Raft-targeting and oligomerization of Parasporin-2, a bacillus thuringiensis crystal protein with anti-tumour activity

Parasporin-2 is a newly classified Bacillus thuringiensis crystal toxin with strong cytocidal activities toward human liver and colon cancer cells. Similar to other insecticidal B. thuringiensis crystal toxins, parasporin-2 shows target specificity and damages the cellular membrane. However, the mode of parasporin-2 actions toward the cell membrane remains unknown. Here, we show that this anti-tumour crystal toxin targets lipid rafts and assembles into oligomeric complexes in the membrane of human hepatocyte cancer (HepG2) cells. Upon incubation with HepG2 cells, peripheral membrane-bound toxins, which were recovered in a low-density detergent-resistant membrane fraction, i.e. with lipid rafts, were transformed into heat-stable SDS-resistant membrane-embedded oligomers (approximately 200 kDa). The toxin oligomerization was dependent on temperature and coupled with cell lysis. The toxin oligomerization also occurred in a cell-free membrane system and was required for binding to membrane proteins, the lipid bilayer and cholesterols. These results indicate that parasporin-2 is an oligomerizing and pore-forming toxin that accumulates in lipid rafts.     

The pre-pore from Bacillus thuringiensis Cry1Ab toxin is necessary to induce insect death in Manduca sexta

The insecticidal Cry toxins from Bacillus thuringiensis bacteria are pore-forming toxins that lyse midgut epithelial cells in insects. We have previously proposed that they form pre-pore oligomeric intermediates before membrane insertion. For formation of these oligomers coiled-coil structures are important, and helix alpha-3 from Cry toxins could form coiled-coils. Our data shows that different mutations in helix alpha-3 are affected in pore formation and toxicity. Mutants affected in toxicity bind Bt-R(1) receptor with a similar K(D) as the wild type toxin but do not form oligomers nor induce pore formation in planar lipid bilayers, indicating that the pre-pore oligomer is an obligate intermediate in the intoxication of Cry1Ab toxin and that interaction of monomeric Cry1Ab with Bt-R(1) is not enough to kill susceptible larvae.     

Bacillus thuringiensis Cry1Ab mutants affecting oligomer formation are non-toxic to Manduca sexta larvae

Pore-forming toxins are biological weapons produced by a variety of living organisms, particularly bacteria but also by insects, reptiles, and invertebrates. These proteins affect the cell membrane of their target, disrupting permeability and leading eventually to cell death. The pore-forming toxins typically transform from soluble, monomeric proteins to oligomers that form transmembrane channels. The Cry toxins produced by Bacillus thuringiensis are widely used as insecticides. These proteins have been recognized as pore-forming toxins, and their primary action is to lyse midgut epithelial cells in their target insect. To exert their toxic effect, a prepore oligomeric intermediate is formed leading finally to membrane-inserted oligomeric pores. To understand the role of Cry oligomeric pre-pore formation in the insecticidal activity we isolated point mutations that affected toxin oligomerization but not their binding with the cadherin-like, Bt-R(1) receptor. We show the helix alpha-3 in domain I contains sequences that could form coiled-coil structures important for oligomerization. Some single point mutants in this helix bound Bt-R(1) receptors with similar affinity as the wild-type toxin, but were affected in oligomerization and were severally impaired in pore formation and toxicity against Manduca sexta larvae. These data indicate the pre-pore oligomer and the toxin pore formation play a major role in the intoxication process of Cry1Ab toxin in insect larvae.     

Functional properties of the p33 and p55 domains of the Helicobacter pylori vacuolating cytotoxin

Helicobacter pylori secretes an 88-kDa vacuolating cytotoxin (VacA) that may contribute to the pathogenesis of peptic ulcer disease and gastric cancer. VacA cytotoxic activity requires assembly of VacA monomers into oligomeric structures, formation of anion-selective membrane channels, and entry of VacA into host cells. In this study, we analyzed the functional properties of recombinant VacA fragments corresponding to two putative VacA domains (designated p33 and p55). Immunoprecipitation experiments indicated that these two domains can interact with each other to form protein complexes. In comparison to the individual VacA domains, a mixture of the p33 and p55 proteins exhibited markedly enhanced binding to the plasma membrane of mammalian cells. Furthermore, internalization of the VacA domains was detected when cells were incubated with the p33/p55 mixture but not when the p33 and p55 proteins were tested individually. Incubation of cells with the p33/p55 mixture resulted in cell vacuolation, whereas the individual domains lacked detectable cytotoxic activity. Interestingly, sequential addition of p55 followed by p33 resulted in VacA internalization and cell vacuolation, whereas sequential addition in the reverse order was ineffective. These results indicate that both the p33 and p55 domains contribute to the binding and internalization of VacA and that both domains are required for vacuolating cytotoxic activity. Reconstitution of toxin activity from two separate domains, as described here for VacA, has rarely been described for pore-forming bacterial toxins, which suggests that VacA is a pore-forming toxin with unique structural properties.     

The identification and structure of the membrane-spanning domain of the Clostridium septicum alpha toxin

Alpha toxin (AT) is a pore-forming toxin produced by Clostridium septicum that belongs to the unique aerolysin-like family of pore-forming toxins. The location and structure of the transmembrane domains of these toxins have remained elusive. Using deletion mutagenesis, cysteine-scanning mutagenesis and multiple spectrofluorimetric methods a membrane-spanning amphipathic beta-hairpin of AT has been identified. Spectrofluorimetric analysis of cysteine-substituted residues modified with an environmentally sensitive fluorescent probe via the cysteine sulfydryl showed that the side chains of residues 203-232 alternated between the aqueous milieu and the membrane core when the AT oligomer was inserted into membranes, consistent with the formation of an amphipathic transmembrane beta-hairpin. AT derivatives that contained deletions that removed up to 90% of the beta-hairpin did not form a pore but were similar to native toxin in all other aspects of the mechanism. Furthermore, a mutant of AT that contained an engineered disulfide, predicted to restrict the movement of the beta-hairpin, functioned similarly to native toxin except that it did not form a pore unless the disulfide bond was reduced. Together these studies revealed the location and structure of the membrane-spanning domain of AT.     

Identification of functional domains of Clostridium septicum alpha toxin

Alpha toxin (AT) is the major virulence factor of Clostridium septicum that is a proteolytically activated pore-forming toxin that belongs to the aerolysin-like family of toxins. AT is predicted to be a three-domain molecule on the basis of its functional and sequence similarity with aerolysin, for which the crystal structure has been determined. In this study, we have substituted the entire primary structure of AT with alanine or cysteine to identify those amino acids that comprise functional domains involved in receptor binding, oligomerization, and pore formation. These studies revealed that receptor binding is restricted to domain 1 of the AT structure, whereas domains 1 and 3 are involved in oligomerization. These studies also revealed the presence of a putative functional region of AT proximal to the receptor-binding domain but distal from the pore-forming domain that is proposed to regulate the insertion of the transmembrane beta-hairpin of the prepore oligomer.     

Cysteine scanning mutagenesis of alpha4, a putative pore-lining helix of the Bacillus thuringiensis insecticidal toxin Cry1Aa

Helix alpha4 of Bacillus thuringiensis Cry toxins is thought to line the lumen of the pores they form in the midgut epithelial cells of susceptible insect larvae. To define its functional role in pore formation, most of the alpha4 amino acid residues were replaced individually by a cysteine in the Cry1Aa toxin. The toxicities and pore-forming abilities of the mutated toxins were examined, respectively, by bioassays using neonate Manduca sexta larvae and by a light-scattering assay using midgut brush border membrane vesicles isolated from M. sexta. A majority of these mutants had considerably reduced toxicities and pore-forming abilities. Most mutations causing substantial or complete loss of activity map on the hydrophilic face of the helix, while most of those having little or only relatively minor effects map on its hydrophobic face. The properties of the pores formed by mutants that retain significant activity appear similar to those of the pores formed by the wild-type toxin, suggesting that mutations resulting in a loss of activity interfere mainly with pore formation.     

The Protective Antigen Component of Anthrax Toxin Forms Functional Octameric Complexes

The assembly of bacterial toxins and virulence factors is critical to their function, but the regulation of assembly during infection has not been studied. We begin to address this question using anthrax toxin as a model. The protective antigen (PA) component of the toxin assembles into ring-shaped homooligomers that bind the two other enzyme components of the toxin, lethal factor (LF) and edema factor (EF), to form toxic complexes. To disrupt the host, these toxic complexes are endocytosed, such that the PA oligomer forms a membrane-spanning channel that LF and EF translocate through to enter the cytosol. Using single-channel electrophysiology, we show that PA channels contain two populations of conductance states, which correspond to two different PA pre-channel oligomers observed by electron microscopy—the well-described heptamer and a novel octamer. Mass spectrometry demonstrates that the PA octamer binds four LFs, and assembly routes leading to the octamer are populated with even-numbered, dimeric and tetrameric, PA intermediates. Both heptameric and octameric PA complexes can translocate LF and EF with similar rates and efficiencies. Here, we report a 3.2-Å crystal structure of the PA octamer. The octamer comprises ∼ 20-30% of the oligomers on cells, but outside of the cell, the octamer is more stable than the heptamer under physiological pH. Thus, the PA octamer is a physiological, stable, and active assembly state capable of forming lethal toxins that may withstand the hostile conditions encountered in the bloodstream. This assembly mechanism may provide a novel means to control cytotoxicity.     

Trapping of Vibrio cholerae Cytolysin in the Membrane-bound Monomeric State Blocks Membrane Insertion and Functional Pore Formation by the Toxin

Vibrio cholerae cytolysin (VCC) is a potent membrane-damaging cytolytic toxin that belongs to the family of β barrel pore-forming protein toxins. VCC induces lysis of its target eukaryotic cells by forming transmembrane oligomeric β barrel pores. The mechanism of membrane pore formation by VCC follows the overall scheme of the archetypical β barrel pore-forming protein toxin mode of action, in which the water-soluble monomeric form of the toxin first binds to the target cell membrane, then assembles into a prepore oligomeric intermediate, and finally converts into the functional transmembrane oligomeric β barrel pore. However, there exists a vast knowledge gap in our understanding regarding the intricate details of the membrane pore formation process employed by VCC. In particular, the membrane oligomerization and membrane insertion steps of the process have only been described to a limited extent. In this study, we determined the key residues in VCC that are critical to trigger membrane oligomerization of the toxin. Alteration of such key residues traps the toxin in its membrane-bound monomeric state and abrogates subsequent oligomerization, membrane insertion, and functional transmembrane pore-formation events. The results obtained from our study also suggest that the membrane insertion of VCC depends critically on the oligomerization process and that it cannot be initiated in the membrane-bound monomeric form of the toxin. In sum, our study, for the first time, dissects membrane binding from the subsequent oligomerization and membrane insertion steps and, thus, defines the exact sequence of events in the membrane pore formation process by VCC.     

Single molecule fluorescence study of the Bacillus thuringiensis toxin Cry1Aa reveals tetramerization

Pore-forming toxins constitute a class of potent virulence factors that attack their host membrane in a two- or three-step mechanism. After binding to the membrane, often aided by specific receptors, they form pores in the membrane. Pore formation either unfolds a cytolytic activity in itself or provides a pathway to introduce enzymes into the cells that act upon intracellular proteins. The elucidation of the pore-forming mechanism of many of these toxins represents a major research challenge. As the toxins often refold after entering the membrane, their structure in the membrane is unknown, and key questions such as the stoichiometry of individual pores and their mechanism of oligomerization remain unanswered. In this study, we used single subunit counting based on fluorescence spectroscopy to explore the oligomerization process of the Cry1Aa toxin of Bacillus thuringiensis. Purified Cry1Aa toxin molecules labeled at different positions in the pore-forming domain were inserted into supported lipid bilayers, and the photobleaching steps of single fluorophores in the fluorescence time traces were counted to determine the number of subunits of each oligomer. We found that toxin oligomerization is a highly dynamic process that occurs in the membrane and that tetramers represent the final form of the toxins in a lipid bilayer environment.     

Structural analysis of the Laetiporus sulphureus hemolytic pore-forming lectin in complex with sugars

LSL is a lectin produced by the parasitic mushroom Laetiporus sulphureus, which exhibits hemolytic and hemagglutinating activities. Here, we report the crystal structure of LSL refined to 2.6-A resolution determined by the single isomorphous replacement method with the anomalous scatter (SIRAS) signal of a platinum derivative. The structure reveals that LSL is hexameric, which was also shown by analytical ultracentrifugation. The monomeric protein (35 kDa) consists of two distinct modules: an N-terminal lectin module and a pore-forming module. The lectin module has a beta-trefoil scaffold that bears structural similarities to those present in toxins known to interact with galactose-related carbohydrates such as the hemagglutinin component (HA1) of the progenitor toxin from Clostridium botulinum, abrin, and ricin. On the other hand, the C-terminal pore-forming module (composed of domains 2 and 3) exhibits three-dimensional structural resemblances with domains 3 and 4 of the beta-pore-forming toxin aerolysin from the Gram-negative bacterium Aeromonas hydrophila, and domains 2 and 3 from the epsilon-toxin from Clostridium perfringens. This finding reveals the existence of common structural elements within the aerolysin-like family of toxins that could be directly involved in membrane-pore formation. The crystal structures of the complexes of LSL with lactose and N-acetyllactosamine reveal two dissacharide-binding sites per subunit and permits the identification of critical residues involved in sugar binding.     

Streptolysin O: the C-terminal, tryptophan-rich domain carries functional sites for both membrane binding and self-interaction but not for stable oligomerization

Streptolysin O belongs to the class of thiol-activated toxins, which are single chain, four-domain proteins that bind to membranes containing cholesterol and then assemble to form large oligomeric pores. Membrane binding involves a conserved tryptophan-rich sequence motif located within the C-terminally located domain 4. In contrast, sites involved in oligomerization and pore formation have been assigned to domains 1 and 3, respectively. We here examined the functional properties of domain 4, which was recombinantly expressed with an N-terminal histidine tag for purification and an additional cysteine residue for covalent labeling. The fluorescently labeled fragment readily bound to membranes, but it did not form oligomers nor lyse cell membranes. Moreover, the labeled fragment did not detectably become incorporated into hybrid oligomers when combined with lytically active full-length toxin. However, when present in large excess over the active toxin, the domain 4 fragment effected reduction of hemolytic activity and of functional pore size, which indicates interference with oligomerization of the lytically active species. Our findings support the notion that domain 4 of the streptolysin O molecule may fold autonomously, is essential for membrane binding and is capable not of irreversible but of reversible association with the entire toxin molecule.     

The single-giant unilamellar vesicle method reveals lysenin-induced pore formation in lipid membranes containing sphingomyelin

Lysenin is a sphingomyelin (SM)-binding pore-forming toxin. To reveal the interaction of lysenin with lipid membranes, we investigated lysenin-induced membrane permeation of a fluorescent probe, calcein, through dioleoylphosphatidylcholine(DOPC)/SM, DOPC/SM/cholesterol(chol), and SM/chol membranes, using the single-giant unilamellar vesicle (GUV) method. The results clearly show that lysenin formed pores in all the membranes, through which membrane permeation of calcein occurred without disruption of GUVs. The membrane permeation began stochastically, and the membrane permeability coefficient increased over time to reach a maximum, steady value, Ps, which persisted for a long time(100--500 s), indicating that the pore concentration increases over time and finally reaches its steady value, NP s . The Ps values increased as the SM/lysenin ratio decreased, and at low concentrations of lysenin, the Ps values of SM/DOPC/chol (42/30/28)GUVs were much larger than those of SM/DOPC (58/42) GUVs. The dependence of Ps on the SM/lysenin ratio for these membranes was almost the same as that of the fraction of sodium dodecyl sulfate (SDS)-resistant lysenin oligomers, indicating that NP s increases as the SDS-resistant oligomer fraction increases. On the other hand, lysenin formed pores in GUVs of SM/chol(60/40) membrane, which is in a homogeneous liquid-ordered phase, indicating that the phase boundary is not necessary for pore formation. The Ps values of SM/chol (60/40) GUVs were smaller than those of SM/DOPC/chol (42/30/28) GUVs even though the SDS-resistant oligomer fractions were similar for both membranes, suggesting that not all of the oligomers can convert into a pore. On the basis of these results, we discuss the elementary processes of lysenin-induced pore formation.     

Actin as target for modification by bacterial protein toxins

Various bacterial protein toxins and effectors target the actin cytoskeleton. At least three groups of toxins/effectors can be identified, which directly modify actin molecules. One group of toxins/effectors causes ADP-ribosylation of actin at arginine-177, thereby inhibiting actin polymerization. Members of this group are numerous binary actin-ADP-ribosylating exotoxins (e.g. Clostridium botulinum C2 toxin) as well as several bacterial ADP-ribosyltransferases (e.g. Salmonella enterica SpvB) which are not binary in structure. The second group includes toxins that modify actin to promote actin polymerization and the formation of actin aggregates. To this group belongs a toxin from the Photorhabdus luminescens Tc toxin complex that ADP-ribosylates actin at threonine-148. A third group of bacterial toxins/effectors (e.g. Vibrio cholerae multifunctional, autoprocessing RTX toxin) catalyses a chemical crosslinking reaction of actin thereby forming oligomers, while blocking the polymerization of actin to functional filaments. Novel findings about members of these toxin groups are discussed in detail.     

Aggregation of Bacillus thuringiensis Cry1A Toxins upon Binding to Target Insect Larval Midgut Vesicles

During sporulation, Bacillus thuringiensis produces crystalline inclusions comprised of a mixture of δ-endotoxins. Following ingestion by insect larvae, these inclusion proteins are solubilized, and the protoxins are converted to toxins. These bind specifically to receptors on the surfaces of midgut apical cells and are then incorporated into the membrane to form ion channels. The steps required for toxin insertion into the membrane and possible oligomerization to form a channel have been examined. When bound to vesicles from the midguts of Manduca sexta larvae, the Cry1Ac toxin was largely resistant to digestion with protease K. Only about 60 amino acids were removed from the Cry1Ac amino terminus, which included primarily helix α1. Following incubation of the Cry1Ab or Cry1Ac toxins with vesicles, the preparations were solubilized by relatively mild conditions, and the toxin antigens were analyzed by immunoblotting. In both cases, most of the toxin formed a large, antigenic aggregate of ca. 200 kDa. These toxin aggregates did not include the toxin receptor aminopeptidase N, but interactions with other vesicle components were not excluded. No oligomerization occurred when inactive toxins with mutations in amphipathic helices (α5) and known to insert into the membrane were tested. Active toxins with other mutations in this helix did form oligomers. There was one exception; a very active helix α5 mutant toxin bound very well to membranes, but no oligomers were detected. Toxins with mutations in the loop connecting helices α2 and α3, which affected the irreversible binding to vesicles, also did not oligomerize. There was a greater extent of oligomerization of the Cry1Ac toxin with vesicles from the Heliothis virescens midgut than with those from the M. sexta midgut, which correlated with observed differences in toxicity. Tight binding of virtually the entire toxin molecule to the membrane and the subsequent oligomerization are both important steps in toxicity.     

Intoxication strategy of Helicobacter pylori VacA toxin

VacA toxin from the cancer-inducing bacterium Helicobacter pylori is currently classified as a pore-forming toxin but is also considered a multifunctional toxin, apparently causing many pleiotropic cell effects. However, an increasing body of evidence suggests that VacA could be the prototype of a new class of monofunctional A-B toxins in which the A subunit exhibits pore-forming instead of enzymatic activity. Thus, VacA may use a peculiar mechanism of action, allowing it to intoxicate the human stomach. By combining the action of a cell-binding domain, a specific intracellular trafficking pathway and a novel mitochondrion-targeting sequence, the VacA pore-forming domain is selectively delivered to the inner mitochondrial membrane to efficiently kill target epithelial cells by apoptosis.     

Molecular biology of Bax and Bak activation and action

Bax and Bak are two nuclear-encoded proteins present in higher eukaryotes that are able to pierce the mitochondrial outer membrane to mediate cell death by apoptosis. Thus, organelles recruited by nucleated cells to supply energy can be recruited by Bax and Bak to kill cells. The two proteins lie in wait in healthy cells where they adopt a globular α-helical structure, seemingly as monomers. Following a variety of stress signals, they convert into pore-forming proteins by changing conformation and assembling into oligomeric complexes in the mitochondrial outer membrane. Proteins from the mitochondrial intermembrane space then empty into the cytosol to activate proteases that dismantle the cell. The arrangement of Bax and Bak in membrane-bound complexes, and how the complexes porate the membrane, is far from being understood. However, recent data indicate that they first form symmetric BH3:groove dimers which can be linked via an interface between the α6-helices to form high order oligomers. Here, we review how Bax and Bak change conformation and oligomerize, as well as how oligomers might form a pore. This article is part of a Special Issue entitled Mitochondria: the deadly organelle.     

Oligomerization of a membrane protein correlates with its retention in the Golgi complex

The first membrane-spanning domain (m1) of the M glycoprotein of avian coronavirus (formerly called E1) is sufficient to retain this protein in the cis-Golgi. When the membrane-spanning domain of a protein which is efficiently delivered to the plasma membrane (VSV G protein) is replaced with m1, the resulting chimera (Gm1) is retained in the Golgi (Swift, A. M., and C. E. Machamer. 1991. J. Cell Biol. 115:19-30). When assayed in sucrose gradients, we observed that Gm1 formed a large oligomer, and that much of this oligomer was SDS resistant and stayed near the top of the stacking gel of an SDS-polyacrylamide gel. The unusual stability of the oligomer allowed it to be detected easily. Gm1 mutants with single amino acid substitutions in the m1 domain that were retained in the Golgi complex formed SDS-resistant oligomers, whereas mutants that were rapidly released to the plasma membrane did not. Oligomerization was not detected immediately after synthesis of Gm1, but occurred gradually with a lag of approximately 10 min, suggesting that it is not merely aggregation of misfolded proteins. Furthermore, oligomerization did not occur under several conditions that block ER to Golgi transport. The lumenal domain was not required for oligomerization since another chimera (alpha m1G), where the lumenal domain of Gm1 was replaced by the alpha subunit of human chorionic gonadotropin, also formed an SDS-resistant oligomer, and was able to form hetero-oligomers with Gm1 as revealed by coprecipitation experiments. SDS resistance was conferred by the cytoplasmic tail of VSV G, because proteolytic digestion of the tail in microsomes containing Gm1 oligomers resulted in loss of SDS resistance, although the protease-treated material continued to migrate as a large oligomer on sucrose gradients. Interestingly, treatment of cells with cytochalasin D blocked formation of SDS-resistant (but not SDS- sensitive) oligomers. Our data suggest that SDS-resistant oligomers form as newly synthesized molecules of Gm1 arrive at the Golgi complex and may interact (directly or indirectly) with an actin-based cytoskeletal matrix. The oligomerization of Gm1 and other resident proteins could serve as a mechanism for their retention in the Golgi complex.     

Single channel evidence for innate pore-formation by Vibrio parahaemolyticus thermostable direct haemolysin (TDH) in phospholipid bilayers

Vibrio parahaemolyticus thermostable direct haemolysin (TDH) is widely considered to be a pore-forming toxin. The protein has no significant homology to other known pore-forming toxins and its mechanism of action in vivo remains undefined. We demonstrate single channel pore-forming activity of V. parahaemolyticus TDH in planar lipid bilayers. Channel conductance ranged between 30-450 pS in 0.5 M KCl with a calculated cation selectivity (P(K)/P(Cl)) of 2.7. Channels were formed in NaCl and choline-Cl with and without cholesterol present and in the presence of neutral or negatively charged phospholipids. Zinc ions did not block pore formation. Whilst various techniques have previously suggested that TDH is a pore-forming toxin, the data in this study provide direct single channel evidence and indicate several features of pore formation in synthetic phospholipid membranes.     

The HC fragment of tetanus toxin forms stable, concentration-dependent dimers via an intermolecular disulphide bond

Protein oligomerisation is a prerequisite for the toxicity of a number of bacterial toxins. Examples include the pore-forming cytotoxin streptolysin O, which oligomerises to form large pores in the membrane and the protective antigen of anthrax toxin, where a heptameric complex is essential for the delivery of lethal factor and edema factor to the cell cytosol. Binding of the clostridial neurotoxins to receptors on neuronal cells is well characterised, but little is known regarding the quaternary structure of these toxins and the role of oligomerisation in the intoxication process. We have investigated the oligomerisation of the receptor binding domain (H(C)) of tetanus toxin, which retains the binding and trafficking properties of the full-length toxin. Electrophoresis, size exclusion chromatography and mass spectrometry were used to demonstrate that H(C) undergoes concentration-dependent oligomerisation in solution. Reducing agents were found to affect H(C) oligomerisation and, using mutagenesis, Cys869 was shown to be essential for this process. Furthermore, the oligomeric state and quaternary structure of H(C) in solution was assessed using synchrotron small-angle X-ray scattering. Ab initio shape analysis and rigid body modelling coupled with mutagenesis data allowed the construction of an unequivocal model of dimeric H(C) in solution. We propose a possible mechanism for H(C) oligomerisation and discuss how this may relate to toxicity.