Biogeographic variation in skull morphology across the Kra Isthmus in dusky leaf monkeys

Despite the growing literature on the underlying factors of geographical phenotypic variation, little is known about how and to what extent biogeographic barriers in South‐East Asia have shaped morphological variation in primates. We aimed to investigate the geographical variations in skull morphology in dusky leaf monkeys by decomposing them into clinal (latitudinal), non‐clinal spatial (discrete difference between regions north and south of the Isthmus of Kra), and environment‐related components. We applied geometric morphometrics to measure 53 adult male specimens from 36 localities, covering the regions both north and south of the Isthmus of Kra. A linear model was used to test the effects of region (north vs. south of the Isthmus of Kra), latitude, and environmental factors (temperature and rainfall) on the size and shape of skulls. A part of variation in skull shape differed moderately between the regions in the north and south of the Isthmus of Kra, and this difference cannot be explained by latitudinal and environmental factors. However, for size and the majority of variations in shape, we detected limited contributions of region and the two environmental factors. Shape differentiation that was unexplained by latitudinal and environmental factors suggests that dusky leaf monkeys may have experienced a population division due to habitat constriction around the Isthmus of Kra. However, this divergence probably has been obscured by subsequent gene flow between populations after habitat recovery.     

Size variation facilitates population divergence but does not explain it all: an example study from a widespread African monkey

Subspecific variation is widespread in vertebrates. Within Africa, several mammals have extensive geographic distributions with attendant morphological, ecological, and behavioural variations, which are often used to demarcate subspecies. In the present study, we use a primate species, the vervet monkey, Cercopithecus aethiops, as a case study for intraspecific divergence in widespread mammals, assessed through hard tissue morphology. We examine intraspecific differences in size, shape, and non‐allometric shape from a taxonomic perspective, and discuss the macroevolutionary implications of findings from microevolutionary analyses of geographic variation. A geometric morphometric approach was used, employing 86 three‐dimensional landmarks of almost 300 provenanced crania. Many of the taxonomic differences in skull morphology between vervet populations appear to be related to geographic proximity, with subspecies at opposite extremes of a west‐to‐east axis showing greatest divergence, and populations from central and south Africa being somewhat intermediate. The classification rate from discriminant analyses was lower than that observed in other African primate radiations, including guenons as a whole and red colobus. Nonetheless, taxonomic differences in shape were significant and not simply related to either geography or size. Thus, although shifts in size may be an important first step in adaptation and diversification, with size responding more quickly than shape to environmental change, the six vervet taxa currently recognized (either as species or subspecies) are not simply allometrically scaled versions of one another and are probably best viewed as subspecies. Holding allometry constant when examining inter‐population differences in shape may thus help to reveal the early stages of evolutionary divergence. The vervet case study presented here hence has relevance for future studies examining intraspecific differentiation in other large mammals, particularly through the methods used to identify small but biologically meaningful divergence, with attendant implications for conservation planning. © 2010 The Linnean Society of London, Biological Journal of the Linnean Society, 2010, 101 , 823–843.     

Environment and space as drivers of variation in skull shape in two widely distributed South‐American Tayassuidae,Pecari tajacu and Tayassu pecari (Mammalia: Cetartiodactyla)

The influence of the environment on the geographical variation of morphological traits has been recognized in a number of taxa. Pecari tajacu and Tayassu pecari are ideal models to investigate intraspecific geographic variation in skull because of their wide and heterogeneous geographical distribution in South America. We used geometric morphometric procedures to examine the geographical variation in skull shape of 294 adult specimens of these species from 134 localities. We quantified to what extent skull shape variation was explained by environment, skull size and geographical space using variation partitioning analysis. We detected a strong pattern of geographic variation for P. tajacu skull shape, but not for T. pecari. The environment seems to be the major selective force that drives skull shape variation in both species. Nevertheless, other spatially structured processes (e.g. genetic drift, gene flow) might also have affected variation in the skull shape of the more widespread species P. tajacu. Allometric relationships might reflect the biomechanical constraints that are thought to be strong enough to limit size‐related changes in T. pecari skull shape.     

Geographic pattern of cranial differentiation in the Asian Midday Jird Meriones meridianus (Rodentia: Muridae: Gerbillinae) and its taxonomic implications

The existence of cryptic species in the midday jird (Meriones meridianus) has been suggested in literature, although based on little empirical data to support this hypothesis. In this study, a two‐dimensional landmark‐based geometric morphometric approach was used to investigate whether patterns in intraspecific variation in skull shape and size exist, using 110 skull specimens from more than 20 different localities along the distribution range of M. meridianus. This is the first study of morphological differences on such a big sample size and geographical range, and it tries to find whether skull shape variation in this species is best described as being clinal or rather reflecting cryptic diversity. The latter seems to be the case, as a dimorphic skull phenotype was found, reflecting a geographic disparity between the Middle East and the Far East specimens both in shape and in size. Distinct cranial differences were found in the overall cranial size and, also at the level of the inflation of the bulla, the elongation of the nasal, the length of the teeth row and the incisive foramen, as well as the distance in between the latter two. It thus seems that M. meridianus from Middle East is morphologically distinct from that of the Far East. Furthermore, our results also demonstrate that clinal variation could explain variation within Middle East populations, whereas a more heterogenous pattern is found for those of the Far East. The hypothesis that the observed phenotypic variation may reflect cryptic species is discussed, with the recommendation for a thorough taxonomical revision of the genus in the region.     

Allometry and performance: the evolution of skull form and function in felids

Allometric patterns of skull‐shape variation can have significant impacts on cranial mechanics and feeding performance, but have received little attention in previous studies. Here, we examine the impacts of allometric skull‐shape variation on feeding capabilities in the cat family (Felidae) with linear morphometrics and finite element analysis. Our results reveal that relative bite force diminishes slightly with increasing skull size, and that the skulls of the smallest species undergo the least strain during biting. However, larger felids are able to produce greater gapes for a given angle of jaw opening, and they have overall stronger skulls. The two large felids in this study achieved increased cranial strength by increasing skull bone volume relative to surface area. Allometry of skull geometry in large felids reflects a trade‐off between the need to increase gape to access larger prey while maintaining the ability to resist unpredictable loading when taking large, struggling prey.     

The influence of feeding on the evolution of sensory signals: a comparative test of an evolutionary trade‐off between masticatory and sensory functions of skulls in southern African Horseshoe bats (Rhinolophidae)

The skulls of animals have to perform many functions. Optimization for one function may mean another function is less optimized, resulting in evolutionary trade‐offs. Here, we investigate whether a trade‐off exists between the masticatory and sensory functions of animal skulls using echolocating bats as model species. Several species of rhinolophid bats deviate from the allometric relationship between body size and echolocation frequency. Such deviation may be the result of selection for increased bite force, resulting in a decrease in snout length which could in turn lead to higher echolocation frequencies. If so, there should be a positive relationship between bite force and echolocation frequency. We investigated this relationship in several species of southern African rhinolophids using phylogenetically informed analyses of the allometry of their bite force and echolocation frequency and of the three‐dimensional shape of their skulls. As predicted, echolocation frequency was positively correlated with bite force, suggesting that its evolution is influenced by a trade‐off between the masticatory and sensory functions of the skull. In support of this, variation in skull shape was explained by both echolocation frequency (80%) and bite force (20%). Furthermore, it appears that selection has acted on the nasal capsules, which have a frequency‐specific impedance matching function during vocalization. There was a negative correlation between echolocation frequency and capsule volume across species. Optimization of the masticatory function of the skull may have been achieved through changes in the shape of the mandible and associated musculature, elements not considered in this study.     

Sample size and sampling error in geometric morphometric studies of size and shape

Geometric morphometric studies are increasingly becoming common in systematics and palaeontology. The samples in such studies are often small, due to the paucity of material available for analysis. However, very few studies have tried to assess the impact of sampling error on analytical results. Here, this issue is addressed empirically using repeated randomized selection experiments to build progressively smaller samples from an original dataset of ∼400 vervet monkey (Cercopithecus aethiops) skulls. Size and shape parameters (including mean size and shape, size and shape variances, angles of allometric trajectories) that are commonly used in geometric morphometric studies, are estimated first in the original sample and then in the random subsamples. Estimates are then compared to give an indication of what is the minimum desirable sample size for each parameter. Mean size, standard deviation of size and variance of shape are found to be fairly accurate even in relatively small samples. In contrast, mean shapes and angles between static allometric trajectories are strongly affected by sampling error. If confirmed in other groups, our findings may have substantial implications for studies of morphological variation in present and fossil species. By performing rarefaction analyses like those presented in our study, morphometricians can be easily provided with important clues on how a simple but crucial factor like sample size can alter results of their studies.     

Modelling spatial and environmental effects at the edge of the distribution: the red-backed shrike Lanius collurio in Northern Portugal

This study examined the interplay of spatial and environmental effects shaping the range margin of the red‐backed shrike (Lanius collurio) in northern Portugal. The occurrence of shrikes in 10 × 10 km UTM squares was related to three sets of explanatory variables, reflecting environmental effects (climate and habitat), large‐scale spatial trends, and neighbourhood influences (considering an autologistic term); spatial variables were used as surrogates for historical and demographic factors. Multiple logistic regression models were built for each set, and then variation partitioning based on partial regressions isolated the unique and shared components of explained variation. The environmental model revealed a dominant influence of climate effects, with the occurrence of shrikes increasing with frost and thermal amplitude, declining with insolation, and responding unimodally to rainfall. There was a weaker influence of habitat conditions, though shrikes were more likely with increasing cover by annual crops and pastures, and decreasing forest cover. Only a relatively small proportion of explained variation was due to a ‘pure’ environmental component (10.4%), as most variation explained by environmental factors appeared spatially structured (51.9%). The unique contributions of spatial variables to the overall model were also small, though the neighbourhood effects appeared relatively stronger than large‐scale trends. Taken together, results suggested that the south‐western range margin of the red‐backed shrike was largely determined by spatially structured environmental factors. Nevertheless, there were also ‘pure’ environmental factors determining some isolate occurrences irrespective of any spatial structure, and ‘pure’ spatial factors that appeared to favour the occupation of squares surrounding the core distribution areas irrespective of environmental conditions. These results add to the growing evidence that both environmental and spatial factors need to be considered in predictive modelling of species range margins.     

East Greenland and Barents Sea polar bears (Ursus maritimus): adaptive variation between two populations using skull morphometrics as an indicator of environmental and genetic differences

A morphometric study was conducted on four skull traits of 37 male and 18 female adult East Greenland polar bears (Ursus maritimus) collected 1892-1968, and on 54 male and 44 female adult Barents Sea polar bears collected 1950-1969. The aim was to compare differences in size and shape of the bear skulls using a multivariate approach, characterizing the variation between the two populations using morphometric traits as an indicator of environmental and genetic differences. Mixture analysis testing for geographic differentiation within each population revealed three clusters for Barents Sea males and three clusters for Barents Sea females. East Greenland consisted of one female and one male cluster. A principal component analysis (PCA) conducted on the clusters defined by the mixture analysis, showed that East Greenland and Barents Sea polar bear populations overlapped to a large degree, especially with regards to females. Multivariate analyses of variance (MANOVA) showed no significant differences in morphometric means between the two populations, but differences were detected between clusters from each respective geographic locality. To estimate the importance of genetics and environment in the morphometric differences between the bears, a PCA was performed on the covariance matrix derived from the skull measurements. Skull trait size (PC1) explained approx. 80% of the morphometric variation, whereas shape (PC2) defined approx. 15%, indicating some genetic differentiation. Hence, both environmental and genetic factors seem to have contributed to the observed skull differences between the two populations. Overall, results indicate that many Barents Sea polar bears are morphometrically similar to the East Greenland ones, suggesting an exchange of individuals between the two populations. Furthermore, a subpopulation structure in the Barents Sea population was also indicated from the present analyses, which should be considered with regards to future management decisions.     

Phylogenetic and environmental components of morphological variation: skull, mandible, and molar shape in marmots (Marmota, Rodentia)

The phenotype is a product of its phylogenetic history and its recent adaptation to local environments, but the relative importance of the two factors is controversial. We assessed the effects of diet, habitat, elevation, temperature, precipitation, body size, and mtDNA genetic divergence on shape variation in skulls, mandibles, and molars, structures that differ in their genetic and functional control. We asked whether these structures have adapted to environment to the same extent and whether they retain the same amount of phylogenetic signal. We studied these traits in intra- and interspecific populations of Eurasian marmots whose last common ancestor lived 2-5 million years ago. Path Analysis revealed that body size explained 10% of variation in skulls, 7% in mandibles, and 15% in molars. Local vegetation explained 7% of variation in skulls, 11% in mandibles, and 12% in molars. Dietary category explained 25% of variation in skulls, 11% in mandibles, and 9% in molars. Cyt b mtDNA divergence (phylogeny) explained 15% of variation in skulls, 7% in mandibles, and 5% in molars. Despite the percentages of phylogenetic variance, maximum-likelihood trees based on molar and skull shape recovered most phylogenetic groupings correctly, but mandible shape did not. The good performance of molars and skulls was probably due to different factors. Skulls are genetically and functionally more complicated than teeth, and they had more mathematically independent components of variation (5-6-in skulls compared to 3-in molars). The high proportion of diet-related variance was not enough to mask the phylogenetic signal. Molars had fewer independent components, but they also have less ecophenotypic variation and evolve more slowly, giving each component a proportionally stronger phylogenetic signal. Molars require larger samples for each operational taxonomic unit than the other structures because the proportion of within-taxon to between-taxon variation was higher. Good phylogenetic signal in quantitative skeletal morphology is likely to be found only when the taxa have a common ancestry no older than hundreds of thousands or millions of years (1% to 10% mtDNA divergence)--under these conditions skulls and molars provide stronger signal than mandibles.     

Trait independence primes convergent trait loss

The repeated, independent evolution of traits (convergent evolution) is often attributed to shared environmental selection pressures. However, developmental dependencies among traits can limit the phenotypic variation available to selection and bias evolutionary outcomes. Here, we determine how changes in developmentally correlated traits may impact convergent loss of the tympanic middle ear, a highly labile trait within toads that currently lack adaptive explanation. The middle ear's lability could reflect evolutionary trade‐offs with other skull features under selection, or the middle ear may evolve independently of the rest of the skull, allowing it to be modified by active or passive processes without pleiotropic trade‐offs with other skull features. We compare the skulls of 55 species (39 eared, 16 earless) within the family Bufonidae, spanning six hypothesized independent middle ear transitions. We test whether shared or lineage‐specific changes in skull shape distinguish earless species from eared species and whether earless skulls lack other late‐forming skull bones. We find no evidence for pleiotropic trade‐offs between the middle ear and other skull structures. Instead, middle ear loss in anurans may provide a rare example of developmental independence contributing to evolutionary lability of a sensory system.     

Intraspecific variation in the skull morphology of the black caiman Melanosuchus niger (Alligatoridae,Caimaninae)

Melanosuchus niger is a caimanine alligatorid widely distributed in the northern region of South America. This species has been the focus of several ecological, genetic and morphological studies. However, morphological studies have generally been limited to examination of interspecific variation among extant species of South American crocodylians. Here, we present the first study of intraspecific variation in the skull of M. niger using a two‐dimensional geometric morphometric approach. The crania of 52 sexed individuals varying in size were analysed to quantify shape variation and to assign observed shape changes to different types of intraspecific variation, that is, ontogenetic variation and sexual dimorphism. Most of the variation in this species is ontogenetic variation in snout length, skull depth, orbit size and the width of the postorbital region. These changes are correlated with bite force performance and probably dietary changes. However, a comparison with previous functional studies reveals that functional adaptations during ontogeny seem to be primarily restricted to the postrostral region, whereas rostral shape changes are more related to dietary shifts. Furthermore, the skulls of M. niger exhibit a sexual dimorphism, which is primarily size‐related. The presence of non‐size‐related sexual dimorphism has to be tested in future examinations.     

Cranial capacity/cranial base relationships and prediction of vault form: A canonical correlation analysis

Canonical correlation analysis was used to test an hypothesized morphological relationship between vault form and cranial capacity relative to length of the chondrocranium. Ninety-five adult male Czech skulls were measured for vault form expressed as length, width and height of the brain case; the chondrocranium was represented by nasion-basion and basion-opisthion lengths. In terms of explained variation, the first and most important dimension of covariation between vault and chondrocranial variables was size. The second most significant dimension of covariation expressed the hypothesized shape relationships—i.e., overall size being equal, the shorter the chondrocranial base relative to cranial capacity, the shorter and wider the vault. Furthermore, the competing hypothesis that vault form is determined by facial length proved untenable since facial length was predictive of vault shape only when measured as prosthion-basion, a measure that incorporates basal length. When corrected for basal length, facial length is unrelated to vault form. The results are consistent with the assumption that phylogenetic and microevolutionary trends toward brachycephaly in man stem from changes in the relationship between two components of skull growth, the chondrocranial base and the brain.     

Ontogenetic and sexual patterns in the cranial system of the brown rat (Rattus norvegicus Berkenhout, 1769) from Hai’l region,Kingdom of Saudi Arabia

The brown rat, Rattus norvegicus, is a model system in ecological and systematic science, but little is known about its skull morphology and developmental patterns. Our objective was to investigate the cranial ontogenetic patterns in the brown rats, from Hai’l, Kingdom of Saudi Arabia.Quantitative analysis of sexual shape dimorphisms (SShD) and age-classes were investigated using 28 landmarks plotted on two-dimensional images for dorsal and ventral views. Our results detected statistically significant sexual dimorphism (P-value <0.0001) in cranial shape and size for R. norvegicus. Nevertheless, males are much larger than females and display variation around the brain-case, while females tend to show greater variation around the occipital bone. In addition, there are subtle age-classes during ontogeny in the skull. However, the older age classes (i.e. age classes 3 and 4) represent well-built crania with an extended case of the brain and shortest nasal, while youngest specimens represent an elongated snout of minimum crania.Future GMM research should therefore examine the pre-defined age-classes and sex-related individuals in brown rat skulls in relation to genotype to characterize trends in skull shape variation that may affect teeth, zygomatic arches, brain case, and compartments of muscle attachments through its ecological patterns.     

The influence of niche and neutral processes on a neotropical anuran metacommunity

One of the most important questions in ecology is the relative importance of local conditions (niche processes) and dispersal ability (neutral processes) in driving metacommunity structure. Although many studies have been conducted in recent years, there is still much debate. We evaluated the processes (niche and neutral) responsible for variation in anuran composition in 28 lentic water bodies in southeastern Brazil. Because anurans depend heavily on environmental conditions, we hypothesized that environmental variables (niche processes) are the most important drivers of community composition. Additionally, as anurans have limited dispersal abilities, and the study region presents harsh conditions (high forest fragmentation, low rainfall and long dry season), we expected a lower, but significant, spatial signature in metacommunity structure, due to neutral dynamics. We used a partial redundancy analysis with variation partitioning to evaluate the relative influence of environmental and spatial variables as drivers of metacommunity structure. Additionally, we used a recently developed spatial autocorrelation analysis to test if neutral dynamics can be attributed to the pure spatial component. This analysis is based on predictions that species abundances are independent but similarly spatially structured, with correlograms similar in shape. Therefore, under neutral dynamics there is no expectation of a correlation between the pairwise distance of spatial correlograms and the pairwise correlation of species abundances predicted by the pure spatial component. We found that the environmental component explained 21.5%, the spatial component 10.2%, and the shared component 6.4% of the metacommunity structure. We found no correlation between correlograms and correlation of abundances predicted by the pure spatial component (Mantel test = ?0.109, P = 0.961). In our study, niche‐based processes are the dominant process that explained community composition. However, neutral processes are important because spatial variation can be attributed to pure neutral dynamics rather than to missing spatially structured environmental factors.     

Contrasting patterns of divergence in quantitative traits and neutral DNA markers: analysis of clinal variation

Clinal variation in quantitative traits is often attributed to the effects of spatially varying selection. However, identical patterns can be produced by the interplay between purely stochastic processes (i.e. drift in combination with spatially restricted gene flow). One means of distinguishing between adaptive and nonadaptive causes of geographical variation is to compare relative levels of between-population divergence in quantitative traits and neutral DNA markers. Such comparisons can be used to test whether levels of trait divergence attributable to additive genetic effects (as measured by QST) exceed null expectations based on the level of divergence at neutral marker loci (as measured by FST). The purpose of this study was to use an approach based on 'QST vs. FST' contrasts to test for evidence of diversifying selection on body size of an Indian fruit bat, Cynopterus sphinx (Chiroptera: Pteropodidae). Specifically, relative levels of between-population divergence in body size and microsatellite DNA markers were compared to assess whether the observed pattern of clinal size variation could be explained by a neutral model of isolation by distance. QST for body size was calculated using unbiased estimators of within- and between-population variance of principal component scores. The association between body size variation and geographical/environmental distance was tested using pairwise and partial matrix correspondence tests (MCTs). Independent variables (representing causal hypotheses) were constructed as between-locality distance matrices. The effects of neutral genetic divergence were assessed by including a matrix of pairwise FST as an independent variable. Partial MCTs revealed highly significant associations between phenotypic divergence (QST) and both geographical and environmental distance, even when the effects of neutral genetic divergence (FST) were partialled out. Results of the tests confirmed that migration-drift equilibrium is not a sufficient explanation for the latitudinal pattern of clinal size variation in C. sphinx. The geographical patterning of pairwise QST is most likely attributable to spatially varying selection and/or the direct influence of latitudinally ordered environmental effects.     

ALTITUDINAL CLINAL VARIATION IN WING SIZE AND SHAPE IN AFRICAN DROSOPHILA MELANOGASTER: ONE CLINE OR MANY?

Geographical patterns of morphological variation have been useful in addressing hypotheses about environmental adaptation. In particular, latitudinal clines in phenotypes have been studied in a number of Drosophila species. Some environmental conditions along latitudinal clines—for example, temperature—also vary along altitudinal clines, but these have been studied infrequently and it remains unclear whether these environmental factors are similar enough for convergence or parallel evolution. Most clinal studies in Drosophila have dealt exclusively with univariate phenotypes, allowing for the detection of clinal relationships, but not for estimating the directions of covariation between them. We measured variation in wing shape and size in D. melanogaster derived from populations at varying altitudes and latitudes across sub‐Saharan Africa. Geometric morphometrics allows us to compare shape changes associated with latitude and altitude, and manipulating rearing temperature allows us to quantify the extent to which thermal plasticity recapitulates clinal effects. Comparing effect vectors demonstrates that altitude, latitude, and temperature are only partly associated, and that the altitudinal shape effect may differ between Eastern and Western Africa. Our results suggest that selection responsible for these phenotypic clines may be more complex than just thermal adaptation.     

Biodiversity of stream insects in the Malaysian Peninsula: spatial patterns and environmental constraints

相似文献