Heterologous coproduction of enterocin A and pediocin PA-1 by Lactococcus lactis: detection by specific peptide-directed antibodies

Antibodies against enterocin A were obtained by immunization of rabbits with synthetic peptides PH4 and PH5 designed, respectively, on the N- and C-terminal amino acid sequences of enterocin A and conjugated to the carrier protein KLH. Anti-PH4-KLH antibodies not only recognized enterocin A but also pediocin PA-1, enterocin P, and sakacin A, three bacteriocins which share the N-terminal class IIa consensus motif (YGNGVXC) that is contained in the sequence of the peptide PH4. In contrast, anti-PH5-KLH antibodies only reacted with enterocin A because the amino acid sequences of the C-terminal parts of class IIa bacteriocins are highly variable. Enterocin A and/or pediocin PA-1 structural and immunity genes were introduced in Lactococcus lactis IL1403 to achieve (co)production of the bacteriocins. The level of production of the two bacteriocins was significantly lower than that obtained by the wild-type producers, a fact that suggests a low efficiency of transport and/or maturation of these bacteriocins by the chromosomally encoded bacteriocin translocation machinery of IL1403. Despite the low production levels, both bacteriocins could be specifically detected and quantified with the anti-PH5-KLH (anti-enterocin A) antibodies isolated in this study and the anti-PH2-KLH (anti-pediocin PA-1) antibodies previously generated (J. M. Martínez, M. I. Martínez, A. M. Suárez, C. Herranz, P. Casaus, L. M. Cintas, J. M. Rodríguez, and P. E. Hernández, Appl. Environ. Microbiol. 64:4536-4545, 1998). In this work, the availability of antibodies for the specific detection and quantification of enterocin A and pediocin PA-1 was crucial to demonstrate coproduction of both bacteriocins by L. lactis IL1403(pJM04), because indicator strains that are selectively inhibited by each bacteriocin are not available.     

The genes for secretion and maturation of lactococcins are located on the chromosome of Lactococcus lactis IL1403.

Southern hybridization and PCR analysis were used to show that Lactococcus lactis IL1403, a plasmid-free strain that does not produce bacteriocin, contains genes on its chromosome that are highly homologous to lcnC and lcnD and encode the lactococcin secretion and maturation system. The lcnC and lcnD homologs on the chromosome of IL1403 were interrupted independently by Campbell-type integrations. Both insertion mutants were unable to secrete active lactococcin. Part of the chromosomal lcnC gene was cloned and sequenced. Only a few nucleotide substitutions occurred, compared with the plasmid-encoded lcnC gene, and these did not lead to changes in the deduced amino acid sequence. No genes homologous to those for lactococcin A, B, or M could be detected in IL1403, and the strain does not produce bacteriocin activity.     

Expression of lactococcin A and pediocin PA-1 in heterologous hosts

Pediocin PA-1 production, immunity and secretion are specified by a cluster of four genes in Pediococcus acidilactici PAC1.0. The production by, secretion of, and immunity to lactococcin A of Lactococcus lactis are also determined by four genes. Here, expression of the pediocin operon in Lactococcus lactis is reported, which could only be achieved by placing it under control of a lactococcal promoter. Expression of the lactococcin A operon in Pediococcus is also described: recombinant clones of Pediococcus were obtained that produced and secreted both active pediocin PA-1 and lactococcin A.     

Nisin-controlled production of pediocin PA-1 and colicin V in nisin- and non-nisin-producing Lactococcus lactis strains

The introduction of chimeric genes encoding the fusion leader of lactococcin A-propediocin PA-1 or procolicin V under the control of the inducible nisA promoter and the lactococcin A-dedicated secretion genes (lcnCD) into Lactococcus lactis strains, including a nisin producer, expressing the two component regulator NisRK led to the production or pediocin PA-1 or colicin V, respectively.     

Development of innovative pediocin PA-1 by DNA shuffling among class IIa bacteriocins

Pediocin PA-1 is a member of the class IIa bacteriocins, which show antimicrobial effects against lactic acid bacteria. To develop an improved version of pediocin PA-1, reciprocal chimeras between pediocin PA-1 and enterocin A, another class IIa bacteriocin, were constructed. Chimera EP, which consisted of the C-terminal half of pediocin PA-1 fused to the N-terminal half of enterocin A, showed increased activity against a strain of Leuconostoc lactis isolated from a sour-spoiled dairy product. To develop an even more effective version of this chimera, a DNA-shuffling library was constructed, wherein four specific regions within the N-terminal half of pediocin PA-1 were shuffled with the corresponding sequences from 10 other class IIa bacteriocins. Activity screening indicated that 63 out of 280 shuffled mutants had antimicrobial activity. A colony overlay activity assay showed that one of the mutants (designated B1) produced a >7.8-mm growth inhibition circle on L. lactis, whereas the parent pediocin PA-1 did not produce any circle. Furthermore, the active shuffled mutants showed increased activity against various species of Lactobacillus, Pediococcus, and Carnobacterium. Sequence analysis revealed that the active mutants had novel N-terminal sequences; in active mutant B1, for example, the parental pediocin PA-1 sequence (KYYGNGVTCGKHSC) was changed to TKYYGNGVSCTKSGC. These new and improved DNA-shuffled bacteriocins could prove useful as food additives for inhibiting sour spoilage of dairy products.     

Heterologous Processing and Export of the Bacteriocins Pediocin PA-1 and Lactococcin A in Lactococcus Lactis: A Study with Leader Exchange

The bacteriocins pediocin PA-1 and lactococcin A are synthesized as precursors carrying N-terminal extensions with a conserved cleavage site preceded by two glycine residues in positions -2 and -1. Each bacteriocin is translocated through the cytoplasmic membrane by an integral membrane protein of the ABC cassette superfamily which, in the case of pediocin PA-1, has been shown to possess peptidase activity responsible for proteolytic cleavage of the pre-bacteriocin. In each case, another integral membrane protein is essential for bacteriocin production. In this study, a two-step PCR approach was used to permutate the leaders of pediocin PA-1 and lactococcin A. Wild-type and chimeric pre-bacteriocins were assayed for maturation by the processing/export machinery of pediocin PA-1 and lactococcin A. The results show that pediocin PA-1 can be efficiently exported by the lactococcin machinery whether it carries the lactococcin or the pediocin leader. It can also compete with wild-type lactococcin A for the lactococcin machinery. Pediocin PA-1 carrying the lactococcin A leader or lactococcin A carrying that of pediocin PA-1 was poorly secreted when complemented with the pediocin PA-1 machinery, showing that the pediocin machinery is more specific for its bacteriocin substrate. Wild-type pre-pediocin and chimeric pre-pediocin were shown to be processed by the lactococcin machinery at or near the double-glycine cleavage site. These results show the potential of the lactococcin LcnC/LcnD machinery as a maturation system for peptides carrying double-glycine-type amino-terminal leaders.     

Production of Pediocin PA-1 by Lactococcus lactis Using the Lactococcin A Secretory Apparatus

The class II bacteriocins pediocin PA-1, from Pediococcus acidilactici, and lactococcin A, from Lactococcus lactis subsp. lactis bv. diacetylactis WM4 have a number of features in common. They are produced as precursor peptides containing similar amino-terminal leader sequences with a conserved processing site (Gly-Gly at positions −1 and −2). Translocation of both bacteriocins occurs via a dedicated secretory system. Because of the strong antilisterial activity of pediocin PA-1, its production by lactic acid bacteria strains adapted to dairy environments would considerably extend its application in the dairy industry. In this study, the lactococcin A secretory system was adapted for the expression and secretion of pediocin PA-1. A vector containing an in-frame fusion of sequences encoding the lcnA promoter, the lactococcin A leader, and the mature pediocin PA-1, was introduced into L. lactis IL1403. This strain is resistant to pediocin PA-1 and encodes a lactococcin translocation apparatus. The resulting L. lactis strains secreted a bacteriocin with an antimicrobial activity of approximately 25% of that displayed by the parental pediocin-producing P. acidilactici 347. A noncompetitive indirect enzyme-linked immunosorbent assay with pediocin PA-1-specific antibodies and amino-terminal amino acid sequencing confirmed that pediocin PA-1 was being produced by the heterologous host.Bacteriocins of lactic acid bacteria have received considerable attention in recent years due to their potential application in the food industry as natural preservatives. Most interest has focused on lantibiotics (class I bacteriocins), e.g., nisin, and small heat-stable non-lanthionine-containing bacteriocins (class II) (22, 23). A major subgroup of class II bacteriocins (IIa) has been given the generic name of pediocin family (28) after its most extensively studied member, pediocin PA-1. Members of this class have a number of features in common, including a very strong antimicrobial activity against Listeria species (28). The food-borne pathogen Listeria monocytogenes is a major concern in the dairy industry since it can grow in a variety of dairy products at low temperature and pH (13). Although a pediocin PA-1-producing Lactobacillus plantarum strain has recently been isolated (12), this bacteriocin is generally produced by Pediococcus acidilactici strains of meat origin (3, 16, 18, 29, 31). Because of its antilisterial activity, the expression of pediocin PA-1 in strains of dairy origin would be highly desirable.Pediocin PA-1 production, immunity, and secretion are determined by an operon containing four genes (26). The structural gene, pedA, encodes the pediocin PA-1 precursor, pedB specifies immunity, and the pedC and pedD gene products are membrane-bound proteins required for secretion of the active peptide (39). Homologs of these genes have been described for related peptides. Biosynthesis of the well-characterized class II bacteriocin, lactococcin A, produced by strains of Lactococcus lactis also involves four genes (20, 36, 40). In addition to the structural gene (lcnA) and immunity gene (lciA), there are two genes (lcnC and lcnD) whose products together form a transport system dedicated to the translocation of lactococcin through the host membrane. The LcnC protein belongs to the family of ATP-binding cassette transporter proteins (40), and LcnD acts as an accessory protein (14). These two proteins have considerable homology to PedD and PedC, respectively (39), suggesting that the latter proteins play a similar role in the transport of active pediocin. The two bacteriocins also share the double glycine-processing site found in many lactic acid bacteria class II bacteriocins, some lantibiotics, and the Escherichia coli bacteriocin, colicin V (17).Van Belkum et al. (38) have recently investigated the role of leader sequences of the class II bacteriocins in the recognition of the precursor peptide by the dedicated translocation machinery of the host organism. By constructing hybrid genes, they demonstrated that the leader peptides of leucocin A, lactococcin A, and colicin V, which are cleaved at the Gly-Gly (positions −2 and −1) site, can direct the secretion of the nonrelated bacteriocin divergicin A. Our studies have focused on the class II bacteriocins pediocin PA-1 and lactococcin A. Since these peptides have a number of features in common, it might be expected that a pediocin PA-1 precursor could be secreted and processed by using the lactococcin A translocation machinery. L. lactis IL1403 is a plasmid-free strain that does not produce bacteriocin but contains chromosomal copies of genes analogous to lcnC and lcnD (33, 40). In addition, the natural resistance of this strain to pediocin PA-1 (8) makes it an ideal candidate for a production host to investigate the expression of pediocin PA-1 in lactococci.This paper describes the development of an expression system geared to the production of heterologous peptides in L. lactis. Testing the system with pediocin PA-1 involved the construction of a vector containing an in-frame fusion between sequences encoding the lactococcin A leader and the structural part of mature pediocin PA-1. The hybrid genes were introduced into L. lactis IL1403, and the ability of these strains to produce and secrete pediocin PA-1 was investigated.     

Engineering increased stability in the antimicrobial peptide pediocin PA-1

Pediocin PA-1 is a food grade antimicrobial peptide that has been used as a food preservative. Upon storage at 4 degrees C or room temperature, pediocin PA-1 looses activity, and there is a concomitant 16-Da increase in the molecular mass. It is shown that the loss of activity follows first-order kinetics and that the instability can be prevented by replacing the single methionine residue (Met31) in pediocin PA-1. Replacing Met by Ala, Ile, or Leu protected the peptide from oxidation and had only minor effects on bacteriocin activity (for most indicator strains 100% activity was maintained). Replacement of Met by Asp was highly deleterious for bacteriocin activity.     

Establishing recombinant production of pediocin PA-1 in Corynebacterium glutamicum

Bacteriocins are antimicrobial peptides produced by bacteria to inhibit competitors in their natural environments. Some of these peptides have emerged as commercial food preservatives and, due to the rapid increase in antibiotic resistant bacteria, are also discussed as interesting alternatives to antibiotics for therapeutic purposes. Currently, commercial bacteriocins are produced exclusively with natural producer organisms on complex substrates and are sold as semi-purified preparations or crude fermentates. To allow clinical application, efficacy of production and purity of the product need to be improved. This can be achieved by shifting production to recombinant microorganisms.Here, we identify Corynebacterium glutamicum as a suitable production host for the bacteriocin pediocin PA-1. C. glutamicum CR099 shows resistance to high concentrations of pediocin PA-1 and the bacteriocin was not inactivated when spiked into growing cultures of this bacterium. Recombinant C. glutamicum expressing a synthetic pedACD^Cgl operon releases a compound that has potent antimicrobial activity against Listeria monocytogenes and Listeria innocua and matches size and mass:charge ratio of commercial pediocin PA-1. Fermentations in shake flasks and bioreactors suggest that low levels of dissolved oxygen are favorable for production of pediocin. Under these conditions, however, reduced activity of the TCA cycle resulted in decreased availability of the important pediocin precursor l-asparagine suggesting options for further improvement. Overall, we demonstrate that C. glutamicum is a suitable host for recombinant production of bacteriocins of the pediocin family.     

Molecular analyses of the lactococcin A gene cluster from Lactococcus lactis subsp. lactis biovar diacetylactis WM4.

The genes responsible for bacteriocin production and immunity in Lactococcus lactis subsp. lactis biovar diacetylactis WM4 were localized and characterized by DNA restriction fragment deletion, subcloning, and nucleotide sequence analysis. The nucleotide sequence of a 5.6-kb AvaII restriction fragment revealed a cluster with five complete open reading frames (ORFs) in the same orientation. DNA and protein homology analyses, combined with deletion and Tn5 insertion mutagenesis, implicated four of the ORFs in the production of and immunity to lactococcin A. The last two ORFs in the cluster were the lactococcin A structural and immunity genes, lcnA and lciA. The two ORFs immediately upstream of lcnA and lciA were designated lcnC and lcnD, and the proteins that they encoded showed similarities to proteins of signal sequence-independent secretion systems. lcnC encodes a protein of 716 amino acids that could belong to the HlyB family of ATP-dependent membrane translocators. LcnC contains an ATP binding domain in a conserved C-terminal stretch of approximately 200 amino acids and three putative hydrophobic segments in the N terminus. The lcnD product, LcnD, of 474 amino acids, is essential for lactococcin A expression and shows structural similarities to HlyD and its homologs. On the basis of these results, a secretion apparatus that is essential for the full expression of active lactococcin A is postulated.     

Molecular analyses of the lactococcin A gene cluster from Lactococcus lactis subsp. lactis biovar diacetylactis WM4.

The genes responsible for bacteriocin production and immunity in Lactococcus lactis subsp. lactis biovar diacetylactis WM4 were localized and characterized by DNA restriction fragment deletion, subcloning, and nucleotide sequence analysis. The nucleotide sequence of a 5.6-kb AvaII restriction fragment revealed a cluster with five complete open reading frames (ORFs) in the same orientation. DNA and protein homology analyses, combined with deletion and Tn5 insertion mutagenesis, implicated four of the ORFs in the production of and immunity to lactococcin A. The last two ORFs in the cluster were the lactococcin A structural and immunity genes, lcnA and lciA. The two ORFs immediately upstream of lcnA and lciA were designated lcnC and lcnD, and the proteins that they encoded showed similarities to proteins of signal sequence-independent secretion systems. lcnC encodes a protein of 716 amino acids that could belong to the HlyB family of ATP-dependent membrane translocators. LcnC contains an ATP binding domain in a conserved C-terminal stretch of approximately 200 amino acids and three putative hydrophobic segments in the N terminus. The lcnD product, LcnD, of 474 amino acids, is essential for lactococcin A expression and shows structural similarities to HlyD and its homologs. On the basis of these results, a secretion apparatus that is essential for the full expression of active lactococcin A is postulated.     

Purification and primary structure of pediocin PA-1 produced by Pediococcus acidilactici PAC-1.0.

The plasmid-encoded bacteriocin pediocin PA-1, produced by the gram-positive bacterium Pediococcus acidilactici strain PAC-1.0, was purified to homogeneity. The purified product exhibited antibacterial activity against several gram-positive bacterial strains, including the food pathogen Listeria monocytogenes. Pediocin PA-1 is a 4629-Da peptide with 44 amino acids and two disulfide bonds. The amino acid sequence and arrangement of the disulfide bonds were determined. Sequence data were used to calculate an isoelectric point of 10.0. The small and basic nature of PA-1 is comparable to several other bacteriocins produced by gram-positive bacteria. Reported sequences of other bacteriocins and of other antimicrobial peptides from diverse origins bear no resemblance to the sequence reported here.     

Cloning, expression, and nucleotide sequence of genes involved in production of pediocin PA-1, and bacteriocin from Pediococcus acidilactici PAC1.0.

The production of pediocin PA-1, a small heat-stable bacteriocin, is associated with the presence of the 9.4-kbp plasmid pSRQ11 in Pediococcus acidilactici PAC1.0. It was shown by subcloning of pSRQ11 in Escherichia coli cloning vectors that pediocin PA-1 is produced and, most probably, secreted by E. coli cells. Deletion analysis showed that a 5.6-kbp SalI-EcoRI fragment derived from pSRQ11 is required for pediocin PA-1 production. Nucleotide sequence analysis of this 5.6-kbp fragment indicated the presence of four clustered open reading frames (pedA, pedB, pedC, and pedD). The pedA gene encodes a 62-amino-acid precursor of pediocin PA-1, as the predicted amino acid residues 19 to 62 correspond entirely to the amino acid sequence of the purified pediocin PA-1. Introduction of a mutation in pedA resulted in a complete loss of pediocin production. The pedB and pedC genes, encoding proteins of 112 and 174 amino acid residues, respectively, are located directly downstream of the pediocin structural gene. Functions could not be assigned to their gene products; mutation analysis showed that the PedB protein is not involved in pediocin PA-1 production. The mutation analysis further revealed that the fourth gene, pedD, specifying a relatively large protein of 724 amino acids, is required for pediocin PA-1 production in E. coli. The predicted pedD protein shows strong similarities to several ATP-dependent transport proteins, including the E. coli hemolysin secretion protein HlyB and the ComA protein, which is required for competence induction for genetic transformation in Streptococcus pneumoniae.(ABSTRACT TRUNCATED AT 250 WORDS)     

Nisin-Controlled Production of Pediocin PA-1 and Colicin V in Nisin- and Non-Nisin-Producing Lactococcus lactis Strains

The introduction of chimeric genes encoding the fusion leader of lactococcin A-propediocin PA-1 or procolicin V under the control of the inducible nisA promoter and the lactococcin A-dedicated secretion genes (lcnCD) into Lactococcus lactis strains, including a nisin producer, expressing the two component regulator NisRK led to the production or pediocin PA-1 or colicin V, respectively.     

Production of active pediocin PA-1 in Escherichia coli using a thioredoxin gene fusion expression approach: cloning, expression, purification, and characterization

Antimicrobial peptides possess cationic and amphipathic properties that allow for interactions with the membrane of living cells. Bacteriocins from lactic acid bacteria, in particular, are currently being studied for their potential use as food preservatives and for applications in health care. However, bacteriocin exploitation is often limited owing to low production yields. Gene cloning and heterologous protein or peptide production is one way to possibly achieve overexpression of bacteriocins to support biochemical studies. In this work, production of recombinant active pediocin PA-1 (PedA) was accomplished in Escherichia coli using a thioredoxin (trx) gene fusion (trx-pedA) expression approach. Trx-PedA itself did not show any biological activity, but upon cleavage by an enterokinase, biologically active pediocin PA-1 was obtained. Recombinant pediocin PA-1 characteristics (molecular mass, biological activity, physicochemical properties) were very similar to those of native pediocin PA-1. In addition, a 4- to 5-fold increase in production yield was obtained, by comparison with the PA-1 produced naturally by Pediococcus acidilactici PAC 1.0. The new production method, although not optimized, offers great potential for supporting further investigations on pediocin PA-1 and as a first-generation process for the production of pediocin PA-1 for high-value applications.     

Binding of pediocin PA-1 with anionic lipid induces model membrane destabilization

To obtain molecular insights into the action mode of antimicrobial activity of pediocin PA-1, the interactions between this bacteriocin and dimyristoylphosphatidylcholine (DMPC) or dimyristoylphosphatidylglycerol (DMPG) model membranes have been investigated in D(2)O at pD 6 by Fourier transform infrared spectroscopy. The interactions were monitored with respect to alteration of the secondary structure of pediocin, as registered by the amide I' band, and phospholipid conformation, as revealed by the methylene nu(s)(CH(2)) and carbonyl nu(C;O) stretching vibrations. The results show that no interaction between pediocin and DMPC occurs. By contrast, pediocin undergoes a structural reorganization in the presence of DMPG. Upon heating, pediocin self-aggregates, which is not observed for this pD in aqueous solution. The gel-to-crystalline phase transition of DMPG shifts to higher temperatures with a concomitant dehydration of the interfacial region. Our results indicate that pediocin is an extrinsic peptide and that its action mechanism may lie in a destabilization of the cell membrane.     

Determination of essential and variable residues in pediocin PA-1 by NNK scanning

Pediocin PA-1 is an antimicrobial peptide (called bacteriocin) that shows inhibitory activity against the food-borne pathogen Listeria monocytogenes. To elucidate which residue(s) is responsible for this function, the antimicrobial activities of pediocin PA-1 mutants were evaluated and compared. Each of the 44 native codons was replaced with the NNK triplet oligonucleotide in a technique termed NNK scanning, and 35 mutations at each position were examined for antimicrobial activities using a modified colony overlay screening method. As a consequence, the functional responsibility of each residue was estimated by counting the number of active mutants, allowing us to identify candidate essential/variable residues. Activity was abrogated by many of the mutations at residues Y2, G6, C9, C14, C24, W33, G37, and C44, indicating that these residues may be essential. In contrast, activity was retained by almost all versions harboring mutations at K1, T8, G10, S13, G19, N28, and N41, indicating that these are functionally redundant residues. Sequence analysis revealed that only the wild type was active and 14 and 11 substitutions were inactive at G6 and C14, respectively, while 12 and 11 substitutions were active and 2 and 0 substitutions were inactive at T8 and K1, respectively. These findings suggest that NNK scanning is effective for determining essential and variable residues in pediocin PA-1, leading to an elucidation of structure-function relationships and to improvements in the antimicrobial function efficiently by peptide engineering.     

Cloning, expression, and nucleotide sequence of genes involved in production of pediocin PA-1, and bacteriocin from Pediococcus acidilactici PAC1.0.

The production of pediocin PA-1, a small heat-stable bacteriocin, is associated with the presence of the 9.4-kbp plasmid pSRQ11 in Pediococcus acidilactici PAC1.0. It was shown by subcloning of pSRQ11 in Escherichia coli cloning vectors that pediocin PA-1 is produced and, most probably, secreted by E. coli cells. Deletion analysis showed that a 5.6-kbp SalI-EcoRI fragment derived from pSRQ11 is required for pediocin PA-1 production. Nucleotide sequence analysis of this 5.6-kbp fragment indicated the presence of four clustered open reading frames (pedA, pedB, pedC, and pedD). The pedA gene encodes a 62-amino-acid precursor of pediocin PA-1, as the predicted amino acid residues 19 to 62 correspond entirely to the amino acid sequence of the purified pediocin PA-1. Introduction of a mutation in pedA resulted in a complete loss of pediocin production. The pedB and pedC genes, encoding proteins of 112 and 174 amino acid residues, respectively, are located directly downstream of the pediocin structural gene. Functions could not be assigned to their gene products; mutation analysis showed that the PedB protein is not involved in pediocin PA-1 production. The mutation analysis further revealed that the fourth gene, pedD, specifying a relatively large protein of 724 amino acids, is required for pediocin PA-1 production in E. coli. The predicted pedD protein shows strong similarities to several ATP-dependent transport proteins, including the E. coli hemolysin secretion protein HlyB and the ComA protein, which is required for competence induction for genetic transformation in Streptococcus pneumoniae.(ABSTRACT TRUNCATED AT 250 WORDS)     

Production of pediocin PA-1 in the methylotrophic yeast Pichia pastoris reveals unexpected inhibition of its biological activity due to the presence of collagen-like material

Expression of the pedA gene from Pediococcus acidilactici, coding for mature bacteriocin Pediocin PA-1, was investigated using the yeast Pichia pastoris to obtain larger quantities of pediocin to support additional studies, including structure-function research. Following various cloning strategies, a KM71H (Mut(s)) strain was selected. A significant concentration (74 microg/ml) of extracellular recombinant pediocin was obtained but the pediocin showed no biological activity. Supernatant fluids from P. pastoris cultures, harboring or not pedA, inhibited the biological activity of natural pediocin PA-1. The recombinant pediocin appeared as a mixture of three main fractions (7-8, 11, 20 kDa vs. 4.6 kDa for natural pediocin PA-1). The recombinant pediocin was also less hydrophobic and behaved differently when subjected to isoelectric focusing. Strong evidence indicated that some "collagen-like" material was tightly associated, most probably via covalent binding, to the recombinant pediocin. The "collagen-like" material was most probably responsible for the lack of biological activity of the recombinant pediocin and for the differences observed regarding some of the physico-chemical properties. Both the recombinant pediocin and natural pediocin were sensitive to collagenase, suggesting that pediocin PA-1 may possess a somewhat "collagen-like" nature. Interestingly, recombinant pediocin preparations showed the ability to assemble into fibrils.     

Engineering Increased Stability in the Antimicrobial Peptide Pediocin PA-1

Pediocin PA-1 is a food grade antimicrobial peptide that has been used as a food preservative. Upon storage at 4°C or room temperature, pediocin PA-1 looses activity, and there is a concomitant 16-Da increase in the molecular mass. It is shown that the loss of activity follows first-order kinetics and that the instability can be prevented by replacing the single methionine residue (Met31) in pediocin PA-1. Replacing Met by Ala, Ile, or Leu protected the peptide from oxidation and had only minor effects on bacteriocin activity (for most indicator strains 100% activity was maintained). Replacement of Met by Asp was highly deleterious for bacteriocin activity.