基于Illumina RNA-Seq短序列的转录组从头组装软件比较与优化

利用公共数据库中果蝇F1代和栽培水稻基于高通量Illumina测序平台的RNA-Seq短序列数据,比较了8个(ABySS,Velvet,SOAPdenovo,Oases,Trinity,Multiple-k,T-IDBA and Trans-ABySS)转录组从头组装软件.结果显示,在基于单一k-mer和多重k-mer方法的两类软件中,Trinity和Trans-ABySS分别表现出最好的组装性能,而其它软件性能比较接近.我们还发现基于多重k-mer比单一k-mer可以组装获得更多的总碱基数目,但是即使利用最好的多重k-mer组装软件,所获得的数据质量也比研究人员所期望的要低.鉴于此,我们提出了“ETM”优化方法,将多重k-mer方法组合到Trinity中,使其在具有最好的组装性能的基础上兼具了多重k-mer的优势,测试结果显示了该方法具有一定的优越性.我们的研究结果为用户选择合适的软件提供了依据,对推动基于高通量Illumina测序的转录组研究具有重要意义.     

FIND:从下一代单端测序数据中快速查找Indel的方法

目的:针对下一代测序数据,尤其是单端测序数据,研究快速、准确查找Indel的方法。方法:先与全基因组参考序列进行快速比对,筛选出包含Indel的序列;再对这些序列进行双向的二次比对,确定Indel长度;最后借助长度信息在锁定范围内查找Indel的确切位置和相关信息。结果:本文成功构建FIND(Fast INDel detection system)系统,用于从单端测序数据中查找Indel信息。以模拟测序数据作为测试数据,在12X测试数据情况下,FIND的灵敏度和特异性分别为87.71%和99.66%,而且该性能还随着测序倍数的增加而提升。结论:充分利用比对过程获取的信息,在确定Indle长度的同时也确定出其大致位置,最终在局部范围内实现对单端测序数据中Indle的快速而准确的查找。     

Optimizing Information in Next-Generation-Sequencing (NGS) Reads for Improving De Novo Genome Assembly

Next-Generation-Sequencing is advantageous because of its much higher data throughput and much lower cost compared with the traditional Sanger method. However, NGS reads are shorter than Sanger reads, making de novo genome assembly very challenging. Because genome assembly is essential for all downstream biological studies, great efforts have been made to enhance the completeness of genome assembly, which requires the presence of long reads or long distance information. To improve de novo genome assembly, we develop a computational program, ARF-PE, to increase the length of Illumina reads. ARF-PE takes as input Illumina paired-end (PE) reads and recovers the original DNA fragments from which two ends the paired reads are obtained. On the PE data of four bacteria, ARF-PE recovered >87% of the DNA fragments and achieved >98% of perfect DNA fragment recovery. Using Velvet, SOAPdenovo, Newbler, and CABOG, we evaluated the benefits of recovered DNA fragments to genome assembly. For all four bacteria, the recovered DNA fragments increased the assembly contiguity. For example, the N50 lengths of the P. brasiliensis contigs assembled by SOAPdenovo and Newbler increased from 80,524 bp to 166,573 bp and from 80,655 bp to 193,388 bp, respectively. ARF-PE also increased assembly accuracy in many cases. On the PE data of two fungi and a human chromosome, ARF-PE doubled and tripled the N50 length. However, the assembly accuracies dropped, but still remained >91%. In general, ARF-PE can increase both assembly contiguity and accuracy for bacterial genomes. For complex eukaryotic genomes, ARF-PE is promising because it raises assembly contiguity. But future error correction is needed for ARF-PE to also increase the assembly accuracy. ARF-PE is freely available at http://140.116.235.124/~tliu/arf-pe/.     

De Novo Assembly of the Complete Genome of an Enhanced Electricity-Producing Variant of Geobacter sulfurreducens Using Only Short Reads

State-of-the-art DNA sequencing technologies are transforming the life sciences due to their ability to generate nucleotide sequence information with a speed and quantity that is unapproachable with traditional Sanger sequencing. Genome sequencing is a principal application of this technology, where the ultimate goal is the full and complete sequence of the organism of interest. Due to the nature of the raw data produced by these technologies, a full genomic sequence attained without the aid of Sanger sequencing has yet to be demonstrated.We have successfully developed a four-phase strategy for using only next-generation sequencing technologies (Illumina and 454) to assemble a complete microbial genome de novo. We applied this approach to completely assemble the 3.7 Mb genome of a rare Geobacter variant (KN400) that is capable of unprecedented current production at an electrode. Two key components of our strategy enabled us to achieve this result. First, we integrated the two data types early in the process to maximally leverage their complementary characteristics. And second, we used the output of different short read assembly programs in such a way so as to leverage the complementary nature of their different underlying algorithms or of their different implementations of the same underlying algorithm.The significance of our result is that it demonstrates a general approach for maximizing the efficiency and success of genome assembly projects as new sequencing technologies and new assembly algorithms are introduced. The general approach is a meta strategy, wherein sequencing data are integrated as early as possible and in particular ways and wherein multiple assembly algorithms are judiciously applied such that the deficiencies in one are complemented by another.     

GPU-BSM: A GPU-Based Tool to Map Bisulfite-Treated Reads

Cytosine DNA methylation is an epigenetic mark implicated in several biological processes. Bisulfite treatment of DNA is acknowledged as the gold standard technique to study methylation. This technique introduces changes in the genomic DNA by converting cytosines to uracils while 5-methylcytosines remain nonreactive. During PCR amplification 5-methylcytosines are amplified as cytosine, whereas uracils and thymines as thymine. To detect the methylation levels, reads treated with the bisulfite must be aligned against a reference genome. Mapping these reads to a reference genome represents a significant computational challenge mainly due to the increased search space and the loss of information introduced by the treatment. To deal with this computational challenge we devised GPU-BSM, a tool based on modern Graphics Processing Units. Graphics Processing Units are hardware accelerators that are increasingly being used successfully to accelerate general-purpose scientific applications. GPU-BSM is a tool able to map bisulfite-treated reads from whole genome bisulfite sequencing and reduced representation bisulfite sequencing, and to estimate methylation levels, with the goal of detecting methylation. Due to the massive parallelization obtained by exploiting graphics cards, GPU-BSM aligns bisulfite-treated reads faster than other cutting-edge solutions, while outperforming most of them in terms of unique mapped reads.     

A Bayesian Assignment Method for Ambiguous Bisulfite Short Reads

DNA methylation is an epigenetic modification critical for normal development and diseases. The determination of genome-wide DNA methylation at single-nucleotide resolution is made possible by sequencing bisulfite treated DNA with next generation high-throughput sequencing. However, aligning bisulfite short reads to a reference genome remains challenging as only a limited proportion of them (around 50–70%) can be aligned uniquely; a significant proportion, known as multireads, are mapped to multiple locations and thus discarded from downstream analyses, causing financial waste and biased methylation inference. To address this issue, we develop a Bayesian model that assigns multireads to their most likely locations based on the posterior probability derived from information hidden in uniquely aligned reads. Analyses of both simulated data and real hairpin bisulfite sequencing data show that our method can effectively assign approximately 70% of the multireads to their best locations with up to 90% accuracy, leading to a significant increase in the overall mapping efficiency. Moreover, the assignment model shows robust performance with low coverage depth, making it particularly attractive considering the prohibitive cost of bisulfite sequencing. Additionally, results show that longer reads help improve the performance of the assignment model. The assignment model is also robust to varying degrees of methylation and varying sequencing error rates. Finally, incorporating prior knowledge on mutation rate and context specific methylation level into the assignment model increases inference accuracy. The assignment model is implemented in the BAM-ABS package and freely available at https://github.com/zhanglabvt/BAM_ABS.     

Hybrid De Novo Genome Assembly Using MiSeq and SOLiD Short Read Data

A hybrid de novo assembly pipeline was constructed to utilize both MiSeq and SOLiD short read data in combination in the assembly. The short read data were converted to a standard format of the pipeline, and were supplied to the pipeline components such as ABySS and SOAPdenovo. The assembly pipeline proceeded through several stages, and either MiSeq paired-end data, SOLiD mate-paired data, or both of them could be specified as input data at each stage separately. The pipeline was examined on the filamentous fungus Aspergillus oryzae RIB40, by aligning the assembly results against the reference sequences. Using both the MiSeq and the SOLiD data in the hybrid assembly, the alignment length was improved by a factor of 3 to 8, compared with the assemblies using either one of the data types. The number of the reproduced gene cluster regions encoding secondary metabolite biosyntheses (SMB) was also improved by the hybrid assemblies. These results imply that the MiSeq data with long read length are essential to construct accurate nucleotide sequences, while the SOLiD mate-paired reads with long insertion length enhance long-range arrangements of the sequences. The pipeline was also tested on the actinomycete Streptomyces avermitilis MA-4680, whose gene is known to have high-GC content. Although the quality of the SOLiD reads was too low to perform any meaningful assemblies by themselves, the alignment length to the reference was improved by a factor of 2, compared with the assembly using only the MiSeq data.     

IM-TORNADO: A Tool for Comparison of 16S Reads from Paired-End Libraries

Motivation

16S rDNA hypervariable tag sequencing has become the de facto method for accessing microbial diversity. Illumina paired-end sequencing, which produces two separate reads for each DNA fragment, has become the platform of choice for this application. However, when the two reads do not overlap, existing computational pipelines analyze data from read separately and underutilize the information contained in the paired-end reads.

Results

We created a workflow known as Illinois Mayo Taxon Organization from RNA Dataset Operations (IM-TORNADO) for processing non-overlapping reads while retaining maximal information content. Using synthetic mock datasets, we show that the use of both reads produced answers with greater correlation to those from full length 16S rDNA when looking at taxonomy, phylogeny, and beta-diversity.

Availability and Implementation

IM-TORNADO is freely available at http://sourceforge.net/projects/imtornado and produces BIOM format output for cross compatibility with other pipelines such as QIIME, mothur, and phyloseq.     

SHRiMP: Accurate Mapping of Short Color-space Reads

The development of Next Generation Sequencing technologies, capable of sequencing hundreds of millions of short reads (25–70 bp each) in a single run, is opening the door to population genomic studies of non-model species. In this paper we present SHRiMP - the SHort Read Mapping Package: a set of algorithms and methods to map short reads to a genome, even in the presence of a large amount of polymorphism. Our method is based upon a fast read mapping technique, separate thorough alignment methods for regular letter-space as well as AB SOLiD (color-space) reads, and a statistical model for false positive hits. We use SHRiMP to map reads from a newly sequenced Ciona savignyi individual to the reference genome. We demonstrate that SHRiMP can accurately map reads to this highly polymorphic genome, while confirming high heterozygosity of C. savignyi in this second individual. SHRiMP is freely available at http://compbio.cs.toronto.edu/shrimp.     

ABRF-PRG05: De Novo Peptide Sequence Determination

A common request of proteomics core facilities is protein identification. However, in some instances primary sequence information for the protein in question is not present in public databases. In other cases, the amino acid sequence of a protein may differ in some way from the sequence predicted from the gene sequence in a database as a result of gene mutation, gene splicing, and/or multiple posttranslational modifications. Thus, it may be necessary to determine the sequence of one or more peptides de novo in order to identify and/or adequately characterize the protein of interest. The primary goal of this study was to give participating laboratories an opportunity to evaluate their proficiency in sequencing unknown peptides that are not included in any published database. Samples containing 3–6 pmol each of five synthetic peptides with amino acid sequences that were not present in public databases were sent to 106 laboratories. One nonstandard amino acid was present in one of the peptides. From a comparison of the results obtained by different strategies, participating laboratories will be able to gauge their own capabilities and establish realistic expectations for the approaches that can be used for this determination.