Re‐evaluating the stability of COMU in different solvents

COMU is uronium‐type coupling reagent based on OxymaPure. It showed several advantages over classical benzotriazole‐based coupling reagents such as higher solubility, water‐soluble byproduct, and monitoring the reaction by changing of color. Although COMU is well known to perform excellent in solution, but its hydrolytic stability in DMF limits its use in automatic peptide synthesizer. Herein, we evaluated the hydrolytic stability of COMU in γ‐valerolactone (GVL), acetonitrile (ACN) and N‐formylmorpholine (NFM) and compared its stability against DMF. The stability of COMU after 24 h was found to be 88 and 89% in GVL and ACN, respectively, when compared in DMF (14%). Further, the demanding Aib‐ACP decapeptide and JR decapeptide were successfully synthesized using COMU dissolved in GVL or ACN while Fmoc amino acids were dissolved in DMF. Copyright © 2017 European Peptide Society and John Wiley & Sons, Ltd.     

Fullerene‐based inhibitors of HIV‐1 protease

A series of Fmoc‐Phe(4‐aza‐C₆₀)‐OH of fullerene amino acid derived peptides have been prepared by solid phase peptide synthesis, in which the terminal amino acid, Phe(4‐aza‐C₆₀)‐OH, is derived from the dipolar addition to C₆₀ of the Fmoc‐Nα‐protected azido amino acids derived from phenylalanine: Fmoc‐Phe(4‐aza‐C₆₀)‐Lys₃‐OH ( 1 ), Fmoc‐Phe(4‐aza‐C₆₀)‐Pro‐Hyp‐Lys‐OH ( 2 ), and Fmoc‐Phe(4‐aza‐C₆₀)‐Hyp‐Hyp‐Lys‐OH ( 3 ). The inhibition constant of our fullerene aspartic protease PRIs utilized FRET‐based assay to evaluate the enzyme kinetics of HIV‐1 PR at various concentrations of inhibitors. Simulation of the docking of the peptide Fmoc‐Phe‐Pro‐Hyp‐Lys‐OH overestimated the inhibition, while the amino acid PRIs were well estimated. The experimental results show that C₆₀‐based amino acids are a good base structure in the design of protease inhibitors and that their inhibition can be improved upon by the addition of designer peptide sequences. Copyright © 2015 European Peptide Society and John Wiley & Sons, Ltd.     

Nucleobase‐caged peptide nucleic acids: PNA/PNA duplex destabilization and light‐triggered PNA/PNA recognition

The 2‐(o‐nitrophenyl)‐propyl (NPP) group is used as caging group to mask the nucleobases adenine and cytosine in N‐(2‐aminoethyl)glycine peptide nucleic acids (aeg‐PNA). The adeninyl and cytosinyl nucleo amino acid building blocks Fmoc‐a^NPP‐aeg‐OH and Fmoc‐c^NPP‐aeg‐OH were synthesized and incorporated into PNA sequences by Fmoc solid phase synthesis relying on high stability of the NPP nucleobase protecting group toward Fmoc‐cleavage, coupling, capping, and resin cleavage conditions. Removal of the nucleobase caging group was achieved by UV‐LED irradiation at 365 nm. The nucleobase caging groups provided sterical crowding effecting the Watson–Crick base pairing, and thereby, the PNA double strand stabilities. Duplex formation can completely be suppressed for complementary PNA containing caging groups in both strands. PNA/PNA recognition can be completely restored by UV light‐triggered release of the photolabile protecting group. Copyright © 2013 European Peptide Society and John Wiley & Sons, Ltd.     

Lewis acid catalysed methylation of N‐(9H‐fluoren‐9‐yl)methanesulfonyl (Fms) protected lipophilic α‐amino acid methyl esters

This work reports an efficient Lewis acid catalysed N‐methylation procedure of lipophilic α‐amino acid methyl esters in solution phase. The developed methodology involves the use of the reagent system AlCl₃/diazomethane as methylating agent and α‐amino acid methyl esters protected on the amino function with the (9H‐fluoren‐9‐yl)methanesulfonyl (Fms) group. The removal of Fms protecting group is achieved under the same conditions to those used for Fmoc removal. Thus the Fms group can be interchangeable with the Fmoc group in the synthesis of N‐methylated peptides using standard Fmoc‐based strategies. Finally, the absence of racemization during the methylation reaction and the removal of Fms group were demonstrated by synthesising a pair of diastereomeric dipeptides. Copyright © 2015 European Peptide Society and John Wiley & Sons, Ltd.     

Microwave‐assisted 18O labeling of Fmoc‐protected amino acids

Recently, there has been an increased interest in isotopical labeling of peptides. Although there are several techniques allowing for a complete labeling of all carboxyl groups in peptides, regioselective labeling would be beneficial in many situations. Such labeling requires the use of ¹⁸O‐labeled Fmoc amino acids. We have designed a method for such labeling that is an improvement on a technique proposed earlier. The new procedure is suitable for microscale synthesis and could be used in peptide and proteomics laboratories. Although for the majority of tested amino acids our method gives good labeling efficiency, it is time consuming. Therefore, we have decided to use microwave‐assisted procedure. This approach resulted in reduction of reaction time to 15 min and increased reaction efficiency. Copyright © 2014 European Peptide Society and John Wiley & Sons, Ltd.     

On‐resin conversion of Cys(Acm)‐containing peptides to their corresponding Cys(Scm) congeners

The Acm protecting group for the thiol functionality of cysteine is removed under conditions (Hg²⁺) that are orthogonal to the acidic milieu used for global deprotection in Fmoc‐based solid‐phase peptide synthesis. This use of a toxic heavy metal for deprotection has limited the usefulness of Acm in peptide synthesis. The Acm group may be converted to the Scm derivative that can then be used as a reactive intermediate for unsymmetrical disulfide formation. It may also be removed by mild reductive conditions to generate unprotected cysteine. Conversion of Cys(Acm)‐containing peptides to their corresponding Cys(Scm) derivatives in solution is often problematic because the sulfenyl chloride reagent used for this conversion may react with the sensitive amino acids tyrosine and tryptophan. In this protocol, we report a method for on‐resin Acm to Scm conversion that allows the preparation of Cys(Scm)‐containing peptides under conditions that do not modify other amino acids. Copyright © 2010 European Peptide Society and John Wiley & Sons, Ltd.     

An HPLC‐ESMS study on the solid‐phase assembly of C‐terminal proline peptides

DKP formation is a serious side reaction during the solid‐phase synthesis of peptide acids containing either Pro or Gly at the C‐terminus. This side reaction not only leads to a lower overall yield, but also to the presence in the reaction crude of several deletion peptides lacking the first amino acids. For the preparation of protected peptides using the Fmoc/tBu strategy, the use of a ClTrt‐Cl‐resin with a limited incorporation of the C‐terminal amino acid is the method of choice. The use of resins with higher loading levels leads to more impure peptide crudes. The use of HPLC‐ESMS is a useful method for analysing complex samples, such as those formed when C‐terminal Pro peptides are prepared by non‐optimized solid‐phase strategies. Copyright © 1999 European Peptide Society and John Wiley & Sons, Ltd.     

A convenient microwave‐enhanced solid‐phase synthesis of short chain N‐methyl‐rich peptides

Structural modification of the peptide backbone via N‐methylation is a powerful tool to modulate the pharmacokinetic profile and biological activity of peptides. Here we describe a rapid and highly efficient microwave(MW)‐assisted Fmoc/tBu solid‐phase method to prepare short chain N‐methyl‐rich peptides, using Rink amide p‐methylbenzhydrylamine (MBHA) resin as solid‐phase support. This method produces peptides in high yield and purity, and reduces the time required for Fmoc‐N‐methyl amino acid coupling. Copyright © 2010 European Peptide Society and John Wiley & Sons, Ltd.     

Synthesis of Aβ[1‐42] and its derivatives with improved efficiency

It has been proved that the principal component of senile plaques is aggregates of β‐amyloid peptide (Aβ) in cases of one of the most common forms of age‐related neurodegenerative disorders, Alzheimer's disease (AD). Although the synthetic methods for the synthesis of Aβ peptides have been developed since their first syntheses, Aβ[1‐42] is still problematic to prepare. The highly hydrophobic composition of Aβ[1‐42] results in aggregation between resin‐bound peptide chains or intrachain aggregation which leads to a decrease in the rates of deprotection and repetitive incomplete coupling reactions during 9‐flurenylmethoxycarbonyl (Fmoc) synthesis. In order to avoid aggregation and/or disrupt internal aggregation during stepwise Fmoc solid phase synthesis and to improve the quality of crude products, several attempts have been made. Since highly pure Aβ peptides in large quantities are used in biological experiments, we wanted to develop a method for a rational synthesis of human Aβ[1‐42] with high purity and adequate yield. This paper reports a convenient methodology with a novel solvent system for the synthesis of Aβ[1‐42], its N‐terminally truncated derivatives Aβ[4‐42] and Aβ[5‐42], and Aβ[1‐42] labeled with 7‐amino‐4‐methyl‐3‐coumarinylacetic acid (AMCA) at the N‐terminus using Fmoc strategy. The use of 10% anisole in Dimethylformamide/Dichloromethane (DMF/DCM) can substantially improve the purity and yield of crude Aβ[1‐42] and has been shown to be an optimal coupling condition for the synthesis of Aβ[1‐42]. Anisole is a cheap and simple aid in the synthesis of ‘difficult sequences’ where other solvents are less successful in the prevention of aggregation during the synthesis. Copyright © 2006 European Peptide Society and John Wiley & Sons, Ltd.     

Synthesis of peptides containing 5‐hydroxytryptophan,oxindolylalanine, N‐formylkynurenine and kynurenine

ROS, continuously produced in cells, can reversibly or irreversibly oxidize proteins, lipids, and DNA. At the protein level, cysteine, methionine, tryptophan, and tyrosine residues are particularly prone to oxidation. Here, we describe the solid phase synthesis of peptides containing four different oxidation products of tryptophan residues that can be formed by oxidation in proteins in vitro and in vivo: 5‐HTP, Oia, Kyn, and NFK. First, we synthesized Oia and NFK by selective oxidation of tryptophan and then protected the ${\bf \alpha}$ ‐amino group of both amino acids, and the commercially available 5‐HTP, with Fmoc‐succinimide. High yields of Fmoc‐Kyn were obtained by acid hydrolysis of Fmoc‐NFK. All four Fmoc derivatives were successfully incorporated, at high yields, into three different peptide sequences from skeletal muscle actin, creatin kinase (M‐type), and ${\bf \beta}$ ‐enolase. The correct structure of all modified peptides was confirmed by tandem mass spectrometry. Interestingly, isobaric peptides containing 5‐HTP and Oia were always well separated in an acetonitrile gradient with TFA as the ion‐pair reagent on a C₁₈‐phase. Such synthetic peptides should prove useful in future studies to distinguish isobaric oxidation products of tryptophan. Copyright © 2011 European Peptide Society and John Wiley & Sons, Ltd.     

Racemisation of N‐Fmoc phenylglycine under mild microwave‐SPPS and conventional stepwise SPPS conditions: attempts to develop strategies for overcoming this

We have been engaged in the microwave‐solid phase peptide synthesis (SPPS) synthesis of the phenylglycine (Phg)‐containing pentapeptide H‐Ala‐Val‐Pro‐Phg‐Tyr‐NH₂ (1) previously demonstrated to bind to the so‐called BIR3 domain of the anti‐apoptotic protein XIAP. Analysis of the target peptide by a combination of RP‐HPLC, ESI‐MS, and NMR revealed the presence of two diastereoisomers arising out of the racemisation of the Phg residue, with the percentage of the LLLDL component assessed as 49%. We performed the synthesis of peptide (1) using different microwave and conventional stepwise SPPS conditions in attempts to reduce the level of racemisation of the Phg residue and to determine at which part of the synthetic cycle the epimerization had occurred. We determined that racemisation occurred mainly during the Fmoc‐group removal and, to a much lesser extent, during activation/coupling of the Fmoc‐Phg‐OH residue. We were able to obtain the desired peptide with a 71% diastereomeric purity (29% LLLDL as impurity) by utilizing microwave‐assisted SPPS at 50 °C and power 22 Watts, when the triazine‐derived coupling reagent DMTMM‐BF₄ was used, together with NMM as an activator base, for the incorporation of this residue and 20% piperidine as an Fmoc‐deprotection base. In contrast, the phenylalanine analogue of the above peptide, H‐Ala‐Val‐Pro‐Phe‐Tyr‐NH₂ (2), was always obtained as a single diastereoisomer by using a range of standard coupling and deprotection conditions. Our findings suggest that the racemisation of Fmoc‐Phg‐OH, under both microwave‐SPPS and stepwise conventional SPPS syntheses conditions, is very facile but can be limited through the use of the above stated conditions. Copyright © 2012 European Peptide Society and John Wiley & Sons, Ltd.     

Side‐chain thioamides as fluorescence quenching probes

Thioamides, single atom oxygen‐to‐sulfur substitutions of canonical amide bonds, can be valuable probes for protein folding and protease studies. Here, we investigate the fluorescence quenching properties of thioamides incorporated into the side‐chains of amino acids. We synthesize and incorporate Fmoc‐protected, solid‐phase peptide synthesis building blocks for introducing N^ε‐thioacetyl‐lysine and γ‐thioasparagine. Using rigid model peptides, we demonstrate the distance‐dependent fluorescence quenching of these thioamides. Furthermore, we describe attempts to incorporate of N^ε‐thioacetyl‐lysine into proteins expressed in Escherichia coli using amber codon suppression.     

Optimized syntheses of Fmoc azido amino acids for the preparation of azidopeptides

The rise of CuI‐catalyzed click chemistry has initiated an increased demand for azido and alkyne derivatives of amino acid as precursors for the synthesis of clicked peptides. However, the use of azido and alkyne amino acids in peptide chemistry is complicated by their high cost. For this reason, we investigated the possibility of the in‐house preparation of a set of five Fmoc azido amino acids: β‐azido l ‐alanine and d ‐alanine, γ‐azido l ‐homoalanine, δ‐azido l ‐ornithine and ω‐azido l ‐lysine. We investigated several reaction pathways described in the literature, suggested several improvements and proposed several alternative routes for the synthesis of these compounds in high purity. Here, we demonstrate that multigram quantities of these Fmoc azido amino acids can be prepared within a week or two and at user‐friendly costs. We also incorporated these azido amino acids into several model tripeptides, and we observed the formation of a new elimination product of the azido moiety upon conditions of prolonged couplings with 2‐(1H‐benzotriazol‐1‐yl)‐1,1,3,3‐tetramethyluronium hexafluorophosphate/DIPEA. We hope that our detailed synthetic protocols will inspire some peptide chemists to prepare these Fmoc azido acids in their laboratories and will assist them in avoiding the too extensive costs of azidopeptide syntheses. Experimental procedures and/or analytical data for compounds 3 – 5 , 20 , 25 , 26 , 30 and 43 – 47 are provided in the supporting information. © 2017 The Authors Journal of Peptide Science published by European Peptide Society and John Wiley & Sons Ltd.     

A novel solid phase approach to Aia‐containing peptides

A strategy was developed to directly assemble 4‐amino‐1,2,4,5‐tetrahydro‐indolo[2,3‐c]‐azepin‐3‐ones on solid‐phase‐supported peptide sequences. Fmoc‐ and Boc‐based strategies were investigated. The Fmoc‐strategy approach strongly depends on the peptide sequence being synthesized while the Boc‐based synthesis leads to excellent results for all the selected peptide analogs. The method was applied to prepare Aia‐analogs of several bioactive peptides containing one or more Trp‐residues which were shown to be important for biological recognition. Copyright © 2008 European Peptide Society and John Wiley & Sons, Ltd.     

Fmoc‐based peptide thioester synthesis with self‐purifying effect: heading to native chemical ligation in parallel formats

The chemical synthesis of proteins has facilitated functional studies of proteins due to the site‐specific incorporation of post‐translational modifications, labels, and non‐proteinogenic amino acids. Moreover, native chemical ligation provides facile access to proteins by chemical means. However, the application of the native chemical ligation reaction in the synthesis of parallel formats such as protein arrays has been complicated because of the often cumbersome and time‐consuming synthesis of the required peptide thioesters. An Fmoc‐based peptide thioester synthesis with self‐purification on the sulfonamide ‘safety‐catch’ linker widens this bottleneck because HPLC purification can be avoided. The method is based on an on‐resin cyclization–thiolysis reaction sequence. A macrocyclization via the N‐terminus of the full‐length peptide followed by a thiolytic C‐terminal ring opening allows selective detachment of the truncation products and the full‐length peptide. A brief overview of the chemical aspects of this method is provided including the optimization steps and the automation process. Furthermore, the application of the cyclization–thiolysis approach combined with the native chemical ligation reaction in the parallel synthesis of a library of 16 SH3‐domain variants of SHO1 in yeast is described, demonstrating the value of this new technique for the chemical synthesis of protein arrays. Copyright © 2013 European Peptide Society and John Wiley & Sons, Ltd.     

Microwave‐assisted solid‐phase peptide synthesis of neurosecretory protein GL composed of 80 amino acid residues

We recently identified a novel cDNA encoding a small secretory protein of 80 amino acid residues, termed neurosecretory protein GL (NPGL), from the chicken hypothalamus. Homologs of NPGL have been reported to be present in mammals, such as human and rat. NPGL is amidated at its C‐terminus, contains an intramolecular disulfide bond, and is hydrophobic in nature. In this study, we have optimized the synthesis of the entire 80‐amino acid peptide sequence of rat NPGL by microwave‐assisted solid‐phase peptide synthesis. NPGL was obtained with a 10% yield when the coupling reactions were performed using 1‐[Bis(dimethylamino)methylene]‐1H‐1,2,3‐triazolo[4,5‐b]pyridinium‐3‐oxid hexafluorophosphate (HATU) at 50 °C for 5 min, and Fmoc deprotections were performed using 40% piperidine containing 0.1 M HOBt. Furthermore, the disulfide bond of NPGL was formed with 20% yield with the use of glutathione‐containing redox buffer and 50% acetonitrile. Copyright © 2015 European Peptide Society and John Wiley & Sons, Ltd.     

Comparative studies of Nsc and Fmoc as Nα‐protecting groups for SPPS

2‐(4‐Nitrophenyl)sulfonylethoxycarbonyl (Nsc) is an alternative base‐labile N^α‐protecting group to 9‐fluorenylmethoxycarbonyl (Fmoc) for amino acids. The UV spectrum of the Nsc group exhibits moderate absorption at 380 nm which is excellent for real‐time monitoring of the deprotection process. It also decreases the rearrangement of X‐Asp, which can be a serious problem in SPPS. Copyright © 1999 European Peptide Society and John Wiley & Sons, Ltd.     

Regeneration of aged DMF for use in solid‐phase peptide synthesis

Dimethylformamide (DMF), which is still the most commonly used solvent for Fmoc‐SPPS, has the potential for degradation over time on exposure to air (and water vapour) and storage, to give dimethylamine and formic acid impurities. In particular, dimethylamine can lead to unwanted deprotection of the fluorenylmethyloxycarbonyl (Fmoc) group during, for example, the initial loading of Fmoc amino acids in SPPS, which leads reduced calculated loading values. We have found that treatment of such aged DMF by simple sparging with an inert gas (N₂), or vacuum sonication, can regenerate the DMF in order to restore loading levels back to those found for newer, fresh, DMF samples.     

Synthesis and application of Nα‐Fmoc‐Nπ‐4‐methoxybenzyloxymethylhistidine in solid phase peptide synthesis

The 4‐methoxybenzyloxymethyl (MBom) group was introduced at the N^π‐position of the histidine (His) residue by using a regioselective procedure, and its utility was examined under standard conditions used for the conventional and the microwave (MW)‐assisted solid phase peptide synthesis (SPPS) with 9‐fluorenylmethyoxycarbonyl (Fmoc) chemistry. The N^π‐MBom group fulfilling the requirements for the Fmoc strategy was found to prevent side‐chain‐induced racemization during incorporation of the His residue even in the case of MW‐assisted SPPS performed at a high temperature. In particular, the MBom group proved to be a suitable protecting group for the convergent synthesis because it remains attached to the imidazole ring during detachment of the protected His‐containing peptide segments from acid‐sensitive linkers by treatment with a weak acid such as 1% trifluoroacetic acid in dichloromethane. We also demonstrated the facile synthesis of Fmoc‐His(π‐MBom)‐OH with the aid of purification procedure by crystallization to effectively remove the undesired τ‐isomer without resorting to silica gel column chromatography. This means that the present synthetic procedure can be used for large‐scale production without any obstacles. Copyright © 2012 European Peptide Society and John Wiley & Sons, Ltd.     

The aspartimide problem persists: Fluorenylmethyloxycarbonyl‐solid‐phase peptide synthesis (Fmoc‐SPPS) chain termination due to formation of N‐terminal piperazine‐2,5‐diones

Aspartimide (Asi) formation is a notorious side reaction in peptide synthesis that is well characterized and described in literature. In this context, we observed significant amounts of chain termination in Fmoc‐SPPS while synthesizing the N‐terminal Xaa‐Asp‐Yaa motif. This termination was caused by the formation of piperazine‐2,5‐diones. We investigated this side reaction using a linear model peptide and independently synthesizing its piperazine‐2,5‐dione derivative. Nuclear magnetic resonance (NMR) data of the side product present in the crude linear peptide proves that exclusively the six‐membered ring is formed whereas the theoretically conceivable seven‐membered 1,4‐diazepine‐2,5‐dione is not found. We propose a mechanism where nucleophilic attack of the N‐terminal amino function takes place at the α‐carbon of the carbonyl group of the corresponding Asi intermediate. In addition, we systematically investigated the impact of (a) different adjacent amino acid residues, (b) backbone protection, and (c) side chain protection of flanking amino acids. The side reaction is directly related to the Asi intermediate. Hence, hindering or avoiding Asi formation reduces or completely suppresses this side reaction.