Detection of phenolic compounds using impedance spectroscopy measurements

Langmuir-Blodgett (LB) and layer-by-layer films (LbL) of a PPV (p-phenylenevinylene) derivative, an azo compound and tetrasulfonated phthalocyanines were successfully employed as transducers in an “electronic tongue” system for detecting trace levels of phenolic compounds in water. The choice of the materials was based on their distinct electrical natures, which enabled the array to establish a fingerprint of very similar liquids. Impedance spectroscopy measurements were taken in the frequency range from 10 Hz to 1 MHz, with the data analysed with principal component analysis (PCA). The sensing units were obtained from five-layer LB films of (poly[(2-methoxy-5-n-hexyloxy)-p-phenylenevinylene]), OC₁OC₁₈-PPV (poly(2-methoxy,5-(n-octadecyl)-p-phenylenevinylene)), DR (HEMA-co-DR13MA (poly-(hydroxyethylmethacrylate-co-[4′-[[2-(methacryloyloxy)-ethyl]ethylamino]-2-chloro-4-nitroazobenzene]))) and five-bilayer LbL films of tetrasulfonated metallic phthalocyanines deposited onto gold interdigitated electrodes. The sensors were immersed into phenol, 2-chloro-4-methoxyphenol, 2-chlorophenol and 3-chlorophenol (isomers) solutions at 1 × 10⁻⁹ mol L⁻¹, with control experiments carried out in ultra pure water. Samples could be distinguished if the principal component analysis (PCA) plots were made with capacitance values taken at 10³ Hz, which is promising for detection of trace amounts of phenolic pollutants in natural water.     

Photodynamic Therapy with Blended Conducting Polymer/Fullerene Nanoparticle Photosensitizers

In this article a method for the fabrication and reproducible in-vitro evaluation of conducting polymer nanoparticles blended with fullerene as the next generation photosensitizers for Photodynamic Therapy (PDT) is reported. The nanoparticles are formed by hydrophobic interaction of the semiconducting polymer MEH-PPV (poly[2-methoxy-5-(2-ethylhexyloxy)-1,4-phenylenevinylene]) with the fullerene PCBM (phenyl-C₆₁-butyric acid methyl ester) in the presence of a non-compatible solvent. MEH-PPV has a high extinction coefficient that leads to high rates of triplet formation, and efficient charge and energy transfer to the fullerene PCBM. The latter processes enhance the efficiency of the PDT system through fullerene assisted triplet and radical formation, and ultrafast deactivation of MEH-PPV excited stated. The results reported here show that this nanoparticle PDT sensitizing system is highly effective and shows unexpected specificity to cancer cell lines.     

Cloning and characterization of a thermostable and halo-tolerant endoglucanase from <Emphasis Type="Italic">Thermoanaerobacter tengcongensis</Emphasis> MB4

A β-1,4-endoglucanase (Cel5A) was cloned from the genomic DNA of saccharolytic thermophilic eubacterium Thermoanaerobacter tengcongensis MB4 and functionally expressed in Escherichia coli. Substrate specificity analysis revealed that Cel5A cleaves specifically the β-1,4-glycosidic linkage in cellulose with high activity (294 U mg⁻¹; carboxymethyl cellulose sodium (CMC)). On CMC, kinetics of Cel5A was determined (K _m 1.39 ± 0.12 g l⁻¹; k _cat/K _m 1.41 ± 0.13 g⁻¹ s⁻¹). Cel5A displays an activity optimum between 75 and 80 °C. Residues Glu187 and Glu289 were identified as key catalytic amino acids by sequence alignment. Interestingly, derived from a non-halophilic bacterium, Cel5A exhibits high residual activities in molar concentration of NaCl (3 M, 49.3%) and KCl (4 M, 48.6%). In 1 M NaCl, 82% of Cel5A activity is retained after 24 h incubation. Molecular Dynamics studies performed at 0 and 3 M NaCl, correlate the Cel5A stability to the formation of R-COO⁻···Na⁺ ···⁻OOC-R salt bridges within the Cel5A tertiary structure, while activity possibly relates to the number of Na⁺ ions trapped into the negatively charged active site, involving a competition mechanism between substrate and Na⁺. Additionally, Cel5A is remarkably resistant in ionic liquids 1-butyl-3-methyllimidazolium chloride (1 M, 54.4%) and 1-allyl-3-methylimidazolium chloride (1 M, 65.1%) which are promising solvents for cellulose degradation and making Cel5A an attractive candidate for industrial applications.     

Identification and characterization of 4-hexylbenzoic acid and 4-nonyloxybenzoic acid as substrates of CYP102A1

CYP102A1 is an efficient medium- to long-chain fatty acid hydroxylase that is able to accept a wide range of non-natural substrates which bear no resemblance to the natural ones. 4-Hexylbenzoic acid (HBA) and 4-nonyloxybenzoic acid (NOBA) were identified as CYP102A1 substrates via screening studies using the BD Oxygen Biosensor System. Spectroscopic binding studies showed that these two substrates bind in the active site of CYP102A1 with K _d values of 2.6 ± 0.1 μM for HBA and 1.9 ± 0.2 μM for NOBA. NADPH consumption rates in the presence of HBA and NOBA were 45 ± 1 min⁻¹ and 61 ± 1 min⁻¹, respectively. The coupling efficiency for NADPH was 57% for NOBA, while it was 77% for HBA. During whole-cell biotransformations, HBA was converted into ω−1- and ω−2-hydroxyhexylbenzoic acid, whereas NOBA was oxidized to ω−2-hydroxynonyloxybenzoic acid and ω−2,ω−4-dihydroxynonyloxybenzoic acid. HBA was used as a fatty acid mimic to compare whole-cell biotransformations with cell-free extracts. Whole-cell biotransformations carried out in a biphasic system resulted in 86% conversion of 5 mM HBA, producing 3.8 mM ω−2- and 0.5 mM ω−1-hydroxyhexylbenzoic acid in 4 h with a turnover number of 4.1 min⁻¹, whereas 100% conversion of 5 mM HBA was obtained in 1 h with crude cell extracts and a cofactor regeneration system, giving a turnover number of 10.5 min⁻¹.     

Physiology of acute silver toxicity in the starry flounder (Platichthys stellatus) in seawater

Physiological effects of exposure to silver (AgCl_n ⁿ⁻¹; 250 μg Ag l⁻¹ or 1000 μg Ag l⁻¹) in seawater fish were investigated using adult starry flounders. While all fish survived up to 10 days in 250 μg Ag l⁻¹, flounders started to die after day 4 in 1000 μg l⁻¹. Dose-dependent increases in plasma and hepatic silver concentrations showed that silver was available for uptake. There were minimal negative effects on hematological parameters, acid-base status, and blood gases. Plasma ammonia showed a pronounced (three- to four-fold), but transient increase in flounders exposed to either 250 μg Ag l⁻¹ or 1000 μg Ag l⁻¹. Whole body ammonia and acid equivalent efflux measurements indicated that ammonia retention was due to a combination of stimulated production and inhibited excretion. In the 1000-μg Ag l⁻¹ group there was a similar transient increase in plasma [magnesium], which was restored by day 4. In contrast, plasma chloride and sodium levels increased gradually towards the point when fish began to die. At 250 μg Ag l⁻¹, the Na⁺/K⁺-ATPase activity of the intestine was unaffected but there was a two-fold increase in branchial Na⁺/K⁺-ATPase activity. The latter effect was interpreted as compensation for an elevated chloride and sodium load. The increases in plasma chloride and sodium concentrations were accompanied by a marked suppression of drinking, thereby indicating that acute silver toxicity was likely caused by a combination of elevated electrolyte concentrations and dehydration. Accepted: 9 June 1999     

Cloning and functional characterization of a novel endo-β-1,4-glucanase gene from a soil-derived metagenomic library

A metagenomic library consisting of 3,024 bacterial artificial chromosome clones was prepared in Escherichia coli DH10B with high-molecular-weight DNA extracted from red soil in South China. A novel cellulase gene with an open reading frame of 1,332 bp, cel5G, encoding an endo-β-1,4-glucanase was cloned using an activity-based screen. The deduced enzyme, Cel5G, belongs to the glycosyl hydrolase family 5 and shares <39% identity with endoglucanases in the GenBank database. cel5G was expressed in E. coli BL21, and the recombinant enzyme Cel5G was purified to homogeneity for enzymatic analysis. Cel5G hydrolyzed a wide range of β-1,4-, β-1,3/β-1,4-, or β-1,3/β-1,6-linked polysaccharides, amorphous cellulose, filter paper, and microcrystalline cellulose. Its highest activity was in 50 mM citrate buffer, pH 4.8, at 50°C. Cel5G is stable over a wide range of pH values (from 2.0 to 10.6) and is thermally stable under 60°C. It is highly tolerant and active in high salt concentrations and is stable in the presence of pepsin and pancreatin. The K _m and V _max values of Cel5G for carboxymethyl cellulose are 19.92 mg/ml and 1,941 μmol min⁻¹ mg⁻¹, respectively. These characteristics indicate that Cel5G has potential for industrial use.     

Highly efficient plant regeneration and <Emphasis Type="Italic">in vitro</Emphasis> polyploid induction using hypocotyl explants from diploid mulberry (<Emphasis Type="Italic">Morus multicaulis</Emphasis> Poir.)

Efficient plant regeneration is essential for successful transformation and in vitro polyploidy induction in mulberry. A high frequency (80%) of plant regeneration from hypocotyls occurred under in vitro conditions in mulberry (Morus multicaulis Poir.). We identified three key factors for enhancing successful regeneration based on earlier work: (1) hypocotyl position, (2) the combination and concentration of growth regulators, and (3) the addition of AgNO₃. The highest frequency of shoot regeneration was achieved using hypocotyl segments, which are proximal to apical meristems, and the optimal culture conditions were Murashige and Skoog’s (MS) (Murashige and Skoog, 1962) basal medium supplemented with 3.0 mg l⁻¹ 6-benzylamino purine, 0.3 mg l⁻¹ indole-3-acetic acid, 0.1% polyvinypyrrolidone, and 1.0 mg/l silver nitrate (AgNO₃) under subdued light at 25 ± 2°C. Treating the shoots with 0.2% colchicine (dipping for 72 h) resulted in a 14% tetraploid frequency, whereas a 20% tetraploid frequency resulted from using a 0.25% colchicine (dripping for 5 d) treatment, as determined by chromosome number counts. The diploid plant chromosome number was 28 (2n = 2x = 28) and that of tetraploid plants was 56 (2n = 4x = 56). Regenerated shoots rooted easily in 8–10 d using half-strength basal MS medium with 0.5 mg l⁻¹ indole-3-butyric acid and were successfully established in the soil.     

Palm oil mill effluent (POME) cultured marine microalgae as supplementary diet for rotifer culture

Malaysia is the world’s leading producer of palm oil products that contribute US$ 7.5 billion in export revenues. Like any other agro-based industries, it generates waste that could be utilized as a source of organic nutrients for microalgae culture. Present investigation delves upon Isochrysis sp. culture in POME modified medium and its utilization as a supplement to Nanochloropsis sp. in rotifer cultures. The culture conditions were optimized using a 1 L photobioreactor (Temp: 23°C, illumination: 180 ∼ 200 μmol photons m⁻²s⁻¹, n = 6) and scaled up to 10 L outdoor system (Temp: 26–29°C, illumination: 50 ∼ 180 μmol photons m⁻²s⁻¹, n = 3). Algal growth rate in photobioreactor (μ = 0.0363 h⁻¹) was 55% higher compared to outdoor culture (μ = 0.0163 h⁻¹), but biomass production was 1.3 times higher in outdoor culture (Outdoor = 91.7 mg m⁻²d⁻¹; Photobioreactor = 69 mg m⁻²d⁻¹). Outdoor culture produced 18% higher lipid; while total fatty acids (FA) was not significantly affected by the change in culture systems as both cultures yield almost similar concentrations of fatty acids per gram of sample (photobioreactor = 119.17 mg g⁻¹; outdoor culture = 104.50 mg g⁻¹); however, outdoor cultured Isochrysis sp. had 26% more polyunsaturated fatty acids (PUFAs). Rotifers cultured in Isochrysis sp./ Nanochloropsis sp. (1:1, v/v) mixture gave similar growth rate as 100% Nanochoropsis sp. culture (μ = 0.40 d⁻¹), but had 45% higher counts of rotifers with eggs (t = 7, maximum). The Isochrysis sp. culture successfully lowered the nitrate (46%) and orthophosphate (83%) during outdoor culture.     

Use of Acadian marine plant extract powder from Ascophyllum nodosum in tissue culture of Kappaphycus varieties

Three varieties of Kappaphycus alvarezii (Kapilaran, KAP), Tambalang purple (PUR), Adik-adik (AA), and one variety of Kappaphycus striatum var. sacol (green sacol (GS) were used to determine the efficiency of Acadian marine plant extract powder (AMPEP) as a culture medium at different concentrations, for the regeneration of young plants of Kappaphycus varieties, using tissue culture techniques for the production of seed stock for nursery and outplanting purposes for the commercial cultivation of carrageenophytes. A shorter duration for shoot formation was observed when the explant was treated with AMPEP + Plant Growth Regulator (PGR = PAA + zeatin at 1 mg L⁻¹) compared to AMPEP when used singly. However, four explants responded differently to the number of days required for shoot formation. The KAP variety took 46 days to form shoots at 3–4 mg L⁻¹ AMPEP + PGR; while PUR required 21 days at 3–5 mg L⁻¹ AMPEP and 3–4 mg L⁻¹ AMPEP + PGR. AA required 17 days at 3–5 mg L⁻¹ AMPEP and AMPEP + PGR; and GS 25 days at 1 mg L⁻¹ AMPEP + PGR. It was observed that among the four explants used, PUR and AA initiated shoot formation with the use of AMPEP only at higher concentrations (3–5 mg L⁻¹) after a shorter period. Only PUR responded positively to ESS/2 for shoot initiation. The use of AMPEP alone and/or in combination with PGR as a culture medium in the propagation of microplantlets using tissue culture technique is highly encouraging.     

The Relative Rates of Thiol–Thioester Exchange and Hydrolysis for Alkyl and Aryl Thioalkanoates in Water

This article reports rate constants for thiol–thioester exchange (k _ex), and for acid-mediated (k _a), base-mediated (k _b), and pH-independent (k _w) hydrolysis of S-methyl thioacetate and S-phenyl 5-dimethylamino-5-oxo-thiopentanoate—model alkyl and aryl thioalkanoates, respectively—in water. Reactions such as thiol–thioester exchange or aminolysis could have generated molecular complexity on early Earth, but for thioesters to have played important roles in the origin of life, constructive reactions would have needed to compete effectively with hydrolysis under prebiotic conditions. Knowledge of the kinetics of competition between exchange and hydrolysis is also useful in the optimization of systems where exchange is used in applications such as self-assembly or reversible binding. For the alkyl thioester S-methyl thioacetate, which has been synthesized in simulated prebiotic hydrothermal vents, k _a = 1.5 × 10⁻⁵ M⁻¹ s⁻¹, k _b = 1.6 × 10⁻¹ M⁻¹ s⁻¹, and k _w = 3.6 × 10⁻⁸ s⁻¹. At pH 7 and 23°C, the half-life for hydrolysis is 155 days. The second-order rate constant for thiol–thioester exchange between S-methyl thioacetate and 2-sulfonatoethanethiolate is k _ex = 1.7 M⁻¹ s⁻¹. At pH 7 and 23°C, with [R″S(H)] = 1 mM, the half-life of the exchange reaction is 38 h. These results confirm that conditions (pH, temperature, pK _a of the thiol) exist where prebiotically relevant thioesters can survive hydrolysis in water for long periods of time and rates of thiol–thioester exchange exceed those of hydrolysis by several orders of magnitude.     

NMR Reinvestigation of the Caffeine–Chlorogenate Complex in Aqueous Solution and in Coffee Brews

Caffeine complexation by chlorogenic acid (3-caffeoylquinic acid, CAS Number [327-97-9]) in aqueous solution as well as caffeine–chlorogenate complex in freshly prepared coffee brews have been investigated by high-resolution ¹H-NMR. Caffeine and chlorogenic acid self-associations have also been studied and self-association constants have been determined resorting to both classical isodesmic model and a recently introduced method of data analysis able to provide also the critical aggregation concentration (cac). Furthermore, caffeine–chlorogenate association constant was measured. For the caffeine, the average value of the self-association constant determined by isodesmic model (K _i = 7.6 ± 0.5 M⁻¹) is in good agreement with the average value (K _a = 10 ± 1.8 M⁻¹) determined with the method which permits the determination of the cac (8.43 ± 0.05 mM). Chlorogenic acid shows a slight decreased tendency to aggregation with a lower average value of association constants (K _i = 2.8 ± 0.6 M⁻¹; K _a = 3.4 ± 0.6 M⁻¹) and a critical concentration equal to 24 ± 1 mM. The value of the association constant of the caffeine–chlorogenate complex (30 ± 4 M⁻¹) is compatible with previous studies and within the typical range of reported association constants for other caffeine–polyphenol complexes. Structural features of the complex have also been investigated, and the complex conformation has been rediscussed. Caffeine chemical shifts comparison (monomeric, complexed, coffee brews) clearly indicates a significant amount of caffeine is complexed in beverage real system, being chlorogenate ions the main complexing agents.     

Silver Nanoparticles as a New Solid-Phase Adsorbent and Its Application to Preconcentration and Determination of Lead from Biological Samples

A new, simple, and fast method for preconcentration and determination of trace amount of lead from biological samples was developed by modified silver nanoparticle-based solid-phase extraction technique and graphite furnace atomic absorption spectrometry. In this study, morin was used as a complexing agent. Some factors influencing the recovery of lead including pH, sample flow rate, type, flow rate, and least amount of the eluent for elution of the lead from silver nanoparticles were studied and optimized. Under the optimum conditions, the detection limit of this method was 68 ng L⁻¹, and the relative standard deviation was 4.1% (n = 10, c = 20 μg L⁻¹). The developed procedure was validated by the analysis of certified reference material and applied to the recovery and determination of lead in biological samples.     

Production of hexanoic acid from d-galactitol by a newly isolated Clostridium sp. BS-1

In a study screening anaerobic microbes utilizing d-galactitol as a fermentable carbon source, four bacterial strains were isolated from an enrichment culture producing H₂, ethanol, butanol, acetic acid, butyric acid, and hexanoic acid. Among these isolates, strain BS-1 produced hexanoic acid as a major metabolic product of anaerobic fermentation with d-galactitol. Strain BS-1 belonged to the genus Clostridium based on phylogenetic analysis using 16S rRNA gene sequences, and the most closely related strain was Clostridium sporosphaeroides DSM 1294^T, with 94.4% 16S rRNA gene similarity. In batch cultures, Clostridium sp. BS-1 produced 550 ± 31 mL L⁻¹ of H₂, 0.36 ± 0.01 g L⁻¹ of acetic acid, 0.44 ± 0.01 g L⁻¹ of butyric acid, and 0.98 ± 0.03 g L⁻¹ of hexanoic acid in a 4-day cultivation. The production of hexanoic acid increased to 1.22 and 1.73 g L⁻¹ with the addition of 1.5 g L⁻¹ of sodium acetate and 100 mM 2-(N-morpholino)ethanesulfonic acid (MES), respectively. Especially when 1.5 g L⁻¹ of sodium acetate and 100 mM MES were added simultaneously, the production of hexanoic acid increased up to 2.99 g L⁻¹. Without adding sodium acetate, 2.75 g L⁻¹ of hexanoic acid production from d-galactitol was achieved using a coculture of Clostridium sp. BS-1 and one of the isolates, Clostridium sp. BS-7, in the presence of 100 mM MES. In addition, volatile fatty acid (VFA) production by Clostridium sp. BS-1 from d-galactitol and d-glucose was enhanced when a more reduced culture redox potential (CRP) was applied via addition of Na₂S·9H₂O.     

Interaction Between Nanoparticulate Anatase TiO<Subscript>2</Subscript> and Lactate Dehydrogenase

In order to study the mechanisms underlying the effects of TiO₂ nanoparticles on lactate dehydrogenase (LDH, EC1.1.1.27), Institute of Cancer Research region mice were injected with nanoparticulate anatase TiO₂ (5 nm) of various doses into the abdominal cavity daily for 14 days. We then examined LDH activity in vivo and in vitro and direct evident for interaction between nanoparticulate anatase TiO₂ and LDH using spectral methods. The results showed that nanoparticulate anatase TiO₂ could significantly activate LDH in vivo and in vitro; the kinetics constant (Km) and Vmax were 0.006 μM and 1,149 unit mg⁻¹ protein min⁻¹, respectively, at a low concentration of nanoparticulate anatase TiO₂, and 3.45 and 0.031 μM and 221 unit mg⁻¹ protein min⁻¹, respectively, at a high concentration of nanoparticulate anatase TiO₂. By fluorescence spectral assays, the nanoparticulate anatase TiO₂ was determined to be directly bound to LDH, and the binding constants of the binding site were 1.77 × 10⁸ L mol⁻¹ and 2.15 × 10⁷ L mol⁻¹, respectively, and the binding distance between nanoparticulate anatase TiO₂ and the Trp residue of LDH was 4.18 nm, and nanoparticulate anatase TiO₂ induced the protein unfolding. It was concluded that the binding of nanoparticulate anatase TiO₂ altered LDH structure and function.     

Continuous cultures of <Emphasis Type="Italic">Pseudomonas putida</Emphasis> mt-2 overcome catabolic function loss under real case operating conditions

The long-term performance and stability of Pseudomonas putida mt-2 cultures, a toluene-sensitive strain harboring the genes responsible for toluene biodegradation in the archetypal plasmid pWW0, was investigated in a chemostat bioreactor functioning under real case operating conditions. The process was operated at a dilution rate of 0.1 h⁻¹ under toluene loading rates of 259 ± 23 and 801 ± 78 g m⁻³ h⁻¹ (inlet toluene concentrations of 3.5 and 10.9 g m⁻³, respectively). Despite the deleterious effects of toluene and its degradation intermediates, the phenotype of this sensitive P. putida culture rapidly recovered from a 95% Tol⁻ population at day 4 to approx. 100% Tol⁺ cells from day 13 onward, sustaining elimination capacities of 232 ± 10 g m⁻³ h⁻¹ at 3.5 g Tol m⁻³ and 377 ± 13 g m⁻³ h⁻¹ at 10.9 g Tol m⁻³, which were comparable to those achieved by highly tolerant strains such as P. putida DOT T1E and P. putida F1 under identical experimental conditions. Only one type of Tol⁻ variant, harboring a TOL-like plasmid with a 38.5 kb deletion (containing the upper and meta operons for toluene biodegradation), was identified.     

The −112G > A polymorphism of the secretoglobin 3A2 (<Emphasis Type="Italic">SCGB3A2</Emphasis>) gene encoding uteroglobin-related protein 1 (UGRP1) increases risk for the development of Graves’ disease in subsets of patients with elevated levels of immunoglobulin E

The human secretoglobin 3A2 (SCGB3A2) gene encoding secretory uteroglobin-related protein 1 (UGRP1) resides on the chromosome region 5q31-33 that harbors a susceptibility locus to several autoimmune and inflammatory diseases, including asthma and Graves’ disease (GD). Recently, association between the marker rs1368408 (−112G > A), located in the promoter region of the SCGB3A2 gene, and susceptibility to GD was found in Chinese and UK Caucasians. The study aim was to evaluate whether this polymorphism confers GD susceptibility in a large population cohort comprising 1,474 Russian GD patients and 1,619 controls. The marker rs1368408 was studied using a TaqMan allele discrimination assay. Serum levels of UGRP1 and immunoglobulin E (IgE) were assessed using enzyme-linked immunosorbent assay (ELISA) analyses. Association between the allele A of SCGB3A2 and a higher risk of GD (odds ratio [OR] = 1.33, P = 2.9 × 10⁻⁵) was shown. Both affected and non-affected carriers of the higher risk genotype A/A had significantly decreased levels of serum UGRP1 compared to the subjects homozygous for G/G (93 ± 37 pg/ml vs. 132 ± 45 pg/ml, P = 0.0011 for GD patients; 77 ± 28 pg/ml vs. 119 ± 33 pg/ml, P = 0.0019 for controls). Serum IgE levels were significantly higher in non-affected subjects homozygous for A/A compared to control individuals homozygous for G/G (153 ± 46 IU/ml vs. 122 ± 40 IU/ml, P = 0.0095). Our data suggest that the carriage of the SCGB3A2 −112A/A variant increases the risk for GD in subsets of patients with elevated levels of IgE, a hallmark of allergic asthma. Therefore, the SCGB3A2 −112G > A polymorphism may be considered as a likely marker linking susceptibility to allergy/asthma and GD on chromosome 5q31-33.     

Change in ammonia-oxidizing microorganisms in enriched nitrifying activated sludge

In this study, sludge was taken from a municipal wastewater treatment plant that contained a nearly equal number of archaeal amoA genes (5.70 × 10⁶ ± 3.30 × 10⁵ copies mg sludge⁻¹) to bacterial amoA genes (8.60 × 10⁶ ± 7.64 × 10⁵ copies mg sludge⁻¹) and enriched in three continuous-flow reactors receiving an inorganic medium containing different ammonium concentrations: 2, 10, and 30 mM NH₄⁺–N (28, 140, and 420 mg N l⁻¹). The abundance and communities of ammonia-oxidizing archaea (AOA) and ammonia-oxidizing bacteria (AOB) in enriched nitrifying activated sludge (NAS) were monitored at days 60 and 360 of the operation. Early on, between day 0 and day 60 of reactor operation, comparative abundance of AOA amoA genes to AOB amoA genes varied among the reactors depending on the ammonium levels found in the reactors. As compared to the seed sludge, the number of AOA amoA genes was unchanged in the reactor with lower ammonium level (0.06 ± 0.04 mgN l⁻¹), while in the reactors with higher ammonium levels (0.51 ± 0.33 and 0.25 ± 0.10 mgN l⁻¹), the numbers of AOA amoA genes were deteriorated. By day 360, AOA disappeared from the ammonia-oxidizing consortiums in all reactors. The majority of the AOA sequences from all NASs at each sampling period fell into a single AOA cluster, however, suggesting that the ammonium did not affect the AOA communities under this operational condition. This result is contradictory to the case of AOB, where the communities varied significantly among the NASs. AOB with a high affinity for ammonia were present in the reactors with lower ammonium levels, whereas AOB with a low affinity to ammonia existed in the reactors with higher ammonium levels.     

Simultaneous nutrients and carbon removal during pretreated swine slurry degradation in a tubular biofilm photobioreactor

The biodegradation potential of an innovative enclosed tubular biofilm photobioreactor inoculated with a Chlorella sorokiniana strain and an acclimated activated sludge consortium was evaluated under continuous illumination and increasing pretreated (centrifuged) swine slurry loading rates. This photobioreactor configuration provided simultaneous and efficient carbon, nitrogen, and phosphorous treatment in a single-stage process at sustained nitrogen and phosphorous removals efficiencies ranging from 94% to 100% and 70–90%, respectively. Maximum total organic carbon (TOC), NH₄ ⁺, and PO₄ ³⁻ removal rates of 80 ± 5 g C m_r ⁻³ day⁻¹, 89 ± 5 g N m_r ⁻³ day⁻¹, and 13 ± 3 g P m_r ⁻³ day⁻¹, respectively, were recorded at the highest swine slurry loadings (TOC of 1,247 ± 62 mg L⁻¹, N–NH₄ ⁺ of 656 ± 37 mg L⁻¹, P–PO₄ ³⁺ of 117 ± 19 mg L⁻¹, and 7 days of hydraulic retention time). The unusual substrates diffusional pathways established within the phototrophic biofilm (photosynthetic O₂ and TOC/NH₄ ⁺ diffusing from opposite sides of the biofilm) allowed both the occurrence of a simultaneous denitrification/nitrification process at the highest swine slurry loading rate and the protection of microalgae from any potential inhibitory effect mediated by the combination of high pH and high NH₃ concentrations. In addition, this biofilm-based photobioreactor supported efficient biomass retention (>92% of the biomass generated during the pretreated swine slurry biodegradation).     

The viability to a wall shear stress and propagation of <Emphasis Type="Italic">Bifidobacterium longum</Emphasis> in the intensive membrane bioreactor

Bifidobacterium longum grew at 65 L pilot scale of the membrane bioreactor (MBR), externally fitted with ceramic membrane (0.7 m²). Cell mass at the MBR reached 22.18 g L⁻¹ as dry cell weight in 12 h, which is 8.44 times higher than cell mass attained at the vial culture. The growth rate in the vial culture was μ = 0.385 h⁻ and at the batch culture was μ = 1.13 h⁻ in the exponential period and μ = 0.31 h⁻¹ in the stationary period. In the fed-batch mode was μ = 1.102 h⁻¹ for 6 h with inoculation and declined to μ = 0.456 h⁻¹ with feeding of feed medium. The growth rate at the MBR was μ = 0.134 h⁻¹. The number of viable cells was 6.01 × 10¹² cfu L⁻¹ at the batch culture, but increased to 1.15 × 10¹⁴ cfu L⁻¹ at the MBR culture. The specific growth rate of viable cell number (colony-forming units per liter, per hour) improved by 6.01 times from the batch to the MBR culture. The wall shear stress mainly generated by the pump, and the membrane incorporated into the MBR was controlled during the cultivation at the MBR. The viability of B. longum declined to under 10% in the first 2 weeks of the 4-week stability test (40°C) as B. longum was exposed to over wall shear stress 713 Pa, but the viability improved to 30–40% in wall shear stress of 260 Pa or STR culture. The loss in the cell viability can be saved by managing with wall shear stress during the cultivation at the MBR.     

Effects of ANG II and III and angiotensin receptor blockers on nasal salt gland secretion and arterial blood pressure in conscious Pekin ducks (Anas platyrhynchos)

The vertebrate renin-angiotensin system controls cardiovascular, renal and osmoregulatory functions. Angiotensin II (ANG II) is the most potent hormone of the RAS but in some vertebrate animals angiotensin III (Val⁴-ANG III) may be a hormone. We studied the effects of some angiotensins and mammalian ANG II receptor antagonists on nasal salt gland function and arterial blood pressure in conscious white Pekin ducks. Nasal salt gland fluid secretion (NFS) was induced by a 10 ml · kg⁻¹ bw i.v. injection of a NaCl solution (1000 mosmol · kg⁻¹ H₂O) and maintained by a continuous i.v. infusion of the same solution at a rate of 0.97 ml · min⁻¹. There was a positive linear correlation between nasal fluid [Na⁺] and osmolality, between [Na⁺] and [K⁺], and also between the rate of NFS and [Na⁺] and [K⁺]. [Asp¹,Val⁵]-ANG II (1 nmol · kg⁻¹ i.v.) inhibited NFS but did not change ionic concentrations. Val⁴-ANG III (1 or 5 nmol · kg⁻¹) and ANG I (1-7) (20 nmol · kg⁻¹) had no effect on NFS. [Sar¹, Ile⁸]-ANG II (SARILE) acted as an ANG II receptor agonist and resulted in a prolonged and complete inhibition of NFS. The AT₁ receptor antagonist, losartan (DuP 753) and the AT₂ receptor antagonist, PD 123319 both failed to block the inhibitory effect of [Asp¹, Val⁵]-ANG II on the nasal salt glands. [Asp¹,Val⁵]-ANG II (2 nmol · kg⁻¹ i.v.) increased mean arterial blood pressure (MABP), whereas the same dose of [Asn¹,Val⁵]-ANG II (teleost) had only 30% of the pressor potency of the avian ANG II. Neither 1 nor 5 nmol · kg⁻¹ of Val⁴-ANG III i.v. nor 20 nmol · kg⁻¹ of ANG I (1-7) had any measurable effect on MABP. SARILE blocked completely the pressor response to [Asp¹,Val⁵]-ANG II but the AT₁ antagonists losartan and CGP 48933 and the AT₂ antagonist PD 123319 all failed to block the pressor response to [Asp¹,Val⁵]-ANG II. These results have substantiated an important role of the nasal salt gland in potassium regulation and highlighted a pharmacological dimorphism of saralasin, namely agonist and antagonist to angiotensin II-mediated inhibition of nasal salt gland function and pressor response, respectively. Using specific nonpeptidergic angiotensin II receptor antagonists, we have confirmed the distinct pharmacology of the avian angiotensin II receptors in a nongallinaceous species and the absence of significant angiotensin I (1-7) and angiotensin II effects on the cardiovascular system and nasal salt gland. Accepted: 6 November 1997