The bottle gourd genome provides insights into Cucurbitaceae evolution and facilitates mapping of a Papaya ring‐spot virus resistance locus

Bottle gourd (Lagenaria siceraria) is an important vegetable crop as well as a rootstock for other cucurbit crops. In this study, we report a high‐quality 313.4‐Mb genome sequence of a bottle gourd inbred line, USVL1VR‐Ls, with a scaffold N50 of 8.7 Mb and the longest of 19.0 Mb. About 98.3% of the assembled scaffolds are anchored to the 11 pseudomolecules. Our comparative genomic analysis identifies chromosome‐level syntenic relationships between bottle gourd and other cucurbits, as well as lineage‐specific gene family expansions in bottle gourd. We reconstructed the genome of the most recent common ancestor of Cucurbitaceae, which revealed that the ancestral Cucurbitaceae karyotypes consisted of 12 protochromosomes with 18 534 protogenes. The 12 protochromosomes are largely retained in the modern melon genome, while have undergone different degrees of shuffling events in other investigated cucurbit genomes. The 11 bottle gourd chromosomes derive from the ancestral Cucurbitaceae karyotypes followed by 19 chromosomal fissions and 20 fusions. The bottle gourd genome sequence has facilitated the mapping of a dominant monogenic locus, Prs, conferring Papaya ring‐spot virus (PRSV) resistance in bottle gourd, to a 317.8‐kb region on chromosome 1. We have developed a cleaved amplified polymorphic sequence (CAPS) marker tightly linked to the Prs locus and demonstrated its potential application in marker‐assisted selection of PRSV resistance in bottle gourd. This study provides insights into the paleohistory of Cucurbitaceae genome evolution, and the high‐quality genome sequence of bottle gourd provides a useful resource for plant comparative genomics studies and cucurbit improvement.     

Chromosomal‐level assembly of Takifugu obscurus (Abe, 1949) genome using third‐generation DNA sequencing and Hi‐C analysis

The Tetraodontidae family are known to have relatively small and compact genomes compared to other vertebrates. The obscure puffer fish Takifugu obscurus is an anadromous species that migrates to freshwater from the sea for spawning. Thus the euryhaline characteristics of T. obscurus have been investigated to gain understanding of their survival ability, osmoregulation, and other homeostatic mechanisms in both freshwater and seawater. In this study, a high quality chromosome‐level reference genome for T. obscurus was constructed using long‐read Pacific Biosciences (PacBio) Sequel sequencing and a Hi‐C‐based chromatin contact map platform. The final genome assembly of T. obscurus is 381 Mb, with a contig N50 length of 3,296 kb and longest length of 10.7 Mb, from a total of 62 Gb of raw reads generated using single‐molecule real‐time sequencing technology from a PacBio Sequel platform. The PacBio data were further clustered into chromosome‐scale scaffolds using a Hi‐C approach, resulting in a 373 Mb genome assembly with a contig N50 length of 15.2 Mb and and longest length of 28 Mb. When we directly compared the 22 longest scaffolds of T. obscurus to the 22 chromosomes of the tiger puffer Takifugu rubripes, a clear one‐to‐one orthologous relationship was observed between the two species, supporting the chromosome‐level assembly of T. obscurus. This genome assembly can serve as a valuable genetic resource for exploring fugu‐specific compact genome characteristics, and will provide essential genomic information for understanding molecular adaptations to salinity fluctuations and the evolution of osmoregulatory mechanisms.     

Chromosome‐level genome assembly of the predator Propylea japonica to understand its tolerance to insecticides and high temperatures

The ladybird beetle Propylea japonica is an important natural enemy in agro‐ecological systems. Studies on the strong tolerance of P. japonica to high temperatures and insecticides, and its population and phenotype diversity have recently increased. However, abundant genome resources for obtaining insights into stress‐resistance mechanisms and genetic intra‐species diversity for P. japonica are lacking. Here, we constructed the P. japonica genome maps using Pacific Bioscience (PacBio) and Illumina sequencing technologies. The genome size was 850.90 Mb with a contig N50 of 813.13 kb. The Hi‐C sequence data were used to upgrade draft genome assemblies; 4,777 contigs were assembled to 10 chromosomes; and the final draft genome assembly was 803.93 Mb with a contig N50 of 813.98 kb and a scaffold N50 of 100.34 Mb. Approximately 495.38 Mb of repeated sequences was annotated. The 18,018 protein‐coding genes were predicted, of which 95.78% were functionally annotated, and 1,407 genes were species‐specific. The phylogenetic analysis showed that P. japonica diverged from the ancestor of Anoplophora glabripennis and Tribolium castaneum ~ 236.21 million years ago. We detected that some important gene families involved in detoxification of pesticides and tolerance to heat stress were expanded in P. japonica, especially cytochrome P450 and Hsp70 genes. Overall, the high‐quality draft genome sequence of P. japonica will provide invaluable resource for understanding the molecular mechanisms of stress resistance and will facilitate the research on population genetics, evolution and phylogeny of Coccinellidae. This genome will also provide new avenues for conserving the diversity of predator insects.     

First report of powdery mildew caused by Podosphaera xanthii on Luffa acutangula in Odisha State,India

Abstract

Ridge gourd (Luffa acutangula) is an herbaceous perennial twining vine cultivated globally as vegetable and medicinal plant. During October to January in 2014 and 2015, 40% powdery mildew disease incidence was observed in different areas of Odisha state, India. The pathogenicity experiments confirmed the powdery mildew disease symptoms on artificially inoculated L. acutangula seedlings. Causal organism was identified as Podosphaera xanthii on the basis of morphological and molecular studies. This is the first report of powdery mildew disease on L. acutangula caused by P. xanthii.     

Chromosome‐level genome assembly of an important pine defoliator,Dendrolimus punctatus (Lepidoptera; Lasiocampidae)

Dendrolimus spp. are important destructive pests of conifer forests, and Dendrolimus punctatus Walker (Lepidoptera; Lasiocampidae) is the most widely distributed Dendrolimus species. During periodic outbreaks, this species is said to make “fire without smoke” because large areas of pine forest can be quickly and heavily damaged. Yet, little is known about the molecular mechanisms that underlie the unique ecological characteristics of this forest insect. Here, we combined Pacific Biosciences (PacBio) RSII single‐molecule long reads and high‐throughput chromosome conformation capture (Hi‐C) genomics‐linked reads to produce a high‐quality, chromosome‐level reference genome for D. punctatus. The final assembly was 614 Mb with contig and scaffold N50 values of 1.39 and 22.15 Mb, respectively, and 96.96% of the contigs anchored onto 30 chromosomes. Based on the prediction, this genome contained 17,593 protein‐coding genes and 56.16% repetitive sequences. Phylogenetic analyses indicated that D. punctatus diverged from the common ancestor of Hyphantria cunea, Spodoptera litura and Thaumetopoea pityocampa ~ 108.91 million years ago. Many gene families that were expanded in the D. punctatus genome were significantly enriched for the xenobiotic biodegradation system, especially the cytochrome P450 gene family. This high‐quality, chromosome‐level reference genome will be a valuable resource for understanding mechanisms of D. punctatus outbreak and host resistance adaption. Because this is the first Lasiocampidae insect genome to be sequenced, it also will serve as a reference for further comparative genomics.     

Improving Nelumbo nucifera genome assemblies using high‐resolution genetic maps and BioNano genome mapping reveals ancient chromosome rearrangements

Genetic and physical maps are powerful tools to anchor fragmented draft genome assemblies generated from next‐generation sequencing. Currently, two draft assemblies of Nelumbo nucifera, the genomes of ‘China Antique’ and ‘Chinese Tai‐zi’, have been released. However, there is presently no information on how the sequences are assembled into chromosomes in N. nucifera. The lack of physical maps and inadequate resolution of available genetic maps hindered the assembly of N. nucifera chromosomes. Here, a linkage map of N. nucifera containing 2371 bin markers [217 577 single nucleotide polymorphisms (SNPs)] was constructed using restriction‐site associated DNA sequencing data of 181 F₂ individuals and validated by adding 197 simple sequence repeat (SSR) markers. Additionally, a BioNano optical map covering 86.20% of the ‘Chinese Tai‐zi’ genome was constructed. The draft assembly of ‘Chinese Tai‐zi’ was improved based on the BioNano optical map, showing an increase of the scaffold N50 from 0.989 to 1.48 Mb. Using a combination of multiple maps, 97.9% of the scaffolds in the ‘Chinese Tai‐zi’ draft assembly and 97.6% of the scaffolds in the ‘China Antique’ draft assembly were anchored into pseudo‐chromosomes, and the centromere regions along the pseudo‐chromosomes were identified. An evolutionary scenario was proposed to reach the modern N. nucifera karyotype from the seven ancestral eudicot chromosomes. The present study provides the highest‐resolution linkage map, the optical map and chromosome level genome assemblies for N. nucifera, which are valuable for the breeding and cultivation of N. nucifera and future studies of comparative and evolutionary genomics in angiosperms.     

De novo assembly of a wild pear (Pyrus betuleafolia) genome

China is the origin and evolutionary centre of Oriental pears. Pyrus betuleafolia is a wild species native to China and distributed in the northern region, and it is widely used as rootstock. Here, we report the de novo assembly of the genome of P. betuleafolia‐Shanxi Duli using an integrated strategy that combines PacBio sequencing, BioNano mapping and chromosome conformation capture (Hi‐C) sequencing. The genome assembly size was 532.7 Mb, with a contig N50 of 1.57 Mb. A total of 59 552 protein‐coding genes and 247.4 Mb of repetitive sequences were annotated for this genome. The expansion genes in P. betuleafolia were significantly enriched in secondary metabolism, which may account for the organism's considerable environmental adaptability. An alignment analysis of orthologous genes showed that fruit size, sugar metabolism and transport, and photosynthetic efficiency were positively selected in Oriental pear during domestication. A total of 573 nucleotide‐binding site (NBS)‐type resistance gene analogues (RGAs) were identified in the P. betuleafolia genome, 150 of which are TIR‐NBS‐LRR (TNL)‐type genes, which represented the greatest number of TNL‐type genes among the published Rosaceae genomes and explained the strong disease resistance of this wild species. The study of flavour metabolism‐related genes showed that the anthocyanidin reductase (ANR) metabolic pathway affected the astringency of pear fruit and that sorbitol transporter (SOT) transmembrane transport may be the main factor affecting the accumulation of soluble organic matter. This high‐quality P. betuleafolia genome provides a valuable resource for the utilization of wild pear in fundamental pear studies and breeding.     

Chromosomal‐level genomes of three rice planthoppers provide new insights into sex chromosome evolution

The brown planthopper Nilaparvata lugens, white‐backed planthopper Sogatella furcifera, and small brown planthopper Laodelphax striatellus are three major insect pests of rice. They are genetically close; however, they differ in several ecological traits such as host range, migration capacity, and in their sex chromosomes. Though the draft genome of these three planthoppers have been previously released, the quality of genome assemblies need to be improved. The absence of chromosome‐level genome resources has hindered in‐depth research of these three species. Here, we performed a de novo genome assembly for N. lugens to increase its genome assembly quality with PacBio and Illumina platforms, increasing the contig N50 to 589.46 Kb. Then, with the new N. lugens genome and previously reported S. furcifera and L. striatellus genome assemblies, we generated chromosome‐level scaffold assemblies of these three planthopper species using HiC scaffolding technique. The scaffold N50s significantly increased to 77.63 Mb, 43.36 Mb and 29.24 Mb for N. lugens, S. furcifera and L. striatellus, respectively. To identify sex chromosomes of these three planthopper species, we carried out genome re‐sequencing of males and females and successfully determined the X and Y chromosomes for N. lugens, and X chromosome for S. furcifera and L. striatellus. The gene content of the sex chromosomes showed high diversity among these three planthoppers suggesting the rapid evolution of sex‐linked genes, and all chromosomes showed high synteny. The chromosome‐level genome assemblies of three planthoppers would provide a valuable resource for a broad range of future research in molecular ecology, and subsequently benefits development of modern pest control strategies.     

A chromosome‐scale genome assembly of Antheraea pernyi (Saturniidae,Lepidoptera)

Antheraea pernyi is a semi‐domesticated lepidopteran insect species valuable to the silk industry, human health, and ecological tourism. Owing to its economic influence and developmental properties, it serves as an ideal model for investigating divergence of the Bombycoidea super family. However, studies on the karyotype evolution and functional genomics of A. pernyi are limited by scarce genomic resource. Here, we applied PacBio sequencing and chromosome structure capture technique to assemble the first high‐quality A. pernyi genome from a single male individual. The genome is 720.67 Mb long with 49 chromosomes and a 13.77‐Mb scaffold N50. Approximately 441.75 Mb, accounting for 60.74% of the genome, was identified as repeats. The genome comprises 21,431 protein‐coding genes, 85.22% of which were functionally annotated. Comparative genomics analysis suggested that A. pernyi diverged from its common ancestor with A. yamamai ~30.3 million years ago, and that chromosome fission contributed to the increased chromosome number. The genome assembled in this work will not only facilitate future research on A. pernyi and related species but also help to progress comparative genomics analyses in Lepidoptera.     

High quality genome of Erigeron breviscapus provides a reference for herbal plants in Asteraceae

Erigeron breviscapus is an important medicinal plant in Compositae and the first species to realize the whole process from the decoding of the draft genome sequence to scutellarin biosynthesis in yeast. However, the previous low‐quality genome assembly has hindered the optimization of candidate genes involved in scutellarin synthesis and the development of molecular‐assisted breeding based on the genome. Here, the E. breviscapus genome was updated using PacBio RSII sequencing data and Hi‐C data, and increased in size from 1.2 Gb to 1.43 Gb, with a scaffold N50 of 156.82 Mb and contig N50 of 140.95 kb, and a total of 43,514 protein‐coding genes were obtained and oriented onto nine pseudo‐chromosomes, thus becoming the third plant species assembled to chromosome level after sunflower and lettuce in Compositae. Fourteen genes with evidence for positive selection were identified and found to be related to leaf morphology, flowering and secondary metabolism. The number of genes in some gene families involved in flavonoid biosynthesis in E. breviscapus have been significantly expanded. In particular, additional candidate genes involved in scutellarin biosynthesis, such as flavonoid‐7‐O‐glucuronosyltransferase genes (F7GATs) were identified using updated genome. In addition, three candidate genes encoding indole‐3‐pyruvate monooxygenase YUCCA2 (YUC2), serine carboxypeptidase‐like 18 (SCPL18), and F‐box protein (FBP), respectively, were identified to be probably related to leaf development and flowering by resequencing 99 individuals. These results provided a substantial genetic basis for improving agronomic and quality traits of E. breviscapus, and provided a platform for improving other draft genome assemblies to chromosome‐level.     

Chromosome‐level genome assembly of Triplophysa tibetana,a fish adapted to the harsh high‐altitude environment of the Tibetan Plateau

Triplophysa is an endemic fish genus of the Tibetan Plateau in China. Triplophysa tibetana, which lives at a recorded altitude of ~4,000 m and plays an important role in the highland aquatic ecosystem, serves as an excellent model for investigating high‐altitude environmental adaptation. However, evolutionary and conservation studies of T. tibetana have been limited by scarce genomic resources for the genus Triplophysa. In the present study, we applied PacBio sequencing and the Hi‐C technique to assemble the T. tibetana genome. A 652‐Mb genome with 1,325 contigs with an N50 length of 3.1 Mb was obtained. The 1,137 contigs were further assembled into 25 chromosomes, representing 98.7% and 80.47% of all contigs at the base and sequence number level, respectively. Approximately 260 Mb of sequence, accounting for ~39.8% of the genome, was identified as repetitive elements. DNA transposons (16.3%), long interspersed nuclear elements (12.4%) and long terminal repeats (11.0%) were the most repetitive types. In total, 24,372 protein‐coding genes were predicted in the genome, and ~95% of the genes were functionally annotated via a search in public databases. Using whole genome sequence information, we found that T. tibetana diverged from its common ancestor with Danio rerio ~121.4 million years ago. The high‐quality genome assembled in this work not only provides a valuable genomic resource for future population and conservation studies of T. tibetana, but it also lays a solid foundation for further investigation into the mechanisms of environmental adaptation of endemic fishes in the Tibetan Plateau.     

The Chimonanthus salicifolius genome provides insight into magnoliid evolution and flavonoid biosynthesis

Chimonanthus salicifolius, a member of the Calycanthaceae of magnoliids, is one of the most famous medicinal plants in Eastern China. Here, we report a chromosome‐level genome assembly of C. salicifolius, comprising 820.1 Mb of genomic sequence with a contig N50 of 2.3 Mb and containing 36 651 annotated protein‐coding genes. Phylogenetic analyses revealed that magnoliids were sister to the eudicots. Two rounds of ancient whole‐genome duplication were inferred in the C. salicifolious genome. One is shared by Calycanthaceae after its divergence with Lauraceae, and the other is in the ancestry of Magnoliales and Laurales. Notably, long genes with > 20 kb in length were much more prevalent in the magnoliid genomes compared with other angiosperms, which could be caused by the length expansion of introns inserted by transposon elements. Homologous genes within the flavonoid pathway for C. salicifolius were identified, and correlation of the gene expression and the contents of flavonoid metabolites revealed potential critical genes involved in flavonoids biosynthesis. This study not only provides an additional whole‐genome sequence from the magnoliids, but also opens the door to functional genomic research and molecular breeding of C. salicifolius.     

A chromosome‐level genome assembly of the parasitoid wasp Pteromalus puparum

Parasitoid wasps represent a large proportion of hymenopteran species. They have complex evolutionary histories and are important biocontrol agents. To advance parasitoid research, a combination of Illumina short‐read, PacBio long‐read and Hi‐C scaffolding technologies was used to develop a high‐quality chromosome‐level genome assembly for Pteromalus puparum, which is an important pupal endoparasitoid of caterpillar pests. The chromosome‐level assembly has aided in studies of venom and detoxification genes. The assembled genome size is 338 Mb with a contig N50 of 38.7 kb and a scaffold N50 of 1.16 Mb. Hi‐C analysis assembled scaffolds onto five chromosomes and raised the scaffold N50 to 65.8 Mb, with more than 96% of assembled bases located on chromosomes. Gene annotation was assisted by RNA sequencing for the two sexes and four different life stages. Analysis detected 98% of the BUSCO (Benchmarking Universal Single‐Copy Orthologs) gene set, supporting a high‐quality assembly and annotation. In total, 40.1% (135.6 Mb) of the assembly is composed of repetitive sequences, and 14,946 protein‐coding genes were identified. Although venom genes play important roles in parasitoid biology, their spatial distribution on chromosomes was poorly understood. Mapping has revealed venom gene tandem arrays for serine proteases, pancreatic lipase‐related proteins and kynurenine–oxoglutarate transaminases, which have amplified in the P. puparum lineage after divergence from its common ancestor with Nasonia vitripennis. In addition, there is a large expansion of P450 genes in P. puparum. These examples illustrate how chromosome‐level genome assembly can provide a valuable resource for molecular, evolutionary and biocontrol studies of parasitoid wasps.     

Variations in the Bioactive Compounds Composition and Biological Activities of Loofah (Luffa cylindrica) Fruits in Relation to Maturation Stages

The present work aimed to determine the antioxidant and antiproliferative potential of Luffa cylindrica fruits collected at two different maturation stages and to identify and compare their functional components composition. The MeOH extracts of L. cylindrica fruits harvested at 60 – 65 days after seeding (S1) and 85 – 90 days after seeding (S2) were investigated for their antioxidant activity using various assays. Furthermore, the antiproliferative activity of the extracts against HeLa human cervical cancer cells was explored with xCELLigence real time cell analyzer, while the effect of the samples on the membrane integrity of the same cell line was assessed using LDH cytotoxicity leakage assay. Ultimately, the phytochemicals were analyzed using GC/MS and HPLC/TOF‐MS. The S1 sample had higher contents and more diversity in the phenolic compounds composition than S2. Furthermore, the S1 extract showed the highest antioxidant and antiproliferative activity, while the S2 extract had higher cytotoxicity towards HeLa cells. The findings revealed that the time of harvest has a big impact on the phytochemicals content and activity and that harvesting L. cylindrica at an early stage before the beginning of the development of the cellulose fibrous system is recommended for a rich phytochemical composition and efficient antioxidant and antiproliferative activities.     

Arrangement and size distribution of repeat and single copy DNA sequences in four species ofCucurbitaceae

DNA sequence organization patterns have been studied in fourCucurbitaceae plant species, namely,Luffa cylindrica (sponge gourd),L. acutangula (ridge gourd),Benincasa hispida (ash gourd) andCoccinia indica (ivy gourd). Extensive interspersion of repeat and single copy sequences has been observed in sponge gourd and ridge gourd. In ash gourd and ivy gourd, however, there is a limited interspersion of these sequences and a large portion of the single copy DNA remains uninterspersed. The interspersed repetitive sequences are composed of a major class (75–80%) of short repeats (300 base pairs long) and a minor class (15–20%) of long repeats (2 000–4 000 base pairs) in all the four species. The average length of single copy sequences dispersed among repeats is 1 800–2 900 base pairs. In spite of these gross similarities in the genome organization in the four species, the fraction of repeats and single copy sequences involved in short and long period interspersion patterns, and fraction of single copy sequences remaining uninterrupted by repeats are vastly different. The probable implications of these differences with respect to speciation events and rates of genome evolution are discussed.Molecular Analysis ofCucurbitaceae Genomes, III. — NCL Communication No.: 3595.