Application of gel-phase 19F NMR spectroscopy for optimization of solid-phase synthesis of a hydrophobic peptide from the signal sequence of the mucin MUC1.

This paper describes the manual Fmoc/t-Bu solid-phase synthesis of a difficult nine-residue hydrophobic peptide LLLLTVLTV from one of the signal sequences that flank the tandem repeat of the mucin MUC1. Gel-phase 19F NMR spectroscopy was used as a straightforward method for optimization of the solid-phase synthesis. Different approaches were applied for comparative studies. The strategy based on modified solid-phase conditions using DIC/HOAt for coupling, DBU for Fmoc deprotection, and the incorporation of the pseudo proline dipeptide Fmoc-Leu-Thr(psiMe, Me pro)-OH as a backbone-protecting group was found to be superior according to gel-phase 19F NMR spectroscopy. Implementation of the optimized Fmoc protocol enabled an effective synthesis of signal peptide LLLLTVLTV.     

A general method for preparation of N‐Boc‐protected or N‐Fmoc‐protected α,β‐didehydropeptide building blocks and their use in the solid‐phase peptide synthesis

N‐(tert‐butyloxycarbonyl) or N‐(9‐fluorenylmethoxycarbonyl) dipeptides with C‐terminal (Z)‐α,β‐didehydrophenylalanine (?^ZPhe), (Z)‐α,β‐didehydrotyrosine (?^ZTyr), (Z)‐α,β‐didehydrotryptophan (?^ZTrp), (Z)‐α,β‐didehydromethionine (?^ZMet), (Z)‐α,β‐didehydroleucine (?^ZLeu), and (Z/E)‐α,β‐didehydroisoleucine (?^Z/EIle) were synthesised from their saturated analogues via oxidation of intermediate 2,5‐disubstituted‐oxazol‐5‐(4H)‐ones (also known as azlactones) with pyridinium tribromide followed by opening of the produced unsaturated oxazol‐5‐(4H)‐one derivatives in organic‐aqueous solution with a catalytic amount of trifluoroacetic acid or by a basic hydrolysis. In all cases, a very strong preference for Z isomers of α,β‐didehydro‐α‐amino acid residues was observed except of the ΔIle, which was obtained as the equimolar mixture of Z and E isomers. Reasons for the (Z)‐stereoselectivity and the increased stability of the aromatic α,β‐didehydro‐α‐amino acid residue oxazol‐5‐(4H)‐ones over the corresponding aliphatic ones are also discussed. It is the first use of such a procedure to synthesise peptides with the C‐terminal unsaturated residues and a peptide with 2 consecutive ΔPhe residues. This approach is very effective especially in the synthesis of peptides with aliphatic α,β‐didehydro‐α‐amino acid residues that are difficult to obtain by other methods. It allowed the first synthesis of the ?Met residue. It is also more cost‐effective and less laborious than other synthesis protocols. The dipeptide building blocks obtained were used in the solid‐phase synthesis of model peptides on a polystyrene‐based solid support. Peptides containing aromatic α,β‐didehydro‐α‐amino acid residues were obtained with PyBOP or TBTU as a coupling agent with good yields and purities. In the case of aliphatic α,β‐didehydro‐α‐amino acid residues, a good efficiency was achieved only with DPPA as a coupling agent.     

A convenient microwave‐enhanced solid‐phase synthesis of short chain N‐methyl‐rich peptides

Structural modification of the peptide backbone via N‐methylation is a powerful tool to modulate the pharmacokinetic profile and biological activity of peptides. Here we describe a rapid and highly efficient microwave(MW)‐assisted Fmoc/tBu solid‐phase method to prepare short chain N‐methyl‐rich peptides, using Rink amide p‐methylbenzhydrylamine (MBHA) resin as solid‐phase support. This method produces peptides in high yield and purity, and reduces the time required for Fmoc‐N‐methyl amino acid coupling. Copyright © 2010 European Peptide Society and John Wiley & Sons, Ltd.     

Synthesis and application of Nα‐Fmoc‐Nπ‐4‐methoxybenzyloxymethylhistidine in solid phase peptide synthesis

The 4‐methoxybenzyloxymethyl (MBom) group was introduced at the N^π‐position of the histidine (His) residue by using a regioselective procedure, and its utility was examined under standard conditions used for the conventional and the microwave (MW)‐assisted solid phase peptide synthesis (SPPS) with 9‐fluorenylmethyoxycarbonyl (Fmoc) chemistry. The N^π‐MBom group fulfilling the requirements for the Fmoc strategy was found to prevent side‐chain‐induced racemization during incorporation of the His residue even in the case of MW‐assisted SPPS performed at a high temperature. In particular, the MBom group proved to be a suitable protecting group for the convergent synthesis because it remains attached to the imidazole ring during detachment of the protected His‐containing peptide segments from acid‐sensitive linkers by treatment with a weak acid such as 1% trifluoroacetic acid in dichloromethane. We also demonstrated the facile synthesis of Fmoc‐His(π‐MBom)‐OH with the aid of purification procedure by crystallization to effectively remove the undesired τ‐isomer without resorting to silica gel column chromatography. This means that the present synthetic procedure can be used for large‐scale production without any obstacles. Copyright © 2012 European Peptide Society and John Wiley & Sons, Ltd.     

β‐Amino acids containing peptides and click‐cyclized peptide as β‐turn mimics: a comparative study with ‘conventional’ lactam‐ and disulfide‐bridged hexapeptides

The increasing interest in click chemistry and its use to stabilize turn structures led us to compare the propensity for β‐turn stabilization of different analogs designed as mimics of the β‐turn structure found in tendamistat. The β‐turn conformation of linear β‐amino acid‐containing peptides and triazole‐cyclized analogs were compared to ‘conventional’ lactam‐ and disulfide‐bridged hexapeptide analogs. Their 3D structures and their propensity to fold in β‐turns in solution, and for those not structured in solution in the presence of α‐amylase, were analyzed by NMR spectroscopy and by restrained molecular dynamics with energy minimization. The linear tetrapeptide Ac‐Ser‐Trp‐Arg‐Tyr‐NH₂ and both the amide bond‐cyclized, c[Pro‐Ser‐Trp‐Arg‐Tyr‐D ‐Ala] and the disulfide‐bridged, Ac‐c[Cys‐Ser‐Trp‐Arg‐Tyr‐Cys]‐NH₂ hexapeptides adopt dominantly in solution a β‐turn conformation closely related to the one observed in tendamistat. On the contrary, the β‐amino acid‐containing peptides such as Ac‐(R)‐β³‐hSer‐(S)‐Trp‐(S)‐β³‐hArg‐(S)‐β³‐hTyr‐NH₂, and the triazole cyclic peptide, c[Lys‐Ser‐Trp‐Arg‐Tyr‐βtA]‐NH₂, both specifically designed to mimic this β‐turn, do not adopt stable structures in solution and do not show any characteristics of β‐turn conformation. However, these unstructured peptides specifically interact in the active site of α‐amylase, as shown by TrNOESY and saturation transfer difference NMR experiments performed in the presence of the enzyme, and are displaced by acarbose, a specific α‐amylase inhibitor. Thus, in contrast to amide‐cyclized or disulfide‐bridged hexapeptides, β‐amino acid‐containing peptides and click‐cyclized peptides may not be regarded as β‐turn stabilizers, but can be considered as potential β‐turn inducers. Copyright © 2011 European Peptide Society and John Wiley & Sons, Ltd.     

Examination of the active secondary structure of the peptide 101.10, an allosteric modulator of the interleukin‐1 receptor,by positional scanning using β‐amino γ‐lactams

The relationship between the conformation and biological activity of the peptide allosteric modulator of the interleukin‐1 receptor 101.10 (D ‐Arg‐D ‐Tyr‐D ‐Thr‐D ‐Val‐D ‐Glu‐D ‐Leu‐D ‐Ala‐NH₂) has been studied using (R)‐ and (S)‐Bgl residues. Twelve Bgl peptides were synthesized using (R)‐ and (S)‐cyclic sulfamidate reagents derived from L ‐ and D ‐aspartic acid in an optimized Fmoc‐compatible protocol for efficient lactam installment onto the supported peptide resin. Examination of these (R)‐ and (S)‐Bgl 101.10 analogs for their potential to inhibit IL‐1β‐induced thymocyte cell proliferation using a novel fluorescence assay revealed that certain analogs exhibited retained and improved potency relative to the parent peptide 101.10. In light of previous reports that Bgl residues may stabilize type II′β‐turn‐like conformations in peptides, CD spectroscopy was performed on selected compounds to identify secondary structure necessary for peptide biological activity. Results indicate that the presence of a fold about the central residues of the parent peptide may be important for activity. Copyright © 2011 European Peptide Society and John Wiley & Sons, Ltd.     

Synthesis and receptor binding of opioid peptide analogues containing β3‐homo‐amino acids

β‐Amino acids containing hybrid peptides and β‐peptides show great potential as peptidomimetics. In this paper we describe the synthesis and affinity toward the µ‐ and δ‐opioid receptors of β‐peptides, analogues of Leu‐enkephalin, deltorphin I, dermorphin and α,β‐hybrides, analogues of deltorphin I. Substitution of α‐amino acid residues with β³‐homo‐amino acid residues, in general resulted in decrease of affinity to opioid receptors. However, the incorporation β³h‐D ‐Ala in position 2 or β³hPhe in position 3 of deltorphin I resulted in potent and selective ligand for δ‐opioid receptor. The NMR studies of β‐deltorphin I analogue suggest that conformational motions in the central part of the peptide backbone are partially restricted and some conformational preferences can be expected. Copyright © 2009 European Peptide Society and John Wiley & Sons, Ltd.     

Microwave‐assisted solid‐phase peptide synthesis of neurosecretory protein GL composed of 80 amino acid residues

We recently identified a novel cDNA encoding a small secretory protein of 80 amino acid residues, termed neurosecretory protein GL (NPGL), from the chicken hypothalamus. Homologs of NPGL have been reported to be present in mammals, such as human and rat. NPGL is amidated at its C‐terminus, contains an intramolecular disulfide bond, and is hydrophobic in nature. In this study, we have optimized the synthesis of the entire 80‐amino acid peptide sequence of rat NPGL by microwave‐assisted solid‐phase peptide synthesis. NPGL was obtained with a 10% yield when the coupling reactions were performed using 1‐[Bis(dimethylamino)methylene]‐1H‐1,2,3‐triazolo[4,5‐b]pyridinium‐3‐oxid hexafluorophosphate (HATU) at 50 °C for 5 min, and Fmoc deprotections were performed using 40% piperidine containing 0.1 M HOBt. Furthermore, the disulfide bond of NPGL was formed with 20% yield with the use of glutathione‐containing redox buffer and 50% acetonitrile. Copyright © 2015 European Peptide Society and John Wiley & Sons, Ltd.     

BOP‐OXy,BOP‐OBt,and BOP‐OAt: novel organophosphinic coupling reagents useful for solution and solid‐phase peptide synthesis

Stand‐alone coupling reagents derived from bis(2‐oxo‐3‐oxazolidinyl)phosphorodiamidic chloride show efficient performance in solution and SPPS. In particular, the Oxyma Pure (Luxembourg Biotech., Tel Aviv, Israel) derivative shows the additional advantage of being highly soluble in DMF and even fairly soluble in CH₃CN, which can extend its use for the synthesis of complex peptides. These new stand‐alone coupling reagents have the advantage of not bearing any counteranion such as PF₆ or BH₄, whose presence can jeopardize the purification of final peptides prepared in solution. Copyright © 2013 European Peptide Society and John Wiley & Sons, Ltd.     

Lewis acid catalysed methylation of N‐(9H‐fluoren‐9‐yl)methanesulfonyl (Fms) protected lipophilic α‐amino acid methyl esters

This work reports an efficient Lewis acid catalysed N‐methylation procedure of lipophilic α‐amino acid methyl esters in solution phase. The developed methodology involves the use of the reagent system AlCl₃/diazomethane as methylating agent and α‐amino acid methyl esters protected on the amino function with the (9H‐fluoren‐9‐yl)methanesulfonyl (Fms) group. The removal of Fms protecting group is achieved under the same conditions to those used for Fmoc removal. Thus the Fms group can be interchangeable with the Fmoc group in the synthesis of N‐methylated peptides using standard Fmoc‐based strategies. Finally, the absence of racemization during the methylation reaction and the removal of Fms group were demonstrated by synthesising a pair of diastereomeric dipeptides. Copyright © 2015 European Peptide Society and John Wiley & Sons, Ltd.     

Vibrational circular dichroism as a probe of solid‐state organisation of derivatives of cyclic β‐amino acids: Cis‐ and trans‐2‐aminocyclobutane‐1‐carboxylic acid

Peptide models built from cis‐ and trans‐2‐aminocyclobutane‐1‐carboxylic acids (ACBCs) are studied in the solid phase by combining Fourier‐transform infrared spectroscopy (FTIR) absorption spectroscopy, vibrational circular dichroism (VCD), and quantum chemical calculations using density functional theory (DFT). The studied systems are N‐tert‐butyloxycarbonyl (Boc) derivatives of 2‐aminocyclobutanecarboxylic acid (ACBC) benzylamides, namely Boc?(cis‐ACBC)?NH?Bn and Boc?(trans‐ACBC)?NH?Bn. These two diastereomers show very different VCD signatures and intensities, which of the trans‐ACBC derivative being one order of magnitude larger in the region of the ν (CO) stretch. The spectral signature of the cis‐ACBC derivative is satisfactorily reproduced by that of the monomer extracted from the solid‐state geometry of related ACBC derivatives, which shows that no long‐range effects are implicated for this system. In terms of hydrogen bonds, the geometry of this monomer is intermediate between the C6 and C8 structures (exhibiting a 6‐ or 8‐membered cyclic NH?O hydrogen bond) previously evidenced in the gas phase. The benzyl group must be in an extended geometry to reproduce satisfactorily the shape of the VCD spectrum in the ν (CO) range, which qualifies VCD as a potential probe of dispersion interaction. In contrast, reproducing the IR and VCD spectrum of the trans‐ACBC derivative requires clusters larger than four units, exhibiting strong intermolecular H‐bonding patterns. A qualitative agreement is obtained for a tetramer, although the intensity enhancement is not reproduced. These results underline the sensitivity of VCD to the long‐range organisation in the crystal.     

Enantiodifferentiation of α‐hydroxyalkanephosphonic acids in 31P NMR with application of α‐cyclodextrin as chiral discriminating agent

α‐Cyclodextrin was shown to be convenient chemical shift reagent for determination of the enantiomeric composition of α‐hydroxyphosphonic acids by means of ³¹P NMR. The developed methodology appeared to be reliable, repetitive, easy to perform and simple for interpretation. Enantiomeric discrimination in the ³¹P NMR spectra for 12 of 13 studied hydroxyphosphonates was achieved, with baseline separation of resonances obtained for eight compounds. In those cases, the chemical nonequivalence values ranged from 0.069 to 0.313 ppm. The studies showed that enantioselectivity is strongly influenced by the solution pD and the optimal condition was found at pD 2 or 10 depending on the guest structure. On the basis of the ROESY spectra the complexation modes of selected hydroxyphosphonates with α‐cyclodextrin was postulated. Chirality 2010. © 2009 Wiley‐Liss, Inc.     

TAPP analogs containing β3‐homo‐amino acids: synthesis and receptor binding

β‐Amino acids containing α,β‐hybrid peptides show great potential as peptidomimetics. In this paper, we describe the synthesis and affinity to μ‐opioid and δ‐opioid receptors of α,β‐hybrids, analogs of the tetrapeptide Tyr‐ d ‐Ala‐Phe‐Phe‐NH₂ (TAPP). Each amino acid was replaced with an l ‐ or d ‐β³‐h‐amino acid. All α,β‐hybrids of TAPP analogs were synthesized in solution and tested for affinity to μ‐opioid and δ‐opioid receptors. The analog Tyr‐β³h‐ d ‐Ala‐Phe‐PheNH₂ was found to be as active as the native tetrapeptide. Copyright © 2012 European Peptide Society and John Wiley & Sons, Ltd.     

Efficient synthesis of polypeptide‐α‐thioester by the method combining polypeptide expression and chemical activation for the semi‐synthesis of interferon‐γ having oligosaccharides

In order to synthesize interferon‐γ glycoform having an oligosaccharide at the 97 position by a semi‐synthetic method, interferon‐γ‐polypeptide‐(1–94)‐α‐hydrazide was prepared by the specific Cys‐cyanylation of polypeptide‐(1–94)‐Cys‐His₆ expressed from E. coli and subsequent hydrazinolysis in 22% yield (two steps). This polypeptide‐α‐hydrazide was then converted into corresponding polypeptide‐α‐thioester under NaNO₂/acid conditions followed by thiolysis in 83% yield. Copyright © 2014 European Peptide Society and John Wiley & Sons, Ltd.     

Synthesis and reactivity of N‐protected‐α‐amino aldehydes

During the last decade α‐amino aldehydes have attracted widespread attention as the important natural source of chiral substrates useful in stereocontrolled organic synthesis. They are of special interest due to their ready availability in both enantiomeric forms from natural sources, as well as their pronounced versatility, due to the presence of both the formyl group and suitably protected amino functionality in the molecule. These bifunctional compounds exhibit a valuable dual reactivity, which has been utilized in a broad range of synthetic applications. Chirality 15:514–541, 2003. © 2003 Wiley‐Liss, Inc.     

Evaluation of acid‐labile S‐protecting groups to prevent Cys racemization in Fmoc solid‐phase peptide synthesis

Phosphonium and uronium salt‐based reagents enable efficient and effective coupling reactions and are indispensable in peptide chemistry, especially in machine‐assisted SPPS. However, after the activating and coupling steps with these reagents in the presence of tertiary amines, Fmoc derivatives of Cys are known to be considerably racemized during their incorporation. To avoid this side reaction, a coupling method mediated by phosphonium/uronium reagents with a weaker base, such as 2,4,6‐trimethylpyridine, than the ordinarily used DIEA or that by carbodiimide has been recommended. However, these methods are appreciably inferior to the standard protocol applied for SPPS, that is, a 1 min preactivation procedure of coupling with phosphonium or uronium reagents/DIEA in DMF, in terms of coupling efficiency, and also the former method cannot reduce racemization of Cys(Trt) to an acceptable level (<1.0%) even when the preactivation procedure is omitted. Here, the 4,4′‐dimethoxydiphenylmethyl and 4‐methoxybenzyloxymethyl groups were demonstrated to be acid‐labile S‐protecting groups that can suppress racemization of Cys to an acceptable level (<1.0%) when the respective Fmoc derivatives are incorporated via the standard SPPS protocol of phosphonium or uronium reagents with the aid of DIEA in DMF. Furthermore, these protecting groups significantly reduced the rate of racemization compared to the Trt group even in the case of microwave‐assisted SPPS performed at a high temperature. © 2013 The Authors. European Peptide Society published by John Wiley & Sons, Ltd.     

Molecular design and optimization of hepatic cancer SLP76‐derived PLCγ1 SH3‐binding peptide with the systematic N‐substitution of peptide PXXP motif

The phospholipase Cγ1 (PLCγ1) is essential for T‐cell signaling and activation in hepatic cancer immune response, which has a regulatory Src homology 3 (SH3) domain that can specifically recognize and interact with the PXXP‐containing decapeptide segment (¹⁸⁵QP P VP P QRPM¹⁹⁴, termed as SLP76^185–194 peptide) of adaptor protein SLP76 following T‐cell receptor ligation. The isolated peptide can only bind to the PLCγ1 SH3 domain with a moderate affinity due to lack of protein context support. Instead of the traditional natural residue mutagenesis that is limited by low structural diversity and shifted target specificity, we herein attempt to improve the peptide affinity by replacing the two key proline residues Pro187 and Pro190 of SLP76^185–194 PXXP motif with nonnatural N‐substituted amino acids, as the proline is the only endogenous N‐substituted amino acid. The replacement would increase peptide flexibility but can restore peptide activity by establishing additional interactions with the domain. Structural analysis reveals that the domain pocket can be divided into a large amphipathic region and a small negatively charged region; they accommodate hydrophobic, aromatic, polar, and moderate‐sized N‐substituted amino acid types. A systematic replacement combination profile between the peptide residues Pro187 and Pro190 is created by structural modeling, dynamics simulation, and energetics analysis, from which six improved and two reduced N‐substituted peptides as well as native SLP76^185–194 peptide are identified and tested for their binding affinity to the recombinant protein of the human PLCγ1 SH3 domain using fluorescence‐based assays. Two N‐substituted peptides, SLP76^185–194(N‐Leu187/N‐Gln190) and SLP76^185–194(N‐Thr187/N‐Gln190), are designed to have high potency (K_d = 0.67 ± 0.18 and 1.7 ± 0.3 μM, respectively), with affinity improvement by, respectively, 8.5‐fold and 3.4‐fold relative to native peptide (K_d = 5.7 ± 1.2 μM).     

Utilization of (18‐Crown‐6)‐2,3,11,12‐tetracarboxylic Acid as a Chiral NMR Solvating Agent for Diamines and β‐Amino Acids

The compound (18‐crown‐6)‐2,3,11,12‐tetracarboxylic acid was evaluated as a chiral nuclear magnetic resonance (NMR) solvating agent for a series of diamines and bicyclic β‐amino acids. The amine must be protonated for strong association with the crown ether. An advantage of (18‐crown‐6)‐2,3,11,12‐tetracarboxylic acid over many other crown ethers is that it undergoes a neutralization reaction with neutral amines to form the protonated species needed for binding. Twelve primary diamines in neutral and protonated forms were evaluated. Diamines with aryl and aliphatic groups were examined. Some are atropisomers with equivalent amine groups. Others have two nonequivalent amine groups. Association equilibria for these systems are complex, given the potential formation of 2:1, 1:1, and 1:2 crown‐amine complexes and given the various charged species in solution for mixtures of the crown ether with the neutral amine. The crown ether produced enantiomeric differentiation in the ¹H NMR spectrum of one or more resonances for every diamine substrate. Also, a series of five bicyclic β‐amino acids were examined and (18‐crown‐6)‐2,3,11,12‐tetracarboxylic acid caused enantiomeric differentiation in the ¹H NMR spectrum of three or more resonances of each compound. Chirality 27:708–715, 2015. © 2015 Wiley Periodicals, Inc.     

Chiral Recognition of N‐Phthaloyl,N‐Tetrachlorophthaloyl,and N‐Naphthaloyl α‐Amino Acids and Their Esters on Polysaccharide‐Derived Chiral Stationary Phases

Enantiomeric separations of N‐phthaloyl (N‐PHT), N‐tetrachlorophthaloyl (N‐TCPHT), and N‐naphthaloyl (N‐NPHT) α‐amino acids and their esters were examined on several kinds of polysaccharide‐derived chiral stationary phases (CSPs). Resolution capability of CSPs was greater Chiralcel OF than the others for N‐PHT and N‐NPHT α‐amino acids and their esters. In N‐TCPHT α‐amino acids and their esters, good enantioselectivities showed Chiralcel OG for N‐TCPHT α‐amino acids, Chiralpak AD for N‐TCPHT α‐amino acid methyl esters, and Chiralcel OD for N‐TCPHT α‐amino acid ethyl esters, respectively. From the results of liquid chromatography and computational chemistry, it is concluded that l ‐form is preferred and more retained with electrostatic interaction in case of interaction between N‐PHT α‐amino acid derivatives and Chiralcel OF, N‐TCPHT α‐amino acid derivatives and Chiralcel OD, and N‐NPHT α‐amino acid derivatives and Chiracel OF. On the other hand, d ‐form is preferred and more retained with van der Waals interaction in case of interaction between N‐TCPHT α‐amino acid ester derivatives and Chiralcel OG and Chiralpak AD. Chirality 24:1037–1046, 2012. © 2012 Wiley Periodicals, Inc.     

Preparation of tri(ethylene glycol) grafted core‐shell type polymer support for solid‐phase peptide synthesis

A core‐shell type polymer support for solid‐phase peptide synthesis has been developed for high coupling efficiency of peptides and versatile applications such as on‐bead bioassays. Although various kinds of polymer supports have been developed, they have their own drawbacks including poor accessibility of reagents and incompatibility in aqueous solution. In this paper, we prepared hydrophilic tri(ethylene glycol) (TEG) grafted core‐shell type polymer supports (TEG SURE) for efficient solid‐phase peptide synthesis and on‐bead bioassays. TEG SURE was prepared by grafting TEG derivative on the surface of AM PS resin via biphasic diffusion control method and subsequent acetylation of amine groups which are located at the core region of AM PS resin. The performance of TEG SURE was evaluated by synthesizing several peptides. Three points can be highlighted: (1) easy control of loading level of TEG, (2) improved efficiency of peptide synthesis compared with the conventional resins, and (3) applicability of on‐bead bioassays.