Early events in the disulfide-coupled folding of BPTI.

Recent studies of the refolding of reduced bovine pancreatic trypsin inhibitor (BPTI) have shown that a previously unidentified intermediate with a single disulfide is formed much more rapidly than any other one-disulfide species. This intermediate contains a disulfide that is present in the native protein (between Cys14 and 38), but it is thermodynamically less stable than the other two intermediates with single native disulfides. To characterize the role of the [14-38] intermediate and the factors that favor its formation, detailed kinetic and mutational analyses of the early disulfide-formation steps were carried out. The results of these studies indicate that the formation of [14-38] from the fully reduced protein is favored by both local electrostatic effects, which enhance the reactivities of the Cys14 and 38 thiols, and conformational tendencies that are diminished by the addition of urea and are enhanced at lower temperatures. At 25 degrees C and pH 7.3, approximately 35% of the reduced molecules were found to initially form the 14-38 disulfide, but the majority of these molecules then undergo intramolecular rearrangements to generate non-native disulfides, and subsequently the more stable intermediates with native disulfides. Amino acid replacements, other than those involving Cys residues, were generally found to have only small effects on either the rate of forming [14-38] or its thermodynamic stability, even though many of the same substitutions greatly destabilized the native protein and other disulfide-bonded intermediates. In addition, those replacements that did decrease the steady-state concentration of [14-38] did not adversely affect further folding and disulfide formation. These results suggest that the weak and transient interactions that are often detected in unfolded proteins and early folding intermediates may, in some cases, not persist or promote subsequent folding steps.     

(14-38, 30-51) double-disulphide intermediate in folding of bovine pancreatic trypsin inhibitor: a two-dimensional 1H nuclear magnetic resonance study

An analogue of the BPTI folding intermediate that contains only the disulphide bonds between Cys14 and Cys38 and between Cys30 and Cys51 has been prepared in Escherichia coli by protein engineering methods. The other two Cys residues of native BPTI (at positions 5 and 55) have been replaced by Ser. Essentially complete proton resonance assignments of the analogue were obtained by employing two-dimensional 1H nuclear magnetic resonance techniques. The intermediate has a more extended conformation in the N-terminal (residues 1 to 7) region and there are other differences in the C-terminal (residues 55 to 58) region. The remainder of the protein is substantially identical to native BPTI. The conformational properties of the analogue can explain several aspects of the kinetic role that the normal (14-38, 30-51) intermediate plays in the folding of BPTI.     

Folding pathway of a circular form of bovine pancreatic trypsin inhibitor

The pathway of unfolding and refolding of a circular form of bovine pancreatic trypsin inhibitor, in which the termini were linked together in a peptide bond, has been examined by trapping and identifying the disulphide-containing intermediates, as was done previously for the unmodified protein. The folding pathway of the circular protein was essentially the same as that of the unmodified inhibitor, although there were differences in the distribution of intermediates that accumulated and in the rates of some steps. The effects of the cross-link between the termini on the stabilities of the folding intermediates and the native state were determined by measuring the rates of the interconversions making up the folding transition, and comparing them with those measured for the unmodified protein. The major effect of the cross-link was to stabilize an intermediate containing two native disulphides, (30-51, 14-38), but lacking the disulphide nearest the termini, 5-55. The native conformation was not measurably stabilized by the cross-link, in spite of the expected reduction of entropy of the unfolded state, indicating that the native state of the circular protein had a slightly strained conformation. The stabilities of the major one-disulphide intermediates were not significantly affected by the cross-link, suggesting that the termini of bovine pancreatic trypsin inhibitor do not tend to interact during the early stage of folding.     

Peptide models of four possible insulin folding intermediates with two disulfides

The single-chain insulin (PIP) can spontaneously fold into native structure through preferred kinetic intermediates. During refolding, pairing of the first disulfide A20-B19 is highly specific, whereas pairing of the second disulfide is likely random because two two-disulfide intermediates have been trapped. To get more details of pairing property of the second disulfide, four model peptides of possible folding intermediates with two disulfides were prepared by protein engineering, and their properties were analyzed. The four model peptides were named [A20-B19, A7-B7]PIP, [A20-B19, A6-B7]PIP, [A20-B19, A6-A11]PIP, and [A20-B19, A7-A11]PIP according to their remaining disulfides. The four model peptides all adopt partially folded structure with moderate conformational differences. In redox buffer, the disulfides of the model peptides are more easily reduced than those of the wild-type PIP. During in vitro refolding, the reduced model peptides share similar relative folding rates but different folding yields: The refolding efficiency of the reduced [A20-B19, A7-A11]PIP is about threefold lower than that of the other three peptides. The present results indicate that the folding intermediates corresponding to the present model peptides all adopt partially folded conformation, and can be formed during PIP refolding, but the chance of forming the intermediate with disulfide [A20-B19, A7-A11] is much lower than that of forming the other three intermediates.     

Mutational analysis of the BPTI folding pathway: I. Effects of aromatic-->leucine substitutions on the distribution of folding intermediates.

The roles of aromatic residues in determining the folding pathway of bovine pancreatic trypsin inhibitor (BPTI) were analyzed mutationally by examining the distribution of disulfide-bonded intermediates that accumulated during the refolding of protein variants in which tyrosine or phenylalanine residues were individually replaced with leucine. The eight substitutions examined all caused significant changes in the intermediate distribution. In some cases, the major effect was to decrease the accumulation of intermediates containing two of the three disulfides found in the native protein, without affecting the distribution of earlier intermediates. Other substitutions, however, led to much more random distributions of the intermediates containing only one disulfide. These results indicate that the individual residues making up the hydrophobic core of the native protein make clearly distinguishable contributions to conformation and stability early in folding: The early distribution of intermediates does not appear to be determined by a general hydrophobic collapse. The effects of the substitutions were generally consistent with the structures of the major intermediates determined by NMR studies of analogs, confirming that the distribution of disulfide-bonded species is determined by stabilizing interactions within the ordered regions of the intermediates. The plasticity of the BPTI folding pathway implied by these results can be described using conformational funnels to illustrate the degree to which conformational entropy is lost at different stages in the folding of the wild-type and mutant proteins.     

Conformational restrictions on the pathway of folding and unfolding of the pancreatic trypsin inhibitor

The kinetic roles of the partially folded, intermediate protein species with two disulphide bonds in folding and unfolding of the pancreatic trypsin inhibitor have been investigated further. Formation of a second disulphide bond between Cys5 and Cys55 during refolding of the reduced inhibitor, which would yield the species with the 30–51 and 5–55 disulphide bonds and, possibly, the native-like conformation of the protein, is not significant. Instead, three other second disulphide bonds (5–14, 5–38 and 14–38) are formed approximately 10⁵ times more readily, but each of these two-disulphide species then rearranges intramolecularly to the native-like, two-disulphide intermediate. Therefore, the reduced protein does not simply form sequentially the three disulphide bonds of the native state. Unfolding of the native state takes place by the reverse of this process.The kinetic importance for folding and unfolding of this transition between two-disulphide intermediates under the conditions used here was illustrated experimentally by a modified form of the inhibitor in which the thiols of Cys14 and Cys38 were blocked irreversibly. In the folded conformation, this modified protein is more stable to unfolding than normal, but after unfolding cannot readily regain the native-like conformation, because Cys14 or Cys38 are required to be involved in disulphide bonds during the interconversion of the two-disulphide intermediates.Some conception of the conformational transitions that take place at each stage of the folding transition may be inferred from the relative propensities of the six cysteine residues to make or rearrange disulphide bonds. It is concluded that the inhibitor probably does not refold by sequential adoption of the native conformation by the unfolded polypeptide chain. Instead, it appears that essentially all elements of the native conformation are attained simultaneously in the final stage of folding, within an unstable and flexible, yet relatively compact, form of the entire polypeptide chain produced by weak interactions between groups distant in the primary structure.     

A major kinetic trap for the oxidative folding of human epidermal growth factor

The folding pathway of human epidermal growth factor (EGF) has been characterized by structural and kinetic analysis of the acid-trapped folding intermediates. Oxidative folding of the fully reduced EGF proceeds through 1-disulfide intermediates and accumulates rapidly as a single stable 2-disulfide intermediate (designated as EGF-II), which represents up to more than 85% of the total protein along the folding pathway. Among the five 1-disulfide intermediates that have been structurally characterized, only one is native, and nearly all of them are bridges by neighboring cysteines. Extensive accumulation of EGF-II indicates that it accounts for the major kinetic trap of EGF folding. EGF-II contains two of the three native disulfide bonds of EGF, Cys(14)-Cys(31) and Cys(33)-Cys(42). However, formation of the third native disulfide (Cys(6)-Cys(20)) for EGF-II is slow and does not occur directly. Kinetic analysis reveals that an important route for EGF-II to reach the native structure is via rearrangement pathway through 3-disulfide scrambled isomers. The pathway of EGF-II to attain the native structure differs from that of three major 2-disulfide intermediates of bovine pancreatic trypsin inhibitor (BPTI). The dissimilarities of folding mechanism(s) between EGF, BPTI, and hirudin are discussed in this paper.     

Major kinetic traps for the oxidative folding of leech carboxypeptidase inhibitor

The leech carboxypeptidase inhibitor (LCI) is a 66-amino acid protein, containing four disulfides that stabilize its structure. This polypeptide represents an excellent model for the study and understanding of the diversity of folding pathways in small, cysteine-rich proteins. The pathway of oxidative folding of LCI has been elucidated in this work, using structural and kinetic analysis of the folding intermediates trapped by acid quenching. Reduced and denatured LCI refolds through a rapid, sequential flow of one- and two-disulfide intermediates and reaches a rate-limiting step in which a mixture of three major three-disulfide species and a heterogeneous population of non-native four-disulfide (scrambled) isomers coexist. The three three-disulfide intermediates have been identified as major kinetic traps along the folding pathway of LCI, and their disulfide structures have been elucidated in this work. Two of them contain only native disulfide pairings, and one contains one native and two non-native disulfide bonds. The coexistence of three-disulfide kinetic traps adopting native disulfide bonds together with a significant proportion of fully oxidized scrambled isomers shows that the folding pathway of LCI features properties exhibited by both the bovine pancreatic trypsin inhibitor and hirudin, two diverse models with extreme folding characteristics. The results further demonstrate the large diversity of disulfide folding pathways.     

NMR structural characterization and computational predictions of the major intermediate in oxidative folding of leech carboxypeptidase inhibitor

The III-A intermediate constitutes the major rate-determining step in the oxidative folding of leech carboxypeptidase inhibitor (LCI). In this work, III-A has been directly purified from the folding reaction and structurally characterized by NMR spectroscopy. This species, containing three native disulfides, displays a highly native-like structure; however, it lacks some secondary structure elements, making it more flexible than native LCI. III-A represents a structurally determined example of a disulfide-insecure intermediate; direct oxidation of this species to the fully native protein seems to be restricted by the burial of its two free cysteine residues inside a native-like structure. We also show that theoretical approaches based on topological constraints predict with good accuracy the presence of this folding intermediate. Overall, the derived results suggest that, as it occurs with non-disulfide bonded proteins, native-like interactions between segments of secondary structure rather than the crosslinking of disulfide bonds direct the folding of LCI.     

The NMR structures of the major intermediates of the two-domain tick carboxypeptidase inhibitor reveal symmetry in its folding and unfolding pathways

There is a lack of experimental structural information about folding intermediates of multidomain proteins. Tick carboxypeptidase inhibitor (TCI) is a small, disulfide-rich protein consisting of two domains that fold and unfold autonomously through the formation of two major intermediates, IIIa and IIIb. Each intermediate contains three native disulfide bonds in one domain and six free cysteines in the other domain. Here we have determined the NMR structures of these two intermediates trapped and isolated at acidic pH in which they are stable and compared their structures with that of the native protein analyzed under the same conditions. Both IIIa and IIIb were found to contain a folded region that corresponds to the N- and C-terminal domains of TCI, respectively, with structures very similar to the corresponding regions of the native protein. The remainder of the polypeptide chains of the intermediates was shown to be unfolded in a random coil conformation. Solvent exchange measurements further indicated that the two protein domains are not completely independent, but affect each other in terms of dynamics and stability, in agreement with reported inhibitory activity data. The derived results provide structural evidence for symmetric TCI folding and unfolding mechanisms that converge in IIIa and IIIb and reveal the structural basis that accounts for the strong and simultaneous accumulation of both intermediates. Altogether, this work has important implications for a better understanding of the folding mechanisms of multidomain, disulfide-rich proteins.     

Oxidative folding of Amaranthus alpha-amylase inhibitor: disulfide bond formation and conformational folding

Oxidative folding is the fusion of native disulfide bond formation with conformational folding. This complex process is guided by two types of interactions: first, covalent interactions between cysteine residues, which transform into native disulfide bridges, and second, non-covalent interactions giving rise to secondary and tertiary protein structure. The aim of this work is to understand both types of interactions in the oxidative folding of Amaranthus alpha-amylase inhibitor (AAI) by providing information both at the level of individual disulfide species and at the level of amino acid residue conformation. The cystine-knot disulfides of AAI protein are stabilized in an interdependent manner, and the oxidative folding is characterized by a high heterogeneity of one-, two-, and three-disulfide intermediates. The formation of the most abundant species, the main folding intermediate, is favored over other species even in the absence of non-covalent sequential preferences. Time-resolved NMR and photochemically induced dynamic nuclear polarization spectroscopies were used to follow the oxidative folding at the level of amino acid residue conformation. Because this is the first time that a complete oxidative folding process has been monitored with these two techniques, their results were compared with those obtained at the level of an individual disulfide species. The techniques proved to be valuable for the study of conformational developments and aromatic accessibility changes along oxidative folding pathways. A detailed picture of the oxidative folding of AAI provides a model study that combines different biochemical and biophysical techniques for a fuller understanding of a complex process.     

The high-resolution NMR structure of the early folding intermediate of the Thermus thermophilus ribonuclease H

Elucidation of the high-resolution structures of folding intermediates is a necessary but difficult step toward the ultimate understanding of the mechanism of protein folding. Here, using hydrogen-exchange-directed protein engineering, we populated the folding intermediate of the Thermus thermophilus ribonuclease H, which forms before the rate-limiting transition state, by removing the unfolded regions of the intermediate, including an α-helix and two β-strands (51 folded residues). Using multidimensional NMR, we solved the structure of this intermediate mimic to an atomic resolution (backbone rmsd, 0.51 Å). It has a native-like backbone topology and shows some local deviations from the native structure, revealing that the structure of the folded region of an early folding intermediate can be as well defined as the native structure. The topological parameters calculated from the structures of the intermediate mimic and the native state predict that the intermediate should fold on a millisecond time scale or less and form much faster than the native state. Other factors that may lead to the slow folding of the native state and the accumulation of the intermediate before the rate-limiting transition state are also discussed.     

Structure and heterogeneity of the one- and two-disulfide folding intermediates of tick anticoagulant peptide

Tick anticoagulant peptide (TAP) is a factor Xa-specific inhibitor and is structurally homologous to bovine pancreatic trypsin inhibitor (BPTI). The fully reduced TAP refolds spontaneously to form the native structure under a wide variation of redox buffers. The folding intermediates of TAP consist of at least 22 fractions of one-disulfide, two-disulfide, and three-disulfide scrambled isomers. Three species of well-populated one- and two-disulfide intermediates were isolated and structurally characterized. The predominant one-disulfide species contains TAP-(Cys33—Cys55). Two major two-disulfide isomers were TAP-(Cys33—Cys55, Cys15—Cys39) and TAP-(Cys33—Cys55, Cys5—Cys39). Both Cys33—Cys55 and Cys15—Cys39 are native disulfides of TAP. These three species are structural counterparts of BPTI-(Cys30—Cys51), BPTI-(Cys30—Cys51, Cys14—Cys38), and BPTI-(Cys30—Cys51,Cys5—Cys38), which have been shown to be the major intermediates of BPTI folding. In addition, time-course-trapped folding intermediates of TAP, consisting of about 47% one-disulfide species and 30% two-disulfide species, were collectively digested with thermolysin, and fragmented peptides were analyzed by Edman sequencing and mass spectrometry in order to characterize the disulfide-containing peptides. Among the 15 possible single-disulfide pairings of TAP, 10 (2 native and 8 nonnative) were found as structural components of its one- and two-disulfide folding intermediates. The results demonstrate that the major folding intermediates of TAP bear structural homology to those of BPTI. However, the folding pathway of TAP differs from that of BPTI by (a) a higher degree of heterogeneity of one- and two-disulfide intermediates and (b) the presence of three-disulfide scrambled isomers as folding intermediates. Mechanism(s) that may account for these diversities are proposed and discussed.     

Deciphering the Structural Basis That Guides the Oxidative Folding of Leech-derived Tryptase Inhibitor

Protein folding mechanisms have remained elusive mainly because of the transient nature of intermediates. Leech-derived tryptase inhibitor (LDTI) is a Kazal-type serine proteinase inhibitor that is emerging as an attractive model for folding studies. It comprises 46 amino acid residues with three disulfide bonds, with one located inside a small triple-stranded antiparallel β-sheet and with two involved in a cystine-stabilized α-helix, a motif that is widely distributed in bioactive peptides. Here, we analyzed the oxidative folding and reductive unfolding of LDTI by chromatographic and disulfide analyses of acid-trapped intermediates. It folds and unfolds, respectively, via sequential oxidation and reduction of the cysteine residues that give rise to a few 1- and 2-disulfide intermediates. Species containing two native disulfide bonds predominate during LDTI folding (IIa and IIc) and unfolding (IIa and IIb). Stop/go folding experiments demonstrate that only intermediate IIa is productive and oxidizes directly into the native form. The NMR structures of acid-trapped and further isolated IIa, IIb, and IIc reveal global folds similar to that of the native protein, including a native-like canonical inhibitory loop. Enzyme kinetics shows that both IIa and IIc are inhibitory-active, which may substantially reduce proteolysis of LDTI during its folding process. The results reported show that the kinetics of the folding reaction is modulated by the specific structural properties of the intermediates and together provide insights into the interdependence of conformational folding and the assembly of native disulfides during oxidative folding.     

Formation of a native-like subdomain in a partially folded intermediate of bovine pancreatic trypsin inhibitor.

In the folding of bovine pancreatic trypsin inhibitor (BPTI), the single-disulfide intermediate [30-51] plays a key role. We have investigated a recombinant analog of [30-51] using a 2-dimensional nuclear magnetic resonance (2D-NMR). This recombinant analog, named [30-51]Ala, contains a disulfide bond between Cys-30 and Cys-51, but contains alanine in place of the other cysteines in BPTI to prevent the formation of other intermediates. By 2D-NMR, [30-51]Ala consists of 2 regions-one folded and one predominantly unfolded. The folded region resembles a previously characterized peptide model of [30-51], named P alpha P beta, that contains a native-like subdomain with tertiary packing. The unfolded region includes the first 14 N-terminal residues of [30-51] and is as unfolded as an isolated peptide containing these residues. Using protein dissection, we demonstrate that the folded and unfolded regions of [30-51]Ala are structurally independent. The partially folded structure of [30-51]Ala explains many of the properties of authentic [30-51] in the folding pathway of BPTI. Moreover, direct structural characterization of [30-51]Ala has revealed that a crucial step in the folding pathway of BPTI coincides with the formation of a native-like subdomain, supporting models for protein folding that emphasize the formation of cooperatively folded subdomains.     

A new two-disulphide intermediate in the refolding of reduced bovine pancreatic trypsin inhibitor

The apparently complete refolding of reduced bovine pancreatic trypsin inhibitor (BPTI) is shown to produce a mixture of two species. One of these is native BPTI, but the other lacks the disulphide bond between cysteines 30 and 51. The latter species has a folded conformation very like that of native BPTI, and is oxidized by air to native BPTI on warming in aqueous solution. The two unreactive cysteine thiol groups appear to be buried in the interior of the molecule, which restricts access by reagents that can alkylate them or oxidize them to form the disulphide bond. The implications of this intermediate and its conformation for the understanding of protein folding are discussed.     

Size-exclusion high performance liquid chromatography of native trypsinogen, the denatured protein, and partially refolded molecules. Further evidence that non-native disulfide bonds are dominant in refolding the completely reduced protein

Size-exclusion high performance liquid chromatography was used to compare the Stokes radius of the mixed disulfide of trypsinogen refolded for 10 min with the Stokes radius of denatured trypsinogen in high concentrations of urea. After folding for 10 min, rechromatography of a collection of sequential fractions of an initial separation showed that the fractions display microheterogeneity as seen in the value of the Stokes radius of each fraction. These intermediate species differed in their Stokes radius, and each had a globular structure cross-linked by disulfide bonds. In contrast, when trypsinogen with the native disulfides intact was equilibrated at different concentrations of urea (0-8 M), a progressive increase in Stokes radius was observed with extent of unfolding. Rechromatography of a series of fractions collected at a specific urea concentration showed that each had the same Stokes radius as the fraction in the initial separation. Urea-denatured trypsinogen and partially refolded trypsinogen must therefore differ in the disulfide pairing that links regions of the polypeptide chain. These observations support the suggestion that non-native disulfide bonds are responsible for the many stable conformations that form early in the folding of the mixed disulfide of trypsinogen (Light, A., and Higaki, J.N. (1987) Biochemistry 26, 5556-5564). These intermediates initially are loose structures (large Stokes radius) that become more compact with time (decreasing Stokes radius). The intermediates must therefore undergo a continuing disulfide interchange until native disulfides form late in the process when the stable conformation of the native molecule is reached.     

Solvent accessibility, protein surfaces, and protein folding.

Studies of the native structures of proteins, together with measurements of the thermodynamic properties of the transition between unfolded and native states, have defined the major components of the forces that stabilize native protein structures. However, the nature of the intermediates in the folding process remains largely hypothetical. It is a fairly widespread and not implausible assumption that the intermediates in the folding of a monomeric protein contain the same kinds of secondary and tertiary structures that appear in the native conformation, and that, although unstable, their lifetimes are prolonged by forces similar to those that stabilize the native structure. We wished to examine what happens if, during the folding of a monomeric protein, regions of secondary structure come together to form an intermediate of reduced instability. We applied calculations of accessible surface area (a measure of hydrophobic stabilization) and parameterized nonbonded energy calculations (measuring the strengths of van der Waals forces) to identify the kinds of stabilizing interactions that might be available to such an intermediate. First, we analyzed the total buried surface area of two types of proteins into contributions from formation of secondary structure alone, interaction of pairs of secondary-structural elements, the formation of the structure alone, interaction of pairs of secondary-structural elements, the formation of the complete secondary structure without the turns, and the complete native structure. The formation of secondary structure alone, without tertiary-structural interactions, buries roughly half the surface that the complete structure does. We then analyzed in more detail the approach of two alpha-helices to form a complex, as an illustrative example of the nature of the interaction between compact structural units which remain fairly rigid during their interaction. Many features of the results are not limited to the interaction of alpha-helices. (The results therefore neither confirm nor refute the hypothesis that alpha-helices are intermediates in the folding proteins). We find that the first forces to be felt upon approach arise from solvent conditions on the relative position and orientation of the two helices as does the close packing which optimizes the van der Waals interactions at shorter distances apart. Therefore there appears to be a range of distances in which hydrophobic interactions could create a nonspecific complex between two helices in which the side chains might have sufficient time to seek the proper interdigitation observed in the native structure, where the two helices are in intimate contact. Indeed, we find that only in the final stages of approach is the native geometry the most stable; in the region in which solvent-exclusion forces predominate, the conformation with helix axes parallel is more stable than the native conformation, in the cases we examined...