Contributing factors to performance of a medicine ball explosive power test: a comparison between jump and nonjump athletes

The present study examined the factors contributing to performance of a backward overhead medicine ball throw (B-MBT) across 2 types of athletes. Twenty male volleyball players (jump athletes) and 20 wrestlers (nonjump athletes) were evaluated on 4 measures of power, including B-MBT, chest medicine ball throw (C-MBT), countermovement vertical jump (CMJ), and power index (PI). The athletes also completed 3 measures of strength: a 1-repetition-maximum (1RM) bench press (BP), a 1RM leg press (LP), and combined BP + LP strength. Jump athletes demonstrated greater absolute scores for CMJ, C-MBT, and B-MBT (p < 0.05), whereas nonjump athletes demonstrated greater strength scores for BP and for BP + LP (p < 0.05). When performances were examined on a relative basis, jump athletes achieved superior scores for C-MBT (p < 0.05), whereas nonjump athletes had greater scores for BP, LP, and BP + LP (p < 0.05). For both groups, B-MBT had strong correlations with PI (r = 0.817 [jump] and 0.917 [nonjump]), whereas for C-MBT, only nonjump athletes demonstrated a strong correlation (r = 0.842). When expressed in relative terms, B-MBT was strongly correlated with C-MBT (r = 0.762 [jump] and 0.835 [nonjump]) and CMJ (r = 0.899 [jump] and 0.945 [nonjump]). Only nonjump athletes demonstrated strong correlations with strength for absolute LP (r = 0.801) and BP + LP (r = 0.810) strength. The interaction of upper- and lower-body strength and power in the performance of a B-MBT appears complex, with the contributing factors differing for athletes with divergent skill sets and performance demands.     

Prediction of one repetition maximum strength from multiple repetition maximum testing and anthropometry

The purpose of this study was to quantify the decrease in the load lifted from 1 to 5, 10, and 20 repetitions to failure for the flat barbell bench press (chest press; CP) and plate-loaded leg press (LP). Furthermore, we developed prediction equations for 1 repetition maximum (RM) strength from the multiple RM tests, including anthropometric data, gender, age, and resistance training volume. Seventy subjects (34 men, 36 women), 18-69 years of age, completed 1, 5, 10, and 20RM testing for each of the CPs and LPs. Regression analyses of mean data revealed a nonlinear decrease in load with increasing repetition number (CP: linear S(y.x) = 2.6 kg, nonlinear S(y.x) = 0.2 kg; LP: linear S(y.x) = 11.0 kg, nonlinear S(y.x) = 2.6 kg, respectively). Multiple regression analyses revealed that the 5RM data produced the greatest prediction accuracy, with R(2) data for 5, 10, and 20RM conditions being LP: 0.974, 0.933, 0.915; CP: 0.993, 0.976, and 0.955, respectively. The regression prediction equations for 1RM strength from 5RM data were LP: 1RM = 1.0970 x (5RM weight [kg]) + 14.2546, S(y.x) = 16.16 kg, R(2) = 0.974; CP: 1RM = 1.1307 x (5RM weight) + 0.6999, S(y.x) = 2.98 kg, R(2) = 0.993. Dynamic muscular strength (1RM) can be accurately estimated from multiple repetition testing. Data reveal that no more than 10 repetitions should be used in linear equations to estimate 1RM for the LP and CP actions.     

A method for predicting maximal strength in collegiate women athletes

The purpose of this study was to develop a regression equation capable of accurately predicting a 1 repetition maximum bench press in collegiate women athletes. The findings of this study could benefit future women athletes by providing coaches and trainers with an easy method of determining maximum upper body strength in women athletes. Sixty-five University of Georgia NCAA Division 1 women athletes from 9 different sports were measured prior to the start of their season utilizing 2 repetition tests to fatigue (25 kg: REPS55; 31.8 kg: REPS70) and a 1 repetition maximum (1RM) bench press test in random order. Other independent variables that were used with a submaximal weight to predict 1RM were total body weight, lean body mass (LBM), height, and percent body fat. The variables of REPS70 and LBM were the best predictors of 1RM utilizing Pearson product correlations (r = 0.909, p = 0.000; r = 0.445, p = 0.000) and multiple regression results (R(2) = 0.834, p = 0.000) for this population. The results from this study indicate muscular endurance repetitions using an absolute weight of 31.8 kg in conjunction with LBM can be used to accurately predict 1RM bench press strength in collegiate women athletes.     

Training leading to repetition failure enhances bench press strength gains in elite junior athletes

The purpose of this study was to investigate the importance of training leading to repetition failure in the performance of 2 different tests: 6 repetition maximum (6RM) bench press strength and 40-kg bench throw power in elite junior athletes. Subjects were 26 elite junior male basketball players (n = 12; age = 18.6 +/- 0.3 years; height = 202.0 +/- 11.6 cm; mass = 97.0 +/- 12.9 kg; mean +/- SD) and soccer players (n = 14; age = 17.4 +/- 0.5 years; height = 179.0 +/- 7.0 cm; mass = 75.0 +/- 7.1 kg) with a history of greater than 6 months' strength training. Subjects were initially tested twice for 6RM bench press mass and 40-kg Smith machine bench throw power output (in watts) to establish retest reliability. Subjects then undertook bench press training with 3 sessions per week for 6 weeks, using equal volume programs (24 repetitions x 80-105% 6RM in 13 minutes 20 seconds). Subjects were assigned to one of two experimental groups designed either to elicit repetition failure with 4 sets of 6 repetitions every 260 seconds (RF(4 x 6)) or allow all repetitions to be completed with 8 sets of 3 repetitions every 113 seconds (NF(8 x 3)). The RF(4 x 6) treatment elicited substantial increases in strength (7.3 +/- 2.4 kg, +9.5%, p < 0.001) and power (40.8 +/- 24.1 W, +10.6%, p < 0.001), while the NF(8 x 3) group elicited 3.6 +/- 3.0 kg (+5.0%, p < 0.005) and 25 +/- 19.0 W increases (+6.8%, p < 0.001). The improvements in the RF(4 x 6) group were greater than those in the repetition rest group for both strength (p < 0.005) and power (p < 0.05). Bench press training that leads to repetition failure induces greater strength gains than nonfailure training in the bench press exercise for elite junior team sport athletes.     

Changes in muscle architecture and performance during a competitive season in female softball players

ABSTRACT: Nimphius, S, McGuigan, MR, and Newton, RU. Changes in muscle architecture and performance during a competitive season in female softball players. J Strength Cond Res 26(10): 2655-2666, 2012-The purpose of this research was (a) to examine the performance changes that occur in elite female softball players during 20 weeks of softball training (that included 14 weeks of periodized resistance training [RT]) and (b) to examine the relationship between percent change (%change) in muscle architecture variables and %change in strength, speed, and change of direction performance. Ten female softball players (age = 18.1 ± 1.6 years, height = 166.5 ± 8.9 cm, weight = 72.4 ± 10.8 kg) from a state Australian Institute of Sport softball team were tested for maximal lower-body strength using a 3 repetition maximum for a predicted 1 repetition maximum (1RM) and peak force, peak velocity (PV), and peak power (PP) were measured during jump squats (JS) unloaded and loaded. In addition, the first base (1B) and the second base (2B) sprint performance, change of direction (505) on dominant (D) and nondominant (ND) sides, aerobic capacity, and muscle architecture characteristics of vastus lateralis (VL) including muscle thickness (MT), fascicle length (FL), and pennation angle (θp) were examined. The testing sessions occurred pre, mid, and post training (total 20 week pre- and in-season training period). Changes over time were analyzed by repeated-measures analysis of variance. The relationship between %change in muscle architecture variables and strength, speed, and change of direction variables from pre to post were assessed by Pearson product-moment correlation coefficient. Significant improvements in PV and PP occurred at all JS loads pre- to mid-testing and pre- to post-testing. Significant increases occurred pre-post in absolute 1RM, relative 1RM, 505 ND, and 2B sprint. The strongest relationships were found between %change in VL MT and 1B sprint (r = -0.80, p = 0.06), %change in VL FL and 2B sprint (r = -0.835, p = 0.02), and %change in relative 1RM and 505 D (r = -0.70, p = 0.04). In conclusion, gains in strength, power, and performance can occur during the season in elite softball players who are also engaged in a periodized RT program. Furthermore, changes in performance measures are associated with changes in muscle architecture.     

Using squat testing to predict training loads for the deadlift, lunge, step-up, and leg extension exercises

The purpose of this study was to determine whether there is a linear relationship between the squat and a variety of quadriceps resistance training exercises for the purpose of creating prediction equations for the determination of quadriceps exercise loads based on the squat load. Six-repetition maximums (RMs) of the squat, as well as four common resistance training exercises that activate the quadriceps including the deadlift, lunge, step-up, and leg extension, were determined for each subject. Subjects included 21 college students. Data were evaluated using linear regression analysis to predict quadriceps exercise loads from 6RM squat data and were cross-validated with the prediction of sum of squares statistic. Analysis of the data revealed that the squat is a significant predictor of loads for the dead lift (R2 = 0.81, standard error of the estimate [SEE] = 12.50 kg), lunge (R2 = 0.62, SEE = 12.57 kg), step-up (R2 = 0.71, SEE = 9.58 kg), and leg extension (R2=0.67, SEE = 10.26 kg) exercises. Based on the analysis of the data, the following 6RM prediction equations were devised for each exercise: (a) deadlift load = squat load (0.83) + 14.92 kg, (b) lunge load = squat load (0.52) + 14.82 kg, (c) step-up load = squat load (0.50) + 3.32 kg, and (d) leg extension load = squat load (0.48) + 9.58 kg. Results from testing core exercises such as the squat can provide useful data for the assignment of loads for other exercises.     

Trunk muscle activity during stability ball and free weight exercises

The purpose of this investigation was to compare trunk muscle activity during stability ball and free weight exercises. Nine resistance-trained men participated in one testing session in which squats (SQ) and deadlifts (DL) were completed with loads of approximately 50, 70, 90, and 100% of one-repetition maximum (1RM). Isometric contractions during 3 stability ball exercises (quadruped (QP), pelvic thrust (PT), ball back extension (BE)) were also completed. During all exercises, average integrated electromyography (IEMG) from the rectus abdominus (RA), external oblique (EO), longissimus (L1) and multifidus (L5) was collected and analyzed. Results demonstrate that when expressed relative to 100% DL 1RM, muscle activity was 19.5 +/- 14.8% for L1 and 30.2 +/- 19.3% for L5 during QP, 31.4 +/- 13.4% for L1 and 37.6 +/- 12.4% for L5 during PT, and 44.2 +/- 22.8% for L1 and 45.5 +/- 21.6% for L5 during BE. IEMG of L1 during SQ and DL at 90 and 100% 1RM, and relative muscle activity of L5 during SQ and DL at 100% 1RM was significantly greater (P < or = 0.05) than in the stability ball exercises. Furthermore, relative muscle activity of L1 during DL at 50 and 70% 1RM was significantly greater than in QP and PT. No significant differences were observed in RA and EO during any of the exercises. In conclusion, activity of the trunk muscles during SQs and DLs is greater or equal to that which is produced during the stability ball exercises. It appears that stability ball exercises may not provide a sufficient stimulus for increasing muscular strength or hypertrophy; consequently, the role of stability ball exercises in strength and conditioning programs is questioned. SQs and DLs are recommended for increasing strength and hypertrophy of the back extensors.     

Relationship between upper-body strength and bat swing speed in high-school baseball players

This study aimed to clarify the relationship between upper-body strength and bat swing speed in high-school baseball players and to examine the physical characteristics of home run hitters (sluggers). The subjects were 30 male high-school baseball players with national tournament experience at the Koshien Stadium. Bat swing speed exerted by full effort was measured with a microwave-type speed-measuring instrument. One-repetition maximum (1RM) of a bench press (BP), BP power (bench power) using a light load (30 kg), and isokinetic chest press (0.4, 0.8, 1.2 m·s(-1)) were measured as upper-body strength. The relationships between bat swing speed and upper-body strength values were examined. Additionally, the t-test was used to reveal the mean differences between 14 home run hitters (group A) and 16 mediocre hitters (group B) for each measurement value. The bat swing speed showed significant and middle correlations with the 1RM BP (r = 0.59), bench power (0.41), and isokinetic chest press (0.48-0.55). Group A had significantly higher values in bench power and isokinetic chest press (high-speed) per kilogram of body weight than did group B. The swing speed showed significant correlations (r = 0.62) with the 1RM BP in group B but not in group A. In conclusion, to improve the hitting power of high-school baseball players, it may also be important to develop bench power with light loads in addition to 1RM BP.     

A modified YMCA bench press test as a predictor of 1 repetition maximum bench press strength

This study evaluated the influence of cadence on the Young Men's Christian Association (YMCA) bench press test for predicting 1 repetition maximum (1RM) bench press test performance. Fifty-eight medical students (37 men, 21 women) were evaluated for anthropometric variables (age, height, weight, fat-free mass, and percent fat), 1RM bench press, and 2 cadence tests of muscular endurance performed at cadences of 30 and 60 repetitions per minute (reps.min(-1)). Each test was performed on a separate day, with 5 days rest in between. There was no significant difference among the number of repetitions performed at each cadence by men, whereas women performed significantly more repetitions at the slower cadence. Repetitions at either cadence were good predictors of 1RM bench press in both genders (men: 30 reps.min(-1), r(2) = 0.757, standard error of the estimate [SEE] = 8.0 kg; 60 reps.min(-1), r(2) = 0.884, SEE = 8.2 kg; women: 30 reps.min(-1), r(2) = 0.754, SEE = 3.1 kg; 60 reps.min(-1), r(2) = 0.816, SEE = 2.7 kg). The addition of anthropometric dimensions to the regression equations did not improve predictive accuracy. Using both fast and slow cadences, the YMCA bench press test can provide a valid estimation of 1RM performance in untrained young men and women.     

Prediction of circulatory equilibrium in response to changes in stressed blood volume

Accurate prediction of cardiac output (CO), left atrial pressure (PLA), and right atrial pressure (PRA) is a prerequisite for management of patients with compromised hemodynamics. In our previous study (Uemura et al. Am J Physiol Heart Circ Physiol 286: H2376-H2385, 2004), we demonstrated a circulatory equilibrium framework, which permits the prediction of CO, PLA, and PRA once the venous return surface and integrated CO curve are known. Inasmuch as we also showed that the surface can be estimated from single-point CO, PLA, and PRA measurements, we hypothesized that a similar single-point estimation of the CO curve would enable us to predict hemodynamics. In seven dogs, we measured the PLA-CO and PRA-CO relations and derived a standardized CO curve using the logarithmic function CO = SL[ln(PLA - 2.03) + 0.80] for the left heart and CO = SR[ln(PRA - 2.13) + 1.90] for the right heart, where SL and SR represent the preload sensitivity of CO, i.e., pumping ability, of the left and right heart, respectively. To estimate the integrated CO curve in each animal, we calculated SL and SR from single-point CO, PLA, and PRA measurements. Estimated and measured CO agreed reasonably well. In another eight dogs, we altered stressed blood volume (-8 to +8 ml/kg of reference volume) under normal and heart failure conditions and predicted the hemodynamics by intersecting the surface and the CO curve thus estimated. We could predict CO [y = 0.93x + 6.5, r2 = 0.96, standard error of estimate (SEE) = 7.5 ml.min(-1).kg(-1)], PLA (y = 0.90x + 0.5, r2= 0.93, SEE = 1.4 mmHg), and PRA (y = 0.87x + 0.4, r2= 0.91, SEE = 0.4 mmHg) reasonably well. In conclusion, single-point estimation of the integrated CO curve enables accurate prediction of hemodynamics in response to extensive changes in stressed blood volume.     

Relationship between countermovement jump performance and multijoint isometric and dynamic tests of strength

The purpose of this investigation was to determine the relationship between countermovement vertical jump (CMJ) performance and various methods used to assess isometric and dynamic multijoint strength. Twelve NCAA Division I-AA male football and track and field athletes (age, 19.83 +/- 1.40 years; height, 179.10 +/- 4.56 cm; mass, 90.08 +/- 14.81 kg; percentage of body fat, 11.85 +/- 5.47%) participated in 2 testing sessions. The first session involved 1 repetition maximum (1RM) (kg) testing in the squat and power clean. During the second session, peak force (N), relative peak force (N x kg(-1)), peak power (W), relative peak power (W x kg(-1)), peak velocity (m x s(-1)), and jump height (meters) in a CMJ, and peak force and rate of force development (RFD) (N x s(-1)) in a maximal isometric squat (ISO squat) and maximal isometric mid-thigh pull (ISO mid-thigh) were assessed. Significant correlations (P < or = 0.05) were found when comparing relative 1RMs (1RM/body mass), in both the squat and power clean, to relative CMJ peak power, CMJ peak velocity, and CMJ height. No significant correlations existed between the 4 measures of absolute strength, which did not account for body mass (squat 1RM, power clean 1RM, ISO squat peak force, and ISO mid-thigh peak force) when compared to CMJ peak velocity and CMJ height. In conclusion, multijoint dynamic tests of strength (squat 1RM and power clean 1RM), expressed relative to body mass, are most closely correlated with CMJ performance. These results suggest that increasing maximal strength relative to body mass can improve performance in explosive lower body movements. The squat and power clean, used in a concurrent strength and power training program, are recommended for optimizing lower body power.     

The relationship between core stability and performance in division I football players

The purpose of this study was to identify relationships between core stability and various strength and power variables in strength and power athletes. National Collegiate Athletic Association Division I football players (height 184.0 +/- 7.1 cm, weight 100.5 +/- 22.4 kg) completed strength and performance testing before off-season conditioning. Subjects were tested on three strength variables (one-repetition maximum [1RM] bench press, 1RM squat, and 1RM power clean), four performance variables (countermovement vertical jump [CMJ], 20- and 40-yd sprints, and a 10-yd shuttle run), and core stability (back extension, trunk flexion, and left and right bridge). Significant correlations were identified between total core strength and 20-yd sprint (r = -0.594), 40-yd sprint (r = -0.604), shuttle run (r = -0.551), CMJ (r = 0.591), power clean/body weight (BW) (r = 0.622), 1RM squat (r = -0.470), bench press/BW (r = 0.369), and combined 1RM/BW (r = 0.447); trunk flexion and 20-yd sprint (r = -0.485), 40-yd sprint (r = -0.479), shuttle run (r = -0.443), CMJ (r = 0.436), power clean/BW (r = 0.396), and 1RM squat (r = -0.416); back extension and CMJ (r = 0.536), and power clean/BW (r = 0.449); right bridge and 20-yd sprint r = -0.410) and 40-yd sprint (r = -0.435), CMJ (r = 0.403), power clean/BW (r = 0.519) and bench press/BW (r = 0.372) and combined 1RM/BW (r = 0.406); and left bridge and 20-yd sprint (r = -0.376) and 40-yd sprint (r = -0.397), shuttle run (r = -0.374), and power clean/BW (r = 0.460). The results of this study suggest that core stability is moderately related to strength and performance. Thus, increases in core strength are not going to contribute significantly to strength and power and should not be the focus of strength and conditioning.     

Relationships between stretch-shortening cycle performance and maximum muscle strength

This study aimed to examine the relationships between muscle power output using the stretch-shortening cycle (SSC) and maximum strength, as measured by the 1 RM (1 repetition maximum) test and the isokinetic dynamometer under elbow flexion. Sixteen trained, young adult males pulled a constant load of 40% MVC (maximum voluntary elbow flexion contraction) by ballistic elbow flexion under the following two preliminary conditions: 1) the static relaxed muscle state (SR condition) and 2) using the SSC (SSC condition). Muscle power was determined from the product of the pulling velocity and load mass by a power measurement instrument with a rotary encoder. The 1 RM bench press (1RM BP) and isokinetic maximum strength under elbow flexion with the Cybex-325 were measured as indicators of dynamic maximum strength. 1) The early power output exerted under the SSC condition showed a significant and high correlation with the 1 RM BP (r = 0.83), but only moderate correlation with the isokinetic muscle strength (r = 0.50-0.67). 2) The contribution of the 1 RM BP to the early muscle contraction velocity exerted under the SSC condition was large. These results suggested that muscle power exerted using the SSC shows a stronger relationship with maximum muscle strength measured by a 1 RM test rather than isokinetic maximum strength.     

An analysis of the ratio and relationship between upper body pressing and pulling strength

It has been posited that certain balances in strength should exist for opposing muscle groups (e.g., hamstrings and quadriceps) or actions (e.g., internal and external rotation of the shoulder) to improve sports performance or limit the likelihood of injury. Typically, expensive laboratory equipment such as isokinetic devices has been used to evaluate strength balances. The purpose of this study was to determine if two popular field tests of strength could be used to assess a concise strength balance in roughly opposing muscle actions for the shoulder girdle. The two opposing movement actions of pressing away from the shoulder girdle and pulling in towards the shoulder girdle were assessed via the 1 repetition maximum bench press (1RM BP) and 1 repetition maximum pull-up (1RM PU), respectively. Forty-two rugby league players, comprising 21 national league (NRL) and 21 state league (SRL) players, who regularly performed both exercises in their training, served as subjects in this investigation. The equivalence of the strength ratio (BP/PU x 100) and correlation between tests were also examined. The pooled data exhibited a strength ratio of 97.7% (9.0%) and correlation of r = 0.81 between the 1RM BP of 130.1 +/- 20.2 kg and 1RM PU of 133.1 +/- 17.1 kg. The small standard deviation exhibited tends to indicate that athletes should exhibit a concise ratio of around 100% if pressing and pulling strength have been addressed fairly equally in training. However, some athletes may have body types, preexisting injuries, or training histories that predispose them to either excelling or performing poorly during strength activities for either upper body pressing or pulling actions, with differences in strength of up to 15% existing in some individuals. These factors need to be taken into account when prescribing training based upon the strength ratio between pressing and pulling strength.     

Acute effects of different external compression with blood flow restriction on force-velocity profile during squat and bench press exercises

The aim was to compare the acute effects of bench press (BP) and squat (SQ) exercises with blood flow restriction (BFR) (40%, 60%, 80% and 100% of the complete arterial occlusion pressure (AOP)) and without BFR (CON) on the mean propulsive (Vel_MED) and maximum (Vel_MAX) bar velocity. Fourteen healthy, physically active males (age, 23.6 ± 4.1 years; height, 1.85 ± 0.11 m; body weight 85.4 ± 4.1 kg) took part in the study. There was one set for each testing condition (CON, 40%, 60%, 80% and 100%) with 6 repetitions for BP and 6 repetitions for SQ, at 60% of 1RM, and 3 minutes of recovery between sets. The results showed statistically significant differences of the sets with 80% BFR vs. CON (mean difference [MD] = 0.035 m · s^-1, p < 0.05, ES = 0.52 [1.02–0.03]) and 100% BFR sets vs. CON (MD = 0.074, p < 0.001, ES = 1.08 [1.79–0.38]) for BP. In the SQ exercise, statistically significant differences were found between 100% BFR vs. CON (DM = 0.031 m · s^-1, p < 0.05), vs. 100% BFR 40% (MD = 0.04 m · s^-1, p < 0.05). Trend analysis showed a statistically significant linear trend (F[1,9] = 34.9, p < 0.001, F[1,13] = 27.32, p < 0.001) for the Vel_MED in relation to the different levels of BFR. In conclusion, our results showed that BFR levels above ˜80% AOP (BP) and ˜100% AOP (SQ) produce a Vel_MED improvement at 60% 1RM.     

NFL-225 Test to Predict 1RM Bench Press in NCAA Division I Football Players

ABSTRACT: Mann, JB, Stoner, JD, and Mayhew, JL. NFL-225 test to predict 1RM bench press in NCAA Division I football players. J Strength Cond Res 26(10): 2623-2631, 2012-The National Football League (NFL)-225 test has gained popularity for assessing muscular performance among college football programs. Although the test is a measure of absolute muscular endurance, it was reputed to be highly correlated with maximum muscular strength. The purposes of this study were to assess the predictive potential of the NFL-225 test for estimating 1 repetition maximum (1RM) bench press performance in National Collegiate Athletic Association Division I college football players and to evaluate the accuracy of previous NFL-225 prediction equations. Players (n = 289) in a successful Division I program were assessed over a period of 5 years for 1RM bench press and repetitions completed with 102.3 kg (225 lb). Test sessions occurred within 1 week of each other during the off-season training period. In a validation group (n = 202), repetitions were significantly correlated with 1RM (r = 0.95), producing a prediction equation (1RM [kg] = 103.5 + 3.08 Reps) with a standard error of estimate = 6.4 kg (coefficient of variation = 4.3%). In a randomly selected cross-validation group (n = 87), the new equation nonsignificantly underpredicted by 0.9 ± 7.2 kg produced a high correlation with actual 1RM (intraclass correlation coefficient [ICC] = 0.967), had a limit of agreement of -15.0 to 13.2 kg, and predicted 69% of the group within ±4.5 kg of their actual 1RM. The best previous equation was that of Slovak et al., which was nonsignificantly underpredicted by -0.5 ± 6.7 kg, produced a high correlation with actual 1RM (ICC = 0.975), and predicted 68% of the group within ±4.5 kg of their actual 1RM. The new NFL-225 test seems to be a reasonable predictor of 1RM bench press in Division I players but should be further assessed on players from other high-level programs.     

Comparison of early phase adaptations for traditional strength and endurance, and low velocity resistance training programs in college-aged women

The purpose of this study was to investigate the effects of a six-week (16-17 training sessions) low velocity resistance training program (LV) on various performance measures as compared to a traditional strength (TS) and a traditional muscular endurance (TE) resistance training program. Thirty-four healthy adult females (21.1 +/- 2.7 y) were randomly divided into 4 groups: control (C), TS, TE, and LV. Workouts consisted of 3 exercises: leg press (LP), back squat (SQ), and knee extension (KE). Each subject was pre- and posttested for 1 repetition maximum (1RM), muscular endurance, maximal oxygen consumption (VO2max), muscular power, and body composition. After the pretesting, TS, TE, and LV groups attended a minimum of 16 out of 17 training sessions in which the LP, SQ, and KE were performed to fatigue for each of 3 sets. For each training session, TS trained at 6-10 RM and TE trained at 20-30 RM both with 1-2 second concentric/1-2 second eccentric; and LV trained at 6-10 RM, with 10 second concentric/4 s eccentric. Statistical significance was determined at an alpha level of 0.05. LV increased relative LP and KE 1 RM, but the percent increase was smaller than TS, and not different from C in the SQ. For muscular endurance, LV improved similarly to TE for LP and less than TS and TE for KE. Body composition improved for all groups including C (significant main effect). In conclusion, muscular strength improved with LV training however, TS showed a larger improvement. Muscular endurance improved with LV training, but not above what TE or TS demonstrated. For all other variables, there were no significant improvements for LV beyond what C demonstrated.     

The effects of creatine monohydrate loading on anaerobic performance and one-repetition maximum strength

The purpose of this study was to examine the effects of 7 days of supplementation with 20 g·d?1 of creatine monohydrate (CM) on mean power (MP) and peak power (PP) from the Wingate anaerobic test (WAnT), body weight (BW), 1-repetition maximum (1RM) bilateral leg extension (LE) strength, and 1RM bench press (BP) strength. This study used a randomized, double-blind, placebo-controlled design. Twenty-two men (mean ± SD: age = 22.1 ± 2.0 years; height = 178.0 ± 5.8 cm; body weight [BW] = 77.6 ± 7.6 kg) were randomly assigned to either a supplement (SUPP; n = 10) or placebo (PLAC; n = 12) group. The SUPP group ingested 20 g·d?1 of CM powder for 7 days, whereas the PLAC ingested 20 g·d?1 of maltodextrin powder. Measurements for the PLAC and SUPP groups included BW, PP, and MP from two 30-second WAnTs (separated by 7 minutes), and 1RM strength for LE and BP. Testing was conducted before (PRE) and after (POST) 7 days of ingesting either the supplement or placebo. The results of this study indicated that there was a significant (p ≤ 0.05) increase from PRE to POST testing in MP for the SUPP group (5.4%) but not for the PLAC group (-0.3%). There were no between-group differences, however, for 1RM LE and 1RM BP strength. Furthermore, there were no changes in PP or BW for either group. The findings of this study indicated that loading with 20 g·d?1 of CM for 7 days increased MP (5.4% increase) from the WAnT, but it had no effect on strength (1RM LE and 1RM BP), PP, or BW.     

Six months of supervised high-intensity low-volume resistance training improves strength independent of changes in muscle mass in young overweight men

To determine the effects of a 6-month supervised low-volume resistance training (RT) program (1 set, 85-90%, one repetition maximum, 1RM, 3 d x wk(-1)) on muscular strength (1RM) and skeletal muscle mass (SMM) in previously sedentary, overweight men on an ad libitum diet. Nineteen men were randomly assigned to a control (CON, n = 8) or RT (n = 11) group. The exercise protocol consisted of 5 upper- and 4 lower-body exercises using weight machines. CON maintained their sedentary lifestyle. One RM for upper body (chest press [CP] + lat pull-down [LPD]) and lower body (leg press [LP]) and SMM were assessed at baseline, and at 3 and 6 months. Adherence was 96 +/- 2% with an average time to complete each exercise session of 15 +/- 2 minutes. Volume completed per exercise session significantly increased from baseline (2,812 +/- 670 kg) to 6 months (6,411 +/- 2,128 kg). There was a group by time interaction in 1RM for CP, LPD, and LP. Upper-body strength increased significantly (p < 0.001) (31.3 +/- 9.3%) from baseline to 3 months and from 3 to 6 months (17.9 +/- 8.7%). Lower-body strength also increased significantly from baseline to 3 months (17.8 +/- 16.6%) and from 3 to 6 months (32.0 +/- 33.7%). No changes in upper- or lower-body strength occurred in the CON group. There was no group by time interaction for SMM (CON, 34.5 +/- 2.9 kg vs. RT, 34.2 +/- 2.9 kg; p > 0.05) or for energy intake (p > 0.05). In conclusion, a single set resistance training program at 85% of 1RM, 3 d x wk(-1) resulted in continued increases in muscular strength and a very high adherence rate over a 6-month period in sedentary, overweight men independent of significant changes in SMM. This training protocol may increase adherence and produce long-term increases in muscular fitness as part of an adult fitness program.