Isolation, characterization, and nucleotide sequence of IS1202, an insertion sequence of Streptococcus pneumoniae.

A comparative hybridization protocol was used to isolate a small segment of DNA present in the Streptococcus pneumoniae type 19F strain SSZ but absent from strain Rx1, a nonencapsulated derivative of the type 2 strain D39. This segment of DNA is a 1,747-bp insertion sequence, designated IS1202, flanked by 23-bp imperfect inverted repeats and containing a single open reading frame sufficient to encode a 54.4-kDa polypeptide. A 27-bp target sequence is duplicated at either end of the element. IS1202 is not related to any of the currently known insertion elements and is the first reported for S. pneumoniae. Although found predominantly in type 19F strains in up to five copies, it has also been shown to be present in the chromosomes of pneumococci belonging to other serotypes. One of the four IS1202 copies in the encapsulated strain SSZ is located 1,009 bp downstream of the dexB gene, and transformation studies reveal that it is also closely linked to the type 19F capsular polysaccharide synthesis (cps) locus.     

Identification and characterization of IS1112 and IS1113 insertion element sequences in Xanthomonas oryzae pv. oryzae.

Two new insertion sequences (IS1112 and IS1113) were identified in the genome of Xanthomonas oryzae pv. oryzae, the causal agent of bacterial blight of rice. Three copies of IS1112 were trapped, one containing 1052-bp and the other two with 1055-bp. They all have 25-bp imperfect inverted repeats with a 3-bp duplication at the site of insertion. They contain an open reading frame (ORF) of 317 and 318 amino acid residues, respectively. IS1113 is 1306-bp, contains 25-bp imperfect terminal inverted repeats, and is flanked by a 9-bp direct repeat at the site of insertion. It contains an ORF of 395 amino acid residues.     

The inverted repeats of IS<Emphasis Type="Italic">1384</Emphasis>, a newly described insertion sequence from<Emphasis Type="Italic"> Pseudomonas putida</Emphasis> strain H,represent the specific target for integration of IS<Emphasis Type="Italic">1383</Emphasis>

Analysis of a region on plasmid pPGH1 from Pseudomonas putida strain H that is flanked by two copies of IS1383 has revealed an additional element with the typical features of a bacterial insertion sequence. This new IS element, designated IS1384, contains a single ORF of 972 bp, and is flanked by 9-bp inverted repeats. Based on sequence homology and structural characteristics of the putative transposase it encodes, IS1384 belongs to the IS5 subgroup of the IS5 family. Two copies of IS1384 are present on plasmid pPGH1, whereas none could be detected on the chromosome of P. putida strain H. Sequence analysis revealed the presence of two truncated copies of IS1384 on the second plasmid in this strain, pPGH2. The inverted repeats of all IS1384 copies (including the truncated ones) are interrupted by the integration of an IS1383 element. All integrations were found to be site- and orientation-specific. PCR studies and sequence data indicate that IS1383 can form a circular intermediate on excision. In the circular form, the previously described 13-bp inverted repeats of IS1383 are separated by 10 bp that are identical to the 5-bp motif that flanks each side of the element when it is integrated in its target. We provide evidence that these additional nucleotides, although not of inverted symmetry, represent an essential part of the inverted repeats. Furthermore, the data indicate that IS1383 integrated into the inverted repeats of IS1384 by a site-specific recombination rather than a site-specific insertion event.     

Characterization and distribution of IS8301 in the radioresistant bacterium Deinococcus radiodurans

The insertion sequence element IS8301 isolated from the radiation resistant bacterium Deinococcus radiodurans strain KD8301 was characterized. IS8301 is comprised of 1,736-bp, lacks terminal inverted repeats and does not duplicate target DNA upon its insertion. The amino acid sequence homology of two open reading frames encoded in IS8301 indicates that this insertion sequence element belongs to the IS200/IS605 group. There were seven loci completely identical with the IS8301 sequence in the published D. radiodurans R(1) genome sequence. The genome distribution profiles of IS8301 in strain KD8301 as well as in the three different laboratory isolates (KR(1), MR(1), and R(1)) of wild-type D. radiodurans were investigated using genomic hybridization analysis. At least 21 strong hybridization signals were detected in strain KD8301 while only one hybridization signal was detected in strain KR(1), the parent strain of KD8301. In strain MR1, a different wild-type isolate, six strong hybridization signals were detected. In spite of the identification of seven copies of IS8301 in the published D. radiodurans R(1) genome sequence, only one hybridization signal was detected in strain R(1) purchased from American Type Culture Collection. Using inverse PCR and sequencing analyses, total 13 different insertion loci of IS8301 in the D. radiodurans genome were identified. Sequence comparison of the flanking region of insertion sites indicated that the sequence 5'-TTGAT-3' preceded the left end of IS8301 in all cases.     

Characterization of IS1515, a Functional Insertion Sequence in Streptococcus pneumoniae

We describe the characterization of a new insertion sequence, IS1515, identified in the genome of Streptococcus pneumoniae I41R, an unencapsulated mutant isolated many years ago (R. Austrian, H. P. Bernheimer, E. E. B. Smith, and G. T. Mills, J. Exp. Med. 110:585–602, 1959). A copy of this element located in the cap1E_I41R gene was sequenced. The 871-bp-long IS1515 element possesses 12-bp perfect inverted repeats and generates a 3-bp target duplication upon insertion. The IS encodes a protein of 271 amino acid residues similar to the putative transposases of other insertion sequences, namely IS1381 from S. pneumoniae, ISL2 from Lactobacillus helveticus, IS702 from the cyanobacterium Calothrix sp. strain PCC 7601, and IS112 from Streptomyces albus G. IS1515 appears to be present in the genome of most type 1 pneumococci in a maximum of 13 copies, although it has also been found in the chromosome of pneumococcal isolates belonging to other serotypes. We have found that the unencapsulated phenotype of strain I41R is the result of both the presence of an IS1515 copy and a frameshift mutation in the cap1E_I41R gene. Precise excision of the IS was observed in the type 1 encapsulated transformants isolated in experiments designed to repair the frameshift. These results reveal that IS1515 behaves quite differently from other previously described pneumococcal insertion sequences. Several copies of IS1515 were also able to excise and move to another locations in the chromosome of S. pneumoniae. To our knowledge, this is the first report of a functional IS in pneumococcus.     

Sequence and distribution of IS866, a novel T region-associated insertion sequence from Agrobacterium tumefaciens

We have identified a new insertion sequence, IS866, located in the auxin synthesis gene TA iaaH of Tm4, a wide host range biotype III octopine/cucumopine type Agrobacterium tumefaciens strain with two T regions on its tumor-inducing (Ti) plasmid, TA, and TB. IS866 is 2716 bp long, has inverted repeats of 27 bp with three mismatches, and generates 8-bp direct repeats upon integration. In addition to IS866, pTiTm4 carries two copies of a related element, IS867, associated with TA and TB, respectively. A systematic study of 92 virulent Agrobacterium strains has shown that among the three biotypes all octopine/cucumopine and vitopine biotype III isolates contain IS866-like elements. The various octopine/cucumopine Ti plasmids always carry IS866 and IS867 at the same position as in pTiTm4. The chromosomes of the bacteria which contain these Ti plasmids also carry IS866 and IS867 copies but in varying numbers and locations.     

Characterization of insertion sequence IS892 and related elements from the cyanobacterium Anabaena sp. strain PCC 7120.

IS892, one of the several insertion sequence (IS) elements discovered in Anabaena sp. strain PCC 7120 (Y. Cai and C. P. Wolk, J. Bacteriol. 172:3138-3145, 1990), is 1,675 bp with 24-bp near-perfect inverted terminal repeats and has two open reading frames (ORFs) that could code for proteins of 233 and 137 amino acids. Upon insertion into target sites, this IS generates an 8-bp directly repeated target duplication. A 32-bp sequence in the region between ORF1 and ORF2 is similar to the sequence of the inverted termini. Similar inverted repeats are found within each of those three segments, and the sequences of these repeats bear some similarity to the 11-bp direct repeats flanking the 11-kb insertion interrupting the nifD gene of this strain (J. W. Golden, S. J. Robinson, and R. Haselkorn, Nature [London] 314:419-423, 1985). A sequence similar to that of a binding site for the Escherichia coli integration host factor is found about 120 bp from the left end of IS892. Partial nucleotide sequences of active IS elements IS892N and IS892T, members of the IS892 family from the same Anabaena strain, were shown to be very similar to the sequence of IS892.     

ISZm1068: an IS5-like insertion element from Zymomonas mobilis

A new insertion sequence, designated ISZm1068, was isolated from Zymomonas mobilis strain CP4. This element consists of 1,068 bp and contains one major ORF which shows similarities both at the nucleotide and at the amino acid sequence level with the corresponding ORFs encoding the transposases of many IS5 family elements, in particular the IS1031 group. Moreover, the Z. mobilis ORF shares the conserved N2, N3 and C1 signature motifs of the IS4 and IS5 families. Six out of seven Z. mobilis wild-type strains were shown by hybridisation to contain a single copy of the ISZm1068 element. Nucleotide sequences of the insertion elements from these strains exhibited extremely high levels of identity, varying from 94.25 to 99.25%. ISZm1068 was shown to be active in Escherichia coli cells and led to plasmid replicon fusions within the host cell. Sequence analysis of rare cointegration and resolution derivatives suggests that ISZm1068 has putative imperfect inverted repeats at its extremities of 18 bp (IR-right) and 14 bp (IR-left), and that a 3-bp (5'-TCA-3') target sequence is duplicated upon insertion.     

Isolation of a new insertion sequence, IS13655, and its application to Corynebacterium glutamicum genome mutagenesis

A new functional Corynebacterium glutamicum insertion sequence (IS) element, IS13655, was isolated using a suicide vector. The IS element was 1,293 bp in size and contained 26-bp imperfect inverted repeats (IRs) and 3-bp target site duplication as direct repeats (DRs). IS13655 harbored two ORFs with high similarity to the transposase of IS1206, an IS3 family element. IS13655 revealed relatively high transposition efficiency, with low target site selectivity along the Corynebacterium glutamicum R genome, making it a potentially useful genetic engineering tool.     

Unusual organization associated to a tandem of IS231 may yield two peculiar cloverleaf secondary structures.

A 5.7-kb EcoRI fragment was cloned from plasmid DNA of Bacillus thuringiensis strain M15. It contains two insertion sequences (IS), IS231M2 and -M1 in the 5'-3' order, arranged in tandem, in same orientation, separated by a 540-bp region. The primary structure is typical of a composite transposon, here of 3847 bp in length, for which the name Tn231M is proposed. Each IS is delimited by 18-bp inverted repeats (IR), and flanked by 11-bp direct repeats (DR). Both IS share 99.3% nucleotide identities. IS231M1 has a single open reading frame (ORF) which encodes a putative 477-amino-acid transposase. IS231M2 has two smaller ORFs: ORF1 and ORF2, which could code for polypeptides of 329 and 118 amino acids in length, respectively. Further analysis reveals that the regions upstream of IS231M2, and downstream of -M1, and the 540-bp region, contain additional pairs of IR and DR. Interestingly, potential annealing between all pairs of IR and DR could generate two unusual cloverleaf secondary structures.     

A new insertion sequence, ISCb1, from Clostridium beijernickii NCIMB 8052

The NCIMB 8052 strain of Clostridium beijerinckii contains nine copies of a novel insertion sequence, ISCb1, belonging to the IS4 family. The 1764 bp element has 18 bp inverted repeats at its extremities, and generates 11 bp target repeats upon insertion. It contains a 1365 bp ORF whose predicted product (455 amino acids) resembles bacterial transposases. The highly conserved DD(35)E motif is present, as are signatures characteristic of the N3 and C1 domains of bacterial transposases. Codon usage of the ORF is somewhat different from that of other C. beijerinckii genes, suggesting that ISCb1 may have been acquired from another organism by horizontal gene transfer in the evolutionary past. One ISCb1 copy lies close to the site of insertion of Tn 1545 in a mutant strain, C10, which shows a reduced tendency to degenerate (i.e. loss of the potential to form solvents) compared with the wild type. In the C10 strain, the characteristic pattern of DNA fragments detected by an IS-specific probe was altered, but this was due to the Tn1545 insertion itself, rather than an ISCb1-mediated genome re-arrangement. There is currently no evidence that the element is involved in strain degeneration, since 12 independently isolated spontaneous mutants that had lost the ability to form solvents had the same ISCb1 profile as that of the wild type strain. The element is apparently restricted to a series of closely related solvent-forming clostridia.     

Identification of a second endogenous Porphyromonas gingivalis insertion element.

In this study a second endogenous Porphyromonas gingivalis insertion element (IS element) that is capable of transposition within P. gingivalis was identified. Nucleotide sequence analysis of the Tn4351 insertion site in a P. gingivalis Tn4351-generated transconjugant showed that a complete copy of the previously unidentified IS element, designated PGIS2, had inserted into IS4351R in Tn4351. PGIS2 is 1,207 bp in length with 19-bp imperfect terminal inverted repeats, and insertion resulted in a duplicated 10-bp target sequence. Results of Southern hybridization of chromosomal DNA isolated from several P. gingivalis strains with a PGIS2-specific probe demonstrated that the number of copies of PGIS2 per genome varies among different P. gingivalis strains. Computer analysis of the putative polypeptide encoded by PGIS2 revealed strong homologies to the products encoded by IS1358 from Vibrio cholerae, ISAS1 from Aeromonas salmonicida, and H-rpt in Escherichia coli K-12.     

A new insertion sequence, IS231M, in an autoagglutinable isolate of Bacillus thuringiensis

An insertion sequence was isolated from an autoagglutinable strain of Bacillus thuringiensis. Analysis of its DNA sequence revealed high homology to the IS231 family. The name IS231M is proposed for this new insertion sequence. IS231M is 1652 bp long and is delimited by two imperfect 20-bp inverted repeat sequences with two mismatches, which are flanked by two perfect 11-bp direct repeats (DRs). The region upstream of the open reading frame, presumed to be able to form a stable hairpin structure, is particularly well conserved in IS231M. Based on primary nucleotide sequences, IS231M is most homologous to IS231F and IS231G and most distant from IS231V and IS231W. However, as opposed to the single transposase A ORF found in IS231A, -B, -C, -D, -F, and -G, IS231M has two overlapping open reading frames, ORF1 and ORF2, that could code for polypeptides of 334 and 143 amino acids, respectively. Whether IS231M is a functional transposable element remains to be determined.     

Trimethoprim resistance transposon Tn4003 from Staphylococcus aureus encodes genes for a dihydrofolate reductase and thymidylate synthetase flanked by three copies of IS257

Trimethoprim resistance mediated by the Staphylococcus aureus multi-resistance plasmid pSK1 is encoded by a structure with characteristics of a composite transposon which we have designated Tn4003. Nucleotide sequence analysis of Tn4003 revealed it to be 4717 bp in length and to contain three copies of the insertion element IS257 (789-790 bp), the outside two of which are flanked by directly repeated 8-bp target sequences. IS257 has imperfect terminal inverted repeats of 27-28 bp and encodes for a putative transposase with two potential alpha-helix-turn-alpha-helix DNA recognition motifs. IS257 shares sequence similarities with members of the IS15 family of insertion sequences from Gram-negative bacteria and with ISS1 from Streptococcus lactis. The central region of the transposon contains the dfrA gene that specifies the S1 dihydrofolate reductase (DHFR) responsible for trimethoprim resistance. The S1 enzyme shows sequence homology with type I and V trimethoprim-resistant DHFRs from Gram-negative bacteria and with chromosomally encoded DHFRs from Gram-positive and Gram-negative bacteria. 5' to dfrA is a thymidylate synthetase gene, designated thyE.     

Characterisation of IS153, an IS3-family insertion sequence isolated from Lactobacillus sanfranciscensis and its use for strain differentiation

An insertion sequence has been identified in the genome of Lactobacillus sanfranciscensis DSM 20451T as segment of 1351 nucleotides containing 37-bp imperfect terminal inverted repeats. The sequence of this element encodes two out of phase, overlapping open reading frames, orfA and orfB, from which three putative proteins are produced. OrfAB is a transframe protein produced by -1 translational frame shifting between orf A and orf B that is presumed to be the transposase. The large orfAB of this element encodes a 342 amino acid protein that displays similarities with transposases encoded by bacterial insertion sequences belonging to the IS3 family. In L. sanfranciscensis type strain DSM 20451T multiple truncated IS elements were identified. Inverse PCR was used to analyze target sites of four of these elements, but except of their highly AT rich character not any sequence specificity was identified so far. Moreover, no flanking direct repeats were identified. Multiple copies of IS153 were detected by hybridization in other strains of L. sanfranciscensis. Resulting hybridization patterns were shown to differentiate between organisms at strain level rather than a probe targeted against the 16S rDNA. With a PCR based approach IS153 or highly similar sequences were detected in L. acidophilus, L. casei, L. malefermentans, L. plantarum, L. hilgardii, L. collinoides L. farciminis L. sakei and L. salivarius, L. reuteri as well as in Enterococcus faecium, Pediococcus acidilactici and P. pentosaceus.     

A novel transposon-like repeat interrupted by an LTR element occurs in a cluster of B1 repeats in the mouse c-mos locus.

The mouse genomic locus containing the oncogene c-mos was analyzed for repetitive DNA sequences. We found a single B1 repeat 10 kb upstream and three B1 repeats 0.6 kb, 2.7 kb, and 5.4 kb, respectively, downstream from c-mos. The B1 repeat closest to c-mos contains an internal 7-bp duplication and a 18-bp insertion. Localized between the last two B1 repeats is a copy of a novel mouse repeat. Sequence comparison of three copies of this novel repeat family shows that they a) contain a conserved BglII site, b) are approximately 420 bp long, c) possess internal 50-bp polypurine tracts, and d) have structural characteristics of transposable elements. They are present in about 1500 copies per haploid genome in the mouse, but are not detectable in DNA of other mammals. The BglII repeat downstream from c-mos is interrupted by a single 632-bp LTR element. We estimate that approximately 1200 copies of this element are present per haploid genome in BALB/c mice. It shares sequence homology in the R-U5 region with an LTR element found in 129/J mice.     

IS1549 from Mycobacterium smegmatis Forms Long Direct Repeats upon Insertion

A new insertion element, IS1549, was identified serendipitously from Mycobacterium smegmatis LR222 during experiments using a vector designed to detect the excision of IS6110 from between the promoter region and open reading frame (ORF) of an aminoglycoside phosphotransferase gene. Six of the kanamycin-resistant isolates had a previously unidentified insertion element upstream of the ORF of the aph gene. The 1,634-bp sequence contained a single ORF of 504 amino acids with 85% G+C content in the third codon position. The putative protein sequence showed a distant relationship to the transposase of IS231, which is a member of the IS4 family of insertion elements. IS1549 contains 11-bp terminal inverted repeats and is characterized by the formation of unusually long and variable-length (71- to 246-bp) direct repeats of the target DNA during transposition. Southern blot analysis revealed that five copies of IS1549 are present in LR222, but not all M. smegmatis strains carry this element. Only strains with a 65-kDa antigen gene with a PCR-restriction fragment length polymorphism type identical to that of M. smegmatis 607 contain IS1549. None of 13 other species of Mycobacterium tested by PCR with two sets of primers specific for IS1549 were positive for the expected amplified product.     

ISPst9, an ISL3-like insertion sequence from Pseudomonas stutzeri AN10 involved in catabolic gene inactivation

A novel insertion sequence (IS), ISPst9, from Pseudomonas stutzeri AN10 was cloned and characterized. ISPst9 is a typical bacterial IS, consisting of a 2472-bp element flanked by 24-bp perfect inverted repeats that generates 8-bp AT-rich target duplications upon insertion. The sequence also contains a gene that encodes an active transposase (TnpA) with significant amino acid identity to members of the ISL3 family. Southern blot analysis of digested genomic DNA of strain AN10 and its 4-chlorosalicylate-degrading derivative strain AN142 demonstrated that native ISPst9 transposes in multiple copies, with one of them responsible for the nahH insertional inactivation observed in strain AN142. Precise excision of ISPst9 yielded NahH+ revertants of AN142 at high frequencies (up to 10-6). In vivo transposition, mainly in multiple copies, of an ISPst9 derivative containing a KmR cassette cloned into a suicide vector was also demonstrated. Hybridization experiments carried out with different strains of P. stutzeri and with 292 phylogenetically distinct environmental isolates suggested that the presence of an ISPst9-like IS occurs in diverse bacteria together with the presence of aromatic hydrocarbon-degrading determinants.     

Activation and inactivation of Pseudomonas stutzeri methylbenzene catabolism pathways mediated by a transposable element

The arrangement of the genes involved in o-xylene, m-xylene, and p-xylene catabolism was investigated in three Pseudomonas stutzeri strains: the wild-type strain OX1, which is able to grow on o-xylene but not on the meta and para isomers; the mutant M1, which grows on m-xylene and p-xylene but is unable to utilize the ortho isomer; and the revertant R1, which can utilize all the three isomers of xylene. A 3-kb insertion sequence (IS) termed ISPs1, which inactivates the m-xylene and p-xylene catabolic pathway in P. stutzeri OX1 and the o-xylene catabolic genes in P. stutzeri M1, was detected. No IS was detected in the corresponding catabolic regions of the P. stutzeri R1 genome. ISPs1 is present in several copies in the genomes of the three strains. It is flanked by 24-bp imperfect inverted repeats, causes the direct duplication of 8 bp in the target DNA, and seems to be related to the ISL3 family.