Missense Mutations in LRP5 Associated with High Bone Mass Protect the Mouse Skeleton from Disuse- and Ovariectomy-Induced Osteopenia

The low density lipoprotein receptor-related protein-5 (LRP5), a co-receptor in the Wnt signaling pathway, modulates bone mass in humans and in mice. Lrp5 knock-out mice have severely impaired responsiveness to mechanical stimulation whereas Lrp5 gain-of-function knock-in and transgenic mice have enhanced responsiveness to mechanical stimulation. Those observations highlight the importance of Lrp5 protein in bone cell mechanotransduction. It is unclear if and how high bone mass-causing (HBM) point mutations in Lrp5 alter the bone-wasting effects of mechanical disuse. To address this issue we explored the skeletal effects of mechanical disuse using two models, tail suspension and Botulinum toxin-induced muscle paralysis, in two different Lrp5 HBM knock-in mouse models. A separate experiment employing estrogen withdrawal-induced bone loss by ovariectomy was also conducted as a control. Both disuse stimuli induced significant bone loss in WT mice, but Lrp5 A214V and G171V were partially or fully protected from the bone loss that normally results from disuse. Trabecular bone parameters among HBM mice were significantly affected by disuse in both models, but these data are consistent with DEXA data showing a failure to continue growing in HBM mice, rather than a loss of pre-existing bone. Ovariectomy in Lrp5 HBM mice resulted in similar protection from catabolism as was observed for the disuse experiments. In conclusion, the Lrp5 HBM alleles offer significant protection from the resorptive effects of disuse and from estrogen withdrawal, and consequently, present a potential mechanism to mimic with pharmaceutical intervention to protect against various bone-wasting stimuli.     

Gender specific LRP5 influences on trabecular bone structure and strength

A mutation in LRP5 (low-density lipoprotein receptor-related protein 5) has been shown to increase bone mass and density in humans and animals. Transgenic mice expressing the LRP5 mutation (G171V) demonstrate an increase in bone mass as compared to non-transgenic (NTG) littermates. This study evaluated LRP5 gene and gender-related influences on the structural and biomechanical strength properties of trabecular and cortical bone in femurs and vertebrae (L5) of 17-week-old mice. Micro-computed tomography was used to evaluate the trabecular bone structure of distal femurs and vertebrae ex vivo. Mechanical testing of the trabecular bone in the distal femur was done to determine biomechanical strength. Differences due to genotype and gender were tested using two-way ANOVA at a significance level of p<0.05. Trabecular bone structural parameters (BV/TV, trabecular thickness, number, etc.) at the distal femur, femoral neck, and vertebral body sites were greater in the transgenic as compared to the NTG mice. In addition, vertebral cortical thickness and trabecular strength parameters (ultimate and yield loads, stiffness, ultimate and yield stresses) in the distal femur were greater in the transgenic mice as compared to NTG. The increasing trends of cortical thickness were also noted in the transgenic mice as compared to NTG. Within LRP5 (G171V) mutant mice, there were significant gender-related differences in some of the trabecular bone structural parameters at all the sites (distal femur, femoral neck, and vertebral body). However, unlike trabecular structural parameters, the gender-specific differences were not found in the trabecular strength of LRP5 transgenic mice. In summary, these findings suggest that the LRP5 (G171V) mutation results in greater trabecular bone structure and strength at both the distal femurs and vertebral bodies as compared to NTG. In addition, only the trabecular structure parameters were affected by gender within the LRP5 (G171V) mutation.     

Comparison of trabecular bone behavior in core and whole bone samples using high-resolution modeling of a vertebral body

Computational analysis of trabecular bone normally involves the modeling of (experimental tests of) cored samples. However, the lack of constraint on the sides of the extracted trabecular bone samples limits the information that can be inferred regarding true in situ behavior. Here, the element-by-element voxel-based finite element method was applied via, a custom-written software suite (FEEBE), to a 72 μm resolution model of an ovine vertebra. The difference between the apparent modulus of eight concentric core cylinders when modeled as part of the whole bone (containing 84 × 10⁶ degrees of freedom) and independent of the whole bone was investigated. The results showed that cored trabecular bone apparent modulus depended significantly on the core diameter when modeled as an extracted core (r ² = 0.975) and as part of a whole bone (r ² = 0.986). The cause of this result was separated into the side-artifact effect and bone volume fraction (BV/TV) effect. For the independently modeled cores, the apparent modulus of an inner core region of interest varied with increasing thickness of the outer annulus. This was attributed to the side-artifact effect, given that the BV/TV of the core region was constant. Within the whole trabecular structure, the side artifact was eliminated as the entire bone structure was modeled. However, a BV/TV effect influenced the apparent modulus depending on the size of the core selected for determining apparent modulus. Changing the size of the core varied the overall BV/TV of the core, and this significantly (r ² = 0.999) influences the apparent modulus. Therefore, determining a ‘true’ apparent modulus for trabecular bone was not achievable. The independently modeled cores consistently under-predict the in vivo apparent modulus. It is recommended that if a ‘true’ apparent modulus is required, the BV/TV at which it is required needs to be first determined. Apparent modeling of entire bones at microscale resolution allowed regions of low and high tissue strains to be identified, consistent with patterns of trabecular bone remodeling and resorption reported in literature. The basivertebral vein cavity underwent the highest strains within the entire vertebral body, suggesting that failure might initiate here, despite containing visibly thicker struts and plate trabeculae. Although computationally expensive, analysis of the entire vertebral body provided a full picture of in situ trabecular bone deformation.     

Lrp5 is not required for the proliferative response of osteoblasts to strain but regulates proliferation and apoptosis in a cell autonomous manner

Although Lrp5 is known to be an important contributor to the mechanisms regulating bone mass, its precise role remains unclear. The aim of this study was to establish whether mutations in Lrp5 are associated with differences in the growth and/or apoptosis of osteoblast-like cells and their proliferative response to mechanical strain in vitro. Primary osteoblast-like cells were derived from cortical bone of adult mice lacking functional Lrp5 (Lrp5(-/-)), those heterozygous for the human G171V High Bone Mass (HBM) mutation (LRP5(G171V)) and their WT littermates (WT(Lrp5), WT(HBM)). Osteoblast proliferation over time was significantly higher in cultures of cells from LRP5(G171V) mice compared to their WT(HBM) littermates, and lower in Lrp5(-/-) cells. Cells from female LRP5(G171V) mice grew more rapidly than those from males, whereas cells from female Lrp5(-/-) mice grew more slowly than those from males. Apoptosis induced by serum withdrawal was significantly higher in cultures from Lrp5(-/-) mice than in those from WT(HBM) or LRP5(G171V) mice. Exposure to a single short period of dynamic mechanical strain was associated with a significant increase in cell number but this response was unaffected by genotype which also did not change the 'threshold' at which cells responded to strain. In conclusion, the data presented here suggest that Lrp5 loss and gain of function mutations result in cell-autonomous alterations in osteoblast proliferation and apoptosis but do not alter the proliferative response of osteoblasts to mechanical strain in vitro.     

Linear viscoelasticity - bone volume fraction relationships of bovine trabecular bone

Trabecular bone has been previously recognized as time-dependent (viscoelastic) material, but the relationships of its viscoelastic behaviour with bone volume fraction (BV/TV) have not been investigated so far. Therefore, the aim of the present study was to quantify the time-dependent viscoelastic behaviour of trabecular bone and relate it to BV/TV. Uniaxial compressive creep experiments were performed on cylindrical bovine trabecular bone samples (\(\textit{n}\,{=}\,13\)) at loads corresponding to physiological strain level of 2000 \({\upmu }{\upvarepsilon }\). We assumed that the bone behaves in a linear viscoelastic manner at this low strain level and the corresponding linear viscoelastic parameters were estimated by fitting a generalized Kelvin–Voigt rheological model to the experimental creep strain response. Strong and significant power law relationships (\(r^2\,{=}\,0.73,\ p\,{<}\,0.001\)) were found between time-dependent creep compliance function and BV/TV of the bone. These BV/TV-based material properties can be used in finite element models involving trabecular bone to predict time-dependent response. For users’ convenience, the creep compliance functions were also converted to relaxation functions by using numerical interconversion methods and similar power law relationships were reported between time-dependent relaxation modulus function and BV/TV.     

Volume to density relation in adult human bone tissue

Uniformity of tissue mineralisation is a strongly debated issue, due to its relation with bone mechanical behaviour. Bone mineral density (BMD) is measured in the clinical practice and is applied in computational application to derive material proprieties of bone tissue. However, BMD cannot identify if the variation in bone density is related to a modification of tissue mineral density (TMD), a change in bone volume or a combination of the two. This study was aimed to investigate whether TMD can be assumed as a constant in adult human bone (trabecular and cortical).A total number of 115 cylindrical bone specimens were collected. An inter-site analysis (96 specimens, 2 donors) was performed on cortical and trabecular specimens extracted from different anatomical sites. An intra-site study (19 specimens, 19 donors) was performed on specimens extracted from femoral heads. Bone volume fraction (BV/TV) was computed by means of a micro-computed tomography. Furthermore, ash density (ρ_ash) was measured. TMD was computed as the ratio between ρ_ash and BV/TV.It was found that the TMD of trabecular (1.24±0.16 g/cm³) and cortical (1.19±0.06 g/cm³) bone were not statistically different (p=0.31). Furthermore, the linear regression between ρ_ash and BV/TV was statistically significant (r²=0.99, p<0.001). Intra- and inter-site analyses demonstrated that the mineral distribution was independent of the extraction site.The present study suggests that TMD can be assumed reasonably constant in non-pathological adult bone tissue. Consequently, it is suggested that TMD can be managed as a constant in computational models, varying only BV in relation to clinical densitometric analysis.     

Aging and Estrogen Status: A Possible Endothelium-Dependent Vascular Coupling Mechanism in Bone Remodeling

Bone loss with aging and menopause may be linked to vascular endothelial dysfunction. The purpose of the study was to determine whether putative modifications in endothelium-dependent vasodilation of the principal nutrient artery (PNA) of the femur are associated with changes in trabecular bone volume (BV/TV) with altered estrogen status in young (6 mon) and old (24 mon) female Fischer-344 rats. Animals were divided into 6 groups: 1) young intact, 2) old intact, 3) young ovariectomized (OVX), 4) old OVX, 5) young OVX plus estrogen replacement (OVX+E2), and 6) old OVX+E2. PNA endothelium-dependent vasodilation was assessed in vitro using acetylcholine. Trabecular bone volume of the distal femoral metaphysis was determined by microCT. In young rats, vasodilation was diminished by OVX and restored with estrogen replacement (intact, 82±7; OVX, 61±9; OVX+E2, 90±4%), which corresponded with similar modifications in BV/TV (intact, 28.7±1.6; OVX, 16.3±0.9; OVX+E2, 25.7±1.4%). In old animals, vasodilation was unaffected by OVX but enhanced with estrogen replacement (intact, 55±8; OVX, 59±7; OVX+E2, 92±4%). Likewise, modifications in BV/TV followed the same pattern (intact, 33.1±1.6; OVX, 34.4±3.7; OVX+E2, 42.4±2.1%). Furthermore, in old animals with low endogenous estrogen (i.e., intact and old OVX), vasodilation was correlated with BV/TV (R² = 0.630; P<0.001). These data demonstrate parallel effects of estrogen on vascular endothelial function and BV/TV, and provide for a possible coupling mechanism linking endothelium-dependent vasodilation to bone remodeling.     

显微CT在骨微结构研究中的应用

该文对OPG基因敲除小鼠进行micro-CT扫描,进行全身骨骼三维重建,并分析股骨结构。结果发现OPG基因敲除纯合子小鼠全身骨骼出现弥漫性蜂窝状低密度影。OPG基因敲除小鼠的骨密度、骨结构模型指数、骨小梁厚度、骨体积分数、骨表面积与体积比、连接密度以及皮质骨厚度等指标均明显小于同窝野生型小鼠,而两基因型小鼠在骨小梁数目、骨小梁分离度及各项异性度等方面无明显差异。以上数据结果表明,OPG基因敲除导致小鼠出现骨质疏松。应用micro-CT可以对小鼠骨进行无创微结构分析,较体视学方法具有一定的优势。     

Combination of topological parameters and bone volume fraction better predicts the mechanical properties of trabecular bone

Trabecular bone structure may complement bone volume/total volume fraction (BV/TV) in the prediction of the mechanical properties. Nonetheless, the direct in vivo use of information pertaining to trabecular bone structure necessitates some predictive analytical model linking structure measures to mechanical properties. In this context, the purpose of this study was to combine BV/TV and topological parameters so as to better estimate the mechanical properties of trabecular bone. Thirteen trabecular bone mid-sagittal sections were imaged by magnetic resonance (MR) imaging at the resolution of 117 x 117x 300 microm(3). Topological parameters were evaluated in applying the 3D-line skeleton graph analysis (LSGA) technique to the binary MR images. The same images were used to estimate the elastic moduli by finite element analysis (FEA). In addition to the mid-sagittal section, two cylindrical samples were cored from each vertebra along vertical and horizontal directions. Monotonic compression tests were applied to these samples to measure both vertical and horizontal ultimate stresses. BV/TV was found as a strong predictor of the mechanical properties, accounting for 89-94% of the variability of the elastic moduli and for 69-86% of the variability of the ultimate stresses. Topological parameters and BV/TV were combined following two analytical formulations, based on: (1) the normalization of the topological parameters; and on (2) an exponential fit-model. The normalized parameters accounted for 96-98% of the variability of the elastic moduli, and the exponential model accounted for 80-95% of the variability of the ultimate stresses. Such formulations could potentially be used to increase the prediction of the mechanical properties of trabecular bone.     

Single limb immobilization model for bone loss from unloading

Hindlimb suspension is the most used model for inducing bone loss from unloading but requires a separate ground control group. This control group cannot be used for genetic studies involving outbred mice. In this study, we evaluated a single limb immobilization (SLI) model for inducing bone loss from unloading, with the contralateral limb from the same animal used as a control. Male 10-week old C57Bl/6J mice had one limb immobilized for one, two, or three weeks. Subsequently, an additional group of male 16-week old C57Bl/6J mice had one limb immobilized for three weeks. SLI resulted in decreased tibial trabecular BV/TV, Tb Th, and Tb N compared to contralateral limbs in young mice. Femoral trabecular BV/TV, Tb Th, Tb N, and femoral cortical area fraction were also decreased. Mechanical properties were not affected after three weeks. In adult mice, femoral trabecular BV/TV, Tb Th, and Tb N were decreased. Femoral stiffness, ultimate stress, and Young’s modulus were decreased. Bone properties decreased by SLI were also decreased by hindlimb suspension previously. The results suggest SLI can be an effective model for inducing bone loss in growing and adult mice after three weeks of immobilization.     

Structure-based mutation analysis shows the importance of LRP5 beta-propeller 1 in modulating Dkk1-mediated inhibition of Wnt signaling

A single point mutation (G to T) in the low-density lipoprotein receptor related protein 5 (LRP5) gene results in a glycine to valine amino acid change (G171V) and is responsible for an autosomal dominant high bone mass trait (HBM) in two independent kindreds. LRP5 acts as a co-receptor to Wnts with Frizzled family members and transduces Wnt-canonical signals which can be antagonized by LRP5 ligand, Dickkopf 1 (Dkk1). In the presence of Wnt1, LRP5 or the HBM variant (LRP5-G171V) induces beta-catenin nuclear translocation and activates T cell factor (TCF)-luciferase reporter activity. HBM variant suppresses Dkk1 function and this results in reduced inhibition of TCF activity as compared to that with LRP5. Structural analysis of LRP5 revealed that the HBM mutation lies in the 4th blade of the first beta-propeller domain. To elucidate the functional significance and consequence of the LRP5-G171V mutation in vitro, we took a structure-based approach to design 15 specific LRP5 point mutations. These included (a) substitutions at the G171 in blade 4, (b) mutations in blades 2-6 of beta-propeller 1, and (c) mutations in beta-propellers 2, 3 and 4. Here we show that substitutions of glycine at 171 to K, F, I and Q also resulted in HBM-like activity in the presence of Wnt1 and Dkk1. This indicates the importance of the G171 site rather than the effect of specific amino acid modification to LRP5 receptor function. Interestingly, G171 equivalent residue mutations in other blades of beta-propeller 1 (A65V, S127V, L200V, A214V and M282V) resulted in LRP5-G171V-like block of Dkk1 function. However G171V type mutations in other beta-propellers of LRP5 did not result in resistance to Dkk1 function. These results indicate the importance of LRP5 beta-propeller 1 for Dkk1 function and Wnt signaling. These data and additional comparative structural analysis of the LRP5 family member LDLR suggest a potential functional role of the first beta-propeller domain through intramolecular interaction with other domains of LRP5 wherein Dkk1 can bind. Such studies may also lead to a better understanding of the mechanisms underlying the reduced function of Dkk1-like inhibitory ligands of LRP5 with HBM-like mutations and its relationship to increased bone density phenotypes.     

Quantification of Mineralized Bone Response to Prostate Cancer by Noninvasive In Vivo μCT and Non-Destructive Ex Vivo μCT and DXA in a Mouse Model

Background

To compare nondestructive in vivo and ex vivo micro-computed tomography (μCT) and ex vivo dual-energy-X-ray-absorptiometry (DXA) in characterizing mineralized cortical and trabecular bone response to prostate cancer involving the skeleton in a mouse model.

Methodology/Principal Findings

In vivo μCT was performed before and 10 weeks after implantation of human prostate cancer cells (MDA-PCa-2b) or vehicle into SCID mouse femora. After resection, femora were imaged by nondestructive ex vivo specimen μCT at three voxel sizes (31 µ, 16 µ, 8 µ) and DXA, and then sectioned for histomorphometric analysis of mineralized bone. Bone mineral density (BMD), trabecular parameters (number, TbN; separation, TbSp; thickness, TbTh) and mineralized bone volume/total bone volume (BV/TV) were compared and correlated among imaging methods and histomorphometry. Statistical tests were considered significant if P<0.05. Ten weeks post inoculation, diaphyseal BMD increased in the femur with tumor compared to the opposite femur by all modalities (p<0.005, n = 11). Diaphyseal BMD by in vivo μCT correlated with ex vivo 31 and 16 µm μCT and histomorphometry BV/TV (r = 0.91–0.94, P<0.001, n = 11). DXA BMD correlated less with bone histomorphometry (r = 0.73, P<0.001, n = 11) and DXA did not distinguish trabeculae from cortex. By in vivo and ex vivo μCT, trabecular BMD decreased (P<0.05, n = 11) as opposed to the cortex. Unlike BMD, trabecular morphologic parameters were threshold-dependent and when using “fixed-optimal-thresholds,” all except TbTh demonstrated trabecular loss with tumor and correlated with histomorphometry (r = 0.73–0.90, P<0.05, n = 11).

Conclusions/Significance

Prostate cancer involving the skeleton can elicit a host bone response that differentially affects the cortex compared to trabeculae and that can be quantified noninvasively in vivo and nondestructively ex vivo.     

Fluoxetine treatment increases trabecular bone formation in mice

Mounting evidence exists for the operation of a functional serotonin (5-HT) system in osteoclasts and osteoblasts, which involves both receptor activation and 5-HT reuptake. In previous work we showed that the serotonin transporter (5-HTT) is expressed in osteoclasts and that its activity is required by for osteoclast differentiation in vitro. The purpose of the current study was to determine the effect of treatment with fluoxetine, a specific serotonin reuptake inhibitor, on bone metabolism in vivo. Systemic administration of fluoxetine to Swiss-Webster mice for 6 weeks resulted in increased trabecular BV and BV/TV in femurs and vertebrae as determined by micro-computed tomography (microCT). This correlated with an increase in trabecular number, connectivity, and decreased trabecular spacing. Fluoxetine treatment also resulted in increased volume in vertebral trabecular bone. However, fluoxetine-treated mice were not protected against bone loss after ovariectomy, suggesting that its anabolic effect requires the presence of estrogen. The effect of blocking the 5-HTT on bone loss following an LPS-mediated inflammatory challenge was also investigated. Subcutaneous injections of LPS over the calvariae of Swiss-Webster mice for 5 days resulted in increased numbers of osteoclasts and net bone loss, whereas new bone formation and a net gain in bone mass was seen when LPS was given together with fluoxetine. We conclude that fluoxetine treatment in vivo leads to increased bone mass under normal physiologic or inflammatory conditions, but does not prevent bone loss associated with estrogen deficiency. These data suggest that commonly used anti-depressive agents may affect bone mass.     

Time course changes to structural,mechanical and material properties of bone in rats after complete spinal cord injury

Objective:Characterise the spatiotemporal trabecular and cortical bone responses to complete spinal cord injury (SCI) in young rats.Methods:8-week-old male Wistar rats received T9-transection SCI and were euthanised 2-, 6-, 10- or 16-weeks post-surgery. Outcome measures were assessed using micro-computed tomography, mechanical testing, serum markers and Fourier-transform infrared spectroscopy.Results:The trabecular and cortical bone responses to SCI are site-specific. Metaphyseal trabecular BV/TV was 59% lower, characterised by fewer and thinner trabeculae at 2-weeks post-SCI, while epiphyseal BV/TV was 23% lower with maintained connectivity. At later-time points, metaphyseal BV/TV remained unchanged, while epiphyseal BV/TV increased. The total area of metaphyseal and mid-diaphyseal cortical bone were lower from 2-weeks and between 6- and 10-weeks post-SCI, respectively. This suggested that SCI-induced bone changes observed in the rat model were not solely attributable to bone loss, but also to suppressed bone growth. No tissue mineral density differences were observed at any time-point, suggesting that decreased whole-bone mechanical properties were primarily the result of changes to the spatial distribution of bone.Conclusion:Young SCI rat trabecular bone changes resemble those observed clinically in adult and paediatric SCI, while cortical bone changes resemble paediatric SCI only.     

Gender-related changes in three-dimensional microstructure of trabecular bone at the human proximal tibia with aging

Despite increasing interest in age- and gender-related bone alterations, data on trabecular microstructure at the proximal tibia are scarce. The aim of this study was to identify trabecular microstructural change at the human proximal tibia with age and gender, using micro-computed tomography (micro-CT) and scanning electron microscopy (SEM). Fifty-six proximal tibias from 28 Japanese men and women (57-98 years of age) were used in this study. The subjects were chosen to give an even age and gender distribution. Both women and men were divided into three age groups, middle (57-68 years), old (72-82 years) and elderly (87-98 years) groups. The trabecular bone specimens from the medial compartment of the proximal tibial metaphysis were examined. Trabecular bone mineral density (BMD), bone volume fraction (BV/TV) and trabecular thickness (Tb.Th) decreased between the middle-aged and elderly groups similarly in women and men. However, trabecular number (Tb.N) decreased by 13% between the middle-aged and elderly groups in women and nearly double that in men. As compared with women, men had higher BV/TV and lower trabecular separation (Tb.Sp) in the old age and elderly groups, and higher Tb.N and connectivity density (Conn.D) in the elderly group. Increased trabecular resorbing surfaces, perforated or disconnected trabeculae and microcallus formations were observed with age. These findings indicate that both BMD and BV/TV decreased at the proximal tibia with age similarly for women and men, but significant differences between women and men were observed for some microstructural parameters. These findings illustrate potential mechanisms underlying osteoporotic proximal tibial fracture.     

Low-Level Vibrations Retain Bone Marrow's Osteogenic Potential and Augment Recovery of Trabecular Bone during Reambulation

Mechanical disuse will bias bone marrow stromal cells towards adipogenesis, ultimately compromising the regenerative capacity of the stem cell pool and impeding the rapid and full recovery of bone morphology. Here, it was tested whether brief daily exposure to high-frequency, low-magnitude vibrations can preserve the marrow environment during disuse and enhance the initiation of tissue recovery upon reambulation. Male C57BL/6J mice were subjected to hindlimb unloading (HU, n = 24), HU interrupted by weight-bearing for 15 min/d (HU+SHAM, n = 24), HU interrupted by low-level whole body vibrations (0.2 g, 90 Hz) for 15 min/d (HU+VIB, n = 24), or served as age-matched controls (AC, n = 24). Following 3 w of disuse, half of the mice in each group were released for 3 w of reambulation (RA), while the others were sacrificed. RA+VIB mice continued to receive vibrations for 15 min/d while RA+SHAM continued to receive sham loading. After disuse, HU+VIB mice had a 30% greater osteogenic marrow stromal cell population, 30% smaller osteoclast surface, 76% greater osteoblast surface but similar trabecular bone volume fraction compared to HU. After 3 w of reambulation, trabecular bone of RA+VIB mice had a 30% greater bone volume fraction, 51% greater marrow osteoprogenitor population, 83% greater osteoblast surfaces, 59% greater bone formation rates, and a 235% greater ratio of bone lining osteoblasts to marrow adipocytes than RA mice. A subsequent experiment indicated that receiving the mechanical intervention only during disuse, rather than only during reambulation, was more effective in altering trabecular morphology. These data indicate that the osteogenic potential of bone marrow cells is retained by low-magnitude vibrations during disuse, an attribute which may have contributed to an enhanced recovery of bone morphology during reambulation.     

Dependence of mechanical properties of trabecular bone on plate–rod microstructure determined by individual trabecula segmentation (ITS)

Individual trabecula segmentation (ITS) technique can decompose the trabecular bone network into individual trabecular plates and rods and is capable of quantifying the plate/rod-related microstructural characteristics of trabecular bone. This novel technique has been shown to be able to provide in-depth insights into micromechanics and failure mechanisms of human trabecular bone, as well as to distinguish the fracture status independent of area bone mineral density in clinical applications. However, the plate/rod microstructural parameters from ITS have never been correlated to experimentally determined mechanical properties of human trabecular bone. In this study, on-axis cylindrical trabecular bone samples from human proximal tibia (n=22), vertebral body (n=10), and proximal femur (n=21) were harvested, prepared, scanned using micro computed-tomography (µCT), analyzed with ITS and mechanically tested. Regression analyses showed that the plate bone volume fraction (pBV/TV) and axial bone volume fraction (aBV/TV) calculated by ITS analysis correlated the best with elastic modulus (R²=0.96–0.97) and yield strength (R²=0.95–0.96). Trabecular plate-related microstructural parameters correlated highly with elastic modulus and yield strength, while most rod-related parameters were found inversely and only moderately correlated with the mechanical properties. In addition, ITS analysis also identified that trabecular bone at human femoral neck had the highest trabecular plate-related parameters while the other sites were similar with each other in terms of plate–rod microstructure.     

Effects of long-term supplementation with omega-3 fatty acids on longitudinal changes in bone mass and microstructure in mice

A diet rich in omega-3s has previously been suggested to prevent bone loss. However, evidence for this has been limited by short exposure to omega-3 fatty acids (FAs). We investigated whether a diet enriched in eicosapentaenoic acid (EPA) or docosahexaenoic acid (DHA) for the entire adult life of mice could improve bone microstructure and strength. Thirty female mice received a diet enriched in DHA or EPA or an isocaloric control diet from 3 to 17 months of age. Changes in bone microstructure were analyzed longitudinally and biomechanical properties were analysed by a three-point bending test. Bone remodelling was evaluated by markers of bone turnover and histomorphometry. Trabecular bone volume in caudal vertebrae was improved by EPA or DHA at 8 months (+26.6% and +17.2%, respectively, compared to +3.8% in controls, P=.01), but not thereafter. Trabecular bone loss in the tibia was not prevented by omega-3 FAs (BV/TV −94%, −93% and −97% in EPA, DHA and controls, respectively). EPA improved femur cortical bone volume (+8.1%, P<.05) and thickness (+4.4%, P<.05) compared to controls. EPA, but not DHA, reduced age-related decline of osteocalcin (−70% vs. −83% in controls, P<.05). EPA and DHA increased leptin levels (7.3±0.7 and 8.5±0.5 ng ml⁻¹, respectively, compared to 4.5±0.9 ng ml⁻¹ in controls, P=.001); however, only EPA further increased IGF-1 levels (739±108 ng ml⁻¹, compared to 417±58 ng ml⁻¹ in controls, P=.04). These data suggest that long-term intake of omega-3 FA, particularly EPA, may modestly improve the structural and mechanical properties of cortical bone by an increase in leptin and IGF-1 levels, without affecting trabecular bone loss.     

A Comparison of Micro-CT and Dental CT in Assessing Cortical Bone Morphology and Trabecular Bone Microarchitecture

Objective

The objective of this study was to evaluate the relationship between the trabecular bone microarchitecture and cortical bone morphology by using micro-computed tomography (micro-CT) and dental cone-beam computed tomography (dental CT).

Materials and Methods

Sixteen femurs and eight fifth lumbar vertebrae were collected from eight male Sprague Dawley rats. Four trabecular bone microarchitecture parameters related to the fifth lumbar vertebral body (percent bone volume [BV/TV], trabecular thickness [TbTh], trabecular separation [TbSp], and trabecular number [TbN]) were calculated using micro-CT. In addition, the volumetric cancellous bone grayscale value (vCanGrayscale) of the fifth lumbar vertebral body was measured using dental CT. Furthermore, four cortical bone morphology parameters of the femoral diaphysis (total cross-sectional area [TtAr], cortical area [CtAr], cortical bone area fraction [CtAr/TtAr], and cortical thickness [CtTh]) were calculated using both micro-CT and dental CT. Pearson analysis was conducted to calculate the correlation coefficients (r) of the micro-CT and dental CT measurements. Paired-sample t tests were used to compare the differences between the measurements of the four cortical bone morphology parameters obtained using micro-CT and dental CT.

Results

High correlations between the vCanGrayscale measured using dental CT and the trabecular bone microarchitecture parameters (BV/TV [r = 0.84] and TbTh [r = 0.84]) measured using micro-CT were observed. The absolute value of the four cortical bone morphology parameters may be different between the dental CT and micro-CT approaches. However, high correlations (r ranged from 0.71 to 0.90) among these four cortical bone morphology parameters measured using the two approaches were obtained.

Conclusion

We observed high correlations between the vCanGrayscale measured using dental CT and the trabecular bone microarchitecture parameters (BV/TV and TbTh) measured using micro-CT, in addition to high correlations between the cortical bone morphology measured using micro-CT and dental CT. Further experiments are necessary to validate the use of dental CT on human bone.     

Heterogeneity of yield strain in low-density versus high-density human trabecular bone

Understanding the off-axis behavior of trabecular yield strains may lend unique insight into the etiology of fractures since yield strains provide measures of failure independent of elastic behavior. We sought to address anisotropy of trabecular yield strains while accounting for variations in both density and anatomic site and to determine the mechanisms governing this behavior. Cylindrical specimens were cored from vertebral bodies (n=22, BV/TV=0.11±0.02) and femoral necks (n=28, BV/TV=0.22±0.06) with the principal trabecular orientation either aligned along the cylinder axis (on-axis, n=22) or at an oblique angle of 15° or 45° (off-axis, n=28). Each specimen was scanned with micro-CT, mechanically compressed to failure, and analysed with nonlinear micro-CT-based finite element analysis. Yield strains depended on anatomic site (p=0.03, ANOVA), and the effect of off-axis loading was different for the two sites (p=0.04)—yield strains increased for off-axis loading of the vertebral bone (p=0.04), but were isotropic for the femoral bone (p=0.66). With sites pooled together, yield strains were positively correlated with BV/TV for on-axis loading (R²=58%, p<0.0001), but no such correlation existed for off-axis loading (p=0.79). Analysis of the modulus-BV/TV and strength-BV/TV relationships indicated that, for the femoral bone, the reduction in strength associated with off-axis loading was greater than that for modulus, while the opposite trend occurred for the vertebral bone. The micro-FE analyses indicated that these trends were due to different failure mechanisms for the two types of bone and the different loading modes. Taken together, these results provide unique insight into the failure behavior of human trabecular bone and highlight the need for a multiaxial failure criterion that accounts for anatomic site and bone volume fraction.