Expression in Bacillus subtilis of the Bacillus thuringiensis cryIIIA toxin gene is not dependent on a sporulation-specific sigma factor and is increased in a spo0A mutant.

Expression of the Bacillus thuringiensis cryIIIA gene encoding a Coleoptera-specific toxin is weak during vegetative growth and is activated at the onset of the stationary phase. cryIIIA'-'lacZ fusions and primer extension analysis show that the regulation of cryIIIA expression is similar in Bacillus subtilis and in B. thuringiensis. Activation of cryIIIA expression was not altered in B. subtilis mutant strains deficient for the sigma H and sigma E sporulation-specific sigma factors or for minor sigma factors such as sigma B, sigma D, or sigma L. This result and the nucleotide sequence of the -35 and -10 regions of the cryIIIA promoter suggest that cryIIIA expression might be directed by the E sigma A form of RNA polymerase. Expression of the cryIIIA'-'lacZ fusion is shut off after t2 (2 h after time zero) of sporulation in the B. subtilis wild-type strain grown on nutrient broth sporulation medium. However, no decrease in cryIIIA-directed beta-galactosidase activity occurred in sigma H, kinA, or spo0A mutant strains. Moreover, beta-galactosidase activity was higher and remained elevated after t2 in the spo0A mutant strain. beta-Galactosidase activity was weak in abrB and spo0A abrB mutant strains, suggesting that AbrB is responsible for the higher level of cryIIIA expression observed in a spo0A mutant. However, both in spo0A and spo0A abrB mutant strains, beta-galactosidase activity remained elevated after t2, suggesting that even in the absence of AbrB, cryIIIA expression is controlled through modulation of the phosphorylated form of Spo0A. When the cryIIIA gene is expressed in a B. subtilis spo0A mutant strain or in the 168 wild-type strain, large amounts of toxins are produced and accumulate to form a flat rectangular crystal characteristic of the coleopteran-specific B. thuringiensis strains.     

AbrB is a regulator of the sigma(W) regulon in Bacillus subtilis

The Bacillus subtilis global regulator AbrB was found to negatively control expression of sigW and genes of the sigma(W) regulon. AbrB bound to DNA regions in the autoregulatory sigW promoter and to some, but not all, of the other sigma(W)-dependent promoters in B. subtilis. Defects in antibiotic resistance properties caused by spo0A mutations are at least partially correlated with AbrB repression of the sigma(W) regulon.     

Identification of Bacillus subtilis SipW as a bifunctional signal peptidase that controls surface-adhered biofilm formation

Biofilms of microbial cells encased in an exopolymeric matrix can form on solid surfaces, but how bacteria sense a solid surface and upregulate biofilm genes is largely unknown. We investigated the role of the Bacillus subtilis signal peptidase, SipW, which has a unique role in forming biofilms on a solid surface and is not required at an air-liquid interface. Surprisingly, we found that the signal peptidase activity of SipW was not required for solid-surface biofilms. Furthermore, a SipW mutant protein was constructed that lacks the ability to form a solid-surface biofilm but still retains signal peptidase activity. Through genetic and gene expression tests, the non-signal peptidase role of SipW was found to activate biofilm matrix genes specifically when cells were on a solid surface. These data provide the first evidence that a signal peptidase is bifunctional and that SipW has a regulatory role in addition to its role as a signal peptidase.     

Effects of phosphorelay perturbations on architecture, sporulation, and spore resistance in biofilms of Bacillus subtilis

The spore-forming bacterium Bacillus subtilis is able to form highly organized multicellular communities called biofilms. This coordinated bacterial behavior is often lost in domesticated or laboratory strains as a result of planktonic growth in rich media for many generations. However, we show here that the laboratory strain B. subtilis 168 is still capable of forming spatially organized multicellular communities on minimal medium agar plates, exemplified by colonies with vein-like structures formed by elevated bundles of cells. In line with the current model for biofilm formation, we demonstrate that overproduction of the phosphorelay components KinA and Spo0A stimulates bundle formation, while overproduction of the transition state regulators AbrB and SinR leads to repression of formation of elevated bundles. Time-lapse fluorescence microscopy studies of B. subtilis green fluorescent protein reporter strains show that bundles are preferential sites for spore formation and that flat structures surrounding the bundles contain vegetative cells. The elevated bundle structures are formed prior to sporulation, in agreement with a genetic developmental program in which these processes are sequentially activated. Perturbations of the phosphorelay by disruption and overexpression of genes that lead to an increased tendency to sporulate result in the segregation of sporulation mutations and decreased heat resistance of spores in biofilms. These results stress the importance of a balanced control of the phosphorelay for biofilm and spore development.     

Biofilm formation by the fungal pathogen Candida albicans: development, architecture, and drug resistance

Biofilms are a protected niche for microorganisms, where they are safe from antibiotic treatment and can create a source of persistent infection. Using two clinically relevant Candida albicans biofilm models formed on bioprosthetic materials, we demonstrated that biofilm formation proceeds through three distinct developmental phases. These growth phases transform adherent blastospores to well-defined cellular communities encased in a polysaccharide matrix. Fluorescence and confocal scanning laser microscopy revealed that C. albicans biofilms have a highly heterogeneous architecture composed of cellular and noncellular elements. In both models, antifungal resistance of biofilm-grown cells increased in conjunction with biofilm formation. The expression of agglutinin-like (ALS) genes, which encode a family of proteins implicated in adhesion to host surfaces, was differentially regulated between planktonic and biofilm-grown cells. The ability of C. albicans to form biofilms contrasts sharply with that of Saccharomyces cerevisiae, which adhered to bioprosthetic surfaces but failed to form a mature biofilm. The studies described here form the basis for investigations into the molecular mechanisms of Candida biofilm biology and antifungal resistance and provide the means to design novel therapies for biofilm-based infections.     

The effect of Spo0A and AbrB proteins on expression of the genes of guanyl-specific ribonucleases from Bacillus intermedius and Bacillus pumilus in Bacillus subtilis recombinant strains

Guanyl-specific ribonucleases from Bacillus intermedius and Bacillus pumilus are actively secreted under phosphate starvation by recombinant strains of Bacillus subtilis with native regulatory systems and by strains defective in some proteins of the Spo0A phosphorylation pathway. The level of expression of ribonuclease genes has been shown to increase approximately sixfold in recombinant strains with mutation in the spo0A gene and threefold in the spo0A/abrB mutants, as compared with native strains. These results demonstrate that the Spo0A protein regulates the production of ribonucleases and thus acts as a repressor, while the AbrB protein is an activator of expression of the genes encoding ribonucleases from Bacillus intermedius and Bacillus pumilus in Bacillus subtilis cells.     

Single-cell Analysis of Bacillus subtilis Biofilms Using Fluorescence Microscopy and Flow Cytometry

Biofilm formation is a general attribute to almost all bacteria ^1-6. When bacteria form biofilms, cells are encased in extracellular matrix that is mostly constituted by proteins and exopolysaccharides, among other factors ^7-10. The microbial community encased within the biofilm often shows the differentiation of distinct subpopulation of specialized cells ^11-17. These subpopulations coexist and often show spatial and temporal organization within the biofilm ^18-21.Biofilm formation in the model organism Bacillus subtilis requires the differentiation of distinct subpopulations of specialized cells. Among them, the subpopulation of matrix producers, responsible to produce and secrete the extracellular matrix of the biofilm is essential for biofilm formation ^11,19. Hence, differentiation of matrix producers is a hallmark of biofilm formation in B. subtilis.We have used fluorescent reporters to visualize and quantify the subpopulation of matrix producers in biofilms of B. subtilis^15,19,22-24. Concretely, we have observed that the subpopulation of matrix producers differentiates in response to the presence of self-produced extracellular signal surfactin ²⁵. Interestingly, surfactin is produced by a subpopulation of specialized cells different from the subpopulation of matrix producers ¹⁵.We have detailed in this report the technical approach necessary to visualize and quantify the subpopulation of matrix producers and surfactin producers within the biofilms of B.subtilis. To do this, fluorescent reporters of genes required for matrix production and surfactin production are inserted into the chromosome of B. subtilis. Reporters are expressed only in a subpopulation of specialized cells. Then, the subpopulations can be monitored using fluorescence microscopy and flow cytometry (See Fig 1).The fact that different subpopulations of specialized cells coexist within multicellular communities of bacteria gives us a different perspective about the regulation of gene expression in prokaryotes. This protocol addresses this phenomenon experimentally and it can be easily adapted to any other working model, to elucidate the molecular mechanisms underlying phenotypic heterogeneity within a microbial community.     

The protective layer of biofilm: a repellent function for a new class of amphiphilic proteins

Bacteria can survive harsh conditions when growing in complex communities of cells known as biofilms. The matrix of the biofilm presents a scaffold where cells are attached to each other and to the surface. The biofilm matrix is also a protective barrier that confers tolerance against various antimicrobial agents. In this issue of Molecular Microbiology, Kobayashi and Iwano (2012) show that the liquid permeability of Bacillus subtilis biofilms is determined by a small secreted protein, i.e. BslA (formerly called YuaB). BslA is important for the proper development of biofilms, but unlike exopolysaccharide and TasA, is not directly involved in cell cluster formation, and is synthesized following the production of exopolysaccharide and amyloid fibres. The amphiphilic BslA protein forms a polymer in vitro and localizes in vivo to the surface of the biofilm. The microstructures of the biofilm wrinkles are reduced in the bslA mutant strain and the liquid repellency of the biofilm surface is diminished. Exogenously added BslA(42-181) protein complements the bslA mutation and restores not only water repellency, but also the formation of aerial structures. This study demonstrates that amphiphilic proteins have an important role in liquid repellency of biofilms and it suggests that these polymers contribute to antimicrobial resistance.     

Delineation of AbrB-binding sites on the Bacillus subtilis spo0H, kinB, ftsAZ, and pbpE promoters and use of a derived homology to identify a previously unsuspected binding site in the bsuB1 methylase promote.

DNase I footprinting experiments showed that AbrB binds to the regulatory regions of the spo0H, kinB, ftsAZ, and pbpE genes. A conserved motif was found in these and other AbrB-binding sites. A search for Bacillus subtilis DNA sequences containing this motif led to the prediction that AbrB would bind to the promoter controlling the bsuB1 methylase gene. DNase I footprinting experiments confirmed this prediction.     

Defining the genetic differences between wild and domestic strains of Bacillus subtilis that affect poly-gamma-dl-glutamic acid production and biofilm formation

Biofilms are communities of microbial cells that are encased in a self-produced, polymeric matrix and are adherent to a surface. For several species of bacteria, an enhanced ability to form biofilms has been linked with an increased capability to produce exopolymers. To identify exopolymers of Bacillus subtilis that can contribute to biofilm formation, we transferred the genetic determinants that control exopolymer production from a wild, exopolymer-positive strain to a domesticated, exopolymer-negative strain. Mapping these genetic determinants led to the identification of gamma-poly-dl-glutamic acid (gamma-PGA) as an exopolymer that increases biofilm formation, possibly through enhancing cell-surface interactions. Production of gamma-PGA by Bacillus subtilis was known to be dependent on the two-component regulator ComPA; this study highlighted the additional dependence on the DegS-DegU, DegQ and SwrA regulator proteins. The inability of the domestic strain of B. subtilis to produce gamma-PGA was mapped to two base pairs; a single base pair change in the promoter region of degQ and a single base pair insertion in the coding region of swrA. Introduction of alleles of degQ and swrA from the wild strain into the domestic strain was sufficient to allow gamma-PGA production. In addition to controlling gamma-PGA production, ComPA and DegSU were also shown to activate biofilm formation through an as yet undefined pathway. The identification of these regulators as affecting gamma-PGA production and biofilm formation suggests that these processes are regulated by osmolarity, high cell density and phase variation.     

Assessment of biofilm formation by Scedosporium apiospermum,S. aurantiacum,S. minutisporum and Lomentospora prolificans

Reported herein is the ability of Scedosporium apiospermum, S. aurantiacum, S. minutisporum and Lomentospora prolificans conidia to adhere, differentiate into hyphae and form biofilms on both polystyrene and lung epithelial cells. To different degrees, all of the fungi adhered to polystyrene after 4 h, with a predominance of those with germinated conidia. Prolonged fungi–polystyrene contact resulted in the formation of a monolayer of intertwined mycelia, which was identified as a typical biofilm structure due to the presence of a viable mycelial biomass, extracellular matrix and enhanced antifungal resistance. Ultrastructural details were revealed by SEM and CLSM, showing the dense compaction of the mycelial biomass and the presence of channels within the organized biofilm. A similar biofilm structure was observed following the co-culture of each fungus with A549 cells, revealing a mycelial trap covering all of the lung epithelial monolayer. Collectively, these results highlight the potential for biofilm formation by these clinically relevant fungal pathogens.