Overproduction of carotenoids in Thermus thermophilus

Phytoene synthase encoded by the crtB gene is one of the rate-limiting enzymes for carotenoid production in Thermus thermophilus. We introduced a multicopy recombinant plasmid, pCOP1, in which the Thermus crtB gene was cloned, into carotenoid overproducing mutants of T. thermophilus. The overproducing mutants carrying a pCOP1 produced about twenty times as much carotenoids as the parental strain did.     

T vector bearing KillerRed protein marker for red/white cloning screening

As a novel selection marker for DNA cloning, the genetically encoded photosensitizer KillerRed was used to achieve red/white cloning screening within the pZK18T T-vector system. KillerRed functioned without cofactors, inducers, or substrates. KillerRed-based red/white cloning screening was reliable in that bacteria containing DNA inserts that disrupt functional KillerRed expression form white colonies or red colonies as backgrounds. KillerRed simplifies assembly of customized vector and recombinant screening procedures. No special host or culture medium is required to amplify and prepare the vector in larger quantities. It makes high-throughput general-purpose cloning screening simpler, less expensive, and more effective.     

An Alternative Method to Facilitate cDNA Cloning for Expression Studies in Mammalian Cells by Introducing Positive Blue White Selection in Vaccinia Topoisomerase I-Mediated Recombination

One of the most basic techniques in biomedical research is cDNA cloning for expression studies in mammalian cells. Vaccinia topoisomerase I-mediated cloning (TOPO cloning by Invitrogen) allows fast and efficient recombination of PCR-amplified DNAs. Among TOPO vectors, a pcDNA3.1 directional cloning vector is particularly convenient, since it can be used for expression analysis immediately after cloning. However, I found that the cloning efficiency was reduced when RT-PCR products were used as inserts (about one-quarter). Since TOPO vectors accept any PCR products, contaminating fragments in the insert DNA create negative clones. Therefore, I designed a new mammalian expression vector enabling positive blue white selection in Vaccinia topoisomerase I–mediated cloning. The method utilized a short nontoxic LacZα peptide as a linker for GFP fusion. When cDNAs were properly inserted into the vector, minimal expression of the fusion proteins in E. coli (harboring lacZΔM15) resulted in formation of blue colonies on X-gal plates. This method improved both cloning efficiency (75%) and directional cloning (99%) by distinguishing some of the negative clones having non-cording sequences, since these inserts often disturbed translation of lacZα. Recombinant plasmids were directly applied to expression studies using GFP as a reporter. Utilization of the P2A peptide allowed for separate expression of GFP. In addition, the preparation of Vaccinia topoisomerase I-linked vectors was streamlined, which consisted of successive enzymatic reactions with a single precipitation step, completing in 3 hr. The arrangement of unique restriction sites enabled further modification of vector components for specific applications. This system provides an alternative method for cDNA cloning and expression in mammalian cells.     

Development of a novel T-vector supporting efficient green-white screening

T-vectors play an important role in cloning of polymerase chain reaction products. In the present study, a novel pUEG-T vector was developed using enhanced green fluorescent protein (EGFP) as an indicator. To improve EGFP-based green-white screening, the lipoprotein mutant promoter, a strong constitutive promoter, was utilized to control the expression of egfp gene. Two other efficient expression elements, the ColE1 replication origin of pUC18 and the expression cassette of pET-28a, were also integrated into pUEG-T vector. Expression analysis demonstrated the efficient accumulation of active EGFPs in Escherichia coli DH5α cells carrying the T-vector precursor pUEG. In T-A cloning using pUEG-T vector, white colonies containing foreign DNA and green colonies having no insertion could be handily distinguished under normal white light, without any chemical inducer or chromogenic substrate. Furthermore, no false positive was observed in any of the tested white colonies. This proves that pUEG-T is an inexpensive, convenient and efficient T-vector.     

A series of novel directional cloning and expression vectors for blunt-end ligation of PCR products

Novel directional cloning and expression vectors were developed for blunt-end ligation of PCR products that are suitable for high-throughput cloning and simplifying the screening procedure. The PCR products, without further processing, are cloned into vectors digested with SchI and, following transformation, the desired recombinants give typical blue colonies on selectable plates. The principle of this selection strategy is that the construction also generates a full-length ideal lacO gene. To the best of our knowledge, this is the first time that this lacO reconstruction strategy has been applied in the selection of recombinants.     

Two versatile shuttle vectors for Thermus thermophilus-Escherichia coli containing multiple cloning sites, lacZα gene and kanamycin or hygromycin resistance marker

Two versatile shuttle vectors for Thermus thermophilus and Escherichia coli were developed on the basis of the T. thermophilus cryptic plasmid pTT8 and E. coli vector pUC13. These shuttle vectors, pTRK1T and pTRH1T, carry a gene encoding a protein homologous to replication protein derived from pTT8, a replicon for E. coli, new multiple cloning sites and a lacZα gene from E. coli vector pUC13, and also have a gene encoding a thermostable protein that confers resistance to kanamycin or hygromycin, which can be used as a selection marker in T. thermophilus. These shuttle vectors are useful to develop enzymes and proteins of biotechnological interest. We also constructed a plasmid, pUC13T, which carries the same multiple cloning sites of pTRK1T and pTRH1T. These vectors should facilitate cloning procedures both in E. coli and T. thermophilus.     

pGreen-S: A clone vector bearing absence of enhanced green fluorescent protein for screening recombinants

The bacterial cloning vector, pGreen-S, was constructed by inserting the enhanced green fluorescent protein (EGFP) gene at the XbaI restriction site of pUC18 plasmid. When expressed in Escherichia coli DH5α produced colonies that were an absinthe green color under daylight and strongly fluorescent green under longwave ultraviolet light. The pGreen-S vector was used to select for directional insert based on the loss of green fluorescence in recombinant colonies that was caused by the absence of EGFP. The EGFP reporter system differs from the conventional complementation of lacZ, making screening recombinants simpler, less expensive, and more effective.     

Isolation of β-globin-related genes from a human cosmid library

A human gene library was constructed using an improved cloning technique for cosmid vectors. Human placental DNA was partially digested with restriction endonuclease Mboi, size-fractionated and ligated to BamHI-cut and phosphatase-treated cosmid vector pJB8. After packaging in λ phage particles, the recombinant DNA was transduced into Escherichia coli 1400 or HB101 followed by selection on ampicillin for recombinant E. coli. 150000 recombinant-DNA-containing colonies were screened for the presence of the human β-globin related genes. Five recombinants were isolated containing the human β-globin locus and encompassing approx. 70 kb of human DNA.     

Development of a new host–vector system for colour selection of cloned DNA inserts using a newly designed β-galactosidase gene containing multiple cloning sites in Thermus thermophilus HB27

We constructed a new Thermus thermophilus cloning vector which enables the colour selection of cloned DNA inserts in the T. thermophilus HB27 host strain (β-gal⁻) on growth plates containing 3,4-cyclohexenoesculetin β-d-galactopyranoside (S-gal) in the medium. This vector harbors a modified β-galactosidase gene (TTP0042 of T. thermophilus HB27) with 12 unique restriction enzyme sites (Acc65I, AvrII, BlpI, BssHII, EcoRI, EcoRV, HindIII, NruI, SalI, SpeI, SphI and XbaI) as multiple cloning sites under the control of the T. thermophilus slpA promoter. This host–vector system facilitates cloning procedures in T. thermophilus HB27.

     

A two-host fosmid system for functional screening of (meta)genomic libraries from extreme thermophiles

A new cloning system is described, which allows the construction of large-insert fosmid libraries in Escherichia coli and the transfer of the recombinant libraries to the extreme thermophile Thermus thermophilus via natural transformation. Libraries are established in the thermophilic host by site-specific chromosomal insertion of the recombinant fosmids via single crossover or double crossover recombination at the T. thermophilus pyr locus. Comparative screening of a fosmid library constructed from genomic DNA from the thermophilic spirochaete, Spirochaeta thermophila, for clones expressing thermoactive xylanase activity revealed that 50% of the fosmids that conferred xylanase activity upon the corresponding T. thermophilus transformants did not give rise to xylanase-positive E. coli clones, indicating that significantly more S. thermophila genes are functionally expressed in T. thermophilus than in E. coli. The novel T. thermophilus host/vector system may be of value for the construction and functional screening of recombinant DNA libraries from individual thermophilic or extremely thermophilic organisms as well as from complex metagenomes isolated from thermophilic microbial communities.     

An advanced blue-white screening method for construction of shRNA expression vectors

Short hairpin RNA (shRNA) encoded within an expression vector is an effective tool for exploration of gene function in mammalian cells. Many of the current methods for constructing shRNA expression vectors require cumbersome and time-consuming procedures for identification of the desired recombinants. We have developed a highly efficient and less labor-intensive cloning method that allows the construction of shRNA expression vectors in one day and with minimal effort. This advanced blue-white screening technique was developed by combining the reconstitution of ideal lacO with TA cloning. The DNAs are simply ligated into the destination vectors and, following transformation, a desired recombinant event will give a typical blue colony. In addition, we have used this cloning method for the construction of targeting reporter expression vectors to measure the efficacy of the corresponding shRNA. We constructed 122 functional shRNA expression vectors and sequencing of the positive cloning vectors confirmed a high degree of accuracy. Only three short DNA primers are needed for constructing both shRNA and targeting reporter expression vectors. This advanced blue-white screening system is a powerful tool for the high-throughput assay of RNAi libraries.     

A novel prokaryotic vector for identification and selection of recombinants: Direct use of the vector for expression studies in <Emphasis Type="Italic">E. coli</Emphasis>

Background  

The selection of bacterial recombinants that harbour a desired insert, has been a key factor in molecular cloning and a series of screening procedures need to be performed for selection of clones carrying the genes of interest. The conventional cloning techniques are reported to have problems such as screening high number of colonies, generation of false positives, setting up of control ligation mix with vector alone etc.     

构建定向T载体用于基因克隆和表达

传统的T载体克隆方法需要烦琐的后续步骤来筛选和鉴定重组子,并且无法实现目的基因的定向克隆。为了克服这些问题,本研究在pET-23a(+)的基础上构建了定向T载体pETG,首先通过定点诱变消除pET-23a(+)上的两个BfuⅠ位点得到PET-23aM;设计一对引物在5端各引入一个BfuⅠ位点,下游引物紧邻BfuⅠ位点引入13 bp的部分LacO序列,用该引物从pHBM2002上扩增Prrn-gfp表达盒,插入PET-23aM的NdeⅠ和XhoⅠ位点,得到定向T载体pETG。PCR扩增的目的基因通过下游引物引入7 bp剩余的LacO序列,该基因片段与BfuⅠ酶切制备的定向T载体连接、转化大肠杆菌DH10β感受态细胞,通过补加了X-gal的平板筛选蓝色重组子。质粒酶切和PCR鉴定表明蓝色菌落全部为定向插入的重组子,重组效率100%,利用本方法成功地定向克隆了103个人类肝蛋白编码基因cDNA,克隆过程无需复杂的步骤筛选鉴定重组子。随机选择了其中的8个基因的克隆进行表达,结果显示8个克隆均在大肠杆菌中获得成功表达。该结果表明定向T载体构建成功,并且该载体非常适合基因的克隆和表达。     

A Potential Food-Grade Cloning Vector for Streptococcus thermophilus That Uses Cadmium Resistance as the Selectable Marker

A potential food-grade cloning vector, pND919, was constructed and transformed into S. thermophilus ST3-1, a plasmid-free strain. The vector contains DNAs from two different food-approved organisms, Streptococcus thermophilus and Lactococcus lactis. The 5.0-kb pND919 is a derivative of the cloning vector pND918 (9.3 kb) and was constructed by deletion of the 4.3-kb region of pND918 which contained DNA from non-food-approved organisms. pND919 carries a heterologous native cadmium resistance selectable marker from L. lactis M71 and expresses the Cd^r phenotype in S. thermophilus transformants. With the S. thermophilus replicon derived from the shuttle vector pND913, pND919 is able to replicate in the two S. thermophilus industrial strains tested, ST3-1 and ST4-1. Its relatively high retention rate in S. thermophilus further indicates its usefulness as a potential food-grade cloning vector. To our knowledge, this is the first report of a replicative potential food-grade vector for the industrially important organism S. thermophilus.     

Positive-selection and ligation-independent cloning vectors for large scale <Emphasis Type="Italic">in Planta</Emphasis> expression for plant functional genomics

Transient expression is an easy, rapid and powerful technique for producing proteins of interest in plants. Recombinational cloning is highly efficient but has disadvantages, including complicated, time consuming cloning procedures and expensive enzymes for large-scale gene cloning. To overcome these limitations, we developed new ligationindependent cloning (LIC) vectors derived from binary vectors including tobacco mosaic virus (pJL-TRBO), potato virus X (pGR106) and the pBI121 vector-based pMBP1. LIC vectors were modified to enable directional cloning of PCR products without restriction enzyme digestion or ligation reactions. In addition, the ccdB gene, which encodes a potent cell-killing protein, was introduced between the two LIC adapter sites in the pJL-LIC, pGR-LIC, and pMBP-LIC vectors for the efficient selection of recombinant clones. This new vector does not require restriction enzymes, alkaline phosphatase, or DNA ligase for cloning. To clone, the three LIC vectors are digested with SnaBI and treated with T4 DNA polymerase, which includes 3′ to 5′ exonuclease activity in the presence of only one dNTP (dGTP for the inserts and dCTP for the vector). To make recombinants, the vector plasmid and the insert PCR fragment were annealed at room temperature for 20 min prior to transformation into the host. Bacterial transformation was accomplished with 100% efficiency. To validate the new LIC vector systems, we were used to coexpressed the Phytophthora AVR and potato resistance (R) genes in N. benthamiana by infiltration of Agrobacterium. Coexpressed AVR and R genes in N. benthamiana induced the typical hypersensitive cell death resulting from in vivo interaction of the two proteins. These LIC vectors could be efficiently used for high-throughput cloning and laboratory-scale in planta expression. These vectors could provide a powerful tool for high-throughput transient expression assays for functional genomic studies in plants.     

Optimal Cloning of PCR Fragments by Homologous Recombination in Escherichia coli

PCR fragments and linear vectors containing overlapping ends are easily assembled into a propagative plasmid by homologous recombination in Escherichia coli. Although this gap-repair cloning approach is straightforward, its existence is virtually unknown to most molecular biologists. To popularize this method, we tested critical parameters influencing the efficiency of PCR fragments cloning into PCR-amplified vectors by homologous recombination in the widely used E. coli strain DH5α. We found that the number of positive colonies after transformation increases with the length of overlap between the PCR fragment and linear vector. For most practical purposes, a 20 bp identity already ensures high-cloning yields. With an insert to vector ratio of 2:1, higher colony forming numbers are obtained when the amount of vector is in the range of 100 to 250 ng. An undesirable cloning background of empty vectors can be minimized during vector PCR amplification by applying a reduced amount of plasmid template or by using primers in which the 5′ termini are separated by a large gap. DpnI digestion of the plasmid template after PCR is also effective to decrease the background of negative colonies. We tested these optimized cloning parameters during the assembly of five independent DNA constructs and obtained 94% positive clones out of 100 colonies probed. We further demonstrated the efficient and simultaneous cloning of two PCR fragments into a vector. These results support the idea that homologous recombination in E. coli might be one of the most effective methods for cloning one or two PCR fragments. For its simplicity and high efficiency, we believe that recombinational cloning in E. coli has a great potential to become a routine procedure in most molecular biology-oriented laboratories.     

pKILLIN: a versatile positive-selection cloning vector based on the toxicity of Killin in Escherichia coli

The invention of DNA cloning over 40 years ago marked the advent of molecular biology. The technique has now become a routine practice in any modern biomedical laboratory. Although positive-selection of recombinants in DNA cloning seems to be superior to blue/white selection based on the disruption of the lacZ gene, it is rarely practiced due to its high background, lack of multiple cloning sites, and inability to express the genes of interest or purify the protein products. Here we report the creation of a new positive-selection cloning vector dubbed pKILLIN, which overcomes all of the above pitfalls. The essence behind its high cloning efficiency is the extreme toxicity and small size of the toxic domain of killin, a recently discovered p53 target gene. Insertion inactivation of killin within the multiple cloning site via either blunt- or sticky-end ligation not only serves as a highly efficient cloning trap, but also may allow any cloned genes to be expressed as His-tagged fusion proteins for subsequent purification. Thus, pKILLIN is a versatile positive-selection vector ideal for cloning PCR products, making DNA libraries, as well as routine cloning and bacterial expression of genes.