Structure-activity relationships for inhibition of human cholinesterases by alkyl amide phenothiazine derivatives

Several lines of evidence indicate that inhibition of butyrylcholinesterase (BuChE) is important in the treatment of certain dementias. Further testing of this concept requires inhibitors that are both BuChE-selective and robust. N-alkyl derivatives (2, 3, 4) of phenothiazine (1) have previously been found to inhibit only BuChE in a mechanism involving pi-pi interaction between the phenothiazine tricyclic ring system and aromatic residues in the active site gorge. To explore features of phenothiazines that affect the selectivity and potency of BuChE inhibition, a series of N-carbonyl derivatives (5-25) was synthesized and examined for the ability to inhibit cholinesterases. Some of the synthesized derivatives also inhibited AChE through a different mechanism involving carbonyl interaction within the active site gorge. Binding of these derivatives takes place within the gorge, since this inhibition disappears when the molecular volume of the derivative exceeds the estimated active site gorge volume of this enzyme. In contrast, BuChE, with a much larger active site gorge, exhibited inhibition that increased directly with the molecular volumes of the derivatives. This study describes two distinct mechanisms for binding phenothiazine amide derivatives to BuChE and AChE. Molecular volume was found to be an important parameter for BuChE-specific inhibition.     

A 3D localized surface plasmon resonance biosensor for the study of trivalent arsenic binding to the ArsA ATPase

A self-assembled 3D hydrogel-nanoparticle composite integrated surface plasmon resonance (SPR) sensor is reported here. The novel assembled substrate was developed by means of a surface mediated radical co-polymerization process to obtain a highly sensitive hydrogel-based thin film that possesses specific binding sites for target analytes. Initially, amino group modified gold nanoparticles (AuNPs) were covalently linked to acrylic acid monomer. Following this, N-isopropylacrylamide (NIPAAm) and AuNPs linked acrylic acid (AAc) monomers were randomly co-polymerized by the "grafting from" method in the presence of initiator and crosslinker onto the sensing surface. Surface characterization techniques were utilized to evaluate the thickness and composition of the hydrogel-nanoparticle film. The sensing platform was employed to study the binding kinetics and conformational changes of the ArsA ATPase as a consequence of binding trivalent arsenicals under a variety of conditions. ArsA, the catalytic subunit of the ArsAB arsenite (As(III)) translocating ATPase, is one of the five proteins encoded by the arsenical resistance (ars) operon of plasmid R773 in cells of Escherichia coli, that confers resistance to trivalent and pentavalent salts of the metalloid arsenic. SPR measurements indicate that the 3D hydrogel-nanoparticle coated sensors exhibited a higher sensitivity than that of the 2D AuNPs decorated sensors. Binding of As(III) to ArsA is greatly facilitated by the presence of magnesium ion and ATP.     

Poly(HEMA) brushes emerging as a new platform for direct detection of food pathogen in milk samples

Surface plasmon resonance (SPR) biosensors capable of in real time detection of Cronobacter at concentrations down to 10? cells mL?1 in samples of consumer fresh-whole fat milk, powder whole-fat milk preparation, and powder infant formulation were developed for the first time. Antibodies against Cronobacter were covalently attached onto polymer brushes of poly(2-hydroxyethyl methacrylate) (poly(HEMA)) grafted from the SPR chip surface. The lowest detection limit, 10? cells mL?1, was achieved in phosphate buffered saline (pH 7.4) with sensors prepared by covalent immobilization of the same antibodies onto a self assembled monolayer (SAM) of hexa(ethylene glycol) undecanethiol (EG?). However, when the EG? based sensors were challenged with milk samples the non-specific response due to the deposition of non-targeted compounds from the milk samples was much higher than the specific response to Cronobacter hampering the detection in milk. Similar interfering fouling was observed on antifouling polymer brushes of hydroxy-capped oligoethylene glycol methacrylate and even a 10 times higher fouling was observed on the widely used SAM of mixed hydroxy- and carboxy-terminated alkanethiols. Only poly(HEMA) brushes totally suppressed the fouling from milk samples. The robust well-controlled surface initiated atom transfer radical polymerization of HEMA allowed the preparation of highly dense brushes with a minimal thickness so that the capture of antigens by the antibodies immobilized on the brush layer could take place close to the gold SPR surface to provide a stronger optical response while the fouling was still suppressed. A minimum thickness of 19 nm of poly(HEMA) brush layer was necessary to suppress completely non-specific sensor response to fouling from milk.     

Surface plasmon resonance sensing detection of mercury and lead ions based on conducting polymer composite

A new sensing area for a sensor based on surface plasmon resonance (SPR) was fabricated to detect trace amounts of mercury and lead ions. The gold surface used for SPR measurements were modified with polypyrrole-chitosan (PPy-CHI) conducting polymer composite. The polymer layer was deposited on the gold surface by electrodeposition. This optical sensor was used for monitoring toxic metal ions with and without sensitivity enhancement by chitosan in water samples. The higher amounts of resonance angle unit (ΔRU) were obtained for PPy-CHI film due to a specific binding of chitosan with Pb(2+) and Hg(2+) ions. The Pb(2+) ion bind to the polymer films most strongly, and the sensor was more sensitive to Pb(2+) compared to Hg(2+). The concentrations of ions in the parts per million range produced the changes in the SPR angle minimum in the region of 0.03 to 0.07. Data analysis was done by Matlab software using Fresnel formula for multilayer system.     

Surface plasmon resonance immunosensor for the detection of Salmonella typhimurium

An immunosensor based on surface plasmon resonance (SPR) using protein G was developed for the detection of Salmonella typhimurium. A protein G layer was fabricated by binding chemically to self-assembly monolayer (SAM) of 11-mercaptoundecanoic acid (MUA) on gold (Au) surface. The formation of protein G layer on Au surface modified with 11-MUA and the binding of antibody and antigen in series were confirmed by SPR spectroscopy. The effect of detergent such as Tween-20 on binding efficiency of antibody and antigen was investigated by SPR. The binding efficiency of antigen to the antibody immobilized on Au surface was improved up to about 85% and 100% by using protein G and Tween-20, respectively. The surface morphology analyses of 11-MUA monolayer on Au substrate, protein G layer on 11-MUA monolayer and antibody layer immobilized on protein G layer were performed by atomic force microscope (AFM). Consequently, an immunosensor based on SPR for the detection of S. typhimurium using protein G was developed with a detection range of 10(2) to 10(9)CFU/ml. The current fabrication technique of a SPR immunosensor for the detection of S. typhimurium could be applied to construct other immnosensors or protein chips.     

A survey of the 2001 to 2005 quartz crystal microbalance biosensor literature: applications of acoustic physics to the analysis of biomolecular interactions

The widespread exploitation of biosensors in the analysis of molecular recognition has its origins in the mid-1990s following the release of commercial systems based on surface plasmon resonance (SPR). More recently, platforms based on piezoelectric acoustic sensors (principally 'bulk acoustic wave' (BAW), 'thickness shear mode' (TSM) sensors or 'quartz crystal microbalances' (QCM)), have been released that are driving the publication of a large number of papers analysing binding specificities, affinities, kinetics and conformational changes associated with a molecular recognition event. This article highlights salient theoretical and practical aspects of the technologies that underpin acoustic analysis, then reviews exemplary papers in key application areas involving small molecular weight ligands, carbohydrates, proteins, nucleic acids, viruses, bacteria, cells and lipidic and polymeric interfaces. Key differentiators between optical and acoustic sensing modalities are also reviewed.     

Immobilization of biocomponents for immune optical sensors

Immobilisation of both human immunoglobulin(IgG) and antiimmunoglobulin (anti-IgG) was performed by means of polyelectrolyte self-assembly. This technique was compared with direct immobilisation of the immune components on bare gold and their covalent binding via glutaraldehyde as a bifunctional reagent. Additionally, the immune components were properly oriented during their immobilisation by using a predeposited layer of the protein A. Methods of the surface plasmon resonance (SPR) and planar interferometry were employed for monitoring the immobilisation as well as specific immune reaction. It was shown that in case of the use of polyelectrolyte self-assembly it is possible to achieve the sensitivity of the analysis up to 30 ng/ml for SPR and up to 1 ng/ml for planar interferometer based immune sensors.     

A vesicle capture sensor chip for kinetic analysis of interactions with membrane-bound receptors

A novel sensor chip for use in surface plasmon resonance (SPR) biosensors has been developed to capture vesicles which may contain membrane-bound receptors. Sulforhodamine-containing vesicles were shown by fluorescence microscopy to be immobilized intact on the sensor chip. Binding of cholera toxin to captured vesicles containing ganglioside GM(1) was demonstrated using SPR, and the derived kinetic and affinity constants were similar to literature values. Biotinylated vesicles captured on the sensor chip were used to bind streptavidin and then biotinylated ss-DNA. The hybridization of complementary ss-DNA to the immobilized ss-DNA was then analyzed using SPR. The values obtained were similar to those obtained for an identical interaction analyzed using a commercially available streptavidin-containing sensor chip. Binding of vancomycin-group antibiotics to captured vesicles containing a bacterial cell wall mucopeptide analogue was demonstrated. No binding of the bacterial endotoxin Cry1A(c) to captured vesicles containing its cell surface receptor could be demonstrated.     

Surface plasmon resonance detection of interactions between peptide fragments of N-telopeptide and its monoclonal antibodies.

As populations age, osteoporosis is becoming an important public health care problem. Urinary level of the cross-linked N-telopeptide of type I collagen has been reported to be a sensitive marker of bone resorption. Recently, we synthesized and characterized 10 overlapping peptides covering the N-telopeptide of alpha-2 type I collagen and reported their relative binding response to anti-type I collagen cross-linked N-telopeptide (NTX) antibodies determined by a competitive-inhibition enzyme-linked immunosorbent assay (ELISA). In this study, we design an assay based on the surface plasmon resonance (SPR) technology to detect binding interaction of each peptide fragment of NTX with the anti-NTX monoclonal antibodies. Anti-NTX monoclonal antibodies were immobilized on the surface of sensor chip by amine-coupling procedure. Serial dilutions of each peptide were prepared and injected separately onto the antibodies-immobilized sensor chip. The real-time association and dissociation interactions of each peptide were detected and reported as sensorgrams. Binding response of each peptide to the monoclonal antibodies was determined, and the SPR results were compared with the ELISA results. We demonstrate that the trends of binding potency of peptide fragments detected by SPR are in good correlation to the results obtained by ELISA, indicating that our developed SPR-based method can be further applied to detect the NTX fragments in urine and to monitor the bone loss in humans. The potent peptide fragments identified by both assays are promising for further preparation of specific monoclonal antibodies in order to develop bioassays for bone loss in humans.     

Utilization of an Enantioselective Surface Plasmon Resonance Electrode for the Selection of the Best C70 Fullerene as Chiral Selector for the Enantioanalysis of L-Cysteine

Abstract

Two novel enantioselective surface plasmon resonance (SPR) sensors based on self-assembled monolayer of (5-6)-fullerene-C₇₀ and diethyl (1,2-methanofullerene C₇₀)-71-71-dicarboxylate as chiral selectors are proposed. Binding assay, apparent affinity constant, and apparent dissociation binding constant have been used to analyze and study the enantioselectivity of C₇₀ fullerene-octadecanethiol film for L-cysteine which was chosen as model analyte. The apparent affinity constant for the complex formed by L-cysteine with (5-6)-fullerene-C₇₀ and diethyl (1,2-methanofullerene C₇₀)-71-71-dicarboxylate films were 1 × 10¹⁰ L/mol, and 6.7 × 10⁸ L/mol, respectively. Accordingly, the chiral selector of choice will be (5-6)-fullerene-C₇₀. No binding was recorded between any of the tested C₇₀ fullerenes and D-cysteine, this proving the enantioselectivity of the proposed SPR sensors.     

Sensitivity enhancement of optical immunosensors by the use of a surface plasmon resonance fluoroimmunoassay

Optical immunosensors employing evanescent wave techniques have the potential to address the requirements of the 'alternative site' market; however, this potential has yet to be realised. The development of 'direct' sensors, such as those using surface plasmon resonance (SPR), has been hampered by problems of non-specific binding and poor sensitivity to small molecules. 'Indirect' sensors (for example, those employing a fluorescently labelled reagent) overcome many of the problems of direct sensors but require more sophisticated instrumentation because of the low light levels detected. In an attempt to combine the best features of the two techniques, an indirect SPR fluoroimmunoassay (SPRF) technique has been investigated. The surface field intensity enhancement produced by SPR is used to boost the emission from a fluorescently labelled immunoassay complex at a metal surface. The potential of the method is demonstrated by assaying for human Chorionic Gonadotrophin (hCG) in serum. Enhanced sensitivity over conventional total internal reflection fluorescence (TIRF) and SPR techniques was achieved.     

Fabrication of self-assembled protein A monolayer and its application as an immunosensor

The self-assembled layer of modified protein A was fabricated. In order to modify protein A, the surface group of protein A was substituted with thiol (-SH) functionality by using N-succinimidyl-3-(2-pyridyldithio)propionate (SPDP) and dithiothreitol (DTT). The formation of a self-assembled protein A layer on a Au substrate and its increased binding capacity to antibody were confirmed by surface plasmon resonance (SPR) spectroscopy. The surface structure of self-assembled protein A layer, and the binding status of anti-bovine serum albumin (anti-BSA) and BSA were determined by atomic force microscopy (AFM). Treatment on the self-assembled protein A layer with a detergent, such as Tween 20, increased the binding capacity of anti-BSA, because protein A aggregation was reduced significantly by the detergent; this was confirmed by SPR spectroscopy. The self-assembled layer of chemically modified protein A with enhanced binding capacity can be used for immunosensor fabrication.     

Immunosensor for detection of Legionella pneumophila using surface plasmon resonance

Immunosensor using surface plasmon resonance (SPR) onto self-assembled protein G layer was developed for the detection of Legionella pneumophila. A self-assembled protein G layer on gold (Au) surface was fabricated by adsorbing a mixture of 11-mercaptoundecanoic acid (MUA) and hexanethiol (molar ratio of 1:2) and the activation process for chemical binding between free amine (-NH(2)) of protein G and 11-(MUA) using 1-ethyl-3-(3-dimethylaminopropyl)carbodiimide hydrochloride (EDAC) in series. The formation of self-assembled protein G layer on Au substrate and the binding of antibody and antigen in series were confirmed by SPR spectroscopy. The surface morphology analyses of self-assembled protein G layer on Au substrate and monoclonal antibody against L. pneumophila immobilized on protein G were performed by atomic force microscope (AFM). The immunosensor for detection of L. pneumophila using SPR was developed and its detection limit could find up to 10(5) cells/ml.     

Butyrylcholinesterase activity and molecular components in thymus of healthy and merosin-deficient Lama2dy mice

The laminin-alpha2 chain, referred to as merosin, forms part of the laminin-2 heterotrimer (alpha2beta1gamma1), which is principally expressed in the basement membrane of muscle. Nearly half of patients suffering from congenital muscular dystrophy (CMD) have abnormalities in the laminin-alpha2 chain (LAMA2) gene, and the merosin-deficient Lama2dy mouse shows CMD. The expression of merosin in thymus, the abnormalities in the gland of Lama2dy mice, and the presence of acetylcholinesterase (AChE) and butyrylcholinesterase (BuChE) in thymus prompted us to study the possible effects of the deficiency of merosin on thymus BuChE. We found that, while AChE activity decreased by approximately 50% in merosin-deficient thymus, the deficiency had little effect on BuChE activity. About 65% of thymus BuChE activity was extracted with a saline buffer and 30% with 1% Triton X-100. Sedimentation analyses and phenyl-agarose chromatography showed that thymus contained amphiphilic BuChE monomers (G(1)(A),44%) and dimers (G(2)(A),33%), and hydrophilic tetramers (G(4)(H),23%). Binding assays with various plant lectins revealed differences between the oligoglycans linked to BuChE tetramers and lighter components. The deficiency of merosin had no effect on the biosynthesis of thymus BuChE as judged by the lack of major changes between control and Lama2dy mice thymuses in the distribution of BuChE molecules and the level of lectin binding. The detoxifying action of BuChE, its role as a backup to AChE, and the relevance of the cholinergic dialogue between T cells and stromal cells for T lymphocyte proliferation, maturation and survival support a physiological function for BuChE in thymus.     

Surface plasmon resonance immunosensor using self-assembled protein G for the detection of Salmonella paratyphi

A surface plasmon resonance (SPR) based immunosensor using self-assembled protein G was developed for the detection of Salmonella paratyphi. In order to endow a solid substrate binding affinity to protein G, the free amine (-NH2) of protein G was substituted into thiol (-SH) using 2-iminothiolane. Thus, self-assembled protein G was fabricated on gold (Au) substrate. The formation of protein G layer on Au surface, and the binding of antibody and antigen in series were confirmed by SPR spectroscopy. The surface morphology analysis of the protein G layer on Au surface was performed by atomic force microscope (AFM). Consequently, an immunosensor based on SPR for the detection of S. paratyphi using self-assembled protein G was developed with a detection range of 10(2)-10(7) CFU/ml. The current fabrication technique of a SPR immunosensor for the detection of S. paratyphi could be applied to construct other immnosensors or protein chips.     

Direct detection of acetylcholinesterase inhibitor binding with an enzyme-based surface plasmon resonance sensor

Acetylcholinesterase (AChE) inhibitors are potentially lethal but also have applications as therapeutic drugs for neurodegenerative diseases such as Alzheimer’s. Enzyme inhibitor binding are difficult to be detected directly by surface plasmon resonance (SPR) due to their small molecular weight. In this article, we describe the detection of AChE inhibitor binding by SPR without the use of competitive binding or antibodies. AChE was immobilized on the gold surface of an SPR sensor through covalent attachment to a self-assembled monolayer (SAM) of a COOH-terminated alkanethiol. The activity of the immobilized protein and the surface density were determined by using a standard photometric assay. Binding of two reversible inhibitors, which are used as therapeutic drugs, was detectable by SPR without the need to further modify the surface or the use of other reagents. The binding affinities (K_A) obtained from the fits were 3.8 × 10³ M⁻¹ for neostigmine and 1.7 × 10³ M⁻¹ for eserine, showing a higher affinity of the sensor for neostigmine. We believe that the SPR sensor’s ability to detect these inhibitors is due to conformational changes of the enzyme structure on inhibitor binding.     

Real-time analysis of ligand-induced cell surface and intracellular reactions of living mast cells using a surface plasmon resonance-based biosensor

Surface plasmon resonance (SPR)-based sensors have been used to detect the binding between interactive molecules. We applied the SPR technology to the analysis of interactions between living cells and molecules reactive to the cells, using mast cells and mast cell-reactive antigens. The exposure of dinitrophenol-human serum albumin (DNP-HSA), an antigen that stimulates mast cells, to IgE-sensitized mast cells induced a robust and long-lasting SPR signal in a dose-dependent manner. The maximal increase in SPR signal induced by 100 ng/ml DNP-HSA was 0.200 +/- 0.120 angle (mean +/- SD, n = 37), about 1000 times larger than the theoretically expected increase for the simple binding of DNP-HSA to Fc(epsilon)RI, the high-affinity IgE receptor. A small, but similarly prolonged signal was observed when the cells were stimulated by an agonist of the adenosine A3 receptor. The signal induced by DNP-HSA was abolished by genistein, and partially inhibited by phorbol 12-myristate 13-acetate and wortmannin. Interestingly, the signal induced by DNP-HSA was only weakly inhibited by DNP-lysine, suggesting that DNP-lysine manifests its action not by inhibiting, but by modulating the crosslinking of Fc(epsilon)RI. We concluded that SPR sensors can detect biologically significant signals in a real-time manner from the interactions between cells and molecules reactive to the cells.     

Surface engineering: optimization of antigen presentation in self-assembled monolayers.

The formation of self-assembled monolayers (SAMs) on gold surfaces containing an antigenic peptide (NANP)6 and HS(CH2)11OH, and the specific binding of a monoclonal antibody to these layers were investigated by surface plasmon resonance (SPR). Peptides were synthesized by solid-state phase synthesis and were linked either to cysteine or to an alkyl-thiol to allow covalent attachment to gold. The content of the peptide in the SAMs was systematically varied, and the binding properties of the monoclonal antibody were compared with those measured by microcalorimetry in solution. At a critical peptide concentration in the SAM an optimal antibody binding and complete surface coverage was attained. At lower peptide concentrations, the amount of adsorbed antibody decreased; at higher peptide concentrations, the binding constant decreased. These effects can be explained if the accessibility of the antigenic epitopes depends on the peptide density. Addition of free antigen induced the desorption of bound antibodies and allowed accurate measurements of the dissociation rate constant. Binding constants obtained from steady-state measurements and from measurements of the kinetic rate constants were compared.     

Novel carbamate derivatives as selective butyrylcholinesterase inhibitors

Selective butyrylcholinesterase inhibitors could be the promising drug candidates, used in treatment of Alzheimer's disease. The study describes the synthesis and biological activity of novel carbamate derivatives with N-phenylpiperazine, N-benzylpiperazine and 4-benzylpiperidine moieties. Biological studies revealed that most of these compounds displayed significant activity against BuChE. Compound 16 (3-(4-phenyl-piperazin-1-ylmethyl)-phenyl phenylcarbamate) turned out to be the most active (IC₅₀ = 2.00 μM for BuChE). For all synthesized compounds lipophilicity and other physicochemical properties were calculated using computer programs. Relationship between these properties and activity was also checked. Binding mode with enzyme and the ensuing differences in activity were explained by the molecular modeling studies.     

Adsorption of dansylated amino acids on molecularly imprinted surfaces: a surface plasmon resonance study

Surface plasmon resonance spectroscopy (SPR) was used to measure the adsorption kinetics and isotherms of dansylated amino acids onto surface-confined molecularly imprinted polymer films (MIP-Fs) and the corresponding non-imprinted polymer control films (NIP-Fs). The surface-confined polymer films were grafted from flat gold surfaces using atom transfer radical polymerization (ATRP). This approach allowed uniform nanothin films to be grown, thereby ensuring that the amino acids see a uniform surface during adsorption. N,N'-Didansyl-l-cystine (DDC) and didansyl-l-lysine (DDK) were used as the template molecules to form the MIP-Fs. Adsorption kinetics data were analyzed using single- and dual-site Langmuir adsorption models. It was found that, within the experimental measurement range, adsorption isotherm data were well described by any of four isotherm models: Langmuir, dual-site Langmuir, Freundlich, or Langmuir-Freundlich (LF). The relatively high heterogeneity index values regressed using the Freundlich and LF isotherms suggest the formation of fairly homogeneous MIP-Fs; although Scatchard analysis reveals binding site heterogeneity does exist. Selectivity studies showed that the MIP-Fs display cross-reactivity between DDC and DDK; nevertheless, MIP-Fs prepared against one template showed selectivity for that template. Solution pH and polymer layer thickness were studied as independent parameters to determine their impacts on amino acid adsorption, as monitored by SPR.