OA) paper in a culture of the filamentous fungus Rhizopus oryzae. In 4 d culture, 82.8 g/l glucose, 7 g/l xylose, and 3.4 g/l cellobiose contained in the hydrolysate were consumed to produce 49.1 g/l of lactic acid. The lactic acid yield and production rate were only 0.59 g/g and 16.3 g/l/d, respectively, only 75% and 61% of the results from the glucose medium. The low production rate from waste OA hydrolysate was elucidated by trials using xylose as the sole carbon source; in those trials, the lactic acid production rate was 7.3 g/l/d, only 28% that of glucose or cellobiose. The low lactic acid yield from waste OA hydrolysate was clarified by trials using artificial hydrolysates comprised of 7:2:1 or 7:1:2 ratios of glucose:cellobiose:xylose. For both, the lactic acid production rate of 17.4 g/l/d matched that of waste OA paper, while the lactic acid yield was similar to that of the glucose medium. This indicates that the production rate may be inhibited by xylose derived from hemicellulose, and the yield may be inhibited by unknown compounds derived from paper pulp.     

Butanol production by Clostridium beijerinckii ATCC 55025 from wheat bran

Wheat bran, a by-product of the wheat milling industry, consists mainly of hemicellulose, starch and protein. In this study, the hydrolysate of wheat bran pretreated with dilute sulfuric acid was used as a substrate to produce ABE (acetone, butanol and ethanol) using Clostridium beijerinckii ATCC 55025. The wheat bran hydrolysate contained 53.1 g/l total reducing sugars, including 21.3 g/l of glucose, 17.4 g/l of xylose and 10.6 g/l of arabinose. C. beijerinckii ATCC 55025 can utilize hexose and pentose simultaneously in the hydrolysate to produce ABE. After 72 h of fermentation, the total ABE in the system was 11.8 g/l, of which acetone, butanol and ethanol were 2.2, 8.8 and 0.8 g/l, respectively. The fermentation resulted in an ABE yield of 0.32 and productivity of 0.16 g l⁻¹ h⁻¹. This study suggests that wheat bran can be a potential renewable resource for ABE fermentation.     

Biomimetic catalysis for hemicellulose hydrolysis in corn stover

Efficient and economical hydrolysis of plant cell wall polysaccharides into monomeric sugars is a significant technical hurdle in biomass processing for renewable fuels and chemicals. One possible approach to overcoming this hurdle is a biomimetic approach with dicarboxylic acid catalyst mimicking the catalytic core microenvironment in natural enzymes. This paper reports developments in the use of a dicarboxylic acid catalyst, maleic acid, for hemicellulose hydrolysis in corn stover. Hemicellulose hydrolysis and xylose degradation kinetics in the presence of maleic acid was compared to sulfuric acid. At optimized reaction conditions for each acid, maleic acid hydrolysis results in minimal xylose degradation, whereas sulfuric acid causes 3-10 times more xylose degradation. These results formed the basis for optimizing the hydrolysis of hemicellulose from corn stover using maleic acid. At 40 g/L dry corn stover solid-loading, both acid catalysts can achieve near-quantitative monomeric xylose yield. At higher solids loadings (150-200 g dry stover per liter), sulfuric acid catalyzed hydrolysis results in more than 30% degradation of the xylose, even under the previously reported optimal condition. However, as a result of minimized xylose degradation, optimized biomimetic hydrolysis of hemicellulose by maleic acid can reach approximately 95% monomeric xylose yields with trace amounts of furfural. Fermentation of the resulting unconditioned hydrolysate by recombinant S. cerevisiae results in 87% of theoretical ethanol yield. Enzyme digestibility experiments on the residual corn stover solids show that >90% yields of glucose can be produced in 160 h from the remaining cellulose with cellulases (15 FPU/g-glucan).     

Ethanol production from eucalyptus wood hemicellulose hydrolysate by Pichia stipitis

Ethanol production was evaluated from eucalyptus wood hemicellulose acid hydrolysate using Pichia stipitis NRRL Y-7124. An initial lag phase characterized by flocculation and viability loss of the yeast inoculated was observed. Subsequently, cell regrowth occurred with sequential consumption of sugars and production of ethanol. Polyol formation was detected. Acetic acid present in the hydrolysate was an important inhibitor of the fermentation, reducing the rate and the yield. Its toxic effect was due essentially to its undissociated form. The fermentation was more effective at an oxygen transfer rate between 1.2 and 2.4 mmol/L h and an initial pH of 6.5. The hydrolysate used in the experiences had the following composition (expressed in grams per liter): xylose 30, arabinose 2.8, glucose 1.5, galactose 3.7, mannose 1.0, cellobiose 0.5, acetic acid 10, glucuronic acid 1.5, and galacturonic acid 1.0. The best values obtained were maximum ethanol concentration 12.6 g/L, fermentation time 75 h, fermentable sugar consumption 99% ethanol yield 0.35 g/g sugars consumed, and volumetric ethanol productivity 4 g/L day. (c) 1992 John Wiley & Sons, Inc.     

Fermentative production of<Emphasis Type="SmallCaps"> l</Emphasis>-(+)-lactic acid by an alkaliphilic marine microorganism

Of six strains of lactic acid-producing alkaliphilic microorganisms, Halolactibacillus halophilus was most efficient. It produced the highest concentration and yield of lactic acid, with minimal amounts of acetic and formic acid when sucrose and glucose were used as substrate. Mannose and xylose were poorly utilized. In batch fermentation at 30°C, pH 9 with 4 and 8% (w/v) sucrose, lactic acid was produced at 37.7 and 65.8 g l⁻¹, with yields of 95 and 83%, respectively. Likewise, when 4 and 8% (w/v) glucose were used, 33.4 and 59.6 g lactic acid l⁻¹ were produced with 85 and 76% yields, respectively. l-(+)-lactic acid had an optical purity of 98.8% (from sucrose) and 98.3% (from glucose).     

<Emphasis Type="SmallCaps">l</Emphasis>(+)-Lactic acid production by co-fermentation of glucose and xylose with <Emphasis Type="Italic">Rhizopus oryzae</Emphasis> obtained by low-energy ion beam irradiation

Low-energy ion beam irradiation (10–200 keV) has been proved to have a wide range of biological effects in recent years. When Rhizopus oryzae PW352 was irradiated with a 15-keV low-energy ion beam an l(+)-lactic acid high-yield mutant, RQ4015, was obtained. When 150 g/l glucose was used as the sole carbon source, l(+)-lactic acid of RQ4015 reached 121 g/l after 36 h shake-flask cultivation. However, the highest lactic acid concentration 74 g/l was obtained when 100 g/l xylose was present in the medium as the sole carbon source. When mixed xylose (25 g/l) and glucose (75 g/l) were present in a bubble column, l(+)-lactic acid production of RQ4015 reached 83 g. A high mutation rate and a wide mutation spectrum of low-energy ion implantation were observed in the experiment, suggesting that ion implantation can be a highly efficient mutagenic means for microorganism breeding in many commercial applications.     

Improved bioconversion of lignocellulosic biomass by Saccharomyces cerevisiae engineered for tolerance to acetic acid

Lignocellulosic biomass has considerable potential for the production of fuels and chemicals as a promising alternative to conventional fossil fuels. However, the bioconversion of lignocellulosic biomass to desired products must be improved to reach economic viability. One of the main technical hurdles is the presence of inhibitors in biomass hydrolysates, which hampers the bioconversion efficiency by biorefinery microbial platforms such as Saccharomyces cerevisiae in terms of both production yields and rates. In particular, acetic acid, a major inhibitor derived from lignocellulosic biomass, severely restrains the performance of engineered xylose‐utilizing S. cerevisiae strains, resulting in decreased cell growth, xylose utilization rate, and product yield. In this study, the robustness of XUSE, one of the best xylose‐utilizing strains, was improved for the efficient conversion of lignocellulosic biomass into bioethanol under the inhibitory condition of acetic acid stress. Through adaptive laboratory evolution, we successfully developed the evolved strain XUSAE57, which efficiently converted xylose to ethanol with high yields of 0.43–0.50 g ethanol/g xylose even under 2–5 g/L of acetic stress. XUSAE57 not only achieved twofold higher ethanol yields but also improved the xylose utilization rate by more than twofold compared to those of XUSE in the presence of 4 g/L of acetic acid. During fermentation of lignocellulosic hydrolysate, XUSAE57 simultaneously converted glucose and xylose with the highest ethanol yield reported to date (0.49 g ethanol/g sugars). This study demonstrates that the bioconversion of lignocellulosic biomass by an engineered strain could be significantly improved through adaptive laboratory evolution for acetate tolerance, which could help realize the development of an economically feasible lignocellulosic biorefinery to produce fuels and chemicals.