Sorting specimen‐rich invertebrate samples with cost‐effective NGS barcodes: Validating a reverse workflow for specimen processing

Biologists frequently sort specimen‐rich samples to species. This process is daunting when based on morphology, and disadvantageous if performed using molecular methods that destroy vouchers (e.g., metabarcoding). An alternative is barcoding every specimen in a bulk sample and then presorting the specimens using DNA barcodes, thus mitigating downstream morphological work on presorted units. Such a “reverse workflow” is too expensive using Sanger sequencing, but we here demonstrate that is feasible with an next‐generation sequencing (NGS) barcoding pipeline that allows for cost‐effective high‐throughput generation of short specimen‐specific barcodes (313 bp of COI; laboratory cost <$0.50 per specimen) through next‐generation sequencing of tagged amplicons. We applied our approach to a large sample of tropical ants, obtaining barcodes for 3,290 of 4,032 specimens (82%). NGS barcodes and their corresponding specimens were then sorted into molecular operational taxonomic units (mOTUs) based on objective clustering and Automated Barcode Gap Discovery (ABGD). High diversity of 88–90 mOTUs (4% clustering) was found and morphologically validated based on preserved vouchers. The mOTUs were overwhelmingly in agreement with morphospecies (match ratio 0.95 at 4% clustering). Because of lack of coverage in existing barcode databases, only 18 could be accurately identified to named species, but our study yielded new barcodes for 48 species, including 28 that are potentially new to science. With its low cost and technical simplicity, the NGS barcoding pipeline can be implemented by a large range of laboratories. It accelerates invertebrate species discovery, facilitates downstream taxonomic work, helps with building comprehensive barcode databases and yields precise abundance information.     

Environmental barcoding: a next-generation sequencing approach for biomonitoring applications using river benthos

Timely and accurate biodiversity analysis poses an ongoing challenge for the success of biomonitoring programs. Morphology-based identification of bioindicator taxa is time consuming, and rarely supports species-level resolution especially for immature life stages. Much work has been done in the past decade to develop alternative approaches for biodiversity analysis using DNA sequence-based approaches such as molecular phylogenetics and DNA barcoding. On-going assembly of DNA barcode reference libraries will provide the basis for a DNA-based identification system. The use of recently introduced next-generation sequencing (NGS) approaches in biodiversity science has the potential to further extend the application of DNA information for routine biomonitoring applications to an unprecedented scale. Here we demonstrate the feasibility of using 454 massively parallel pyrosequencing for species-level analysis of freshwater benthic macroinvertebrate taxa commonly used for biomonitoring. We designed our experiments in order to directly compare morphology-based, Sanger sequencing DNA barcoding, and next-generation environmental barcoding approaches. Our results show the ability of 454 pyrosequencing of mini-barcodes to accurately identify all species with more than 1% abundance in the pooled mixture. Although the approach failed to identify 6 rare species in the mixture, the presence of sequences from 9 species that were not represented by individuals in the mixture provides evidence that DNA based analysis may yet provide a valuable approach in finding rare species in bulk environmental samples. We further demonstrate the application of the environmental barcoding approach by comparing benthic macroinvertebrates from an urban region to those obtained from a conservation area. Although considerable effort will be required to robustly optimize NGS tools to identify species from bulk environmental samples, our results indicate the potential of an environmental barcoding approach for biomonitoring programs.     

Next‐generation DNA barcoding: using next‐generation sequencing to enhance and accelerate DNA barcode capture from single specimens

DNA barcoding is an efficient method to identify specimens and to detect undescribed/cryptic species. Sanger sequencing of individual specimens is the standard approach in generating large‐scale DNA barcode libraries and identifying unknowns. However, the Sanger sequencing technology is, in some respects, inferior to next‐generation sequencers, which are capable of producing millions of sequence reads simultaneously. Additionally, direct Sanger sequencing of DNA barcode amplicons, as practiced in most DNA barcoding procedures, is hampered by the need for relatively high‐target amplicon yield, coamplification of nuclear mitochondrial pseudogenes, confusion with sequences from intracellular endosymbiotic bacteria (e.g. Wolbachia) and instances of intraindividual variability (i.e. heteroplasmy). Any of these situations can lead to failed Sanger sequencing attempts or ambiguity of the generated DNA barcodes. Here, we demonstrate the potential application of next‐generation sequencing platforms for parallel acquisition of DNA barcode sequences from hundreds of specimens simultaneously. To facilitate retrieval of sequences obtained from individual specimens, we tag individual specimens during PCR amplification using unique 10‐mer oligonucleotides attached to DNA barcoding PCR primers. We employ 454 pyrosequencing to recover full‐length DNA barcodes of 190 specimens using 12.5% capacity of a 454 sequencing run (i.e. two lanes of a 16 lane run). We obtained an average of 143 sequence reads for each individual specimen. The sequences produced are full‐length DNA barcodes for all but one of the included specimens. In a subset of samples, we also detected Wolbachia, nontarget species, and heteroplasmic sequences. Next‐generation sequencing is of great value because of its protocol simplicity, greatly reduced cost per barcode read, faster throughout and added information content.     

Plant DNA barcoding: from gene to genome

DNA barcoding is currently a widely used and effective tool that enables rapid and accurate identification of plant species; however, none of the available loci work across all species. Because single‐locus DNA barcodes lack adequate variations in closely related taxa, recent barcoding studies have placed high emphasis on the use of whole‐chloroplast genome sequences which are now more readily available as a consequence of improving sequencing technologies. While chloroplast genome sequencing can already deliver a reliable barcode for accurate plant identification it is not yet resource‐effective and does not yet offer the speed of analysis provided by single‐locus barcodes to unspecialized laboratory facilities. Here, we review the development of candidate barcodes and discuss the feasibility of using the chloroplast genome as a super‐barcode. We advocate a new approach for DNA barcoding that, for selected groups of taxa, combines the best use of single‐locus barcodes and super‐barcodes for efficient plant identification. Specific barcodes might enhance our ability to distinguish closely related plants at the species and population levels.     

A DNA mini‐barcode for marine macrophytes

Studies focusing on marine macrophyte metabarcoding from environmental samples are scarce, due to the lack of a universal barcode for these taxa, and to their poor representation in DNA databases. Here, we searched for a short barcode able to identify marine macrophytes from tissue samples; then, we created a DNA reference library which was used to identify macrophytes in eDNA from coastal sediments. Barcoding of seagrasses, mangroves and marine macroalgae (Chlorophyta, Rhodophyta and Phaeophyceae) was tested using 18 primer pairs from six barcoding genes: the plant barcodes rbcL, matK and trnL, plus the genes ITS2, COI and 18S. The 18S gene showed the highest universality among marine macrophytes, amplifying 95%–100% of samples; amplification performance of the other barcodes was limited. Taxonomy was assigned using a phylogeny‐based approach to create an 18S DNA reference library. Macrophyte tissue sequences were accurately identified within their phyla (88%), order (76%), genus (71%) and species (23%). Nevertheless, out of 86 macrophytes tested, only 48% and 15% had a reference sequence at genus and at species level, respectively. Identification at these levels can be improved by more inclusive reference libraries. Using the 18S mini‐barcode and the reference library, we recovered eDNA from 21 marine macrophytes in sediments, demonstrating the barcode's ability to trace primary producers that contribute to blue carbon. We expect this barcode to also be useful for other ecological questions, such as tracing macro primary producers in marine food webs.     

Building a DNA Barcode Reference Library for the True Butterflies (Lepidoptera) of Peninsula Malaysia: What about the Subspecies?

The objective of this study was to build a DNA barcode reference library for the true butterflies of Peninsula Malaysia and assess the value of attaching subspecies names to DNA barcode records. A new DNA barcode library was constructed with butterflies from the Museum of Zoology, University of Malaya collection. The library was analysed in conjunction with publicly available DNA barcodes from other Asia-Pacific localities to test the ability of the DNA barcodes to discriminate species and subspecies. Analyses confirmed the capacity of the new DNA barcode reference library to distinguish the vast majority of species (92%) and revealed that most subspecies possessed unique DNA barcodes (84%). In some cases conspecific subspecies exhibited genetic distances between their DNA barcodes that are typically seen between species, and these were often taxa that have previously been regarded as full species. Subspecies designations as shorthand for geographically and morphologically differentiated groups provide a useful heuristic for assessing how such groups correlate with clustering patterns of DNA barcodes, especially as the number of DNA barcodes per species in reference libraries increases. Our study demonstrates the value in attaching subspecies names to DNA barcode records as they can reveal a history of taxonomic concepts and expose important units of biodiversity.     

A ranking system for reference libraries of DNA barcodes: application to marine fish species from Portugal

Background

The increasing availability of reference libraries of DNA barcodes (RLDB) offers the opportunity to the screen the level of consistency in DNA barcode data among libraries, in order to detect possible disagreements generated from taxonomic uncertainty or operational shortcomings. We propose a ranking system to attribute a confidence level to species identifications associated with DNA barcode records from a RLDB. Here we apply the proposed ranking system to a newly generated RLDB for marine fish of Portugal.

Methodology/Principal Findings

Specimens (n = 659) representing 102 marine fish species were collected along the continental shelf of Portugal, morphologically identified and archived in a museum collection. Samples were sequenced at the barcode region of the cytochrome oxidase subunit I gene (COI-5P). Resultant DNA barcodes had average intra-specific and inter-specific Kimura-2-parameter distances (0.32% and 8.84%, respectively) within the range usually observed for marine fishes. All specimens were ranked in five different levels (A–E), according to the reliability of the match between their species identification and the respective diagnostic DNA barcodes. Grades A to E were attributed upon submission of individual specimen sequences to BOLD-IDS and inspection of the clustering pattern in the NJ tree generated. Overall, our study resulted in 73.5% of unambiguous species IDs (grade A), 7.8% taxonomically congruent barcode clusters within our dataset, but awaiting external confirmation (grade B), and 18.7% of species identifications with lower levels of reliability (grades C/E).

Conclusion/Significance

We highlight the importance of implementing a system to rank barcode records in RLDB, in order to flag taxa in need of taxonomic revision, or reduce ambiguities of discordant data. With increasing DNA barcode records publicly available, this cross-validation system would provide a metric of relative accuracy of barcodes, while enabling the continuous revision and annotation required in taxonomic work.     

Challenges to barcoding an entire flora

DNA barcodes are species‐specific genetic markers that allow taxonomic identification of biological samples. The promise of DNA barcoding as a rapid molecular tool for conducting biodiversity inventories has catalysed renewed efforts to document and catalogue the diversity of life, parallel to the large‐scale sampling conducted by Victorian naturalists. The unique contribution of DNA barcode data is in its ability to identify biotic material that would be impossible to classify using traditional taxonomic keys. However, the utility of DNA barcoding relies upon the construction of accurate barcode libraries that provide a reference database to match to unidentified samples. Whilst there has been much debate in the literature over the choice and efficacy of barcode markers, there has been little consideration of the practicalities of generating comprehensive barcode reference libraries for species‐rich floras. Here, we discuss several challenges to the generation of such libraries and present a case study from a regional biodiversity hotspot in southern Quebec. We suggest that the key challenges include (i) collection of specimens for rare or ephemeral species, (ii) limited access to taxonomic expertise necessary for reliable identification of reference specimens and (iii) molecular challenges in amplifying and matching barcode data. To be most effective, we recommend that sampling must be both flexible and opportunistic and conducted across the entire growing season by expert taxonomists. We emphasize that the success of the global barcoding initiative will depend upon the close collaboration of taxonomists, plant collectors, and molecular biologists.     

Promise and Challenge of DNA Barcoding in Venus Slipper (Paphiopedilum)

Orchidaceae are one of the largest families of flowering plants, with over 27,000 species described and all orchids are listed in CITES. Moreover, the seedlings of orchid species from the same genus are similar. The objective of DNA barcoding is rapid, accurate, and automated species identification, which may be used to identify illegally traded endangered species from vegetative specimens of Paphiopedilum (Venus slipper), a flagship group for plant conservation with high ornamental and commercial values. Here, we selected eight chloroplast barcodes and nrITS to evaluate their suitability in Venus slippers. The results indicate that all tested barcodes had no barcoding gap and the core plant barcodes showed low resolution for the identification of Venus slippers (18.86%). Of the single-locus barcodes, nrITS is the most efficient for the species identification of the genus (52.27%), whereas matK + atpF-atpH is the most efficient multi-locus combination (28.97%). Therefore, we recommend the combination of matK + atpF-atpH + ITS as a barcode for Venus slippers. Furthermore, there is an upper limit of resolution of the candidate barcodes, and only half of the taxa with multiple samples were identified successfully. The low efficiency of these candidate barcodes in Venus slippers may be caused by relatively recent speciation, the upper limit of the barcodes, and/or the sampling density. Although the discriminatory power is relatively low, DNA barcoding may be a promising tool to identify species involved in illegal trade, which has broad applications and is valuable for orchid conservation.     

Assessment of candidate plant DNA barcodes using the Rutaceae family

DNA barcoding is a rapidly developing frontier technology that is gaining worldwide attention.Here,seven regions (psbA-trnH,matK,ycf5,rpoC1,rbcL,ITS2,and ITS) with potential for use as DNA barcodes were tested for their ability to identify 300 samples of 192 species from 72 genera of the family Rutaceae.To evaluate each barcode’s utility for species authentication,PCR amplification efficiency,genetic divergence,and barcoding gaps were assessed.We found that the ITS2 region exhibited the highest inter-specific divergence,and that this was significantly higher than the intra-specific variation in the "DNA barcoding gap" assessment and Wilcoxon two-sample tests.The ITS2 locus had the highest identification efficiency among all tested regions.In a previous study,we found that ITS2 was able to discriminate a wide range of plant taxa,and here we confirmed that ITS2 was also able to discriminate a number of closely related species.Therefore,we propose that ITS2 is a promising candidate barcode for plant species identification.     

Barcoding and border biosecurity: identifying cyprinid fishes in the aquarium trade

Background

Poorly regulated international trade in ornamental fishes poses risks to both biodiversity and economic activity via invasive alien species and exotic pathogens. Border security officials need robust tools to confirm identifications, often requiring hard-to-obtain taxonomic literature and expertise. DNA barcoding offers a potentially attractive tool for quarantine inspection, but has yet to be scrutinised for aquarium fishes. Here, we present a barcoding approach for ornamental cyprinid fishes by: (1) expanding current barcode reference libraries; (2) assessing barcode congruence with morphological identifications under numerous scenarios (e.g. inclusion of GenBank data, presence of singleton species, choice of analytical method); and (3) providing supplementary information to identify difficult species.

Methodology/Principal Findings

We sampled 172 ornamental cyprinid fish species from the international trade, and provide data for 91 species currently unrepresented in reference libraries (GenBank/Bold). DNA barcodes were found to be highly congruent with our morphological assignments, achieving success rates of 90–99%, depending on the method used (neighbour-joining monophyly, bootstrap, nearest neighbour, GMYC, percent threshold). Inclusion of data from GenBank (additional 157 spp.) resulted in a more comprehensive library, but at a cost to success rate due to the increased number of singleton species. In addition to DNA barcodes, our study also provides supporting data in the form of specimen images, morphological characters, taxonomic bibliography, preserved vouchers, and nuclear rhodopsin sequences. Using this nuclear rhodopsin data we also uncovered evidence of interspecific hybridisation, and highlighted unrecognised diversity within popular aquarium species, including the endangered Indian barb Puntius denisonii.

Conclusions/Significance

We demonstrate that DNA barcoding provides a highly effective biosecurity tool for rapidly identifying ornamental fishes. In cases where DNA barcodes are unable to offer an identification, we improve on previous studies by consolidating supplementary information from multiple data sources, and empower biosecurity agencies to confidently identify high-risk fishes in the aquarium trade.     

Delineating closely related species with DNA barcodes for routine biological monitoring

相似文献   

Quantitative bias in Illumina TruSeq and a novel post amplification barcoding strategy for multiplexed DNA and small RNA deep sequencing

Here we demonstrate a method for unbiased multiplexed deep sequencing of RNA and DNA libraries using a novel, efficient and adaptable barcoding strategy called Post Amplification Ligation-Mediated (PALM). PALM barcoding is performed as the very last step of library preparation, eliminating a potential barcode-induced bias and allowing the flexibility to synthesize as many barcodes as needed. We sequenced PALM barcoded micro RNA (miRNA) and DNA reference samples and evaluated the quantitative barcode-induced bias in comparison to the same reference samples prepared using the Illumina TruSeq barcoding strategy. The Illumina TruSeq small RNA strategy introduces the barcode during the PCR step using differentially barcoded primers, while the TruSeq DNA strategy introduces the barcode before the PCR step by ligation of differentially barcoded adaptors. Results show virtually no bias between the differentially barcoded miRNA and DNA samples, both for the PALM and the TruSeq sample preparation methods. We also multiplexed miRNA reference samples using a pre-PCR barcode ligation. This barcoding strategy results in significant bias.     

Species-Specific Identification from Incomplete Sampling: Applying DNA Barcodes to Monitoring Invasive Solanum Plants

Comprehensive sampling is crucial to DNA barcoding, but it is rarely performed because materials are usually unavailable. In practice, only a few rather than all species of a genus are required to be identified. Thus identification of a given species using a limited sample is of great importance in current application of DNA barcodes. Here, we selected 70 individuals representing 48 species from each major lineage of Solanum, one of the most species-rich genera of seed plants, to explore whether DNA barcodes can provide reliable specific-species discrimination in the context of incomplete sampling. Chloroplast genes ndhF and trnS-trnG and the nuclear gene waxy, the commonly used markers in Solanum phylogeny, were selected as the supplementary barcodes. The tree-building and modified barcode gap methods were employed to assess species resolution. The results showed that four Solanum species of quarantine concern could be successfully identified through the two-step barcoding sampling strategy. In addition, discrepancies between nuclear and cpDNA barcodes in some samples demonstrated the ability to discriminate hybrid species, and highlights the necessity of using barcode regions with different modes of inheritance. We conclude that efficient phylogenetic markers are good candidates as the supplementary barcodes in a given taxonomic group. Critically, we hypothesized that a specific-species could be identified from a phylogenetic framework using incomplete sampling–through this, DNA barcoding will greatly benefit the current fields of its application.     

DNA barcoding Chinese medicinal Bupleurum

We tested 4 markers, namely nuclear internal transcribed spacer 2 (ITS2), psbA-trnH, matK, and rbcL, to evaluate these candidate DNA barcodes for distinguishing Bupleuri radix (Chaihu) from its adulterants. 51 plant samples of Bupleurum representing 19 species were collected from different areas in China. Amplification and sequencing were attempted for all the 4 candidate barcode regions, whose validity was assessed in terms of the success rate of PCR amplification and sequencing, differential intra- and inter-specific divergences, DNA barcoding gap and the ability to discriminate species. The results showed that ITS2 had the best performance in identifying Bupleurum with an identification efficiency of 73.68%, which, after combining with psbA-trnH, increased to 83.33%. We further evaluated the efficiency of ITS2 for discriminating the species of Bupleurum using a large database from GenBank, which archived data of 223 samples from 74 species, and ITS2 successfully discriminated 64.13% of the samples at the species level. In conclusion, the ITS2 can serve as a potentially useful barcode for Bupleurum species, with psbA-trnH as a supplementary locus.     

DNA barcoding: a tool for improved taxon identification and detection of species diversity

Recently it was decided that portions of rbcL and matK gene regions are approved and required standard barcode regions for land plants. Ideally, DNA barcoding can provide a fast and reliable way to identify species. Compiling a library of barcodes can be enhanced by the numerous specimens available in botanic gardens, museums and herbaria and in other ex situ conservation collections. Barcoding can strengthen ongoing efforts of botanic gardens and ex situ conservation collections to preserve Earth’s biodiversity. Our study aimed to detect the usability of the universal primers of the standard DNA barcode, to produce standard barcodes for species identification and to detect the discriminatory power of the standard barcode in a set of different groups of plant and fungal taxa. We studied Betula species originating from different parts of the world, and Salix taxa, bryophytes and edible and poisonous fungal species originating from Finland. In Betula and Salix, the standard DNA barcode regions, portions of matK and rbcL, were able to identify species to genus level, but did not show adequate resolution for species discrimination. Thus, supplementary barcode regions are needed for species identification. In Salix, the trnH-psbA spacer was also used, and it proved to have more resolution but, yet, not adequate levels of interspecific divergence for all studied taxa. In a set of bryophyte species, the rbcL gene region was found to possess adequate resolution for species discrimination for most genera studied. In bryophytes, matK failed to amplify properly. In fungi, the combination of ITS1 and ITS2 proved to be effective for species discrimination, although alignment difficulties were encountered. In general, closely related or recently diverged species are the greatest challenge, and the problem is most difficult in plants, both in terms of a suitable combination of barcoding regions and the universality of used primers.     

Critical factors for assembling a high volume of DNA barcodes

Large-scale DNA barcoding projects are now moving toward activation while the creation of a comprehensive barcode library for eukaryotes will ultimately require the acquisition of some 100 million barcodes. To satisfy this need, analytical facilities must adopt protocols that can support the rapid, cost-effective assembly of barcodes. In this paper we discuss the prospects for establishing high volume DNA barcoding facilities by evaluating key steps in the analytical chain from specimens to barcodes. Alliances with members of the taxonomic community represent the most effective strategy for provisioning the analytical chain with specimens. The optimal protocols for DNA extraction and subsequent PCR amplification of the barcode region depend strongly on their condition, but production targets of 100K barcode records per year are now feasible for facilities working with compliant specimens. The analysis of museum collections is currently challenging, but PCR cocktails that combine polymerases with repair enzyme(s) promise future success. Barcode analysis is already a cost-effective option for species identification in some situations and this will increasingly be the case as reference libraries are assembled and analytical protocols are simplified.     

Single nucleotide polymorphism barcoding of cytochrome c oxidase I sequences for discriminating 17 species of Columbidae by decision tree algorithm

DNA barcodes are widely used in taxonomy, systematics, species identification, food safety, and forensic science. Most of the conventional DNA barcode sequences contain the whole information of a given barcoding gene. Most of the sequence information does not vary and is uninformative for a given group of taxa within a monophylum. We suggest here a method that reduces the amount of noninformative nucleotides in a given barcoding sequence of a major taxon, like the prokaryotes, or eukaryotic animals, plants, or fungi. The actual differences in genetic sequences, called single nucleotide polymorphism (SNP) genotyping, provide a tool for developing a rapid, reliable, and high‐throughput assay for the discrimination between known species. Here, we investigated SNPs as robust markers of genetic variation for identifying different pigeon species based on available cytochrome c oxidase I (COI) data. We propose here a decision tree‐based SNP barcoding (DTSB) algorithm where SNP patterns are selected from the DNA barcoding sequence of several evolutionarily related species in order to identify a single species with pigeons as an example. This approach can make use of any established barcoding system. We here firstly used as an example the mitochondrial gene COI information of 17 pigeon species (Columbidae, Aves) using DTSB after sequence trimming and alignment. SNPs were chosen which followed the rule of decision tree and species‐specific SNP barcodes. The shortest barcode of about 11 bp was then generated for discriminating 17 pigeon species using the DTSB method. This method provides a sequence alignment and tree decision approach to parsimoniously assign a unique and shortest SNP barcode for any known species of a chosen monophyletic taxon where a barcoding sequence is available.     

An update on DNA barcoding: low species coverage and numerous unidentified sequences

DNA barcoding was proposed in 2003, the Consortium for the Barcode of Life was established in 2004, and the movement has since attracted more than $80 million funding. Here we investigate how many species of multicellular animals have been barcoded. We compare the numbers in a public database (GenBank as of January 2012) with those in the Barcode of Life Database (BOLD) and find that GenBank contains COI (cytochrome c oxidase subunit 1) sequences for ca. 60 000 species while BOLD reports barcodes for ca. 150 000 species. The discrepancy is likely due to a large amount of unpublished data in BOLD. Overall, the species coverage remains sparse, growth rates are low, and the barcode accumulation curve for Metazoa is linear with only 4788 species having been added in 2011. In addition, the vast majority of species in the public database (73%) were barcoded by projects that are unlikely to be related to the DNA barcoding movement. Particularly surprising was the large number of DNA barcodes in GenBank that were not identified to species (Jan 2012: 74%), with insect barcodes often being identified only to order. Of these several hundred thousand have since been suppressed by NCBI because they did not satisfy the iBOL/GenBank early release agreement. Species coverage is considerably better for target taxa of DNA barcoding campaigns (e.g. birds, fishes, Lepidoptera), although it also falls short of published campaign targets. © The Willi Hennig Society 2012     

DNA barcoding of Scandinavian birds reveals divergent lineages in trans-Atlantic species

Birds are a taxonomically well-described group of animals, yet DNA barcoding, i.e., the molecular characterization of species using a standardized genetic marker, has revealed unexpected patterns of genetic divergences among North American birds. We performed a comprehensive COI (cytochrome c oxidase subunit I) barcode survey of 296 species of Scandinavian birds, and compared genetic divergences among 78 trans-Atlantic species whose breeding ranges include both Scandinavia and North America. Ninety-four percent of the Scandinavian species showed unique barcode clusters; the remaining 6% had overlapping barcodes with one or more congeneric species, which may reflect incomplete lineage sorting or a single gene pool. Four species showed large intra-specific divergences within Scandinavia, despite no apparent morphological differentiation or indications of reproductive isolation. These cases may reflect admixture of previously isolated lineages, and may thus warrant more comprehensive phylogeographic analyses. Nineteen (24%) of 78 trans-Atlantic species exhibited divergent genetic clusters which correspond with regional subspecies. Three of these trans-Atlantic divergences were paraphyletic. Our study demonstrates the effectiveness of COI barcodes for identifying Scandinavian birds and highlights taxa for taxonomic review. The standardized DNA barcoding approach amplified the power of our regional studies by enabling independently obtained datasets to be merged with the established avian barcode library.