Monitoring anthrax toxin receptor dissociation from the protective antigen by NMR

The binding of the Bacillus anthracis protective antigen (PA) to the host cell receptor is the first step toward the formation of the anthrax toxin, a tripartite set of proteins that include the enzymatic moieties edema factor (EF), and lethal factor (LF). PA is cleaved by a furin‐like protease on the cell surface followed by the formation of a donut‐shaped heptameric prepore. The prepore undergoes a major structural transition at acidic pH that results in the formation of a membrane spanning pore, an event which is dictated by interactions with the receptor and necessary for entry of EF and LF into the cell. We provide direct evidence using 1‐dimensional ¹³C‐edited ¹H NMR that low pH induces dissociation of the Von‐Willebrand factor A domain of the receptor capillary morphogenesis protein 2 (CMG2) from the prepore, but not the monomeric full length PA. Receptor dissociation is also observed using a carbon‐13 labeled, 2‐fluorohistidine labeled CMG2, consistent with studies showing that protonation of His‐121 in CMG2 is not a mechanism for receptor release. Dissociation is likely caused by the structural transition upon formation of a pore from the prepore state rather than protonation of residues at the receptor PA or prepore interface.     

Anthrax protective antigen: prepore-to-pore conversion.

PA(63), the active 63 kDa form of anthrax protective antigen, forms a heptameric ring-shaped oligomer that is believed to represent a precursor of the membrane pore formed by this protein. When maintained at pH >/=8.0, this "prepore" dissociated to monomeric subunits upon treatment with SDS at room temperature, but treatment at pH 相似文献   

PA63 channel of anthrax toxin: an extended beta-barrel

Anthrax toxin consists of three protein components: protective antigen (PA), lethal factor (LF), and edema factor (EF). PA(63), generated by protease "nicking" of whole PA, is responsible for delivering the toxin's catalytic fragments (LF and EF) to the target cell's cytosol. In planar bilayer membranes, trypsin-nicked PA makes cation-selective voltage-gated channels with a pore diameter of > or =12 A. The channels are presumed to be heptameric "mushrooms", with an extracellular "cap" region and a membrane-inserted, beta-barrel "stem". Although the crystal structure of the water-soluble monomeric form has been resolved to 2.1 A and that of the heptameric "prepore" to 4.5 A, the structure for the membrane-bound channel (pore) has not been determined. We have engineered mutant channels that are cysteine-substituted in residues in the putative beta-barrel, and identified the residues lining the channel lumen by their accessibility to a water-soluble sulfhydryl-specific reagent. The reaction with lumen-exposed cysteinyl side chains causes a drop in channel conductance, which we used to map the residues that line the pore. Our results indicate that the beta-barrel structure extends beyond the bilayer and involves residues that are buried in the monomer. The implication is that major rearrangement of domains in the prepore cap region is required for membrane insertion of the beta-barrel stem.     

An approach to characterizing single‐subunit mutations in multimeric prepores and pores of anthrax protective antigen

Heptameric pores formed by the protective antigen (PA) moiety of anthrax toxin translocate the intracellular effector moieties of the toxin across the endosomal membrane to the cytosol of mammalian cells. We devised a protocol to characterize the effects of individual mutations in a single subunit of heptameric PA prepores (pore precursors) or pores. We prepared monomeric PA containing a test mutation plus an innocuous Cys‐replacement mutation at a second residue (Lys563, located on the external surface of the prepore). The introduced Cys was biotinylated, and the protein was allowed to cooligomerize with a 20‐fold excess of wild‐type PA. Finally, biotinylated prepores were freed from wild‐type prepores by avidin affinity chromatography. For the proof of principle, we examined single‐subunit mutations of Asp425 and Phe427, two residues where Ala replacements have been shown to cause strong inhibitory effects. The single‐subunit D425A mutation inhibited pore formation by >10⁴ and abrogated activity of PA almost completely in our standard cytotoxicity assay. The single‐subunit F427A mutation caused ～100‐fold inhibition in the cytotoxicity assay, and this effect was shown to result from a combination of strong inhibition of translocation and smaller effects on pore formation and ligand affinity. Our results show definitively that replacing a single residue in one subunit of the heptameric PA prepore can inhibit the transport activity of the oligomer almost completely—and by different mechanisms, depending on the specific residue mutated.     

Insertion of anthrax protective antigen into liposomal membranes: effects of a receptor

Protective antigen (PA), the receptor-binding component of anthrax toxin, heptamerizes and inserts into the endosomal membrane at acidic pH, forming a pore that mediates translocation of the enzymic components of the toxin to the cytosol. When the heptameric pre-insertion form of PA (the prepore) is acidified in solution, it rapidly loses the ability to insert into membranes. To maximize insertion into model membranes, we examined two ways to bind the protein to large unilamellar vesicles (LUV). One involved attaching a His tag to the von Willebrand factor A domain of one of the PA receptors, ANTXR2, and using this protein as a bridge to bind PA to LUV containing a nickel-chelating lipid. The other involved using a His tag fused to the C terminus of PA to bind the protein directly to LUV containing the same lipid. Both ways enhanced pore formation at pH 5.0 strongly and about equally, as measured by the release of K+. Controls showed that pore formation in this system faithfully reproduced that in vivo. We also showed that binding unmodified ANTXR2 von Willebrand factor A to the prepore in solution enhanced its pore forming activity by slowing its inactivation at acidic pH. These findings indicate that an important role of PA receptors is to promote partitioning of PA into the bilayer by maintaining the prepore close to the target membrane and presumably in the optimal orientation as it undergoes the acidic pH-dependent conformational transition to the pore.     

Mechanism of membrane translocation by anthrax toxin: insertion and pore formation by protective antigen

Proteolytic activation of receptor-bound protective antigen (PA) at the cell surface removes PA₂₀, allowing PA₆₃ to oligomerize and form a ring-shaped heptameric prepore. The prepore binds edema factor (EF) and lethal factor (LF) and, after endocytosis and trafficking of the complex to an acidic, vesicular compartment, it undergoes membrane insertion and mediates translocation of EF/LF to the cytosol. Data from membrane conductance experiments support a model of membrane insertion in which the 2β2–2β3 loop of PA, which is disordered in native PA and the prepore, forms a 14-stranded transmembrane β-barrel. Recent studies on the process of prepore-to-pore conversion and our current understanding of the mechanism of pH-dependent translocation will be described.     

The 2beta2-2beta3 loop of anthrax protective antigen contains a dominant neutralizing epitope

Anthrax toxin consists of three proteins, protective antigen (PA), lethal factor, and edema factor. PA is the major component in the current anthrax vaccine, but the antigenic epitopes on it are not well-defined. We generated a pool of toxin-neutralizing anti-PA monoclonal antibodies (MAbs) to analyze the neutralizing epitopes of PA. Nine toxin-neutralizing MAbs obtained were found bound to three different domains of PA respectively, among which three MAbs with the strongest toxin-neutralizing activity recognized the same epitope within domain 2. This epitope was fine mapped to the chymotrypsin-sensitive site, (312)SFFD(315), in the 2beta(2)-2beta(3) loop of PA, using phage-displayed random peptide libraries and mutation analysis. The result demonstrated for the first time that the 2beta(2)-2beta(3) loop, which is involved in the transition of PA oligomers from prepore to pore, contains a dominant neutralizing epitope. This work contributes to the immunological and functional analysis of PA and offers perspective for the development of a new epitope vaccine against anthrax.     

A Novel Mechanism for Antibody-based Anthrax Toxin Neutralization: INHIBITION OF PREPORE-TO-PORE CONVERSION

Protective antigen (PA), a key component of anthrax toxin, mediates the entry of lethal factor (LF) or edema factor (EF) through a membranal pore into target cells. We have previously reported the isolation and chimerization of cAb29, an anti-PA monoclonal antibody that effectively neutralizes anthrax toxin in an unknown mechanism. The aim of this study was to elucidate the neutralizing mechanism of this antibody in vitro and to test its ability to confer post-exposure protection against anthrax in vivo. By systematic evaluation of the steps taking place during the PA-based intoxication process, we found that cAb29 did not interfere with the initial steps of intoxication, namely its ability to bind to the anthrax receptor, the consecutive proteolytic cleavage to PA₆₃, oligomerization, prepore formation, or LF binding. However, the binding of cAb29 to the prepore prevented its pH-triggered transition to the transmembranal pore, thus preventing the last step of intoxication, i.e. the translocation of LF/EF into the cell. Epitope mapping, using a phage display peptide library, revealed that cAb29 binds the 2α₁ loop in domain 2 of PA, a loop that undergoes major conformational changes during pore formation. In vivo, we found that 100% of anthrax-infected rabbits survived when treated with cAb29 12 h after exposure. In conclusion, these experiments demonstrate that cAb29 exerts its potent neutralizing activity in a unique manner by blocking the prepore-to-pore conversion process.     

The glycosylation of the extracellular loop of β2 subunits diversifies functional phenotypes of BK Channels

Large-conductance Ca²⁺- and voltage-activated potassium (MaxiK or BK) channels are composed of a pore-forming α subunit (Slo) and 4 types of auxiliary β subunits or just a pore-forming α subunit. Although multiple N-linked glycosylation sites in the extracellular loop of β subunits have been identified, very little is known about how glycosylation influences the structure and function of BK channels. Using a combination of site-directed mutagenesis, western blot and patch-clamp recordings, we demonstrated that 3 sites in the extracellular loop of β2 subunit are N-glycosylated (N-X-T/S at N88, N96 and N119). Glycosylation of these sites strongly and differentially regulate gating kinetics, outward rectification, toxin sensitivity and physical association between the α and β2 subunits. We constructed a model and used molecular dynamics (MD) to simulate how the glycosylation facilitates the association of α/β2 subunits and modulates the dimension of the extracellular cavum above the pore of the channel, ultimately to modify biophysical and pharmacological properties of BK channels. Our results suggest that N-glycosylation of β2 subunits plays crucial roles in imparting functional heterogeneity of BK channels, and is potentially involved in the pathological phenotypes of carbohydrate metabolic diseases.     

Membrane insertion by anthrax protective antigen in cultured cells

The enzymatic moieties of anthrax toxin enter the cytosol of mammalian cells via a pore in the endosomal membrane formed by the protective antigen (PA) moiety. Pore formation involves an acidic pH-induced conformational rearrangement of a heptameric precursor (the prepore), in which the seven 2beta2-2beta3 loops interact to generate a 14-strand transmembrane beta-barrel. To investigate this model in vivo, we labeled PA with the fluorophore 7-nitrobenz-2-oxa-1,3-diazole (NBD) at cysteine residues introduced into the 2beta2-2beta3 loop. Each labeled PA was bound to CHO cells, and NBD fluorescence was monitored over time in stirred cell suspensions or by confocal microscopy. A strong increase was observed with NBD at positions 305, 307, 309, and 311, sites where side chains are predicted to face the bilayer, and little change was seen at residues 304, 306, 308, 310, and 312, sites where side chains are predicted to face the pore lumen. The increase at position 305 was inhibited by membrane-restricted quenchers, low temperature, or various reagents known to affect toxin action. Of the 24 NBD attachment sites examined, all but three gave results qualitatively consistent with the beta-barrel model. Besides supporting the beta-barrel model of membrane insertion, our results describe the time course of insertion and identify PA residues where NBD gives a strong signal upon membrane insertion in vivo.     

Prepore to pore transition of a cholesterol-dependent cytolysin visualized by electron microscopy

Perfringolysin O (PFO), a soluble toxin secreted by the pathogenic Clostridium perfringens, forms large homo-oligomeric pore complexes comprising up to 50 PFO molecules in cholesterol-containing membranes. In this study, electron microscopy (EM) and single-particle image analysis were used to reconstruct two-dimensional (2D) projection maps from images of oligomeric PFO prepore and pore complexes formed on cholesterol-rich lipid layers. The projection maps are characterized by an outer and an inner ring of density peaks. The outer rings of the prepore and pore complexes are very similar; however, the protein densities that make up the inner ring of the pore complex are more intense and discretely resolved than they are for the prepore complex. The change in inner-ring protein density is consistent with a mechanism in which the monomers within the prepore complex make a transition from a partially disordered state to a more ordered transmembrane beta-barrel in the pore complex. Finally, the orientation of the monomers within the oligomeric complexes was determined by visualization of streptavidin (SA) molecules bound to biotinylated cysteine-substituted residues predicted to face either the inner or outer surface of the oligomeric pore complex. This study provides an unprecedented view of the conversion of the PFO prepore to pore complex.     

Three dimensional structure of the anthrax toxin translocon–lethal factor complex by cryo‐electron microscopy

We have visualized by cryo‐electron microscopy (cryo‐EM) the complex of the anthrax protective antigen (PA) translocon and the N‐terminal domain of anthrax lethal factor (LF_N) inserted into a nanodisc model lipid bilayer. We have determined the structure of this complex at a nominal resolution of 16 Å by single‐particle analysis and three‐dimensional reconstruction. Consistent with our previous analysis of negatively stained unliganded PA, the translocon comprises a globular structure (cap) separated from the nanodisc bilayer by a narrow stalk that terminates in a transmembrane channel (incompletely distinguished in this reconstruction). The globular cap is larger than the unliganded PA pore, probably due to distortions introduced in the previous negatively stained structures. The cap exhibits larger, more distinct radial protrusions, previously identified with PA domain three, fitted by elements of the NMFF PA prepore crystal structure. The presence of LF_N, though not distinguished due to the seven‐fold averaging used in the reconstruction, contributes to the distinct protrusions on the cap rim volume distal to the membrane. Furthermore, the lumen of the cap region is less resolved than the unliganded negatively stained PA, due to the low contrast obtained in our images of this specimen. Presence of the LF_N extended helix and N terminal unstructured regions may also contribute to this additional internal density within the interior of the cap. Initial NMFF fitting of the cryoEM‐defined PA pore cap region positions the Phe clamp region of the PA pore translocon directly above an internal vestibule, consistent with its role in toxin translocation.     

Structure of vaccinia virus A46, an inhibitor of TLR4 signaling pathway,shows the conformation of VIPER motif

Vaccinia virus (VACV) encodes many proteins that interfere with the host immune system. Vaccinia virus A46 protein specifically targets the BB‐loop motif of TIR‐domain‐containing proteins to disrupt receptor:adaptor (e.g., TLR4:MAL and TLR4:TRAM) interactions of the toll‐like receptor signaling. The crystal structure of A46 (75–227) determined at 2.58 Å resolution showed that A46 formed a homodimer and adopted a Bcl‐2‐like fold similar to other VACV proteins such as A52, B14, and K7. Our structure also revealed that VIPER (viral inhibitory peptide of TLR4) motif resides in the α1‐helix and six residues of the VIPER region were exposed to surface for binding to target proteins. In vitro binding assays between wild type and six mutants A46 (75–227) and full‐length MAL identified critical residues in the VIPER motif. Computational modeling of the A46:MAL complex structure showed that the VIPER region of A46 and AB loop of MAL protein formed a major binding interface. In summary, A46 is a homodimer with a Bcl‐2‐like fold and VIPER motif is believed to be involved in the interaction with MAL protein based on our binding assays.     

Monomer-monomer interactions drive the prepore to pore conversion of a beta-barrel-forming cholesterol-dependent cytolysin.

Perfringolysin O (PFO), a cholesterol-dependent cytolysin, forms large oligomeric pore complexes comprised of up to 50 PFO molecules. In the present studies a mutant of PFO (PFO(Y181A)) has been identified that traps PFO in a multimeric prepore complex that cannot insert its transmembrane beta-hairpins and therefore cannot form a pore. Remarkably, PFO(Y181A) can be induced to insert its transmembrane beta-hairpins if functional PFO is incorporated into the PFO(Y181A) oligomeric prepore complex. Furthermore, the transition from prepore to pore appears to be an "all or none" process; partial insertion of the transmembrane beta-barrel does not occur. Therefore, cooperative interactions between the monomers of the prepore drive the prepore to pore conversion that results in the formation of the transmembrane beta-barrel.     

Probing the pH-dependent prepore to pore transition of Bacillus anthracis protective antigen with differential oxidative protein footprinting

The protective antigen (PA) component of the anthrax toxin (ATx) plays an essential role in the pathogenesis of the bioterrorism bacterium Bacillus anthracis. After oligomerization on the cell surface and docking of lethal factor and/or edema factor, PA is internalized and undergoes a conformational change when exposed to the low pH of the endosome to form a membrane-penetrating pore. While the structure of the PA prepore has been determined, precise structural information regarding the pore state remains lacking. Oxidative protein footprinting (OPF) can provide dynamic structural information about a protein complex through analysis of amino acid oxidation both before and after a conformational change. In this study, PA at pH 7.5 and 5.5 was exposed to hydroxyl radicals generated by ionizing radiation. Mass spectrometry was then used to both identify and quantitate the extent of oxidation of differentially modified residues. Several residues were found to be more readily oxidized at pH 7.5, most of which clustered toward the bottom plane of the prepore heptamer. Two amino acids had greater oxidation rates at pH 5.5, both found on the outer periphery of the prepore. When the OPF results were mapped to a current computational model of the pore, the accessibilities of some residues were consistent with their modeled positions in the pore (i.e., Y688 and V619/I620), while data for other residues (W346 and M350) appeared to conflict with the model. The results from this study illustrate the utility of OPF in generating empirical structural information for yet undetermined structures and offering opportunities for refinement for models thereof.     

Exchange characteristics of calcium ions bound to anthrax protective antigen

Protective antigen (PA), the receptor-binding moiety of anthrax toxin, contains two calcium atoms buried within domain 1(') (amino acid residues 168-258). We showed that these ions are stably bound and exchange with free 45Ca(2+) only slowly (t(1/2) approximately 4.0 h). Dissociation is the rate-limiting step. PA(63), the heptameric prepore form of PA, showed a slightly higher exchange rate than the monomeric intact protein. Exchange by this form was retarded by binding of the enzymatic moieties of the toxin, but was unaffected by reducing the pH to 5.0, a condition known to trigger conversion of the prepore to the pore form. These results are consistent with the hypothesis that bound Ca(2+) within PA plays primarily a structural role, maintaining domain 1(') in a conformation that allows PA(63) to oligomerize and bind the enzymatic moieties of the toxin.     

Assembly of anthrax toxin pore: Lethal‐factor complexes into lipid nanodiscs

We have devised a procedure to incorporate the anthrax protective antigen (PA) pore complexed with the N‐terminal domain of anthrax lethal factor (LF_N) into lipid nanodiscs and analyzed the resulting complexes by negative‐stain electron microscopy. Insertion into nanodiscs was performed without relying on primary and secondary detergent screens. The preparations were relatively pure, and the percentage of PA pore inserted into nanodiscs on EM grids was high (～43%). Three‐dimensional analysis of negatively stained single particles revealed the LF_N‐PA nanodisc complex mirroring the previous unliganded PA pore nanodisc structure, but with additional protein density consistent with multiple bound LF_N molecules on the PA cap region. The assembly procedure will facilitate collection of higher resolution cryo‐EM LF_N‐PA nanodisc structures and use of advanced automated particle selection methods.     

Assembly and disassembly kinetics of anthrax toxin complexes

Proteolytic activation of the protective antigen (PA) component of anthrax toxin allows it to self-associate into a ring-shaped homoheptamer, [PA(63)](7), which can bind the enzymatic components lethal factor (LF) and edema factor (EF). [PA(63)](7) is a pore-precursor (prepore), and under the low-pH conditions of the endosome, it forms a transmembrane pore that allows LF and EF to enter the cytosol. PA was labeled with donor and acceptor fluorescent dyes, and F?rster resonance energy transfer was used to measure the assembly and disassembly kinetics of the prepore complex in solution. The dissociation rate constant for [PA(63)](7) was 1 x 10(-)(6) s(-)(1) (t(1/2) approximately 7 days). In contrast, a ternary complex containing the PA-binding domain of LF (LF(N)) bound to a PA(63) dimer composed of two nonoligomerizing mutants dissociated rapidly (t(1/2) approximately 1 min). Thus, the substantial decrease in the rate of disassembly of [PA(63)](7) relative to the ternary complex is due to the cooperative interactions among neighboring subunits in the heptameric ring. Low concentrations of LF(N) promoted assembly of the prepore from proteolytically activated PA, whereas high concentrations inhibited assembly of both the prepore and the ternary complex. A self-assembly scheme of anthrax toxin complexes is proposed.     

Oligomerization state and supramolecular structure of the HIV-1 Vpu protein transmembrane segment in phospholipid bilayers

HIV‐1 Vpu is an 81‐residue protein with a single N‐terminal transmembrane (TM) helical segment that is involved in the release of new virions from host cell membranes. Vpu and its TM segment form ion channels in phospholipid bilayers, presumably by oligomerization of TM helices into a pore‐like structure. We describe measurements that provide new constraints on the oligomerization state and supramolecular structure of residues 1–40 of Vpu (Vpu_1–40), including analytical ultracentrifugation measurements to investigate oligomerization in detergent micelles, photo‐induced crosslinking experiments to investigate oligomerization in bilayers, and solid‐state nuclear magnetic resonance measurements to obtain constraints on intermolecular contacts between and orientations of TM helices in bilayers. From these data, we develop molecular models for Vpu TM oligomers. The data indicate that a variety of oligomers coexist in phospholipid bilayers, so that a unique supramolecular structure can not be defined. Nonetheless, since oligomers of various sizes have similar intermolecular contacts and orientations, molecular models developed from our data are most likely representative of Vpu TM oligomers that exist in host cell membranes.     

Evidence for a prepore stage in the action of Clostridium perfringens epsilon toxin

Clostridium perfringens epsilon toxin (ETX) rapidly kills MDCK II cells at 37°C, but not 4°C. The current study shows that, in MDCK II cells, ETX binds and forms an oligomeric complex equally well at 37°C and 4°C but only forms a pore at 37°C. However, the complex formed in MDCK cells treated with ETX at 4°C has the potential to form an active pore, since shifting those cells to 37°C results in rapid cytotoxicity. Those results suggested that the block in pore formation at 4°C involves temperature-related trapping of ETX in a prepore intermediate on the MDCK II cell plasma membrane surface. Evidence supporting this hypothesis was obtained when the ETX complex in MDCK II cells was shown to be more susceptible to pronase degradation when formed at 4°C vs. 37°C; this result is consistent with ETX complex formed at 4°C remaining present in an exposed prepore on the membrane surface, while the ETX prepore complex formed at 37°C is unaccessible to pronase because it has inserted into the plasma membrane to form an active pore. In addition, the ETX complex rapidly dissociated from MDCK II cells at 4°C, but not 37°C; this result is consistent with the ETX complex being resistant to dissociation at 37°C because it has inserted into membranes, while the ETX prepore readily dissociates from cells at 4°C because it remains on the membrane surface. These results support the identification of a prepore stage in ETX action and suggest a revised model for ETX cytotoxicity, i) ETX binds to an unidentified receptor, ii) ETX oligomerizes into a prepore on the membrane surface, and iii) the prepore inserts into membranes, in a temperature-sensitive manner, to form an active pore.