Characterization of diphtheria toxin's catalytic domain interaction with lipid membranes

In response to a low environmental pH and with the help of the B fragment (DTB) the catalytic domain of diphtheria toxin (DTA) crosses the endosomal membrane to inhibit protein synthesis. In this study, we investigated the interaction of DTA with lipid membranes by biochemical and biophysical approaches. Data obtained from proteinase K and trypsin digestion experiments of membrane-inserted DTA suggested that residues 134-157 may adopt a transmembrane orientation and residues 77-100 could be membrane-associated, adopting either a surface or a transmembrane orientation. Fourier transform infrared spectroscopy analysis (FTIR) was used to characterize the secondary and tertiary structure of DTA along its pathway, from the native secreted form at pH 7.2 to the refolded structure at neutral pH after interaction with and desorption from a lipid membrane. We found that the association of DTA with lipid membranes at low pH was characterized by an increase of β-sheet structures and that the refolded structure at neutral pH after interaction with the membrane was identical to the native structure at the same pH. We also investigated the desorption of DTA from the membrane at neutral pH as a function of temperature. Although a complete desorption was observed at 37 °C, no desorption took place at 4 °C. A model of translocation involving the possibility that DTA might insert one or several transient transmembrane domains during translocation is discussed.     

Structure of the monomeric outer-membrane porin OmpG in the open and closed conformation

OmpG, a monomeric pore-forming protein from Escherichia coli outer membranes, was refolded from inclusion bodies and crystallized in two different conformations. The OmpG channel is a 14-stranded beta-barrel, with short periplasmic turns and seven extracellular loops. Crystals grown at neutral pH show the channel in the open state at 2.3 A resolution. In the 2.7 A structure of crystals grown at pH 5.6, the pore is blocked by loop 6, which folds across the channel. The rearrangement of loop 6 appears to be triggered by a pair of histidine residues, which repel one another at acidic pH, resulting in the breakage of neighbouring H-bonds and a lengthening of loop 6 from 10 to 17 residues. A total of 151 ordered LDAO detergent molecules were found in the 2.3 A structure, mostly on the hydrophobic outer surface of OmpG, mimicking the outer membrane lipid bilayer, with three LDAO molecules in the open pore. In the 2.7 A structure, OmpG binds one OG and one glucose molecule as sugar substrates in the closed pore.     

Lipid-protein interactions as determinants of membrane protein structure and function

To determine how the lipid environment affects membrane protein structure and function, strains of Escherichia coli were developed in which normal phospholipid composition can be altered or foreign lipids can be introduced. The properties of LacY (lactose permease) were investigated as a function of lipid environment. Assembly of LacY in membranes lacking PE (phosphatidylethanolamine) results in misorientation of the N-terminal six-TM (transmembrane domain) helical bundle with loss of energy-dependent uphill transport and retention of energy-independent downhill transport. Post-assembly introduction of PE results in nearly native orientation of TMs and restoration of uphill transport. Foreign lipids with no net charge can substitute for PE in supporting native LacY topology, but restoration of uphill transport is dependent on native topology and the proper folding of a solvent-exposed domain. Increasing the positive charge density of the cytoplasmically exposed surface of LacY counters TM misorientation in the absence of neutral lipids, demonstrating that charge interactions between these domains and the surface of the membrane bilayer are determinants of TM orientation. Therefore membrane protein organization or reorganization is determined either during initial assembly or post-insertionally through direct interactions between the protein and the lipid environment, which affects the topogenic potency of opposing charged residues as topological signals independent of the translocon.     

Expression, two-dimensional crystallization, and three-dimensional reconstruction of the beta8 outer membrane protein Omp21 from Comamonas acidovorans

The Omp21 protein from the proteobacterium Comamonas (Delftia) acidovorans belongs to the recently described beta8 family of outer membrane proteins, characterized by eight antiparallel beta-strands which form a beta-barrel. This family includes virulence proteins, OmpA and OmpX from Escherichia coli, and other related molecules. After we established an expression system, recombinant Omp21 was purified by Ni(2+) chelation affinity chromatography and refolded in situ while bound to resin. The native state of refolded protein was proven by FTIR spectroscopy and monitored with denaturing PAGE (heat modification). Both native and recombinant Omp21 were reconstituted in lipid membranes and crystallized two-dimensionally by controlled dialysis. Recombinant Omp21 crystallized as dimer and formed a p22(1)2(1) lattice with constants of a = 11.1 nm, b = 12.2 nm, gamma = 89.5 degrees. The 3-D structure of negatively stained, recombinant Omp21 was determined at a resolution of 1.8 nm by means of electron crystallography. Comparison with 3-D maps of OmpX and the transmembrane domain of OmpA revealed a high similarity between the mass distribution of exoplasmic loops of Omp21 and OmpA.     

Spectroscopic evidence of tetanus toxin translocation domain bilayer-induced refolding and insertion

Tetanus neurotoxin (TeNT) is an A-B toxin with three functional domains: endopeptidase, translocation (HCT), and receptor binding. Endosomal acidification triggers HCT to interact with and insert into the membrane, translocating the endopeptidase across the bilayer. Although the function of HCT is well defined, the mechanism by which it accomplishes this task is unknown. To gain insight into the HCT membrane interaction on both local and global scales, we utilized an isolated, beltless HCT variant (bHCT), which retained the ability to release potassium ions from vesicles. To examine which bHCT residues interact with the membrane, we widely sampled the surface of bHCT using 47 single-cysteine variants labeled with the environmentally sensitive fluorophore NBD. At neutral pH, no interaction was observed for any variant. In contrast, all NBD-labeled positions reported environmental change in the presence of acidic pH and membranes containing anionic lipids. We then examined the conformation of inserted bHCT using circular dichroism and intrinsic fluorescence. Upon entering the membrane, bHCT retained predominantly α-helical secondary structure, whereas the tertiary structure exhibited substantial refolding. The use of lipid-attached quenchers revealed that at least one of the three tryptophan residues penetrated deep into the hydrocarbon core of the membrane, suggesting formation of a bHCT transmembrane conformation. The possible conformational topology was further explored with the hydropathy analysis webtool MPEx, which identified a large, potential α-helical transmembrane region. Altogether, the spectroscopic evidence supports a model in which, upon acidification, the majority of TeNT bHCT entered the membrane with a concurrent change in tertiary structure.     

Orientation of the Escherichia coli outer membrane protein OmpX in phospholipid bilayer membranes determined by solid-State NMR

The solid-state NMR orientation-dependent frequencies measured for membrane proteins in macroscopically oriented lipid bilayers provide precise orientation restraints for structure determination in membranes. Here we show that this information can also be used to supplement crystallographic structural data to establish the orientation of a membrane protein in the membrane. This is achieved by incorporating a few orientation restraints, measured for the Escherichia coli outer membrane protein OmpX in magnetically oriented lipid bilayers (bicelles), in a simulated annealing calculation with the coordinates of the OmpX crystal structure. The (1)H-(15)N dipolar couplings measured for the seven Phe residues of OmpX in oriented bilayers can be assigned by back-calculation of the NMR spectrum from the crystal structure and are sufficient to establish the three-dimensional orientation of the protein in the membrane, while the (15)N chemical shifts provide a measure of cross-validation for the analysis. In C14 lipid bilayers, OmpX adopts a transmembrane orientation with a 7 degrees tilt of its beta-barrel axis relative to the membrane normal, matching the hydrophobic thickness of the barrel with that of the membrane.     

Multistep regulation of membrane insertion of the fusion peptide of Semliki Forest virus

A prevailing model for virus membrane fusion proteins has been that the hydrophobic fusion peptide is hidden in the prefusion conformation, becomes exposed once the fusion reaction is triggered, and then either inserts into target membranes or is rapidly inactivated. This model is in general agreement with the structure and mechanism of class I fusion proteins, such as the influenza virus hemagglutinin. We here describe studies of the class II fusion protein E1 from the alphavirus Semliki Forest virus (SFV). SFV fusion is triggered by low pH, which releases E1 from its heterodimeric interaction with the E2 protein and induces the formation of a stable E1 homotrimer. The exposure and target membrane interaction of the E1 fusion peptide (residues 83 to 100) were followed using a monoclonal antibody (MAb E1f) mapping to E1 residues 85 to 95. In agreement with the known structure of SFV and other alphaviruses, the fusion peptide was shielded in native SFV particles and exposed when E1-E2 dimer dissociation was triggered by acidic pH. In contrast, the fusion peptide on purified E1 ectodomains (E1(*)) was fully accessible at neutral pH. Functional assays showed that MAb E1f binding at neutral pH prevented subsequent low-pH-triggered E1(*) interaction with target membranes and trimerization. E1(*) was not inactivated by low pH when treated either in the absence of target membranes or in the presence of fusion-inactive cholesterol-deficient liposomes. Thus, the membrane insertion of the E1 fusion peptide is regulated by additional low-pH-dependent steps after exposure, perhaps involving an E1-cholesterol interaction.     

Biogenesis and transmembrane topology of the CHIP28 water channel at the endoplasmic reticulum

CHIP28 is a 28-kD hydrophobic integral membrane protein that functions as a water channel in erythrocytes and renal tubule epithelial cell membranes. We examined the transmembrane topology of CHIP28 in the ER by engineering a reporter of translocation (derived from bovine prolactin) into nine sequential sites in the CHIP28 coding region. The resulting chimeras were expressed in Xenopus oocytes, and the topology of the reporter with respect to the ER membrane was determined by protease sensitivity. We found that although hydropathy analysis predicted up to seven potential transmembrane regions, CHIP28 spanned the membrane only four times. Two putative transmembrane helices, residues 52-68 and 143-157, reside on the lumenal and cytosolic surfaces of the ER membrane, respectively. Topology derived from these chimeric proteins was supported by cell-free translation of five truncated CHIP28 cDNAs, by N-linked glycosylation at an engineered consensus site in native CHIP28 (residue His69), and by epitope tagging of the CHIP28 amino terminus. Defined protein chimeras were used to identify internal sequences that direct events of CHIP28 topogenesis. A signal sequence located within the first 52 residues initiated nascent chain translocation into the ER lumen. A stop transfer sequence located in the hydrophobic region from residues 90-120 terminated ongoing translocation. A second internal signal sequence, residues 155-186, reinitiated translocation of a COOH-terminal domain (residues 186-210) into the ER lumen. Integration of the nascent chain into the ER membrane occurred after synthesis of 107 residues and required the presence of two membrane-spanning regions. From this data, we propose a structural model for CHIP28 at the ER membrane in which four membrane- spanning alpha-helices form a central aqueous channel through the lipid bilayer and create a pathway for water transport.     

Voltage-dependent orientation of membrane proteins

In order to study the influence of electrostatic forces on the disposition of proteins in membranes, we have examined the interaction of a receptor protein and of a membrane-active peptide with black lipid membranes. In the first study we show that the hepatic asialoglycoprotein receptor can insert spontaneously into lipid bilayers from the aqueous medium. Under the influence of a trans-positive membrane potential, the receptor, a negatively charged protein, appears to change its disposition with respect to the membrane. In the second study we consider melittin, an amphipathic peptide containing a generally hydrophobic stretch of 19 amino acids followed by a cluster of four positively charged residues at the carboxy terminus. The hydrophobic region contains two positively charged residues. In response to trans-negative electrical potential, melittin appears to assume a transbilayer position. These findings indicate that electrostatic forces can influence the disposition, and perhaps the orientation, of membrane proteins. Given the inside-negative potential of most or all cells, we would expect transmembrane proteins to have clusters of positively charged residues adjacent to the cytoplasmic ends of their hydrophobic transmembrane segments, and clusters of negatively charged residues just to the extracytoplasmic side. This expectation has been borne out by examination of the few transmembrane proteins for which there is sufficient information on both sequence and orientation. Surface and dipole potentials may similarly affect the orientation of membrane proteins.     

How interaction of perfringolysin O with membranes is controlled by sterol structure, lipid structure, and physiological low pH: insights into the origin of perfringolysin O-lipid raft interaction

Perfringolysin O (PFO) is a sterol-dependent, pore-forming cytolysin. To understand the molecular basis of PFO membrane interaction, we studied its dependence upon sterol and lipid structure and aqueous environment. PFO interacted with diverse sterols, although binding was affected by double bond location in the sterol rings, sterol side chain structure, and sterol polar group structure. Importantly, a sterol structure promoting formation of ordered membrane domains (lipid rafts) was not critical for interaction. PFO membrane interaction was also affected by phospholipid acyl chain structure, being inversely related to tight acyl chain packing with cholesterol. Experiments using the pre-pore Y181A mutant demonstrated that sterol binding strength and specificity was not affected by whether PFO forms a transmembrane beta-barrel. Combined, these observations are consistent with a model in which the strength and specificity of sterol interaction arises from both sterol interactions with domain 4 and sterol chemical activity within membranes. The lipid raft-binding portions of sterol bound to PFO may remain largely exposed to the lipid bilayer. These results place important constraints upon the origin of PFO raft affinity. Additional experiments demonstrated that the structure of membrane-inserted PFO at low and neutral pH was similar as judged by the effect of phospholipid and sterol structure upon PFO properties and membrane interaction. However, low pH enhanced PFO membrane binding, oligomerization, and pore formation. In lipid vesicles mimicking the exofacial (outer) membrane leaflet, PFO-membrane binding was maximal at pH 5.5-6. This is consistent with the hypothesis that PFO function involves acidic vacuoles.     

Influenza hemagglutinin assumes a tilted conformation during membrane fusion as determined by attenuated total reflection FTIR spectroscopy.

Fusion of influenza virus with target membranes is mediated by an acid-induced conformational change of the viral fusion protein hemagglutinin (HA) involving an extensive reorganization of the alpha-helices. A 'spring-loaded' displacement over at least 100 A provides a mechanism for the insertion of the fusion peptide into the target membrane, but does not explain how the two membranes are brought into fusion contact. Here we examine, by attenuated total reflection Fourier transform infrared spectroscopy, the secondary structure and orientation of HA reconstituted in planar membranes. At neutral pH, the orientation of the HA trimers in planar membranes is approximately perpendicular to the membrane. However, at the pH of fusion, the HA trimers are tilted 55-70 degrees from the membrane normal in the presence or absence of bound target membranes. In the absence of target membranes, the overall secondary structure of HA at the fusion pH is similar to that at neutral pH, but approximately 50-60 additional residues become alpha-helical upon the conformational change in the presence of bound target membranes. These results are discussed in terms of a structural model for the fusion intermediate of influenza HA.     

Structure of the membrane domain of subunit b of the Escherichia coli F0F1 ATP synthase.

The structure of the N-terminal transmembrane domain (residues 1-34) of subunit b of the Escherichia coli F0F1-ATP synthase has been solved by two-dimensional 1H NMR in a membrane mimetic solvent mixture of chloroform/methanol/H2O (4:4:1). Residues 4-22 form an alpha-helix, which is likely to span the hydrophobic domain of the lipid bilayer to anchor the largely hydrophilic subunit b in the membrane. The helical structure is interrupted by a rigid bend in the region of residues 23-26 with alpha-helical structure resuming at Pro-27 at an angle offset by 20 degrees from the transmembrane helix. In native subunit b, the hinge region and C-terminal alpha-helical segment would connect the transmembrane helix to the cytoplasmic domain. The transmembrane domains of the two subunit b in F0 were shown to be close to each other by cross-linking experiments in which single Cys were substituted for residues 2-21 of the native subunit and b-b dimer formation tested after oxidation with Cu(II)(phenanthroline)2. Cys residues that formed disulfide cross-links were found with a periodicity indicative of one face of an alpha-helix, over the span of residues 2-18, where Cys at positions 2, 6, and 10 formed dimers in highest yield. A model for the dimer is presented based upon the NMR structure and distance constraints from the cross-linking data. The transmembrane alpha-helices are positioned at a 23 degrees angle to each other with the side chains of Thr-6, Gln-10, Phe-14, and Phe-17 at the interface between subunits. The change in direction of helical packing at the hinge region may be important in the functional interaction of the cytoplasmic domains.     

Translocation of positively charged copoly(Lys/Tyr) across phospholipid membranes

Much attention has recently been paid to the study of positively charged polypeptides as a possible carrier for therapeutic protein or DNA delivery to cells. In this study, we have investigated the translocation of positively charged copoly(Lys/Tyr) (MW=72000, DP=385) across lipid membranes constituted from egg-phosphatidylcholine (EPC), dioleoyl-phosphatidylethanolamine (DOPE), as well as soybean phospholipids (SBPL) using zeta potential method, circular dichroism spectroscopy (CD), electrophysiology technique, fluorescence spectroscopy, and confocal laser scanning microscopy. Results of zeta potentials show that copoly(Lys/Tyr) associate with lipid membranes and become gradually saturated on the membranes either hydrophobically or electrostatically or both. CD studies demonstrate that the copoly(Lys/Tyr) takes and remains beta-sheet conformation during its interaction with liposome membranes, indicating that the translocation process should be carpet-mode like. Data from the electrophysiology technique reveal that positively charged copoly(Lys/Tyr) can cause transmembrane currents under an applied voltage, confirming its transfer across lipid membranes. Fluorescence spectroscopy results display a three-step mechanism of translocation across membrane: adsorption, transportation, and desorption, which has been verified by results from confocal laser scanning microscopy. We provided the first direct observation that the positively charged polypeptides, copoly(Lys/Tyr), can translocate through SBPL and EPC/DOPE lipid bilayer membranes. In addition, we found that the translocation efficiency of copoly(Lys/Tyr) was higher on the EPC/DOPE lipid membrane than on the SBPL lipid membrane.     

Lipid saturation and head group composition have a pronounced influence on the membrane insertion equilibrium of amphipathic helical polypeptides

The histidine-rich peptides of the LAH4 family were designed using cationic antimicrobial peptides such as magainin and PGLa as templates. The LAH4 amphipathic helical sequences exhibit a multitude of interesting biological properties such as antimicrobial activity, cell penetration of a large variety of cargo and lentiviral transduction enhancement. The parent peptide associates with lipid bilayers where it changes from an orientation along the membrane interface into a transmembrane configuration in a pH-dependent manner. Here we show that LAH4 adopts a transmembrane configuration in fully saturated DMPC membranes already at pH 3.5, i.e. much below the pK_a of the histidines whereas the transition pH in POPC correlates closely with histidine neutralization. In contrast in POPG membranes the in-planar configuration is stabilized by about one pH unit. The differences in pH can be converted into energetic contributions for the in-plane to transmembrane transition equilibrium, where the shift in the transition pH due to lipid saturation corresponds to energies which are otherwise obtained by the exchange of several cationic with hydrophobic residues. A similar dependence on lipid saturation has also been observed when the PGLa and magainin antimicrobial peptides interact within lipid bilayers suggesting that the quantitative evaluation presented in this paper also applies to other membrane polypeptides.     

Secondary structures comparison of aquaporin-1 and bacteriorhodopsin: a Fourier transform infrared spectroscopy study of two-dimensional membrane crystals.

Aquaporins are integral membrane proteins found in diverse animal and plant tissues that mediate the permeability of plasma membranes to water molecules. Projection maps of two-dimensional crystals of aquaporin-1 (AQP1) reconstituted in lipid membranes suggested the presence of six to eight transmembrane helices in the protein. However, data from other sequence and spectroscopic analyses indicate that this protein may adopt a porin-like beta-barrel fold. In this paper, we use Fourier transform infrared spectroscopy to characterize the secondary structure of highly purified native and proteolyzed AQP1 reconstituted in membrane crystalline arrays and compare it to bacteriorhodopsin. For this analysis the fractional secondary structure contents have been determined by using several different algorithms. In addition, a neural network-based evaluation of the Fourier transform infrared spectra in terms of numbers of secondary structure segments and their interconnections [sij] has been performed. The following conclusions were reached: 1) AQP1 is a highly helical protein (42-48% alpha-helix) with little or no beta-sheet content. 2) The alpha-helices have a transmembrane orientation, but are more tilted (21 degrees or 27 degrees, depending on the considered refractive index) than the bacteriorhodopsin helices. 3) The helices in AQP1 undergo limited hydrogen/deuterium exchange and thus are not readily accessible to solvent. Our data support the AQP1 structural model derived from sequence prediction and epitope insertion experiments: AQP1 is a protein with at least six closely associated alpha-helices that span the lipid membrane.     

The activation energy for insertion of transmembrane alpha-helices is dependent on membrane composition

The physical mechanisms that govern the folding and assembly of integral membrane proteins are poorly understood. It appears that certain properties of the lipid bilayer affect membrane protein folding in vitro, either by modulating helix insertion or packing. In order to begin to understand the origin of this effect, we investigate the effect of lipid forces on the insertion of a transmembrane alpha-helix using a water-soluble, alanine-based peptide, KKAAAIAAAAAIAAWAAIAAAKKKK-amide. This peptide binds to preformed 1,2-dioleoyl-l-alpha-phosphatidylcholine (DOPC) vesicles at neutral pH, but spontaneous transmembrane helix insertion directly from the aqueous phase only occurs at high pH when the Lys residues are de-protonated. These results suggest that the translocation of charge is a major determinant of the activation energy for insertion. Time-resolved measurements of the insertion process at high pH indicate biphasic kinetics with time constants of ca 30 and 430 seconds. The slower phase seems to correlate with formation of a predominantly transmembrane alpha-helical conformation, as determined from the transfer of the tryptophan residue to the hydrocarbon region of the membrane. Temperature-dependent measurements showed that insertion can proceed only above a certain threshold temperature and that the Arrhenius activation energy is of the order of 90 kJ mol(-1). The kinetics, threshold temperature and the activation energy change with the mole fraction of 1,2-dioleoyl-l-alpha-phosphatidylethanolamine (DOPE) introduced into the DOPC membrane. The activation energy increases with increasing DOPE content, which could reflect the fact that this lipid drives the bilayer towards a non-bilayer transition and increases the lateral pressure in the lipid chain region. This suggests that folding events involving the insertion of helical segments across the bilayer can be controlled by lipid forces.     

Tracking the unfolding and refolding pathways of outer membrane protein porin from Paracoccus denitrificans

We have investigated outer membrane protein porin from Paracoccus denitrificans for its stability against heat and pH. Pathways of unfolding and refolding have been analyzed. Porin incubated at pH 12.5 and above undergoes a slow unfolding into an unordered structure. The unfolded protein could be refolded into a nativelike structure that is functionally active but with distinct deviation from the native protein. This nativelike structure exhibited an entirely different thermal stability. Although aggregation is normally considered a structural "dead-end", the possibility of opening an aggregated porin and forming a functionally active structure was analyzed here. Porin aggregates on heating above 86.2 degrees C. Incubating the heat-aggregated protein at high pH (> or = 12.5) leads to a slow opening of the protein into an unordered structure. It was possible to refold this unordered protein into a trimeric nativelike structure which was capable of forming active pores. However, the thermal stability of the refolded porin was unlike that of the native porin. To understand the basic mechanism behind the unfolding processes, the protein was subjected to heating at various pH values. It was observed that at pH > or = 12.5 the protein does not aggregate upon heating; instead, it opens into an unordered structure. We conclude that at high pH values, the electrostatic interactions of various amino acid residues are perturbed which leads to unfolding into an unordered structure. This study shows for the first time an entirely new unfolding and refolding pathway for porin.     

Solution structure of the eukaryotic pore-forming cytolysin equinatoxin II: implications for pore formation

Sea anemones produce a family of 18-20 kDa proteins, the actinoporins, that lyse cells by forming pores in cell membranes. Sphingomyelin plays an important role in their lytic activity, with membranes lacking this lipid being largely refractory to these toxins. The structure of the actinoporin equinatoxin II in aqueous solution, determined from NMR data, consists of two short helices packed against opposite faces of a beta-sandwich structure formed by two five-stranded beta-sheets. The protein core has extensive hydrophobic interfaces formed by residues projecting from the internal faces of the two beta-sheets. 15N relaxation data show uniform backbone dynamics, implying that equinatoxin II in solution is relatively rigid, except at the N terminus; its inferred rotational correlation time is consistent with values for monomeric proteins of similar mass. Backbone amide exchange rate data also support the view of a stable structure, even though equinatoxin II lacks disulfide bonds. As monitored by NMR, it unfolds at around 70 degrees C at pH 5.5. At 25 degrees C the structure is stable over the pH range 2.5-7.3 but below pH 2.5 it undergoes a slow transition to an incompletely unfolded structure resembling a molten globule. Equinatoxin II has two significant patches of positive electrostatic potential formed by surface-exposed Lys and Arg residues, which may assist its interaction with charged regions of the lipid head groups. Tyr and Trp residues on the surface may also contribute by interacting with the carbonyl groups of the acyl chains of target membranes. Data from mutational studies and truncated analogues identify two regions of the protein involved in membrane interactions, the N-terminal helix and the Trp-rich region. Once the protein is anchored, the N-terminal helix may penetrate the membrane, with up to four helices lining the pore, although other mechanisms of pore formation cannot be ruled out.     

pH-Dependent conformational changes and topology of a herpesvirus translocating peptide in a membrane-mimetic environment

Pol peptide, an oligopeptide corresponding to the 27 C-terminal amino acids of DNA polymerase from herpes simplex virus type 1, has recently been suggested to translocate from endosomal compartments into the cytosol after being intracellularly delivered via a protein carrier. While an acidic environment was thought to be important for Pol peptide membrane translocation, the mechanism of translocation remains unclear. To investigate the influence of an acidic environment on the conformational properties of the peptide and on its propensity to interact with lipid bilayers, we characterized the structure of Pol peptide at different pH values by both circular dichroism (CD) and nuclear magnetic resonance (NMR) spectroscopy. The influence of detergent micelles, which mimic biological lipid membranes, on the peptide secondary structure was also studied. Our CD results indicate that the peptide is in a random conformation in aqueous solution at both acidic and basic pH, whereas in the presence of dodecylphosphocholine (DPC) micelles, it assumes a partial alpha-helical structure which is significantly pH-dependent. An NMR study confirmed that, in the presence of DPC micelles, a short C-terminal alpha-helix is present at pH 6.5, whereas almost two-thirds of the peptide (residues 10-26) fold into an extended amphipathic alpha-helix at pH 4.0. The orientation of Pol peptide relative to the DPC micelle was investigated using paramagnetic probes at both pH 4.0 and 6.5. These studies show that the peptide inserts deeply into the micelle at pH 4.0, whereas it is more exposed to the aqueous environment at pH 6.5. On the basis of these results, a model which might explain the mechanism of translocation of Pol peptide from acidic endosomes to the cytosol is discussed.     

Tuning the insertion properties of pHLIP

The pH (low) insertion peptide (pHLIP) has exceptional characteristics: at neutral pH it is an unstructured monomer in solution or when bound to lipid bilayer surfaces, and it inserts across a lipid bilayer as a monomeric alpha-helix at acidic pH. The peptide targets acidic tissues in vivo and may be useful in cancer biology for delivery of imaging or therapeutic molecules to acidic tumors. To find ways to vary its useful properties, we have designed and analyzed pHLIP sequence variants. We find that each of the Asp residues in the transmembrane segment is critical for solubility and pH-dependent membrane insertion of the peptide. Changing both of the Asp residues in the transmembrane segment to Glu, inserting an additional Asp into the transmembrane segment, or replacing either of the Asp residues with Ala leads to aggregation and/or loss of pH-dependent membrane insertion of the peptide. However, variants with either of the Asp residues changed to Glu remained soluble in an aqueous environment and inserted into the membrane at acidic pH with a higher pK_app of membrane insertion.