Determination of cell concentration in a plant cell suspension using a fluorescence microplate reader

Microscopic counting of plant cells is a very tedious and time-consuming process and is therefore seldom used to evaluate plant cell number on a routine basis. This study describes a fast and simple method to evaluate cell concentration in a plant cell suspension using a fluorescence microplate reader. Eschscholtzia californica cells were fixed in a mix of methanol and acetic acid (3:1) and stained with a fluorescent DNA binding dye (Hoechst 33258). Readings were done in a fluorescence microplate reader at 360/465 nm. Specific binding of the dye to double-stranded DNA was significantly favored over unspecific binding when 1.0 M Tris buffer at pH 7.5 containing 1.0 M NaCl and 75 microg ml(-1) of Hoechst 33258 was used. Fluorescence readings must be done between 4 min and 12 min following the addition of the staining solution to the sample. The microplate counting method provides a convenient, rapid and sensitive procedure for determining the cell concentration in plant cell suspensions. The assay has a linear detection range from 0.2 x 10(6) cells to 10.0 x 10(6) cells per milliliter (actual concentration in the tested cell suspension). The time needed to perform the microplate counting was 10% of that needed for the microscopic enumeration. However, this microplate counting method can only be used on genetically stable cell lines and on asynchronous cell suspensions.     

Fluorescence resonance energy transfer (FRET) using ssDNA binding fluorescent dye

There is a need for simple and inexpensive methods for genotyping single nucleotide polymorphisms (SNPs) and short insertion/deletion variations (InDels). In this work, I demonstrate that a single-stranded DNA (ssDNA) binding dye can be used as a donor fluorophore for fluorescence resonance energy transfer (FRET). The method presented is a homogenous assay in which detection is based on the FRET from the fluorescence of the ssDNA dye bound to the unmodified detection primer to the fluorescent nucleotide analog incorporated into this detection primer during cyclic template directed primer extension reaction. Collection of the FRET emission spectrum with a scanning fluorescence spectrophotometer allows powerful data analysis. The fluorescence emission signal is modified by the optical properties of the assay vessel. This seems to be a completely neglected parameter. By proper selection of the optical properties of the assay plate one can improve the detection of the fluorescence emission signal.     

A simple fluorescent method for detecting mismatched DNAs using a MutS-fluorophore conjugate

A fluorescent method was developed for the detection of unpaired and mismatched DNAs using a MutS-fluorophore conjugate. The fluorophore, 2-(4'-(iodoacetoamido)anilino) naphthalene-6-sulfonic acid (IAANS), was site-specifically attached to the 469 position of Thermus aquaticus (Taq.) MutS mutant (C42A/T469C). The fluorophore labeled residue located at the dimer interface of the protein undergoes a drastic conformational change upon binding with mismatched DNA. The close proximity of the two identical fluorescent molecules presumably causes the self-quenching of the fluorophore, since fluorescence emission of the biosensor decreases with increasing concentrations of mismatched DNA. The order of binding affinity for each unpaired and mismatched DNA obtained by this method was DeltaT (Kd=52 nM)>GT (62 nM)>DeltaC (130 nM)>CT (160 nM)>DeltaG (170 nM)>DeltaA (250 nM)>CC (720 nM)>AT (950 nM). This order is comparable to the previous results of the gel mobility shift assay. Thus, this method can be a simple, useful tool for elucidating the mechanism of DNA mismatch repair as well as a novel probe for detecting of genetic mutation.     

Effects of humic substances on fluorometric DNA quantification and DNA hybridization

DNA extracts from sediment and water samples are often contaminated with coextracted humic-like impurities. Estuarine humic substances and vascular plant extract were used to evaluate the effect of the presence of such impurities on DNA hybridization and quantification. The presence of humic substances and vascular plant extract interfered with the fluorometric measurement of DNA concentration using Hoechst dye H33258 and PicoGreen reagent. Quantification of DNA amended with humic substances (20-80 ng/microl) using the Hoechst dye assay was more reliable than with PicoGreen reagent. A simple procedure was developed to improve the accuracy for determining the DNA concentration in the presence of humic substances. In samples containing up to 80 ng/microl of humic acids, the fluorescence of the samples were measured twice: first without Hoechst dye to ascertain any fluorescence from impurities in the DNA sample, followed with Hoechst dye addition to obtain the total sample fluorescence. The fluorescence of the Hoechst dye-DNA complex was calculated by subtracting the fluorescence of the impurities from the fluorescence of the sample. Vascular plant extract and humic substances reduced the binding of DNA onto the nylon membrane. Low amounts (<2.0 microg) of humic substances derived from estuarine waters did not affect the binding of 100 ng of target DNA to nylon membranes. DNA samples containing 1.0 microg of humic substances performed well in DNA hybridizations with DIG-labeled oliogonucleotide and chromosomal probes. Therefore, we suggest that DNA samples containing low concentrations of humic substances (<20 ng/microl) could be used in quantitative membrane hybridization without further purification.     

Denaturation and condensation of intracellular nucleic acids monitored by fluorescence depolarization of intercalating dyes in individual cells

The intercalating binding of planar aromatic dye molecules to nucleic acids can be analyzed using fluorescence depolarization measurements of the dye molecules excited by linearly polarized light. In this study, we investigated the conformational changes of the intracellular DNA-dye complex in single cells. Flow cytometry, combined with a newly developed double-beam autocompensation technique, permitted rapid high-precision fluorescence depolarization measurements on a large number of individual cells. The dyes ethidium bromide (EB), propidium iodide (PI), and acridine orange (AO) were used in this study. Depending on the dye-to-phosphate ratio of the nuclear acid-dye complex, as well as on the spatial dye structure itself, internal and external binding sites can be monitored by fluorescence depolarization analysis. Both energy transfer and rotation and vibration of the dye molecules cause depolarization of the fluorescence emission. Differences in the concentration-dependent dye fluorescence depolarization values between PI and EB on one side and AO on the other side can be interpreted as a denaturation and condensation of double-stranded DNA regions by AO. We further show that the fluorescence polarization measurement technique can be used in an alternative way to monitor thermal denaturation of cellular DNA.     

Oxazole yellow homodimer YOYO-1-labeled DNA: a fluorescent complex that can be used to assess structural changes in DNA following formation and cellular delivery of cationic lipid DNA complexes.

To improve transfection efficiency following delivery of plasmid expression vectors using lipid-based carriers, it is crucial to define structural characteristics of the lipid/DNA complexes that optimize transgene expression. Due to its strong affinity for DNA and high quantum yield, the fluorescent DNA intercalator YOYO-1 was used as a tool to assess changes in DNA that occur following lipid binding and cell delivery. In this study, the stability of the dye/DNA complex following binding of poly-L-lysine or monocationic lipids is characterized. More than 98% of the fluorescence measured for a defined DNA/YOYO-1 complex was lost when DNA was condensed using poly-L-lysine. This loss in fluorescence could be attributed to displacement of bound dye. In contrast, more than 30% of the fluorescence of the dye-labeled DNA was retained after formation of cationic lipid/DNA complexes. Significantly, the results illustrate differences in structural changes cationic lipids and PLL exert on plasmid DNA. The fluorescent lipid/DNA complex was used to assess DNA delivery to murine B16/BL6 cells in vitro. An assay relying on fluorescence resonance energy transfer between bound YOYO-1 and propidium iodide was used to distinguish between DNA attached to the cell surface and internalized DNA.     

Enantioselective and label-free detection of oligopeptide via fluorescent indicator displacement

In this work, a simple and label-free fluorescent method via fluorescent indicator displacement (FID) was proposed for enantioselectively determining d-enantiomer of arginine vasopressin (DV) using DV-specific DNA aptamer (V-apt) and one guanidiniophthalocyanine dye (Zn-DIGP). Zn-DIGP that preferentially binds to single-stranded DNA with fluorescence enhancement rather than duplexes occupies the long internal loop of V-apt and generates intensive fluorescence. Then DV is introduced into the solution containing Zn-DIGP and V-apt, and displaces the Zn-DIGP from the binding site of internal loop, leading to fluorescence decrease. But l-enantiomer cannot induce any fluorescence change due to the selectivity of V-apt. This established FID technique can detect DV with a detection limit of 100 nM and exhibits a broad linear range, and is able to discriminate enantiomers of arginine vasopressin unambiguously. Moreover chiral separation by chromatography, complicated experimental procedures and covalent modification of tags (such as organic dyes, redox-active metal complexes) are avoided in our strategy. This simple and label-free method is promising for fabricating diverse aptasensors to determine other biomolecules and drugs.     

Frequent gain and loss of pyrrolizidine alkaloids in the evolution of Senecio section Jacobaea (Asteraceae)

Pyrrolizidine alkaloids (PAs) of the macrocyclic senecionine type are secondary metabolites characteristic for most species of the genus Senecio (Asteraceae). These PAs are deterrent and toxic to most vertebrates and insects and provide plants with a chemical defense against herbivores. We studied the PA composition of 24 out of 26 species of Senecio section Jacobaea using GC-MS. The PA profiles of eight of these species have not been studied before and additional PAs were identified for most other species that were included in previous studies. With one exception (senecivernine) all 26 PAs identified in sect. Jacobaea can be regarded as derivatives of the biosynthetic backbone structure senecionine. Based on the PA profiles of the species of sect. Jacobaea and the results of previous tracer studies, we constructed two hypothetical biosynthetic scenarios of senecionine diversification. Both scenarios contain two major reactions: the conversion of the necine base moiety retronecine into the otonecine moiety and site-specific epoxidations within the necic acid moiety. Further reactions are site-specific hydroxylations, sometimes followed by O-acetylations, site-specific dehydrogenations, E, Z-isomerizations, and epoxide hydrolysis and chlorolysis. The GC-MS data and both biosynthetic scenarios were subsequently used to study the evolution of PA formation in sect. Jacobaea by reconstructing the evolutionary history of qualitative PA variation in this section. This was achieved by optimizing additive presence/absence data of PAs and types of enzymatic conversions on a maximum parsimony cladogram of section Jacobaea inferred from DNA sequence and morphological data. Besides showing large intra- and interspecific variation, PA distribution appears to be largely incidental within the whole clade. These results together with the finding that all but one of the PAs identified in sect. Jacobaea are also present in species of other sections of Senecio indicate that differences in PA profiles in Senecio can not be explained by the gain and loss of PA specific genes, but rather by a transient switch-off and switch-on of the expression of genes encoding PA pathway-specific enzymes.     

Fluorometric assay of DNA in cartilage explants using Hoechst 33258

A simple two-step fluorometric assay of DNA in cartilage explants, utilizing the bisbenzimidazole dye Hoechst 33258, is described. Cartilage explants were prepared for assay by digestion with papain. Aliquots of the digest were mixed with dye solution, and the fluorescence emission measured. The enhancement in fluorescence of dye was specific for DNA, as demonstrated by 97% sensitivity to DNase and resistance to RNase. In addition, little or no interference was caused by non-DNA tissue components, since DNA caused an equal enhancement in fluorescence independent of the presence of papain-digested cartilage. By performing the assay on isolated chondrocytes, the cellular content of DNA was computed to be 7.7 pg per chondrocyte. The assay was stable for at least 2 h and sensitive to as little as 6 ng of DNA or equivalently less than 1000 cells. This procedure offers advantages over other established DNA assays of cartilage and may be especially useful in metabolic studies of cartilage explants.     

A scintillation proximity assay amenable for screening and characterization of DNA gyrase B subunit inhibitors.

DNA gyrase is the target of coumarin and cyclothialidine antibacterials, which bind to the B subunit of the enzyme (GyrB). Currently available GyrB inhibitors have not been clinically successful, but their high in vitro potency against DNA gyrase has raised interest in the development of novel noncoumarin antibacterials acting at the same site. We report the development of a simple scintillation proximity assay (SPA) for the study of binding interactions between coumarin or noncoumarin antibacterials and GyrB, which prevents the needs of separation steps and can be run in microtiter plate formats. The assay is based on the detection of the binding of a radioligand, [3H]dihydronovobiocin, to a biotin-labeled 43-kDa fragment of GyrB (biotin-GyrB43), which is captured by streptavidin-coated SPA beads. The typical assay was conducted in 96-well microtiter plates, with final concentration of 10 nM for biotin-GyrB43, 20 nM for [3H]dihydronovobiocin, and 33 microg of SPA beads/well. From saturation experiments, an equilibrium dissociation constant (K(d)) for dihydronovobiocin of 8.10 nM was found. Displacement studies gave 50% inhibitory concentrations (IC(50)) of 42, 64, and 11 nM for novobiocin, dihydronovobiocin, and the cyclothialidine analogue GR122222X, respectively, consistent with previous findings. The assay was found to be robust to dimethyl sulfoxide up to 5% (v/v) and can be used for high-throughput screens of large chemical collections in the search of novel DNA gyrase inhibitors.     

Interaction of Oxazole Yellow Dyes with DNA Studied with Hybrid Optical Tweezers and Fluorescence Microscopy

We have integrated single molecule fluorescence microscopy imaging into an optical tweezers set-up and studied the force extension behavior of individual DNA molecules in the presence of various YOYO-1 and YO-PRO-1 concentrations. The fluorescence modality was used to record fluorescent images during the stretching and relaxation cycle. Force extension curves recorded in the presence of either dye did not show the overstretching transition that is characteristic for bare DNA. Using the modified wormlike chain model to curve-fit the force extension data revealed a contour length increase of 6% and 30%, respectively, in the presence of YO-PRO-1 and YOYO-1 at 100 nM. The fluorescence images recorded simultaneously showed that the number of bound dye molecules increased as the DNA molecule was stretched and decreased again as the force on the complex was lowered. The binding constants and binding site sizes for YO-PRO-1 and YOYO-1 were determined as a function of the force. The rate of YO-PRO-1 binding and unbinding was found to be 2 orders of magnitude larger than that for YOYO-1. A kinetic model is proposed to explain this observation.     

Monitoring protein-small molecule interactions by local pH modulation

We have developed a technique for sensing protein-small molecule and protein-ion interactions in bulk aqueous solution by utilizing a pH sensitive dye, 5-(and-6)-carboxyfluorescein, conjugated to free lysine residues on the surfaces of designated capture proteins. The fluorescein intensity was found to change by about 6% and 15% for small molecule and ion binding, respectively. The assay works by modulating the local electric fields around a pH sensitive dye. This, in turn, alters the dye's apparent pK(A) value. Such changes may result directly from the charge on the analyte, occur through allosteric effects related to the binding process, or result from a combination of both. The assay was used to follow the binding of Ca(2+) to calmodulin (CaM) and thiamine monophosphate (ThMP) to thiamine binding protein A (TbpA). The results demonstrate a binding constant of 1.1μM for the Ca(2+)/CaM pair and 3.2nM for ThMP/TbpA pair, which are in excellent agreement with literature values. These assays demonstrate the generality of this method for observing the interactions of small molecules and ions with capture proteins. In fact, the assay should work as a biosensor platform for most proteins containing a specific ligand binding site, which would be useful as a simple and rapid preliminary screen of protein-ligand interactions.     

Polyamines induce rapid biosynthesis of nitric oxide (NO) in Arabidopsis thaliana seedlings

In this study, we examined the regulation by putrescine, spermidine and spermine of nitric oxide (NO) biosynthesis in Arabidopsis thaliana seedlings. Using a fluorimetric method employing the cell-impermeable NO-binding dye diaminorhodamine-4M (DAR-4M), we observed that the polyamines (PAs) spermidine and spermine greatly increased NO release in the seedlings, whereas arginine and putrescine had little or no effect. Spermine, the most active PA, stimulated NO release with no apparent lag phase. The response was quenched by addition of 2-aminoethyl-2-thiopseudourea (AET), an inhibitor of the animal nitric oxide synthase (NOS) and plant NO biosynthesis, and by 2-(4-carboxyphenyl)-4,4,5,5-tetramethylimidazoline-1-1-oxy-3-oxide (PTIO), an NO scavenger. By fluorescence microscopy, using the cell-permeable NO-binding dye diaminorhodamine-4M acetoxymethyl ester (DAR-4M AM), we observed that PAs induced NO biosynthesis in specific tissues in Arabidopsis seedlings. Spermine and spermidine increased NO biosynthesis in the elongation zone of the Arabidopsis root tip and in primary leaves, especially in the veins and trichomes, while in cotyledons little or no effect of PAs beyond the endogenous levels of NO-induced fluorescence was observed. We conclude that PAs induce NO biosynthesis in plants.     

Optical studies of the interaction of 33258 Hoechst with DNA,chromatin, and metaphase chromosomes

The interaction of the bisbenzimidazole dye 33258 Hoechst with DNA and chromatin is characterized by changes in absorption, fluorescence, and circular dichroism measurements. At low dye/phosphate ratios, dye binding is accompanied by intense fluorescence and circular dichroism and exhibits little sensitivity to ionic strength. At higher dye/phosphate ratios, additional dye binding can be detected by further changes in absorptivity. This secondary binding is suppressed by increasing the ionic strength. A-T rich DNA sequences enhance both dye binding and fluorescence quantum yield, while chromosomal proteins apparently exclude the dye from approximately half of the sites available with DNA. Fluorescence of the free dye is sensitive to pH and, below pH 8, to quenching by iodide ion. Substitution of 5-bromodeoxyuridine (BrdU) for thymidine in synthetic polynucleotides, DNA, or unfixed chromatin quenches the fluorescence of bound dye. This suppression of dye fluorescence permits optical detection of BrdU incorporation associated with DNA synthesis in cytological chromosome preparations. Quenching of 33258 Hoechst fluorescence by BrdU can be abolished by appropriate alterations in solvent conditions, thereby revealing changes in dye fluorescence of microscopic specimens specifically due to BrdU incorporation.     

Applying 6-Methylisoxanthopterin-Enhanced Fluorescence To Examine Protein-DNA Interactions in the Picomolar Range

Incorporation of fluorescent nucleoside analogues into duplex DNA usually leads to a reduction in quantum yield, which significantly limits their potential use and application. We have identified two pentamer DNA sequences containing 6-methylisoxanthopterin (6-MI) (ATFAA and AAFTA, where F is 6-MI) that exhibit significant enhancement of fluorescence upon formation of duplex DNA with quantum yields close to that of monomeric 6-MI. The enhanced fluorescence dramatically increases the utility and sensitivity of the probe and is used to study protein-DNA interactions of nanomolar specificity in this work. The increased sensitivity of 6-MI allows anisotropy binding measurements to be performed at DNA concentrations of 1 nM and fluorescence intensity measurements at 50 pM DNA. The ATFAA sequence was incorporated into DNA constructs to measure the binding affinity of four different protein-DNA interactions that exhibit sequence-specific and non-sequence-specific recognition. In all cases, the K(d) values obtained were consistent with previously reported values measured by other methods. Time-resolved and steady-state fluorescence measurements demonstrate that 6-MI fluorescence is very sensitive to local distortion and reports on different degrees of protein-induced perturbations with single-base resolution, where the largest changes occur at the site of protein binding.     

FLUORESCENT DNA BINDING DYE-BASED APPROACH FOR MEASURING THE GROWTH OF AN ESCHERICHIA COLI LYSINE AUXOTROPH AND QUANTIFYING LYSINE

Microbiological assays for determination of bioavailable lysine appear to have many advantages. However, since the developed assay is based on bacterial growth and considerable optical density (OD) is required to detect distinguishable differences in extent of growth, it can be time consuming. The purpose of this study was to explore the fluorescence as an alternative method to measure bacterial growth instead of OD and examine the possibility to shorten the time required for the lysine assay. An assay based on SYTO 9 green fluorescent DNA binding dye (Live/Dead BacLight Protocol, Molecular Probes) was used to stain all bacteria in a population. Additional experiments were carried out to determine the ability of fluorescence based on SYTO 9 to overcome problems associated with high nonbacterial background that contributes to OD. From this study it appears that using fluorescence based on SYTO 9 green fluorescent staining, the E. coli lysine auxotroph growth assay can be completed in 9 h instead of 11 h and has the advantage of improved detection sensitivity. Problems associated with interference by high background nonbacterial OD can be partially resolved by fluorescence.     

Flow cytometry of DNA content using oxazine 750 or related laser dyes with 633 nm excitation

The laser dyes oxazine 750 (OX750), LD700, and rhodamine 800 (R800) can be used in an instrument employing a low-power helium-neon laser source for flow cytometry of DNA content in ethanol-fixed or detergent-permeabilized cells. Cells in near-isotonic medium are stained with 10-30 microM dye, and fluorescence excited at 633 nm is measured at wavelengths above 665 nm. The dyes do not appear to stain RNA, and the intensity of DNA staining is not changed when 2 microM Hoechst 33342 is added to cells simultaneously with a red-excited dye. The effects on fluorescence of addition of DNA to LD700 or R800 in aqueous solution are strongly influenced by the base composition of the DNA; binding mechanisms remain to be determined.     

Highly selective recognition of naphthol isomers based on the fluorescence dye-incorporated SH-β-cyclodextrin functionalized gold nanoparticles

In present work, a rhodamine 6G (Rh 6G)-incorporated β-cyclodextrin functionalized gold nanoparticle (Rh 6G-CD-AuNP) based fluorescent assay has been successfully developed for recognizing/detecting the structural isomers, α-naphthol and β-naphthol, in aqueous solution. The β-cyclodextrin functionalized gold nanoparticles (CD-AuNPs) are achieved by conjugating the thiolated β-cyclodextrin (SH-β-CD) with AuNPs via S-Au covalent bonds. Rhodamine 6G (Rh 6G) is chosen as a fluorescent probe in this approach because it can be strongly absorbed on the surface of AuNP by noncovalent interaction. After binding with β-CD cavity, the naphthols enable to act as electron transfer quenchers of Rh 6G, which lead to significant fluorescence quenching of the dye. Because of different association ability of naphthol isomers with the β-CD cavity, the assay can selectively distinguish α-naphthol and β-naphthol with reasonable sensitivity. Detection of naphthols down to 8 nM with a dynamic range of nearly three orders of magnitude (0.01-8 μM) for α-naphthol and 50 nM with two orders of magnitude (0.1-20 μM) for β-naphthol is demonstrated, respectively. The ability of the method for detecting the content of α-naphthol or β-naphthol in the different naphthol mixtures has also been evaluated.     

Development of a mechanism-based, DNA staining protocol using SYTOX orange nucleic acid stain and DNA fragment sizing flow cytometry

Accurate measurement of single DNA fragments by DNA fragment sizing flow cytometry (FSFC) depends upon precise, stoichiometric DNA staining by the intercalating dye molecules. In this study, we determined the binding characteristics of a commercially available 532 nm wavelength-excitable dye and used this information to develop a universal DNA staining protocol for DNA FSFC using a compact frequency-doubled Nd:YAG laser excitation source. Among twelve 532 nm wavelength-excitable nucleic acid staining dyes tested, SYTOX Orange stain showed the highest fluorescence intensity along with a large fluorescence enhancement upon binding to double-stranded DNA ( approximately 450-fold). Furthermore, using SYTOX Orange stain, accurate fragment-size-distribution histograms were consistently obtained without regard to the staining dye to base pair (dye/bp) ratio. A model describing two binding modes, intercalation (primary, yielding fluorescence) and external binding (secondary, involving fluorescence quenching), was proposed to interpret the performance of the dyes under different dye/bp ratios. The secondary equilibrium dissociation constant was found to be the most critical parameter in determining the sensitivity of each fluorophore to the staining dye/bp ratio. The measurements of both equilibrium dissociation constants provided us with a theoretical framework for developing a universal protocol which was successfully demonstrated over a wide range of DNA concentrations on a compact flow cytometer equipped with a frequency-doubled, diode-pumped, solid-state Nd:YAG laser for rapid and sensitive DNA fragment sizing.     

Fluorescence polarization study of DNA--proflavine complexes

The binding of proflavine to DNA has been studied by measuring the polarization and intensity of emission of DNA–dye complexes. Such measurements also permit the determination of the fluorescence of the bound dye as a function of the degree of binding. Techniques of emission spectroscopy permit the study of complexing at high phosphate to dye ratios, and we have examined complexes formed at up to 12,300:1 phosphates to dye. At high phosphate to dye ratios, we find that equilibrium plots of the binding data show only one type of binding. Reports in the literature of multiple binding constants are shown to be due to the incorrect assumption that the fluorescence of the bound dye is independent of the amount bound. The emission properties can be qualitatively accounted for by assuming that nearest-neighbor interaction between bound dyes quenches the fluorescence. We report that, within experimental error, the binding constant is insensitive to the base content of the DNA. The DNA-dye complexes show a temperature dependent depolarization, the cause of which is, as yet, unknown. Heat denaturation of the DNA–dye complex may be followed on a Perrin plot.