Arabidopsis LTPG Is a Glycosylphosphatidylinositol-Anchored Lipid Transfer Protein Required for Export of Lipids to the Plant Surface

Plant epidermal cells dedicate more than half of their lipid metabolism to the synthesis of cuticular lipids, which seal and protect the plant shoot. The cuticle is made up of a cutin polymer and waxes, diverse hydrophobic compounds including very-long-chain fatty acids and their derivatives. How such hydrophobic compounds are exported to the cuticle, especially through the hydrophilic plant cell wall, is not known. By performing a reverse genetic screen, we have identified LTPG, a glycosylphosphatidylinositol-anchored lipid transfer protein that is highly expressed in the epidermis during cuticle biosynthesis in Arabidopsis thaliana inflorescence stems. Mutant plant lines with decreased LTPG expression had reduced wax load on the stem surface, showing that LTPG is involved either directly or indirectly in cuticular lipid deposition. In vitro 2-p-toluidinonaphthalene-6-sulfonate assays showed that recombinant LTPG has the capacity to bind to this lipid probe. LTPG was primarily localized to the plasma membrane on all faces of stem epidermal cells in the growing regions of inflorescence stems where wax is actively secreted. These data suggest that LTPG may function as a component of the cuticular lipid export machinery.     

Pleiotropic phenotypes of the sticky peel mutant provide new insight into the role of CUTIN DEFICIENT2 in epidermal cell function in tomato

Plant epidermal cells have evolved specialist functions associated with adaptation to stress. These include the synthesis and deposition of specialized metabolites such as waxes and cutin together with flavonoids and anthocyanins, which have important roles in providing a barrier to water loss and protection against UV radiation, respectively. Characterization of the sticky peel (pe) mutant of tomato (Solanum lycopersicum) revealed several phenotypes indicative of a defect in epidermal cell function, including reduced anthocyanin accumulation, a lower density of glandular trichomes, and an associated reduction in trichome-derived terpenes. In addition, pe mutant fruit are glossy and peels have increased elasticity due to a severe reduction in cutin biosynthesis and altered wax deposition. Leaves of the pe mutant are also cutin deficient and the epicuticular waxes contain a lower proportion of long-chain alkanes. Direct measurements of transpiration, together with chlorophyll-leaching assays, indicate increased cuticular permeability of pe leaves. Genetic mapping revealed that the pe locus represents a new allele of CUTIN DEFICIENT2 (CD2), a member of the class IV homeodomain-leucine zipper gene family, previously only associated with cutin deficiency in tomato fruit. CD2 is preferentially expressed in epidermal cells of tomato stems and is a homolog of Arabidopsis (Arabidopsis thaliana) ANTHOCYANINLESS2 (ANL2). Analysis of cuticle composition in leaves of anl2 revealed that cutin accumulates to approximately 60% of the levels observed in wild-type Arabidopsis. Together, these data provide new insight into the role of CD2 and ANL2 in regulating diverse metabolic pathways and in particular, those associated with epidermal cells.     

The acyl-CoA synthetase encoded by LACS2 is essential for normal cuticle development in Arabidopsis

Long-chain acyl-CoA synthetase (LACS) activities are encoded by a family of at least nine genes in Arabidopsis (Arabidopsis thaliana). These enzymes have roles in lipid synthesis, fatty acid catabolism, and the transport of fatty acids between subcellular compartments. Here, we show that the LACS2 gene (At1g49430) is expressed in young, rapidly expanding tissues, and in leaves expression is limited to cells of the adaxial and abaxial epidermal layers, suggesting that the LACS2 enzyme may act in the synthesis of cutin or cuticular waxes. A lacs2 null mutant was isolated by reverse genetics. Leaves of mutant plants supported pollen germination and released chlorophyll faster than wild-type leaves when immersed in 80% ethanol, indicating a defect in the cuticular barrier. The composition of surface waxes extracted from lacs2 leaves was similar to the wild type, and the total wax load was higher than the wild type (111.4 microg/dm(2) versus 76.4 microg/dm(2), respectively). However, the thickness of the cutin layer on the abaxial surface of lacs2 leaves was only 22.3 +/- 1.7 nm compared with 33.0 +/- 2.0 nm for the wild type. In vitro assays showed that 16-hydroxypalmitate was an excellent substrate for recombinant LACS2 enzyme. We conclude that the LACS2 isozyme catalyzes the synthesis of omega-hydroxy fatty acyl-CoA intermediates in the pathway to cutin synthesis. The lacs2 phenotype, like the phenotypes of some other cutin mutants, is very pleiotropic, causing reduced leaf size and plant growth, reduced seed production, and lower rates of seedling germination and establishment. The LACS2 gene and the corresponding lacs2 mutant will help in future studies of the cutin synthesis pathway and in understanding the consequences of reduced cutin production on many aspects of plant biology.     

Arabidopsis Deficient in Cutin Ferulate encodes a transferase required for feruloylation of ω-hydroxy fatty acids in cutin polyester

The cuticle is a complex aliphatic polymeric layer connected to the cell wall and covers surfaces of all aerial plant organs. The cuticle prevents nonstomatal water loss, regulates gas exchange, and acts as a barrier against pathogen infection. The cuticle is synthesized by epidermal cells and predominantly consists of an aliphatic polymer matrix (cutin) and intracuticular and epicuticular waxes. Cutin monomers are primarily C(16) and C(18) unsubstituted, ω-hydroxy, and α,ω-dicarboxylic fatty acids. Phenolics such as ferulate and p-coumarate esters also contribute to a minor extent to the cutin polymer. Here, we present the characterization of a novel acyl-coenzyme A (CoA)-dependent acyl-transferase that is encoded by a gene designated Deficient in Cutin Ferulate (DCF). The DCF protein is responsible for the feruloylation of ω-hydroxy fatty acids incorporated into the cutin polymer of aerial Arabidopsis (Arabidopsis thaliana) organs. The enzyme specifically transfers hydroxycinnamic acids using ω-hydroxy fatty acids as acyl acceptors and hydroxycinnamoyl-CoAs, preferentially feruloyl-CoA and sinapoyl-CoA, as acyl donors in vitro. Arabidopsis mutant lines carrying DCF loss-of-function alleles are devoid of rosette leaf cutin ferulate and exhibit a 50% reduction in ferulic acid content in stem insoluble residues. DCF is specifically expressed in the epidermis throughout all green Arabidopsis organs. The DCF protein localizes to the cytosol, suggesting that the feruloylation of cutin monomers takes place in the cytoplasm.     

植物角质层内外蜡质的差异及其与抗逆性的关系

植物角质层是覆盖在植物地上部分的叶、花和非木质茎等器官表面的保护层,包括角质和蜡质。其中蜡质根据分布位置不同又分为表皮蜡质和内部蜡质。大量研究表明,表皮蜡质含量和结构在植物生长发育和抗逆性申发挥着重要作用。近年来有研究发现构成蜡质的成分在内外蜡质层中的分布存在差异,角质层蜡质成分影响植物抗逆性。本文针对角质层结构和内外蜡质差异性以及角质层结构和组成与植物抗逆性之间的关系进行了综述。     

Cutin deficiency in the tomato fruit cuticle consistently affects resistance to microbial infection and biomechanical properties, but not transpirational water loss

Plant cuticles are broadly composed of two major components: polymeric cutin and a mixture of waxes, which infiltrate the cutin matrix and also accumulate on the surface, forming an epicuticular layer. Although cuticles are thought to play a number of important physiological roles, with the most important being to restrict water loss from aerial plant organs, the relative contributions of cutin and waxes to cuticle function are still not well understood. Tomato ( Solanum lycopersicum ) fruits provide an attractive experimental system to address this question as, unlike other model plants such as Arabidopsis, they have a relatively thick astomatous cuticle, providing a poreless uniform material that is easy to isolate and handle. We identified three tomato mutants, cutin deficient 1 ( cd1 ), cd2 and cd3 , the fruit cuticles of which have a dramatic (95–98%) reduction in cutin content and substantially altered, but distinctly different, architectures. This cutin deficiency resulted in an increase in cuticle surface stiffness, and in the proportions of both hydrophilic and multiply bonded polymeric constituents. Furthermore, our data suggested that there is no correlation between the amount of cutin and the permeability of the cuticle to water, but that cutin plays an important role in protecting tissues from microbial infection. The three cd mutations were mapped to different loci, and the cloning of CD2 revealed it to encode a homeodomain protein, which we propose acts as a key regulator of cutin biosynthesis in tomato fruit.     

A permeable cuticle in Arabidopsis leads to a strong resistance to Botrytis cinerea

The plant cuticle composed of cutin, a lipid-derived polyester, and cuticular waxes covers the aerial portions of plants and constitutes a hydrophobic extracellular matrix layer that protects plants against environmental stresses. The botrytis-resistant 1 (bre1) mutant of Arabidopsis reveals that a permeable cuticle does not facilitate the entry of fungal pathogens in general, but surprisingly causes an arrest of invasion by Botrytis. BRE1 was identified to be long-chain acyl-CoA synthetase2 (LACS2) that has previously been shown to be involved in cuticle development and was here found to be essential for cutin biosynthesis. bre1/lacs2 has a five-fold reduction in dicarboxylic acids, the typical monomers of Arabidopsis cutin. Comparison of bre1/lacs2 with the mutants lacerata and hothead revealed that an increased permeability of the cuticle facilitates perception of putative elicitors in potato dextrose broth, leading to the presence of antifungal compound(s) at the surface of Arabidopsis plants that confer resistance to Botrytis and Sclerotinia. Arabidopsis plants with a permeable cuticle have thus an altered perception of their environment and change their physiology accordingly.     

The role of ABC transporters in cuticular lipid secretion

The aerial surfaces of plants are enveloped by a waxy cuticle, which among other functions serves as a barrier to limit non-stomatal water loss and defend against pathogens. The cuticle is a complex three-dimensional structure composed of cutin (a lipid polyester matrix) and waxes (very long chain fatty acid derivatives), which are embedded within and layered on top of the cutin matrix. Biosynthesis of cuticular lipids is believed to take place solely within aerial epidermal cells. Once synthesized, both the waxes and the cutin precursors must leave the cytoplasm, pass through the hydrophilic apoplastic space, and finally assemble to form the cuticle. These processes of secretion and assembly are essentially unknown. Initial steps toward our understanding of these processes were the characterization of CER5/ABCG12/WBC12 and more recently ABCG11/WBC11, a pair of ABC transporters required for cuticular lipid secretion. ABCG12 is involved in wax secretion, as mutations in this gene result in a lower surface-load of wax and a concomitant accumulation of lipidic inclusions within the epidermal cell cytoplasm. Mutations in ABCG11 result in a similar wax phenotype as cer5 and similar cytoplasmic inclusions. In contrast to cer5, however, abcg11 mutants also show significantly reduced cutin, post-genital organ fusions, and reduced growth and fertility. Thus, for the first time, a transporter is implicated in cutin accumulation. This review will discuss the secretion of cuticular lipids, focusing on ABCG12, ABCG11 and the potential involvement of other ABC transporters in the ABCG subfamily.     

植物角质层基因研究进展

角质层是形成于陆生植物表皮细胞壁外表面的脂质保水层。角质层的基本功能是保水,同时也在响应逆境胁迫、自我清洁及器官发育等方面发挥作用。角质层通常由角质和蜡质组成。角质是角质层的主要结构成分,其主要组分是聚酯。蜡质成分主要为极长链饱和脂肪酸及其衍生物。这些组分在内质网上合成后被转运到细胞表面,进一步形成完整的角质层结构。近年来通过对角质层相关突变体及相应基因的研究,人们对角质层在合成、转运、形成及调控等各个阶段都有了较为深入的认识。蜡质和角质的合成途径已在角质层相关基因功能的解释下逐渐浮出水面。有关角质层前体转运方面的研究,主要的突破在于ABCG全转运蛋白的发现和功能解析。在角质层形成的机理方面,角质层基因中的酯酶和脂酶类基因的研究有助于进一步认识这个复杂的过程。在基因调控方面,新的转录因子基因和角质层与环境之间的相互关系研究,也为已知的调控网络增加了新内容。该文综述了目前关于角质层相关基因的最新研究进展。     

RDR1 and SGS3, Components of RNA-Mediated Gene Silencing, Are Required for the Regulation of Cuticular Wax Biosynthesis in Developing Inflorescence Stems of Arabidopsis

The cuticle is a protective layer that coats the primary aerial surfaces of land plants and mediates plant interactions with the environment. It is synthesized by epidermal cells and is composed of a cutin polyester matrix that is embedded and covered with cuticular waxes. Recently, we have discovered a novel regulatory mechanism of cuticular wax biosynthesis that involves the ECERIFERUM7 (CER7) ribonuclease, a core subunit of the exosome. We hypothesized that at the onset of wax production, the CER7 ribonuclease degrades an mRNA specifying a repressor of CER3, a wax biosynthetic gene whose protein product is required for wax formation via the decarbonylation pathway. In the absence of this repressor, CER3 is expressed, leading to wax production. To identify the putative repressor of CER3 and to unravel the mechanism of CER7-mediated regulation of wax production, we performed a screen for suppressors of the cer7 mutant. Our screen resulted in the isolation of components of the RNA-silencing machinery, RNA-DEPENDENT RNA POLYMERASE1 and SUPPRESSOR OF GENE SILENCING3, implicating RNA silencing in the control of cuticular wax deposition during inflorescence stem development in Arabidopsis (Arabidopsis thaliana).     

Fine structure of the <Emphasis Type="Italic">Arabidopsis</Emphasis> stem cuticle: effects of fixation and changes over development

Main conclusion

The Arabidopsis cuticle, as observed by electron microscopy, consists primarily of the cutin/cutan matrix. The cuticle possesses a complex substructure, which is correlated with the presence of intracuticular waxes. The plant cuticle is composed of an insoluble polyester, cutin, and organic solvent soluble cuticular waxes, which are embedded within and coat the surface of the cutin matrix. How these components are arranged in the cuticle is not well understood. The Arabidopsis cuticle is commonly understood as ‘amorphous,’ lacking in ultrastructural features, and is often observed as a thin (~80–100 nm) electron-dense layer on the surface of the cell wall. To examine this cuticle in more detail, we examined cuticles from both rapidly elongating and mature sections of the stem and compared the preservation of the cuticles using conventional chemical fixation methods and high-pressure freezing/freeze-substitution (HPF/FS). We found that HPF/FS preparation revealed a complex cuticle substructure, which was more evident in older stems. We also found that the cuticle increases in thickness with development, indicating an accretion of polymeric material, likely in the form of the non-hydrolyzable polymer, cutan. When wax was extracted by chloroform immersion prior to sample preparation, the contribution of waxes to cuticle morphology was revealed. Overall, the electron-dense cuticle layer was still visible but there was loss of the cuticle substructure. Furthermore, the cuticle of cer6, a wax-deficient mutant, also lacked this substructure, suggesting that these fine striations were dependent on the presence of cuticular waxes. Our findings show that HPF/FS preparation can better preserve plant cuticles, but also provide new insights into the fine structure of the Arabidopsis cuticle.

     

ABC-type transporters and cuticle assembly: Linking function to polarity in epidermis cells

The aerial organs of plants are covered with a cuticle, a continuous layer overlaying the outermost cell walls of the epidermis. The cuticle is composed of two major classes of the lipid biopolymers: cutin and waxes, collectively termed cuticular lipids. Biosynthesis and transport of cuticular lipids occur predominantly in the epidermis cells. In the transport pathway, cuticular lipids are exported from their site of biosynthesis in the ER/plastid to the extracellular space through the plasma membrane and cell wall. Growing evidence suggests that ATP-binding cassette (ABC) transporters are implicated in transport of cuticular lipids across the plasma membrane of epidermal cells. The Arabidopsis ABC-type transporter protein CER5 (WBC12) was reported to act as a wax monomers transporter. In recent works, our group and others showed that a CER5-related protein, DESPERADO (DSO/WBC11), is required for cutin and wax monomers transport through the plasma membrane of Arabidopsis epidermis cells. Unlike the cer5 mutant, DSO loss-of-function had a profound effect on plant growth and development, particularly dwarfism, postgenital organ fusions, and altered epidermal cell differentiation. The partially overlapping function of CER5 and DSO and the fact that these proteins are half-size ABC transporters suggest that they might form a hetero-dimeric complex while transporting wax components. An intriguing observation was the polar localization of DSO in the distal part of epidermis cells. This polar expression might be explained by DSO localization within lipid rafts, specific plasma membrane microdomains which are associated with polar protein expression. In this review we suggest possible mechanisms for cuticular lipids transport and a link between DSO function and polar expression. Furthermore, we also discuss the subsequent transport of cuticular constituents through the hydrophobic cell wall and the possible involvement of lipid transfer proteins in this process.Key words: ABC transporter, cuticular lipids, polar expression, plasma membrane, epidermis     

The epidermis-specific extracellular BODYGUARD controls cuticle development and morphogenesis in Arabidopsis

The outermost epidermal cell wall is specialized to withstand pathogens and natural stresses, and lipid-based cuticular polymers are the major barrier against incursions. The Arabidopsis thaliana mutant bodyguard (bdg), which exhibits defects characteristic of the loss of cuticle structure not attributable to a lack of typical cutin monomers, unexpectedly accumulates significantly more cell wall-bound lipids and epicuticular waxes than wild-type plants. Pleiotropic effects of the bdg mutation on growth, viability, and cell differentiation are also observed. BDG encodes a member of the alpha/beta-hydrolase fold protein superfamily and is expressed exclusively in epidermal cells. Using Strep-tag epitope-tagged BDG for mutant complementation and immunolocalization, we show that BDG is a polarly localized protein that accumulates in the outermost cell wall in the epidermis. With regard to the appearance and structure of the cuticle, the phenotype conferred by bdg is reminiscent of that of transgenic Arabidopsis plants that express an extracellular fungal cutinase, suggesting that bdg may be incapable of completing the polymerization of carboxylic esters in the cuticular layer of the cell wall or the cuticle proper. We propose that BDG codes for an extracellular synthase responsible for the formation of cuticle. The alternative hypothesis proposes that BDG controls the proliferation/differentiation status of the epidermis via an unknown mechanism.     

Analysis of the aliphatic monomer composition of polyesters associated with Arabidopsis epidermis: occurrence of octadeca-cis-6, cis-9-diene-1,18-dioate as the major component

Although the surface waxes from Arabidopsis thaliana leaves and stems have been thoroughly characterized, the monomer composition of the polyesters of the cuticular membrane has not been analyzed. Delipidated Arabidopsis leaves or stems, when depolymerized under conditions to cleave polyesters, produced typical omega-hydroxy fatty acid cutin monomers such as 16-hydroxy-palmitate, 10,16-dihydroxy-palmitate and 18-hydroxy-9,10-epoxy-stearate. However, the major monomer was octadeca-cis-6, cis-9-diene-1,18-dioate, with lesser amounts of octadec-cis-9-ene-1,18-dioate and hexadeca-1,16-dioate. These dicarboxylates were found predominantly in epidermal peels from Arabidopsis stems and are therefore likely to be associated with the cuticular membrane. They were also found in analyses of canola leaves but were absent in tomato and apple fruit cutins. In the fad2-1 mutant line of Arabidopsis, which has reduced levels of linoleate and linolenate and elevated oleate in cytosolic phospholipids, the amount of octadeca-cis-6, cis-9-diene-1,18-dioate was 50% reduced, with a concomitant increase in octadec-cis-9-ene-1,18-dioate. In a fatb-ko line of Arabidopsis, where the availability of cytosolic palmitate is impaired, there was an 80% loss of C16 monomers and a compensating increase in C18 monomers. The presence of substantial amounts of dicarboxylates in cuticular membranes is unexpected. High amounts of aliphatic dicarboxylates are usually considered as an indicator of suberin, and are reported only as very minor components of cutin. The high level of polyunsaturation is also unusual in cuticles; saturated fatty acid monomers usually predominate, with lesser amounts of monounsaturates. These novel findings for Arabidopsis demonstrate that a broad range of monomer compositions are possible for polyesters of the epidermis.     

Transgenic Arabidopsis plants expressing a fungal cutinase show alterations in the structure and properties of the cuticle and postgenital organ fusions

A major structural component of the cuticle of plants is cutin. Analysis of the function of cutin in vivo has been limited because no mutants with specific defects in cutin have been characterized. Therefore, transgenic Arabidopsis plants were generated that express and secrete a cutinase from Fusarium solani f sp pisi. Arabidopsis plants expressing the cutinase in the extracellular space showed an altered ultrastructure of the cuticle and an enhanced permeability of the cuticle to solutes. In addition, pollen could germinate on fully differentiated leaves of cutinase-expressing plants but not on control leaves. These differences coincided with strong postgenital organ fusions. The junctions of the fusions contained pectic polysaccharides. As fused organs grew apart from each other, organ deformations and protrusions of epidermal cells developed at positions with high mechanical stress. These results demonstrate that an intact cutin layer not only is important for plant-environment interactions but also prevents fusions between different plant organs and is therefore necessary for normal epidermal differentiation and organ formation.     

Characterization of Arabidopsis ABCG11/WBC11, an ATP binding cassette (ABC) transporter that is required for cuticular lipid secretion

ABCG11/WBC11, an ATP binding cassette (ABC) transporter from Arabidopsis thaliana, is a key component of the export pathway for cuticular lipids. Arabidopsis wbc11 T-DNA insertional knock-out mutants exhibited lipidic inclusions inside epidermal cells similar to the previously characterized wax transporter mutant cer5, with a similar strong reduction in the alkanes of surface waxes. Moreover, the wbc11 knock-out mutants also showed defects not present in cer5, including post-genital organ fusions, stunted growth and a reduction in cutin load on the plant surface. A mutant line previously isolated in a forward genetics screen, called permeable leaves 1 (pel1), was identified as an allele of ABCG11/WBC11. The double knock-out wbc11 cer5 exhibited the same morphological and biochemical phenotypes as the wbc11 knock-out. A YFP-WBC11 fusion protein rescued a T-DNA knock-out mutant and was localized to the plasma membrane. These results show that WBC11 functions in secretion of surface waxes, possibly by interacting with CER5. However, unlike ABCG12/CER5, ABCG11/WBC11 is important to the normal process of cutin formation.     

Epicuticular wax structures on stems and comparison between stems and leaves – A survey

The cuticle, forming the outermost layer of plant tissues and being in direct contact with the environment, consists of waxes and cutin. Waxes are hydrophobic substances that are divided in two groups: intra- and epicuticular, depending on their localisation. Epicuticular waxes appear as smooth coverings, however, many plants also produce superimposed wax structures of a crystalline nature. While studies of waxes have almost exclusively focused on leaves, here a survey of epicuticular wax structures on stems is presented. The stem surface of 343 higher plant taxa, representing 80 families, was examined using scanning electron microscopy. The adaxial and abaxial surfaces of leaves of 319 taxa were also examined to determine the relationship between wax structures on stems and leaves. Wax structures are classified, described and discussed. The results of the study indicate that stems exhibit the same main wax crystal types that have been described for leaves. Seventy percent of the examined taxa produced wax crystals on their stems. In ∼24% of the taxa, wax crystals were absent on leaves and found only on stems. In plant taxa that produce wax crystals, 40% exhibit the same type on either side of their leaves and on their stem. However, a much stronger morphological similarity exists between crystal shapes present on the adaxial and abaxial surfaces of leaves than between those present on the stem and those on leaves. In general, these observations suggest that stems are quite different than leaves in terms of their epicuticular wax structures.