Enthalpy measurement using calorimetry shows a significant difference in potential energy between the active and latent conformations of PAI-1

A central feature of the serpin inhibition mechanism is insertion of the reactive center loop into the central beta-sheet (beta-sheet A). This insertion also occurs when the reactive center loop is cleaved without protease inhibition. Using this effect, we have measured the enthalpy (DeltaH) of loop cleavage and insertion for plasminogen activator inhibitor 1 (PAI-1) as -38 kcal/mol. Because loop insertion can be blocked by incorporating a peptide into the central beta-sheet, it was possible to assign -7 kcal/mol to loop cleavage and -31 kcal/mol to loop insertion. These values are lower than values reported for the serpins alpha 1 -proteinase inhibitor and antithrombin of -53 to -63 kcal/mol, respectively, for loop insertion with negligible enthalpy for loop cleavage. A free energy difference of -9 kcal/mol has been reported between the active and spontaneously loop inserted "latent forms" of PAI-1, which is significantly smaller in magnitude than the -31 kcal/mol of enthalpy we measured for loop insertion. Because the enthalpy should relate closely to those regions of PAI-1 that have moved to lower potential energy, a difference distance matrix is presented that identifies regions of PAI-1 that move during loop insertion.     

Structural factors affecting the choice between latency transition and polymerization in inhibitory serpins

Plasminogen activator inhibitor-1 (PAI-1), a member of the serine protease inhibitor (serpin) protein family, is unique among the serpins in its conformational lability. This lability allows spontaneous conversion of the active form to a more stable, latent conformation under physiological conditions. In other serpins, polymerization, rather than latency transition, is induced under pathological conditions or upon heat treatment. To identify specific factors promoting latency conversion in PAI-1, we mutated PAI-1 at various positions and compared the effects with those of equivalent mutations in alpha(1)-antitrypsin, the archetypal serpin. Mutations that improved interactions with the turn between helix F and the third strand of beta-sheet A (thFs3A) or the fifth strand of beta-sheet A (s5A), which are near the site of latency transition-associated insertion of the reactive center loop, retarded latency conversion but did not greatly increase structural stability. Mutations that decreased interactions with s2C facilitated conformational conversion, possibly by releasing the reactive center loop from beta-sheet C. Mutations of Thr93 that filled a hydrophobic surface pocket on s2A dramatically increased structural stability but had a negligible effect on the conformational transition. Our results suggest that the structural features controlling latency transition in PAI-1 are highly localized, whereas the conformational strain of the native forms of other inhibitory serpins is distributed throughout the molecule and induces polymerization.     

The length of the reactive center loop modulates the latency transition of plasminogen activator inhibitor-1

Plasminogen activator inhibitor-1 (PAI-1) belongs to the serine protease inhibitor (serpin) protein family, which has a common tertiary structure consisting of three beta-sheets and several alpha-helices. Despite the similarity of its structure with those of other serpins, PAI-1 is unique in its conformational lability, which allows the conversion of the metastable active form to a more stable latent conformation under physiological conditions. For the conformational conversion to occur, the reactive center loop (RCL) of PAI-1 must be mobilized and inserted into the major beta-sheet, A sheet. In an effort to understand how the structural conversion is regulated in this conformationally labile serpin, we modulated the length of the RCL of PAI-1. We show that releasing the constraint on the RCL by extension of the loop facilitates a conformational transition of PAI-1 to a stable state. Biochemical data strongly suggest that the stabilization of the transformed conformation is owing to the insertion of the RCL into A beta-sheet, as in the known latent form. In contrast, reducing the loop length drastically retards the conformational change. The results clearly show that the constraint on the RCL is a factor that regulates the conformational transition of PAI-1.     

Specific interactions of serpins in their native forms attenuate their conformational transitions

Plasminogen activator inhibitor-1 (PAI-1) belongs to the serine protease inhibitor (serpin) protein superfamily. Serpins are unique in that their native forms are not the most thermodynamically stable conformation; instead, a more stable, latent conformation exists. During the transition to the latent form, the first strand of beta-sheet C (s1C) in the serpin is peeled away from the beta-sheet, and the reactive center loop (RCL) is inserted into beta-sheet A, rendering the serpin inactive. To elucidate the contribution of specific interactions in the metastable native form to the latency transition, we examined the effect of mutations at the s1C of PAI-1, specifically in positions P4' through P10'. Several mutations strengthened the interactions between these residues and the core protein, and slowed the transition of the protein from the metastable native form to the latent form. In particular, anchoring of the strand to the protein's hydrophobic core at the beginning (P4' site) and center of the strand (P8' site) greatly retarded the latency transition. Mutations that weakened the interactions at the s1C region facilitated the conformational conversion of the protein to the latent form. PAI-1's overall structural stability was largely unchanged by the mutations, as evaluated by urea-induced equilibrium unfolding monitored via fluorescence emission. Therefore, the mutations likely exerted their effects by modulating the height of the energy barrier from the native to the latent form. Our results show that interactions found only in the metastable native form of serpins are important structural features that attenuate folding of the proteins into their latent forms.     

The reactive-center loop of active PAI-1 is folded close to the protein core and can be partially inserted

Plasminogen activator inhibitor 1 (PAI-1) is the main inhibitor of plasminogen activators and plays an important role in many pathophysiological processes. Like other members of the serpin family, PAI-1 has a reactive center consisting of a mobile loop (RCL) with P1 and P1' residues acting as a "bait" for cognate protease. In contrast to the other serpins, PAI-1 loses activity by spontaneous conversion to an inactive latent form. This involves full insertion of the RCL into beta-sheet A. To search for molecular determinants that could be responsible for conversion of PAI-1 to the latent form, we studied the conformation of the RCL in active PAI-1 in solution. Intramolecular distance measurements by donor-donor energy migration and probe quenching methods reveal that the RCL is located much closer to the core of PAI-1 than has been suggested by the recently resolved X-ray structures of stable PAI-1 mutants. Disulfide bonds can be formed in double-cysteine mutants with substitutions at positions P11 or P13 of the RCL and neighboring residues in beta-sheet A. This suggests that the RCL may be preinserted up to residue P13 in active PAI-1, and possibly even to residue P11. We propose that the close proximity of the RCL to the protein core, and the ability of the loop to preinsert into beta-sheet A is a possible reason for PAI-1 being able to convert spontaneously to its latent form.     

Fluorescence correlation spectroscopic study of serpin depolymerization by computationally designed peptides

Members of the serine proteinase inhibitor (serpin) family play important roles in the inflammatory and coagulation cascades. Interaction of a serpin with its target proteinase induces a large conformational change, resulting in insertion of its reactive center loop (RCL) into the main body of the protein as a new strand within beta-sheet A. Intermolecular insertion of the RCL of one serpin molecule into the beta-sheet A of another leads to polymerization, a widespread phenomenon associated with a general class of diseases known as serpinopathies. Small peptides are known to modulate the polymerization process by binding within beta-sheet A. Here, we use fluorescence correlation spectroscopy (FCS) to probe the mechanism of peptide modulation of alpha(1)-antitrypsin (alpha(1)-AT) polymerization and depolymerization, and employ a statistical computationally-assisted design strategy (SCADS) to identify new tetrapeptides that modulate polymerization. Our results demonstrate that peptide-induced depolymerization takes place via a heterogeneous, multi-step process that begins with internal fragmentation of the polymer chain. One of the designed tetrapeptides is the most potent antitrypsin depolymerizer yet found.     

Mutation of the highly conserved tryptophan in the serpin breach region alters the inhibitory mechanism of plasminogen activator inhibitor-1

We have demonstrated that interactions within the conserved serpin breach region play a direct role in the critical step of the serpin reaction in which the acyl-enzyme intermediate must first be exposed to hydrolyzing water and aqueous deacylation. Substitution of the breach tryptophan in PAI-1 (Trp175), a residue found in virtually all known serpins, with phenylalanine altered the kinetics of the reaction mechanism and impeded the ability of PAI-1 to spontaneously become latent without compromising the inherent rate of cleaved loop insertion or partitioning between the final inhibited serpin-proteinase complex and hydrolyzed serpin. Kinetic dissection of the PAI-1 inhibitory mechanism using multiple target proteinases made possible the identification of a single rate-limiting intermediate step coupled to the molecular interactions within the breach region. This step involves the initial insertion of the proximal reactive center loop hinge residue(s) into beta-sheet A and facilitates translocation of the distal P'-side of the cleaved reactive center loop from the substrate cleft of the proteinase. Substitution of the tryptophan residue raised the kinetic barrier restricting the initial loop insertion event, significantly retarding the rate-limiting step in tPA reactions in which strong exosite interactions must be overcome for the reaction to proceed.     

Extending the capabilities of targeted molecular dynamics: simulation of a large conformational transition in plasminogen activator inhibitor 1

Plasminogen activator inhibitor type 1 (PAI-1) is an inhibitor of plasminogen activators such as tissue-type plasminogen activator or urokinase-type plasminogen activator. For this molecule, different conformations are known. The inhibiting form that interacts with the proteinases is called the active form. The noninhibitory, noncleavable form is called the latent form. X-ray and modeling studies have revealed a large change in position of the reactive center loop (RCL), responsible for the interaction with the proteinases, that is inserted into a beta-sheet (s4A) in the latent form. The mechanism underlying this spontaneous conformational change (half-life = 2 h at 37 degrees C) is not known in detail. This investigation attempts to predict a transition path from the active to the latent structure at the atomic level, by using simulation techniques. Together with targeted molecular dynamics (TMD), a plausible assumption on a rigid body movement of the RCL was applied to define an initial guess for an intermediate. Different pathways were simulated, from the active to the intermediate, from the intermediate to the latent structure and vice versa under different conditions. Equilibrium simulations at different steps of the path also were performed. The results show that a continuous pathway from the active to the latent structure can be modeled. This study also shows that this approach may be applied in general to model large conformational changes in any kind of protein for which the initial and final three-dimensional structure is known.     

Polymerization of plasminogen activator inhibitor-1

The activity of the serine proteinase inhibitor (serpin) plasminogen activator inhibitor-1 (PAI-1) is controlled by the intramolecular incorporation of the reactive loop into beta-sheet A with the generation of an inactive latent species. Other members of the serpin superfamily can be pathologically inactivated by intermolecular linkage between the reactive loop of one molecule and beta-sheet A of a second to form chains of polymers associated with diverse diseases. It has long been believed that PAI-1 is unique among active serpins in that it does not form polymers. We show here that recombinant native and latent PAI-1 spontaneously form polymers in vitro at low pH although with distinctly different electrophoretic patterns of polymerization. The polymers of both the native and latent species differ from the typical loop-A-sheet polymers of other serpins in that they readily dissociate back to their original monomeric form. The findings with PAI-1 are compatible with different mechanisms of linkage, each involving beta-strand addition of the reactive loop to s7A in native PAI-1 and to s1C in latent PAI-1. Glycosylated native and latent PAI-1 can also form polymers under similar conditions, which may be of in vivo importance in the low pH environment of the platelet.     

A concerted structural transition in the plasminogen activator inhibitor-1 mechanism of inhibition

The inhibition mechanism of serpins requires a change in structure to entrap the target proteinase as a stable acyl-enzyme complex. Although it has generally been assumed that reactive center loop insertion and associated conformational change proceeds in a concerted manner, this has not been demonstrated directly. Through the substitution of tryptophan with 7-azatryptophan and an analysis of transient reaction kinetics, we have described the formation of an inhibited serpin-proteinase complex as a single concerted transition of the serpin structure. Replacement of the four tryptophans of plasminogen activator inhibitor type-1 (PAI-1) with the spectrally unique analogue 7-azatryptophan permitted observations of conformational changes in the serpin but not those of the proteinase. Formation of covalent acyl-enzyme complexes, but not noncovalent Michaelis complexes, with tissue-type plasminogen activator (t-PA) or urokinase (u-PA) resulted in rapid decreases of fluorescence coinciding with insertion of the reactive center loop and expansion of beta-sheet A. Insertion of an octapeptide consisting of the P14-P7 residues of the reactive center loop into beta-sheet A produced the same conformational change in serpin structure measured by 7-azatryptophan fluorescence, suggesting that introduction of the proximal loop residues induces the structural rearrangement of the serpin molecule. The atom specific modification of the tryptophan indole rings through analogue substitution produced a proteinase specific effect on function. The reduced inhibitory activity of PAI-1 against t-PA but not u-PA suggested that the mechanism of loop insertion is sensitive to the intramolecular interactions of one or more tryptophan residues.     

Comparative analysis of the proteinase specificity in wild-type and stabilized plasminogen activator inhibitor-1: evidence for contribution of intramolecular flexibility

PAI-1, the physiological inhibitor of tissue-type and urokinase-type plasminogen activator, is a unique member of the serpins as it exists in three distinct conformations: an active inhibitory conformation, a non-inhibitory substrate conformation, and a non-reactive latent conformation. Proline substitution of single residues in the P16-P20 region (situated at the proximal hinge of the reactive site loop) of wild-type PAI-1 (wtPAI-1) and a stabilized PAI-1-variant (PAI-1-stab; N150H, K154T, Q301P, Q319L, and M354I, t(1/2)=150), respectively, resulted in two series of PAI-1-variants with different properties. In wtPAI-1 only substitution at P18 resulted in a pronounced u-PA specificity and substrate behaviour towards t-PA. In contrast, in PAI-1-stab substitution at either P18, P19 or P20 resulted in a u-PA specificity and a significantly increased substrate behaviour towards t-PA and u-PA. Importantly, analysis of the kinetics of inhibition did not reveal any differences in the second-order rate constants of inhibition (k approximately 10(7)M(-1)s(-1)). The pronounced differences observed for identical mutations in wtPAI-1 vs PAI-1-stab demonstrate that not merely the sequence of the reactive loop but also intramolecular interactions between the hF/s3A-loop and the main part of the molecule govern the functional and conformational behaviour of PAI-1.     

Accelerated conversion of human plasminogen activator inhibitor-1 to its latent form by antibody binding.

The serpin plasminogen activator inhibitor-1 (PAI-1) slowly converts to an inactive latent form by inserting a major part of its reactive center loop (RCL) into its beta-sheet A. A murine monoclonal antibody (MA-33B8), raised against the human plasminogen activator (tPA).PAI-1 complex, rapidly inactivates PAI-1. Results presented here indicate that MA-33B8 induces acceleration of the active-to-latent conversion. The antibody-induced inactivation of PAI-1 labeled with the fluorescent probe N, N'-dimethyl-N-(acetyl)-N'-(7-nitrobenz-2-oxa-1,3-diazol-4-yl) ethylene diamine (NBD) at P9 in the RCL caused a fluorescence enhancement and shift identical to those accompanying the spontaneous conversion of the P9.NBD PAI-1 to the latent form. Like latent PAI-1, antibody-inactivated PAI-1 was protected from cleavage by elastase. The rate constants for MA-33B8 binding, measured by NBD fluorescence or inactivation, were similar (1.3-1.8 x 10(4) M-1 s-1), resulting in a 4000-fold faster inactivation at 4.2 microM antibody binding sites. The apparent antibody binding rate constant, at least 1000 times slower than one limited by diffusion, indicates that exposure of its epitope depends on an unfavorable equilibrium of PAI-1. Our observations are consistent with this idea and suggest that the equilibrium involves partial insertion of the RCL into sheet A: latent, RCL-cleaved, and tPA-complexed PAI-1, which are inactive loop-inserted forms, bound much faster than active PAI-1 to MA-33B8, whereas two loop-extracted forms of PAI-1, modified to prevent loop insertion, did not bind or bound much more weakly to the antibody.     

High-resolution structure of the stable plasminogen activator inhibitor type-1 variant 14-1B in its proteinase-cleaved form: a new tool for detailed interaction studies and modeling

Wild-type plasminogen activator inhibitor type-1 (PAI-1) rapidly converts to the inactive latent state under conditions of physiological pH and temperature. For in vivo studies of active PAI-1 in cell culture and in vivo model systems, the 14-1B PAI-1 mutant (N150H-K154T-Q319L-M354I), with its stabilized active conformation, has thus become the PAI-1 of choice. As a consequence of the increased stability, the only two forms likely to be encountered are the active or the cleaved form, the latter either free or complexed with target proteinase. We hereby report the first structure of the stable 14-1B PAI-1 variant in its reactive center cleaved form, to a resolution of 2.0 A. The >99% complete structure represents the highest resolved structure of free cleaved PAI-1. This high-resolution structure should be of great use for drug target development and for modeling protein-protein interactions such as those of PAI-1 with vitronectin.     

Engineering of conformations of plasminogen activator inhibitor-1. A crucial role of beta-strand 5A residues in the transition of active form to latent and substrate forms.

The serpin (serine proteinase inhibitor) family is of general protein chemical interest because of its ability to undergo large conformational changes, in which the surface-exposed reactive centre loop (RCL) is inserted as strand 4 in the large central beta-sheet A. Loop insertion is an integral part of the inhibitory mechanism and also takes place at conversion of serpins to the latent state, occurring spontaneously only in plasminogen activator inhibitor-1 (PAI-1). We have investigated the importance of beta-strand 5A residues for the activity and latency transition of PAI-1. An approximately fourfold increase in the rate of latency transition resulted from His-substitution of Gln324 (position 334 in the alpha(1)-proteinase inhibitor template numbering), which interacts with the underlying alpha-helix B. The side chains of Gln321 and Lys325 (template residues 331 and 335, respectively) form hydrogen bonds to the peptide backbone of a loop connecting alpha-helix F and beta-strand 3A. While substitution with Ala of Glu321 had only minor effects on the properties of PAI-1, substitution with Ala of Lys325 led to stabilization of the inhibitory activity at incubation conditions leading to conversion of wild-type PAI-1 to a substrate form, and to an anomalous reaction towards a monoclonal antibody, which induced a delay in the latency transition of the mutant, but not wild-type PAI-1. We conclude that the anchoring of beta-strand 5A plays a crucial role in loop insertion. These findings provide new information about the mechanism of an important example of protein conformational changes.     

Mapping of a conformational epitope on plasminogen activator inhibitor-1 by random mutagenesis. Implications for serpin function

The mechanism for the conversion of plasminogen activator inhibitor-1 (PAI-1) from the active to the latent conformation is not well understood. Recently, a monoclonal antibody, 33B8, was described that rapidly converts PAI-1 to the latent conformation (Verhamme, I., Kvassman, J. O., Day, D., Debrock, S., Vleugels, N., Declerck, P. J., and Shore, J. D. (1999) J. Biol. Chem. 274, 17511-17517). In an attempt to understand this interaction, and more broadly to understand the mechanism of the natural transition of PAI-1 to the latent conformation, we have used random mutagenesis to identify the 33B8 epitope in PAI-1. This site involves at least 8 amino acids scattered over more than two-thirds of the linear sequence that form a compact epitope on the PAI-1 three-dimensional structure. Surface plasmon resonance studies indicate a high affinity interaction between latent PAI-1 and 33B8 that is approximately 100-fold higher than comparable binding to active PAI-1. Structural modeling results together with surface plasmon resonance analysis of parental and site-directed PAI-1 mutants with disrupted 33B8 binding suggest the existence of a specific PAI-1 intermediate structure that is stabilized by 33B8 binding. These analyses strongly suggest that this intermediate form of PAI-1 has a partial insertion of the reactive center loop into beta-sheet A, and together, these data have significant implications for the general serpin mechanism of proteinase inhibition.     

S-ovalbumin, an ovalbumin conformer with properties analogous to those of loop-inserted serpins.

Most serpins are inhibitors of serine proteinases and are thought to undergo a conformational change upon complex formation with proteinase that involves partial insertion of the reactive center loop into a beta-sheet of the inhibitor. Ovalbumin, although a serpin, is not an inhibitor of serine proteinases. It has been proposed that this deficiency arises from the presence of a charged residue, arginine, at a critical point (P14) in the reactive center region, which prevents loop insertion into the beta-sheet and thereby precludes inhibitory properties. To test whether loop insertion is prevented in ovalbumin we have examined the properties of two forms of ovalbumin: the native protein and S-ovalbumin, a form that forms spontaneously from native ovalbumin and has increased stability. Calorimetric measurements showed that S-ovalbumin was more stable than ovalbumin by about 3 kcal mol-1. CD spectra, which indicated that S-ovalbumin had less alpha-helix than native ovalbumin, and 1H NMR spectra, which indicated very similar overall structures, suggest limited conformational differences between the two forms. From comparison of the susceptibility of the reactive center region of each protein to proteolysis by porcine pancreatic elastase and by subtilisin Carlsberg, we concluded that the limited native-to-S conformational change specifically affected the reactive center region. These data are consistent with a structure for S-ovalbumin in which part of the reactive center loop has inserted into beta-sheet A to give a more stable structure, analogously to other serpins. However, the rate of loop insertion appears to be very much lower than for inhibitory serpins.(ABSTRACT TRUNCATED AT 250 WORDS)     

Suppression of the facile latency transition of alpha(1)-antitrypsin variant M(malton) by stabilizing mutations

Many genetic variants of alpha(1)-antitrypsin (alpha(1)AT) are associated with early onset emphysema and liver cirrhosis. We previously found that although the stability and inhibitory activity of the human alpha(1)AT variant M(malton) (Phe52-deleted) are comparable to those of wild-type alpha(1)AT, the M(malton) variant spontaneously undergoes a conformational change to a more stable, inactive, latent form under physiological conditions. Here, we show that insertion of an exogenous peptide having a sequence corresponding to the first strand of beta-sheet C (s1C) is facilitated in M(malton) alpha(1)AT, suggesting that the endogenous s1C and reactive center loop are easily released from beta-sheet C, thus promoting latency conversion. When additional stabilizing mutations were introduced into M(malton) alpha(1)AT, they suppressed the conformational defect of this variant: the latency transition was greatly retarded, presumably by strengthening the interactions between s1C and beta-sheet C.     

Plasminogen activator inhibitor 1. Structure of the native serpin, comparison to its other conformers and implications for serpin inactivation

The crystal structure of a constitutively active multiple site mutant of plasminogen activator inhibitor 1 (PAI-1) was determined and refined at a resolution of 2.7 A.The present structure comprises a dimer of two crystallographically independent PAI-1 molecules that pack by association of the residues P6 to P3 of the reactive centre loop of one molecule (A) with the edge of the main beta-sheet A of the other molecule (B).Thus, the reactive centre loop is ordered for molecule A by crystal packing forces, while for molecule B it is unconstrained by crystal packing contacts and is disordered.The overall structure of active PAI-1 is similar to the structures of other active inhibitory serpins exhibiting as the major secondary structural feature a five-stranded beta-sheet A and an intact proteinase-binding loop protruding from the one end of the elongated molecule. No preinsertion of the reactive centre loop is observed in this structure.A comparison of the present structure with the previously determined crystal structures of PAI-1 in its alternative conformations reveals that, upon cleavage of an intact form of PAI-1 or formation of latent PAI-1, the well-characterised rearrangements of the serpin secondary structural elements are accompanied by dramatic and partly unexpected conformational changes of helical and loop structures proximal to beta-sheet A.The present structure explains the stabilising effects of the mutated residues, reveals the structural cause for the observed spectroscopic differences between active and latent PAI-1, and provides new insights into possible mechanisms of stabilisation by its natural binding partner, vitronectin.     

Crystallization and X-ray diffraction data of the cleaved form of plasminogen activator inhibitor-1

To characterize the structural requirements for the conformational flexibility in plasminogen activator inhibitor-1 (Pal-1) we have crystallized human PAI-1, carrying a mutation which stabilizes PAI-1 in its substrate form. Crystallization was performed by the hanging drop diffusion method at pH 8.5 in the presence of 19% (w/v) polyethyleneglycol 4000 as a precipitant. The crystals appear after 3 days at 23°C and belong to the monoclinic space group C2 with cell dimensions of a=151.8 Å, b=47.5 Å, c=62.7 Å, and β=113.9°, and one molecule in the asymmetric unit. The X-ray diffraction data set contains data with a limiting resolution of 2.5 Å. Biochemical analysis of the redissolved crystals indicated that during the crystallization process, cleavage had occurred in the active site loop at the P1-P1′ position. The availability of good-quality crystals of the cleaved form of this serpin will allow its three-dimensional structure to be solved and will provide detailed information on the structure-function relationship in PAI-1. © 1995 Wiley-Liss, Inc.     

Structural determinants in the stability of the serpin/proteinase complex

Serpins inhibit serine proteinases through formation of stable 1:1 complexes. In this study we have evaluated the effects of PAI-1 neutralizing antibodies (MA) on the stability of PAI-1/proteinase complexes, partially destabilized through prolongation of the reactive center loop. MA-8H9D4, reacting with residues Arg(300), Gln(303), and Asp(305), had no effect on the stability. In contrast, MA-33H1F7 and MA-55F4C12, reacting with alpha-helix F and the turn connecting hF with s3A, affected significantly and proteinase-dependently formed PAI-1/proteinase complexes. That is, MA-33H1F7 increased the stability of both PAI-1/t-PA and u-PA complexes (7- and 3-fold, respectively) whereas MA-55F4C12 stabilized PAI-1/t-PA complexes (3-fold) but destabilized PAI-1/u-PA complexes (2-fold). It is concluded that interference with the docking site of the cognate proteinase in the preformed serpin/proteinase complex may affect the intrinsic stability. We hypothesize that this is the consequence of a decreased or increased torsion of the RCL on the catalytic triad in the proteinase.