Amino acid analysis of peptide loading ratios in conjugate vaccines: a comparison of direct electrochemical detection and 6-aminoquinolyl-N-hydroxysuccinimidyl carbamate pre-column derivatization methods

Amino acid analysis using direct electrochemical detection was compared with precolumn fluorescent derivatization using 6-aminoquinolyl- N-hydroxysuccinimidyl carbamate (AQC) for evaluation of the degree of covalent coupling of peptides to a carrier-protein complex derived from the bacteria Neisseria meningitidis. AQC derivatization was found to give superior sensitivity compared to electrochemical detection, with less interference from sample components such as carbohydrates or buffer salts. Hydrolysis time and temperature were optimized for maximal recoveries of the marker amino acid 6-aminohexanoic acid (epsilon-Ahx) and the unique amino acids S-dicarboxyethyl cysteine (SDCEC) and S-carboxymethyl homocysteine (SCHMC), which are generated upon the hydrolysis of the covalent linkage between the peptide and the carrier protein. Quantitation of these amino acids enabled the determination of the ratio of peptide to protein in the conjugate samples.     

A comparison of fluorescamine and naphthalene-2,3-dicarboxaldehyde fluorogenic reagents for microplate-based detection of amino acids.

The use of appropriate fluorometric derivatization procedures is of considerable importance for accurate determination of amino acids in biological samples and in metal-assisted peptide hydrolysis reactions. It is especially critical for the relative fluorescence intensities (RFI) of equal amounts of amino acids to be as similar as possible. While fluorescamine and naphthalene-2,3-dicarboxaldehyde (NDA) have proven to be excellent fluorogenic reagents for amino acid detection, the effects of various factors such as organic solvent, buffer, and pH have never been rigorously evaluated with respect to normalizing the relative fluorescence intensities of individual amino acids. To this end, here we describe optimized fluorescamine and NDA derivatization reactions that enhance the accuracy of microplate-based detection of amino acids. For both fluorescamine and NDA, we have shown that the RFI values of 16 of 19 amino acids are greater than 70%. Although determination of tryptophan is problematic, this difficulty is overcome by the addition of beta-cyclodextrin to the NDA reaction. In principle, the optimized fluorescamine and NDA microplate procedures reported here can be utilized as complementary techniques for the detection of 19 of 20 naturally occurring amino acids.     

A method for the separation of peptides and α-amino acids

1. Peptides and alpha-amino acids, occurring in mixtures from various sources, can be separated into one fraction containing the amino acids and several peptide fractions. This is achieved by chelation of the mixture with Cu(2+) ions and subsequent chromatography of these chelates over the acetate form of diethylaminoethylcellulose or triethylaminoethylcellulose. 2. The amino acid fraction is obtained by elution with 0.01m-collidine-acetate buffer, pH8.0. 3. Peptide fractions are eluted with 0.01m-collidine-acetate buffer, pH4.5, 0.17n-acetic acid and 0.1n-hydrochloric acid respectively. 4. With the exception of aspartic acid and glutamic acid, which are partly found in the acidic peptide fraction, the amino acids are completely separated from the peptides. 5. Contamination of the acidic peptide fraction with glutamic acid and aspartic acid can be largely avoided by previous addition of an excess of arginine. 6. Copper is removed from the eluates by extraction with 8-hydroxyquinoline in chloroform.     

Analysis of phenylthiohydantoin amino acid mixtures for sequencing by thermospray liquid chromatography/mass spectrometry

Phenylthiohydantoin (PTH) amino acids, the derivatives of amino acids liberated in the course of automated N-terminal sequence analysis of peptides and proteins, are most commonly identified by high-performance liquid chromatography. This communication describes an extension to the methodology for PTH amino acid identification which exploits thermospray liquid chromatography/mass spectrometry for use in the confirmation of PTH amino acid identifications previously made solely on the basis of retention times. Thermospray mass spectra of the 19 synthetic PTH amino acids corresponding to the residues commonly observed during N-terminal sequencing have been acquired. These spectra show strong signals for the protonated molecular ion, accompanied in several cases by ions produced by limited fragmentation of the amino acid side chain and/or the PTH ring system. A reverse-phase separation protocol has been adapted for use with thermospray. The method permits recognition of the protonated molecular ions of all the standard PTH amino acids at the 150-pmol level on the basis of signal-to-noise ratios of 10:1 or better with full scanning. The method has been tested on the N-terminal amino acid sequence analysis of 200 pmol of the standard protein beta-lactoglobulin A, and has been found useful in the study of selected side-products of the sequencing chemistry.     

Reverse-phase separation and electrochemical detection of neuropeptides

The reverse-phase separation of neuropeptides using isocratic conditions is described. Each component of the mobile phase was examined for its ability to influence the separation of complex mixtures of neuropeptides. Manipulation of buffer strength, pH, organic modifier and column type provided sufficient flexibility to resolve closely related neuropeptides. Amperometric detection of oxidizable amino acids in the peptide sequence of a number of endogenous neuropeptides proved suitable for the identification of peptide standards and quantification of neural lobe arginine vasopressin and striatal methionine enkephalin.     

Qualitative determination of N-terminal amino acids of peptides and proteins with cobalt(III) chelates

1. A method of N-terminal peptide-bond hydrolysis with the cis-beta-hydroxyaquo(triethylenetetramine)cobalt(III) ion, i.e. beta-[Co(trien)(OH)(OH(2))](2+), is reported. The method has been demonstrated with 22 small peptides and ten proteins. 2. The procedure is rapid (an N-terminal amino acid determination can be made easily in one day), it involves no acid hydrolysis step and thus no destruction of labile amino acids, and it involves the use of easily prepared inexpensive reagents. 3. The released N-terminal amino acids can be identified as their cobalt(III) derivatives, or directly as the amino acid or as their dansylated derivatives. 4. The method is to treat 1 mumol of peptide or protein with beta-[Co(trien)(OH)(OH(2))](2+) reagent at pH8.0, 45 degrees C for 3h. Addition of 0.5m-phosphate buffer, pH10.5 at 45 degrees C for 10min cleaves the N-terminal bidentate amino acid-cobalt complex, which can be identified directly. For greater sensitivity with 10nmol of peptide) the free amino acid is prepared from the complex by treatment (with NaCN (0.1m, 40 degrees C, 30min), or H(2)S or NaBH(4) (25 degrees C, 5min), dried, dansylated and the dansyl-amino acid identified by high-voltage electrophoresis. The method is unaffected by the presence of 4-8m-urea, but will not cleave blocked N-terminal acids.     

Quantification of glutamine in proteins and peptides using enzymatic hydrolysis and reverse-phase high-performance liquid chromatography

An enzymatic method for hydrolyzing bovine milk proteins was developed. Purified milk proteins (alpha-lactalbumin, beta-lactoglobulin, and beta-casein) were hydrolyzed in 0.1 M Hepes buffer (pH 7.5) containing pronase E, aminopeptidase M, and prolidase at 37 degrees C for 20 h. Free glutamine and other amino acids were derivatized with phenylisothiocyanate and separated using a C18 Pico-Tag column. Amino acids were eluted from the column with an aqueous sodium acetate-acetonitrile gradient with detection at 254 nm. Glutamine recoveries from hydrolyzed alpha-lactalbumin, beta-lactoglobulin, and beta-casein were 78 +/- 4, 98 +/- 3, and 101 +/- 3% of the theoretical values, respectively. The recoveries of most amino acids were comparable with those obtained using acid hydrolysis, except for the recoveries of proline and acidic amino acids. These peptide bonds appeared to be resistant to enzymatic hydrolysis and also to inhibit the hydrolysis of adjacent amino acids. Free glutamine was found to be very stable (97% recovery) under the enzymatic hydrolysis conditions.     

4-NN-dimethylaminoazobenzene 4''-isothiocyanate, a new chromophoric reagent for protein sequence analysis.

4-NN-Dimethylaminoazobenzene 4'-isothiocyanate was synthesized for the purpose of improving the ease and sensitivity of peptide sequence analysis. The method of 4-NN-dimethylaminoazobenzene 4'-isothiocyanate synthesis, the preparation of 24 4-NN-dimethylaminoazobenzene-4'-thiohydantoins of amino acids and their t.l.c. separation are described. All the thiohydantoins, except those of leucine and isoleucine, could be satisfactorily separated by chromatography on a two-dimensional polyamide sheet. The sensitive azo group permits the detection of 4-NN-dimethylaminoazobenzene-4'-thiohydantoins of amino acids as red spots down to pmol amounts directly on the sheet. A simple sensitive method for sequencing dipeptides and the first two or three N-terminal amino acids of proteins is also reported. The colour change of the spots from purple to blue to red after being exposed to HCl vapour, corresponding to the chemical change from 4-NN-dimethylaminoazobenzene-4' isothiocyanate to the 4-NN-dimethylaminoazobenzene-4'-thiocarbamoyl amino acid derivative to the 4-NN-dimethylaminoazobenzene-4'-thiohydantoin amino acid derivative, reveals a very interesting and valuable feature of this reagent.     

Fluorescein-based amino acids for solid phase synthesis of fluorogenic protease substrates

An efficient synthesis of new type fluorescent amino acids is described. The Fmoc-protected dyes can be prepared in a four-step procedure with approximately 30% overall yield from aminofluoresceins and other inexpensive commercially available precursors. The dyes are much more photostable compared to fluorescein and exhibit constant pH-independent fluorescence that is advantageous in biological applications. The Fmoc-protected fluorescent amino acids are ready for use in solid phase peptide synthesis. As a proof of concept, a fluorogenic papain substrate was synthesized and employed for on-bead detection of the protease activity. By using a novel technique for quantitative analysis of bead fluorescence, a approximately 2.7-fold increase in mean bead brightness was measured and was attributed to substrate cleavage by papain. The new type fluorescent amino acids seem to be a promising tool for the synthesis of fluorescent peptide ligands and fluorogenic protease substrates.     

Preparation of Peptides Containing Any Desired Amino Acid: Methionyl Peptides of Bovine Rhodopsin

A general method is described which allows the identification and preparation of peptides containing any amino acid of interest. The method has been applied to isolation of the methionyl peptides from a peptic digest of oxidized bovine rhodopsin. The peptide digestion mixture is first partially separated by ion exchange column chromatography. Location of peptides containing the desired amino acid is performed by amino acid analysis of acid hydrolyzed column fractions by high voltage paper electrophoresis. Peptides are further purified and prepared by peptide mapping, elution, and amino acid analysis using inexpensive high capacity techniques. Peptide sequencing is performed by a manual dansyl-Edman method well adapted for rapidly processing large numbers of samples. The methods are particularly well suited for detection and preparation of peptides containing amino acids for which there is no specific detection method.     

Optimization of immobilized enzyme hydrolysis combined with high-performance liquid chromatography/thermospray mass spectrometry for the determination of neuropeptides

Peptidases, including chymotrypsin, thermolysin, trypsin, V8 protease, and carboxypeptidases A, B, and Y, were immobilized for use in conjunction with HPLC/thermospray MS for the analysis of neuropeptides. The optimal operating conditions for each immobilized enzyme bioreactor were determined. Optimal hydrolysis usually occurred at the highest percentage of aqueous solution in the mobile phase at pH 7-8 and 40-50 degrees C. Often post-HPLC column addition of aqueous solutions before the bioreactor could improve activity and thermospray sensitivity without changing the HPLC separation. Enzymatic hydrolysis requirements were compatible under conditions for HPLC separation and thermospray MS detection of the selected neuropeptides. Synthetic alpha-, beta-, and gamma-endorphins were the primary neuropeptides used to evaluate on-line immobilized enzyme bioreactor/MS. HPLC followed by peptidase hydrolysis produced characteristic hydrolysis products for confirming the peptides' identity using thermospray MS detection. Furthermore, the peptide formed from enzymatic hydrolysis resulted in a MS ion current 10-40 times higher than that of the [M + 2H]2+ ion for unhydrolyzed beta-endorphin. The increased sensitivity achieved for detecting the hydrolysis products permits detection and quantitation of synthetic peptides down to 800 fmol.     

Role of recurrent hydrophobic residues in catalysis of helix formation by T cell-presented peptides in the presence of lipid vesicles

We tested the hypothesis that the recurrence of hydrophobic amino acids in a polypeptide at positions falling in an axial, hydrophobic strip if the sequence were coiled as an alpha helix, can lead to helical nucleation on a hydrophobic surface. The hydrophobic surface could anchor such residues, whereas the peptide sequence grows in a helical configuration that is stabilized by hydrogen bonds among carbonyl and amido NH groups along the peptidyl backbone of the helix, and by other intercycle interactions among amino acid side chains. Such bound, helical structures might protect peptides from proteases and/or facilitate transport to a MHC-containing compartment and thus be reflected in the selection of T cell-presented segments. Helical structure in a series of HPLC-purified peptides was estimated from circular dichroism measurements in: 1) 0.01 M phosphate buffer, pH 7.0, 2) that buffer with 45% trifluoroethanol (TFE), and 3) that buffer with di-O-hexadecyl phosphatidylcholine vesicles. By decreasing the dielectric constant of the buffer, TFE enhances intrapeptide interactions generally, whereas the lipid vesicles only provide a surface for hydrophobic interactions. The peptides varied in their strip-of-helix hydrophobicity indices (SOHHI; the mean Kyte-Doolittle hydrophobicities of residues in an axial strip of an alpha helix) and in proline content. Structural order for peptides with helical circular dichroism spectra was estimated as percentage helicity from circular dichroism theta 222 nm values and peptide concentration. A prototypic alpha helical peptide with three cycles plus two amino acids and an axial hydrophobic strip of four leucyl residues (SOHHI = 3.8) was disordered in phosphate buffer, 58% helical in that buffer with 48% TFE, and 36% helical in that buffer with vesicles. Percentage helicity in the presence of vesicles of the subset of peptides without proline followed their SOHHI values. Peptides with multiple prolyl residues had circular dichroism spectra with strong signals, but since they did not have altered spectra in the presence of vesicles relative to phosphate buffer alone, the hydrophobic surface of the vesicle did not appear to stabilize those structures.     

Oligopeptide-mediated helix stabilization of model peptides in aqueous solution.

Oligopeptide-mediated helix stabilization of peptides in hydrophobic solutions was previously found by NMR and CD spectroscopic studies. The oligopeptide included the hydrophobic amino acids found in its parent peptide and were interposed by relevant basic oracidic amino acids. The strength of the interactions depended on the amino acid sequences. However, no helix-stabilizing effect was seen for the peptides in phosphate buffer solution, because the peptides assumed a random-coil structure. In order to ascertain whether the helix-stabilizing effect of an oligopeptide on its parent peptide could operate in aqueous solution, model peptides EK17 (Ac-AEAAAAEAAAKAAAAKA-NH2) and IFM17 (Ac-AEAAAAEIFMKAAAAKA-NH2) that may assume an alpha-helix in aqueous solutions were synthesized. Interactions were examined between various oligopeptides (EAAAK, KAAAE, EIFMK, KIFME, KIFMK and EYYEE) and EK17 or IFM17 in phosphate buffer and in 80% trifluoroethanol (TFE)-20% H2O solutions by CD spectra. EAAAK had little effect on the secondary structures of EK17 in both buffer and TFE solutions, while KAAAE, which has the reverse amino acid sequence of EAAAK, had a marked helix-destabilizing effect on EK17 in TFE. EIFMK and KIFME were found to stabilize the alpha-helical structure of EK17 in phosphate buffer solutions, whereas KIFMK and EYYEE destabilized the alpha-helical structure of EK17. EIFMK and KIFME had no effect on IFM17, because unexpectedly, IFM17 had appreciable amounts of beta-sheet structure in buffer solution. It was concluded that in order for the helix-stabilizing (1) the model peptide, the alpha-helical conformation of which is to be stabilized, should essentially assume an alpha-helical structure by nature, and (2) the hydrophobicity of the side-chains of the oligopeptide should be high enough for the oligopeptide to perform stable specific side chain-side chain intermolecular hydrophobic interactions with the model peptide.     

Fluorescence detection of amino acids in the postcleavage conversions for manual sequencing of a peptide

A modified Edman degradation method where fluorescent derivatives of amino acids were generated from the postcleavage products of a peptide is described. In the method, the target peptide was applied onto double glass fiber membranes in a small filter disk (4 mm i.d.) and then treated with small amounts of reagents for the manual sequencing of the peptide. The anilinothiazolinone (ATZ) of N-terminus amino acid residue after the isolation from the solid-phase membranes was reacted with a primary amine, 4-(1′-cyanoisoindolyl)aniline (CIA), to form a more stable and sensitive fluorescent derivative, phenylthiocarbamoyl-CIA. An average yield of 85% was obtained in neutral pH conditions for the CIA reaction. The ATZ-CIA-amino acids were separated by reversed-phase liquid chromatography and detected by fluorometry. The lower limits of the detection for amino acids after the Edman degradation were 0.16 to 0.52 pmol (signal/noise ratio = 3) on the column. The sensitivity was approximately 10 times higher than ultraviolet absorbance detection of phenylthiohydantoin products in the conventional Edman degradation. The suitability of the method was demonstrated by the sensitive manual sequencing of insulin chain B composed of 30 amino acids.     

Identification of the C-terminally alpha-amidated amino acid in peptides by high-performance liquid chromatography

A sensitive method for the rapid identification of the C-terminally amidated amino acid in peptides is described. Peptides containing the alpha-amide group at the C-terminus were cleaved with endopeptidases. The fragments released (oligopeptides, amino acids and the C-terminally amidated residue) are coupled to phenylisothiocyanate. The phenylthiocarbamoyl derivative of the amino acid alpha-amide is selectively extracted from the mixture by alkaline butyl acetate and identified by a high-performance liquid chromatography system that enables rapid and complete separation of the derivatives of 17 amino acid amides at a detection limit of 20-50 pmol. The C-terminal alpha-amides of neurokinin-A (Met-NH2), mammalian secretin (Val-NH2), pancreatic polypeptide (Tyr-NH2) and peptide HI (Ile-NH2) are unequivocally determined at a level of 0.5-2 nmol per peptide. This method was used to characterize a crude peptide fraction prepared from porcine brain. Cholecystokinin-58 was identified in this fraction by detection of phenylthiocarbamoyl-phenylalaninamide. The method is suitable for the identification of the C-terminal alpha-amidated residue of purified peptides, but can also be used as a screening strategy to isolate from complex biological extracts novel peptides containing an alpha-amidated amino acid at the C-terminus.     

Determination of amino acids in saliva using capillary electrophoresis with fluorimetric detection

In the present study a sensitive method for the quantification of main free amino acids in saliva using capillary electrophoresis with laser induced fluorescence detection was developed. As background electrolyte 20 mM borate buffer pH 9.5 was used. Amino acids were separated after derivatization were optimized. The main amino acids occurring in saliva (Pro, Ser, Gly and Glu) were separated in less than 7 min. The parameters of validation such as linearity of response, precision and detection limits were determined. The detection limits were obtained in the range from 0.1 to 2.4 nM. The developed method was employed for determination of amino acids in real saliva samples.     

Tools for investigating peptide-protein interactions: peptide incorporation of environment-sensitive fluorophores via on-resin derivatization

This protocol presents the peptide incorporation of environment-sensitive fluorophores derived from the dimethylaminophthalimide family. The procedure utilizes anhydride precursors of 4-dimethylaminophthalimide (4-DMAP) or 6-dimethylaminonaphthalimide (6-DMN), whose syntheses are described in a related protocol from these authors. In this protocol, the fluorophores are directly incorporated after solid-phase peptide synthesis (SPPS) via on-resin derivatization of peptides prepared using commercially available diamino acids, which are Alloc-protected on the side-chain amino group. The time required to complete the procedure depends on the size and number of peptides targeted. As an alternative to this approach, the corresponding fluorescent amino acids can be obtained in an Fmoc-protected form for convenient use as building blocks in SPPS. This option is described in a related protocol by these authors.     

Determination of amino acids in saliva using capillary electrophoresis with fluorimetric detection

In the present study a sensitive method for the quantification of main free amino acids in saliva using capillary electrophoresis with laser induced fluorescence detection was developed. As background electrolyte 20 mM borate buffer pH 9.5 was used. Amino acids were separated after derivatization with fluorescein isothiocyanate (FITC) and the conditions for derivatization were optimized. The main amino acids occurring in saliva (Pro, Ser, Gly and Glu) were separated in less than 7 min. The parameters of validation such as linearity of response, precision and detection limits were determined. The detection limits were obtained in the range from 0.1 to 2.4 nM. The developed method was employed for determination of amino acids in real saliva samples.     

Thermospray ionization liquid chromatography-mass spectrometry: a new and highly specific technique for the analysis of bile acids

A rapid, highly specific and sensitive combined high performance liquid chromatography-mass spectrometric (LC-MS) method is described for the analysis of bile acids in biological fluids. Ionization of polar bile acid conjugates is achieved in the thermospray interface that is used to directly couple the LC column to the mass spectrometer, thereby allowing continuous monitoring of the LC effluent. Maximum sensitivity (4-10 pmol) is achieved by recording the negative ions generated in the ionization process and mass spectra obtained for the principal bile acid conjugates are characterized by intense [M-H]-pseudo-molecular ions and fragment ions due to consecutive losses of water corresponding to a number of hydroxyl groups in the molecule. The mass spectrometer thus provides molecular weight and useful structural information for each compound separated by HPLC. Applications of the LC-MS technique to the analysis of bile acids in bile and serum samples after an initial solid-phase extraction step highlight the potential of the thermospray interface for enhancing the specificity and sensitivity of the HPLC technique for bile acid analysis.     

The Nano-tag, a streptavidin-binding peptide for the purification and detection of recombinant proteins

We present a new streptavidin-binding peptide for both the purification and the detection of recombinant proteins. The peptide possesses nanomolar-affinity for streptavidin and therefore was termed Nano-tag. The Nano-tag(15) is 15 amino acids long and binds to streptavidin with a dissociation constant of 4 nM and the Nano-tag(9) is a 9-mer peptide with a dissociation constant of 17 nM. We demonstrate the one-step purification of Nano-tagged proteins, namely bovine heart fatty acid-binding protein (FABP), bacterial chloramphenicol acetyltransferase (CAT), and green fluorescent protein (GFP), from an in vitro translation system as well as from an Escherichia coli lysate. No significant influence of the Nano-tag(15) and of the conditions during affinity chromatography on maturation or activity of the proteins was observed whereas the Nano-tag(9) revealed a slight decline in the amount and activity of the synthesized proteins. The main advantage of the Nano-tag is the mild and specific elution with washing buffer plus biotin or related compounds, which enables the elution of the bound fusion protein from the streptavidin column in the native state. Additionally, the Nano-tag allowed the detection of recombinant proteins on Western blots by a streptavidin-alkaline phosphatase conjugate.