Tetraplex structure formation in the thrombin-binding DNA aptamer by metal cations measured by vibrational spectroscopy

Formation of intramolecular tetraplex structures by the thrombin-binding DNA aptamer (TBA) in the presence of K(+), Pb(2+), Ba(2+), Sr(2+) and Mn(2+) has been studied by vibrational spectroscopy. All tetraplex structures contain G-G Hoogsteen type base pairing, both C2'endo/anti and C2'endo/syn deoxyguanosine glycosidic conformations and local B like form DNA phosphate geometries. Addition of Pb(2+) ions modifies the structure by interacting at the level of the guanine carbonyl groups. The very important downshift of the guanine C6=O6 carbonyl vibration mode in the TBA spectrum induced by the addition of one Pb(2+) ion per TBA molecule is in agreement with a localization of the metal ion between both guanine quartets. FTIR melting experiments show an important stabilization of the tetraplex structure upon addition of Pb(2+) ions (DeltaT = 15 degrees C). This strong interaction of lead cations may be correlated with a change in the geometry of the cage formed by the two guanine quartets. A similar but weaker effect is observed for barium and strontium cations.     

Guanine tetraplex topology of human telomere DNA is governed by the number of (TTAGGG) repeats

Secondary structures of the G-rich strand of human telomere DNA fragments G₃(TTAG₃)_n, n = 1–16, have been studied by means of circular dichroism spectroscopy and PAGE, in solutions of physiological potassium cation concentrations. It has been found that folding of these fragments into tetraplexes as well as tetraplex thermostabilities and enthalpy values depend on the number of TTAG₃ repeats. The suggested topologies include, e.g. antiparallel and parallel bimolecular tetraplexes, an intramolecular antiparallel tetraplex, a tetraplex consisting of three parallel chains and one antiparallel chain, a poorly stable parallel intramolecular tetraplex, and both parallel and antiparallel tetramolecular tetraplexes. G₃(TTAG₃)₃ folds into a single, stable and very compact intramolecular antiparallel tetraplex. With an increasing repeat number, the fragment tetraplexes surprisingly are ever less thermostable and their migration and enthalpy decrease indicate increasing irregularities or domain splitting in their arrangements. Reduced stability and different topology of lengthy telomeric tails could contribute to the stepwise telomere shortening process.     

Tetraplex folding of telomere sequences and the inclusion of adenine bases.

Telomeres are required for eukaryotic chromosome stability. They consist of regularly repeating guanine-rich sequences, with a single-stranded 3' terminus. Such sequences have been demonstrated to have the propensity to adopt four-stranded structures based on a tetrad of guanine bases. The formation of an intramolecular foldback tetraplex is associated with markedly increased mobility in polyacrylamide. Most telomeric sequences are based either on a repeat of d(TnGGGG) or d(TnAGGG) sequences. We have used a combination 7-deazaguanine or 7-deaza-adenine substitution, chemical modification and gel electrophoresis to address the following aspects of intramolecular tetraplex formation. (i) Intramolecular tetraplex formation by d(TTTTGGGG)4 sequences is prevented by very low levels of 7-deazaguanine substitution. This confirms the important role of guanine N7 in the formation of the tetraplex. (ii) The sequences d(TTAGGG)4 and d(TTTTAGGG)4 fold into tetraplexes. By contrast, the electrophoretic behaviour of d(TTTTGGGA)4, d(TTTTAGAG)4 and d(TTTTGAGA)4 does not indicate formation of stable intramolecular tetraplexes under available conditions. (iii) Selective 7-deazaguanine and 7-deaza-adenine substitutions in d(TTTTAGGG)4 give results consistent with tetraplex folding by the formation of three G4 tetrads, with the adenine bases formally part of the single-stranded loops, where they probably interact with thymine bases. These results demonstrate that eukaryotic cells appear to have selected just those sequences that can adopt the tetraplex conformation for their telomeres, while those that cannot have been avoided. This suggests that the conformation may be significant in the function of the telomere, such as attachment to nuclear structures.     

Tetraplex formation of d(GGGGGTTTTT): 1H NMR study in solution.

The oligonucleotide d(G5T5) can in principle form a fully matched duplex with G.T pairing and/or a tetraplex. Non-denaturing gel electrophoresis, circular dichroism and NMR experiments show that the tetraplex is exclusively formed by this oligomer in solution. In the presence of its complementary strand d(A5C5) at low temperature, d(G5T5) forms the tetraplex over the normally expected Watson-Crick duplex. However, when d(G5T5) and d(A5C5) are mixed together in equimolar amounts and heated for several minutes at 85 degrees C, and then allowed to cool, the product was essentially the Watson-Crick duplex. The lack of resolution in the 500 MHz 1H NMR spectra and the presence of extensive spin diffusion do not allow us to derive a quantitative structure for the tetraplex from the NMR data. However, we find good qualitative agreement between the NOESY and MINSY data and a theoretically derived stereochemically sound structure in which the G's and T's are part of a parallel tetraplex.     

Conformation and thermostability of oligonucleotide d(GGTTGGTGTGGTTGG) containing thiophosphoryl internucleotide bonds at different positions

The thrombin-binding aptamer d(GGTTGGTGTGGTTGG) (TBA) is an efficient tool for the inhibition of thrombin function. We have studied conformations and thermodynamic stability of a number of modified TBA oligonucleotides containing thiophosphoryl substitution at different internucleotide sites. Using circular dichroism such modifications were found not to disrupt the antiparallel intramolecular quadruplex specific for TBA. Nevertheless, the presence of a single thiophosphoryl bond between two G-quartet planes led to a significant decrease in the quadruplex thermostability. On the contrary, modifications in each of the loop regions either stabilized an aptamer structure or did not reduce its stability. According to the thrombin time test, the aptamer with thio-modifications in both TT loops (LL11) exhibits the same antithrombin efficiency as the original TBA. This aptamer shows better stability against DNA nuclease compared to that of TBA. We conclude that such thio-modification patterns are very promising for the design of anticoagulation agents.     

Structural study of an RNA aptamer for a Tat protein complexed with ligands.

An RNA aptamer for an HIV Tat protein has been isolated by the in vitro SELEX method. The RNA aptamer binds to the Tat protein 50-100 times more strongly than native TAR RNA does. Here, we have investigated the structure of the RNA aptamer complexed with ligands, partial peptide fragments of the Tat protein or argininamide, by multidimensional 1H/13C/15N NMR. It is strongly suggested that two U:A:U base triples are formed in the RNA aptamer upon binding of ligands. Specific hydrogen bonds between arginine side chains of ligands and guanine bases located adjacent to the base triples are identified. On the basis of many intramolecular and intermolecular NOEs, a structural model of the complex has been constructed.     

A hairpin DNA aptamer coupled with groove binders as a smart switch for a field-effect transistor biosensor

We report here that a hairpin-structured DNA that possesses an anti-ATP aptamer sequence successfully detected target ATP or adenosine in a temperature-dependent manner by nanoscale intramolecular displacement on the surface of a gold electrode as an extended gate of a field-effect transistor (FET). The structural switching of the hairpin aptamer from closed loop to open-loop conformations was accompanied by the release of the preloaded DNA binder (DAPI) from the stem part of the hairpin aptamer into the solution phase. The loss of intrinsic positive charges of DAPI (2+) from the diffusion layer at the gate/solution nano-interface as a result of target capturing was responsible for generating a specific signal by the field-effect. We emphasize a new aspect of the structured DNA aptamer in combination with FET: the DAPI-loaded hairpin aptamer successfully detected even uncharged adenosine, which remains a major challenge for FET-based biosensors. Given the simplicity in design of the primary and secondary structures of oligonucleotide aptamers, it is easy to apply this technology to a wide variety of bio-analytes, irrespective of their electric charges. In view of these advantages, our findings may offer a new trend in the design of stimuli-responsive "smart" biomolecular switches for semiconductor-based biosensors.     

Tetraplex Formation of d(GGGGGTTTTT): 1H NMR Study in Solution

Abstract

The oligonucleotide d(G₅T₅) can in principle form a fully matched duplex with G · T pairing and/or a tetraplex. Non-denaturing gel electrophoresis, circular dichroism and NMR experiments show that the tetraplex is exclusively formed by this oligomer in solution. In the presence of its complementary strand d(A₅C₅) at low temperature, d(G₅T₅) forms the tetraplex over the normally expected Watson-Crick duplex. However, when d(G₅T₅) and d(A₅C₅) are mixed together in equimolar amounts and heated for several minutes at 85°C, and then allowed to cool, the product was essentially the Watson-Crick duplex. The lack of resolution in the 500 MHz ¹H NMR spectra and the presence of extensive spin diffusion do not allow us to derive a quantitative structure for the tetraplex from the NMR data. However, we find good qualitative agreement between the NOESY and MINSY data and a theoretically derived stereochemically sound structure in which the G's and T's are part of a parallel tetraplex.     

Conformational properties of DNA containing (CCA)n and (TGG)n trinucleotide repeats

We have used CD spectroscopy, polyacrylamide gel electrophoresis, and UV absorption spectroscopy to study conformational properties of DNA fragments containing (CCA)n and (TGG)n repeats, which are the most length-polymorphic microsatellite sequences of the human genome. The (CCA)n fragments are random single strands at neutral and alkaline pH but they fold into intramolecular intercalated cytosine tetraplexes at mildly acid pH values. More acid values stabilize intermolecular tetraplex formation. The behavior of (TGG)n repeats is more complex. They form hairpins or antiparallel homoduplexes in low salt solutions which, however, are transformed into parallel-stranded guanine tetraplexes at physiological KCl concentrations. Their molecularity depends on the repeat number: (TGG)4 associates into an octameric complex, (TGG)8 forms tetramolecular complexes. (TGG)n with odd repeat numbers (5, 7, and 9) generate bimolecular and tetramolecular tetraplexes. The only (TGG)7 folds into an intramolecular tetraplex at low KCl concentrations, which is antiparallel-stranded. Moreover, the (TGG)(n) fragments provide various mutually slipped conformers whose population increases with salt concentration and with the increasing repeat number. However, the self-structures of both strands disappear in the presence of the complementary strand because both (TGG)n and (CCA)n prefer to associate into the classical heteroduplex. We suppose that the extreme conformational variability of the DNA strands stands behind the length polymorphism which the (CCA)n/(TGG)n repeats exhibit in the human genome.     

Tetraplex formation of surface-immobilized human telomere sequence probed by surface plasmon resonance using single-stranded DNA binding protein

Many sequences in genomic DNA are able to form unique tetraplex structures. Such structures are involved in a variety of important cellular processes and are emerging as a new class of therapeutic targets for cancers and other diseases. Screening for molecules targeting the tetraplex structure has been explored using such sequences immobilized on solid surfaces. Immobilized nucleic acids, in certain situations, may better resemble the molecules under in vivo conditions. In this report, we studied the formation of tetraplex structure of both the G-rich and C-rich strands of surface-immobilized human telomere sequence by surface plasmon resonance using the single-stranded DNA binding protein from Escherichia coli as probe. We demonstrate how the formation of G-quadruplex and i-motif could be probed under various conditions by this sequence-universal method. Our results also show that immobilization destabilized the tetraplex structure.     

Tetraplex structure of fission yeast telomeric DNA and unfolding of the tetraplex on the interaction with telomeric DNA binding protein Pot1

To understand the regulation mechanism of fission yeast telomeric DNA, we analysed the structural properties of Gn: d(GnTTAC) (n=2-6) and 4Gn: d(GnTTAC)4 (n=3 and 4), and their interaction with the single-stranded telomeric DNA binding domain of telomere-binding protein Pot1 (Pot1DBD). G4, G5 and G6 formed a parallel tetraplex in contrast with no tetraplex formation by G2 and G3. Also, 4G4 adopted only an antiparallel tetraplex in spite of a mixture of parallel and antiparallel tetraplexes of 4G3. The variety of tetraplex structures was governed by the number of consecutive guanines in a single copy and the number of repeats. The antiparallel tetraplex of 4G4 became unfolded upon the interaction with Pot1DBD. The interaction with mutant Pot1DBD proteins revealed that the ability to unfold the antiparallel tetraplex was strongly correlated with the specific binding affinity for the single-stranded telomeric DNA. The result suggests that the decrease in the free single strand upon the complex formation with Pot1DBD may shift the equilibrium from the tetraplex to the single strand, which may cause the tetraplex unfolding. Considering that the antiparallel tetraplex inhibits telomerase-mediated telomere elongation, we conclude that the ability of Pot1 to unfold the antiparallel tetraplex is required for telomerase-mediated telomere regulation.     

Guanine tetraplex formation by short DNA fragments containing runs of guanine and cytosine.

Using CD spectroscopy, guanine tetraplex formation was studied with short DNA fragments in which cytosine residues were systematically added to runs of guanine either at the 5' or 3' ends. Potassium cations induced the G-tetraplex more easily with fragments having the guanine run at the 5' end, which is just an opposite tendency to what was reported for (G+T) oligonucleotides. However, the present (G+C) fragments simultaneously adopted other conformers that complicated the analysis. We demonstrate that repeated freezing/thawing, performed at low ionic strength, is a suitable method to exclusively stabilize the tetraplex in the (G+C) DNA fragments. In contrast to KCl, the repeated freeze/thaw cycles better stabilized the tetraplex with fragments having the guanine run on the 3' end. The tendency of guanine blocks to generate the tetraplex destabilized the d(G5).d(C5) duplex whose strands dissociated, giving rise to a stable tetraplex of (dG5) and single-stranded (dC5). In contrast to d(G3C3) and d(G5C5), repeated freezing/thawing induced the tetraplex even with the self-complementary d(C3G3) or d(C5G5); hence the latter oligonucleotides preferred the tetraplex to the apparently very stable duplex. The tetraplexes only included guanine blocks while the 5' end cytosines interfered neither with the tetraplex formation nor the tetraplex structure.     

Dependence of aptamer activity on opposed terminal extensions: improvement of light-regulation efficiency

Aptamers that can be regulated with light allow precise control of protein activity in space and time and hence of biological function in general. In a previous study, we showed that the activity of the thrombin-binding aptamer HD1 can be turned off by irradiation using a light activatable ‘caged’ intramolecular antisense-domain. However, the activity of the presented aptamer in its ON state was only mediocre. Here we studied the nature of this loss in activity in detail and found that switching from 5′- to 3′-extensions affords aptamers that are even more potent than the unmodified HD1. In particular we arrived at derivatives that are now more active than the aptamer NU172 that is currently in phase 2 clinical trials as an anticoagulant. As a result, we present light-regulatable aptamers with a superior activity in their ON state and an almost digital ON/OFF behavior upon irradiation.     

Human werner syndrome DNA helicase unwinds tetrahelical structures of the fragile X syndrome repeat sequence d(CGG)n

Formation of hairpin and tetrahelical structures by a d(CGG) trinucleotide repeat sequence is thought to cause expansion of this sequence and to engender fragile X syndrome. Here we show that human Werner syndrome DNA helicase (WRN), a member of the RecQ family of helicases, efficiently unwinds G'2 bimolecular tetraplex structures of d(CGG)7. Unwinding of d(CGG)7 by WRN requires hydrolyzable ATP and Mg2+ and is proportional to the amount of added helicase and to the time of incubation. The efficiencies of unwinding of G'2 d(CGG)7 tetraplex with 7 nucleotide-long single-stranded tails at their 3' or 5' ends are, respectively, 3.5- and 2-fold greater than that of double-stranded DNA. By contrast, WRN is unable to unwind a blunt-ended d(CGG)7 tetraplex, bimolecular tetraplex structures of a telomeric sequence 5'-d(TAGACATG(TTAGGG)2TTA)-3', or tetramolecular quadruplex forms of an IgG switch region sequence 5'-d(TACAGGGGAGCTGGGGTAGA)-3'. The ability of WRN to selectively unwind specific tetrahelices may reflect a specific role of this helicase in DNA metabolism.     

Engineering a structure switching mechanism into a steroid-binding aptamer and hydrodynamic analysis of the ligand binding mechanism

The steroid binding mechanism of a DNA aptamer was studied using isothermal titration calorimetry (ITC), NMR spectroscopy, quasi-elastic light scattering (QELS), and small-angle X-ray spectroscopy (SAXS). Binding affinity determination of a series of steroid-binding aptamers derived from a parent cocaine-binding aptamer demonstrates that substituting a GA base pair with a GC base pair governs the switch in binding specificity from cocaine to the steroid deoxycholic acid (DCA). Binding of DCA to all aptamers is an enthalpically driven process with an unfavorable binding entropy. We engineered into the steroid-binding aptamer a ligand-induced folding mechanism by shortening the terminal stem by two base pairs. NMR methods were used to demonstrate that there is a transition from a state where base pairs are formed in one stem of the free aptamer, to where three stems are formed in the DCA-bound aptamer. The ability to generate a ligand-induced folding mechanism into a DNA aptamer architecture based on the three-way junction of the cocaine-binding aptamer opens the door to obtaining a series of aptamers all with ligand-induced folding mechanisms but triggered by different ligands. Hydrodynamic data from diffusion NMR spectroscopy, QELS, and SAXS show that for the aptamer with the full-length terminal stem there is a small amount of structure compaction with DCA binding. For ligand binding by the short terminal stem aptamer, we propose a binding mechanism where secondary structure forms upon DCA binding starting from a free structure where the aptamer exists in a compact form.     

Fission yeast telomeric DNA binding protein Pot1 has the ability to unfold tetraplex structure of telomeric DNA

To understand the regulation mechanism of fission yeast telomeric DNA, we analyzed the structural properties of 4Gn: d(G(n)TTAC)(4) (n = 3, 4) and their interaction with the single-stranded telomeric DNA binding domain of telomere-binding protein Pot1 (Pot1DBD). 4G4 adopted only an antiparallel tetraplex in spite of a mixture of parallel and antiparallel tetraplexes of 4G3. The antiparallel tetraplex of 4G4 became unfolded upon the interaction with Pot1DBD. Considering that the antiparallel tetraplex inhibits telomerase-mediated telomere elongation, we conclude that the ability of Pot1 to unfold the antiparallel tetraplex is required for telomerase-mediated telomere regulation.     

Self-assembly of coiled-coil tetramers in the 1.40 A structure of a leucine-zipper mutant

The hydrophobic core of the GCN4 leucine-zipper dimerization domain is formed by a parallel helical association between nonpolar side chains at the a and d positions of the heptad repeat. Here we report a self-assembling coiled-coil array formed by the GCN4-pAe peptide that differs from the wild-type GCN4 leucine zipper by alanine substitutions at three charged e positions. GCN4-pAe is incompletely folded in normal solution conditions yet self-assembles into an antiparallel tetraplex in crystals by formation of unanticipated hydrophobic seams linking the last two heptads of two parallel double-stranded coiled coils. The GCN4-pAe tetramers in the lattice associate laterally through the identical interactions to those in the intramolecular dimer-dimer interface. The van der Waals packing interaction in the solid state controls extended supramolecular assembly of the protein, providing an unusual atomic scale view of a mesostructure.     

In vitro selection of molecular beacons

While molecular beacons are primarily known as biosensors for the detection of nucleic acids, it has proven possible to adapt other nucleic acid binding species (aptamers) to function in a manner similar to molecular beacons, yielding fluorescent signals only in the presence of a cognate ligand. Unfortunately, engineering aptamer beacons requires a detailed knowledge of aptamer sequence and structure. In order to develop a general method for the direct selection of aptamer beacons we have first developed a selection method for molecular beacons. A pool of random sequence DNA molecules were immobilized via a capture oligonucleotide on an affinity column, and those variants that could be released from the column by a target oligonucleotide were amplified. After nine rounds of selection and amplification the elution characteristics of the population were greatly improved. A fluorescent reporter in the selected beacons was located adjacent to a DABCYL moiety in the capture oligonucleotide; addition of the target oligonucleotide led to release of the capture oligonucleotide and up to a 17-fold increase in fluorescence. Signaling was specific for the target oligonucleotide, and occurred via a novel mechanism, relative to designed molecular beacons. When the target oligonucleotide is bound it can form a stacked helical junction with an intramolecular hairpin in the selected beacon; formation of the intramolecular hairpin in turn leads to release of the capture oligonucleotide. The ability to select molecular beacons may prove useful for identifying available sites on complex targets, such as mRNAs, while the method for selection can be easily generalized to other, non-nucleic acid target classes.     

Preferential binding of fd gene 5 protein to tetraplex nucleic acid structures

The gene 5 protein of filamentous bacteriophage fd is a single-stranded DNA-binding protein that binds non-specifically to all single-stranded nucleic acid sequences, but in addition is capable of specific binding to the sequence d(GT(5)G(4)CT(4)C) and the RNA equivalent r(GU(5)G(4)CU(4)C), the latter interaction being important for translational repression. We show that this sequence preference arises from the formation of a tetraplex structure held together by a central block of G-quartets, the structure of which persists in the complex with gene 5 protein. Binding of gene 5 protein to the tetraplex leads to formation of a approximately 170 kDa nucleoprotein complex consisting of four oligonucleotide strands and eight gene 5 protein dimers, with a radius of gyration of 45 A and an overall maximum dimension of 120-130 A. A model of the complex is presented that is consistent with the data obtained. It is proposed that the G-quartet may act as a nucleation site for binding gene 5 protein to adjacent single-stranded regions, suggesting a novel mechanism for translational repression.     

Dual-colour imaging of RNAs using quencher- and fluorophore-binding aptamers

In order to gain deeper insight into the functions and dynamics of RNA in cells, the development of methods for imaging multiple RNAs simultaneously is of paramount importance. Here, we describe a modular approach to image RNA in living cells using an RNA aptamer that binds to dinitroaniline, an efficient general contact quencher. Dinitroaniline quenches the fluorescence of different fluorophores when directly conjugated to them via ethylene glycol linkers by forming a non-fluorescent intramolecular complex. Since the binding of the RNA aptamer to the quencher destroys the fluorophore-quencher complex, fluorescence increases dramatically upon binding. Using this principle, a series of fluorophores were turned into fluorescent turn-on probes by conjugating them to dinitroaniline. These probes ranged from fluorescein-dinitroaniline (green) to TexasRed-dinitroaniline (red) spanning across the visible spectrum. The dinitroaniline-binding aptamer (DNB) was generated by in vitro selection, and was found to bind all probes, leading to fluorescence increase in vitro and in living cells. When expressed in E. coli, the DNB aptamer could be labelled and visualized with different-coloured fluorophores and therefore it can be used as a genetically encoded tag to image target RNAs. Furthermore, combining contact-quenched fluorogenic probes with orthogonal DNB (the quencher-binding RNA aptamer) and SRB-2 aptamers (a fluorophore-binding RNA aptamer) allowed dual-colour imaging of two different fluorescence-enhancing RNA tags in living cells, opening new avenues for studying RNA co-localization and trafficking.