Fullerene‐based inhibitors of HIV‐1 protease

A series of Fmoc‐Phe(4‐aza‐C₆₀)‐OH of fullerene amino acid derived peptides have been prepared by solid phase peptide synthesis, in which the terminal amino acid, Phe(4‐aza‐C₆₀)‐OH, is derived from the dipolar addition to C₆₀ of the Fmoc‐Nα‐protected azido amino acids derived from phenylalanine: Fmoc‐Phe(4‐aza‐C₆₀)‐Lys₃‐OH ( 1 ), Fmoc‐Phe(4‐aza‐C₆₀)‐Pro‐Hyp‐Lys‐OH ( 2 ), and Fmoc‐Phe(4‐aza‐C₆₀)‐Hyp‐Hyp‐Lys‐OH ( 3 ). The inhibition constant of our fullerene aspartic protease PRIs utilized FRET‐based assay to evaluate the enzyme kinetics of HIV‐1 PR at various concentrations of inhibitors. Simulation of the docking of the peptide Fmoc‐Phe‐Pro‐Hyp‐Lys‐OH overestimated the inhibition, while the amino acid PRIs were well estimated. The experimental results show that C₆₀‐based amino acids are a good base structure in the design of protease inhibitors and that their inhibition can be improved upon by the addition of designer peptide sequences. Copyright © 2015 European Peptide Society and John Wiley & Sons, Ltd.     

A general method for preparation of N‐Boc‐protected or N‐Fmoc‐protected α,β‐didehydropeptide building blocks and their use in the solid‐phase peptide synthesis

N‐(tert‐butyloxycarbonyl) or N‐(9‐fluorenylmethoxycarbonyl) dipeptides with C‐terminal (Z)‐α,β‐didehydrophenylalanine (?^ZPhe), (Z)‐α,β‐didehydrotyrosine (?^ZTyr), (Z)‐α,β‐didehydrotryptophan (?^ZTrp), (Z)‐α,β‐didehydromethionine (?^ZMet), (Z)‐α,β‐didehydroleucine (?^ZLeu), and (Z/E)‐α,β‐didehydroisoleucine (?^Z/EIle) were synthesised from their saturated analogues via oxidation of intermediate 2,5‐disubstituted‐oxazol‐5‐(4H)‐ones (also known as azlactones) with pyridinium tribromide followed by opening of the produced unsaturated oxazol‐5‐(4H)‐one derivatives in organic‐aqueous solution with a catalytic amount of trifluoroacetic acid or by a basic hydrolysis. In all cases, a very strong preference for Z isomers of α,β‐didehydro‐α‐amino acid residues was observed except of the ΔIle, which was obtained as the equimolar mixture of Z and E isomers. Reasons for the (Z)‐stereoselectivity and the increased stability of the aromatic α,β‐didehydro‐α‐amino acid residue oxazol‐5‐(4H)‐ones over the corresponding aliphatic ones are also discussed. It is the first use of such a procedure to synthesise peptides with the C‐terminal unsaturated residues and a peptide with 2 consecutive ΔPhe residues. This approach is very effective especially in the synthesis of peptides with aliphatic α,β‐didehydro‐α‐amino acid residues that are difficult to obtain by other methods. It allowed the first synthesis of the ?Met residue. It is also more cost‐effective and less laborious than other synthesis protocols. The dipeptide building blocks obtained were used in the solid‐phase synthesis of model peptides on a polystyrene‐based solid support. Peptides containing aromatic α,β‐didehydro‐α‐amino acid residues were obtained with PyBOP or TBTU as a coupling agent with good yields and purities. In the case of aliphatic α,β‐didehydro‐α‐amino acid residues, a good efficiency was achieved only with DPPA as a coupling agent.     

Solvent selection and optimization of α‐chymotrypsin‐catalyzed synthesis of N‐Ac‐Phe‐Tyr‐NH2 using mixture design and response surface methodology

A peptide, N‐Ac‐Phe‐Tyr‐NH₂, with angiotensin I‐converting enzyme (ACE) inhibitor activity was synthesized by an α‐chymotrypsin‐catalyzed condensation reaction of N‐acetyl phenylalanine ethyl ester (N‐Ac‐Phe‐OEt) and tyrosinamide (Tyr‐NH₂). Three kinds of solvents: a Tris–HCl buffer (80 mM, pH 9.0), dimethylsulfoxide (DMSO), and acetonitrile were employed in this study. The optimum reaction solvent component was determined by simplex centroid mixture design. The synthesis efficiency was enhanced in an organic‐aqueous solvent (Tris‐HCl buffer: DMSO: acetonitrile = 2:1:1) in which 73.55% of the yield of N‐Ac‐Phe‐Tyr‐NH₂ could be achieved. Furthermore, the effect of reaction parameters on the yield was evaluated by response surface methodology (RSM) using a central composite rotatable design (CCRD). Based on a ridge max analysis, the optimum condition for this peptide synthesis included a reaction time of 7.4 min, a reaction temperature of 28.1°C, an enzyme activity of 98.9 U, and a substrate molar ratio (Phe:Tyr) of 1:2.8. The predicted and the actual (experimental) yields were 87.6 and 85.5%, respectively. The experimental design and RSM performed well in the optimization of synthesis of N‐Ac‐Phe‐Tyr‐NH₂, so it is expected to be an effective method for obtaining a good yield of enzymatic peptide. © 2012 American Institute of Chemical Engineers Biotechnol. Prog., 2012     

New methodology for automated SPOT synthesis of peptides on cellulose using 1,3,5‐triazine derivatives as linkers and as coupling reagents

Two new rigid bi‐aromatic linkers for synthesis of peptide arrays by SPOT methodology were obtained from cellulose treated with 2,4‐dichloro‐6‐methoxy‐1,3,5‐triazine. Reaction with m‐phenylenediamine gave non‐cleavable TYPE I linker which enabled attachment of the peptides via resistant to harsh reaction conditions amide, ether, and amine bonds. Reaction with 3‐Fmoc‐aminobenzoic acid followed by thermal isomerization of the intermediate “superactive” ester producing an amide‐like bond gave TYPE II linker that was very stable during peptide synthesis. However, the peptide was cleavable, with fragment of the linker, in the presence of 1 M LiOH solution. The uniform loading of the cellulose and efficient synthesis of the peptide array was achieved by using N‐(4,6‐dimethoxy‐1,3,5‐triazin‐1‐yl)‐N‐methylmorpholinium 4‐toluenesulfonate as the coupling reagent.     

Synthesis and application of Nα‐Fmoc‐Nπ‐4‐methoxybenzyloxymethylhistidine in solid phase peptide synthesis

The 4‐methoxybenzyloxymethyl (MBom) group was introduced at the N^π‐position of the histidine (His) residue by using a regioselective procedure, and its utility was examined under standard conditions used for the conventional and the microwave (MW)‐assisted solid phase peptide synthesis (SPPS) with 9‐fluorenylmethyoxycarbonyl (Fmoc) chemistry. The N^π‐MBom group fulfilling the requirements for the Fmoc strategy was found to prevent side‐chain‐induced racemization during incorporation of the His residue even in the case of MW‐assisted SPPS performed at a high temperature. In particular, the MBom group proved to be a suitable protecting group for the convergent synthesis because it remains attached to the imidazole ring during detachment of the protected His‐containing peptide segments from acid‐sensitive linkers by treatment with a weak acid such as 1% trifluoroacetic acid in dichloromethane. We also demonstrated the facile synthesis of Fmoc‐His(π‐MBom)‐OH with the aid of purification procedure by crystallization to effectively remove the undesired τ‐isomer without resorting to silica gel column chromatography. This means that the present synthetic procedure can be used for large‐scale production without any obstacles. Copyright © 2012 European Peptide Society and John Wiley & Sons, Ltd.     

Mitsunobu Alkylation of Cancerostatic 5‐Fluorouridine with (2E)‐10‐Hydroxydec‐2‐enoic Acid,a Fatty Acid from Royal Jelly with Multiple Biological Activities

5‐Fluorouridine ( 1 ) – a nucleoside antimetabolite with strong cancerostatic properties – was protected i) at the 2′‐ and 3′‐OH groups with a heptan‐4‐ylidene residue and ii) at the 5′‐OH group with a (4‐methoxyphenyl)(diphenyl)methyl residue. This fully protected compound, 3 , was submitted to a Mitsunobu reaction with the N‐hydroxysuccinimide (NHS) ester, 5 , of (2E)‐10‐hydroxydec‐2‐enoic acid ( 4 ) which gave nucleolipid 6 . The latter was detritylated with Cl₂CHCOOH to yield the co‐drug 7 as NHS ester.     

Synthesis and application of N‐[1‐(4‐(4‐fluorophenyl)‐2,6‐dioxocyclohexylidene)ethyl] (Fde)‐protected amino acids for optimization of solid‐phase peptide synthesis using gel‐phase 19F NMR spectroscopy

N‐[1‐(4‐(4‐fluorophenyl)‐2,6‐dioxocyclohexylidene)ethyl] (Fde) protected amino acids have been prepared and applied in solid‐phase peptide synthesis monitored by gel‐phase ¹⁹F NMR spectroscopy. The Fde protective group could be cleaved with 2% hydrazine or 5% hydroxylamine solution in DMF as determined with gel‐phase ¹⁹F NMR spectroscopy. The dipeptide Ac‐L ‐Val‐L ‐Val‐NH₂ 12 was constructed using Fde‐L ‐Val‐OH and no noticeable racemization took place during the amino acid coupling with N,N′‐diisopropylcarbodiimide and 1‐hydroxy‐7‐azabenzotriazole or Fde deblocking. To extend the scope of Fde protection, the hydrophobic nonapeptide LLLLTVLTV from the signal sequence of mucin MUC1 was successfully prepared using Fde‐L ‐Leu‐OH at diagnostic positions. Copyright © 2009 European Peptide Society and John Wiley & Sons, Ltd.     

Novel side reaction accompanying cyclization of Glu(R1)‐Glu(R2) dipeptides via lactamization of the Glu(R1) residue

A series of linear peptides with the general formula H‐Glu(R1)‐Glu(R2)‐OH was subjected to cyclization under standard conditions. Formation of respective 2,5‐diketopiperazines was accompanied by transformation of the N‐terminal Glu(R1) to pyroglutamic acid residue. Even in the case R1 is an amino acid residue attached to the N‐terminal γ‐carboxyl group, lactamization leads to its elimination. The observed reaction has not been reported so far in the literature. Correspondingly, an alternative route to Glu(R1)‐Glu(R2)‐containing 2,5‐diketopiperazines was applied to improve the overall yields.     

Stereoselective Synthesis of (3R)‐3‐Alkyl‐4,1‐Benzoxazepine‐2,5‐Diones

Novel 3‐alkyl‐4,1‐benzoxazepine‐2,5‐diones were synthesized in good ee exploiting the chiral pool methodology, an economical way of asymmetric synthesis. Various anthranilic acids are coupled with different α‐haloacids to afford N‐acylated anthranilic acid intermediates which undergo cyclization to (3R)‐3‐alkyl‐4,1‐benzoxazepines‐2,5‐diones. Chirality 25:865–870, 2013. © 2013 Wiley Periodicals, Inc.     

Synthesis of linear and cyclic opioid‐based peptide analogs containing multiple N‐methylated amino acid residues

A series of six novel opioid peptide analogs containing one to three N‐methylamino acid residues, and six cyclic counterparts of these peptides were prepared by the solid‐phase method. Introduction of two consecutive N‐methylated amino acids, as well as cyclization of such conformationally constrained sequences, turned out to be challenging. The use of a recently reported triazine‐based coupling reagent, 4‐(4,6‐dimethoxy‐1,3,5‐triazin‐2‐yl)‐4‐methylmorpholinium toluene‐4‐sulfonate, enabled the synthesis and cyclization of the designed analogs in acceptable yields and with a lesser amount of by‐products than observed with the standard coupling reagents such as TBTU or HATU.Copyright © 2015 European Peptide Society and John Wiley & Sons, Ltd.     

Pentapeptides containing two dehydrophenylalanine residues ‐ synthesis,structural studies and evaluation of their activity towards cathepsin C

Synthesis, structural and biological studies of pentapeptides containing two ΔPhe residues (Z and E isomers) in position 2 and 4 in peptide chain were performed. All the investigated peptides adopted bent conformation and majority of them could exist as two different conformers in solution. Only pentapeptides, containing free N‐termini appeared to act as weak inhibitors of cathepsin C with the slow‐binding, competitive mechanism of inhibition, free acids being bound slightly better than their methyl esters. Results of molecular modeling suggested significant difference between peptides, depending of the type of amino acid residue in position 5 in peptide chain. Dehydropeptides containing Gly residue in this position may act as competitive slow‐reacting substrates and therefore exhibit inhibitory‐like properties. Copyright © 2008 European Peptide Society and John Wiley & Sons, Ltd.     

Improved anticancer potency by head‐to‐tail cyclization of short cationic anticancer peptides containing a lipophilic β2,2‐amino acid

We have recently reported a series of synthetic anticancer heptapeptides (H‐KKWβ^2,2WKK‐NH₂) containing a central achiral and lipophilic β^2,2‐amino acid that display low toxicity against non‐malignant cells and high proteolytic stability. In the present study, we have further investigated the effects of increasing the rigidity and amphipathicity of two of our lead heptapeptides by preparing a series of seven to five residue cyclic peptides containing the two most promising β^2,2‐amino acid derivatives as part of the central lipophilic core. The peptides were tested for anticancer activity against human Burkitt's lymphoma (Ramos cells), haemolytic activity against human red blood cells (RBC) and cytotoxicity against healthy human lung fibroblast cells (MRC‐5). The results demonstrated a considerable increase in anticancer potency following head‐to‐tail peptide cyclization, especially for the shortest derivatives lacking a tryptophan residue. High‐resolution NMR studies and molecular dynamics simulations together with an annexin‐V‐FITC and propidium iodide fluorescent assay showed that the peptides had a membrane disruptive mode of action and that the more potent peptides penetrated deeper into the lipid bilayer. The need for new anticancer drugs with novel modes of action is demanding, and development of short cyclic anticancer peptides with an overall rigidified and amphipathic structure is a promising approach to new anticancer agents. Copyright © 2012 European Peptide Society and John Wiley & Sons, Ltd.     

Peptide purification by affinity chromatography based on α‐ketoacyl group chemistry

Significant advances have been achieved in the fields of peptide/protein synthesis, permitting the preparation of large, complex molecules. Shortcomings, however, continue to exist in the area of peptide purification. This paper details some studies we undertook to develop a new strategy for peptide purification based on a reactivity of α‐ketoacyl groups in peptides. The α‐ketoacyl peptide was generated from N^ε‐acyl‐lysyl‐peptide in the solid phase via a transamination reaction using glyoxylic acid and nickel(II) ion. Cleavage of the α‐ketoacyl group with o‐phenylenediamine gave the target peptide in an acceptable yield and purity. We first carried out a careful step‐by‐step optimization of the purification conditions using a model peptide. The strategy was then used in the purification of a transmembrane peptide that could not be effectively purified using a conventional RP‐HPLC system due to the strong hydrophobicity of the peptide and its high tendency to aggregate. Copyright © 2009 European Peptide Society and John Wiley & Sons, Ltd.     

Lewis acid catalysed methylation of N‐(9H‐fluoren‐9‐yl)methanesulfonyl (Fms) protected lipophilic α‐amino acid methyl esters

This work reports an efficient Lewis acid catalysed N‐methylation procedure of lipophilic α‐amino acid methyl esters in solution phase. The developed methodology involves the use of the reagent system AlCl₃/diazomethane as methylating agent and α‐amino acid methyl esters protected on the amino function with the (9H‐fluoren‐9‐yl)methanesulfonyl (Fms) group. The removal of Fms protecting group is achieved under the same conditions to those used for Fmoc removal. Thus the Fms group can be interchangeable with the Fmoc group in the synthesis of N‐methylated peptides using standard Fmoc‐based strategies. Finally, the absence of racemization during the methylation reaction and the removal of Fms group were demonstrated by synthesising a pair of diastereomeric dipeptides. Copyright © 2015 European Peptide Society and John Wiley & Sons, Ltd.     

Building blocks for the synthesis of post‐translationally modified glycated peptides and proteins

Growing interest in synthetic peptides carrying post‐traslational modifications, in general, and the Amadori modification in particular, raises the need for specific building blocks that can be used in stepwise peptide synthesis. Herein, we report the synthesis of N^α‐Fmoc‐Lys‐OH derivatives containing N^ε‐1‐deoxyfructopyranosyl moiety. Copyright © 2008 European Peptide Society and John Wiley & Sons, Ltd.     

Synthesis of peptide thioesters via an N–S acyl shift reaction under mild acidic conditions on an N‐4,5‐dimethoxy‐2‐mercaptobenzyl auxiliary group

An efficient method of peptide thioester synthesis is described. The reaction is based on an N‐4,5‐dimethoxy‐2‐mercaptobenzyl (Dmmb) auxiliary‐assisted N‐S acyl shift reaction after assembling a peptide chain by Fmoc‐solid phase peptide synthesis. The Dmmb‐assisted N‐S acyl shift reaction proceeded efficiently under mildly acidic conditions, and the peptide thioester was obtained by treating the resulting S‐peptide with sodium 2‐mercaptoethanesulfonate. No detectable epimerization of the amino acid residue adjacent to the thioester moiety in the case of Leu was found. The reactions were also amenable to the on‐resin preparation of peptide thioesters. The utility was demonstrated by the synthesis of a 41‐mer peptide thioester, a phosphorylated peptide thioester and a 33‐mer peptide thioester containing a trimethylated lysine residue. Copyright © 2009 European Peptide Society and John Wiley & Sons, Ltd.     

General method for selective labelling of double‐chain cysteine‐rich peptides with a lanthanide chelate via solid‐phase synthesis

The use of lanthanides in preference to radioisotopes as probes for various biological assays has gained enormous popularity. The introduction of lanthanide chelates to peptides/proteins can be carried out either in solution using a commercially available labelling kit or by solid‐phase peptide synthesis using an appropriate lanthanide chelate. Herein, a detailed protocol for the latter is provided for the labelling of peptides or small proteins with diethylenetriamine‐N, N, N″, N″‐tetra‐tert‐butyl acetate‐N′‐acetic acid (DTPA) chelate or other similar chelates on a solid support using a chimeric insulin‐like peptide composed of human insulin‐like peptide 5 (INSL5) A‐chain and relaxin‐3 B‐chain as a model peptide. Copyright © 2011 European Peptide Society and John Wiley & Sons, Ltd.     

Screening for glucose‐triggered modifications of glutathione

Nonenzymatic protein glycation is caused by a Schiff's base reaction between the aldehyde groups of reducing sugars and the primary amines of proteins. These structures may undergo further Amadori rearrangement and free radical‐mediated oxidation to finally generate irreversible advanced glycation end products (AGEs). One of the factors known to modulate the glycation of proteins is glutathione, the most abundant nonprotein thiol tripeptide with the γ‐linkage, H‐Glu(Cys‐Gly‐OH)‐OH (GSH). Screening for products formed by GSH with D ‐glucose is an essential step in understanding the participation of GSH in glycation (the Maillard) reaction. Under the conditions used in these studies we observed N‐(1‐deoxy‐D ‐fructos‐1‐yl)‐pyroglutamic acid as the major glycation product formed in the mixtures of GSH and glucose in vitro. A RP HPLC/MS and tandem MS analyses of the GSH/glucose mixtures revealed that cleavage of the N‐terminal glutamic acid and the formation of pyroglutamic acid‐related Amadori product were accompanied by generation of Cys‐Gly‐derived Amadori and thiazolidine compounds. Copyright © 2009 European Peptide Society and John Wiley & Sons, Ltd.     

Isopeptide method: development of S‐acyl isopeptide method for the synthesis of difficult sequence‐containing peptides

A novel strategy for a more efficient synthesis of difficult sequence‐containing peptides, the S‐acyl isopeptide method, was developed and successfully applied. A model pentapeptide Ac–Val–Val–Cys–Val–Val–NH₂ was synthesized via its water‐soluble S‐acyl isopeptide using an S‐acyl isodipeptide unit, Boc–Cys(Fmoc–Val)–OH. An S‐acyl isopeptide possessing excellent water solubility could be readily and quantitatively converted to the native peptide via an S N intramolecular acyl migration reaction at pH 7.4. Thus, the S‐acyl isopeptide method provides a useful tool in peptide chemistry. Copyright © 2008 European Peptide Society and John Wiley & Sons, Ltd.     

mRNA display selection and solid‐phase synthesis of Fc‐binding cyclic peptide affinity ligands

Cyclic peptides are attractive candidates for synthetic affinity ligands due to their favorable properties, such as resistance to proteolysis, and higher affinity and specificity relative to linear peptides. Here we describe the discovery, synthesis and characterization of novel cyclic peptide affinity ligands that bind the Fc portion of human Immunoglobulin G (IgG; hFc). We generated an mRNA display library of cyclic pentapeptides wherein peptide cyclization was achieved with high yield and selectivity, using a solid‐phase crosslinking reaction between two primary amine groups, mediated by a homobifunctional linker. Subsequently, a pool of cyclic peptide binders to hFc was isolated from this library and chromatographic resins incorporating the selected cyclic peptides were prepared by on‐resin solid‐phase peptide synthesis and cyclization. Significantly, this approach results in resins that are resistant to harsh basic conditions of column cleaning and regeneration. Further studies identified a specific cyclic peptide—cyclo[Link‐M‐WFRHY‐K]—as a robust affinity ligand for purification of IgG from complex mixtures. The cyclo[Link‐M‐WFRHY‐K] resin bound selectively to the Fc fragment of IgG, with no binding to the Fab fragment, and also bound immunoglobulins from a variety of mammalian species. Notably, while the recovery of IgG using the cyclo[Link‐M‐WFRHY‐K] resin was comparable to a Protein A resin, elution of IgG could be achieved under milder conditions (pH 4 vs. pH 2.5). Thus, cyclo[Link‐M‐WFRHY‐K] is an attractive candidate for developing a cost‐effective and robust chromatographic resin to purify monoclonal antibodies (mAbs). Finally, our approach can be extended to efficiently generate and evaluate cyclic peptide affinity ligands for other targets of interest. Biotechnol. Bioeng. 2013; 110: 857–870. © 2012 Wiley Periodicals, Inc.