The coordination chemistry of cationic main group clusters: syntheses and structures of [Fe3(Se2)2(CO)10] and [Fe4(Se2)3(CO)12]

The reactions of the polysulfur and selenium cationic clusters S₈²⁺ and Se₈²⁺ with various iron carbonyls were investigated. Several new chalcogen containing iron carbonyl cluster cations were isolated, depending on the nature of the counteranion. In the presence of SbF₆⁻ as a counterion, the cluster [Fe₃(E₂)₂(CO)₁₀] [SbF₆]₂·SO₂ (E = S, Se) could be isolated from the reaction of E₈²⁺ and excess iron carbonyl. The cluster is a picnic-basket shaped molecule of two iron centers linked by two Se₂ groups, with the whole fragment capped by an Fe(CO)₄ group. Crystallographic data for C₁₀O₁₂Fe₃Se₄Sb₂F₁₂S (I): space group monoclinic P2₁/c, A = 11.810(9), b = 24.023(6), c = 10.853(7) Å, β = 107.15(5)°, V = 2942(3) ų, Z = 4, R = 0.0426, R_w = 0.0503. When Sb₂F₁₁⁻ is present as the counterion, or Se₄[Sb₂F₁₁]₂ is used as the cluster cation source, a different cluster can be isolated, which has the formula [Fe₄(Se₂)₃(CO)₁₂] [SbF₆]₂·3SO₂. The dication contains two Fe₂Se₂ fragments bridged by an Se₂ group. Crystallographic data for C₁₂O₁₈Fe₄Se₆Sb₂F₁₂S₃ (III): space group triclinic , b = 18.400(9), C = 10.253(4) Å, = 93.10(4), β = 103.74(3), γ = 93.98(3)°, V = 1995(1) ų, Z = 2, R = 0.0328, R_w = 0.0325. The CO stretches in the IR spectrum all show a large shift to higher wavenumbers, suggesting almost no τ backbonding from the metals. This also correlates with the observed bond distances. All the compounds are extremely sensitive to air and water, and readily lose SO₂ when removed from the solvent. Thus all the crystals were handled at −100°C. The clusters seem to be either insoluble or unstable in all solvents investigated.     

Heats of reaction of HMo(CO)3(C5R5) (R = H, CH3) with diphenyldisulfide and of formation of the clusters [PhSMo(CO)x(C5H5)]2, X = 1,2. Thermodynamic study of molybdenum-sulfur bond strengths

The enthalpies of reaction of HMo(CO)₃C₅R₅ (R = H, CH₃) with diphenyldisulfide producing PhSMo(CO)₃C₅R₅ and PhSH have been measured in toluene and THF solution (R = H, ΔH= −8.5 ± 0.5 kcal mol⁻¹ (tol), −10.8 ± 0.7 kcal mol⁻¹ (THF); R = CH₃, ΔH = −11.3±0.3 kcal mol⁻¹ (tol), −13.2±0.7 kcal mol⁻¹ (THF)). These data are used to estimate the Mo---SPh bond strength to be on the order of 38–41 kcal mol⁻¹ for these complexes. The increased exothermicity of oxidative addition of disulfide in THF versus toluene is attributed to hydrogen bonding between thiophenol produced in the reaction and THF. This was confirmed by measurement of the heat of solution of thiophenol in toluene and THF. Differential scanning calorimetry as well as high temperature calorimetry have been performed on the dimerization and subsequent decarbonylation reactions of PhSMo(CO)₃Cp yielding [PhSMo(CO)₂Cp]₂ and [PhSMo(CO)Cp]₂. The enthalpies of reaction of PhSMo(CO)₃Cp and [PhSMo(CO)₂Cp]₂ with PPh₃, PPh₂Me and P(OMe)₃ have also been measured. The disproportionation reaction: 2[PhSMo(CO)₂Cp]₂ → 2PhSMo(CO)₃Cp + [PhSMP(CO)Cp]₂ is reported and its enthalpy has also been measured. These data allow determination of the enthalpy of formation of the metal-sulfur clusters [PhSMo(CO)_nC₅H₅]₂, N = 1,2.     

Magnetic properties of a cobalt(II) dimer of pseudo tetrahedral geometry [Co2{(CO)9Co3C---COO}5, C14H19N2H]

The crystalline ion pair [Co₂{OOC---CCo₃(CO)₉}₅, C₁₀H₆(N(CH₃)₂)₂H] (1) presents unusual magnetic properties. The X-band EPR spectrum of 1 at room temperature presents two unresolved bands at g=1.98 and 4.55. At a low temperature (20 K), the cluster of clusters 1 presents a complicated spectrum with an intense signal at 1700 G. The magnetic susceptibility of 1 was fit to a two spin S₁=S₂=3/2 Heisenberg model, with J=11.2 cm⁻¹ and a g value of 2.3. There is no field dependence of the magnetization, which suggests intramolecular coupling between the two tetrahedral centers of the cluster. Molecular orbital modeling indicates a sigma path of exchange between two topologically non-equivalent cobalt(II) centers.     

The new enneanuclear nickel carbonyl anion [Ni9(CO)16] and its relationships with the [Ni12(CO)21] and [Ni6Rh3(CO)17] clusters

The reaction of [N(PPh₃)₂]₂[Ni₆(CO)₁₂] with Cu(PPh₃)_xCl (x=1, 2), as well as the degradation of [N(PPh₃)₂]₂[H₂Ni₁₂(CO)₂₁] with PPh₃, affords the new and unstable dark orange–brown [N(PPh₃)₂]₂[Ni₉(CO)₁₆].THF salt in low yields. This salt has been characterized by a CCD X-ray diffraction determination, along with IR spectroscopy and elemental analysis. The close-packed two-layer metal core geometry of the [Ni₉(CO)₁₆]²⁻ dianion is directly related to that of the bimetallic [Ni₆Rh₃(CO)₁₇]³⁻ trianion and may be envisioned to be formally derived from the hcp three-layer geometry of [Ni₁₂(CO)₂₁]⁴⁻ by the substitution of one of the two outer [Ni₃(CO)₃(μ−CO)₃]²⁻ layers with a face-bridging carbonyl group.     

Reaction of [Pt{Fe(CO)3(NO)}2(PhCN)2] with diphenyl(2-pyridyl)phosphine selenide. Crystal structure of [(CO)3Fe(μ3-Se){Pt(CO)P(2-C5H4N)Ph2}2] and its theoretical study

The reaction between the linear trinuclear complex [Pt{Fe(CO)₃(NO)}₂(PhCN)₂] and Ph₂(2-C₅H₄N)PSe led to the isolation and characterization of the 46-electron cluster [(CO)₃Fe(μ₃-Se){Pt(CO)P(2-C₅H₄N)Ph₂}₂] (1), whose structure has been determined by X-ray diffraction methods. The cluster typology, which consists of an open triangle Pt---Fe---Pt capped by a μ₃-Se atom, is rather rare. The chemical bonding in 1 and in similar systems has been analyzed through density functional theory (DFT) and qualitative MO approaches. A strict analogy with the well understood L₂M(μ-acetylene)ML₂ systems is invoked by considering 1 as formed by the (CO)₃FeSe tetrahedral unit stabilized by sidewise interactions of the triple bond with two d¹⁰-L₂M fragments. Otherwise, the 18-electron (CO)₃FeSe monomer is unstable as an isolate molecule. This is confirmed by our DFT calculations that indicate how the well characterized dimer (CO)₃Fe(μ-Se₂)Fe(CO)₃ lies as much as, approximately, 58 kcal mol⁻¹ deeper in energy. Finally, by considering an analogy with [L₂M(μ-dichalcogen)ML₂]^{0, +2} redox systems (M=Pd, Pt), reduction of 1 to a dianion has been hypothesized and the structure of the latter has been tentatively explored by DFT calculations.     

Comparison in halide binding ability between the unsaturated clusters [Pd3(μ-dppm)3(CO)] and [PdPtCo(μ-dppm)2(CO)3(CNBu)] (dppm = Ph2PCH2PPh2)

The trinuclear clusters [Pd₃(μ-dppm)₃(CO)]²⁺ and [PtPdCo(μ-dppm)₂(CO)₃(CN^tBu)]⁺ exhibit a large and a small cavity, respectively, formed by the phenyl rings of the bridging diphosphine ligands. Their binding constants (K₁₁) with halide ions (X⁻) were obtained by UV-Vis spectroscopy. The binding ability varies as I⁻ > Br⁻ > Cl⁻, and [Pd₃(μ-dppm)₃(CO)]²⁺ > [ptPdCo(μ-dppm)₂-(CO)₃(CN^tBu)]⁺. The MO diagram for the related cluster [Pd₂Co(μ-dppm)₂(CO)₄]⁺ has been addressed theoretically in order to predict the nature of the lowest energy electronic bands. For this class of compounds, the lowest energy bands are assigned to charge transfers from the Co center to the Pd₂ centers.     

The synthesis, fluctionality and structural characterization of ReMo3H4(CO)12

The reaction of ReH₉²⁻ with Mo(diglyme)(CO)₃ leads to the formation of the mixed metal cluster trianion, ReMo₃H₄(CO)₁₂³⁻. This species has been characterized analytically, spectroscopically and through X-ray diffraction analysis. A pseudo-tetrahedral arrangement of M(CO)₃ fragments is adopted, such that each set of three carbonyl ligands eclipses the adjacent three tetrahedral edges, an apparent result of the location of the hydride ligands on the tetrahedral faces. Variable temperature NMR studies revealed a fluctional process for some of the carbonyl ligands, but not for the hydrides. Crystal data for [Me₄N]₃[ReMo₃H₄(CO)₁₂]·THF; space group P2₁/n, a = 12.157(2), B = 21.480(4), C = 15.964(3) Å, β = 98.26(1)°, Z = 4, R = 0.067 and R_w = 0.076.     

Chiroptical properties of heterotrimetallic ‘wing-tip’ butterflies; synthesis and crystal structure of (μ-H)Ru2Fe2PdC(CO)12 (η-ß-C10H15)

HRu₂Fe₂PdC(CO)₁₂ (η³-ß-C₁₀H₁₅) cluster was prepared in the reaction of (Et₄N) [HFe₂Ru₂C(CO)₁₂] with [Pd(η³-ß-C₁₀H₁₅)Cl]₂. X-ray structural study of HRu₂Fe₂PdC(CO)₁₂ (η³-ß-C₁₀H₁₅) (where ß-C₁₀H₁₅ is ß-pinenyl) revealed a wing-tip butterfly geometry of the metal core and (1R, 2S, 3S, 5R) absolute configuration for both crystallography independent molecules in the crystal. Chiroptical properties of this cluster are compared with other clusters containing a Pd(η³-ß-C₁₀H₁₅) fragment and discussed.     

The ReH6[P(C6H5)3]2 ion as a ligand: complexes with M(CO)3 fragments (M = Cr, Mo, W)

The reactions of [(H₅C₆)₃P]₂ReH₆⁻ with (CH₃CN)₃Cr(CO)₃, (diglyme)Mo(CO)₃ or (C₃H₇CN)₃W(CO)₃ led to the formation of [(H₅C₆)₃P]₂ReH₆M(CO)₃⁻ (M = Cr, Mo, W) complexes. These have been characterized by IR and NMR spectroscopies, as well as elemental analyses. A single crystal X-ray diffraction study has also been carried out for the M = Cr complex as a K(18-crown-6)⁺ salt. The complex crystallizes as a THF monosolvate in the monoclinic space group P2₁/n with a = 22.323(6), B = 9.523(2), C = 27.502(5) Å, β = 104.98(2)⁰ and V = 5648 ų for Z = 4. The Re---Cr separation is 2.5745(12) Å, and the two phosphine ligands are oriented unsymmetrically. Although the hydride ligands were not found, the presence of three bridging hydrides and a dodecahedral coordination geometry about rhenium could be inferred. Low temperature ¹H and ³¹P NMR spectroscopic studies did not reveal the low symmetry of the solid state structure.     

Mixed-metal butterfly acetamidediato clusters derived from a highly reactive ruthenium oxo cluster: synthesis and characterization of [(PPh3)2N][MRu3(CO)12(η-μ3-NC(μ-O)CH3)], (M = Mn or Re)

Analogy with the isolable oxo cluster [Fe₃(CO)₉(μ₃-O)]²⁻, which is structurally interesting and synthetically useful, prompted the present attempt to synthesize its ruthenium analog. Although the high reactivity of [Ru₃(CO)₉(μ₃-O)]²⁻ (I) prevented its isolation, the reaction of this species with [M(CO)₃(NCCH₃)]⁺, where M = Mn or Re, yields [PPN][MRu₃(CO)₁₂(η²-μ₃-NC(μ-O)CH₃]⁻. The high nucleophilicity of the oxo ligand in [Ru₃(CO)₉(μ₃-O)]²⁻ (I) appears to be responsible for the conversion of acetonitrile to an acetamidediato ligand and for the instability of I. The crystal structure of [PPN][MnRu₃(CO)₁₂(η²-μ₃-NC(μ-O)CH₃)]] reveals a hinged butterfly array of metal atoms in which the acetamidediato ligand bridges the two wings with μ₃-N bonding to an Mn and two Ru atoms, and μ-O bonding to an Ru atom.     

Synthesis and properties of the dichloro [tetramethyl (trifluoromethyl)cyclopentadienyl]ruthenium dimer: X-ray structure of [M2(η-C5Me4CF3)2Cl2(μ-Cl)2] (M=Ru, Rh)

The reaction of RuCl₃(H₂O), with C₅Me₄CF₃J in refluxing EtOH gives [Ru₂(η⁵-C₅Me₁CF₂)₂ (μ-Cl₂] (20 in 44% yield. Dimer 2 antiferromagnetic (−2J=200 cm¹). The crystal structures of 2 (rhombohedral system, R3 space group, Z=9, R=0.0589) and [Rh₂(η⁵-C₅Me₄CF₃(₂Cl₂(μ-Cl)₂] (3) (rhombohedral system. space group, Z = 9, R = 0.0641) were solved; both complexes have dimeric structures with a trans arrangement of the η⁵-C₅Me₄CF₄ rings. Comparison of the geometry of 2 and 3 with those of the corresponding η⁵-C₅Me₅ complexes shows that lowering the ring symmetry causes significant distortion of the M₂(μ-Cl)₂ moiety. The analysis of the MCl₃ fragment conformations in 2 and 3 and in the η⁵-C₅ME₅ analogues shows that they are correlated with the M---M distances. The Cl atoms are displaced by Br on reaction of 2 with KBr in MeOH to give the diamagnetic dimer [Ru₂(η⁵-C₅Me₄CF₃)₂Br₂ (μ-Br₂] (4). Complex 2 reacts with O₂ in CH₂Cl₂ solution at ambient temperature to form a mixture of isomeric η⁶-fulvene dimers [Ru₂(η⁶-C₅Me₃CF₃ = CH₂)₂Cl₂(μ-Cl)₂] (5). Reactions of 5 with CO and allyl chloride give Ru(η⁵-C₅Me₃CF₃CH₂Cl)(CO)₂Cl (6) and Ru(η⁵-C₅Me₃CF₃CF₃CH₂Cl)(η³-C₃H₅)Cl₂ (7) respectively.     

Spin-crossover iron(II) complexes [Fe(Medpq)(py)2(NCS)2] and [Fe(Medpq)(py)2(NCSe)2]: syntheses, characterization and magnetic properties

Two new spin-crossover complexes, [Fe(Medpq)(py)₂(NCS)₂] · py · 0.5H₂O (1) and [Fe(Medpq)(py)₂(NCSe)₂] · py (2) (Medpq = 2-methyldipyrido[3,2-f:2′,3′-h]-quinoxaline, py = pyridine), have been synthesized. The crystal structures were determined at both room temperature (298 K) and low temperature (110 K). Complexes 1 and 2 crystallize in the orthorhombic space group Pbca and monoclinic space group P2₁/n, respectively. In both complexes, the distorted [FeN₆] octahedron is formed by six nitrogen atoms from Medpq, the trans pyridine molecules and the cis NCX⁻ groups. The thermal spin transition is accompanied by the shortening of the mean Fe–N distances by 0.194 Å for 2. The mononuclear [Fe(Medpq)(py)₂(NCS)₂] and [Fe(Medpq)(py)₂(NCSe)₂] neutral species interact each other via π-stacking, resulting in a one-dimensional extended structure for both 1 and 2. There exist C–HX (X = S, Se) hydrogen bonds for both complexes. Variable-temperature magnetic susceptibility measurements and Mössbauer spectroscopy reveal the occurrence of a gradual spin transition. The transitions are centered at T_1/2 = 120 K for 1 and T_1/2 = 180 K for 2, respectively.     

The preparation, characterisation and low temperature X-ray structure of Ru6(η-μ4-CO)2(CO)13(η6-C6Me6)

The new organometallic cluster (η²-μ₄-CO)₂(CO)₁₃(η⁶-C₆Me₆) has been prepared by the thermolysis of Ru₃(CO)₁₂ with hexamethylbenzene in octane and characterised by a single crystal X-ray diffraction study. It is isostructural with the known cluster Ru₆(η²-μ₄-CO)₂(CO)₁₃(η⁶-C₆H₃Me₃) and the metal core constitutnts the same tetrahedral Ru₄ unit with two edge-bridging Ru atoms. The mesitylene derivative has been shown to undergo rearrangement to afford the octahedral carbido cluster Ru₆C(CO)₁₄(η⁶-C₆H₃Me₃), but this conversion is not observed for the new hexamethylbenzene derivative.     

Chemistry of the azine phosphine ligand Z,E-PPh2CH2C(Bu)=N-N=CMe(C6H4NO2-4): crystal structure of [Mo(CO)4{PPh2CH2C(Bu)=N-N=CMe(C6H4NO2-4)}]

Condensation of Z-PPh₂CH₂C(Bu^t)=NNH₂ with 4-nitroacetophenone gave the azine phosphine Z,E-PPh₂CH₂C(Bu^t)=N-N=CMe(C₆H₄NO₂-4) (I). The corresponding phsophine oxide II was prepared by treatment of I with H₂O₂. The phosphine I with [Mo(CO)₄(nbd)] (nbd=norbornadiene) gave [Mo(CO)₄{PPh₂CH₂C(Bu^t)=N-N=CMe(C₆H₄NO₂-4)}] (1a); the corresponding tungsten 1b and chromium 1c complexes were made similarly. The crystal structure of 1a was determined by X-ray diffraction and showed the presence of a six-membered chelate ring with the bulky 4-nitrophenyl group held close to the metal. Oxidation of 1a with bromine gave the seven-coordinate molybdenum (II) complex 2. Treatment of [PtMe₂(cod)] (cod=cycloocta-1,5-diene) with I at 20°C gave the dimethyl-platinum (II) complex [PtMe₂{PPh₂CH₂C(Bu^t)=N-N=CMe(C₆H₄NO₂-4)}] (3a) which with MeI gave the iodotrimethylplatinum(IV) complex 4. Treatment of 3a with C≡O opened the chelate ring to give the dimethyl(carbonyl)platinum(II) complex 5 containing a monodentate phosphine ligand. When 3a was heated in toluene solution at 110°C it gave the cyclometallated methylplatinum(II) complex [PtMe{PPh₂CH₂C(Bu^t)=N-N=CMe(C₆H₃NO₂-4)}] (6). Treatment of 6 with MeI gave the platinum(IV) complex 7. The dichloropalladium(II) complex [PdCl₂{PPh₂CH₂C(Bu^t)=N-N=CMe(C₆H₄NO₂-4)}] (3b) was prepared by treatment of [PdCl₂(NCPh)₂] with I in CH₂Cl₂. Treatment of [PtCl₂(NCMe)₂] with 2 equiv. of I gave the trans-bis(phosphine) complex 8. When 2 equiv. of I were treated with [PtCl₂(cod)] followed by NH₄PF₆ this gave the salt 9a containing two six-membered chelate rings; the analogous palladium(II) 9b) salt was also prepared. Treatment of 2 equiv. of I with [PtCl₂(cod)] followed by NH₄PF₆ gave the PF₆ salt 10 containing a six-membered chelate ring and a monodentate ligand. When 10 was treated with AgNO₃ followed by NH₄PF₆ this gave the bis-chelate complex 11 containing five- and six-membered chelate rings. Treatment of [IrCl(CO)₂(p-toluidine)] with I gave the cyclometallated iridium(III) hydride complex [IrHClCO{PPh₂CH₂C(Bu^t)=N-N=CMe(C₆H₃NO₂-4)}] (12). [RuCl₂(PPh₃)₃] with the phosphine I resulted in the Ru(II) complex 13 in which the ortho hydrogens of the 4-nitrophenyl group are agostically interacting with ruthenium. Proton, Phosphorus-31, some carbon-13 NMR and IR data have been obtained. Crystals of 1a are orthorhombic, space group Pna2₁, with a = 1819.3(2), b = 1050.0(1), c = 1614.8(2) pm and Z = 4; final R = 0.0191 for 2616 observed reflections.     

Organometallic chemistry of diphosphazanes. Rhodium(I) complexes of RN(PX2)2 (R = C6H5; X = OC6H5, OC6H4Br−p, R = CH3; X = OC6H5)

Reactions of [Rh(COD)Cl]₂ with the ligand RN(PX₂)₂ (1: R = C₆H₅; X = OC₆H₅) give mono- or disubstituted complexes of the type [Rh₂(COD)Cl₂{ν²−C₆H₅N(P(OC₆H₅)₂)₂}] or [RhCl{ν²−C₆H₅ N(P(OC₆H₅)₂)₂ }]₂ depending on the reaction conditions. Reaction of 1 with [Rh(CO)₂Cl]₂ gives the symmetric binuclear complex, [Rh(CO)Cl{μ−C₆H₅N(P(OC₆H₅)₂)₂} ₂, whereas the same reaction with 2 (R = CH₃; X = OC₆H₅) leads to the formation of an asymmetric complex of the type [Rh(CO)(μ−CO)Cl{μ−CH₃N(P(OC₆H₅)₂)₂}₂ containing both terminal and bridging CO groups. Interestingly the reaction of 3 (R = C₆H₅, X = OC₆H₄Br−p with either [Rh(COD)Cl]₂ or [Rh(CO)₂Cl]₂ leads only to the formation of the chlorine bridged binuclear complex, [RhCl{ν²−C₆H₅N(P(OC₆H₄Br−p)₂)₂}]₂. The structural elucidation of the complexes was carried out by elemental analyses, IR and ³¹P NMR spectroscopic data.     

The synthesis of the tripodal phosphine CH3C{CH2P(m-CF3C6H4)2}3 and its rhodium coordination chemistry

The new tripodal phosphine CH₃C{CH₂P(m-CF₃C₆H₄)₂}₃, CF₃PPP, was prepared by reacting CH₃C(CH₂Br)₃ with Li⁺P(m-CF₃C₆H₄)₂⁻, the latter being best obtained by adding Li⁺NⁱPr₂⁻ to PH(m-CF₃C₆H₄)₂. The rhodium complexes [RhCl(CO)(CF₃PPP)], [Rh(LL)(CF₃PPP)](CF₃SO₃) (LL = 2 CO or NBD), [RhX₃(CF₃PPP)], [RhX(MeCN)₃(CF₃PPP)](CF₃SO₃)₂ (X = H and Cl), [RhCl₂(MeCN)(CF₃PPP)](CF₃SO₃) and [Rh(MeCN)₃(CF₃PPP)](CF₃SO₃)₃ were prepared and characterized. The X-ray crystal structure of [Rh(NBD)(CF₃PPP)](CF₃SO₃) is reported. The lower oxygen sensitivity of the CF₃PPP rhodium(I) complexes, relative to the corresponding species with the parent ligand CH₃C(CH₂PPh₂)₃, is attributed to the higher effective nuclear charge on the metal centers caused by the presence of the six CF₃ substituents on the terdentate phosphine. A similar effect may be responsible for the easier hydrolysis of the CF₃PPP-containing, cationic rhodium(III) complexes relative to the corresponding compounds of the parent ligand.     

Chemistry in environmentally benign media Part 1. Synthesis and characterization of 1,2-bis[bis(hydroxymethyl)phosphino]ethane (‘HMPE’). X-ray structure of [Pt{(HOH2C)2PCH2CH2P(CH2OH)2}2](Cl)2

The water-soluble bisphosphine, 1,2-bis(bis(hydroxymethyl)phosphino)ethane (1), was synthesized in near quantitative yield by the reaction of bisphosphine, H₂PCH₂CH₂PH₂, with an aqueous formaldehyde in the presence of K₂PtCl₄. The reaction of this water-soluble bisphosphine 1 with cis-Pt(COD)Cl₂ affords the mononuclear bischelate complex, [Pt{(HOH₂C)₂PCH₂CH₂P(CH₂OH)₂}₂](Cl)₂ (2), in near quantitative yield. The new ligand and complex have been characterized spectroscopically and the structure of the metal complex, 2, was determined by X-ray crystallography. The Pt(II) complex 2 crystallizes in the orthorhombic space group Pbca(a=14.623(1), B=16.216(2), C=9.319(4) Å) with Z=4. The final R value is 0.024.     

Synthesis and ligand substitution reactions of [Ta(CO)5NH3]

Protonation of Na₃[Ta(CO)₅] in liquid ammonia provides the thermally unstable Na[Ta(CO)₅NH₃], which may be isolated as the crystalline and deep violet salt [Ph₄As][Ta(CO)₅NH₃]. Sodium amminepentacarbonyltantalate(1−) reacts with PMe₃, PPh₃, P(OMe)₃, AsPh₃, SbPh₃, CNtBu and CN⁻ at about 0°C in NH₃/THF to give exclusively the corresponding [Ta(CO)₅L]^z. These have been isolated as tetraethylammonium salts in 54–84% yields.     

The interaction of Lewis acidic boron derivatives with Re(CO)5−nH(PMe3)n complexes

Lewis acid adducts of the hydrides cis- and trans-Re(CO)(PMe₃)₄H (1) and (2), mer-Re(CO)₂(PMe₃)₃H (3), fac-Re(CO)₂(PMe₃)₃H (4) and trans-Re(CO)₃(PMe₃)₂H (5) were studied with BH₃ and 9-borabicyclo[3,3,1] norbonane (BBNH). Using BH₃·THF and (BBNH)₂ 1 and 2 afforded Re(CO)(PMe₃)₃(η²-BH₄) (6) and Re(CO)(PMe₃)₃(η²-BBNH₂) (7) as stable and isolable products. VT IR studies established for the reaction to 7 that BBNH first attaches in a pre-equilibrium to the O_CO atom of 1 or 2. At higher temperatures ReH adduct formation occurs with instantaneous transformation to 7 and elimination of PMe₃·BBNH. In a similar way, the hydrides 3 and 4 were converted with BH₃·THF and (BBNH)₂ to yield the stable complexes Re(CO)₂(PMe₃)₂(η²-BH₄) (8) and Re(CO)₂(PMe₃)₂(η²-BBNH₂) (9). The intermediacy of the η¹-BH₄ adducts mer-/fac-Re(CO)₂(PMe₃)₃(η¹-BH₄) was confirmed by VT ¹H, ³¹P NMR and VT IR experiments. The conversion of 5 with BH₃·THF led to equilibria with adducts at the O_CO terminus in trans position to H and with H_Re as revealed by VT IR studies. Temperature dependent ³¹P equilibrium studies allowed to calculate ΔH=−4.9 kcal mol⁻¹ and ΔS=+0.034 e.u. for this reaction. These adducts could not be isolated. Compound 5 does not react with (BBNH)₂ even at elevated temperatures. DFT calculations were carried out to support the structures of the BH₃ adducts of 5. In addition a vibrational analysis helped to unravel the IR band assignments of the involved compounds. DFT calculations on 8 confirmed its C_2v structure. X-ray diffraction studies were carried out on single crystals of 6 and 7.     

The propensity of alkoxide and aryloxide derivatives of tungsten carbonyls to aggregate in solution. Synthesis and X-ray structures of dinuclear, trinuclear and tetranuclear complexes derived from the MeOW(CO)5 anion

The complex [Et₄N][W(CO)₅OMe] (1) has been prepared from the reaction of the photochemically generated W(CO)₅THF adduct and [Et₄N][OH] in methanol. Complex 1 was shown to undergo rapid CO dissociation in THF to quantitatively provide the dimeric dianion, [W(CO)₄OMe]₂²⁻. The resulting THF insoluble salt [Et₄N]₂[W(CO)₄OMe]₂ (2) has been structurally characterized by X-ray crystallography, with the doubly bridging methoxide ligands being in an anti configuration. Complex 2 was found to subsequently react with excess methoxide ligand in a THF slurry to afford the face-sharing octahedron complex [Et₄N]₃[W₂(CO)₆(OMe)₃] (3) which contains three doubly bridging methoxide groups. In the absence of excess methoxide ligand complex 2 cleanly yields the tetrameric complex [Et₄N]₄[W(CO)₃OMe]₄ (4) which has been structurally characterized as a cubane-like arrangement with triply bridging μ³-methoxide groups and W(CO)₃ units. Although complex 3 was not characterized in the solid state, the closely related glycolate derivative [Et₄N]₃[W₂(CO)₆(OCH₂CH₂OH)₃] (5) was synthesized and its structure determined by X-ray crystallography. The trianions of complex 5 are linked in the crystal lattice by strong intermolecular hydrogen bonds. Crystal data for 2: space group P2₁/n, a = 7.696(2), b = 22.019(4), c = 9.714(2) Å, β = 92.22(3)°, Z = 4, R = 6.43%. Crystal data for 4: space group Fddd, a = 12.433(9), b = 24.01(2), c = 39.29(3) Å, Z = 8, R = 8.13%. Crystal data for 5: space group P2₁2₁2₁, a = 11.43(2), b = 12.91(1), c = 29.85(6) Å, Z = 8, R = 8.29%. Finally, the rate of CO ligand dissociation in the closely related aryloxide derivatives [Et₄N][W(CO)₅OR] (R = C₆H₅ and 3,5-F₂C₆H₃) were measured to be 2.15 × 10⁻² and 1.31 × 10⁻³ s⁻¹, respectively, in THF solution at 5°C. Hence, the value of the rate constant of 2.15 × 10⁻² s⁻¹ establishes a lower limit for the first-order rate constant for CO loss in the W(CO)₅OMe⁻ anion, since the methoxide ligand is a better π-donating group than phenoxide.