Development and application of thermo-sensitive magnetic immunomicrospheres for antibody purification

Ultrafine magnetite particles were prepared by a co-precipitation method. The poly-(styrene/N-isopropylacrylamide/methacrylic acid) latex particles containing ultrafine magnetite [magnetic P(St/NIPAM/MAA)] were prepared by two-step emulsifier-free emulsion polymerization. The minimum NaCl concentration for flocculation of these magnetic latex particles (critical flocculation concentration, CFC) decreased with increasing temperature. These temperature dependence of CFC, namely its thermo-sensitivity, originated from NIPAM. At a certain NaCl concentration, some of the magnetic latex particles showed reversible transition between flocculation and dispersion by controlling the temperature, and the thermo-flocculated magnetic latex particles were separated quickly in a magnetic field. Bovine serum albumin (BSA) was covalently immobilized onto the magnetic P(St/NIPAM/MAA) latex particles with high efficiency by the carbodiimide method. These thermo-sensitive magnetic immunomicrospheres were effective for the immunoaffinity purification of anti-BSA antibodies from antiserum.Correspondence to: A. Kondo     

Preparation of immobilized enzyme with high activity using affinity tag based on proteins A and G

Affinity tag AG consisting of immunoglobulin G (lgG)-binding domains of protein A from Staphylococcus aureus (EDABC) and those of protein G from Streptococcus strain G148 (C2C3) were used to facilitate immobilization of beta-galactosidase (betagal) from Escherichia coli. Poly(methylmethacrylate/N-isopropylacrylamide/methacrylic acid) [P(MMA/NIPAM/MAA)] and poly(styrene/N-isopropylacrylamide/methacrylic acid) [P(St/NIPAM/MAA)] latex particles, which show thermosensitivity, were used as support materals to prepare affinity adsorbents. Human gamma-globulin (HgammaGb), whose major fraction is lgG, was used as an affinity ligand and was covalently immobilized onto the both latex particles by the carbodiimide method under various conditions. A fusion protein, AGbetagal, was immobilized at pH 7.3 by the specific binding of affinity tag to these affinity adsorbents. The amount of adsorbed AGbetagal per unit amount of immobilized HgammaGb, namely, efficiency of ligand utilization, was strongly affected by the type of latex particles and pH value for HgammaGb immobilization. The efficiency of ligand utilization was maximum in the affinity adsorbents prepared at pH 6.0 to 7.0, and that in the HgammaGb-P(MMA/NIPAM/MAA) latex particles was high. This result could be explained by the conformation and orientation of immobilized HgammaGb molecules. Immobilized AGbetagal retained approximately 75% of its activity in solution and the binding is stable enough to allow repeated use. These results clearly demonstrate that combination of the affinity tag AG and the affinity adsorbents, based on the thermosensitive latex particles, offers a simple and widely applicable method for preparation of immobilized enzyme with high activity. (c) 1995 John Wiley & Sons, Inc.     

Immunological agglutination kinetics of latex particles with covalently immobilized antigens

Hen egg-white lysozyme (HEL), ovalbumin and bovine serum albumin (BSA) were covalently immobilized onto styrene/methacrylic acid [P(St/MAA)] copolymer latex particles by the carbodiimide method. The initial rates of the immunological agglutination of these particles initiated by the addition of antibodies were quantified by the absorbance changes at a wavelength of 680 nm. The sensitivity of the immunological agglutination of the particles with covalently immobilized antigens was higher than that with physically adsorbed ones. The immunological agglutination kinetics showed a similar tendency irrespective of antigen-antibody systems. That is, the initial agglutination rates (i) increased with increasing immobilized amount of antigens, (ii) were largest in the ionic strength range of 0.02 to 0.05 at pH 7 and (iii) decreased with increasing pH. These results indicate that the electrostatic interactions of particle-particle and particle-antibody are main factors which control the immunological agglutination. On the other hand, the sensitivity of the immunological agglutination increased with increasing molecular size of antigens.     

Adsorption of gamma-globulin, a model protein for antibody, on colloidal particles

The effect of surface properties on the adsorption of bovine gamma-globulin, a model protein for antibody, was studied. Polystyrene latex (PS), hydrophilic copolymer lattices of styrene/2-hydroxyethyl methacrylate [P(S/HEMA)], styrene/ methacrylic acid [P(S/MAA)] and methyl methacrylate/ 2-hydroxyethyl methacrylate [P(MMA/HEMA)], and colloidal silica were used. The adsorption isotherms of gamma-globulin on these colloidal particles were measured as a function of pH and ionic strength. The hydrophilic particles showed low affinities for gamma-globulin at alkaline pH, while PS showed high affinities for gamma-globulin over the whole range of pH and ionic strength. The gamma-globulin adsorption on hydrophilic particles was highly reversible with respect to the pH and ionic strength compared with that on PS. These differences indicate that the dominant driving forces of adsorption are related to the hydrophilicity of particles. The adsorption isotherms of all colloidal particles showed the plateau values, and the order of maximum values of plateau adsorption was P(S/MAA) > PS or P(S/HEMA), silica > P(MMA/HEMA). Thus, they were also affected by the charged groups and the hydrophilicity of the surfaces. On the other hand, the plateau values of all colloidal particles were more or less symmetrical with a maximum at around the isoelectric point of gamma-globulin at an ionic strength of 0.01. This behavior is attributed to the important role of the lateral interaction between the adsorbed molecules at low ionic strength.     

Latex particles with thermo-flocculation and magnetic properties for immobilization of alpha-chymotrypsin

Core-shell-type latex particles composed of styrene, N-isopropylacrylamide (NIPAAm), and N-acryloxysuccinimide (NAS) were synthesized by surfactant-free emulsion polymerization. The latex particles show thermo-flocculation behavior due to the presence of temperature-sensitive monomer NIPAAm and could be used for immobilization of alpha-chymotrypsin through covalent bonding with the reactive ester groups of NAS. Enzyme recycle could be accomplished in this immobilized enzyme system by sedimentation of the thermo-flocculated latex particles in 20 min at 30 degrees C by raising the salt (NaCl) concentration to 0.5 M. To further enhance the sedimentation rate, ultrafine magnetite particles were prepared and included during polymerization to produce magnetic temperature-sensitive latex particles (MTLP), which could be recovered 6 times faster after thermo-flocculation by applying a low magnetic field. However, a higher salt concentration was necessary to flocculate the MTLP under the same condition as a result of its increased surface hydrophilicity, which originates from different polymerization conditions and the incorporation of magnetite. The immobilized enzyme shows high activity even against macromolecular substrates (hemoglobin and casein) owing to limited diffusion resistance, with full activity retention for nonmagnetic latex but one-half reduction in activity if the magnetic property was introduced. Optimal enzyme immobilization pH and enzyme loading were determined, and properties of the immobilized enzyme were characterized. The immobilized enzyme was used in 10 repeated batch hydrolyses of casein with successive flocculation/dispersion cycles and showed less than 15% activity decrease at the end. Overall, introducing the magnetic property to the latex could effectively enhance the solid-liquid separation rate after thermo-flocculation and maintain enzyme activity after repeated use but adversely influence the activity of the immobilized enzyme.     

Permeability control of glucose-sensitive nanoshells

To study the permeability of hydrogel in nanoscale thickness, core-shell microgels with degradable poly( N-isopropylacrylamide) (PNIPAM) as the core and nondegradable phenylboronic acid (PBA)-conjugated poly( N-isopropylacrylamide) [P(NIPAM-PBA)] as the shell were designed and synthesized. Laser light scattering was used to study the volume phase transitions and core degradation behavior of the core-shell microgels. The release of the degraded core polymer chains can be conveniently followed by turbidity change. At room temperature, the degraded polymer segments diffuse freely out of the precursor poly( N-isopropylacrylamide-co-acrylic acid) gel shells in water. In contrast, the PBA-modified P(NIPAM-PBA) nanoshell can hold most of the degraded core polymer chains under the same conditions, thanks to its condensed structure at the collapsed state. Lowering the temperature or increasing pH increases the swelling degree of the P(NIPAM-PBA) shell, which provides methods to control its permeability by temperature and pH. The complexation of PBA groups with glucose also enhances the swelling of the nanoshell and, thus, increases its permeability. The understanding of how to control the permeability of the glucose-sensitive gel nanoshell in hollow microgel particles is very important for further design of self-regulated insulin delivery systems.     

Development of a temperature-sensitive composite hydrogel for drug delivery applications

To develop materials with improved controllability and specificity, we have investigated composite hydrogels with temperature-sensitive properties using photo cross-linking. Specifically, our novel composite materials are composed of nanoparticles made of poly(N-isopropylacrylamide) (PNIPAAm), temperature-sensitive hydrogels, and a photo cross-linker, poly(ethylene glycol) diacrylate (PEGDA). PNIPAAm particles were synthesized by emulsion polymerization and by varying concentration of four main factors: monomers (N-isopropylacrylamide), cross-linkers (N,N'-methylenebisacrylamide), surfactants (sodium dodecyl sulfate, SDS), and initiators (potassium persulfate). We found that the surfactant, SDS, was the most important factor affecting the particle size using the factorial design analysis. Additionally, both nano- and micro-PNIPAAm particles had excellent loading efficiency (>80% of the incubated bovine serum albumin (BSA)), and their release kinetics expressed an initial burst effect followed by a sustained release over time. Furthermore, BSA-loaded PNIPAAm nanoparticles were used to form three-dimensional gel networks by means of a photocuring process using a photo cross-linker, PEGDA, and a photoinitiator, Irgacure-2959 (I-2959). Results from scanning electron microscopy and in vitro BSA release studies from these hydrogels demonstrated that PNIPAAm nanoparticles were embedded inside the PEG polymeric matrix and the composite material was able to release BSA in response to changes in temperature. These PNIPAAm nanoparticle hydrogel networks may have advantages in applications of controlled drug delivery systems because of their temperature sensitivity and their ability of in situ photopolymerization to localize at the specific region in the body.     

Monosize poly(glycidyl methacrylate) beads for dye-affinity purification of lysozyme

Cibacron Blue F3GA was covalently attached onto monosize poly(glycidyl methacrylate) [poly(GMA)] beads for purification of lysozyme from chicken egg white. Monosize poly(GMA) beads, 1.6 microm in diameter, were produced by a dispersion polymerization technique. The content of epoxy groups on the surface of the poly(GMA) sample determined by the HCl-pyridine method (3.8 mmol/g). Cibacron Blue F3GA loading was 1.73 mmol/g. The monosize beads were characterized by elemental analysis, FTIR and SEM. Adsorption studies were performed under different conditions in a batch system (i.e., medium pH, protein concentration, temperature and ionic strength). Maximum lysozyme adsorption amount of poly(GMA) and poly(GMA)-Cibacron Blue F3GA beads were 1.6 and 591.7 mg/g, respectively. The applicability of two kinetic models including pseudo-first order and pseudo-second order model was estimated on the basis of comparative analysis of the corresponding rate parameters, equilibrium adsorption capacity and correlation coefficients. Results suggest that chemisorption processes could be the rate-limiting step in the adsorption process. It was observed that after 10 adsorption-elution cycle, poly(GMA)-Cibacron Blue F3GA beads can be used without significant loss in lysozyme adsorption capacity. Purification of lysozyme from egg-white was also investigated. Purification of lysozyme was monitored by determining the lysozyme activity using Micrococcus lysodeikticus as substrate. The purity of the eluted lysozyme was analyzed by SDS-PAGE and found to be 88% with recovery about 79%. The specific activity of the eluted lysozyme was high as 43,600 U/mg.     

Novel stimuli-responsive micelle self-assembled from Y-shaped P(UA-Y-NIPAAm) copolymer for drug delivery

A new amphiphilic Y-shaped copolymer, comprised of hydrophobic poly(undecylenic acid) (PUA) and hydrophilic poly(N-isopropylacrylamide) (PNIPAAm), was designed and synthesized. A cytotoxicity study revealed that P(UA-Y-NIPAAm) copolymers did not exhibit apparent inhibition impact on the proliferation of cells when the concentration of the copolymer was below 1000 mg/L. Characterization demonstrated that the P(UA-Y-NIPAAm) copolymer is thermosensitive with a lower critical solution temperature (LCST) of 31 degrees C. In water, the P(UA-Y-NIPAAm) copolymer would self-assemble into micelles with a critical micelle concentration (CMC) of 20 mg/L. Self-assembled P(UA-Y-NIPAAm) micelles exhibited a nanospherical morphology of 40 to approximately 80 nm in size. The controlled drug release behavior of the P(UA-Y-NIPAAm) micelles was further investigated, and self-assembled micelles exhibited improved properties in controlled drug release.     

Flocculation of Aspergillus terreus with polyelectrolyte complex and production of itaconic acid with the flocculated mycelia

Mycelia from Aspergillus terreus K 26 were flocculated with a polyelectrolyte complex consisting of potassium poly9vinyl alcohol) sulfate (KPVS) and poly(diallyldimethyl-ammonium chloride) (PDDA) by three different methods: (a) PDDA was added into the broth obtained from precultivation of the hyphal inoculum in the presence of KPVS; (b) use of KPVS and PDDA was reversed from that in method a; (c) after the precultivation in the absence of the polymer, the mycelia were harvested, dispersed in 0.1 M phosphate buffer containing PDDA, then flocculated by addition of KPVS. The three types of the flocculated mycelia were investigated concerning growth and itaconic acid production in shake flask cultures. Viscosity and sedimentation were further examined to characterize the flocculated mycelial broths. A slight inhibition caused by flocculation on growth and acid production was observed at the beginning of repeated cultivation, but this was eliminated when cultivation in the fresh medium was repeated. There was no marked difference in the specific rates of acid production between fre and flocculated cells. Viscosity of the flocculated mycelial system was close to that of the medium, even while maintaining a cell concentration of 2 g/dl. The poor sedimentation of mycelia was favorably imporved with these flocculation methods, especially with methods b and c.     

Multifunctional organic–inorganic composite luminescent nanospheres

A simple general strategy was successfully developed for the preparation of magnetic–luminescent multifunctional nanocomposites by incorporating fluorescent (pyrene) and magnetic (Fe₃O₄) components simultaneously into a poly(styrene‐co‐methacrylic acid) [poly(St‐co‐MAA)] copolymer matrix. The nanospheres so prepared were characterized using scanning electron microscopy (SEM), powder X‐ray diffraction (XRD) and Fourier transform infrared (FTIR) analysis. The prepared magnetic–fluorescent inorganic–organic nanocomposites have excellent magnetic and photoluminescent properties. They can be used in magnetic separation of trace amounts of sample, fluorescence detection and imaging applications, including magnetic resonance imaging (MRI) and fluorescence imaging. The fluorescence quenching of the nanospheres in the presence of different amounts of Cu²⁺ ions was also investigated. Under optimal experimental conditions, the relative fluorescence intensity of the composite nanosphere colloidal solution is proportional to the concentration of Cu²⁺ ions, which indicates that these multifunctional nanocomposites can be used for the magnetic separation and fluorescence detection of Cu²⁺ ions. Copyright © 2011 John Wiley & Sons, Ltd.     

The aggregation behaviour of protein-coated particles: a light scattering study

The different mechanisms involved in the aggregation of spherical latex particles coated with bovine serum albumin (BSA) have been studied using static and dynamic light scattering. These techniques assess the fractal dimension of the aggregates and their mean hydrodynamic radius. Particles with different degrees of surface coverage have been prepared. The net charge of the covered particles has been modified by varying the pH of the aqueous phase. The aggregation rate was measured and used to determine the importance of the different aggregation mechanisms that are responsible for these types of flocculation processes. At low and intermediate degrees of surface coverage, bridging flocculation is the principal aggregation mechanism irrespective of the electrical state of the protein-particle complexes. At high degree of surface coverage, however, weak flocculation is important only when the BSA molecules are at their isoelectric point.     

Purification of fusion proteins using affinity microspheres in aqueous two-phase systems

Affinity microspheres were prepared by immobilizing human -globulin (HGb) onto carboxylated poly (styrene/acrylamide) latex particles [P(St/AAm)-H; average diameter 0.33 m], which were prepared by emulsifier-free emulsion polymerization. HGB was covalently immobilized onto the latex particles with high efficiency by the carbodiimide method. A fusion protein (ZZB1B2) of immunoglobulin G and albumin-binding domains (ZZ and B1B2, respectively) was expressed intracellularly and extracellularly in Escherichia coli and was purified by the affinity microspheres. In poly (ethylene glycol) (PEG)/potassium phosphate aqueous two-phase system, the affinity microspheres were partitioned into the PEG-rich top phase, while cells and cell debris of E. coli were displaced into the salt-rich bottom phase. Therefore, ZZB1B2 was directly purified from cell disintegrate or culture broth by combining the affinity microspheres with the aqueous two-phase partitioning, and its purity was almost the same as that purified by conventional affinity chromatography. Therefore, by this purification method, the primary purification process and the subsequent high resolution purification process are combined, and the number of purification steps can be reduced. Correspondence to: A. Kondo     

PDADMAC flocculation of Chinese hamster ovary cells: Enabling a centrifuge-less harvest process for monoclonal antibodies

High titer (>10 g/L) monoclonal antibody (mAb) cell culture processes are typically achieved by maintaining high viable cell densities over longer culture durations. A corresponding increase in the solids and sub-micron cellular debris particle levels are also observed. This higher burden of solids (≥15%) and sub-micron particles typically exceeds the capabilities of a continuous centrifuge to effectively remove the solids without a substantial loss of product and/or the capacity of the harvest filtration train (depth filter followed by membrane filter) used to clarify the centrate. We discuss here the use of a novel and simple two-polymer flocculation method used to harvest mAb from high cell mass cell culture processes. The addition of the polycationic polymer, poly diallyldimethylammonium chloride (PDADMAC) to the cell culture broth flocculates negatively-charged cells and cellular debris via an ionic interaction mechanism. Incorporation of a non-ionic polymer such as polyethylene glycol (PEG) into the PDADMAC flocculation results in larger flocculated particles with faster settling rate compared to PDADMAC-only flocculation. PDADMAC also flocculates the negatively-charged sub-micron particles to produce a feed stream with a significantly higher harvest filter train throughput compared to a typical centrifuged harvest feed stream. Cell culture process variability such as lactate production, cellular debris and cellular densities were investigated to determine the effect on flocculation. Since PDADMAC is cytotoxic, purification process clearance and toxicity assessment were performed.     

Reversible meso-scale smart polymer--protein particles of controlled sizes

Functionalized beads and particles in the size range of tens to hundreds of nanometers (nano- to meso-scale) are finding increased applications in the bioanalytical field. We show here that conjugates of streptavidin and the temperature-responsive polymer poly(N-isopropylacrylamide) (PNIPAAm), synthesized with low polydispersities by reversible addition--fragmentation chain transfer (RAFT) polymerization, rapidly formed mesoscale polymer--protein particles above the lower critical solution temperature (LCST). The average hydrodynamic diameters of these particles could be controlled between 250 nm to 900 nm by the choice of conjugate concentration and polymer molecular weight, and/or through control of the rate of temperature change. Once formed, the biohybrid particles were found to be stable for >16 h at the controlled size, unlike the free PNIPAAm which continued to aggregate and grow over time into very large and polydisperse aggregates. The reversibility between the smart polymer--protein particles and the free polymer--protein conjugates opens potential uses in traditional diagnostic formats and in microfluidic formats where the differential diffusive and physical properties might be exploited for separations, analyte concentration, and signal generation.     

Fabrication and characterization of tosyl‐activated magnetic and nonmagnetic monodisperse microspheres for use in microfluic‐based ferritin immunoassay

This article describes the preparation of tosyl‐activated nonmagnetic poly(2‐hydroxyethyl methacrylate‐co‐glycidyl methacrylate) [P(HEMA‐GMA)] microspheres by dispersion polymerization and tosyl‐activated magnetic poly(2‐hydroxyethyl methacrylate‐co‐ethylene dimethacrylate) [P(HEMA‐EDMA)] microspheres by multistep swelling polymerization method and precipitation of iron oxide inside the pores. These new approaches show that monodisperse microspheres, 2.3 µm, respectively 4.1 µm, in diameter can be produced in high yields avoiding aggregation and with the advantage of being free of aromatic moieties. To demonstrate their potential for diagnostic applications, both types of microparticles have been coated with capture and detection antibodies (DAs), respectively. Immunoassay protocols have then been developed for the dosage of ferritin using an automated affinity platform combining microchannel chips and electrochemical detection. The assay performance using the above magnetic microspheres has been compared with that obtained with commercial tosyl‐activated beads. Finally, the possibility to combine functionalized magnetic and nonmagnetic microspheres has been evaluated in view of amplifying the number of enzymatic labels in the immuno‐complex. At a ferritin concentration of 119.6 ng/mL, a signal‐to‐noise ratio of 150.5 is obtained using 0.2 mg/mL of anti‐ferritin‐coated P(HEMA‐GMA)‐DA microspheres against a value of 158.8 using free DA in solution. © 2013 American Institute of Chemical Engineers Biotechnol. Prog., 29: 532–542, 2013     

Determination of the enantiomerization energy barrier of some 3-hydroxy-1,4-benzodiazepine drugs by supercritical fluid chromatography

In this study, nucleotide adsorption-desorption behaviour of boronic acid-carrying uniform, porous particles was investigated. The particles were produced by a "multi-step microsuspension polymerization" in the form of poly(styrene-vinylphenyl boronic acid-divinylbenzene) terpolymer. In the first step of the production method, uniform polystyrene latex particles (6.2 microm in size) were obtained by dispersion polymerization. These particles were first swollen by a low molecular mass organic agent (i.e. dibutylphthalate, DBP) and then by a monomer mixture including styrene (S), 4-vinylphenyl boronic acid (VPBA) and divinylbenzene (DVB). The particle uniformity was protected in both swelling stages by adjusting DBP/polystyrene latex and monomer mixture/polystyrene latex ratios. Polymerization of the monomer mixture in the swollen seed particles provided boronic acid-carrying uniform, porous particles 11-12 microm in size. To have uniform particles with different porosities and boronic acid contents, the feed concentration of boronic acid-carrying monomer and the monomer/seed latex ratio were changed. The particles were tried as sorbent for the adsorption of a model nucleotide (i.e., beta-nicotinamide adenine dinucleotide, beta-NAD). In the beta-NAD adsorption experiments, the maximum equilibrium adsorption was obtained at pH 8.5 which was very close to pKa of boronic acid. The incorporation of boronic acid functionality provided a significant increase in the beta-NAD adsorption. In contrast to plain poly(styrene-co-divinylbenzene) particles, four-fold higher beta-NAD adsorption was obtained with the boronic acid functionalized particles. Beta-NAD was desorbed from the particles with the yields higher than 90% by weight.     

Synthesis and characterization of injectable poly(N-isopropylacrylamide-co-acrylic acid) hydrogels with proteolytically degradable cross-links

Hydrogels composed of N-isopropylacrylamide (NIPAAm) and acrylic acid (AAc) were prepared by redox polymerization with peptide cross-linkers to create an artificial extracellular matrix (ECM) amenable for testing hypotheses regarding cell proliferation and migration in three dimensions. Peptide degradable cross-linkers were synthesized by the acrylation of the amine groups of glutamine and lysine residues within peptide sequences potentially cleavable by matrix metalloproteinases synthesized by mammalian cells (e.g., osteoblasts). With the peptide cross-linker, loosely cross-linked poly(N-isopropylacrylamide-co-acrylic acid) [P(NIPAAm-co-AAc)] hydrogels were prepared, and their phase transition behavior, lower critical solution temperature (LCST), water content, and enzymatic degradation properties were investigated. The peptide-cross-linked P(NIPAAm-co-AAc) hydrogels were pliable and fluidlike at room temperature and could be injected through a small-diameter aperture. The LCST of peptide-cross-linked hydrogel was influenced by the monomer ratio of NIPAAm/AAc but not by cross-linking density within the polymer network. A peptide-cross-linked hydrogel with a 97/3 molar ratio of NIPAAm/AAc exhibited a LCST of approximately 34.5 degrees C. Swelling was influenced by NIPAAm/AAc monomer ratio, cross-linking density, and swelling media; however, all hydrogels maintained more than 90% water even at 37 degrees C. In enzymatic degradation studies, breakdown of the peptide-cross-linked P(NIPAAm-co-AAc) hydrogels was dependent on both the concentration of collagenase and the cross-linking density. These results suggest that peptide-cross-linked P(NIPAAm-co-AAc) hydrogels can be tailored to create environmentally-responsive artificial extracellular matrixes that are degraded by proteases.     

Refolding of recombinant human interferon gamma inclusion bodies in vitro assisted by colloidal thermo-sensitive poly(N-isopropylacrylamide) brushes grafted onto the surface of uniform polystyrene cores

Recombinant human interferon gamma (rhIFN-γ) is a protein with great potential for clinical therapy, but rhIFN-γ expressed in Escherichia coli is usually in the form of insoluble inclusion bodies which should be refolded in vitro. A novel type of hairy particles (PNIPAM-grafted-PS) consisted of submicron polystyrene cores and brushes of thermo-sensitive poly(N-isopropylacrylamide) grafted onto the cores was prepared and then applied to assist the refolding of rhIFN-γ in vitro. Two kinds of PNIPAM-grafted-PS particles with different thickness of brush layer (55 nm and 110 nm) were synthesized, which were spherical shape with good dispersion properties and the LCST was about 33 °C. The effect of thickness of brush layer, particle concentration and temperature on the refolding process was investigated, it was shown that particles with larger thickness of brush layer were more effective and the final rhIFN-γ activity could be up to more than 21 times of that in dilution refolding when initial rhIFN-γ concentration was 50 μg/mL. The optimal refolding condition was the concentration ratio of particle to rhIFN-γ 1:1 and refolding temperature of 15 °C. All results above demonstrated that PNIPAM-grafted-PS particles could assist rhIFN-γ refolding which presented an alternative way to facilitate recombinant protein refolding in vitro.     

The immobilization of enzymes and cells of Bacillus stearothermophilus onto poly(maleic anhydride/styrene)-Co-polyethylene and poly(maleic anhydride/vinyl acetate)-Co-polyethylene

The graft copolymer, poly(maleic anhydride/styrene)-co-polyethylene was prepared. The copolymer immobilized bovine serum albumin (BSA), but the amount coupled appeared to be effected by the amount of styrene in the graft copolymer, temperature, and pH of the coupling medium. Competition existed between hydrolysis of the grafted anhydride groups and the protein. A graft copolymer with 66% add-on immobilized 4.5 mg/glucose oxidase/g copolymer, 4.6 mg alkaline phosphates/g copolymer and 0.2 mg cell of Bacillus stearothermophilus/g copolymer. A number of copolymers containing poly(maleic anhydride/vinyl acetate)-co-polyethylene were prepared to cover a range of grafting levels. These immobilized larger quantities of BSA, alkaline phosphatase, and cells of B. stearothermophilus than did the styrene graft copolymer. The copolymer was also hydrolyzed to release the hydroxyl group from the poly(vinyl acetate) component of the grafted chains. Using p-benzoquinone as the "activating agent," the copolymer coupled to BSA and to acid phosphatase. Using p-toluene-sulfonyl chloride, the copolymer was very effective in immobilizing trypsin.