Genotoxic effects of volatile organic compounds in a chemical factory as evaluated by the Tradescantia micronucleus assay and by chemical analysis

The clastogenic effects of volatile organic compounds in the workplace air of a chemical factory were studied by means of the Tradescantia micronucleus (Trad-MCN) assay and chemical analysis. Sampling was performed at a chemical factory producing PVC film in Cheong-ju, South Korea. Inflorescences of Tradescantia BNL 4430 were placed for 2, 6, and 9 h at the height of 1.40 m at two locations in the workplace and one outdoor of the chemical industry. Air samplings were conducted in the same places and the collected tube samples were analyzed by automatic thermal desorption/gas chromatography/mass spectrometry (ATD/GC/MS). The frequencies of micronuclei in specimens exposed for 2 h in sites 1-3 were 6.13 +/- 0.47, 5.40 +/- 1.60, and 2.93 +/- 0.43 MCN per 100 tetrads, respectively. GC/MS analysis proved the presence of various volatile organic compounds such as trichloroethylene, toluene, ethyl benzene, (m, p, o)-xylene, styrene, 1,3,5-trimethyl benzene, and 1,2,4-trimethyl benzene. Mean values of toluene measured by 2 h sampling in sites 1-3 were 1946.6, 1368.3, and 340.1 microg/m3, respectively. The toluene concentrations in sites 1 and 2 were at least four to six times higher than that in site 3. The micronucleus frequencies increased with exposure time. In addition, there was a correlation between the micronucleus frequencies and toluene concentration in the air (R2 = 0.96). The results of this in situ monitoring proved the applicability of the Trad-MCN assay combined with chemical analysis for monitoring genotoxic chemicals in the work environment.     

Potentiometric sensor for on line glucose determination

Summary An enzymatic biosensor, with a flow-through sensor for continuous monitoring of glucose coupled to a Flow Injection Analysis (FIA) sampling line has been used to determine glucose over the range of 5 to 120 g/l. without sample dilution. The system can analyse 10 samples per hour. Calibration and reproducibility analysis have shown a good linearity and excellent results as compared to a commercial glucose analyser.     

Application of an Escherichia coli green fluorescent protein-based lysine biosensor under nonsterile conditions and autofluorescence background

AIMS: To examine the utility of an Escherichia coli green fluorescent protein (GFP) containing biosensor for quantification of bioavailable lysine in selected feed samples under nonsterile conditions and to estimate the background fluorescence of analyzed feed samples and evaluate the risk of confounding GFP emission from the lysine assay organism. METHODS AND RESULTS: Escherichia coli lysine auxotroph GFP based biosensor was used to determine the percentage of bioavailable lysine in two samples of soybean-, cottonseed-, and meat and bone meal under nonsterile conditions. The fluorescence emitted by GFP was successfully measured using a spectrofluorimeter to monitor bacterial growth response to protein-derived lysine and lysine containing small peptides. The autofluorescence of analyzed feed samples at different concentrations could also be estimated. CONCLUSIONS: When feed protein concentrations are decreased, autofluorescence interference can be avoided. SIGNIFICANCE: The E. coli lysine auxotroph GFP-based biosensor can successfully be used for the determination of bioavailable lysine in these selected animal feed proteins under nonsterile conditions. IMPACT OF THE STUDY: E. coli GFP biosensor for lysine has potential for routine application in animal feeds.     

The use of single walled carbon nanotubes dispersed in a chitosan matrix for preparation of a galactose biosensor

Chitosan was chosen as a natural polymer for dispersion of single walled carbon nanotubes (SWNT) based on its ability to efficiently solubilize SWNTs to form a stable dispersion. Moreover, chitosan films deposited on a surface of a glassy carbon (GC) electrode are mechanically stable. Further stabilisation of the chitosan film containing SWNT (CHIT-SWNT) was done by chemical crosslinking with glutaraldehyde and free aldehyde groups produced a substrate used for covalent immobilisation of galactose oxidase (GalOD). Different galactose biosensor configurations were tested with optimisation of composition of inner and outer membrane; and enzyme immobilisation procedure, as well. Detection of oxygen uptake by GalOD on CHIT-SWNT layer at -400 mV is robust and, when flow injection analysis (FIA) was applied for assays, a low detection limit (25 microM) and very high assay throughput rate (150 h-1) was achieved. This new galactose biosensor offers highly reliable detection of galactose with R.S.D. well below 2% and it has been successfully applied to assaying galactose in a blood sample with recovery index between 101.2 and 102.7%.     

Bienzymatic amperometric biosensor for choline based on mediator thionine in situ electropolymerized within a carbon paste electrode

An amperometric enzyme biosensor for the determination of choline utilizing two enzymes, choline oxidase (CHOD) and horseradish peroxidase (HRP), is described. The biosensor consisted of CHOD cross-linked onto a HRP-immobilized carbon paste electrode. The biosensor was prepared by in situ electropolymerization of poly(thionine) within a carbon paste containing the enzyme HRP and thionine monomer and then CHOD was immobilized by using chitosan film through cross-linking with glutaraldehyde. The in situ electrogenerated poly(thionine) displays excellent electron transform efficiency between the enzyme HRP and the electrode surface, and the polymer enables improvement in enzyme immobilization within the paste. Several parameters such as the amount of thionine and enzyme, the applied potential, the pH, etc. have been studied. Amperometric detection of choline was realized at an applied potential of -0.2V vs saturated calomel electrode in 1/15M phosphate buffer solution (pH 7.4) with a linear response range between 5.0 x 10(-6) and 6.0 x 10(-4)M choline and a response time of 15s. When applied to the analysis of phosphatidylcholine in serum samples, a 0.997 correlation was obtained between the biosensor results and those obtained by a hospital method.     

On-line monitoring of glucose and/or lactate in a fermentation process using an expanded micro-bed flow injection analyser

A novel flow injection biosensor system for monitoring fermentation processes has been developed using an expanded micro bed as the enzyme reactor. An expanded bed reactor is capable of handling a mobile phase containing suspended matter like cells and cell debris. Thus, while the analyte is free to interact with the adsorbent, the suspended particulate matter passes through unhindered. With the use of a scaled down expanded bed in the flow injection analysis (FIA) system, it was possible to analyse samples directly from a fermentor without the pretreatment otherwise required to extract the analyte or remove the suspended cells. This technique, therefore, provides a means to determine the true concentrations of the metabolites in a fermentor, with more ease than possible with other techniques.Glucose oxidase immobilised on STREAMLINE was used to measure glucose concentration in a suspension of dead yeast cells. There was no interference from the cell particles even at high cell densities such as 15 gm dry weight per litre. The assay time was about 6 min. Accuracy and reproducibility of the system was found to be good. In another scheme, lactate oxidase was covalently coupled to STREAMLINE for expanded bed operation. With the on-line expanded micro bed FIA it was possible to follow the fermentation with Lactobacillus casei.     

Offline glucose biomonitoring in yeast culture by polyamidoamine/cysteamine-modified gold electrodes

This article deals with the use of pyranose oxidase (PyOx) and glucose oxidase (GOx) enzymes in amperometric biosensor design and their application in monitoring fermentation processes with the combination of flow injection analysis (FIA). The amperometric studies were carried out at -0.7 V by following the oxygen consumption due to the enzymatic reactions for both batch and FIA modes. Optimization studies (enzyme amounts and pH) and analytical parameters such as linearity, repeatability, effect of interference, storage, and operational stabilities have been studied. Under optimized conditions, for the PyOx-based biosensor, linear graph was obtained from 0.025 to 0.5 mM glucose in phosphate buffer (50 mM) at pH 7.0 with the equation of y = 3.358x + 0.028 and R(2) = 0.998. Linearity was found to be 0.01-1.0 mM in citrate buffer (50 mM and pH 4.0) with the equation of y = 1.539x + 0.181 and R(2) = 0.992 for the GOx biosensor. Finally, these biosensor configurations were further evaluated in a conventional flow injection system. Results from batch experiments provide a guide to design sensitive, stable, and interference-free biosensors for FIA mode. Biosensor stability, dynamic range, and repeatability were also studied in FIA conditions, and the applicability for the determination of glucose in fermentation medium could be successfully demonstrated. The FIA-combined glucose biosensor was used for the offline monitoring of yeast fermentation. The obtained results correlated well with HPLC measurements.     

Enzyme sensor-FIA-system for on-line monitoring of glucose, lactate and glutamine in animal cell cultures.

Enzyme sensors for glucose, lactate and glutamine were connected via flow-injection analysis (FIA) devices to two different bioprocesses. They were used for on-line process control of perfused bioreactor systems containing mammalian cell lines producing a monoclonal antibody and recombinant interleukin-2. The biosensor system gives direct access to important process data which can be used as control parameters for long term cell cultivation systems.     

Analysis of micromolar concentrations of glucose by an interference free flow injection based biosensor

A fast, sensitive, interference-free, single enzyme single reagent glucose biosensor, operated in flow injection analysis (FIA) mode, was developed. The method used involved formation of colored complex of titanium sulfate reagent with the peroxide generated by glucose oxidase immobilized in a packed bed reactor. The color developed was detected spectrophotometrically in a flow cuvette. The system could measure down to 0.5 mg glucose l^–1 and the response was reproducible and linear in the range 1 mg l^–1 to 100 mg l^–1. The analysis time for a 500 l sample was 35 s and was free of interference from a number of substances tested. Analysis results using an off-line batch kit were observed to be in agreement with the developed system for determination of glucose in blood plasma samples.     

An amperometric cellobiose dehydrogenase-based biosensor can be used for measurement of cellulase activity

The hemoflavoenzyme cellobiose dehydrogenase (CDH, EC 1.1.99.18) from Phanerochaete chrysosporium has been used in an amperometric redox polymer-based biosensor. Used in conjugation with a FIA system this biosensor can replace colorimetric assays for measuring cellobiose liberated from cellulose in a series of cellulase-containing samples. The biosensor gave the same result as the Somogyi-Nelson method in a less time-consuming and laborious manner. The two methods showed about the same precision.     

Reevaluation of the Griess method for determining NO/NO2- in aqueous and protein-containing samples.

Nitric oxide (NO) is an important intracellular and extracellular signal substance. Nitrite is one product of the oxidative metabolism of NO. The purpose of this study was to establish a simple method of determining nitrite (NO2-) to provide a means of estimating the endogenous formation of NO or NO2-. A flow injection analysis (FIA) based on the Griess reaction was developed for this purpose. Using a standard additive method, it is possible to eliminate matrix effects such as those that can occur in samples containing protein. This measuring method is suitable for measurements in effluates or protein-rich cellular supernatants. The sensitivity of the method is 2 nmol/L for samples in aqueous phases and 8 nmol/L for protein-containing phases. The two-point discrimination is 2 nmol/L. A linear correlation between nitrite and signal level can be demonstrated over a range of 0.002-5 micromol/L. Reproducibility, including sample preparation and analysis, can be specified with a coefficient of variation (C.V.) of 6.7%. Day-to-day variability for identical samples 0.8% (C.V.). This study presents examples of the application of this method (measurements in blood samples and in isolated perfused hearts) and compares them to established methods of measuring NO and NO2. We found the FIA method to be equally sensitive as NO measurement by means of oxyhemoglobin assay. The FIA method is seven times more sensitive than HPLC methods, and its design is significantly simpler. Compared to the traditional Griess method, its sensitivity is higher by a factor of 500. With its high sensitivity, high reproducibility, and its unsurpassed low susceptibility to interference, this method of analysis provides a means of reliably determining nitrite concentration as a marker of NO formation in various matrices. Therefore, it can be a valuable instrument in experimental and clinical studies to determine the physiologic and pathophysiologic relevance of NO.     

Determination of l-glutamate in various commercial soy sauce products using flow injection analysis with a modified electrode

A flow injection analysis (FIA) system with a modified electrode has been developed and optimized for determination of l-glutamate using l-glutamate oxidase (GLOD) (EC 1.4.3.11). GLOD was immobilized on controlled-pore glass using glutaraldehyde. The optimal potential applied on the working electrode was +700mV against a platinum (Pt) reference electrode. The optimal pH and flow rate of the carrier buffer were 7.4 and 1.5ml/min, respectively. A modified electrode was integrated into the FIA system in order to eliminate electroactive interference and it was used to determine l-glutamate in 39 samples of Thai commercial soy sauce products. The results obtained were compared with those obtained from enzymatic assay using glutamate dehydrogenase and those from a chromatographic assay using an amino acid analyser. Good correlations were observed amongst these methods. The results indicated that use of an FIA system with a modified electrode was able to eliminate electroactive interference and was applicable to the determination of l-glutamate in food samples. The modified FIA was faster and simpler than the more common methods of enzymatic and chromatographic analysis.     

A screen-printed, amperometric biosensor array incorporated into a novel automated system for the simultaneous determination of organophosphate pesticides

Organophosphate pesticides present serious risks to human and environmental health. A rapid reliable, economical and portable analytical system will be of great benefit in the detection and prevention of contamination. A biosensor array based on six acetylcholinesterase enzymes for use in a novel automated instrument incorporating a neural network program is described. Electrochemical analysis was carried out using chronoamperometry and the measurement was taken 10s after applying a potential of 0 V vs. Ag/AgCl. The total analysis time for the complete assay was less than 6 min. The array was used to produce calibration data with six organophosphate pesticides (OPs) in the concentration range of 10(-5) M to 10(-9) M to train a neural network. The output of the neural network was subsequently evaluated using different sample matrices. There were no detrimental matrix effects observed from water, phosphate buffer, food or vegetable extracts. Furthermore, the sensor system was not detrimentally affected by the contents of water samples taken from each stage of the water treatment process. The biosensor system successfully identified and quantified all samples where an OP was present in water, food and vegetable extracts containing different OPs. There were no false positives or false negatives observed during the evaluation of the analytical system. The biosensor arrays and automated instrument were evaluated in situ in field experiments where the instrument was successfully applied to the analysis of a range of environmental samples. It is envisaged that the analytical system could provide a rapid detection system for the early warning of contamination in water and food.     

Polypyrrole-hydrogel composites for the construction of clinically important biosensors.

The present study reports on the use of p(2-hydroxyethyl methacrylate) (pHEMA) in which polypyrrole and various oxidoreductase enzymes were physically entrapped to function as a viable matrix for the construction of clinically important amperometric biosensors. Glucose oxidase, cholesterol oxidase and galactose oxidase biosensors were constructed. Electrode-supported hydrogel films were prepared by UV polymerization of the HEMA component (containing the dissolved enzyme) followed immediately by electrochemical polymerization (+0.7V vs. Ag/AgCl) of the pyrrole component within the interstitial spaces of the pre-formed hydrogel network. The optimized glucose oxidase biosensor displayed a wide linear glucose response range (5.0 x 10(-5) to 2.0 x 10(-2) M), a detection limit (3S(y/x)/sensitivity) of 25 microM and a response time of 35-40 s. The analytical recovery of glucose in serum samples ranged from 98 to 102% with mean coefficients of variation of 4.4% (within-day analyses) and 5.1% (day-to-day analyses). All three sensors displayed good stabilities when stored desiccated in the absence of buffer (>9 months).     

A fluorescent glucose biosensor based on immobilized glucose oxidase on bamboo inner shell membrane

A fluorescent glucose biosensor was constructed by immobilizing glucose oxidase on a bamboo inner shell membrane with glutaraldehyde as a cross-linker. The detection scheme was based on the depletion of dissolved oxygen content upon exposure to glucose solution with a concomitant increase in the fluorescence intensity of an oxygen transducer, tris(4,7-diphenyl-1,10-phenanthroline)ruthenium(Pi) ditetrakis(4-chlorophenyl)borate. The enzyme immobilization, effect of pH, temperature and ionic strength have been studied in detail. The biosensor exhibited repeatable response to a 2.0 mM glucose solution with a relative standard deviation of 3.0% (n = 10). It showed good storage stability and maintained 95% of its initial response after it had been kept at 4 degrees C for 8 months. The biosensor has a linear response range of 0.0-0.6 mM glucose with a detection limit of 58 microM (S/N = 3). Common potential interferants in samples do not pose any significant interference on the response of the glucose biosensor. It was successfully applied to the determination of glucose content in some commercial wines and medical glucose injections.     

Direct electrochemistry of horseradish peroxidase bonded on a conducting polymer modified glassy carbon electrode

Direct electron transfer process of immobilized horseradish peroxidase (HRP) on a conducting polymer film, and its application as a biosensor for H2O2, were investigated by using electrochemical methods. The HRP was immobilized by covalent bonding between amino group of the HRP and carboxylic acid group of 5,2':5',2"-terthiophene-3'-carboxylic acid polymer (TCAP) which is present on a glassy carbon (GC). A pair of redox peaks attributed to the direct redox process of HRP immobilized on the biosensor electrode were observed at the HRPmid R:TCAPmid R:GC electrode in a 10 mM phosphate buffer solution (pH 7.4). The surface coverage of the HRP immobilized on TCAPmid R:GC was about 1.2 x 10(-12) mol cm(-2) and the electron transfer rate (ks) was determined to be 1.03 s(-1). The HRPmid R:TCAPmid R:GC electrode acted as a sensor and displayed an excellent specific electrocatalytic response to the reduction of H2O2 without the aid of an electron transfer mediator. The calibration range of H2O2 was determined from 0.3-1.5 mM with a good linear relation.     

Field-based and laboratory stable isotope probing surveys of the identities of both aerobic and anaerobic benzene-metabolizing microorganisms in freshwater sediment

Laboratory incubations of coal-tar waste-contaminated sediment microbial communities under relatively controlled physiological conditions were used to interpret results of a field-based stable isotope probing (SIP) assay. Biodegradation activity of 13C-benzene was examined by GC/MS determination of net 13CO2 production and by GC headspace analysis of benzene loss. Key experimental variables were: the site of the assays (laboratory serum-bottle incubations and in situ field sediments), benzene concentration (10, 36 or 200 p.p.m. in laboratory assays), and physiological conditions (anaerobic with or without sulfate or nitrate additions versus aerobic headspace or the uncontrolled field). In anaerobic laboratory incubations of benzene at 10 p.p.m., greater than 60% of the substrate was eliminated within 15 days. During anaerobic incubations of 200 p.p.m. benzene (70 days), 0.9% benzene mineralization occurred. When benzene (36 p.p.m.) was added to sediment with air in the serum-bottle headspace, 14% of the initial 13C was mineralized to 13CO2 in 2.5 days. In the field experiment (178 microg 13C-benzene dosed to undisturbed sediments), net 13CO2 production reached 0.3% within 8.5 h. After isopycnic separation of 13C (heavy)-labelled DNA from the above biodegradation assays, sequencing of 13C-DNA clone libraries revealed a broad diversity of taxa involved in benzene metabolism and distinctive libraries for each biodegradation treatment. Perhaps most importantly, in the field SIP experiment the clone libraries produced were dominated by Pelomonas (betaproteobacteria) sequences similar to those found in the anaerobic 10 p.p.m. benzene laboratory experiment. These data indicate that the physiological conditions that prevail and govern in situ biodegradation of pollutants in the field may be interpreted by knowing the physiological preferences of potentially active populations.     

The use of differential measurements with a glucose biosensor for interference compensation during glucose determinations by flow injection analysis

A novel detection system for the determination of glucose in the presence of clinically important interferents, based on the use of dual sensors and flow-injection analysis (FIA), is described. The normalisation methodology involves measurement of the interference signal at a reference sensor; this signal can then be subtracted from the glucose sensor signal (post-run) to give a corrected measurement of the glucose concentration. The detection system consists of a thin layer cell with dual glassy carbon working electrodes. One electrode was surface modified to act asglucose biosensor by immobilisation of glucose oxidase (GOx) (from Aspergillus niger) with 1% glutaraldehyde and bovine serum albumin. The second electrode (glucose oxidase omitted) was utilised to measure the interference signal responding only to electroactive species present in the injected sample. A computer controlled multichannel potentiostat was used for potential application and current monitoring duties. The sensor responses were saved in ASCII format to facilitate post-run analysis in Microsoft Excel. Cyclic voltammetry (CV) was utilised to investigate the manner in which the interference signal contributed to the total signal obtained at the biosensor in the presence of glucose. The kinetic parameters I_max and the apparent Michaelis-Menten constant, K′_m, were calculated for the sensor operating under flow-injection conditions.     

Application of hydrophobic palladium nanoparticles for the development of electrochemical glucose biosensor

An amperometric glucose biosensor based on an n-alkylamine-stabilized palladium nanoparticles (PdNPs)-glucose oxidase (GOx) modified glassy carbon (GC) electrode has been successfully fabricated. PdNPs were initially synthesized by a biphase mixture of water and toluene method using n-alkylamines (dodecylamine, C??-NH? and octadecylamine, C??-NH?) as stabilizing ligands. The performance of the PdNPs-GOx/GC biosensor was studied by cyclic voltammetry. The optimum working potential for amperometric measurement of glucose in pH 7.0 phosphate buffer solution is -0.02 V (vs. Ag/AgCl). The analytical performance of the biosensor prepared from C??-PdNPs-GOx is better than that of C??-PdNPs-GOx. The C??-PdNPs-GOx/GC biosensor exhibits a fast response time of ca. 3s, a detection limit of 3.0 μM (S/N=3) and a linear range of 3.0 μM-8.0 mM. The linear dependence of current density with glucose concentration is 70.8 μA cm?2 mM?1. The biosensor shows good stability, repeatability and reproducibility. It has been successfully applied to determine the glucose content in human blood serum samples.     

A high density microelectrode array biosensor for detection of E. coli O157:H7

A high density microelectrode array biosensor was developed for the detection of Escherichia coli O157:H7. The biosensor was fabricated from (100) silicon with a 2 microm layer of thermal oxide as an insulating layer, an active area of 9.6 mm2 and consists of an interdigitated gold electrode array. The sensor surface was functionalised for bacterial detection using heterobifunctional crosslinkers and immobilised polyclonal antibodies to create a biological sensing surface. Bacteria suspended in solution became attached to the immobilised antibodies when the biosensor was tested in liquid samples. The change in impedance caused by the bacteria was measured over a frequency range of 100 Hz-10 M Hz. The biosensor was evaluated for E. coli O157:H7 detection in pure culture and inoculated food samples. The biosensor was able to discriminate between cellular concentrations of 10(4)-10(7)CFU/mL and has applications in detecting pathogens in food samples.