Characterization of new isolated <Emphasis Type="Italic">Ralstonia</Emphasis><Emphasis Type="Italic">eutropha</Emphasis> strain A-04 and kinetic study of biodegradable copolyester poly(3-hydroxybutyrate-<Emphasis Type="Italic">co</Emphasis>-4-hydroxybutyrate) production

A new isolated bacterial strain A-04 capable of producing high content of polyhydroxyalkanoates (PHAs) was morphologically and taxonomically identified based on biochemical tests and 16S rRNA gene analysis. The isolate is a member of the genus Ralstonia and close to Ralstonia eutropha. Hence, this study has led to the finding of a new and unexplored R. eutropha strain A-04 capable of producing PHAs with reasonable yield. The kinetic study of poly(3-hydroxybutyrate-co-4-hydroxybutyrate) [P(3HB-co-4HB)] production by the R. eutropha strain A-04 was examined using butyric acid and γ–hydroxybutyric acid as carbon sources. Effects of substrate ratio and mole ratio of carbon to nitrogen (C/N) on kinetic parameters were investigated in shake flask fed-batch cultivation. When C/N was 200, that is, nitrogen deficient condition, the specific production rate of 3-hydroxybutyrate (3HB) showed the highest value, whereas when C/N was in the range between 4 and 20, the maximum specific production rate of 4-hydroxybutyrate (4HB) was obtained. Thus, the synthesis of 3HB was growth-limited production under nitrogen-deficient condition, whereas the synthesis of 4HB was growth-associated production under nitrogen-sufficient condition. The mole fraction of 4HB units increased proportionally as the ratio of γ–hydroxybutyric acid in the feed medium increased at any value of C/N ratio. Based on these kinetic studies, a simple strategy to improve P(3HB-co-4HB) production in shake flask fed-batch cultivation was investigated using C/N and substrate feeding ratio as manipulating variable, and was successfully proved by the experiments. The nucleotide sequence 1,378 bp reported in this study will appear in the GenBank nucleotide sequence database under accession number EF988626.     

Production of copolymer poly(3-hydroxybutyrate-<Emphasis Type="Italic">co</Emphasis>-4-hydroxybutyrate) through a one-step cultivation process

A one-step cultivation process for the production of biodegradable polymer poly(3-hydroxybutyrate-co-4-hydroxybutyrate) [P(3HB-co-4HB)] by Cupriavidus sp. USMAA2-4 was carried out using various carbon sources. It was found that Cupriavidus sp. USMAA2-4 could produce approximately 44 wt.% copolymer of P(3HB-co-4HB) with 27 mol% 4HB composition when the combination of oleic acid and 1,4-butanediol are used as carbon sources in 60 h cultivation. The manipulation of carbon-to-nitrogen ratio (C/N) resulted in the increase of dry cell weight, PHA content as well as 4HB composition. A new strategy of introducing oleic acid and 1,4-butanediol together and separately at different concentration demonstrated different yield in PHA content ranging from 47 to 58 wt.%. The molecular weight obtained was 234 kDa (by adding 1,4-butanediol and oleic acid together) and 212 kDa (by adding 1,4-butanediol separately). The copolymer of P(3HB-co-4HB) produced by Cupriavidus sp. USMAA2-4 was detected statistically as a random copolymer when analysed by nuclear magnetic resonance (NMR) spectroscopy.     

Production of poly(3-hydroxybutyrate-<Emphasis Type="Italic">co</Emphasis>-3-hydroxyvalerate) P(3HB-<Emphasis Type="Italic">co</Emphasis>-3HV) with a broad range of 3HV content at high yields by <Emphasis Type="Italic">Burkholderia sacchari</Emphasis> IPT 189

The biosynthesis of poly(3-hydroxybutyrate-co-3-hydroxyvalerate) from sucrose and propionic acid by Burkholderia sacchari IPT 189 was studied using a two-stage bioreactor process. In the first stage, this bacterium was cultivated in a balanced culture medium until sucrose exhaustion. In the second stage, a solution containing sucrose and propionic acid as carbon source was fed to the bioreactor at various sucrose/propionic acid (s/p) ratios at a constant specific flow rate. Copolymers with 3HV content ranging from 40 down to 6.5 (mol%) were obtained with 3HV yield from propionic acid (Y _3HV/prop) increasing from 1.10 to 1.34 g g⁻¹. Copolymer productivity of 1 g l⁻¹ h⁻¹ was obtained with polymer biomass content rising up to 60% by increasing a specific flow rate at a constant s/p ratio. Increasing values of 3HV content were obtained by varying the s/p ratios. A simulation of production costs considering Y _3HV/prop obtained in the present work indicated that a reduction of up to 73% can be reached, approximating US$ 1.00 per kg which is closer to the value to produce P3HB from sucrose (US$ 0.75 per kg).     

Enhanced neurite outgrowth of rat neural cortical cells on surface-modified films of poly(lactic-<Emphasis Type="Italic">co</Emphasis>-glycolic acid)

Neural cortical cells, isolated from prenatal rat cerebra, were grown on surface-modified poly(lactic-co-glycolic acid, 65:35) (PLGA) films coated with poly-D-lysine (PDL) with either laminin (LN), fibronectin (FN) or collagen (CN). Immunocytochemistry showed that the isolated cells were highly immunopositive for both neurofilament and MAP-2 with well-organized neurites and somatodendritic localization. The presence of PDL with LN or FN on the PLGA films was essential for increased neural cell growth. Also, PLGA films coated with either PDL/LN or PDL/FN mixtures had higher neurite outgrowth and regular differentiation.Revisions requested 30 September 2004; Revisions received 10 November 2004     

Production of poly(3-hydroxybutyrate) by solid-state fermentation with <Emphasis Type="Italic">Ralstonia eutropha</Emphasis>

The use of solid-state fermentation is examined as a low-cost technology for the production of poly(hydroxyalkanoates) (PHAs) by Ralstonia eutropha. Two agroindustrial residues (babassu and soy cake) were evaluated as culture media. The maximum poly(hydroxybutyrate) (PHB) yield was 1.2 mg g^–1 medium on soy cake in 36 h, and 0.7 mg g^–1 medium on babassu cake in 84 h. Addition of 2.5% (w/w) sugar cane molasses to soy cake increased PHB production to 4.9 mg g^–1 medium in 60 h. Under these conditions, the PHB content of the dry biomass was 39% (w/w). The present results indicate that solid-state fermentation could be a promising alternative for producing biodegradable polymers at low cost.Revisions requested 31 August 2004; Revisions received 12 October 2004     

Biosynthesis of Poly(3-hydroxybutyrate-<Emphasis Type="Italic">co</Emphasis>-3-hydroxyvalerate-<Emphasis Type="Italic">co</Emphasis>-4-hydroxybutyrate) terpolymer by <Emphasis Type="Italic">Cupriavidus</Emphasis> sp. USMAA2-4 through two-step cultivation process

A locally isolated Gram-negative bacterium, Cupriavidus sp. USMAA2-4 was found capable of producing terpolymer poly(3-hydroxybutyrate-co-3-hydroxyvalerate-co-4-hydroxybutyrate) [P(3HB-co-3HV-co-4HB)] using γ-butyrolactone or 1,4-butanediol with either valeric acid or 1-pentanol as the carbon source. The present of 3HB, 3HV and 4HB monomers were confirmed by gas chromatography (GC) and nuclear magnetic resonance (NMR) analysis. PHA concentration of 1.9 g/l was the highest value obtained using the combination of 1,4-butanediol and 1-pentanol through one-step cultivation process. PHA concentration obtained through two-step cultivation process was higher for all the combinations and the highest value achieved was 2.5 g/l using γ-butyrolactone and 1-pentanol as carbon source. Various molar fractions of 4HB and 3HV ranging from 6 to 14 mol% and 39 to 87 mol%, respectively were produced through two-step cultivation process by manipulating the concentration of γ-butyrolactone. As the culture aeration was reduced, the molar fraction of 3HV and 4HB increased from 40 to 67 mol% and 10 to 24 mol%, respectively while the dry cell weight and PHA content decreased. The terpolymer produced was characterized using gel permeation chromatography (GPC) and differential scanning calorimetry (DSC). The number-average molecular weight (M _n) and the melting temperature (T _m)) of the terpolymer were in the range of 177–484 kDa and 160–164°C, respectively.     

Purification and Characterization of Fungal Poly(3-hydroxybutyrate) Depolymerase from Paecilomyces lilacinus F4-5 and Enzymatic Degradation of Poly(3-hydroxybutyrate-co-3-hydroxyvalerate) Film

Summary Poly(3-hydroxybutyrate) [P(3HB)] depolymerase was purified from a poly(3-hydroxybutyrate-co-3-hydroxyvalerate) [P(3HB-co-3HV)]-degrading fungus, Paecilomyces lilacinus F4-5 by hydrophobic and ion exchange column chromatography, and showed a molecular mass of 45 kDa. The optimum temperature and pH of the P(3HB) depolymerase were 50 °C and 7.0, respectively. The enzyme was stable for at least 30 min at temperatures below 40 °C, while the activity abruptly decreased over 55 °C. Enzymatic P(3HB-co-3HV) degradation showed a similar degradation pattern to that of film overlaid by fungal hyphae. It reflects that the fungal degradation of P(3HB-co-3HV) in soil is mainly caused by extracellular depolymerases.     

<Emphasis Type="Italic">Cupriavidus malaysiensis</Emphasis> sp. nov., a novel poly(3-hydroxybutyrate-<Emphasis Type="Italic">co</Emphasis>-4-hydroxybutyrate) accumulating bacterium isolated from the Malaysian environment

Bacterial classification on the basis of a polyphasic approach was conducted on three poly(3 hydroxybutyrate-co-4-hydroxybutyrate) [P(3HB-co-4HB)] accumulating bacterial strains that were isolated from samples collected from Malaysian environments; Kulim Lake, Sg. Pinang river and Sg. Manik paddy field. The Gram-negative, rod-shaped, motile, non-sporulating and non-fermenting bacteria were shown to belong to the genus Cupriavidus of the Betaproteobacteria on the basis of their 16S rRNA gene sequence analyses. The sequence similarity value with their near phylogenetic neighbour, Cupriavidus pauculus LMG3413^T, was 98.5%. However, the DNA–DNA hybridization values (8–58%) and ribotyping analysis both enabled these strains to be differentiated from related Cupriavidus species with validly published names. The RiboPrint patterns of the three strains also revealed that the strains were genetically related even though they displayed a clonal diversity. The major cellular fatty acids detected in these strains included C15:0 ISO 2OH/C16:1 ω7c, hexadecanoic (16:0) and cis-11-octadecenoic (C18:1 ω7c). Their G+C contents ranged from 68.0  to 68.6 mol%, and their major isoprenoid quinone was Ubiquinone Q-8. Of these three strains, only strain USMAHM13 (= DSM 25816 = KCTC 32390) was discovered to exhibit yellow pigmentation that is characteristic of the carotenoid family. Their assembled genomes also showed that the three strains were not identical in terms of their genome sizes that were 7.82, 7.95 and 8.70 Mb for strains USMAHM13, USMAA1020 and USMAA2-4, respectively, which are slightly larger than that of Cupriavidus necator H16 (7.42 Mb). The average nucleotide identity (ANI) results indicated that the strains were genetically related and the genome pairs belong to the same species. On the basis of the results obtained in this study, the three strains are considered to represent a novel species for which the name Cupriavidus malaysiensis sp. nov. is proposed. The type strain of the species is USMAA1020^T (= DSM 19416^T = KCTC 32390^T).     

Production of poly(3-hydroxybutyrate) and poly(3-hydroxybutyrate-co-3-hydroxyvalerate) by <Emphasis Type="Italic">Rhodopseudomonas palustris</Emphasis> SP5212

Summary Production of poly(3-hydroxybutyric acid) [P(3HB)] by Rhodopseudomonas palustris SP5212 isolated in this laboratory has been optimized under phototrophic microaerophilic conditions. Cells grown in malate medium accumulated 7.7% (w/w) P(3HB) of cellular dry weight at the early stationary phase of growth. The accumulated P(3HB) however, attained 15% (w/w) of cellular dry weight when acetate (1.0%, w/v) was used as the sole carbon source under nitrogen-limiting conditions. Synthesis and accumulation of polymer was favoured by sulphate-free conditions and at a phosphate concentration sub-optimal for growth. The polymer content of cells was increased drastically (34% of cellular dry weight) when the acetate containing medium was supplemented with n-alkanoic acids. Compositional analysis by H¹ NMR revealed that these accumulated polymers were composed of 3-hydroxybutyric acid and 3-hydroxyvaleric acid (3HV). The contents of 3HV in these copolymers ranged from 14 to 38 mol%.     

Production of poly(3-hydroxybutyrate-<Emphasis Type="Italic">co</Emphasis>-3-hydroxyhexanoate) with flexible 3-hydroxyhexanoate content in<Emphasis Type="Italic"> Aeromonas hydrophila</Emphasis> CGMCC 0911

Aeromonas hydrophila CGMCC 0911 isolated from lake water was found to be able to synthesize a polyhydroxyalkanoate (PHA) copolymer (PHBHHx) consisting of 3-hydroxybutyrate (HB) and 4–6 mol% 3-hydroxyhexanoate (HHx). The wild-type bacterium accumulated 49% PHBHHx containing 6 mol% HHx in terms of cell dry weight (CDW) when grown on lauric acid for 48 h. When A. hydrophila CGMCC 0911 expressed the Acyl-CoA dehydrogenase gene (yafH) of Escherichia coli, the recombinant strain could accumulate 47% PHBHHx, while the HHx content reached 17.4 mol%. The presence of changing glucose concentration in the culture changed the HHx content both in wild type and recombinant A. hydrophila CGMCC 0911. When 5 g l^–1 glucose was added to a culture containing 5 g l^–1 lauric acid as co-substrate, 45% PHBHHx/CDW consisting of 8.8 mol% HHx was produced by wild-type A. hydrophila CGMCC 0911 compared with only 5% in the absence of glucose. When the recombinant A. hydrophila CGMCC 0911 was grown on a mixed substrate containing lauric acid and 8–10 g l^–1 glucose, the HHx content could be further increased to 35.6 mol%. When the glucose concentration exceeded 10 g l^–1, cell growth, PHA content and mole percentages of HHx in PHBHHx were significantly reduced.     

Asymmetric reduction of ethyl 4-chloro-3-oxobutanoate to ethyl (<Emphasis Type="Italic">R</Emphasis>)-4-chloro-3-hydroxybutanoate with two co-existing,recombinant<Emphasis Type="Italic"> Escherichia coli</Emphasis> strains

Two recombinant strains, E. coli M15 (pQE30-alr0307) and E. coli M15 (pQE30-gdh0310), which were constructed to express, respectively, an NADPH-dependent aldehyde reductase gene and a glucose dehydrogenase gene, were mixed in an appropriate ratio and used for the asymmetric reduction of ethyl 4-chloro-3-oxobutanoate to ethyl (R)-4-chloro-3-hydroxybutanoate. The former strain acted as catalyst and the latter functioned in NADPH regeneration. The biotransformation was completed effectively without any addition of glucose dehydrogenase or NADP⁺/NADPH. An optical purity of 99% (ee) was obtained and the product yield reached 90.5% from 28.5 mM substrate. Revisions requested 27 July 2004/23 September 2004; Revisions received 21 September 2004/29 November 2004     

Construction of genetically modified tobacco (<Emphasis Type="Italic">Nicotiana tabacum</Emphasis> cv. Petit Havana) harboring <Emphasis Type="Italic">ompH(A:3)</Emphasis> from <Emphasis Type="Italic">Pasteurella multocida</Emphasis> (A:3)

Fowl cholera, caused by Pasteurella multocida (A:3), is a fearsome disease leading to a nonproductive influence upon poultry industry. It has been known that outer membrane protein H (OmpH) in the bacterium is a strong candidate to bring on the notorious ailment. Genetically modified (GM) tobacco (Nicotiana tabacum cv. Petit Havana) harboring ompH(A:3) was constructed to develop a plant expression system for the protein, OmpH(A:3). Some 987 bp-long (ORF with the stop codon, TAA) of the ompH(A:3) excluding the nucleotide for signal peptide, was amplified by RT-PCR with the gene specific primers and pGEM-T-ompH(A:3) as template DNA. The PCR-amplified DNA was ligated into BamHI/Sacl-cut pBI121 to obtain a recombinant plasmid, pBI121-ompH(A:3). It was then transformed into Agrobacterium tumefaciens (LBA 4404) by liquid nitrogen method to generate a recombinant clone of Agrobacterium LBA4404/pBI121-ompH(A:3). The Agrobacterium LBA4404/pBI121-ompH(A:3) was inoculated into leaf discs of tobacco (2 day old). The gene-transfected leaves were cultured on Murashige-Skoog basal medium containing kanamycin (50 mg/mL) to generate numerous calli, from which some GM tobacco plants were obtained. Transgenicity of the tobacco plant was confirmed by PCR screening along with the DNA sequencing. Also, its expression in the GM-tobacco was examined qualitatively as well as quantitatively by ELISA/Western blot. These results suggest that the genetically modified tobacco plant can be potentially used as a model system to develop plant-based vaccine against the fowl cholera.     

Facile synthesis of optically pure (<Emphasis Type="Italic">S</Emphasis>)-3-<Emphasis Type="Italic">p</Emphasis>-hydroxyphenyllactic acid derivatives

Summary. Optically pure (S)-3-p-hydroxyphenyllactic acid derivatives are important intermediates of peroxisome proliferator-activated receptor α/γ dual agonists and heteropeptides. Many efforts have been made for synthesis of those intermediates, but there exist some flaws yet. We observed that dielectric constants of organic solvents drastically affected diazotization of O-benzyl-L-tyrosine. Optically pure (S)-3-p-benzyloxyphenyllactic acid was obtained by simple recrystallization when DMF or DMSO of higher dielectric constant was used as a co-solvent in diazotization of O-benzyl-L-tyrosine. It was easily turned into various optically pure (S)-3-p-hydroxyphenyllactic acid derivatives.     

<Emphasis Type="Italic">AOM3</Emphasis> and<Emphasis Type="Italic"> AOM4</Emphasis>: two MADS box genes expressed in reproductive structures of<Emphasis Type="Italic"> Asparagus officinalis</Emphasis>

The MADS box genes participate in different steps of vegetative and reproductive plant development, including the most important phases of the reproductive process. Here we describe the isolation and characterisation of two Asparagus officinalis MADS box genes, AOM3 and AOM4. The deduced AOM3 protein shows the highest degree of similarity with ZAG3 and ZAG5 of maize, OsMADS6 of rice and AGL6 of Arabidopsis thaliana. The deduced AOM4 protein shows the highest degree of similarity with AOM1 of asparagus, the SEP proteins of Arabidopsis and the rice proteins OsMADS8, OsMADS45 and OsMADS7. The high level of identity between AOM1 and AOM4 made impossible the preparation of probes specific for one single gene, so the hybridisation signal previously described for AOM1 is probably due to the expression of both genes. The expression profile of AOM3 and AOM1/AOM4 during flower development is identical, and similar to that of the SEP genes. Asparagus genes, however, are expressed not only in flower organs, but also in the different meristem present on the apical region of the shoot during the flowering season: the apical meristem and the three lateral meristems emerging from the leaf axillary region that will give rise to flowers and lateral inflorescences during flowering season, and to phylloclades and branches during the subsequent vegetative phase. The expression of AOM3 and AOM1/AOM4 in these meristems appears to be correlated with the reproductive function of the apex as the hybridisation signal disappears when the apex switches to vegetative function.     

Exopolysaccharide production of <Emphasis Type="Italic">Lactobacillus salivarius</Emphasis> BCRC 14759 and <Emphasis Type="Italic">Bifidobacterium bifidum</Emphasis> BCRC 14615

In the present study, the production of exopolysaccharides (EPS) by 13 strains of Lactobacillus and 6 strains of Bifidobacterium in a chemical defined medium (CDM) supplemented with 30 g lactose/l was first compared. The highest EPS production of the Lactobacillus strains was found in L. salivarius BCRC 14759 while among the Bifidobacterium strains examined, B. bifidum BCRC 14615 showed the highest EPS production. Analyzes of the effect of lactose concentration and cultivation temperature on EPS production revealed that L. salivarius produced the highest amount of EPS (45.3 mg/l) in CDM supplemented with 5 g lactose/l at 40°C while B. bifidum produced the highest EPS (17.0 mg/l) in CDM supplemented with 40 g lactose/l at 35°C. α-Phosphoglucomutase, UDP-glucose pyrophosphorylase and UDP-galactose-4-epimerase exhibited a markedly notable activity compared with other enzymes examined in the cell extract of both test organisms. This indicates their possible involvement in the biosynthesis of EPS.     

Virus-induced gene silencing of <Emphasis Type="Italic">14-3-3</Emphasis> genes abrogates dark repression of nitrate reductase activity in <Emphasis Type="Italic">Nicotiana benthamiana</Emphasis>

In order to study the effect of repression of 14-3-3 genes on actual activity of the nitrate reductase (NR) in Nicotiana benthamiana leaves, Nb14-3-3a gene was silenced by virus-induced gene silencing (VIGS) method using potato virus X (PVX). Expression of Nb14-3-3a as well as Nb14-3-3b genes was altogether repressed in the leaves of PVX-14-3a-infected plants. Furthermore, two-dimensional gel electrophoresis and immunoblot analysis with anti-14-3-3 antiserum suggested that the expressions of Nb14-3-3a and Nb14-3-3b proteins are accordingly repressed in PVX-14-3a-infected plants. It is well known that binding of 14-3-3 proteins to phosphorylated NR leads to substantial decrease in NR activity of leaves under darkness. Therefore, we studied the changes in NR activity in response to light/dark transitions in the leaves of PVX-14-3a-infected plants. NR activation state was kept at a high level under darkness in PVX-14-3a-infected plants, but not in PVX-green fluorescent protein (GFP)-infected and control plants. This result suggests that Nb14-3-3a and/or Nb14-3-3b proteins are indeed involved in the inactivation of NR activity under darkness in N. benthamiana.     

Floral development and systematic position of <Emphasis Type="Italic">Arillastrum</Emphasis>, <Emphasis Type="Italic">Allosyncarpia</Emphasis>, <Emphasis Type="Italic">Stockwellia</Emphasis> and <Emphasis Type="Italic">Eucalyptopsis</Emphasis> (Myrtaceae)

We have investigated the floral ontogeny of Arillastrum, Allosyncarpia, Stockwellia and Eucalyptopsis (of the eucalypt group, Myrtaceae) using scanning electron microscopy and light microscopy. Several critical characters for establishing relationships between these genera and to the eucalypts have been determined. The absence of compound petaline primordia in Arillastrum, Allosyncarpia, Stockwellia and Eucalyptopsis excludes these taxa from the eucalypt clade. Post-anthesis circumscissile abscission of the hypanthium above the ovary in Stockwellia, Eucalyptopsis and Allosyncarpia is evidence that these three taxa form a monophyletic group; undifferentiated perianth parts and elongated fusiform buds are characters that unite Stockwellia and Eucalyptopsis as sister taxa. No floral characters clearly associate Arillastrum with either the eucalypt clade or the clade of Stockwellia, Eucalyptopsis and Allosyncarpia.We gratefully acknowledge Clyde Dunlop and Bob Harwood (Northern Territory Herbarium) for collecting specimens of Allosyncarpia, and Bruce Gray (Atherton) for collecting specimens of Stockwellia. The Australian National Herbarium (CANB) kindly lent herbarium specimens of Eucalyptopsis for examination. This research was supported by a University of Melbourne Research Development Grant to Andrew Drinnan.