Cloning of cellulose synthesis related genes from Acetobacter xylinum ATCC23769 and ATCC53582: comparison of cellulose synthetic ability between strains.

About 14.5 kb of DNA fragments from Acetobacter xylinum ATCC23769 and ATCC53582 were cloned, and their nucleotide sequences were determined. The sequenced DNA regions contained endo-beta-1,4-glucanase, cellulose complementing protein, cellulose synthase subunit AB, C, D and beta-glucosidase genes. The results from a homology search of deduced amino acid sequences between A. xylinum ATCC23769 and ATCC53582 showed that they were highly similar. However, the amount of cellulose production by ATCC53582 was 5 times larger than that of ATCC23769 during a 7-day incubation. In A. xylinum ATCC53582, synthesis of cellulose continued after glucose was consumed, suggesting that a metabolite of glucose, or a component of the medium other than glucose, may be a substrate of cellulose. On the other hand, cell growth of ATCC23769 was twice that of ATCC53582. Glucose is the energy source in A. xylinum as well as the substrate of cellulose synthesis, and the metabolic pathway of glucose in both strains may be different. These results suggest that the synthesis of cellulose and the growth of bacterial cells are contradictory.     

Role of water-soluble polysaccharides in bacterial cellulose production

Acetobacter xylinum BPR2001 produces water-insoluble bacterial cellulose (BC) and a water-soluble polysaccharide called acetan in corn steep liquor-fructose medium. Acetobacter xylinum EP1, which is incapable of acetan production was derived by disrupting the aceA gene of BPR2001. The BC production by EP1 (2.88 g/L) was lower than that by BPR2001 (4.6 g/L) in baffled-flask culture. When purified acetan or agar was added to the medium from the start of cultivation, the BC production by EP1 was enhanced and the final BC yield of EP1 was almost the same as that of BPR2001. A similar improvement of BC production by EP1 by the addition of agar was also confirmed by cultivation in a 50-L airlift reactor. From these results, the role of acetan in BC production is associated with the increase in the viscosity of the culture medium which may hinder coagulation of BC and cells in the culture, thereby accelerating the growth of BPR2001 and BC production by BPR2001.     

Acetobacter xylinum生产纤维素的最适培养基成分

探索出胶醋杆菌在摇瓶培养最适培养基成分为蛋白胨浓度１．０％、酵母膏０．５％、葡萄糖浓度２．０％、柠檬酸０．１１５％、乙醇１％、Ｎａ２ＨＰＯ４０．５％,ｐＨ６．０,１６０ｒ／ｍｉｎ的条件下进行摇瓶培养,细菌纤维素最大产量为７．５５ｇ／ｌ。     

The structure of cellulose-producing bacteria, Acetobacter xylinum and Acetobacter acetigenus.

The structure of the pellicles and cells of the cellulose-producing bacteria, Acetobacter xylinum and Acetobacter acetigenus, was studied by transmission electron microscopy of thin sections and freeze-etch replicas of glucose-stimulated cell suspensions, quiescent cell suspensions, and discrete pellicles. These bacteria have a relatively thin cell wall in section, with several irregular features superimposed on an otherwise simple, Gram-negative morphology. There are no flagella or pili. Unfixed, unextracted cells, viewed as whole mounts, show spherical or ellipsoidal bodies of undetermined composition which disappear after extraction with water or ethanol and propylene oxide. For both species, there are several kinds of cell surface irregularities, some of which are localized protrusions of the cell envelope. A variety of irregularities is seen frequently on cells in the first minutes of glucose incubation, on cells in a discrete pellicle, on quiescent cells, and on starved cells. Immediately after the addition of glucose to cellulose-free cells in suspension culture, fine fibrils appear on and (or) near the cell envelope. The fine fibrils are frequently as small as 3 nm in diameter in both freeze-etch and thin-section preparations and are frequently associated with freshly synthesized cellulose fibrils. Starved cells in suspensions free of (classical) microfibrils sometimes reveal stubs of an extracellular structure whose morphology resembles that of a nascent cellulose fibril.     

Electrically conductive bacterial cellulose by incorporation of carbon nanotubes

Electrically conducting polymeric membranes were prepared by incorporating multiwalled carbon nanotubes (MWCNTs) into bacterial cellulose pellicles produced by Gluconacetobacter xylinum. The MWCNTs were dispersed in a surfactant (cationic cetyl trimethylammonium bromide) solution, and cellulose pellicles were dipped into the solution for 6, 12, and 24 h. The surfactants were then extracted in pure water and dried. Electron microscopy showed that the individual MWCNTs were strongly adhered to the surface and the inside of the cellulose pellicle. The conductivity of the MWCNTs-incorporated cellulose pellicle, as measured by a four-probe at room temperature, was 1.4 x 10(-1) S/cm, based on the total cross-sectional area (approximately 9.6 wt % of MWCNTs). This suggests that the MWCNTs were incorporated uniformly and densely into the pellicles.     

Statistical analysis of optimal culture conditions for Gluconacetobacter hansenii cellulose production

AIM: The purpose of this study was to analyse the effects of different culture parameters on Gluconacetobacter hansenii (ATCC 10821) to determine which conditions provided optimum cellulose growth. METHODS AND RESULTS: Five culture factors were investigated: carbon source, addition of ethanol, inoculation ratio, pH and temperature. jmp Software (SAS, Cary, NC, USA) was used to design this experiment using a fractional factorial design. After 22 days of static culture, the cellulose produced by the bacteria was harvested, purified and dried to compare the cellulose yields. The results were analysed by fitting the data to a first-order model with two-factor interactions. CONCLUSIONS: The study confirmed that carbon source, addition of ethanol, and temperature were significant factors in the production of cellulose of this G. hansenii strain. While pH alone does not significantly affect average cellulose production, cellulose yields are affected by pH interaction with the carbon source. Culturing the bacteria on glucose at pH 6.5 produces more cellulose than at pH 5.5, while using mannitol at pH 5.5 produces more cellulose than at pH 6.5. The bacteria produced the most cellulose when cultured on mannitol, at pH 5.5, without ethanol, at 20 degrees C. Inoculation ratio was not found to be a significant factor or involved in any significant two-factor interaction. SIGNIFICANCE AND IMPACT OF THE STUDY: These findings give insight into the conditions necessary to maximize cellulose production from this G. hansenii strain. In addition, this work demonstrates how the fractional factorial design can be used to test a large number of factors using an abbreviated set of experiments. Fitting a statistical model determined the significant factors as well as the significant two-factor interactions.     

Factors affecting the yield and properties of bacterial cellulose

Acetobacter xylinum E₂₅ has been applied in our studies in order to find optimal culture conditions for effective bacterial cellulose (BC) production. The strain displays significantly higher stability in BC production under stationary culture conditions. In contrast, intensive agitation and aeration appear to drastically reduce cellulose synthesis since such conditions induced formation of spontaneous cellulose nonproducing mutants (Cel−), which dominated in the culture. Mutation frequency strictly depends on the medium composition in agitated cultures. Enrichment of the standard SH and Yamanaka media with 1% ethanol significantly enhanced BC production in stationary cultures. Horizontal fermentors equipped with rotating discs or rollers were successfully applied in order to improve culture conditions. Relatively slow rotation velocity (4 rpm) and large surface area enabling effective cell attachment are optimal parameters for cellulose production. Physical properties of BC samples synthesized either in stationary cultures or in a horizontal fermentor revealed that cellulose from stationary cultures demonstrated a much higher value of Young's modulus, but a much lower value of water-holding capacity. Journal of Industrial Microbiology & Biotechnology (2002) 29, 189–195 doi:10.1038/sj.jim.7000303 Received 01 March 2002/ Accepted in revised form 18 July 2002     

Towards a further understanding of the growth-inhibiting action of oxygen deficiency. Evaluation of the effect of antimycin on proliferating Ehrlich ascites tumour cells

The effect of 1 microM antimycin on the proliferative properties, metabolism and basic cell composition of Ehrlich ascites tumour cells cultured in the second in vitro passage was studied. Continuous drug exposure of asynchronous cells caused rapid cessation of cell growth, characterized by the cell number and DNA, RNA and protein content of cultures. Cells cease to consume oxygen and enhance their glycolytic activity. Uptake of labelled thymidine into acid-insoluble material was far below that of the controls, whereas incorporation of labelled uridine exceeded that of controls, as was also observed with other inhibitors of the respiratory chain (sodium cyanide, 2-thenoyltrifluoroacetone, or anaerobiosis). The influence of antimycin on cells at different stages of the cell cycle was tested using cells enriched in either G1, S or G2 phase by centrifugal elutriation. DNA histograms (flow cytometry) and pulse-labelling index curves gave detailed insight into cell-cycle progression of antimycin-treated cells: G1 and early S cells remained stationary; G2 cells still passed from G2 into mitosis to remain subsequently in a non-growing state in G1; S cells were either slowed or halted. Supplementation of antimycin-containing cultures with exogenous pyrimidine nucleosides stimulated reprogression of G1 cells without changing their ATP content. The results of the current experiments are interpreted as supporting the concept that growth cessation of G1 cells under respiratory insufficiency is not predominantly caused by impairment of respiratory phosphorylation but may be the consequence of a lack of precursors for DNA and RNA synthesis.     

Influence of different carbon sources on bacterial cellulose production by Gluconacetobacter xylinus strain ATCC 53524

Aims:  To determine the effect of carbon sources on cellulose produced by Gluconacetobacter xylinus strain ATCC 53524, and to characterize the purity and structural features of the cellulose produced.
Methods and Results:  Modified Hestrin Schramm medium containing the carbon sources mannitol, glucose, glycerol, fructose, sucrose or galactose were inoculated with Ga . xylinus strain ATCC 53524. Plate counts indicated that all carbon sources supported growth of the strain. Sucrose and glycerol gave the highest cellulose yields of 3·83 and 3·75 g l⁻¹ respectively after 96 h fermentation, primarily due to a surge in cellulose production in the last 12 h. Mannitol, fructose or glucose resulted in consistent rates of cellulose production and yields of >2·5 g l⁻¹. Solid state ¹³C CP/MAS NMR revealed that irrespective of the carbon source, the cellulose produced by ATCC 53524 was pure and highly crystalline. Scanning electron micrographs illustrated the densely packed network of cellulose fibres within the pellicles and that the different carbon sources did not markedly alter the micro-architecture of the resulting cellulose pellicles.
Conclusions:  The production rate of bacterial cellulose by Ga . xylinus (ATCC 53524) was influenced by different carbon sources, but the product formed was indistinguishable in molecular and microscopic features.
Significance and Impact of the Study:  Our studies for the first time examined the influence of different carbon sources on the rate of cellulose production by Ga . xylinus ATCC 53524, and the molecular and microscopic features of the cellulose produced.     

Influence of 1‐methylcyclopropene (1‐MCP) on the production of bacterial cellulose biosynthesized by Acetobacter xylinum under the agitated culture

Aims: Bacterial cellulose is an extracellular polysaccharide secreted by Acetobacter xylinum, which has become a novel material increasingly used in food and medical industries. However, its broad application is limited by its low yield and high cost. 1‐Methylcyclopropene (1‐MCP) is a potent inhibitor to either exogenous or endogenous ethylene during the biological senescence of plants, which has been broadly applied in commercial preservation of fruits and vegetables. The purpose of this study was to investigate the effects of 1‐MCP on both the growth of Acet.  xylinum and its cellulose production to demonstrate the potential enhancement of bacterial cellulose yield. Methods and Results: Three groups of samples were fermented under agitated culture with 125 rev min^?1 rotational speed. To the culture media, 0·14 mg of 1‐MCP contained in 100 mg dextrose powder was added on assigned days or on the first culture day only. Results from the measurement of bacterial cell concentration and bacterial cellulose yield at the end of a 12‐day culture demonstrated that cultures excluding 1‐MCP displayed a higher cell concentration and a lower cellulose production, while cultures containing 1‐MCP produced 15·6% more cellulose (1‐MCP added on day 1) and 25·4% (1‐MCP added on each assigned day) with less biomass. Conclusions: 1‐MCP was able to affect the growth of Acet. xylinum cells and resulted in increasing bacterial cellulose yield up to 25·4% over controls, which did not contain 1‐MCP. Significance and Impact of the Study: This was the first study to use the growth inhibitor of plants to investigate its effects on bacterial growth and production. It also demonstrated a significant enhancement of bacterial cellulose yield by the addition of 1‐MCP during the common agitated culture of Acet. xylinum.     

不同培养方式对细菌纤维素产量和结构性质的影响

考察了自行筛选的Acetobacter xylinum NUST4.2在静置培养和发酵罐培养获得的细菌纤维素(BC)的产量、基本结构和性能的差异。结果表明:静置培养时产纤维素7.5g/L,产率为0.052g/L/h,在机械搅拌发酵罐中培养3d产量达3.13g/L,产率达0.043g/L/h;SEM分析显示静置培养和发酵罐培养得到的纤维素均具有网状结构,但静置获得的纤维素丝带相互缠绕且层状重叠,更加致密,丝带更细;FT-IR分析知搅拌不改变纤维素的化学结构,但能减弱分子间氢键,和XRD结合分析可知静置培养的纤维素具有更高结晶指数,更高Iα含量和更大晶粒尺寸,但不改变晶型,仍为纤维素I型,说明搅拌会干扰纤维素初始纤丝的结晶,有利于形成更小的晶粒和较Iα稳定的Iβ。与棉纤维素相比,静置培养获得的纤维素的热稳定性更好,而发酵罐培养获得的纤维素则阻燃性更好。     

Isolation of osteogenic growth peptide from osteoblastic MC3T3 E1 cell cultures and demonstration of osteogenic growth peptide binding proteins

The osteogenic growth peptide (OGP) was recently characterized in regenerating bone marrow. In experimental animals it increases osteogenesis and hemopoiesis. In stromal cell cultures OGP stimulates proliferation, alkaline phosphatase activity, and matrix mineralization. OGP in high abundance is present in normal human and animal serum mainly complexed to OGP binding protein (OGPBP) or proteins. Here we show the presence of two OGPBPs, OGPBP-1, and OGPBP-2, in cultures of osteoblastic MC3T3 E1 cells. Immunoreactive OGP (irOGP) also accumulates in the medium of these cultures and in cultures of NIH 3T3 fibroblasts. A large amount of irOGP was released by heat inactivation of OGPBP-2 and purified by ultrafiltration and hydrophobic HPLC. The purified irOGP was identical to OGP obtained previously from rat regenerating bone marrow and human serum in terms of its amino acid sequence, immunoreactivity, and mitogenicity. Osteoblastic and fibroblastic cell proliferation can be arrested by anti-OGP antibodies and rescued by exogenous OGP, indicating that in the absence of serum or other exogenous growth stimulators the endogenously produced OGP is both necessary and sufficient for baseline proliferation. The OGP production is up- and down-regulated, respectively, by low and high doses and exogenous OGP in a manner consistent with an autoregulated feedback mechanism. The most effective OGP dose in MC3T3 E1 cells is at least two orders of magnitude lower than that in non-osteoblastic cell systems. This differential sensitivity of the osteoblastic cells could result in a preferential anabolic effect of OGP in bone. J. Cell. Biochem. 65:359–367. © 1997 Wiley-Liss, Inc.     

Cellulose production by Gluconacetobacter hansenii in a medium containing ethanol

The addition of 1% (v/v) ethanol to the basal medium inhibited growth of Gluconacetobacter hansenii but decreased the numbers of non-cellulose producing cells. Cellulose production increased 1.7 times to approx. 2.5 g l(-1) and showed a pattern of mixed growth-associated production. Microbial cells produced rigid pellicle-type bacterial cellulose as the shell of a large lump of bacterial cellulose like a static culture. The inoculum cultivated for 3 d maintained cellulose production by the fifth batch.     

Bioengineering bacterial cellulose/poly(ethylene oxide) nanocomposites

By adding poly(ethylene oxide) (PEO) to the growth medium of Acetobacter xylinum, finely dispersed bacterial cellulose (BC)/PEO nanocomposites were produced in a wide range of compositions and morphologies. As the BC/PEO w/w ratio increased from 15:85 to 59:41, the cellulose nanofibers became smaller but aggregated in larger bundles, indicating that PEO mixed with the cellulose on the nanometer scale. Fourier transform infrared spectroscopy suggested intermolecular hydrogen bonding and also preferred crystallization into cellulose Ibeta in the BC/PEO nanocomposites. The fine dispersion of cellulose nanofibers hindered the crystallization of PEO, lowering its melting point and crystallinity in the nanocomposites although remaining bacterial cell debris also contributed to the melting point depression. The decomposition temperature of PEO also increased by approximately 15 degrees C, and the tensile storage modulus of PEO improved significantly especially above 50 degrees C in the nanocomposites. It is argued that this integrated manufacturing approach to fiber-reinforced thermoplastic nanocomposites affords a good flexibility for tailoring morphology and properties. These results further pose the question of the necessity to remove bacterial cells to achieve desirable materials properties in biologically derived products.     

细菌纤维素生产菌株的分离和菌种初步鉴定

从长膜的醋醅中分离出一株发酵生产细菌纤维素产量较高且稳定的醋酸菌M12。根据《常见细菌系统鉴定手册》和《伯杰氏细菌鉴定手册》第九版,对醋酸菌M12进行了形态和生理生化特征的分析、测定了G＋Cmol％含量,初步鉴定该菌为醋化醋杆菌木质亚种（Acetobacter xylinum subsp.xylinum,又称木醋杆菌）。     

The effect of biotin on cellular functions in HeLa cells

HeLa cells cultured in a biotin-deficient medium show reduced rate of protein synthesis, DNA synthesis and growth. Addition of exogenous biotin to the cells cultured in biotin-deficient medium results in enhanced protein synthesis, DNA synthesis and cell growth. Continuous protein synthesis is required for the increase in DNA synthesis observed upon the addition of exogenous biotin to the cells cultured in biotin-deficient medium. These results suggest that cells cultured in biotin-deficient medium are arrested in the G1 stage of cell cycle and this block is removed upon the addition of biotin to the deficient medium.     

Cellulose biosynthesis and function in bacteria.

The current model of cellulose biogenesis in plants, as well as bacteria, holds that the membranous cellulose synthase complex polymerizes glucose moieties from UDP-Glc into beta-1,4-glucan chains which give rise to rigid crystalline fibrils upon extrusion at the outer surface of the cell. The distinct arrangement and degree of association of the polymerizing enzyme units presumably govern extracellular chain assembly in addition to the pattern and width of cellulose fibril deposition. Most evident for Acetobacter xylinum, polymerization and assembly appear to be tightly coupled. To date, only bacteria have been effectively studied at the biochemical and genetic levels. In A. xylinum, the cellulose synthase, composed of at least two structurally similar but functionally distinct subunits, is subject to a multicomponent regulatory system. Regulation is based on the novel nucleotide cyclic diguanylic acid, a positive allosteric effector, and the regulatory enzymes maintaining its intracellular turnover: diguanylate cyclase and Ca2(+)-sensitive bis-(3',5')-cyclic diguanylic acid (c-di-GMP) phosphodiesterase. Four genes have been isolated from A. xylinum which constitute the operon for cellulose synthesis. The second gene encodes the catalytic subunit of cellulose synthase; the functions of the other three gene products are still unknown. Exclusively an extracellular product, bacterial cellulose appears to fulfill diverse biological roles within the natural habitat, conferring mechanical, chemical, and physiological protection in A. xylinum and Sarcina ventriculi or facilitating cell adhesion during symbiotic or infectious interactions in Rhizobium and Agrobacterium species. A. xylinum is proving to be most amenable for industrial purposes, allowing the unique features of bacterial cellulose to be exploited for novel product applications.     

Intermediatry steps in Acetobacter xylinum cellulose synthesis: studies with whole cells and cell-free preparations of the wild type and a celluloseless mutant.

Intermediatry steps in cellulose synthesis in Acetobacter xylinum were studied with resting cells and particulate-membranous preparations of the wild-type strain and of a celluloseless mutant. Exogenously supplied [1-14C]glucose was rapidly converted by resting cells of both types into glucose 6-phosphate, glucose 1-phosphate, and uridine glucose 5'-diphosphate (UDP)-glucose and incorporated into lipid-, water-, and alkali-soluble cellular fractions. The decrease in the level of labeled hexose-phosphates and UDP-glucose upon depletion of the exogenous substrate was accounted for by a continuous incorporation of [14C]glucose into cellulose in the wild type and into the above-mentioned cellular components in the mutant. [14C]glucose retained in the alkali- and water-soluble fractions of pulse-labeled wild-type cells was quantitatively chased into cellulose. Sonic extracts of both strains catalyzed the transfer of glucose from UDP-glucose into lipid-, water-, and alkali-soluble materials, as well as into an alkali-insoluble cellulosic beta-1,4-glucan. The results strongly support the sequence glucose leads to glucose 6-phosphate leads to glucose 1-phosphate leads to UDP-glucose leads to cellulose and indicate that lipid- and protein-linked cellodextrins may function as intermediates between UDP-glucose and cellulose in A. xylinum.     

SYNTHESIS OF CELLULOSE BY ACETOBACTER XYLINUM : VIII. On the Formation and Orientation of Bacterial Cellulose Fibrils in the Presence of Acidic Polysaccharides

The transfer of the glucosyl moiety from uridine diphosphate glucose in the presence of Acetobacter xylinum cell-free extracts led to the formation of a mixture of alkali-soluble and -insoluble cellodextrins. Typical cellulose fibrils could not be detected by electron microscopy in this product. Immediately after release into the medium, cellulose formed by whole cells is in a "prefibrous" form which passes through Millipore filters of 0.45 and 0.8 µ pore diameter. Non-filtrable fibrils arise from this material probably by a process of crystallization involving no extracellular enzymes. Fibrils formed in shaken cell suspensions intertwine and form aggregates visible to the naked eye. In quiet suspensions pellicles are formed which float on the surface. Soluble Na-carboxymethylcellulose (CMC) is incorporated into cellulose fibrils formed in its presence, probably by a process of co-crystallization. Aggregation of fibrils containing CMC is delayed because of electrostatic repulsion between carboxylic groups. The aggregation time depends on the amount of CMC incorporated, its degree of substitution, the pH of the medium, and the ionic strength. The amount of CMC incorporated depends on the relative concentration CMC/cellulose and on the similarity of the CMC and the cellulose molecules i.e. in molecular weight and the number of carboxyl substitutions. Cellulose pellicles formed in the presence of CMC by unshaken cell suspensions consist of crossed, superimposed layers of parallel oriented cellulose fibrils. The same phenomenon is observed when phosphomannan, but not levan, is substituted for CMC. The biogenesis of oriented cellulose fibrils is envisaged as a process comprising the following steps: polymerization of the monomeric precursor, diffusion of the molecule to crystallization sites, crystallization, and orientation. It is proposed that charged polysaccharides play a role similar to that of CMC in affecting the orientation of cellulose fibrils in the plant cell wall.     

Degradation and utilization of cellulose and straw by three different anaerobic fungi from the ovine rumen

Three different ruminal fungi, a Neocallimastix sp. (strain LM-1), a Piromonas sp. (strain SM-1), and a Sphaeromonas sp. (strain NM-1), were grown anaerobically in liquid media which contained a suspension of either 1% (wt/vol) purified cellulose or finely milled wheat straw as the source of fermentable carbon. Fungal biomass was estimated by using cell wall chitin or cellular protein in cellulose cultures and chitin in straw cultures. Both strains LM-1 and SM-1 degraded cellulose with a concomitant increase in fungal biomass. Maximum growth of both fungi occurred after incubation for 4 days, and the final yield of protein was the same for both fungi. Cellulose degradation continued after growth ceased. Strain NM-1 failed to grow in the cellulose medium. All three anaerobic fungi grew in the straw-containing medium, and loss of dry weight from the cultures indicated degradation of straw to various degrees (LM-1 greater than SM-1 greater than NM-1). The total fiber component and the cellulose component of the straw were degraded in similar proportions, but the lignin component remained undegraded by any of the fungi. Maximum growth yield on straw occurred after 4 days for strain LM-1 and after 5 days for strains SM-1 and NM-1. The calculated yield of cellular protein for strain LM-1 was twice that of both strains SM-1 and NM-1. The cellular protein yield of strain SM-1 was the same in both cellulose and straw cultures. In contrast to cellulose, straw degradation ceased after the end of the growth phase.(ABSTRACT TRUNCATED AT 250 WORDS)