Biodegradation of microcrystalline cellulose in pH–pH recyclable aqueous two-phase systems with water-soluble immobilized cellulase

Product inhibition is a barrier for enzymatic conversion of cellulose into reducing sugar in single aqueous phase. In addition, the difficulty in the recovery of cellulase also leads to high cost for the enzymatic hydrolysis of cellulose. In this study, enzymatic degradation of cellulose was carried out in pH–pH recyclable aqueous two-phase systems (ATPS) composed by copolymers poly (AA-co-DMAEMA-co-BMA) (abbreviated P_ADB3.8) and poly (MAA-co-DMAEMA-co-BMA) (abbreviated P_MDB). In the systems, cellulase was immobilized on pH-response copolymer P_MDB by using 1-Ethyl-3-(3-dimethyllaminopropyl)-carbodiimide hydrochloride (EDC) as cross-linker. Optimized partition coefficient of product in the systems was 2.45, in the presence of 40 mM (NH₄)₂SO₄. Insoluble substrate and immobilized enzyme were biased to bottom phase, while the product was partitioned to top phase. Microcrystalline cellulose was hydrolyzed into reducing sugar, and the product entered into top phase. The yield of saccharification in ATPS could reach 70.57% at the initial substrate concentration of 0.5% (w/v), and the value was 9.3% higher than that in the single aqueous phase. Saccharification yield could reach 66.15% after immobilized cellulase was recycled five times in ATPS.     

Biodegradation of cellulose in novel recyclable aqueous two-phase systems with water-soluble immobilized cellulase

Aqueous two-phase systems (ATPS) are an attractive technology in bioseparation engineering. However, one key problem is that phase-forming copolymer could not be recycled efficiently. This results in high cost and environmental pollution. In this study, we have developed recyclable aqueous two-phase systems composed by pH-response copolymer P_MDB and thermo-response copolymer P_NB and have carried out biodegradation of cellulose in the ATPS. The phase-forming copolymers could be recycled with over 95.0% recovery. In the systems, cellulase was immobilized on pH-response copolymer P_MDB by using 1-ethyl-3-(3-dimethyllaminopropyl)-carbodiimide hydrochloride as cross-linker, and optimized partition coefficient of product was 3.68. Insoluble substrate and immobilized enzyme were biased in bottom phase, while product was partitioned in top phase. Microcrystalline cellulose was catalyzed into reducing sugar, then the product entering into the top phase. In the end, inhibition of product was removed, and the yield of reducing sugar in ATPS was increased 10.94% compared with the reaction in the single aqueous phase. The saccharification in ATPS could reach 40.16% when the reaction reached equilibrium.     

Preliminary application of light-pH sensitive recycling aqueous two-phase systems to purification of lipase

One key problem of aqueous two-phase systems (ATPS) is that phase-forming polymers could not be recycled efficiently. This results in high cost and environmental pollution. In this study, we introduced novel aqueous two-phase systems which are composed by pH-sensitive polymer P_ADB and light-sensitive polymer P_NNC. P_NNC is enriched in the top phase while P_ADB is found in the bottom phase. And recoveries of two-phase-forming polymers can both reach over 96%. This aqueous two-phase system was used for purification of lipase from its crude material. The influences of various process parameters such as concentration of the phase-forming polymer, system pH, different types and concentrations of neutral salts on partitioning of lipase are evaluated. It has been found that partition coefficient of pure lipase could reach 0.061 under optimized conditions. Lipase from crude material was purified with 83.7% recovery and a purification factor of approximately 18 folds.     

Extraction and purification of anthraquinones derivatives from Aloe vera L. using alcohol/salt aqueous two-phase system

An alcohol/salt aqueous two-phase system (ATPS) composed of 1-propanol and (NH₄)₂SO₄ was employed to purify anthraquinones (AQs) extracted from Aloe vera L. The main influencing system parameters such as type of alcohol, type and concentration of salt, temperature and pH were investigated in detail. Under the optimal extraction conditions, AQs can be extracted into alcohol-rich phase with high extraction efficiency, meanwhile majority polysaccharides, proteins, mineral substances and other impurities were extracted into salt-rich phase. Partitioning of AQs is dependent on hydrophobic interaction, hydrogen bond interaction, and salting-out effect in ATPS. Temperature also played a great role in the partitioning. After ATPS extraction, alcohol can be recycled by evaporation; moreover, salt can be recycled by dilution crystallization method. Compared with other liquid–liquid extractions, this alcohol/salt system is much simpler, lower in cost with easier recovery of phase-forming components, which has the potential scale-up in down-processing of active ingredients in plant.     

Biodegradation of cellulose by β-glucosidase and cellulase immobilized on a pH-responsive copolymer

Biodegradation of cellulose involves synergistic action of the endoglucanases, exoglucanases and β-glucosidases in cellulase. However, the yield of glucose is limited by the lack of β-glucosidase to hydrolyze cellobiose into glucose. In this study, β-glucosidase as a supplemental enzyme along with cellulase are co-immobilized on a pHresponsive copolymer, poly (MAA-co-DMAEMA-co-BMA) (abbreviated P_MDB, where MAA is α-methacrylic acid, DMAEMA is 2-dimethylaminoethyl methacrylate and BMA is butyl methacrylate). The thermal and storage stabilities of PMDB with immobilized enzymes are improved greatly, compared with those of free cellulase. Biodegradation of cellulose is carried out in a pH-responsive recyclable aqueous two-phase system composed of poly (AA-co- DMAEMA-co-BMA) (abbreviated P_{ADB 3.8}, where AA is acrylic acid) and P_MDB. Insoluble substrate and P_MDB with immobilized cellulase and β-glucosidase (Celluclast 1.5L FG and Novozyme 188, respectively) were biased to the bottom phase, while the product was partitioned to the top phase in the presence of 40 mM (NH₄)₂SO₄. When the degradation reaction of cellulose is carried out with PMDB containing immobilized cellulase and β-glucosidase, the concentration of glucose reaches 4.331 mg/mL after 108 h. The yield of glucose is 50.25% after P_MDB containing the immobilized enzymes is recycled five times.     

Evaluation of recombinant phenylalanine dehydrogenase behavior in aqueous two-phase partitioning

Recombinant Bacillus sphaericus phenylalanine dehydrogenase (PheDH) partitioning was studied in polyethylene glycol (PEG) and ammonium sulfate aqueous two-phase systems (ATPS). The objectives of this work were to investigate influences; varying the molecular mass and concentration of PEG, pH, phase volume ratio (V_R), tie-line length (TLL) and concentration of (NH₄)₂SO₄ on the partition behavior of PheDH. It was revealed that the partitioning was not affected by V_R, while PEG molecular mass and concentration and (NH₄)₂SO₄ concentration had significant effects on enzyme partitioning. Longer TLL and higher pH resulted in better partitioning into the top phase. Under the most favorable partition conditions with 8.5% (w/w) PEG-6000, 17.5% (w/w) (NH₄)₂SO₄ and V_R = 0.25 at pH 8.0, partition coefficient (K_E), recovery (R%), yield (Y%) and TLL were achieved 58.7%, 135%, 94.42% and 39.89% (w/w), respectively. Overall, the promising results obtained in this research indicated that the ATPS partitioning can be provided an efficient and powerful tool for recovery and purification of recombinant PheDH.     

Purification of plant-esterase in PEG1000/NaH2PO4 aqueous two-phase system by a two-step extraction

Purification of plant-esterase from flour in an aqueous two-phase system (ATPS) was investigated. The effects of various process parameters such as the type of aqueous two-phase systems, the phase-forming salt, the molecular weight and concentration of PEG, the system pH, and the types and concentrations of neutral salts on partitioning of plant-esterase were evaluated. Optimized conditions for the purification of plant-esterase were found in polymer–salt systems, with especially promising results in the PEG1000/NaH₂PO₄ system. Using 27.0% PEG1000/13.0% NaH₂PO₄ (w/w, pH 5.0), and 27.0% PEG1000/13.0% NaH₂PO₄/6.0% (NH₄)₂SO₄ (w/w, pH 5.0), plant-esterase was purified by a two-step extraction. Compared to the results obtained with the conventional salting-out method, this method had a comparable yield (83.16% versus the original yield of 80%), but produced plant-esterase that was 4.8 times as pure (18.46-fold). Integrating dialysis into the aqueous two-phase extraction removed (NH₄)₂SO₄ from the purified plant-esterase. Finally, plant-esterase was freeze-dried to convert the product to powder. This work offers a simple and more efficient process to purify and concentrate plant-esterase. Plant-esterase is used in applications such as organophosphorus compounds (OPs) detection and since our method makes this enzyme easier to isolate, it will enhance researchers’ ability to explore these applications.     

Downstream processing of luciferase from fireflies (Photinus pyralis) using aqueous two-phase extraction

The firefly luciferase has been extensively used for sensitive detection of bacteria, gene expression and environmental toxins (biosensors). The aim of the present study was to design a simple and more efficient method for the purification and concentration of luciferase using aqueous two-phase extraction (ATPE). Downstream processing of luciferase from North American Firefly Photinus pyralis was carried out, for the first time, using polymer/salt aqueous two phase system (ATPS) at 4 °C. The enzyme was observed to preferentially partition to the polyethylene glycol (PEG) rich top phase. The best results of purification (13.69 fold) and enzyme activity recovery (118.34%) were observed in the system containing 4.0% (w/w) PEG (1500) and 20.5% (w/w) (NH₄)₂SO₄ with a phase volume ratio of 0.21.     

Separation and determination of tetracycline hydrochloride in real water samples using binary small molecule alcohol‐salt aqueous two‐phase system coupled with high‐performance liquid chromatography

An environmental and sensitive sample pretreatment method was established and combined with high‐performance liquid chromatography (HPLC) for the analysis of tetracycline hydrochloride (TC) in feed water and lake water. One element small molecule alcohol‐salt aqueous two‐phase system (ATPS) cannot effectively adjust the polarity of the system, but binary small molecule alcohol‐salt ATPS can adjust the polarity and improve the extraction efficiency of antibiotics. In this work, a binary ATPS based on ethanol +2‐propanol + (NH₄)₂SO₄ system was formed and applied to the separation and purification of TC in real water samples. The influence factors on partition behaviors of TC were discussed, including the types and the concentration of phase salts, the volume ratio of alcohol, the pH value, extraction temperature, and the standing time. The response surface methodology was used to determine the best experimental conditions for multi‐factor experiments. Under this optimal condition, the extraction efficiency of TC reached 95.7%. This new method is considered to have significant application in the divorce of antibiotics.     

Partition and substrate concentration effect in the enzymatic synthesis of cephalexin in aqueous two-phase systems

The kinetically controlled synthesis of cephalexin in aqueous two-phase systems was studied, using immobilized penicillin acylase, 7-amino 3-desacetoxycephalosporanic acid as nucleophile and phenylglycine methyl ester as acyl donor. The organic phases used were 80% (v/v) polyethyleneglycol 400 and 600 and the aqueous phase was 2.5 M (NH₄)₂SO₄. 7-amino 3-desacetoxycephalosporanic acid and cephalexin partition coefficients were determined at pH 7.4 and 7.8, at 14 °C and 20 °C. Highest partition coefficient for cephalexin was obtained for polyethyleneglycol 400–(NH₄)₂SO₄ at pH 7.4 and 20 °C, while the lowest partition coefficient for 7-amino desacetoxycephalosporanic acid was obtained in the same system at pH 7.8 and 14 °C. No significant effect of pH was observed on conversion yield and productivity of cephalexin synthesis; however, higher values were obtained with polyethyleneglycol 400 as organic phase. Higher conversion yields with both biphasic systems were obtained at the lowest temperature, where product hydrolysis was lower; volumetric productivity was higher for the fully aqueous medium (control), being higher at 20 °C. All parameters of synthesis were improved at higher substrates concentrations, obtaining conversion yields of 78.2% and 65.4%, with 60 mM 7-amino desacetoxycephalosporanic acid for the polyethyleneglycol 400–(NH₄)₂SO₄ system and the control, respectively.     

Immobilization of penicillin G acylase on paramagnetic aldehyde-functionalized mesostructured cellular foams

Paramagnetic aldehyde-functionalized mesostructured cellular foams (PAMCFs), synthesized by grafting 3-aminopropyltriethoxysilane modified Fe₃O₄ (NH₂-Fe₃O₄) nanoparticles with larger particle size than the window pore size of MCFs on the outer surface of aldehyde-functionalized mesostructured cellular foams (AMCFs), were investigated as efficient supports for immobilization of penicillin G acylase (PGA). The results show that NH₂-Fe₃O₄ nanoparticles were successfully grafted on the outer surface of AMCFs and PGA molecules were mainly immobilized covalently on the inner surface of PAMCFs, which was because amino groups of NH₂-Fe₃O₄ nanoparticles or PGA molecules reacted with aldehyde groups of AMCFs or PAMCFs to form imine bonds. PGA/PAMCFs-15 showed a rather high initial activity of 9563 U g⁻¹ and retained 89.1% of its initial activity after recycled for 10 times. PGA/PAMCFs are easily recycled by magnetic field in order to replace tedious separation of high-speed centrifugation for mesoporous materials.     

Extraction of protease from Calotropis procera latex by polyethylene glycol–salts biphasic system

The protease from the latex of Calotropis procera was isolated by an aqueous two-phase system (ATPS). The systems consist of polyethylene glycol (PEG 4000, 6000 and 8000) at concentrations of 9, 12 and 15% (w/w) with salts (Na-citrate, MgSO₄, K₂HPO₄, and (NH₄)₂SO₄) at concentrations of 11, 14 and 17% (w/w) were investigated. The highest protease recovery was found in the PEG-rich phase of the system, comprising of 12% PEG 4000–17% MgSO₄. For optimization of the system to obtain the higher yield of protease, the system pH (4, 7 and 10) or NaCl addition (2, 4 and 6%, w/w) was studied. At acidic (pH 4.0) and alkaline (9.0) conditions of the systems the reduction of K_E and protease recovery was clearly observed compared to that of the neutral pH (7.0). The addition of NaCl up to a final concentration of 6% (w/w) significantly increased the yield to 107% of the control. Molecular weight distribution and activity staining showed that the isolated protease had the molecular weight of ∼38 kDa. However, the isolated protease had no activity under reducing condition (βME). Under cathodic electrophoresis, protease from C. procera showed the same protein pattern to purified papain.     

Interference of some aqueous two-phase system phase-forming components in protein determination by the Bradford method

The interference of some specific aqueous two-phase system (ATPS) phase-forming components in bovine serum albumin (BSA) determination by the Bradford method was investigated. For this purpose, calibration curves were obtained for BSA in the presence of different concentrations of salts and polymers. A total of 19 salts [Na₂SO₄, (NH₄)₂SO₄, MgSO₄, LiSO₄, Na₂HPO₄, sodium phosphate buffer (pH 7.0), NaH₂PO₄, K₂HPO₄, potassium phosphate buffer (pH 7.0), KH₂PO₄, C₆H₈O₇, Na₃C₆H₅O₇, KCHO₂, NaCHO₂, NaCO₃, NaHCO₃, C₂H₄O₂, sodium acetate buffer (pH 4.5), and NaC₂H₃O₂] and 7 polymers [PEG 4000, PEG 8000, PEG 20000, UCON 3900, Ficoll 70000, PES 100000, and PVP 40000] were tested, and each calibration curve was compared with the one obtained for BSA in water. Some concentrations of salts and polymers had considerable effect in the BSA calibration curve. Carbonate salts were responsible for the highest salt interference, whereas citric and acetic acids did not produce interference even in the maximum concentration level tested (5 wt%). Among the polymers, UCON gave the highest interference, whereas Ficoll did not produce interference when used in concentrations up to 10 wt%. It was concluded that a convenient dilution of the samples prior to the protein quantification is needed to ensure no significant interference from ATPS phase-forming constituents.     

Polyglutamic acid (PGA) production by Bacillus sp. SAB-26: application of Plackett–Burman experimental design to evaluate culture requirements

A locally isolated thermostable Bacillus strain producing polyglutamic acid (PGA) was characterized and identified based on 16S rRNA sequencing. Phylogenetic analysis revealed its closeness to Bacillus licheniformis. To evaluate the effect of different culture conditions on the production of PGA, Plackett–Burman factorial design was carried out. Fifteen variables were examined for their significance on PGA production. Among those variables, K₂HPO₄, KH₂PO₄, (NH₄)₂SO₄ and casein hydrolysate were found to be the most significant variables that encourage PGA production. A correlation between cellular growth, PGA and the produced traces of polysaccharides was illustrated. An inverse relationship practice between cell dry weights and the produced PGA was demonstrated. On the other hand, a direct proportional relation was shown between polysaccharides on one side and cell dry weight and produced PGA on the other. The preoptimized medium, based on statistical analysis, showed a production of 33.5 g/l PGA, which is more than three times the basal medium.     

槐尺蠖多酚氧化酶的纯化及酶学特征

经40%饱和度硫酸铵分级沉淀,Sephadex G-100凝胶过滤等步骤,将槐尺蠖Semiothisa cinerearia Bremer et Grey 多酚氧化酶纯化,纯化倍数为6.96倍。该酶对焦性没食子酸,邻苯二酚和L多巴的Km值分别为0.23 mmol/L, 0.48 mmol/L和0.49 mmol/L。多酚氧化酶在pH 7.0,37℃时活性最高,并在40℃以上条件下,随着保温时间的延长酶活力下降。用槲皮苷和硫脲作抑制剂对该酶活性的抑制结果表明,这两种抑制剂分别属于竞争性和非竞争性抑制剂。     

Regulation of avilamycin biosynthesis in Streptomyces viridochromogenes: effects of glucose, ammonium ion, and inorganic phosphate

Effects of glucose, ammonium ions and phosphate on avilamycin biosynthesis in Streptomyces viridochromogenes AS4.126 were investigated. Twenty grams per liter of glucose, 10 mmol/L ammonium ions, and 10 mmol/L phosphate in the basal medium stimulated avilamycin biosynthesis. When the concentrations of glucose, ammonium ions, and phosphate in the basal medium exceeded 20 g/L, 10 mmol/L, and 10 mmol/L, respectively, avilamycin biosynthesis greatly decreased. When 20 g/L glucose was added at 32 h, avilamycin yield decreased by 70.2%. Avilamycin biosynthesis hardly continued when 2-deoxy-glucose was added into the basal medium at 32 h. There was little influence on avilamycin biosynthesis with the addition of the 3-methyl-glucose (20 g/L) at 32 h. In the presence of excess (NH₄)₂SO₄ (20 mmol/L), the activities of valine dehydrogenase and glucose-6-phosphate dehydrogenase were depressed 47.7 and 58.3%, respectively, of that of the control at 48 h. The activity of succinate dehydrogenase increased 49.5% compared to the control at 48 h. The intracellular adenosine triphosphate level and 6-phosphate glucose content of S. viridochromogenes were 128 and 129%, respectively, of that of the control at 48 h, with the addition of the 40 mmol/L of KH₂PO₄. As a result, high concentrations of glucose, ammonium ions, and inorganic phosphate all led to the absence of the precursors for avilamycin biosynthesis and affected antibiotic synthesis.     

Nitrosomonas sp. Based biosensor for ammonium nitrogen measurement in wastewater

A bacterial culture of Nitrosomonas sp. was isolated from a nitrifying biofilm to construct a biosensor for ammonium nitrogen (NH ₄ ⁺ ?N) measurements in high ammonia wastewaters. The pure culture of microorganisms was immobilized into agarose gel matrix to attain a stable biosensor with a long service life. Biosensors were calibrated using (NH₄)₂SO₄ solution and a steady-state method. Subsequently, several experiments with synthetic and industrial wastewaters were conducted. A linear range up to 20 mg/L of NH ₄ ⁺ ?N, and sensitivities between 0.030 and 0.036 were gained with biosensors. During 14 days of stable service life of the Nitrosomonas sp. biosensors, variation of the signal was less than 7%. Response times of biosensors were 15 ～ 25 min, while recovery times were up to 25 min. Measurements with high ammonia content synthetic and industrial wastewaters were conducted, and 8.3 and 5.6% over estimation of NH ₄ ⁺ ?N was gained, respectively, compared with results of Nessler method. In spite of the small overestimation, the biosensor based on a pure culture of Nitrosomonas sp. and calibrated with (NH₄)₂SO₄ is suitable for the analysis of NH ₄ ⁺ ?N in high ammonia content wastewaters.     

A new approach to ammonium sulphate feeding for fed‐batch Arthrospira (Spirulina) platensis cultivation in tubular photobioreactor

Arthrospira platensis was cultivated in tubular photobioreactor using different photosynthetic photon flux densities (PPFD) and protocols of (NH₄)₂SO₄ fed‐batch supply. Results were evaluated by variance analysis selecting maximum cell concentration (X_m), cell productivity (P_x), nitrogen‐to‐cell conversion factor (Y_X/N) and biomass, protein and lipid contents as responses. At PPFD of 120 and 240 μmol‐photons/m² s, a parabolic profile of (NH₄)₂SO₄ addition aiming at producing biomass with 7% nitrogen content ensured X_m values (14.1 and 12.2 g/L, respectively) comparable to those obtained with NaNO₃. At PPFD of 240 μmol‐photons/m² s, P_x (1.69 g/Ld) was 36% higher, although the photosynthetic efficiency (3.0%) was less than one‐half that at PPFD of 120 μmol‐photons/m² s. Biomass was shown to be constituted by about 35% proteins and 10% lipids, without any dependence on PPFD or kind of nitrogen source. These results highlight the possible use of (NH₄)₂SO₄ as alternative, cheap nitrogen source for A. platensis cultivation in tubular photobioreactors. © 2010 American Institute of Chemical Engineers Biotechnol. Prog., 2010     

Enhanced In Vitro Plantlet Regeneration from Mature Embryo-derived Primary Callus of a Basmati Rice Cultivar Through Modification of Nitrate-nitrogen and Ammonium-nitrogen Concentrations

Mature-embryo derived primary calli of the basmati rice (Oryza sativa L.) cv Karnal Local showed significant enhancement in in vitro green-plantlet regeneration efficiency through modification of nitrogen content of the callusing medium. Using KNO₃ as the source of nitrate nitrogen and (NH₄)₂SO₄ as the source of ammonium nitrogen, forty-five media combinations involving 9 levels of KNO₃ (0–40 mM) and 5 concentrations (0–6.5 mM) of (NH₄)₂SO₄ were examined. The highest frequency of plantlet regeneration (100%) and a maximum number of green-plantlets (～ 7) per embryo-derived primary callus was obtained in calli derived from the medium having 35 mM KNO₃ and 5 mM (NH₄)₂SO₄. Higher concentrations of KNO₃ and/or (NH₄)₂SO₄ showed a decline in the regeneration efficiency. It was also observed that although the nitrogen content of the callus induction medium had a profound effect on the regenerability of the callus, the nitrogen composition of the regeneration medium also affected it significantly.     

Physiological effects of long term exposure to low concentrations of SO2 and NH3 on poplar leaves

Shoots of poplar (Populus euramericana L. cv. Flevo) were exposed to filtered air, SO₂, NH₃ or a mixture of SO₂ and NH₃ for 7 weeks in fumigation chambers. After this exposure gas exchange measurements were carried out using a leaf chamber. As compared to leaves exposed to filtered air, leaves pretreated with 112 μg m^?3 SO₂ showed a small reduction in maximum CO₂ assimilation rate (P_max) and stomatal conductance (g_s). They also showed a slightly higher quantum yield and dark respiration. In addition, the fluorescence measurements indicated that the Calvin cycle of the leaves pretreated with 112 μg m^?3 SO₂ was more rapidly activated after transition from dark to light. An exposure to 64 μg m^?3 NH₃ had a positive effect on P_max, stomatal conductance and NH₃ uptake of the leaves. This positive effect was counteracted by an SO₂ concentration of 45 μg m^?3. The exposure treatments appeared to have no effect on the relationship between net CO₂-assimilation and g_s. Also, no injury of the leaf cuticle or of epidermal cells was observed. Resistance analysis showed that NH₃ transfer into the leaf can be estimated from data on the boundary layer and stomatal resistance for H₂O transfer and NH₃ concentration at the leaf surface, irrespective of whether the leaves are exposed for a short or long time to NH₃ or to a mixture of NH₃ and SO₂. In contrast SO₂ uptake into the leaves was only partly correlated to the stomatal resistance. The results suggest a large additional uptake of this gas by the leaves. The possibility of a difference in path length between SO₂ and H₂O molecules is proposed.