High level expression and characterization of a novel thermostable, organic solvent tolerant, 1,3-regioselective lipase from Geobacillus sp. strain ARM

The mature ARM lipase gene was cloned into the pTrcHis expression vector and over-expressed in Escherichia coli TOP10 host. The optimum lipase expression was obtained after 18 h post induction incubation with 1.0 mM IPTG, where the lipase activity was approximately 1623-fold higher than wild type. A rapid, high efficient, one-step purification of the His-tagged recombinant lipase was achieved using immobilized metal affinity chromatography with 63.2% recovery and purification factor of 14.6. The purified lipase was characterized as a high active (7092 U mg⁻¹), serine-hydrolase, thermostable, organic solvent tolerant, 1,3-specific lipase with a molecular weight of about 44 kDa. The enzyme was a monomer with disulfide bond(s) in its structure, but was not a metalloenzyme. ARM lipase was active in a broad range of temperature and pH with optimum lipolytic activity at pH 8.0 and 65 °C. The enzyme retained 50% residual activity at pH 6.0-7.0, 50 °C for more than 150 min.     

Purification and characterisation of a bifunctional alginate lyase from novel Isoptericola halotolerans CGMCC 5336

A novel halophilic alginate-degrading microorganism was isolated from rotten seaweed and identified as Isoptericola halotolerans CGMCC5336. The lyase from the strain was purified to homogeneity by combining of ammonium sulfate fractionation and anion-exchange chromatography with a specific activity of 8409.19 U/ml and a recovery of 25.07%. This enzyme was a monomer with a molecular mass of approximately 28 kDa. The optimal temperature and pH were 50 °C and pH 7.0, respectively. The lyase maintained stability at neutral pH (7.0–8.0) and temperatures below 50 °C. Metal ions including Na⁺, Mg²⁺, Mn²⁺, and Ca²⁺ notably increased the activity of the enzyme. With sodium alginate as the substrate, the K_m and V_max were 0.26 mg/ml and 1.31 mg/ml min, respectively. The alginate lyase had substrate specificity for polyguluronate and polymannuronate units in alginate molecules, indicating its bifunctionality. These excellent characteristics demonstrated the potential applications in alginate oligosaccharides production with low polymerisation degrees.     

Characterization of an extracellular lipase from the biocontrol fungus, Nomuraea rileyi MJ, and its toxicity toward Spodoptera litura

An extracellular lipase from Nomuraea rileyi MJ was purified 23.9-fold with 1.69% yield by ammonium sulfate precipitation followed by Sephacryl S-100 HR column chromatography. By mass spectrometry and SDS-polyacrylamide gel electrophoresis, the molecular weight of the homogenous lipase was 81 kDa. The N-terminal sequence was determined as LeuSerValGluGlnThrLysLeuSerLysLeuAlaTyrAsnAsp and it showed no homology to sequences of known lipases. The optimum pH and temperature for activity were 8.0 and 35 °C, respectively. The enzyme was stable in the pH range 7.0-9.0 and at 15-35 °C for 1 h. Higher activity was observed in the presence of surfactants, Na⁺, NH₄⁺ ions, NaN₃ and ethylenediaminetetraacetic acid (EDTA), while Co²⁺ and Cu²⁺ ions, cysteine and dithiothreitol (DTT) strongly inhibited activity. The purified lipase hydrolyzed both synthetic and natural triglycerides with maximum activity for trilaurin and coconut oil, respectively. It also hydrolyzed esters of p-nitrophenol (pNP) with highest activity for p-nitrophenyl caprate (pNPCA). The purified lipase was found to promote N. rileyi spore germination in vitro in that germination reached 98% in conidial suspensions containing purified lipase at 2.75 U. Moreover, it enhanced toxicity of N. rileyi toward Spodoptera litura larvae with mortality via topical application reaching 63.3% at 4-10 days post-treatment which calculated to be 2.7 times higher than the mortality obtained using conidial suspensions alone.     

Extracellular expression and biochemical characterization of α-cyclodextrin glycosyltransferase from Paenibacillus macerans

The cgt gene encoding α-cyclodextrin glycosyltransferase (α-CGTase) from Paenibacillus macerans strain JFB05-01 was expressed in Escherichia coli as a C-terminal His-tagged protein. After 90 h of induction, the activity of α-CGTase in the culture medium reached 22.5 U/mL, which was approximately 42-fold higher than that from the parent strain. The recombinant α-CGTase was purified to homogeneity through either nickel affinity chromatography or a combination of ion-exchange and hydrophobic interaction chromatography. Then, the purified enzyme was characterized in detail with respect to its cyclization activity. It is a monomer in solution. Its optimum reaction temperature is 45 °C, and half-lives are approximately 8 h at 40 °C, 1.25 h at 45 °C and 0.5 h at 50 °C. The recombinant α-CGTase has an optimum pH of 5.5 with broad pH stability between pH 6 and 9.5. It is activated by Ca²⁺, Ba²⁺, and Zn²⁺ in a concentration-dependent manner, while it is dramatically inhibited by Hg²⁺. The kinetics of the α-CGTase-catalyzed cyclization reaction could be fairly well described by the Hill equation.     

Biosynthesis of homoeriodictyol from eriodictyol by flavone 3′-O-methyltransferase from recombinant Yarrowia lioplytica: Heterologous expression,biochemical characterization,and optimal transformation

In this work, we attempted to synthesize homoeriodictyol by transferring one methyl group of S-adenosyl-l-methionine (SAM) to eriodictyol using flavone 3′-O-methyltransferase ROMT-9, which was produced by recombinant Yarrowia lipolytica. Specifically, the ROMT-9 gene from rice was synthesized and cloned into the multi-copy integrative vector pINA1297, and was further expressed in Y. lipolytica with a growth phase-dependent constitutive promoter hp4d. The highest ROMT-9 activity reached 5.53 U/L after 4 days of culture in shake flask. The optimal pH and temperature of the purified ROMT-9 were 8.0 and 37 °C, respectively. The purified enzyme was stable up to 40 °C, and retained more than 80% of its maximal activity between pH 6.5 and 9.0. The recombinant ROMT-9 did not require Mg²⁺ for catalysis, while was completely inhibited in the presence of 5 mM Zn²⁺, Cu²⁺, Ba²⁺, Al³⁺, or Ni²⁺. The purified ROMT-9 was used to synthesize homoeriodictyol, and the maximal transformation ratio reached 52.4% at 16 h under the following conditions: eriodictyol 0.2 g/L, ROMT-9 0.16 g/L, SAM 0.2 g/L, CH₃OH 6% (v/v), temperature 37 °C, and pH 8.0. This work provides an alternative strategy for efficient synthesis of homoeriodictyol and compared to the traditional plant extraction or chemical synthesis, the biotransformation approach generates less environmental pollution and has a great potential for the sustainable production of homoeriodictyol.     

Production of an acidic and thermostable lipase of the mesophilic fungus Penicillium simplicissimum by solid-state fermentation

The production of a lipase by a wild-type Brazilian strain of Penicillium simplicissimum in solid-state fermentation of babassu cake, an abundant residue of the oil industry, was studied. The enzyme production reached about 90 U/g in 72 h, with a specific activity of 4.5 U/mg of total proteins. The crude lipase showed high activities at 35–60 °C and pH 4.0–6.0, with a maximum activity at 50 °C and pH 4.0–5.0. Enzyme stability was enhanced at pH 5.0 and 6.0, with a maximum half-life of 5.02 h at 50 °C and pH 5.0. Thus, this lipase shows a thermophilic and thermostable behavior, what is not common among lipases from mesophilic filamentous fungi. The crude enzyme catalysed the hydrolysis of triglycerides and p-nitrophenyl esters (C4:0–C18:0), preferably acting on substrates with medium-chain fatty acids. This non-purified lipase in addition to interesting properties showed a reduced production cost making feasible its applicability in many fields.     

Inositol-1 (or 4)-monophosphatase from Glycine max embryo axes is a phosphatase with broad substrate specificity that includes phytate dephosphorylation

A phosphate-hydrolyzing activity from Glycine max embryo axes was purified by a series of chromatographic steps and electroelution from activity gels, and demonstrated to be an inositol-1 (or 4)-monophosphatase by partial internal amino acid sequence. This enzyme hydrolyzed ATP, sodium pyrophosphate (NaPPi), inositol hexakisphosphate, and inositol 1-monophosphate, but not p-nitrophenyl phosphate, ADP, AMP or glucose 6-P. Using NaPPi as substrate, the highly purified protein hydrolyzed up to 0.4 mmol phosphate min^− 1 mg^− 1 protein and had a Km_avg of 235 μM for NaPPi. Since NaPPi is relatively inexpensive and readily available, we used this as substrate for the subsequent characterization. We observed the following: (a) specific inhibition by Li and NaF but not by butanedione monoxime, or orthovanadate; (b) activation by Cu²⁺ and Mg²⁺; (c) optimum activity at pH 7.4; and (d) temperature stability after 1-h incubations at 37–80 °C, with maximum activity at 37 °C. The partially purified protein was detected by in-gel activity assays and the band was electroeluted to yield a highly purified protein. Analysis by SDS-PAGE and native IEF-PAGE yielded a single major polypeptide of 29 kDa and pI ∼ 5.9, respectively. In addition, in-gel activity from embryo axes and whole hypocotyls at early germination times revealed one high and one intermediate molecular weight isoform, but only the intermediate one corresponded to IMPase. Throughout the post-imbibition period, the activity of the high molecular weight isoform disappeared and IMPase increased, indicating an increasing expression of the enzyme as germination and growth proceeded. These data indicate that the inositol-1 (or 4)-monophosphatase present in the embryo axis of G. max has a wide phosphate substrate specificity, and may play an important role in phosphate metabolism during the germination process.     

A cryoprotective and cold-adapted 1,3-β-endoglucanase from cherimoya (Annona cherimola) fruit

A 1,3-β-glucanase with potent cryoprotective activity was purified to homogeneity from the mesocarp of CO₂-treated cherimoya fruit (Annona cherimola Mill.) stored at low temperature using anion exchange and chromatofocusing chromatography. This protein was characterized as a glycosylated endo-1,3-β-glucanase with a M_r of 22.07 kDa and a pI of 5.25. The hydrolase was active and stable in a broad acidic pH range and it exhibited maximum activity at pH 5.0. It had a low optimum temperature of 35 °C and it retained 40% maximum activity at 5 °C. The purified 1,3-β-glucanase was relatively heat unstable and its activity declined progressively at temperatures above 50 °C. Kinetic studies revealed low k_cat (3.10 ± 0.04 s⁻¹) and K_m (0.32 ± 0.03 mg ml⁻¹) values, reflecting the intermediate efficiency of the protein in hydrolyzing laminarin. Moreover, a thermodynamic characterization revealed that the purified enzyme displayed a high k_cat at both 37 and 5 °C, and a low E_a (6.99 kJ mol⁻¹) within this range of temperatures. In vitro functional studies indicated that the purified 1,3-β-glucanase had no inhibitory effects on Botrytis cinerea hyphal growth and no antifreeze activity, as determined by thermal hysteresis analysis using differential scanning calorimetry. However, a strong cryoprotective activity was observed against freeze-thaw inactivation of lactate dehydrogenase. Indeed, the PD₅₀ was 8.7 μg ml⁻¹ (394 nM), 9.2-fold higher (3.1 on a molar basis) than that of the cryoprotective protein BSA. Together with the observed accumulation of glycine-betaine in CO₂-treated cherimoya tissues, these results suggest that 1,3-β-glucanase could be functionally implicated in low temperature-defense mechanism activated by CO₂.     

High production of cold-tolerant chitinases on shrimp wastes in bench-top bioreactor by the Antarctic fungus Lecanicillium muscarium CCFEE 5003: Bioprocess optimization and characterization of two main enzymes

The Antarctic fungus Lecanicillium muscarium CCFEE-5003 was preliminary cultivated in shaken flasks to check its chitinase production on rough shrimp and crab wastes. Production on shrimp shells was much higher than that on crab shells (104.6 ± 9.3 and 48.6 ± 3.1 U/L, respectively). For possible industrial applications, bioprocess optimization was studied on shrimp shells in bioreactor using RSM to state best conditions of pH and substrate concentration. Optimization improved the production by 137% (243.6 ± 17.3). Two chitinolytic enzymes (CHI1 and CHI2) were purified and characterized. CHI1 (MW ca. 61 kDa) showed optima at pH 5.5 and 45 °C while CHI2 (MW ca. 25 kDa) optima were at pH 4.5 and 40 °C. Both enzymes maintained high activity levels at 5 °C and were inhibited by Fe⁺⁺, Hg⁺⁺ and Cu⁺⁺. CHI2 was strongly allosamidin-sensitive. Both proteins were N-acetyl-hexosaminidases (E.C. 3.2.1.52) but showed different roles in chitin hydrolysis: CHI1 could be defined as “chitobiase” while CHI2 revealed a main “eso-chitinase” activity.     

Characterization of Saccharomyces cerevisiae Atm1p. Functional studies of an ABC7 type transporter

Saccharomyces cerevisiae Atm1p has been cloned, over-expressed and purified from a yeast expression system. The sequence includes both the soluble ATPase and transmembrane-spanning domains. With the introduction of an N-terminal Kozak sequence and a C-terminal (His)₆-tag, a yield of 1 mg of Atm1p was obtained from 3 g wet yeast cells, which is comparable to other membrane-associated proteins isolated from eukaryotic expression systems. The ATPase activity of Atm1p is sensitive to sodium vanadate, a P-type ATPase inhibitor, with an IC₅₀ of 4 μM. MgADP is a product inhibitor for Atm1p with an IC₅₀ of 0.9 mM. The Michaelis–Menten constants V_max, K_M and k_cat of Atm1p were measured as 8.7 ± 0.3 μM/min, 107 ± 16 μM and 1.24 ± 0.06 min^− 1, respectively. A plot of ATPase activity versus concentration of Atm1p exhibits a nonlinear relationship, suggesting an allosteric response and an important role for the transmembrane domain in mediating both ATP hydrolysis and MgADP release. The metal dependence of Atm1p ATPase activity demonstrated a reactivity order of Mg²⁺ > Mn²⁺ > Co²⁺, while each divalent ion was found to be inhibitory at higher concentrations. The activation and inhibitory effect of phospholipids suggest that formation of a lipid–micelle complex is important for enzymatic activity and stability. Structural analysis of Atm1p by CD spectroscopy suggested a similarity of secondary structure to that found for other members of this ABC protein family.     

Production,partial purification and characterization of organic solvent tolerant lipase from Burkholderia multivorans V2 and its application for ester synthesis

Burkholderia multivorans V2 (BMV2) isolated from soil was found to produce an extracellular solvent tolerant lipase (6.477 U/mL). This lipase exhibited maximum stability in n-hexane retaining about 97.8% activity for 24 h. After performing statistical optimization of medium components for lipase production, a 2.2-fold (14 U/mL) enhancement in the lipase production was observed. The crude lipase from BMV2 was partially purified by ultrafiltration and gel permeation chromatography with 24.64-fold purification. The K_m and V_max values for partially purified BMV2 lipase were found to be 1.56 mM and 5.62 μmoles/mg min. The metal ions Ca²⁺, Mg²⁺ and Mn²⁺ had stimulatory effect on lipase activity, whereas Cu²⁺, Fe²⁺ and Zn²⁺ strongly inhibited the lipase activity. EDTA and PMSF at 10 mM concentration strongly inhibited the lipase activity. Non-ionic and anionic surfactants stimulated the lipase activity. BMV2 lipase was proved to be efficient in synthesis of ethyl butyrate ester under non-aqueous environment.     

Characterization and application of a detergent-stable alkaline α-amylase from Bacillus subtilis strain AS-S01a

A strain AS-S01a, capable of producing high-titer alkaline α-amylase, was isolated from a soil sample of Assam, India and was taxonomically identified as Bacillus subtilis strain AS-S01a. Optimized α-amylase yield by response surface method (RSM) was obtained as 799.0 U with a specific activity of 201.0 U/mg in a process control bioreactor. A 21.0 kDa alkaline α-amylase purified from this strain showed optimum activity at 55 °C and pH 9.0, and it produced high molecular weight oligosaccharides including small amount of glucose from starch as the end product. The K_m and V_max values for this enzyme towards starch were determined as 1.9 mg/ml and 198.21 μmol/min/mg, respectively. The purified α-amylase retained its activity in presence of oxidant, surfactants, EDTA and various commercial laundry detergents, thus advocating its suitability for various industrial applications.     

Purification and characterization of a thiol amylase over produced by a non-cereal non-leguminous plant, Tinospora cordifolia

A 43 kDa α-amylase was purified from Tinospora cordifolia by glycogen precipitation, ammonium sulfate precipitation, gel filtration chromatography, and HPGPLC. The enzyme was optimally active in pH 6.0 at 60 °C and had specific activity of 546.2 U/mg of protein. Activity was stable in the pH range of 4-7 and at temperatures up to 60 °C. PCMB, iodoacetic acid, iodoacetamide, DTNB, and heavy metal ions Hg²⁺ > Ag⁺ > Cd²⁺ inhibited enzyme activity while Ca²⁺ improved both activity and thermostability. The enzyme was a thiol amylase (3 SH group/mole) and DTNB inhibition of activity was released by cysteine. N-terminal sequence of the enzyme had poor similarity (12-24%) with those of plant and microbial amylases. The enzyme was equally active on soluble starch and amylopectin and released maltose as the major end product.     

High level expression of a novel β-mannanase from Chaetomium sp. exhibiting efficient mannan hydrolysis

A novel β-mannanase gene (CsMan5A) was cloned from Chaetomium sp. CQ31 and expressed in Pichia pastoris. It had an open reading frame of 1251 bp encoding 416 amino acids and contained two introns. The deduced amino acid sequence shared the highest similarity (73%) with the β-mannanase from Emericella nidulans and belongs to glycosyl hydrolase family 5. The recombinant β-mannanase (CsMan5A) was secreted at extremely high levels of 50,030 U mL⁻¹ and 6.1 mg mL⁻¹ in high cell density fermentor. The purified enzyme was optimally active at pH 5.0 and 65 °C and displayed broad pH stability (pH 5.0-11.0) and exhibited specificity towards locust bean gum (K_m = 3.1 mg mL⁻¹), guar gum (K_m = 9.3 mg mL⁻¹) and konjac powder (K_m = 10.5 mg mL⁻¹). It efficiently degraded mannan polysaccharides into mannose and mannooligosacccharides, and also hydrolyzed mannotriose and mannotetraose. These properties make CsMan5A highly useful in food, feed and paper/pulp industries.     

Production,purification and biochemical characterisation of a novel lipase from a newly identified lipolytic bacterium Staphylococcus caprae NCU S6

A novel lipase, SCNL, was isolated from Staphylococcus caprae NCU S6 strain in the study. The lipase was purified to homogeneity with a yield of 6.13% and specific activity of 502.76 U/mg, and its molecular weight was determined to be approximately 87 kDa. SCNL maintained above 80% of its initial activity at a wide range of temperatures (20–50 °C) and pH values (6–11), with an optimal temperature at 40 °C and optimal pH at 9.0 with p-nitrophenyl palmitate as a substrate. SCNL exhibited a higher residual activity than the other staphylococcal lipases in the presence of common enzyme inhibitors and commercial detergents. The lipase activity was enhanced by organic solvents (isooctane, glycerol, DMSO and methanol) and metal ions (Na⁺, Ba²⁺, Ca²⁺, and Mn²⁺). The Km and Vmax values of SCNL were 0.695 mM and 262.66 s⁻¹mM⁻¹, respectively. The enzyme showed a preference for p-NP stearate, tributyrin and canola oil. These biochemical features of SCNL suggested that it may be an excellent novel lipase candidate for industrial and biotechnological applications.     

Secretory expression and characterization of a highly Ca-activated thermostable L2 lipase

Thermostable lipases are important biocatalysts, showing many interesting properties with industrial applications. Previously, a thermophilic Bacillus sp. strain L2 that produces a thermostable lipase was isolated. In this study, the gene encoding for mature thermostable L2 lipase was cloned into a Pichia pastoris expression vector. Under the control of the methanol-inducible alcohol oxidase (AOX) promoter, the recombinant L2 lipase was secreted into the culture medium driven by the Saccharomyces cerevisiae α-factor signal sequence. After optimization the maximum recombinant lipase activity achieved in shake flasks was 125 U/ml. The recombinant 44.5 kDa L2 lipase was purified 1.8-fold using affinity chromatography with 63.2% yield and a specific activity of 458.1 U/mg. Its activity was maximal at 70 °C and pH 8.0. Lipase activity increased 5-fold in the presence of Ca²⁺. L2 lipase showed a preference for medium to long chain triacylglycerols (C₁₀–C₁₆), corn oil, olive oil, soybean oil, and palm oil. Stabilization at high temperature and alkaline pH as well as its broad substrate specificity offer great potential for application in various industries that require high temperature operations.     

X-ray structure of a galactose-specific lectin from Spatholobous parviflorous

A galactose-specific seed lectin from Spatholobous parviflorus (SPL) has been purified, crystallized and its X-ray structure solved. It is the first lectin purified and crystallized from the genus Spatholobus (family: Fabaceae). The crystals belong to the space group P1, with a = 60.792 Å, b = 60.998 Å, c = 78.179 Å, α = 78.68°, β = 88.62°, γ = 104.32°. The data were collected at 2.04 Å resolution under cryocondition, on a MAR image-plate detector system, mounted on a rotating anode X-ray generator. The coordinates of Dolichos biflorus lectin (1lu1) were successfully used for the structure solution by molecular replacement method. The primary structure of the SPL was not known earlier and it was unambiguously visible in the electron density. S. parviflorus lectin is a hetero-dimeric-tetramer with two alpha and two beta chains of 251 and 239 residues respectively. SPL has two metal ions, Ca²⁺ and Mn²⁺, bound to a loop region of each chain. The SPL monomers are in jelly roll form.     

Isolation and characterization of an antifungal protein from Bacillus licheniformis HS10

Bacillus licheniformis HS10 is a good biocontrol agent against Pseudoperonospora cubensis which caused cucumber downy disease. To identify and characterize the antifungal proteins produced by B.licheniformis HS10, the proteins from HS10 were isolated by using 30–60% ammonium sulfate precipitation, and purified with column chromatography on DEAE Sepharose Fast Flow, RESOURCE Q and Sephadex G-75. And the SDS–PAGE and MALDI-TOF/TOF-MS analysis results demonstrated that the antifungal protein was a monomer with molecular weight of about 55 kDa, identified as carboxypeptidase. Our experiments also showed that the antifungal protein from B. licheniformis HS10 had significantly inhibition on eight different kinds of plant pathogenic fungi, and it was stable with good biological activity at as high as 100 °C for 30 min and in pH value ranged from 6 to 10. The biological activity was negatively affected by protease K and 10 mM metal cations except Ca²⁺.     

Extracellular cold-active lipase of Microbacterium luteolum isolated from Gangotri glacier,western Himalaya: Isolation,partial purification and characterization

A psychrophilic bacterium producing cold-active lipase upon growth at low temperature was isolated from the soil samples of Gangotri glacier and identified as Microbacterium luteolum. The bacterial strain produced maximum lipase at 15 °C, at a pH of 8.0. Beef extract served as the best organic nitrogen source and ammonium nitrate as inorganic for maximum lipase production. Castor oil served as an inducer and glucose served as an additional carbon source for production of cold-active lipase. Ferric chloride as additional mineral salt in the medium, highly influenced the lipase production with an activity of 8.01 U ml^?1. The cold-active lipase was purified to 35.64-fold by DEAE-cellulose column chromatography. It showed maximum activity at 5 °C and thermostability up to 35 °C. The purified lipase was stable between pH 5 and 9 and the optimal pH for enzymatic hydrolysis was 8.0. Lipase activity was stimulated in presence of all the solvents (5%) tested except with acetonitrile. Lipase activity was inhibited in presence of Mn²⁺, Cu²⁺, and Hg²⁺; whereas Fe⁺, Na⁺ did not have any inhibitory effect on the enzyme activity. The purified lipase was stable in the presence of SDS; however, EDTA and dithiothreitol inhibited enzyme activity. Presence of Ca²⁺ along with inhibitors stabilized lipase activity. The cold active lipase thus exhibiting activity and stability at a low temperature and alkaline pH appears to be practically useful in industrial applications especially in detergent formulations.     

Fasciola gigantica: purification and characterization of adenosine deaminase

Nucleotidase cascades (apyrase, 5′ nucleotidase, and adenosine deaminase (ADA) were investigated in the parasitic trematode Fasciola gigantica. ADA had the highest activity in the nucleotidase cascades. Adenosine deaminase was purified from F. gigantica through acetone precipitation and chromatography on CM-cellulose. Two forms of enzyme (ADAI, ADAII) were separated. ADAII was purified to homogeneity after chromatography on Sephacryl S-200. The molecular mass was 29 KDa for the native and denatured enzyme using gel filtration and SDS-PAGE, respectively. The enzyme (ADAII) had a pH optimum at 7.5 and a K_m 1.0 mM adenosine, a temperature optimum at 40 °C and heat stability up to 40 °C. The order of effectiveness of metals as inhibitors was found to be Hg²⁺ > Mn²⁺ > Cu²⁺ > Ca²⁺ > Zn²⁺ > Ni²⁺ > Ba²⁺.