Cloning, Nucleotide Sequence, and Expression of the Gene Encoding the Bacteriocin Boticin B from Clostridium botulinum Strain 213B

Boticin B is a heat-stable bacteriocin produced by Clostridium botulinum strain 213B that has inhibitory activity against various strains of C. botulinum and related clostridia. The gene encoding the bacteriocin was localized to a 3.0-kb HindIII fragment of an 18.8-kb plasmid, cloned, and sequenced. DNA sequencing revealed the boticin B structural gene, btcB, to be an open reading frame encoding 50 amino acids. A C. botulinum strain 62A transconjugant containing the HindIII fragment inserted into a clostridial shuttle vector expressed boticin B, although at much lower levels than those observed in C. botulinum 213B. To our knowledge, this is the first demonstration and characterization of a bacteriocin from toxigenic group I C. botulinum.     

Properties of F′ Factor Deoxyribonucleic Acid Transferred from Ultraviolet-Irradiated Donors: Photoreactivation in the Recipient and the Influence of recA, recB, recC, and uvr Genes

The bacteriocin, boticin E, was produced by only a few strains of those clostridia which are nontoxigenic but otherwise identical to Clostridium botulinum type E. Boticin preparations from four different strains had identical spectra against indicator cultures. Experiments with bacterial lawns showed boticin to be sporostatic for all tested nonproteolytic C. botulinum (types B, E, and F) and nontoxigenic type E-related strains which included the producing strains as well as those different from type E in the fermentation of one to three carbohydrates. Boticin had no detectable effect on vegetative cells of boticinogenic strains but killed those of all other strains whose spores were sensitive. Cultures that were growing in an agar medium were more sensitive to the bacteriocin than those growing in broth. Vegetative cells of indicator strains adsorbed boticin, but cells of a boticin-resistant mutant did not. Boticin did not lyse suspensions of vegetative cells which had been killed previously by exposure to air but lysed actively growing protoplasts and L-forms of a strain whose normal vegetative cells are susceptible to lysis. Sporostasis resulted from inhibition of germination rather than of outgrowth. Proteolytic strains of C. botulinum (types A, B, and F) were resistant to boticin E.     

Atypical genetic locus associated with constitutive production of enterocin B by Enterococcus faecium BFE 900

A purified bacteriocin produced by Enterococcus faecium BFE 900 isolated from black olives was shown by Edman degradation and mass spectrometric analyses to be identical to enterocin B produced by E. faecium T136 from meat (P. Casaus, T. Nilsen, L. M. Cintas, I. F. Nes, P. E. Hernández, and H. Holo, Microbiology 143:2287-2294, 1997). The structural gene was located on a 2.2-kb HindIII fragment and a 12.0-kb EcoRI chromosomal fragment. The genetic characteristics and production of EntB by E. faecium BFE 900 differed from that described so far by the presence of a conserved sequence like a regulatory box upstream of the EntB gene, and its production was constitutive and not regulated. The 2.2-kb chromosomal fragment contained the hitherto undetected immunity gene for EntB in an atypical orientation that is the reverse of that of the structural gene. Typical transport and other genes associated with bacteriocin production were not detected on the 12.0-kb chromosomal fragment containing the EntB structural gene. This makes the EntB genetic system different from most other bacteriocin systems, where transport and possible regulatory genes are clustered. EntB was subcloned and expressed by the dedicated secretion machinery of Carnobacterium piscicola LV17A. The structural gene was amplified by PCR, fused to the divergicin A signal peptide, and expressed by the general secretory pathway in Enterococcus faecalis ATCC 19433.     

Design and use of synthetic oligonucleotide probes in the cloning of delta-endotoxin genes from Bacillus thuringiensis.

A detailed protocol is described for the design and use of synthetic oligonucleotide probes for screening DNA libraries from Bacillus thuringiensis var. kurstaki (strain HD191) for copies of the gene (tox) encoding the insecticidal delta-endotoxin. Two homologous tox genes were identified in this organism; one of these was located on a 75-kb plasmid and the other on a second large plasmid or the bacterial chromosome. A tox gene was isolated as a 6.5-kb HindIII fragment of B. thuringiensis plasmid DNA.     

Purification and Some Properties of Two Boticins

Two bacteriocins (boticins) were elaborated without induction by strain S5, a nontoxigenic variant of Clostridium botulinum type E. After separation of the two active entities by gel filtration on Sephadex G-50, a large particle with boticin activity was isolated by density gradient ultracentrifugation, and a small soluble boticin was purified by continuous curtain electrophoresis and chromatography on sulfoethyl-Sephadex. Large and small boticins were purified 200- and 3,000-fold, respectively, with yields of 50% or more. The small boticin, a basic substance with molecular weight under 30,000, was the predominant species; the large boticin, a negatively charged particle with particle weight greater than 40 x 10(6), represented less than 20% of the total activity. Both purified boticins were resistant to heat and were attacked by proteolytic enzymes, but the large boticin was less thermostable and less sensitive to proteolytic enzymes than was the smaller variety. The activity of the large boticin was not reduced by treatment with urea or deoxyribonuclease. Both boticins exhibited sporostatic and bactericidal activities for C. botulinum type E, strain 070. A suspension of type E strain 070 vegetative cells was rendered nonviable within 9 min by the small boticin. The lethal action of this bacteriocin was not reversed by trypsin.     

Cloning, sequencing, and expression in Escherichia coli of lcnB, a third bacteriocin determinant from the lactococcal bacteriocin plasmid p9B4-6.

On the bacteriocin plasmid p9B4-6 of Lactococcus lactis subsp. cremoris 9B4, a third bacteriocin determinant was identified. The genes encoding bacteriocin production and immunity resided on a 1.2-kb CelII-ScaI fragment and were located adjacent to one of two previously identified bacteriocin operons (M. J. van Belkum, B. J. Hayema, R. E. Jeeninga, J. Kok, and G. Venema, Appl. Environ. Microbiol. 57:492-498, 1991). The fragment was sequenced and analyzed by deletion and mutation analyses. The bacteriocin determinant consisted of two genes which were transcribed as an operon. The first gene (lcnB), containing 68 codons, was involved in bacteriocin activity. The second gene (lciB) contained 91 codons and was responsible for immunity. The specificity of this novel bacteriocin, designated lactococcin B, was different from that of the other two bacteriocins specified by p9B4-6. Part of the nucleotide sequence of the lactococcin B operon was similar to a nucleotide sequence also found in the two other bacteriocin operons of p9B4-6. This conserved region encompassed a nucleotide sequence upstream of the bacteriocin gene and the 5' part of the gene. When the lactococcin B operon was expressed in Escherichia coli by using a T7 RNA polymerase-specific promoter, antagonistic activity could be detected.     

Cloning, sequencing, and expression in Escherichia coli of lcnB, a third bacteriocin determinant from the lactococcal bacteriocin plasmid p9B4-6.

On the bacteriocin plasmid p9B4-6 of Lactococcus lactis subsp. cremoris 9B4, a third bacteriocin determinant was identified. The genes encoding bacteriocin production and immunity resided on a 1.2-kb CelII-ScaI fragment and were located adjacent to one of two previously identified bacteriocin operons (M. J. van Belkum, B. J. Hayema, R. E. Jeeninga, J. Kok, and G. Venema, Appl. Environ. Microbiol. 57:492-498, 1991). The fragment was sequenced and analyzed by deletion and mutation analyses. The bacteriocin determinant consisted of two genes which were transcribed as an operon. The first gene (lcnB), containing 68 codons, was involved in bacteriocin activity. The second gene (lciB) contained 91 codons and was responsible for immunity. The specificity of this novel bacteriocin, designated lactococcin B, was different from that of the other two bacteriocins specified by p9B4-6. Part of the nucleotide sequence of the lactococcin B operon was similar to a nucleotide sequence also found in the two other bacteriocin operons of p9B4-6. This conserved region encompassed a nucleotide sequence upstream of the bacteriocin gene and the 5' part of the gene. When the lactococcin B operon was expressed in Escherichia coli by using a T7 RNA polymerase-specific promoter, antagonistic activity could be detected.     

Essential structure in the cloned transforming DNA that induces gene amplification of the Bacillus subtilis amyE-tmrB region.

Bacillus subtilis B7, a mutant which acquired gene amplification of the amyE-tmrB region, showed, as a result, hyperproductivity (about a 5- to 10-fold increase) of alpha-amylase and tunicamycin resistance. The mutational character was transferred to recipient cells by competence transformation. A 14-kilobase (kb) EcoRI chromosomal DNA fragment of strain B7 was found to have the transforming activity. We cloned a 6.4-kb EcoRI fragment on a phage vector lambda Charon 4A through a spontaneous deletion of 7.6 kb from the 14-kb fragment and subcloned a 1.6-kb HindIII fragment on pGR71. The cloned 6.4-kb EcoRI and 1.6-kb HindIII fragments retained the transforming activity of inducing gene amplification of the amyE-tmrB region. At the junction point (J) of the repeating units (16 kb), the tmrB gene was linked to a DNA region (M) located 4 kb upstream of amyE. The essential structure of the cloned, transforming (gene amplification-inducing) DNA was deduced to be that around J. The subcloned 1.6-kb HindIII fragment that retained the transforming activity was shown to be almost solely composed of the tmrB-J-M region. In addition, the DNA sequence around J was determined.     

Molecular cloning of the Clostridium botulinum structural gene encoding the type B neurotoxin and determination of its entire nucleotide sequence.

DNA fragments derived from the Clostridium botulinum type A neurotoxin (BoNT/A) gene (botA) were used in DNA-DNA hybridization reactions to derive a restriction map of the region of the C. botulinum type B strain Danish chromosome encoding botB. As the one probe encoded part of the BoNT/A heavy (H) chain and the other encoded part of the light (L) chain, the position and orientation of botB relative to this map were established. The temperature at which hybridization occurred indicated that a higher degree of DNA homology occurred between the two genes in the H-chain-encoding region. By using the derived restriction map data, a 2.1-kb BglII-XbaI fragment encoding the entire BoNT/B L chain and 108 amino acids of the H chain was cloned and characterized by nucleotide sequencing. A contiguous 1.8-kb XbaI fragment encoding a further 623 amino acids of the H chain was also cloned. The 3' end of the gene was obtained by cloning a 1.6-kb fragment amplified from genomic DNA by inverse polymerase chain reaction. Translation of the nucleotide sequence derived from all three clones demonstrated that BoNT/B was composed of 1,291 amino acids. Comparative alignment of its sequence with all currently characterized BoNTs (A, C, D, and E) and tetanus toxin (TeTx) showed that a wide variation in percent homology occurred dependent on which component of the dichain was compared. Thus, the L chain of BoNT/B exhibits the greatest degree of homology (50% identity) with the TeTx L chain, whereas its H chain is most homologous (48% identity) with the BoNT/A H chain. Overall, the six neurotoxins were shown to be composed of highly conserved amino acid domains interceded with amino acid tracts exhibiting little overall similarity. In total, 68 amino acids of an average of 442 are absolutely conserved between L chains and 110 of 845 amino acids are conserved between H chains. Conservation of Trp residues (one in the L chain and nine in the H chain) was particularly striking. The most divergent region corresponds to the extreme carboxy terminus of each toxin, which may reflect differences in specificity of binding to neurone acceptor sites.     

Molecular cloning of the Clostridium botulinum structural gene encoding the type B neurotoxin and determination of its entire nucleotide sequence.

DNA fragments derived from the Clostridium botulinum type A neurotoxin (BoNT/A) gene (botA) were used in DNA-DNA hybridization reactions to derive a restriction map of the region of the C. botulinum type B strain Danish chromosome encoding botB. As the one probe encoded part of the BoNT/A heavy (H) chain and the other encoded part of the light (L) chain, the position and orientation of botB relative to this map were established. The temperature at which hybridization occurred indicated that a higher degree of DNA homology occurred between the two genes in the H-chain-encoding region. By using the derived restriction map data, a 2.1-kb BglII-XbaI fragment encoding the entire BoNT/B L chain and 108 amino acids of the H chain was cloned and characterized by nucleotide sequencing. A contiguous 1.8-kb XbaI fragment encoding a further 623 amino acids of the H chain was also cloned. The 3' end of the gene was obtained by cloning a 1.6-kb fragment amplified from genomic DNA by inverse polymerase chain reaction. Translation of the nucleotide sequence derived from all three clones demonstrated that BoNT/B was composed of 1,291 amino acids. Comparative alignment of its sequence with all currently characterized BoNTs (A, C, D, and E) and tetanus toxin (TeTx) showed that a wide variation in percent homology occurred dependent on which component of the dichain was compared. Thus, the L chain of BoNT/B exhibits the greatest degree of homology (50% identity) with the TeTx L chain, whereas its H chain is most homologous (48% identity) with the BoNT/A H chain. Overall, the six neurotoxins were shown to be composed of highly conserved amino acid domains interceded with amino acid tracts exhibiting little overall similarity. In total, 68 amino acids of an average of 442 are absolutely conserved between L chains and 110 of 845 amino acids are conserved between H chains. Conservation of Trp residues (one in the L chain and nine in the H chain) was particularly striking. The most divergent region corresponds to the extreme carboxy terminus of each toxin, which may reflect differences in specificity of binding to neurone acceptor sites.     

Cloning of two bacteriocin genes from a lactococcal bacteriocin plasmid.

Lactococcus lactis subsp. cremoris 9B4 plasmid p9B4-6 (60 kilobases [kb]), which specifies bacteriocin production and immunity, was analyzed with restriction endonucleases, and fragments of this plasmid were cloned into shuttle vectors based on the broad-host-range plasmid pWVO1. Two regions on p9B4-6 were identified which specify inhibitory activity on L. lactis indicator strains: one that could be confined to a 1.8-kb ScaI-ClaI fragment with low antagonistic activity and a 15-kb XbaI-SalI fragment specifying high antagonistic activity. The inhibitory substances produced by these two clones were sensitive to proteolysis. A 4-kb HindIII fragment derived from the 15-kb fragment strongly hybridized with the 1.8-kb fragment. The antagonistic activity specified by the 4-kb fragment was somewhat reduced as compared with that of the 15-kb fragment. A 1.3-kb ScaI-HindIII subfragment of the 4-kb fragment contained both the immunity and bacteriocin genes. Inhibition studies showed that the two bacteriocins had different specificities.     

Cloning of two bacteriocin genes from a lactococcal bacteriocin plasmid

Lactococcus lactis subsp. cremoris 9B4 plasmid p9B4-6 (60 kilobases [kb]), which specifies bacteriocin production and immunity, was analyzed with restriction endonucleases, and fragments of this plasmid were cloned into shuttle vectors based on the broad-host-range plasmid pWVO1. Two regions on p9B4-6 were identified which specify inhibitory activity on L. lactis indicator strains: one that could be confined to a 1.8-kb ScaI-ClaI fragment with low antagonistic activity and a 15-kb XbaI-SalI fragment specifying high antagonistic activity. The inhibitory substances produced by these two clones were sensitive to proteolysis. A 4-kb HindIII fragment derived from the 15-kb fragment strongly hybridized with the 1.8-kb fragment. The antagonistic activity specified by the 4-kb fragment was somewhat reduced as compared with that of the 15-kb fragment. A 1.3-kb ScaI-HindIII subfragment of the 4-kb fragment contained both the immunity and bacteriocin genes. Inhibition studies showed that the two bacteriocins had different specificities.     

Cloning and expression of the exfoliative toxin B gene from Staphylococcus aureus.

Exfoliative toxin type B is produced by bacteriophage group II strains of Staphylococcus aureus and is a causative agent of staphylococcal scalded-skin syndrome. In addition to exfoliative toxin B, most isolates also produce a bacteriocin and are immune to the action of the bacteriocin. These phenotypes, as well as resistance to cadmium, were lost after elimination of a 37.5-kilobase plasmid, pRW001, from S. aureus UT0007. Transduction and transformation showed that pRW001 carries the structural genes for four phenotypic characteristics of S. aureus UT0007: (i) exfoliative toxin B production, (ii) bacteriocin production, (iii) bacteriocin immunity, and (iv) resistance to Cd(NO3)2. The exfoliative toxin B structural gene (etb), which is located on a 1.7-kilobase HindIII fragment of pRW001, was cloned in the plasmid pDH5060 and transformed into phage group III S. aureus RN4220. Transformant clones produced extracellular exfoliative toxin B that was biologically active in the neonatal mouse assay. In the Escherichia coli genetic background, the exfoliative toxin B gene was expressed only after being cloned into the positive selection-expression vector pSCC31. The structural gene for cadmium resistance was also isolated on an HindIII fragment of pRW001 cloned in pDH5060. The loci for the exfoliative toxin B gene and the cadmium resistance gene(s) were identified on a restriction map of plasmid pRW001.     

Structural Changes in Clostridium botulinum Type E After Treatment with Boticin S51

Treatment with boticin S5(1), a bacteriocin produced by a nontoxigenic organism closely related to Clostridium botulinum type E, caused extensive changes in the structure of a sensitive C. botulinum type E strain. Nucleoid deoxyribonucleic acid, normally seen as fine filaments scattered throughout the cell, was aggregated into dense deoxyribonucleic acid masses. Mesosomes appeared to undergo structural rearrangement from lamellar to vesicular configuration. Eventual dissolution of cell contents left bacterial ghosts composed of seemingly intact cell walls with remnants of the cytoplasmic membrane and internal structures. The morphological changes observed in boticin-treated strain 070 cells were very similar to those produced by a bacteriocin-like substance from phage type 71 Staphylococcus aureus on sensitive beta-hemolytic streptococci. A similarity in the mode of action of the two bactericidal agents is suggested.     

Physical characterization of katG, encoding catalase HPI of Escherichia coli

The gene encoding the bifunctional catalase-peroxidase HPI from Escherichia coli was located on a 3.8-kb HindIII fragment of the Clarke and Carbon plasmid pLC36-19 using transposon Tn5 insertions. This fragment was subcloned into the HindIII site of pAT153 to create pBT22. The size of the insert was reduced by BAL 31 digestion of one end to an apparent minimum size for catalase expression of approx. 2.5 kb as determined by complementation and expression in maxicell strains. Further reduction in size or digestion from the opposite end inactivated the gene. The location and orientation of the promoter at the 0 kb end of the insert in pBT22 was confirmed by cloning a 320-bp BglII fragment into the promoter-cloning vector pKK232-8. Differences in the Southern blots of genomic DNA from a wild-type strain and a katG17::Tn10 mutant digested with HincII and probed with pBT22 confirmed that the transposon previously mapped in katG was located in the 2.5-kb coding region for HPI.     

Molecular cloning, characterization, and nucleotide sequence of the rfc gene, which encodes an O-antigen polymerase of Salmonella typhimurium.

The rfc gene of Salmonella typhimurium was located in a 1.75-kb HindIII fragment and restored wild-type lipopolysaccharide synthesis ability to both an older rfc point mutant and new rfc::IS10 mutants. DNA sequencing of the HindIII fragment revealed an open reading frame which could encode a protein of 407 amino acids with an Mr of 47,472 and also revealed potential translation signals. Modulator codons accounted for 12.5% of the total codon content, providing a possible explanation for the nondetectability of the protein in subcellular systems. Secondary structure analysis suggested the presence of transmembrane beta-sheet structures, implying a possible role for the protein in translocation of hydrophilic O-antigen-containing materials. Salmonella strains of groups A, B, and D1 contained rfc-homologous DNA, but strains of groups C1, C2, C3, D2, and E2 did not.     

Characterization of the protein conferring immunity to the antimicrobial peptide carnobacteriocin B2 and expression of carnobacteriocins B2 and BM1.

Cloning of a 16-kb DNA fragment from the 61-kb plasmid of Carnobacterium piscicola LV17B into plasmidless C. piscicola LV17C restores the production of the plasmid-encoded carnobacteriocin B2 and the chromosomally-encoded carnobacteriocin BM1 and restores the immune phenotype. This fragment also has sufficient genetic information to allow the expression of carnobacteriocin B2 and its immunity in a heterologous host. The gene locus (cbiB2) responsible for immunity to carnobacteriocin B2 is located downstream of the structural gene for carnobacteriocin B2 and encodes a protein of 111 amino acids (CbiB2). CbiB2 was expressed in Escherichia coli as a fusion of the maltose-binding protein and CbiB2. The fusion protein was purified on an amylose column and cleaved with factor Xa, and pure CbiB2 was isolated by high-performance liquid chromatography. The N-terminal amino acid sequence and mass spectrometry (molecular weight [mean +/- standard error], 12,662.2 +/- 3.4) of the purified protein agree with the information deduced from the nucleotide sequence of cbiB2. Western blot (immunoblot) analysis indicates that the majority of the intracellular pool of this immunity protein is in the cytoplasm and that a smaller proportion is associated with the membrane. CbiB2 confers immunity to carnobacteriocin B2, but not to carnobacteriocin BM1, when it is expressed in homologous or heterologous hosts. No protective effect is observed for sensitive cells growing in the presence of the bacteriocin when the immunity protein is added to the medium. The purified immunity protein does not show significant binding to microtiter plates coated with carnobacteriocin B2 and is not able to inactivate the bacteriocin in solution.     

Atypical Genetic Locus Associated with Constitutive Production of Enterocin B by Enterococcus faecium BFE 900

A purified bacteriocin produced by Enterococcus faecium BFE 900 isolated from black olives was shown by Edman degradation and mass spectrometric analyses to be identical to enterocin B produced by E. faecium T136 from meat (P. Casaus, T. Nilsen, L. M. Cintas, I. F. Nes, P. E. Hernández, and H. Holo, Microbiology 143:2287–2294, 1997). The structural gene was located on a 2.2-kb HindIII fragment and a 12.0-kb EcoRI chromosomal fragment. The genetic characteristics and production of EntB by E. faecium BFE 900 differed from that described so far by the presence of a conserved sequence like a regulatory box upstream of the EntB gene, and its production was constitutive and not regulated. The 2.2-kb chromosomal fragment contained the hitherto undetected immunity gene for EntB in an atypical orientation that is the reverse of that of the structural gene. Typical transport and other genes associated with bacteriocin production were not detected on the 12.0-kb chromosomal fragment containing the EntB structural gene. This makes the EntB genetic system different from most other bacteriocin systems, where transport and possible regulatory genes are clustered. EntB was subcloned and expressed by the dedicated secretion machinery of Carnobacterium piscicola LV17A. The structural gene was amplified by PCR, fused to the divergicin A signal peptide, and expressed by the general secretory pathway in Enterococcus faecalis ATCC 19433.