pHG276: a multiple cloning site pBR322 copy number vector expressing a functional lac alpha peptide from the bacteriophage lambda PR promoter

The bacteriophage lambda early promoter PR has been used to direct the synthesis of lac alpha in a plasmid containing the multiple cloning site of pUC8. The copy number of the plasmid is controlled by the rop(rom) gene and the plasmid incorporates the cI857 gene for temperature regulation of lac alpha expression. Isolation of recombinant derivatives with DNA inserts in the multiple cloning region can be identified by insertional inactivation of lac alpha and consequently, a Lac- phenotype in a host carrying the M15 deletion of lac. The potential of pHG276 as a fully regulated expression vector is examined.     

pACYC184-derived cloning vectors containing the multiple cloning site and lacZ alpha reporter gene of pUC8/9 and pUC18/19 plasmids

A new series of vectors, pSU2716, pSU2717, pSU2718, and pSU2719, has been constructed. The plasmids contain (i) the P15A replicon, (ii) the chloramphenicol acetyl transferase (CAT)-coding gene from Tn9, and (iii) the HaeII fragment which carries the multiple cloning site and the lacZ alpha reporter gene of pUC8, pUC9, pUC18 and pUC19, respectively. These vectors allow rapid and simple transfer of inserts from pUC plasmids, have an intermediate copy number (which allows regulated expression from the lac promoter), and are compatible with ColE1-derived vectors (and, therefore, can be used in studies requiring the joint expression of two genes, for example, in genetic complementation analysis). Furthermore, the accumulation of CAT instead of beta-lactamase, allows an easy visualization in sodium dodecyl sulfate-polyacrylamide-gel electrophoresis of proteins of 28-35 kDa, which can otherwise be obscured by the beta-lactamase.     

Construction of expression plasmids producing high levels of human immuno interferon in E. coli

Improved expression vectors have been constructed which are derived from runaway-replication mutants of plasmid pYM307 and carry the strong hybrid promoter tac with lac iq gene. The activity of this promoter is controlled by lac repressor, product of the lac iq gene. Heat induction leads to amplification of the plasmid copy number. This system was used for high level expression of the chemically synthesized gene for human immune interferon (hIFN-7). 3 h after induction at 37 degrees C the hIFN-7 amounted to about 20% of total cellular proteins.     

Construction of mobilizable vectors derived from plasmids RP4, pUC18 and pUC19

Mobilizable narrow-host-range plasmids were constructed from pUC18 and pUC19 by addition of a segment of pSUP2021 bearing the basis of mobilization (bom) site and origin of transfer (oriT) of RP4. One pair of expression vectors, pARO180 and pARO190, retains the beta-lactamase (bla) gene and twelve of the 13 restriction enzyme multiple cloning sites (MCS) of pUC18/19. Another pair was created by replacing the bla gene with the gene encoding kanamycin resistance (kan) from Tn5. The molecules replicate to high copy number in Escherichia coli and Enterobacter aerogenes. They can be transferred efficiently to other Gram- bacteria from the mobilizing strain, E. coli S17-1. In non-enteric strains, the new plasmids can be used as suicide vectors in site-specific insertional mutagenesis.     

Construction and properties of a family of pACYC184-derived cloning vectors compatible with pBR322 and its derivatives.

A family of cloning vectors derived from plasmid pACYC184 and, therefore, compatible with pBR322 and its derivatives (especially the pUC family of vectors), is described. They all contain a multiple cloning site (MCS) and the lacZ alpha reporter gene for easy cloning. They have been grouped in three sets: (i) six of the vectors contain a chloramphenicol-resistance (CmR)-encoding gene and each a different MCS with 16 unique restriction sites overall; (ii) another six vectors contain a kanamycin-resistance (KmR)-encoding gene and the same six MCS; and (iii) two CmR vectors that contain the SP6 and T7 promoters flanking the MCS and lacZ alpha reporter gene of pUC18/19.     

The pMTL nic- cloning vectors. I. Improved pUC polylinker regions to facilitate the use of sonicated DNA for nucleotide sequencing

A series of nic- cloning vectors have been constructed analogous to the pUC plasmids but which are smaller in size and carry more extensive polylinker regions within the lacZ' gene. The vectors pMTL20 and pMTL21 carry six additional sites (AatII, MluI, NcoI, BglII, XhoI and StuI) to those present in pUC18 and pUC19, while pMTL22 and -23 possess eleven new cloning sites (ActII, MluI, NcoI, BglII, XhoI, StuI, NaeI, EcoRV, ClaI, NdeI and NruI). More importantly, the relative order of the restriction sites within the polylinker of these latter vectors has been totally rearranged, relative to pUC18 and pUC19, to facilitate the conversion of DNA fragments with incompatible ends to fragments with compatible termini. The availability of such DNA fragments is a crucial requirement when M13 templates are generated for dideoxy sequencing by the sonication procedure. Derivatives of these vectors have also been constructed which demonstrate improved segregational stability by incorporation of the pSC101 par locus. During the construction of these new vectors data were obtained which demonstrated that the pUC and pMTL plasmids contain a previously unreported single base pair difference within the RNA I/RNA II region (compared to pBR322) responsible for a three-fold increase in plasmid copy number. The pUC and pMTL plasmids were also shown to be functionally nic-, thus affording the lowest categorisation in genetic manipulation experiments.     

Construction of a high-copy "ATG vector" for expression in Escherichia coli.

We report the construction of an inducible, high-copy plasmid for the expression of foreign proteins in Escherichia coli. This plasmid, pPB1, combines the trc promoter, beta-galactosidase translation start site, and polylinker of pKK233-2 with the origin of replication region of pUC19. Replacement of the origin of replication of pKK233-2 results in a threefold increase in plasmid copy number of pPB1 compared with pKK233-2. Subclones of the cDNA for rabbit muscle fructose-1,6-bisphosphate aldolase (E.C. 4.1.2.13) in the two expression plasmids exhibit a comparable difference in copy number. An increase in protein expression measured by SDS-PAGE and aldolase specific activities reflects the increased copy number. Specific activities of aldolases in bacterial extracts differ approximately sixfold between the two expression plasmids in E. coli JM83. Aldolase A can compose up to 40% of the total protein in E. coli JM83 when expressed in pPB1, from which more than 100 mg of purified enzyme can be obtained per liter culture.     

Partial characterization of a small, multiple-copy plasmid from Streptomyces espinosus and the derivation of a high copy-number deletion mutant

An organism classified as Streptomyces espinosus was found to carry an approx. 9.2-kb plasmid. This plasmid, designated pUC6, has a copy number of 30-40 per host genome equivalent. Plasmid pUC1061, a copy-number mutant of pUC6, was isolated after in vitro deletion of an approx. 2.0-kb XhoI restriction fragment. Plasmid pUC1061 has a copy number of 500-600. Plasmid pUC1061 appears to be incompatible with pUC6 and will transform a pUC6-containing culture at a frequency of approx. 1%. The sizes, restriction maps and copy numbers of plasmids pUC6 and pUC1061 indicate these may be valuable vectors for gene cloning Streptomyces.     

Construction of a plasmid vector for the regulatable high level expression of eukaryotic genes in Escherichia coli: an application to overproduction of chicken lysozyme

A novel expression vector pKP1500 for synthesizing unfused protein in Escherichia coli was constructed. pKP1500 perserves the tac promoter, the lacZ SD sequence, unique restriction sites (EcoRI, SmaI, BamHI, SalI, PstI and HindIII) and the rrnB terminators of pKK223-3, but the replication origin is replaced with that of pUC9. Construction of this plasmid is based upon the observation that the copy number control of pUC9 is temperature dependent. At 28 degrees C, the copy number of pKP1500 is less than 25 per chromosome, approximately the same copy number as that of pKK223-3, which contains the replication origin of pBR322, whereas at 42 degrees C, the copy number increases about 10 times and reaches up to 230 copies per chromosome. The main advantage of this system is that the temperature-dependent copy control and regulatable expression of the tac promoter make cells carrying pKP1500 derivatives stable against selective pressure by detrimental overproduction of foreign proteins at a low temperature and permits high expression of cloned DNAs at a high temperature. When chicken lysozyme cDNA carrying the initiation codon (ATG) immediately upstream from the Lys1 codon was inserted downstream from the tac promoter and the SD sequence, the pKP1500 derivative produced lysozyme at about 25% of the total cellular proteins. This value is more than 10 times higher than that obtained with the pKK223-3 derivative carrying the same lysozyme cDNA. By comparison, the expression of eukaryotic genes from the tac promoter reported by others has usually been less than a few % of the total cellular protein.(ABSTRACT TRUNCATED AT 250 WORDS)     

Cloning, characterization, and effects of overexpression of the Escherichia coli rnd gene encoding RNase D.

RNase D is a 3'-exoribonuclease whose in vitro specificity has suggested that it is involved in the processing of tRNA precursors. Its in vivo role has remained unclear, however, because mutant cells devoid of the enzyme display no defect in growth or tRNA processing. To learn more about the structure and function of RNase D, we cloned the Escherichia coli rnd gene, which is thought to code for this enzyme. The rnd gene was isolated from a cosmid library based on elevated RNase D activity and was subcloned as a 1.4-kilobase-pair fragment in pUC18. Maxicell analysis of the cloned fragment revealed that a single protein of approximately 40 kilodaltons, which is the size of RNase D, was synthesized. The rnd gene is present as a single copy on the E. coli chromosome and is totally absent in a deletion mutant. Cells that harbored the cloned rnd gene displayed RNase D activity that was elevated as much as 20-fold over that of the wild type. As growth of the culture progressed, however, RNase D specific activity declined dramatically, together with a similar decrease in plasmid copy number. In contrast, no decrease in copy number was observed with an inactive rnd gene. Placement of the rnd gene downstream from the lac promoter led to inducible RNase D overexpression and concomitantly slowed cell growth. These findings support the idea that rnd is the structural gene for RNase D and indicate that elevated RNase D activity is deleterious to E. coli.     

Evidence that selected amplification of a bacterial lac frameshift allele stimulates Lac(+) reversion (adaptive mutation) with or without general hypermutability

In the genetic system of Cairns and Foster, a nongrowing population of an E. coli lac frameshift mutant appears to specifically accumulate Lac(+) revertants when starved on medium including lactose (adaptive mutation). This behavior has been attributed to stress-induced general mutagenesis in a subpopulation of starved cells (the hypermutable state model). We have suggested that, on the contrary, stress has no direct effect on mutability but favors only growth of cells that amplify their leaky mutant lac region (the amplification mutagenesis model). Selection enhances reversion primarily by increasing the mutant lac copy number within each developing clone on the selection plate. The observed general mutagenesis is attributed to a side effect of growth with an amplification-induction of SOS by DNA fragments released from a tandem array of lac copies. Here we show that the S. enterica version of the Cairns system shows SOS-dependent general mutagenesis and behaves in every way like the original E. coli system. In both systems, lac revertants are mutagenized during selection. Eliminating the 35-fold increase in mutation rate reduces revertant number only 2- to 4-fold. This discrepancy is due to continued growth of amplification cells until some clones manage to revert without mutagenesis solely by increasing their lac copy number. Reversion in the absence of mutagenesis is still dependent on RecA function, as expected if it depends on lac amplification (a recombination-dependent process). These observations support the amplification mutagenesis model.     

Cloning and characterization of the termination site tI for the gene int transcript in phage lambda

A series of plasmid vectors containing the multiple cloning site (MCS7) of M13mp7 has been constructed. In one of these vectors a kanamycin-resistance marker has been inserted into the center of the symmetrical MCS7 to yield a restriction-site-mobilizing element (RSM). The drug-resistance marker can be cleaved out of this vector with any of the restriction enzymes that recognize a site of the flanking sequences of the RSM to generate an RSM with either various sticky ends or blunt ends. These fragments can be used for insertion mutagenesis of any target molecule with compatible restriction sites. Insertion mutants are selected by their resistance to kanamycin. When the drug-resistance marker is removed with PstI, a small in-frame insertion can be generated. In addition, two new MCSs having single restriction sites have been formed by altering the symmetrical structure of MCS7. The resulting plasmids pUC8 and pUC9 allow one to clone doubly digested restriction fragments separately with both orientations in respect to the lac promoter. The terminal sequences of any DNA cloned in these plasmids can be characterized using the universal M13 primers.     

In vivo plasmid construction by integrative recombination within a 156 bp sequence homology

pHG165, a pBR322 copy number derivative of pUC8, has a 38-bp polylinker multiple cloning site located at the 5′ end of lacα. A further 156 bp, 3′ to the multiple cloning site, completes the coding sequence for the production of the β galactosidase α peptide. We describe the use of in vivo plasmid-chromosone cointegrates as a construction method that in this instance has enabled us to cross out the pHG165 multiple cloning site to obtain a wild-type β-galactosidase sequence for the α peptide. Because the DNA sequence available for homologous recombination was only 156 bp in length, the frequency of crosses that removed the multiple cloning site was less than 1 × 10⁻⁹. These crosses were easily obtained, however, after amplification by ampicillin selection.