Structures of the contryphan family of cyclic peptides. Role of electrostatic interactions in cis-trans isomerism

The contryphan family of cyclic peptides, isolated recently from various species of cone shell, has the conserved sequence motif NH(3)(+)-X(1)COD-WX(5)PWC-NH(2), where X(1) is either Gly or absent, O is 4-trans-hydroxyproline, and X(5) is Glu, Asp, or Gln. The solution structures described herein of two new naturally occurring contryphan sequences, contryphan-Sm and des[Gly1]-contryphan-R, are similar to those of contryphan-R, the structure of which has been determined recently [Pallaghy et al. (1999) Biochemistry 38, 11553-11559]. The (1)H NMR chemical shifts of another naturally occurring peptide, contryphan-P, indicate that it also adopts a similar structure. All of these contryphans exist in solution as a mixture of two conformers due to cis-trans isomerization about the Cys2-Hyp3 peptide bond. The lower cis-trans ratio for contryphan-Sm enabled elucidation of the 3D structure of both its major and its minor forms, for which the patterns of (3)J(H)(alpha)(HN) coupling constants are very different. As with contryphan-R, the structure of the major form of contryphan-Sm (cis Cys2-Hyp3 peptide bond) contains an N-terminal chain reversal and a C-terminal type I beta-turn. The minor conformer (trans peptide bond) forms a hairpin structure with sheetlike hydrogen bonds and a type II beta-turn, with the D-Trp4 at the 'Gly position' of the turn. The ratio of conformers arising from cis-trans isomerism around the peptide bond preceding Hyp3 is sensitive to both the amino acid sequence and the solution conditions, varying from 2.7:1 to 17:1 across the five sequences. The sequence and structural determinants of the cis-trans isomerism have been elucidated by comparison of the cis-trans ratios for these peptides with those for contryphan-R and an N-acetylated derivative thereof. The cis-trans ratio is reduced for peptides in which either the charged N-terminal ammonium or the X(5) side-chain carboxylate is neutralized, implying that an electrostatic interaction between these groups stabilizes the cis conformer relative to the trans. These results on the structures and cis-trans equilibrium of different conformers suggest a paradigm of 'locally determined but globally selected' folding for cyclic peptides and constrained protein loops, where the series of stereochemical centers in the loop dictates the favorable conformations and the equilibrium is determined by a small number of side-chain interactions.     

Solution structure of contryphan-R, a naturally occurring disulfide-bridged octapeptide containing D-tryptophan: comparison with protein loops.

Contryphan-R is a disulfide-constrained octapeptide containing a D-tryptophan that was isolated recently from venom of the cone shell Conus radiatus. The polypeptide is present in two forms in solution due to cis-trans isomerization at hydroxyproline 3. The solution structure of the major form of this unusual polypeptide, determined from NMR data, consists of a well-defined fold containing a non-hydrogen-bonded chain reversal from Gly1 to Glu5, which includes a cis-hydroxyproline and a D-Trp, and a type I beta-turn from Glu5 to Cys8. The presence of a putative salt bridge between the Glu5 carboxyl group and the N-terminal ammonium group is investigated by using various solvation models during energy minimization and is compared with the results of a pH titration. A comparison of the structure of contryphan-R with other cyclic peptide structures highlights some of the key structural determinants of these peptides and suggests that the contryphan-R fold could be exploited as a scaffold onto which unrelated protein binding surfaces could be grafted. Comparison with small disulfide-bridged loops in larger proteins shows that contryphan-R is similar to a commonly occurring loop structure found in proteins.     

A new cyclolinopeptide containing nonproteinaceous amino acid N-methyl-4-aminoproline

We have found that besides the known cyclolinopeptides A (CLA) and B (CLB), there is a new cyclic peptide in linseed mill cake that we have named CLX. Its composition is very similar to that of CLA, a cyclic peptide with a distinct immunosuppressive activity. The sequence of this peptide has been established as cyclo(PPFFILLX), where X is a non-proteinaceous amino acid, N-methyl-4-aminoproline. This amino acid substitutes for two amino acid residues of CLA, mimicking a dipeptide moiety with a nonplanar cis amide bond. The non-proteinaceous amino acid X may mimic a transition state of the peptide bond which exists in such processes as, e.g., PPIase-catalysed cis/trans amide-Pro bond isomerisation.     

A new cyclolinopeptide containing nonproteinaceous amino acid N-methyl-4-aminoproline

Summary We have found that besides the known cyclolinopeptides A (CLA) and B (CLB), there is a new cyclic peptide in linseed mill cake that we have named CLX. Its composition is very similar to that of CLA, a cyclic peptide with a distinct immunosuppressive activity. The sequence of this peptide has been established ascyclo(PPFFILLX), where X is a non-proteinaceous amino acid,N-methyl-4-aminoproline. this amino acid substitutes for two amino acid residues of CLA, mimicking a dipeptide moiety with a nonplanarcis amide bond. The non-proteinaceous amino acid X may mimic a transition state of the peptide bond which exists in such processes as, e.g., PPIase-catalysedcis/trans amide-Pro bond isomerisation.     

Evidence for the bioactive conformation in a cyclic hexapeptide analogue of somatostatin containing a cis-peptide bond mimic

N-methyl- alpha -benzyl-o-aminomethylphenylacetic acid was incorporated into a cyclic somatostatin analogue in order to mimic a cis-peptide bond configuration. The high biological potency of one of the isomers of the cyclic peptide strongly argues in favour of the proposed cis-configuration of the peptide bond at that position in the parent peptide. This represents the first cis-peptide bond mimic which has high biological activity.     

Solution structure of the cyclic peptide contryphan-Vn, a Ca2+-dependent K+ channel modulator

The solution structure of contryphan-Vn, a cyclic peptide with a double cysteine S-S bridge and containing a D-tryptophan extracted from the venom of the cone snail Conus ventricosus, has been determined by NMR spectroscopy using a variety of homonuclear and heteronuclear NMR methods and restrained molecular dynamics simulations. The main conformational features of backbone contryphan-Vn are a type IV beta-turn from Gly 1 to Lys 6 and a type I beta-turn from Lys 6 to Cys 9. As already found in other contryphans, one of the two prolines--the Pro4--is mainly in the cis conformation while Pro7 is trans. A small hydrophobic region probably partly shielded from solvent constituted from the close proximity of side chains of Pro7 and Trp8 was observed together with a persistent salt bridge between Asp2 and Lys6, which has been revealed by the diagnostic observation of specific nuclear Overhauser effects. The salt bridge was used as a restraint in the molecular dynamics in vacuum but without inserting explicit electrostatic contribution in the calculations. The backbone of the unique conformational family found of contryphan-Vn superimposes well with those of contryphan-Sm and contryphan-R. This result indicates that the contryphan structural motif represents a robust and conserved molecular scaffold whose main structural determinants are the size of the intercysteine loop and the presence and location in the sequence of the D-Trp and the two Pro residues.     

Hierarchy of simulation models in predicting molecular recognition mechanisms from the binding energy landscapes: structural analysis of the peptide complexes with SH2 domains.

Computer simulations using the simplified energy function and simulated tempering dynamics have accurately determined the native structure of the pYVPML, SVLpYTAVQPNE, and SPGEpYVNIEF peptides in the complexes with SH2 domains. Structural and equilibrium aspects of the peptide binding with SH2 domains have been studied by generating temperature-dependent binding free energy landscapes. Once some native peptide-SH2 domain contacts are constrained, the underlying binding free energy profile has the funnel-like shape that leads to a rapid and consistent acquisition of the native structure. The dominant native topology of the peptide-SH2 domain complexes represents an extended peptide conformation with strong specific interactions in the phosphotyrosine pocket and hydrophobic interactions of the peptide residues C-terminal to the pTyr group. The topological features of the peptide-protein interface are primarily determined by the thermodynamically stable phosphotyrosyl group. A diversity of structurally different binding orientations has been observed for the amino-terminal residues to the phosphotyrosine. The dominant native topology for the peptide residues carboxy-terminal to the phosphotyrosine is tolerant to flexibility in this region of the peptide-SH2 domain interface observed in equilibrium simulations. The energy landscape analysis has revealed a broad, entropically favorable topology of the native binding mode for the bound peptides, which is robust to structural perturbations. This could provide an additional positive mechanism underlying tolerance of the SH2 domains to hydrophobic conservative substitutions in the peptide specificity region.     

Dissecting a role of evolutionary-conserved but noncritical disulfide bridges in cysteine-rich peptides using ω-conotoxin GVIA and its selenocysteine analogs

Conotoxins comprise a large group of peptidic neurotoxins that use diverse disulfide-rich scaffolds. Each scaffold is determined by an evolutionarily conserved pattern of cysteine residues. Although many structure-activity relationship studies confirm the functional and structural importance of disulfide crosslinks, there is growing evidence that not all disulfide bridges are critical in maintaining activities of conotoxins. To answer the fundamental biological question of what the role of noncritical disulfide bridges is, we investigated function and folding of disulfide-depleted analogs of ω-conotoxin GVIA (GVIA) that belongs to an inhibitory cystine knot motif family and blocks N-type calcium channels. Removal of a noncritical Cys1-Cys16 disulfide bridge in GVIA or its selenopeptide analog had, as predicted, rather minimal effects on the inhibitory activity on calcium channels, as well as on in vivo activity following intracranial administration. However, the disulfide-depleted GVIA exhibited significantly lower folding yields for forming the remaining two native disulfide bridges. The disulfide-depleted selenoconotoxin GVIA analog also folded with significantly lower yields, suggesting that the functionally noncritical disulfide pair plays an important cooperative role in forming the native disulfide scaffold. Taken together, our results suggest that distinct disulfide bridges may be evolutionarily preserved by the oxidative folding or/and stabilization of the bioactive conformation of a disulfide-rich scaffold.     

De novo design of peptide immunogens that mimic the coiled coil region of human T-cell leukemia virus type-1 glycoprotein 21 transmembrane subunit for induction of native protein reactive neutralizing antibodies

Peptide vaccines able to induce high affinity and protective neutralizing antibodies must rely in part on the design of antigenic epitopes that mimic the three-dimensional structure of the corresponding region in the native protein. We describe the design, structural characterization, immunogenicity, and neutralizing potential of antibodies elicited by conformational peptides derived from the human T-cell leukemia virus type 1 (HTLV-1) gp21 envelope glycoprotein spanning residues 347-374. We used a novel template design and a unique synthetic approach to construct two peptides (WCCR2T and CCR2T) that would each assemble into a triple helical coiled coil conformation mimicking the gp21 crystal structure. The peptide B-cell epitopes were grafted onto the epsilon side chains of three lysyl residues on a template backbone construct consisting of the sequence acetyl-XGKGKGKGCONH2 (where X represents the tetanus toxoid promiscuous T cell epitope (TT) sequence 580-599). Leucine substitutions were introduced at the a and d positions of the CCR2T sequence to maximize helical character and stability as shown by circular dichroism and guanidinium hydrochloride studies. Serum from an HTLV-1-infected patient was able to recognize the selected epitopes by enzyme-linked immunosorbent assay (ELISA). Mice immunized with the wild-type sequence (WCCR2T) and the mutant sequence (CCR2T) elicited high antibody titers that were capable of recognizing the native protein as shown by flow cytometry and whole virus ELISA. Sera and purified antibodies from immunized mice were able to reduce the formation of syncytia induced by the envelope glycoprotein of HTLV-1, suggesting that antibodies directed against the coiled coil region of gp21 are capable of disrupting cell-cell fusion. Our results indicate that these peptides represent potential candidates for use in a peptide vaccine against HTLV-1.     

Novel peptides from assassin bugs (Hemiptera: Reduviidae): isolation, chemical and biological characterization.

Three novel peptides were isolated from the venomous saliva of predatory reduviids. They were identified by mass spectrometry and HPLC analysis and consist of 34-36 amino acid residues. They are relatively homologous to the calcium channel blockers omega-conotoxins from marine cone snails and belong to the four-loop Cys scaffold structural class. Ptu1, the shortest peptide, was chemically synthesized (sPtu1) and co-eluted with its native form. Circular dichroism spectra of the sPtu1 showed a high content of beta-turns similar to that of omega-conotoxins GVIA and MVIIA. Electrophysiological experiments demonstrated that sPtu1 reversibly blocks the N-type calcium channels expressed in BHK cells.     

High‐resolution structures of collagen‐like peptides [(Pro‐Pro‐Gly)4‐Xaa‐Yaa‐Gly‐(Pro‐Pro‐Gly)4]: Implications for triple‐helix hydration and Hyp(X) puckering

Structures of (Pro‐Pro‐Gly)₄‐Xaa‐Yaa‐Gly‐(Pro‐Pro‐Gly)₄ (ppg9‐XYG) where (Xaa, Yaa) = (Pro, Hyp), (Hyp, Pro) or (Hyp, Hyp) were analyzed at high resolution using synchrotron radiation. Molecular and crystal structures of these peptides are very similar to those of the (Pro‐Pro‐Gly)₉ peptide. The results obtained in this study, together with those obtained from related compounds, indicated the puckering propensity of the Hyp in the X position: (1) Hyp(X) residues involved in the Hyp(X):Pro(Y) stacking pairs prefer the down‐puckering conformation, as in ppg9‐OPG, and ppg9‐OOG; (2) Hyp(X) residues involved in the Hyp(X):Hyp(Y) stacking pairs prefer the up‐puckering conformation if there is no specific reason to adopt the down‐puckering conformation. Water molecules in these peptide crystals are classified into two groups, the 1st and 2nd hydration waters. Water molecules in the 1st hydration group have direct hydrogen bonds with peptide oxygen atoms, whereas those in the 2nd hydration group do not. Compared with globular proteins, the number of water molecules in the 2nd hydration shell of the ppg9‐XYG peptides is very large, likely due to the unique rod‐like molecular structure of collagen model peptides. In the collagen helix, the amino acid residues in the X and Y positions must protrude outside of the triple helix, which forces even the hydrophobic side chains, such as Pro, to be exposed to the surrounding water molecules. Therefore, most of the waters in the 2nd hydration shell are covering hydrophobic Pro side chains by forming clathrate structures. © 2009 Wiley Periodicals, Inc. Biopolymers 91: 361–372, 2009. This article was originally published online as an accepted preprint. The “Published Online” date corresponds to the preprint version. You can request a copy of the preprint by emailing the Biopolymers editorial office at biopolymers@wiley.com     

The crystal structure of a collagen-like polypeptide with 3(S)-hydroxyproline residues in the Xaa position forms a standard 7/2 collagen triple helix

Collagen has a triple helical structure comprising strands with a repeating Xaa-Yaa-Gly sequence. L-Proline (Pro) and 4(R)-hydroxyl-L-proline (4(R)Hyp) residues are found most frequently in the Xaa and Yaa positions. However, in natural collagen, 3(S)-hydroxyl-L-proline (3(S)Hyp) occurs in the Xaa positions to varying extents and is most common in collagen types IV and V. Although 4(R)Hyp residues in the Yaa positions have been shown to be critical for the formation of a stable triple helix, the role of 3(S)Hyp residues in the Xaa position is not well understood. Indeed, recent studies have demonstrated that the presence of 3(S)Hyp in the Xaa positions of collagen-like peptides actually has a destabilizing effect relative to peptides with Pro in these locations. Whether this destabilization is reflected in a local unfolding or in other structural alterations of the collagen triple helix is unknown. Thus, to determine what effect the presence of 3(S)Hyp residues in the Xaa positions has on the overall conformation of the collagen triple helix, we determined the crystal structure of the polypeptide H-(Gly-Pro-4(R)Hyp)3-(Gly-3(S)Hyp-4(R)Hyp)2-(Gly-Pro-4(R)Hyp)4-OH to 1.80 A resolution. The structure shows that, despite the presence of the 3(S)Hyp residues, the peptide still adopts a typical 7/2 superhelical symmetry similar to that observed in other collagen structures. The puckering of the Xaa position 3(S)Hyp residues, which are all down (Cgamma-endo), and the varphi/psi dihedral angles of the Xaa 3(S)Hyp residues are also similar to those of typical collagen Pro Xaa residues. Thus, the presence of 3(S)Hyp in the Xaa positions does not lead to large structural alterations in the collagen triple helix.     

Ring conformation of cyclic octapeptide cyclo (L-Pro-Sar)4 in the crystalline state

A single-crystal X-ray diffraction analysis has been made of the structure of the cyclic octapeptide cyclo(L-Pro-Sar)4. The material [C32H48O8N8 X (21/4) H2O X (1/2) CH3OH, Mr = 799.43] crystallizes in the monoclinic space group C2 with cell dimensions a = 14.544 (3), b = 11.902 (2), c = 14.064 (3), and beta = 122.26 (2) degrees (lambda = 1.54178 A, T = 293 K). The final R value for the 1980 observed reflections is 0.079. The ring conformation has the peptide bond sequences of cis-cis-trans-trans-cis-cis-trans-trans (Pro-Sar-Pro peptide bond linkages are cis-cis- or trans-trans). The pyrrolidine rings in the four proline residues take an envelope form in which the gamma-carbon atom deviates from the plane of the remaining four atoms in the ring.     

Conformational studies of two bradykinin antagonists by using two-dimensional NMR techniques and molecular dynamics simulations

The solution conformations of two potent antagonists of bradykinin (Arg1-Pro2-Pro3-Gly4-Phe5-Ser6-Pro7-Phe8-Arg9), [Aca(-1),DArg0,Hyp3,Thi5,DPhe7,(N-Bzl)Gly8]BK (1) and [Aaa(-1),DArg0,Hyp3,Thi5,(2-DNal)7,Thi8]BK (2), were studied by using 2D NMR spectroscopy in DMSO-d6 and molecular dynamics simulations. The NMR spectra of peptide 1 reveals the existence of at least two isomers arising from isomerization across the DPhe7-(N-Bzl)Gly8 peptide bond. The more populated isomer possesses the cis peptide bond at this position. The ratio of cis/trans isomers amounted to 7:3. With both antagonists, the NMR data indicate a beta-turn structure for the Hyp3-Gly4 residues. In addition, for peptide 2, position 2,3 is likely to be occupied by turn-like structures. The cis peptide bond between DPhe7 and (N-Bzl)Gly8 in analogue 1 suggests type VI beta-turn at position 7,8. The molecular dynamics runs were performed on both peptides in DMSO solution. The results indicate that the structure of peptide 1 is characterized by type VIb beta-turn comprising residues Ser6-Arg9 and the betaI or betaII-turn involving the Pro2-Thi5 fragment, whereas peptide 2 shows the tendency towards the formation of type I beta-turn at position 2,3. The structures of both antagonists are stabilized by a salt bridge between the guanidine moiety of Arg1 and the carboxyl group of Arg9. Moreover, the side chain of DArg0 is apart of the rest of molecule and is not involved in structural elements except for a few calculated structures.     

The triple helical structure and stability of collagen model peptide with 4(S)-hydroxyprolyl-Pro-Gly units

Extensive studies on the structure of collagen have revealed that the hydroxylation of Pro residues in a variety of model peptides with the typical (X-Y-Gly)(n) repeats (X and Y: Pro and its analogues) represents one of the major factors influencing the stability of triple helices. While(2S,4R)-hydroxyproline (Hyp) at the position Y stabilizes the triple helix, (2S,4S)-hydroxyproline (hyp) at the X-position destabilizes the helix as demonstrated that the triple helix of (hyp-Pro-Gly)(15) is less stable than that of (Pro-Pro-Gly)(15) and that a shorter peptide (hyp-Pro-Gly)(10) does not form the helix. To clarify the role of the hydroxyl group of Pro residues to play in the stabilization mechanism of the collagen triple helix, we synthesized and crystallized a model peptide (Pro-Hyp-Gly)(4) -(hyp-Pro-Gly)(2) -(Pro-Hyp-Gly)(4) and analyzed its structure by X-ray crystallography and CD spectroscopy. In the crystal, the main-chain of this peptide forms a typical collagen like triple helix. The majority of hyp residues take down pucker with exceptionally shallow angles probably to relieve steric hindrance, but the remainders protrude the hydroxyl group toward solvent with the less favorable up pucker to fit in a triple helix. There is no indication of the existence of an intra-molecular hydrogen bond between the hydroxyl moiety and the carbonyl oxygen of hyp supposed to destabilize the triple helix. We also compared the conformational energies of up and down packers of the pyrrolidine ring in Ac-hyp-NMe(2) by quantum mechanical calculations.     

Determination of the membrane contact residues and solution structure of the helix F/G loop of prostaglandin I2 synthase

From our topological arrangement model of prostaglandin I(2) synthase (PGIS) created by homology modeling and topology studies, we hypothesized that the helix F/G loop of PGIS contains a membrane contact region distinct from the N-terminal membrane anchor domain. To provide direct experimental data we have explored the relationship between the endoplasmic reticulum (ER) membrane and the PGIS F/G loop using a constrained synthetic peptide to mimic PGIS residues 208-230 cyclized on both ends through a disulfide bond with added Cys residues. The solution structure and the residues important for membrane contact of the constrained PGIS F/G loop peptide were investigated by high-resolution 1H two-dimensional nuclear magnetic resonance (2D NMR) experiments and a spin label incorporation technique. Through the combination of 2D NMR experiments in the presence of dodecylphosphocholine (DPC) micelles used to mimic the membrane environment, complete 1H NMR assignments of the F/G loop segment have been obtained and the solution structure of the peptide has been determined. The PGIS F/G loop segment shows a defined helix turn helix conformation, which is similar to the three-dimensional crystallography structure of P450BM3 in the corresponding region. The orientation and the residues contacted with the membrane of the PGIS F/G loop were evaluated from the effect of incorporation of a spin-labeled 12-doxylstearate into the DPC micelles with the peptide. Three residues in the peptide corresponding to the PGIS residues L217 (L11), L222 (L16), and V224 (V18) have been demonstrated to contact the DPC micelles, which implies that the residues are involved in contact with the ER membrane in the native membrane-bound PGIS. These results provided the first experimental evidence to localize the membrane contact residues in the F/G loop region of microsomal P450 and are valuable to further define and understand the membrane topology of PGIS and those of other microsomal P450s in the native membrane environment.     

Effect of hydration on the stability of the collagen-like triple-helical structure of [4(R)-hydroxyprolyl-4(R)-hydroxyprolylglycine]10

X-ray analysis has been carried out on a crystal of the collagen model peptide (Hyp(R)-Hyp(R)-Gly)10 [where Hyp(R) is 4(R)-hydroxyproline] with 1.5 A resolution. The triple-helical structure of (Hyp(R)-Hyp(R)-Gly)10 has the same helical parameters and Rich and Crick II hydrogen bond patterns as those of other collagen model peptides. However, our full-length crystal structure revealed that almost all consecutive Hyp(R) residues take the up-up pucker in contrast to putative down-up puckering propensities of other collagen model peptides. The unique feature of thermodynamic parameters associated with the conformational transition of this peptide from triple helix to single coil is that both enthalpy and entropy changes of the transition are much smaller than those of other model peptides such as (Pro-Pro-Gly)10 and (Pro-Hyp(R)-Gly)10. To corroborate the precise structural information including main- and side-chain dihedral angles and intra- and interwater bridge networks, we estimated the degrees of hydration by comparing molecular volumes observed experimentally in solution to those calculated ones from the crystal structure. The results showed that the degree of hydration of (Hyp(R)-Hyp(R)-Gly)10 is comparable to that of (Pro-Hyp(R)-Gly)10 in the triple-helical state, but the former was more highly hydrated than (Pro-Hyp(R)-Gly)10 in the single-coil state. Because hydration reduces the enthalpy due to the formation of a hydrogen bond with a water molecule and diminishes the entropy due to the restriction of water molecules surrounding a peptide molecule, we concluded that the high thermal stability of (Hyp(R)-Hyp(R)-Gly)10 is able to be described by its high hydration in the single-coil state.     

In situ maleimide bridging of disulfides and a new approach to protein PEGylation

The introduction of non-natural entities into proteins by chemical modification has numerous applications in fundamental biological science and for the development and manipulation of peptide and protein therapeutics. The reduction of native disulfide bonds provides a convenient method to access two nucleophilic cysteine residues that can serve as ideal attachment points for such chemical modification. The optimum bioconjugation strategy utilizing these cysteine residues should include the reconstruction of a bridge to mimic the role of the disulfide bond, maintaining structure and stability of the protein. Furthermore, the bridging chemical modification should be as rapid as possible to prevent problems associated with protein unfolding, aggregation, or disulfide scrambling. This study reports on an in situ disulfide reduction-bridging strategy that ensures rapid sequestration of the free cysteine residues in a bridge, using dithiomaleimides. This approach is then used to PEGylate the peptide hormone somatostatin and retention of biological activity is demonstrated.     

Stabilization of triple-helical structures of collagen peptides containing a Hyp-Thr-Gly, Hyp-Val-Gly, or Hyp-Ser-Gly sequence

The single-crystal structures of three collagen-like host-guest peptides, (Pro-Pro-Gly)(4) -Hyp-Yaa-Gly-(Pro-Pro-Gly)(4) [Yaa = Thr, Val, Ser; Hyp = (4R)-4-hydroxyproline] were analyzed at atomic resolution. These peptides adopted a 7/2-helical structure similar to that of the (Pro-Pro-Gly)(9) peptide. The stability of these triple helices showed a similar tendency to that observed in Ac-(Gly-Hyp-Yaa)(10) -NH(2) (Yaa = Thr, Val, Ser) peptides. On the basis of their detailed structures, the differences in the triple-helical stabilities of the peptides containing a Hyp-Thr-Gly, Hyp-Val-Gly, or Hyp-Ser-Gly sequence were explained in terms of van der Waals interactions and dipole-dipole interaction between the Hyp residue in the X position and the Yaa residue in the Y position involved in the Hyp(X):Yaa(Y) stacking pair. This idea also explains the inability of Ac-(Gly-Hyp-alloThr)(10) -NH(2) and Ac-(Gly-Hyp-Ala)(10) -NH(2) peptides to form triple helices. In the Hyp(X):Thr(Y), Hyp(X):Val(Y), and Hyp(X):Ser(Y) stacking pairs, the proline ring of the Hyp residues adopts an up-puckering conformation, in agreement with the residual preference of Hyp, but in disagreement with the positional preference of X in the Gly-Xaa-Yaa sequence.